Horus Vision 1 650‐588‐8862
Horus Vision
FALCON 5-20 x 50 Model 2000 series
User’s Manual 1st Edition July 2013
July 01, 2013. Copyright 2013 Horus Vision, LLC. All rights reserved. Patent pending. Written consent of Horus Vision LLC is required to copy or use any of the material in this manual.
Horus Vision 2 650‐588‐8862
CONTENTS
Safety Warning ...................................................................................................................................................................... 3
About Horus Vision ............................................................................................................................................................... 3
Getting Started ...................................................................................................................................................................... 4
Mounting Your Horus Scope ...................................................................................................................................... 4
Elevation and Windage Turrets .................................................................................................................................. 5
Zeroing Your Horus Scope ......................................................................................................................................... 6
Adjusting for Parallax ................................................................................................................................................. 7
Slipping the Dials to Zero ........................................................................................................................................... 8
Introduction to the Falcon Rifle Scope ............................................................................................................................... 9
Key Features .............................................................................................................................................................. 9
Key User Controls .................................................................................................................................................... 10
Reticle ................................................................................................................................................................................... 11
TReMoR2 ................................................................................................................................................................. 11
H59 ........................................................................................................................................................................... 12
H25 ........................................................................................................................................................................... 13
H37 ........................................................................................................................................................................... 14
Horus Grid ................................................................................................................................................................ 14
Illumination .......................................................................................................................................................................... 15
Adjustable Rheostat ................................................................................................................................................. 15
Battery ...................................................................................................................................................................... 16
Night Vision Devices ................................................................................................................................................ 16
Power Ring ........................................................................................................................................................................... 17
Diopter Adjustment Ring .................................................................................................................................................... 18
Additional Information ........................................................................................................................................................ 19
Technical Data ..................................................................................................................................................................... 20
Falcon Scope Specifications .................................................................................................................................... 20
Reticle Specifications ............................................................................................................................................... 20
General Care ........................................................................................................................................................................ 21
Warranty ............................................................................................................................................................................... 22
Legal Notice ......................................................................................................................................................................... 23
Contact ................................................................................................................................................................................. 24
Horus Vision 3 650‐588‐8862
SAFETY WARNING Always use great care with all firearms. A mistake in judgment or lapse of attention can result in serious injury or death.
The information in this manual, while believed to be accurate at the date of publication, is not warranted or represented to
be accurate, correct, or useful for any particular purpose. Use the information in this manual with caution and common
sense, and verify it with respect to your own firearms before use.
The author and publishing company accept no responsibility for errors in the information presented herein, or for
accidents, injuries, damage or any other problems which might arise as a result of your use of the information contained
in this book, and expressly disclaim all liability for injuries, death and damages, whether direct, incidental, consequential,
punitive or otherwise.
ABOUT HORUS VISION
Horus’ cutting-edge technology improves shooting accuracy at extended ranges and increases the likelihood of a first-
round hit. Our patented reticles are an evolutionary advancement in shooting methodology, replacing outdated mildots and
reducing the need to dial adjustment knobs. Horus’ simplified shooting methodology improves accuracy at any distance
and can make anyone an expert marksman. Horus also leads the way in ballistics software. Our ATrag™ ballistics
algorithms were developed and refined by the former chief of ARDEC's small-arms division, William C. Davis. Horus Vision
was founded in 2000 and is headquartered in San Bruno, California.
Horus Vision 4 650‐588‐8862
GETTING STARTED
MOUNTING YOUR HORUS SCOPE
The Falcon requires 30mm rings, which are available in steel and aluminum. Steel rings offer enhanced durability under
extreme conditions, but they also weigh more. Rings are generally available in four different heights: low, medium, high
and extra high. The choice depends upon your rifle’s configuration and your normal body position on the rifle. Rings may
come attached to a one-piece base or as separate units. Separate bases or other “riser” type mounting systems may also
be used for raising scope height.
1. Mount the bottom portion of the rings to the rifle’s mounting rail, making sure that the spacing is correct so the
rings won’t interfere with the scope’s turrets.
