137
Propane Hose
1” X-treme Low Temp Bobtail Hose
Large Transfer Hose
For liquid or gaseous transfer of propane. 350 lb working pressure. All sizes are UL21 and CGA Type 1 approved. Cover is pin pricked for gas dissipation.
This hose is an extremely flexible low temperature product made specifically for bobtail delivery reel systems. It reels on and off the truck easily and also has improved abrasion resistance for longer life.
This hose is manufactured with abrasion resistant cover and textile braid reinforcement. Designed for long life in transport unloading, bobtail loading and other similar large volume transfer operations.
Hose is stocked in 750 foot reels. We will cut to length to match your requirements. We also make custom fitted hose assemblies. Let us know your end fitting requirements and we will crimp the ends on for you.
Hose is stocked in 100 ft., 125ft., and 150ft. lengths. Hose is factory pressure tested and comes coupled with crimped on 1” Male NPT fittings. Other lengths available by special order.
Pressure test documentation is included with each assembly.
Stocked lengths are 15 ft. and 20 ft. Other lengths available by special order. Fittings may be crimped on or bolt on.
I.D O.D Spirals Lbs per ft.
1/4” .610”
4
.15
3/8” .760” .22
1/2” .937” .31
3/4” 1.25” .51
I.D O.D Braids Lbs per ft.
1-1/4” 1.815” 2 .85
1-1/2” 2.156” 3 1.18
2” 2.750” 3 1.87
Tube:Cover:Reinforcement:Temp. Range:
Tube:Cover:Reinforcement:Temp. Range:
Tube:Cover:Reinforcement:Temp. Range:
Do not use male swivel couplings, screw-together reattachable fittings or any type of couplings that use O-ring sealing surfaces
Black NitrilePerforated Black NeopreneMultiple Textile Spirals-40OF to +180OF(Propane should never beconveyed over 140OF.)
Black NitrilePerforated Black NeopreneMultiple Textile Spirals-65OF to +180OF(Propane should never beconveyed over 140OF.)
Black NitrilePerforated Black NeopreneMultiple Textile Braids-40OF to +180OF(Propane should never beconveyed over 140OF.)
Construction
Construction
Construction
Crimped Fitting
Bolted Fitting
Hose
138
Power-Swage Hose CouplingsPower-Swage couplings are made for use in hydraulic swaging machines. Orders for hose assemblies in sizes 3/8” thru 1” will be supplied with these couplings unless otherwise specified.
PartNumber
Nom Hose Size
PipeSize
604 3/8” 3/8”
804 1/2” 1/2”
1204 3/4” 3/4”
1600 1” 1”
Clamp Style Hose CouplingsClamp style hose couplings offer a reliable assembly that can be field installed. The outer clamps compress the hose for a leak tight seal.
M3162-12
M3162-32S
PartNumber
Nom Hose Size
ConnSize
M3162-8 1/2” 1/2” MNPT
M3162-12 3/4” 3/4” MNPT
M3162-16 1” 1” MNPT
M3162-20 1-1/4” 1-1/4” MNPT
M3162-24 1-1/2” 1-1/2” MNPT
M3162-32 2” 2” MNPT
M3162-32S 2” 3-1/4” ACME
Hose
804
SS Wire Braid Propane Hose
Part Number Nom I.D. Lbs per ft.
4K 3/16” .11
5K 1/4” .13
6K 5/16” .18
8K 13/32” .21
10K 1/2” .29
This hose has a synthetic rubber high temperature tube, one stainless steel wire braid and two textile braids. Extensively used for liquid carburetion service or anywhere the extra strength of the wire braid is desired.Reusable couplings shown below are manufactured specifically for this product.
