Aeroquip®TEB 169
HoseShopAssembly Equipment & Price List
Table of Contents
Section I
Hose Assembly Equipment Electrical Options 1Hose Assembly Equipment Options 2 - 7 Option 1 (Basic) 2 - 3 Option 2 (Intermediate) 4 - 5 Option 3 (Advance) 6 - 7 Section II
Shop Layout 8
Section III
Inspection Balls 9
Section-IV
Equipment Bulletins 10Notice of Revision 11
EATON Aerospace Group TEB-169B June 2013 1
F2244 Hose Line Flush Stand
F2244-1-1 220V 3PH 60HZF2244-1-2 440V 3PH 60HZ FT1023 Hose Cut Off Saw
FT1023-2-1 220V 1PH 60HZFT1023X 220V 1PH 50HZ S1104 Hose Cut Off Saw
S1104 220V 3PH 60HZ
S1359 Hose Proof Test Stand — Stainless
S1359-1-1 110V 1PH 50/60HZS1359-1-2 220V 1PH 50/60HZ(Hydraulic Oil) S1359-2-1 110V 1PH 50/60HZS1359-2-2 220V 1PH 50/60HZ(De-Ionized Water) S1359-2B 110V 1PH 50/60HZ(City Water) S1359-3-1 110V 1PH 60HZS1359-3-2 220V 1PH 50/60HZ(Phosphate Ester)
S1364 Hot Wire Stripping Tool
S1364 110V 1PH 60HZ
S1347F Crimp Machine
S1347F-1-1 110V 1PH 60HZS1347F-1-2 220V 1PH 60HZS1347F-1-3 110V 1PH 50HZS1347F-1-4 220V 1PH 50HZ S1371 Hose Proof Test Stand
S1371-1-1 110V 1PH 50/60HZS1371-1-2 220V 1PH 50/60HZ(Hydraulic Oil) S1371N 110V 1PH 60HZ(Low Pressure CCR Nozzle)
S1372 Hose Skiving Machine
S1372-2-1 110V 1PH 60HZS1372-2-2 220V 1PH 60HZS1372-2-3 110V 1PH 50HZS1372-2-4 220V 1PH 50HZ S1380 Hose Line Assembly Machine
S1380-1-1 220V 3PH 60HZS1380-1-2 460V 3PH 60HZS1380-1-3 415V 3PH 50HZS1380-1-4 230V 3PH 50HZ S1416B Hose Line Assembly Machine
S1416B1-1 220V 3PH 50HZS1416B1-2 220V 3PH 60HZS1416B1-3 440V 3PH 60HZS1416B1-4 380V 3PH 50HZ
Section I — Hose Assembly Equipment Electrical Options
2 EATON Aerospace Group TEB-169B June 2013
This package contains three options for hose shop equipment. The three options are suggested, not mandatory. Any of the items can be mixed and matched to suit specific needs.
Option 1 - Basic Hose Shop
This option will allow the crimping of medium and high pressure teflon hose assemblies (AE240-3 through 667-16 and AE246-4 through -12). Occasional assemblies of rubber or Teflon reusable hoses would be done by hand.* There is no capability for 400 series integral silicone, or 500 series polyester chafe guard skiving, other than by hand.
*The S1380 assembly machine could be added for higher production of reusable assemblies (-3 through -12).
Option 1 - Basic Hose Shop
Part No. Description Bulletin
S1384FK5A-1-no. Crimp machine kit DS100-23
S1347F-1-no* Crimp machine
S1414 Pre-assembly vise
S1357-5A Tooling kit to crimp straight & elbow fittings for hose styles AE240-3, 666-4 through 667-16; and AE246-4 through -12
S1371-1-No.* Proof test stand with hand pump AEB233A
F1690P-1 thru Proof test adapter, flared -3 through -16 AEB44AF1690P-8
F2373-1 thru Proof test adapter, flareless -3 through -16 F2373-8 (2 each size required) FT1023* Hose cut off saw (through -16 Size) DS100-8
S1051 Hand assembly mandrel kit (flared) DS100-21 (303-3 through -12, 302A16 through 302A20, 306-3 & -4, 306-6 through -10)
FT1081 Teflon hose hand assy kit (-3 through -12) DS100-20 Order FT1090-3-10-4 & FT1090-3-10-5 flare tool separately
F2635 Band clamp tool (vise mount) and adapter for ASB69
F2635-4 AE102 style firesleeve
F2266-2 Hex jaw vise inserts for Wilton vise N/A Approximate package total: Contact Eaton for quote * Need electrical requirements (i.e., voltage, phase, cycles). See section titled
"Hose Assembly Equipment Electrical Options" page 1.