2. Place the scope on the bottom portion of the rings, positioning it far enough rearward to provide a clear field of
view (FOV).
3. Attach the top portion of the ring, tightening the screws enough to prevent the scope from falling out of the
mounts, but loose enough to enable you to adjust the scope forward and aft and to rotate the scope to ensure a
level reticle.
4. Focus the ocular by adjusting the rear-most ring on the eyepiece. The reticle should be crisp against a distant
object or bright surface. The diopter is adjustable to +/- -2, +1 so the scope can be used with or without corrective
lenses.
5. To establish proper eye relief, hold your rifle in a stable shooting position and close your eyes. Position the rifle
into your shoulder as if firing, and then open your eyes. If the eye relief position is correct, you shouldn’t see any
black or hazy outer ring (vignette effect) within the FOV. If the image is not complete or clear, lower the rifle and
gently slide the scope forward or aft in the rings, and then repeat the above exercise. It helps to have someone
move the scope while you maintain position. Continue this procedure until the image is correctly viewed through
the eyepiece when you open your eyes. Once you’re satisfied that the scope is properly aligned on the rifle,
repeat this exercise four or five times in quick succession to ensure that your positioning is correct. If you intend to
fire from alternate positions regularly, check eye relief in those positions as well, since they’ll change the
relationships between shoulder, head and arms. Set up your eye relief for whatever body position you will most
likely use the majority of the time.
6. Before tightening the top portion of the rings, place a spirit level on the elevation turret to check level against the
rifle’s receiver. If the rifle has a Picatinny top rail on the receiver, use that surface as the index to level the scope
off of. If no rail is available, use the best horizontal surface you can find, such as the bottom metal portion of a bolt
action with the floor plate open or magazine removed. While leveling the reticle by eye will work at close ranges,
minor level errors will affect use of reticle grid and knob adjustments at farther targets.
7. When satisfied with eye relief and reticle level, tighten the scope ring screws to 15-20 inch-pounds of pressure.
Over-tightening can damage the scope tube.
Horus Vision 5 650‐588‐8862
ELEVATION AND WINDAGE TURRETS
Your Horus scope is designed to allow all elevation and windage adjustments to be made within the reticle, as opposed to
the conventional method of dialing target knobs or ballistic drop compensating (BDC) knobs. However, your Horus scope
also has knobs for elevation and windage adjustments with audible clicks, eliminating the need to take your eyes off the
target. Rotate clockwise for up/right adjustment.
1. Unscrew and remove the knob cap by turning it counter-clockwise in relation to the scope’s body.
2. Use the elevation knob on top of the scope to make adjustments for bullet drop compensation. Rotate the
elevation knob clockwise to move the intended point of impact (POI) up in the field of view, rotate counter-
clockwise to move the intended point of impact (POI) down in the field of view. Use the windage knob on the right
side of the scope to make adjustments for wind compensation. Rotate the windage knob clockwise to move the
intended POI right in the field of view, and rotate clockwise to move the POI left. Each increment (or click)
equates to a 0.1 mil change to the bullet impact point, and 10 clicks is equal to 1 mil.
3. When finished making adjustments, return the knob cap to the knob and secure by turning it clockwise.
Figure 1: Rotating the elevation turret clockwise will move the POI up in the field of view (top). Rotating the windage turret clockwise will move the POI right in the field of view (bottom).
Horus Vision 6 650‐588‐8862
ZEROING YOUR HORUS SCOPE
While Horus scopes can be zeroed at any distance, it is recommended that the zero be exactly 100 meters or yards.
Regardless of zero range, it is critical that the measurement be precise.
The following recommended method of zeroing will eliminate problems while saving time and ammunition:
1. Measure the distance from the rifle to the target to ensure a precise “zero” measurement.
2. Use an 18x18-inch (or larger) sheet of paper with ½-inch vertical and horizontal lines drawn to intersect at the
center of the paper. Use a plumb or level to attach the paper to a target backer so that the lines are level.