Construction
Male Couplings For SS Wire Braid
PartNumber
FitsHose Size
PipeSize
112-4-4 4K 1/4”
112-4-66K
1/4”
112-6-6 3/8”
112-8-8 8K 1/2”
112-8-1010K
1/2”
112-12-10 3/4”
Flare Couplings For SS Wire Braid
112-8-8
123-6
PartNumber
FitsHose Size
FemaleFlareSize
123-4 4K 1/4”
123-5 5K 5/16”
123-6 6K 3/8”
123-8 8K 1/2”
123-10 10K 5/8”
Angled Fittings
27720-6-6 6K 45O 3/8”
27920-6-6 6K 90O 3/8”
27720-6-6
27920-6-6
139
Hose
Hose Swivel Adapters
PartNumber
PipeSize
0107-6-6 3/8”
0107-8-8 1/2”
0107-12-12 3/4”
0107-16-16 1”
Hose swivel adapters are designed to prevent hose stress due to twisting during assembly and to reduce the need for unions at the hose couplings. The female swivel end of these adapters is a straight pipe thread with a 30O seat. All male pipe fittings that are used with these fittings must have the mating 30O bevel in order to effect a proper seal. Most hose couplings have this seat.
Male Hose Swivel Adapters
PartNumber
PipeSize
0207-6-6 3/8”
0207-8-8 1/2”
0207-12-12 3/4”
0207-16-16 1”
Female Hose Swivel Adapters
0107-8-8 0207-8-8
Hose-End SwivelsRugged leak free design allows complete 360O rotation of hose end valves for easy connections to fillers. Es-pecially helpful with stiff hoses in the cold of winter.
ME850SS-6 3/4” SwivelME850SS-8 1” Swivel
Typical Swivel Application
Aluminum Ferrules C3 Crimping ToolFor 3/16”, 1/4” and 3/8” I.D. hose ferrules. Press in vise, turn 90O and press again.
PartNumber
HoseO.D.
KF675-81 .675”
KF700-81 .700”
KF725-81 .725”
KF750-81 .750”
KF775-81 .775”
KF800-81 .800”
PartNumber
Hose O.D.
KF500-81 .500”
KF525-81 .525”
KF550-81 .550”
KF575-81 .575”
KF600-81 .600”
KF625-81 .625”
KF650-81 .650”
Aluminum ferrules are used to permanently crimp hose fittings on 1/4” & 3/8” hose.Sizes .500” thru .800” in .025” increments.
855 Heavy Duty Crimping ToolHeavy duty frame and hardened steel dies provide long service life and positive crimping. For 1/4” & 3/8” hoses
140
Barbed hose fittings offer a large variety of end fitting sizes and styles for 1/4” and 3/8” I.D. hoses. When properly installed and crimped with an associated ferrule, they provide a safe and flexible means of connecting equipment.
Hose
FemaleFlare
FemalePipe
MalePipe
InvertedFlare
9/16” LHAdapter
BarbSplicer
9/16”Left
How to order barb fittings
Barbed Hose Fittings
PartNumber
Hose Size
FlareSize
KF04-04NL1/4”
1/4”
KF04-06NS 3/8”
KF06-06NS3/8”
3/8”
KF06-08NL 1/2”
PartNumber
Hose Size Size
R12 1/4”9/16” LH
R12A 3/8”
R11 1/4” 9/16” RH
PartNumber
Hose Size
FlareSize
KA04-04MF 1/4” 1/4”PartNumber
Hose Size
G-642 1/4”
G-644 3/8”
POL Barbs
QCC Barb
PartNumber
Hose Size
POLConnection
970JR 1/4” 7/8” Hex
G-1655 1/4” Handwheel
PartNumber
Hose Size
FlowBTU/HR
ME518-25H 1/4” 200,000
Dash Size Fractional Size
04 1/4”
06 3/8”
G-1655
ME518-25H
970JR
PartNumber
Hose Size
PipeSize
KF04-02PS
1/4”
1/8”
KF04-04PS 1/4”
KF04-06PS 3/8”
KF06-04PS
3/8”
1/4”
KF06-06PS 3/8”
KF06-08PS 1/2”
Order I.D. Siszes Call out barb size firstEx: KF-04-06NS
1/4” Barb 3/8” Flare Swivel
For auto changeover regulator inlets
Part numbers are sized in 1/16”
PartNumber Inlet Outlet
1300
9/16” LH
1/4” MNPT
1300S1 3/8” MNPT
R19 9/16” LH
PartNumber
Hose Size
PipeSize
KF04-02RN1/4”
1/8”
KF04-04RN 1/4”
KF06-04RN3/8”
1/4”
KF06-06RN 3/8”
1/4”
141
Rubber PigtailFactory assembled 20” long rubber pigtail for connection to automatic changeover regulators.