Section I — Hose Assembly Equipment Options
EATON Aerospace Group TEB-169B June 2013 3
Option 1 Hose Shop Equipment Not Available From Eaton
Item vendor
Bench Vise Wilton Corporation 300 S Hicks Road Palatine, Ilinois 60067 Phone: 708-934-6000 Model 400s (4 inch) 6 Inch Calipers N/A ID Tag Etching Machine Monode Marking Products 7748 Tyler Boulevard Mentor, Ohio 44060 Phone: 440-974-6200 Model: MBG (basic marking kit) Timer Vwr Scientific Products Corporation Batavia, Illinois Phone: 1-800-932-5000 Model: VWR brand* 4-channel alarm Timer/stopwatch Cat# 62344-641 ID Tag Spot Welder Miller Electric Manufactoring Co. Dept TR PO Box 1079 Appleton, Wisconsin 54912 Phone: 414-734-9821 Resistance spot welder Model: SSW-1020ATT water cooled 230 Volt, 45 Amp, 60 HZ Inspection balls See list (Section III) Test fluid 1. MIL-H-6083 2. Water soluble oil Typewriter for ID tags: IBM Selectric® ball type, small font, or personal computer with printer (capable of cutting stencils).
Optional monode 6300 stencil cutting system includes 24 pin printer & software
Hose Assembly Lube Aero lube 30 weight oil Sources are not mandatory, but are suggested for availability.
Section I — Hose Assembly Equipment Options
4 EATON Aerospace Group TEB-169B June 2013
Intermediate Hose Shop
Part No. Description Bulletin S1384FK7A-1-no. Crimper kit DS100-23
S1347F-1-no* Crimp machine
S1414 Pre-assembly vise
S1357-7A Tooling kit to crimp straight & elbow fittings for hose styles AE240-3, 666-4 through 667-16; and AE246-4 through -12, utilizing drop-in die cages
S1416K-1-no.* Reusable assembly machine and tooling for TF100-23 straight and elbow fittings -3 through -16
S1410K-1 Tooling kit for 303-3 through-12 and 302A16 through -32 style straight fitting
S1359-2-no.* Proof test stand (stainless) uses water medium AEB214A for testing either red oil (Mil-H-5606) or phosphate ester (Skydrol) lines
F1690p-1 thru Proof test adapter, flared -3 through -16 AEB44AF1690P-8
F2373-1 thru Proof test adapter, flareless -3 through-16 F2373-8 (2 each size required)
S1104* Cut off saw (hose through -48) DS100-24
S1026 Hose measuring gauge attachment
FT1215 Hose reel
F2637 Band clamp air tool (for AE102 firesleeve) ASB69
S1364 Polyester thermal stripping tool kit ASB120A (for AE500 series integral chafe guard)
S1372K* Silicone cover skiving machine kit DS100-16 (for AE400 Series -3 through -16 integral firesleeve)
S1379 Silicone sealant dispenser ASB122 (for AE400 series integral firesleeve)
F2266-2 Hex jaw vise inserts for Wilton vise N/A
Approximate package total: Contact Eaton for quote
* Need electrical requirements (i.e., voltage, phase, cycles). See section titled "Hose Assembly Equipment Electrical Options" page 1.
Section I — Hose Assembly Equipment Options
Option 2 - Intermediate Hose Shop
This option adds machine assembly capability for rubber and teflon reusable hoses through -32 and upgrades the proof test stand to one of production capacity. Equipment is included for skiving 400-series integral silicone, and 500-series polyester hoses. The firesleeve band clamp installation tool is upgraded to the air operated model. Also included is a hose reel and hose channel/measuring gauge.