3. Set your scope power ring to maximum power (20x), and make sure the elevation and windage turrets are set to
0.
4. Superimpose the Horus reticle over the vertical and horizontal lines on your target to center the reticle precisely
on your intended point of impact (POI).
5. Fire your first shot. Adjust the elevation and windage turrets to center the shot at the intersection of the vertical
and horizontal lines on the target. If the round’s POI is observable, use the Horus reticle’s mil-based grid to
measure the deviation from the intended POI, then dial the exact corrections (in 0.1 mil increments) using the
elevation and windage turrets. For example, if your first shot impacts 2 mils low and 1.5 mils right, dial 2 mils (20
clicks) up and 1.5 mils (15 clicks) left (see the previous section for information about rotating the turrets).
6. Center the reticle over your intended POI and fire another round. Repeat steps 5 and 6 until repeated shots are
successfully centered at the intersection of the target’s vertical and horizontal lines.
7. Fire a five round group at a clean target. Adjust zero as needed and confirm with additional groups until it
perfectly matches your intended POI.
8. Lock the elevation and windage turrets into place by pushing them in toward the center of the scope. From this
point on, use only the gridlines on the Horus reticle—not the turrets—to make adjustments for wind and elevation.
Remember to always verify your zero and develop data with the ammunition that you will be using for any sport shooting
or hunting purpose.
Horus Vision 7 650‐588‐8862
ADJUSTING FOR PARALLAX
Parallax is a perceived displacement or difference in the apparent position of an object viewed along two different lines of
sight. In rifle scopes, parallax error occurs when the reticle and target are in different focal planes. This results in the
reticle crosshairs appearing to move to different points on the target when your eye moves behind the scope’s eyepiece.
To eliminate aiming errors caused by parallax, adjust the parallax adjustment (also called side focus) knob until the target
appears in the same plane of focus as the reticle. This will give the appearance of the reticle crosshairs “painted” on your
target, so you can be confident in an accurate shot. Even experienced shooters can significantly improve accuracy with
proper parallax adjustment.
1. Once the scope is properly mounted and zeroed, securely position the rifle on a bench.
2. If you know the distance to the target, turn the knob so that the corresponding distance (in yards) lines up with the
index mark on the body of the scope. If you don’t know the distance to the target, first set the scope to the highest
power (20x), and then turn the side focus knob until you see a sharp image of the target.
3. Look through the scope and shift your eye position from side-to-side and note if the crosshairs appear to move
across the target.
4. Alternately turn the parallax adjustment knob and then shift your eye position, until you have eliminated the
illusion that your crosshairs are moving across the target. It may take several tries before you’ve found the proper
adjustment.
5. Fire a five round group at a clean target to see how much your grouping has improved.
Horus Vision 8 650‐588‐8862
SLIPPING THE DIALS TO ZERO
Your Horus scope is designed to allow all deviations from zero for windage and elevation to be made within the reticle, as opposed to the conventional method of dialing windage and elevation turrets. You may elect to index the turrets on “0” once the rifle is zeroed to allow a return point for zero in the event you adjust the turrets for any reason.
To set the dials to zero in this manner:
1. Remove the turret cap by unscrewing. 2. Next, loosen the turret bolt on top of the turret using a coin, such as a dime. 3. Once the turret bolt is loose or removed, carefully pull the turret from its base. 4. Rotate it until the “0” mark indexes on the thin white line, and push the turret back down into place. Take care not
to inadvertently turn the turret while performing this procedure, as it will alter the scope’s zero point. Once the turret has been set to “0”, reinstall and tighten the bolt. Always verify zero after resetting the dials.
Important: Do not attempt to loosen the screws beneath the turret bolts of the windage and elevation turrets, as these are only to be removed by a Horus Vision authorized warranty station. (Do these exist on Falcon?)
Figure 2: Slipping the elevation and adjustment turrets to “0” will provide a definitive index point to return to in the event you ever adjust them off zero.