40401-20
Typical Pigtail Connection
POL Adapter HosesFactory assembled hose assembly for connecting bulk cylinder to disposable cylinder appliances.Handwheel POL X 1”-20 swivel.
40407-6040407-144
-60” long-144” long
42421-6042421-144
-60” long-144” long
1”-20 Adapter HosesFactory assembled hose assembly for extending disposable cylinder appliance hoses.1”-20 male swivel X 1”-20 female swivel.
Hose
40410-20
Need something longer? We can also make these up from bulk hose stock to whatever length you require.
QCC Adapter
ME393-1QCC Male X 1/4” FNPT
1”-20 Disposable Cylinder Adapters
G-4921”-20 Male X
1/4 FNPT
G-4931”-20 Male X
9/16 LH
G-4881”-20 Female X
1/4 MNPT
Disposable CylinderBarbed Swivel Adapters
PartNumber
Hose Size
SwivelConnection
G-484 1/4” 1”-20 Fem
G-496 1/4” 1”-20 Male
G-484 G-496
MARSHALL
GA
S CO
NTR
OLS INC MODEL 250 SAN MA
RCOS TEXAS
VENT
142
Quick Connectors
1000 Series Standard Quick Connectors
HK Series Heavy Duty Quick Connectors
Gas Mate Series Quick Connectors
One-way general purpose quick connectors.Socket has shutoff. Plug is open.
Two-way heavy duty.(liquid or vapor service) quick connectors.Both socket and plug have shutoffs
Assembled Specs
Assembled Specs
Assembled Specs
Part Number Pipe Size Description
UL2-H161/4” FNPT
1/4” Socket
UL2-K16 1/4” Plug
UL3-H213/8” FNPT
3/8” Socket
UL3-K21 3/8” Plug
B4-H261/2” FNPT
1/2” Socket
B4-K26 1/2” Plug
Part Number Pipe Size Description
10o-0063/8” FNPT
3/8” Socket
100-506 3/8” Plug
100-0081/2” FNPT
1/2” Socket
100-508 1/2” Plug
100-0103/4” FNPT
3/4” Socket
100-510 3/4” Plug
1000 Socket
UL2-H16 Socket
100-008 Socket 100-508 Socket
11 Plug
UL2-K16 Plug
One-wayShutoff
One-wayShutoff
Two-wayShutoff
One-way shutoff for attaching appliances to gas lines. Plug has heat-sensitive element that shuts off the flow in the event of fire. For gas grills, small appliances, caster mounted restaurant equipment.AGA certified to 12” W.C. Pressure rated to 1,100 PSI.
Part Number Pipe Size Description
10001/4” FNPT
1/4” Socket
11 1/4” Plug
12003/8” FNPT
3/8” Socket
15 3/8” Plug
AssembledNumbers
PipeSize
BTU/HR Propane@ .3” W.C. Drop
Rated PressurePSIG
1000 & 11 1/4” 52,000 1100
1200 & 15 3/8” 52,000 1100
AssembledNumbers
PipeSize
BTU/HR Propane@ .3” W.C. Drop
Rated PressurePSIG
UL2-H16 & UL2-K16 1/4” 54,684 2700
UL3-H21 & UL3-K21 3/8” 93,744 2200
B4-H26 & B4-K26 1/2” 157,302 1500
AssembledNumbers
PipeSize
BTU/HR Propane@ .3” W.C. Drop
Rated PressurePSIG
100-006 & 100-506 3/8” 54,684 2700
10-008 & 100-508 1/2” 93,744 2200
100-010 & 100-510 3/4” 157,302 1500
143
Recreational
Humphrey Gas Lights Humphrey gas lights are available in 9 Series with preformed mantle or 9T Series with tie-on mantle. We stock two colors, Rustic Walnut and Pebble Gray. We can also special order other colors; Polished Brass, Classic Chrome, Natural Almond or Hunter Green.