EATON Aerospace Group TEB-169B June 2013 5
Intermediate Hose Shop
Part No. Description Bulletin S1384FK7A-1-no. Crimper kit DS100-23
S1347F-1-no* Crimp machine
S1414 Pre-assembly vise
S1357-7A Tooling kit to crimp straight & elbow fittings for hose styles AE240-3, 666-4 through 667-16; and AE246-4 through -12, utilizing drop-in die cages
S1416K-1-no.* Reusable assembly machine and tooling for TF100-23 straight and elbow fittings -3 through -16
S1410K-1 Tooling kit for 303-3 through-12 and 302A16 through -32 style straight fitting
S1359-2-no.* Proof test stand (stainless) uses water medium AEB214A for testing either red oil (Mil-H-5606) or phosphate ester (Skydrol) lines
F1690p-1 thru Proof test adapter, flared -3 through -16 AEB44AF1690P-8
F2373-1 thru Proof test adapter, flareless -3 through-16 F2373-8 (2 each size required)
S1104* Cut off saw (hose through -48) DS100-24
S1026 Hose measuring gauge attachment
FT1215 Hose reel
F2637 Band clamp air tool (for AE102 firesleeve) ASB69
S1364 Polyester thermal stripping tool kit ASB120A (for AE500 series integral chafe guard)
S1372K* Silicone cover skiving machine kit DS100-16 (for AE400 Series -3 through -16 integral firesleeve)
S1379 Silicone sealant dispenser ASB122 (for AE400 series integral firesleeve)
F2266-2 Hex jaw vise inserts for Wilton vise N/A
Approximate package total: Contact Eaton for quote
* Need electrical requirements (i.e., voltage, phase, cycles). See section titled "Hose Assembly Equipment Electrical Options" page 1.
Hose Shop Equipment Not Available From Aeroquip
Item Vendor Bench Vise Wilton Corporation 300 S Hicks Road Palatine, Illinois 60067 Phone: 708-934-6000 Model 400s (4 Inch) 6 Inch Calipers N/A ID Tag Etching Machine Monode Marking Products 7748 Tyler Boulevard Mentor, Ohio 44060 Phone: 440-974-6200 Model: MBG (Basic Marking Kit) Timer VWR Scientific Products Corporation Batavia, Illinois Phone: 1-800-932-5000 Model: Vwr Brand* 4-channel alarm timer/stopwatch Cat# 62344-641 ID Tag Spot Welder Miller Electric Manufacturing Co. Dept TR PO Box 1079 Appleton, Wisconsin 54912 Phone: 414-734-9821 Resistance Spot Welder Model: SSW-1020ATT, water cooled, 230 Volt, 45 Amp, 60 Hz Inspection Balls See List (Section III) Typewriter For ID Tags: IBM Selectric® ball type, small font, or personal computer with printer (capable of cutting stencils). Optional Monode 6300 stencil cutting system (includes 24 pin printer & software) Hose Assembly Lube Aero Lube 30 Weight Oil
Sources are not mandatory, but are suggested for availability.
Section I — Hose Assembly Equipment Options
6 EATON Aerospace Group TEB-169B June 2013
Advanced Hose Shop
Part No. Description Bulletin S1384FK7A-1-no. Crimper kit DS100-23
S1347F-1-no* Crimp machine
S1414 Pre-assembly vise
S1357-7A Tooling kit to crimp straight & elbow fittings for hose styles AE240-3, 666-4 through 667-16; and AE246-4 through-12 utilizing drop-in die cages
S1416K-1-no.* Reusable assembly machine and tooling for TF100-23 straight and elbow fittings -3 through -16.
S1410K-1 Tooling kit for 303-3 through-12 and 302A16 through -32 style straight fitting
S1359-2-no.* Proof test stand (stainless) uses water medium AEB214A for testing either red oil (MIL-H-5606) or phosphate ester (Skydrol) lines F1690P1 thru Proof test adapter, flared –3 through -32 AEB44AF1690P-11
F2373-1 thru Proof test adapter, flareless -3 through -16 F2373-8 (2 each size required)
F2304 Flanged fitting PT adapter body AA106
F2304-2-no. Flanged fitting clamp wings and F2304-1-no. Pressure pads for -16 through -32 size (2 each size required)
S1104* Cut off saw (hose through -48) DS100-24
S1026 Hose measuring gauge attachment
FT1215 Hose reel
F2637 Band clamp air tool (for AE102 firesleeve) ASB69
S1364 Polyester thermal stripping tool kit ASB120A (for AE500 series integral chafe guard) S1372K* Silicone cover skiving machine kit DS100-16 (for AE400 series -3 through -16 integral firesleeve)
S1379 Silicone sealant dispenser ASB122 (for AE400 series integral firesleeve)
F2244-1-no.* Hose wash stand AEB35 Approximate package total: Contact Eaton for quote * Need electrical requirements (i.e., voltage, phase, cycles). See section titled
"Hose Assembly Equipment Electrical Options" page 1.
Section I — Hose Assembly Equipment Options
Option 3 - Advanced Hose Shop
This option upgrades to a package which includes flange fitting capability and a hose wash stand.