Horus Vision 9 650‐588‐8862
INTRODUCTION TO FALCON RIFLESCOPE
The Falcon™ is specifically designed for extremely heavy recoiling rifles. The solid-steel tube allows you to really clamp
down on the scope without adverse effects to the parallax mechanism. The scope and Horus reticle combination allows
you to unleash the accurate long-range potential of your rifle and ammo. Independent optical tests show that the Falcon
performs right alongside the highest quality scopes on the market, in terms of light transmission and distortion free clarity,
at almost half the price.
The Falcon comes with your choice of one of the following four reticles: TReMoR2, H59, H25, H37. See this manual’s
Reticle section for details.
KEY FEATURES:
5-20x50mm power
Solid steel tube for nearly indestructible toughness
6 position rheostat with alternating “OFF”
Turret covers protect knobs from elements and unintentional resetting
Superb optics at affordable pricing
Adjustable side parallax
Provides 3.5” eye relief
Reticle placement in the first focal or image plane (1FP), allowing calibrated use of all mil measurements and
holds at any magnification
Waterproof, dust proof, fog proof, and shock proof
Choice of illuminated reticle: TReMoR2, H59, H25 or H37
Speed Shooting reticle options for placing elevation, wind and moving target holds (with TReMoR2 and H59)
Horus Grid:
o Patented reticle grid for placing vertical and horizontal adjustments visually while looking through scope,
no dialing knobs or counting clicks
o Second Shot Correction™ for fail-safe hit after missed first shot
o Measure target image size to assist in range finding
Horus Vision 10 650‐588‐8862
KEY USER CONTOLS
Figure 3: The Falcon multi-purpose rifle scope. Numbers correspond to key user controls in following list.
1. Diopter adjustment ring
2. Rheostat knob
3. Zoom/power adjustment ring
4. Windage turret
5. Elevation turret
6. Parallax adjustment knob
7. 30 mm steel tube
8. 50 mm objective bell
Horus Vision 11 650‐588‐8862
RETICLE The Falcon comes with your choice of one reticle from the following four: TReMoR2, H59, H25, H37. The TReMoR2 and
H59 reticles offer advanced Speed-Shooting features for rapid acquisition of targets out to 600 meters. The Horus Grid is
included in all Horus reticles for targets from 0 to 1500 meters and beyond.
TReMoR2
The TReMoR2 reticle is all about faster shooting. Advanced speed-shooting markers for wind and elevation adjustments
are strategically placed along drop lines, making adjustments lightning fast. And the TReMoR2 is a refined-mil reticle,
providing precision mil markings subtending down to 0.1 mils. The Horus Grid is also included for traditional mil-based
shooting. Unobtrusive holdover crosses extend the Horus Grid while allowing for a clear uncluttered view.
Learn More: TReMoR2 Manual
For more features and detailed instructions, see the TReMoR2 User Manual available on the Horus Vision website:
http://www.horusvision.com/download/tremor2manualurlgoeshere
Figure 4: The TReMoR2 reticle shown at high magnification (LEFT) and low magnification (RIGHT).
Horus Vision 12 650‐588‐8862
H59
The H59 is an improved sniper reticle, providing more windage and elevation hold capability than any optic in its class.
The H59’s advanced features include speed-shooting markers to rapidly engage targets without knowing range, and
Moving Target Holds. The Horus Grid is also included for traditional mil-based shooting. Unobtrusive Holdover Dots
extend the Standard Horus Grid while allowing for a clear uncluttered view.
Learn More: H59 Manual
For more features and detailed instructions, see the H59 User Manual available on the Horus Vision website:
http://www.horusvision.com/download/h59manualurlgoeshere
Figure 5: The H59 reticle shown at high magnification (LEFT) and low magnification (RIGHT).
Horus Vision 13 650‐588‐8862
H25
The H25 offers a straight-forward implementation of the Horus Grid. Horizontal and vertical adjustments are made visually while looking through the reticle without turning knobs or counting clicks. Shooters will enjoy its precision and reach out to 1500+ meters. Hunters in particular will appreciate the Shooter’s Minute of Angle (SMOA) inverted "L" range finder. Bold duplex stadia guides for low light help shooters recognize center point when finer reticle markings become too faint to see.