9 Light
Replacement Parts
L13-2Preformed
Mantle
L13-6-5PKTie-on Mantle
5 Pack
L13-8-5PKClip-on Mantle
5 Pack
L24-15-6PKNose Seals
6 Pack
L6-20AHalf Frosted
Globe
L12-2ANose For
Preformed Mantle
L12-11ANose For
Tie-on Mantle
OPK Pendant KitFor mounting 1, 2, or3 gas lights to a ceiling.
L8-6CValve Assembly
L9-50APropane Nozzle
L10-71ABunsen
Falk Gas LightsFalk Gas Lights are designed for home, cottage, cabins or wherever lighting is required. Falk’s graceful curve design of solid polished brass highlights the quiet elegance of old world styling as well as providing a lifelong attractive finish.All Falk Gas Lights utilize a unique adjustable air shutter to maximize the brightest light even in the highest of places. You can depend on Falk gas lights to produce the brighest indoor lighting to meet your needs.
2703Single Wall Light
2705Double Wall Light
2707Double Ceiling Light
M3769Mantle
4Globe
144
Olympian Gas MatchesThree gas match models to choose from. All have adjustable flame, fuel viewing window and are refillable.GM-3 & GM-3X have battery operated continuous sparks.
GM-3X with 15” Flexible Extension
GM-3 14-3/4” Overall Length
GM-4 11” Overall Length
N60002.5 oz. Refill
Torches
Universal
BUTANEFUEL
OLYMPIAN GM3 CONTINUOUS IGNITION
OLYMPIAN GM3X CONTINUOUS IGNITION
Mr Heater Parts
UL
OPD
Mr Heater
F273116Safety Shutoff
F273607Hi-Med-Low Regulator
F273606Hi-Med-Low Regulator
w/Tank Union
F27311712” Thermocouple
F273164Burner Screen
NuWay Cast Iron TorchesExtermely popular with contractors. Two sizes to cover a wide range of uses. Torches have cast iron head, 18” handle and needle valve for flow adjustment. STD hose assembly shown below. Other hose lengths available.
STD TORCHESModel 4V 200,000 BTUModel 5V 500,000 BTU
TORCHES w/100% SAFETYModel 4VAC 200,000 BTUModel 5VAC 500,000 BTU5VAC
5V
145
Manchester Handiboy TorchLight weight 500,000 BTU portable propane torch. Bubble packed for easy point of purchase display. Comes with rolled steel head, 20” handle with wood grip, needle valve and 10 ft. hose.
8062
High Pressure SafetyHigh pressure safeties are designed for applications with gas pressures up to 25 psig. They prevent gas flow to the pilot and main burners in the event of flame failure. On models with flow interruption, gas flows only to the pilot during lighting operation.
H19HBrass
H19PBrass
High Pressure Safety specs
H19TA-3Aluminum
Torch Hose1/4 X 10 ft. 350# hose fitted POL X 1/4” MNPT
Torches
Manchester Powerjet Torch
806125NVBR
The Manchester Powerjet torch provides a large power jet brush flame for weed control, ice melting, fence clearing or other similar high heat outdoor procedures.The torch features a main gas trigger control and a wind proof pilot with needle valve adjustment at the operator’s handle. Heavy duty but light weight (2-1/2 lbs.).750,000 BTU/HR.
Needle ValvesOur most popular needle valve.High quality brass.User friendly knurned handwheel.1/4” FNPT in and out.
ModelPipeSize Side Port*
FlowInterruptor
H19H1/4” MNPT 1/8” MNPT
No**
H19P Yes
H19NA-41/4” FNPT 1/8” FNPT
No
H19TA-3 Yes
* The side ports are furnished capped or plugged as appropriate.** The side port on this safety is ported to the inlet of the valve.