None of these options provide tooling for the assembly of AE313-16, convoluted, or fabric-braided hoses (e.g. Kevlar). Tooling for these styles would be based upon individual requirements.
EATON Aerospace Group TEB-169B June 2013 7
Hose shop equipment not available from Eaton
Item Vendor 6 Inch Calipers N/A ID Tag Etching Machine Monode Marking Products 7748 Tyler Boulevard Mentor, Ohio 44060 Phone: 440-974-6200 Model: MBG (basic marking kit) Timer VWR Scientific Products Corporation Batavia, Illinois Phone: 1-800-932-5000 Model: VWR brand* 4-channel alarm timer/stopwatch Cat# 62344-641 ID Tag Spot Welder Miller Electric Manufactoring Co. Dept TR PO Box 1079 Appleton, Wisconsin 54912 Phone: 414-734-9821 Resistance Spot Welder Model: SSW-1020ATT water cooled, 230 volt, 45 amp, 60 hz Inspection Balls See list (Section III) Typewriter for ID tags: IBM Selectric® ball type, small font, or personal computer with printer (capable of cutting stencils).
Optional Monode 6300 stencil cutting system (includes 24 pin printer & software) Wash Stand Fuid Mineral spirits, non-aeromatic type Hose Assembly Lube Aero lube 30 weight oil Sources are not mandatory, but are suggested for availability.
Section I — Hose Assembly Equipment Options
8 EATON Aerospace Group TEB-169B June 2013
Section II — Shop Layout
EATON Aerospace Group TEB-169B June 2013 9
Ball Size (Inches) Grade
.031 1/32 200.070 5/64 200.078 5/64 200.094 3/32 200.109 7/64 200.118 1/8 200.120 1/8 200.125 1/8 200.130 9/64 200.141 9/64 200.156 5/32 200.172 11/64 200.188 3/16 200.203 13/64 200.219 7/32 200.234 15/64 200.250 1/4 200.266 17/64 200.281 9/32 200.286 19/64 200.312 5/16 200.328 21/64 200.344 11/32 200.355 3/8 200.375 3/8 200.391 25/64 200.406 13/32 200.438 7/16 200.469 15/32 200.515 33/64 200.532 17/32 200.563 9/16 200.625 5/8 200.750 3/4 200.781 25/32 200.812 13/16 2001.000 1 2001.188 1-3/16 2001.250 1-1/4 2001.625 1-5/8 2001.688 1-11/16 200
Section III — Inspection Balls
10 EATON Aerospace Group TEB-169B June 2013
Bulletin Description AA106 F2304 Pressure Test Adapter
DS100-23 S1347F Crimp Machine and S1414 Pre-Assembly Vise
TF100-23 S1416B Hose Assembly Machine
AEB35 F2244 Hose Wash Stand
AEB44A Proof Test Adapters
DS100-21 S1051 Hand Assembly Tool
DS100-8 FT1023 Cut Off Saw
DS100-20 FT1081 Teflon Hose Assembly Tool Kit
AEB214A S1359 Proof Test Stand
AEB233A S1371 Proof Test Stand
DS100-16 S1372 Silicone Hose Skiving Machine
DS100-15 S1380 Hose Assembly Machine
ASB69 F2635 Band Clamp Tool
ASB120A S1364 Polyester Chafe Guard Stripping Tool
ASB122 S1379 Silicone Dispenser and Instructions for Integral Hose Socket Cap Assembly
DS100-24 S1104 Hose Cut Off Saw
Section IV — Equipment Bulletins
EATON Aerospace Group TEB-169B June 2013 11
Page Date Comment
All 02/01/2010 Updated layout and format2, 4 & 6 06/01/2004 Updated Package List Price9 03/23/2000 Bulletin AEB44A was AEB443, 5 & 7 04/19/2000 Revised suggested source for timer2, 4 & 6 06/01/2004 Updated package list price3, 5 & 7 05/30/2001 Added optional source for ID tags9 05/30/2001 Bulletin AA222 was JA95
Section IV — Notice Of Revision
Copyright © 2013 EatonAll Rights ReservedForm No. TEB-169BJune 2013
Eaton Aerospace Group Fluid & Electrical Distribution Division 300 South East Avenue Jackson, Michigan 49203-1972 Phone: (517) 787 8121 Fax: (517) 789 2947
EatonAerospace Group9650 Jeronimo RoadIrvine, California 92618Phone: (949) 452 9500Fax: (949) 452 9555www.eaton.com/aerospace