Learn More: H25 Manual
For more features and detailed instructions, see the H25 User Manual available on the Horus Vision website:
http://www.horusvision.com/download/h25manualurlgoeshere
Figure 6: The H25 reticle shown at high magnification (LEFT) and low magnification (RIGHT).
Horus Vision 14 650‐588‐8862
H37
The H37 is highly recommended for extreme-range shooters. Its central targeting grid is 4 mills higher in the field of view, allowing more of the Horus Grid to be used at increased magnification. Thus, the H37 can accommodate longer-range cartridges.
Learn More: H37 Manual
For more features and detailed instructions, see the H37 User Manual available on the Horus Vision website:
http://www.horusvision.com/download/h37manualurlgoeshere
Figure 7: The H37 reticle shown at high magnification (LEFT) and low magnification (RIGHT).
HORUS GRID
All Horus reticles include the Horus Grid for traditional mill-based shooting from 0 to 1500 meters and beyond. The
patented grid allows you to place adjustment holds visually while looking through the reticle, without dialing knobs or
counting clicks. Other features include Second Shot Correction™ for a fail-safe hit after a missed first shot, measuring
targets to assist in range finding, and more.
Horus Grid Manual
For more features and detailed instructions, see the Horus Grid User Manual available on the Horus Vision website:
http://www.horusvision.com/download/horusgridmanualurlgoeshere
Horus Vision 15 650‐588‐8862
ILLUMINATION
Illumination is provided to help you in low-light situations where the dark target image and normally black
reticle blend together. This feature is very useful in last light/first light conditions, where night vision devices
aren’t effective due to excessive ambient light.
The illumination pattern varies depending on which reticle you’re using. Consult reticle user manuals for
details on illumination patterns and instructions on placing holds using the illumination pattern.
ADJUSTABLE RHEOSTAT
The Falcon’s illumination is controlled by a rheostat knob. The rheostat adjustment knob features 6 brightness
settings with alternating OFFs.
To adjust rheostat settings:
1) Remove the rheostat cap by unscrewing (counter-clockwise).
2) Turn illumination on by aligning any number on the illumination knob to the white dot on the scope
body.
3) Adjust brightness by selecting a number 1 – 6, 1 being dimmest, 6 being brightest. Select the lowest
setting that provides adequate illumination for use. Using less illumination will help your eye resolve
the target image better through the riflescope. When the rheostat is at its highest settings in very dark
conditions, the actual target grid of the Horus reticle may be visible to the point where detailed hold
points are usable, so long as a target image can be seen.
4) Turn illumination off by aligning the knob’s “OFF” setting with the white dot on the scope’s body.
Figure 8: The Falcon’s rheostat knob is shown set to level 3.
Horus Vision 16 650‐588‐8862
BATTERY
The CR2032 battery used for illumination should last 20 hours or more, if not inadvertently left on. The
rheostat does not feature an auto-shutoff function so remember to return it to the OFF setting when not in
use.
To change the battery:
1) Remove the rheostat cap by unscrewing (counter-clockwise).
2) Use a fingernail or small flat screwdriver to carefully remove the old battery. Take care not to damage
the contacts under the battery if using a tool to remove it.
3) Replace the battery with a fresh CR2032 with the (+) side up, snapping the battery in place until it
lays flush in the knob.
4) Replace the threaded portion of the knob in reverse of the way you removed it. Once the cap is tight,
check to ensure you haven’t turned the rheostat on. If you over tighten the cap, the actual illumination
knob will turn and activate the reticle light.
NIGHT VISION DEVICES
When using a night vision device (NVD), the reticle and its illumination feature can be used in various
brightness combinations to achieve contrast between the target image and reticle hold points. When the NVD
is placed in front of the scope’s objective (front end) the illuminated pattern will appear its normal red color
contrasting nicely with the black/green, black/amber or black/white target image. If using an ocular (rear)
mounted NVD, the reticle image will appear black against the black target image, rendering illumination of the
reticle less effective.
Horus Vision 17 650‐588‐8862
POWER RING
The Falcon’s power ring controls magnification from 5 to 20 times. Because the Falcon’s reticle is in the 1st
focal plane, shooters have the upmost advantage to mil a target at any given power. The ring contains
numbers specifying specific power factors.
To adjust the power setting:
Increase magnification by turning the power ring clockwise.
Decrease magnification by turning the power ring counter clockwise.
Select a specific power factor by aligning the desired number on the power ring to the white dot on
the scope’s body.
Figure 9: The Falcon’s power ring is shown set to 18x.
Horus Vision 18 650‐588‐8862
DIOPTER ADJUSTMENT RING
Should we include a section on diopter ring? If so, what is pertinent to include in manual?
Horus Vision 19 650‐588‐8862
ADDITIONAL INFORMATION
DOCUMENTS RELATED TO FALCON
Horus Vision Tactical Manual: http://www.horusvision.com/download/manual_Horus_Tactical.pdf
TReMoR2 Manual http://www.horusvision.com/download/tremor2manualurlgoeshere
H59 Manual http://www.horusvision.com/download/h59manualurlgoeshere
H25 Manual http://www.horusvision.com/download/h25manualurlgoeshere
H37 Manual http://www.horusvision.com/download/h37manualurlgoeshere
Standard Horus Grid Manual http://www.horusvision.com/download/horusgridmanualurlgoeshere
Horus Grid Webpage: http://osc.horusvision.com/standard_horus_grid.php
Links for all Horus manuals and spec sheets: http://osc.horusvision.com/manuals.php
HORUS ATRAG™ BALLISTICS SOFTWARE
For even greater accuracy, Horus ATrag Ballistics Software can be used in combination with Horus scopes and reticles.
Our ballistics software lets you take combat-proven aiming solutions into the field so you are instantly ready for any
shooting conditions. ATrag enhances any mil-based reticle system.
ATrag Manual: http://www.horusvision.com/atragmx.php
ATragMX Product Page: http://www.horusvision.com/atragmx.php
More ATrag Products: http://www.horusvision.com/software.php
Horus Vision 20 650‐588‐8862
TECHNICAL DATA
FALCON SCOPE SPECIFICATIONS
Specifications:
Power .................................. 5-20x50
Length ................................. 16 (40.64cm)
Weight ................................. 33.20z (940g)
Tube Diameter..................... 30mm
Wall Thickness .................... 1.5mm
Material: aluminum and steel
Tube .................................... 2 pieces
Color .................................... black
Exterior Finish ..................... matte anodized
Shockproof .......................... 2000 g
Water-resistant .................... yes (3 meters)
Dustproof ............................. yes
Fogproof .............................. yes
Warranty .............................. 1 year limited
Twilight Factor ..................... 15.8 @ 5x - 31.6 @ 20x
Reticle ................................. H25 or H37
Reticles ................................ 1st focal plane
Reticle Illumination .............. yes
Battery Size ......................... CR2032
Battery Life .......................... 20 hours +
Rheostat .............................. yes
Rheostat Positions .............. 6 positions, alternating off
Lenses ................................. 11+ reticle
Lens Coating ....................... multi-coated
Objective Lens .................... 50mm
Field of View ........................ 6.4 - 1.9 m (at 100m)
Eye Relief ............................ 3.5" - 3.3" (90-85mm)
Exit Pupil ............................. 10.0 - 2.5 mm
Ocular Type ......................... rapid European focus
Diopter Adjustment .............. more than (-2,+1)
Elevation Increment ............ 1 click = .10 mil radian
Elevation Adj. Range: more than 16.9 mils (58 MOA)
Windage Increments ........... 1 click = .10 mil radian
Windage Adj. Range ........... more than 16.3 mils (56 MOA)
Turret Caps ......................... yes
Turret Type .......................... high
Parallax ............................... side parallax 50 m to infinity
RETICLE SPECIFICATIONS
See these user manuals for reticle specifications and technical information:
TReMoR2 Manual ............... http://www.horusvision.com/download/tremor2manualurlgoeshere
H59 Manual ......................... http://www.horusvision.com/download/h59manualurlgoeshere
H25 Manual ......................... http://www.horusvision.com/download/h25manualurlgoeshere
H37 Manual ........................ http://www.horusvision.com/download/h37manualurlgoeshere
Horus Vision 21 650‐588‐8862
GENERAL CARE
Your Horus scope requires very little maintenance. The following simple steps will ensure maximum optical performance:
Wipe clean all exposed optical surfaces occasionally with the lens cloth provided.
Maintain metal surfaces by removing any dirt, dust or sand with a soft brush to avoid scratching the finish; then
wipe down with a damp cloth, followed by a dry cloth.
For best luster and corrosion resistance, finish by wiping metal surfaces with a silicone cloth.
Protect your scope with lens caps when not in use.
Horus Vision 22 650‐588‐8862
WARRANTY
HORUS LIMITED WARRANTY
1. HORUS VISION, LLC warrants this product against defects in workmanship or materials for a period of one (1) year
after the date of the original retail purchase. During this warranty period, HORUS VISION, LLC will repair or replace, at its
option, a defective product or part without charge to you. You will be responsible for transportation charges, if any, for
delivering the product to and from HORUS VISION, LLC. This warranty extends only to defects in workmanship, and does
not extend to damage to products or parts which result from alteration, repair, modification, faulty installation, or damage
caused by accident, abuse, misuse, maintenance, mishandling, misapplication, or use in violation of the instructions
furnished by HORUS VISION, LLC.
2. Any repaired or replacement parts furnished in fulfillment of this warranty are warranted only for the unexpired portion
of the original warranty.
3. Eligible customers seeking services for Horus products covered under this Limited Warranty must first obtain a Return
Material Authorization number ("RMA"), by contacting Horus Vision customer service at 650-588-8862.
4. To obtain warranty service, ship the product postpaid and fully insured to HORUS VISION, LLC., 598 San Mateo Ave.,
San Bruno, California 94066, together with a copy of your bill of sale, your RMA number, your name and address, and a
description of the problem. All products returned for warranty service must be carefully packed in the original packing
materials.
For full warranty details, visit Horus Vision’s website warranty page: http://www.horusvision.com/terms.php.
Horus Vision 23 650‐588‐8862
LEGAL NOTICE
HORUS VISION®, the EYE OF THE FALCON logo, 1ST HIT and 1ST HIT TECHNOLOGIES are registered trademarks of Horus Vision, LLC and may not be used in any manner without express permission from Horus Vision, LLC. SECOND SHOT, TACTICAL SOLUTIONS and TARGETING SOLUTIONS are trademarks of Horus Vision, LLC and may not be used in any manner without express permission from Horus Vision, LLC.
Horus Vision software products and written and visual materials are protected by U.S. and international copyright protection and may not be used in any manner without express permission from Horus Vision, LLC.
A wide variety of scopes, reticles, software, computer systems, and other products associated with shooting and ballistics (“Horus Vision systems”) are exclusively owned by Horus Vision, LLC and are protected by issued patents in the United States, including U.S. Pat. Nos. 5,920,995, 6,032,374, 6,453,595, 6,516,699 and 6,681,512, issued foreign counterparts, as well as numerous additional pending patent applications in the United States and foreign jurisdictions, including, but not limited to Europe, Japan, Israel, Canada and Australia. Manufacture, sale, importation or use of the Horus Vision systems requires a license from Horus Vision, LLC. For more specific information on obtaining a license, please contact Horus Vision, LLC.
Nothing contained herein should be construed as granting, by implication, estoppels or otherwise, any license or right to use any Horus Vision, LLC intellectual property.
© 2011 Horus Vision, LLC. All rights reserved.
Horus Vision 24 650‐588‐8862
CONTACT
Horus Vision, LLC 598 San Mateo Avenue San Bruno, CA 94066 Phone: 650-588-8862 Fax: 650-588-6264 E-mail: [email protected] Website: www.horusvision.com