+ All Categories
Home > Documents > Hosted VoIP 200 Cartridge Guide

Hosted VoIP 200 Cartridge Guide

Date post: 06-Apr-2018
Category:
Upload: srinivasarao-kandula
View: 220 times
Download: 0 times
Share this document with a friend

of 22

Transcript
  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    1/22

    Network Mediation

    TM

    Version 5.1

    Network Mediation

    Hosted VoIP 2.0.0Cartridge Pack

    User Guide

    First EditionJanuary 2007

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    2/22

    Copyright and Trademark Information

    2007 MetaSolv Software, Inc. All rights reserved. MetaSolv is a trademark registered in the

    United States of America by MetaSolv Software, Inc. All other trademarks contained herein are

    property of their respective owners. Any rights not expressly granted herein are reserved.Information contained herein is subject to change without notice.

    Disclaimer

    All references to future incorporation of new or enhanced product functionality, or to future

    release dates, are estimates only, and MetaSolv may change them at any time, without notice.

    Information in this document is subject to change without notice and does not represent a

    commitment on the part of MetaSolv Software, Inc. All references to new or enhanced product

    functionality, or to future release dates, are estimates only, and MetaSolv may change them at any

    time, without notice.

    The software and/or databases described in this document are furnished under a written licenseagreement or nondisclosure agreement. No part of this document, the software and/or databases

    may be used, reproduced or transmitted in any form or by any means, electronic or mechanical,

    including copying, photocopying, recording, or information storage or retrieval systems, for any

    purpose without the written permission of MetaSolv Software, Inc., except as specifically allowed

    in the written license or nondisclosure agreement. It is against the law to copy the software on anymedium except as specifically allowed in the license or nondisclosure agreement.

    MetaSolv Software, Inc. assumes no responsibility or liability for any errors or inaccuracies that

    may appear in this manual.

    Use of any of this Softwares functionality in a manner inconsistent with your license grant,

    whether or not protected by the Product ID, is a breach of the license agreement between your

    company and MetaSolv. A listing of the software options for which you possess a license may beviewed by navigating to Options>Software Options.

    This Software contains sample network system templates (Templates). MetaSolv does not

    provide, and is not obligated to provide, Standard Maintenance and Support for the Templates or

    any modifications made thereto. The Templates are delivered as is and without warranty of any

    kind.

    Printed in U.S.A.

    MetaSolv Software, Inc.

    5560 Tennyson Parkway

    Plano, TX 75024 U.S.A

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    3/22

    Hosted VoIP Cartridge Pack 1

    ContentsAbout this Guide ............................................................................................................... 2

    Cartridge pack content.................................................................................................... 2

    Cartridge Pack Overview................................................................................................. 3

    Alarms............................................................................................................................. 3

    Architecture..................................................................................................................... 4

    Installing the Cartridge Pack........................................................................................... 5

    Preparing for cartridge pack installation......................................................................... 5

    Installation instructions................................................................................................... 5

    Installing on a Solaris or AIX workstation ................................................................. 5

    Installing on a Windows workstation ......................................................................... 5

    Post-installation instructions........................................................................................... 5

    Testing the cartridge pack installation ............................................................................ 5

    Creating and Configuring the Cartridges ...................................................................... 6

    Hosted VoIP.................................................................................................................... 6

    Configuring the Cartridge Chains ................................................................................ 17

    Uninstalling the Cartridge Pack .................................................................................... 19

    Uninstalling the cartridge pack on a Solaris or AIX workstation................................. 19Uninstalling the cartridge pack on a Windows workstation......................................... 19

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    4/22

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    5/22

    Hosted VoIP Cartridge Pack 3

    Cartridge Pack Overview

    The Hosted VoIP cartridge pack supports the enhancement and distribution of Nortel Networks Communication

    Server 2000 (CS 2000) SN09 AMADNS records.This cartridge pack is comprised of a Service Provider Lookup Enhancement Processor (EP) and a Nortel CS

    2000 AMADNS Distribution Cartridge (DC).

    The Service Provider Lookup EP pulls the lookup file from a remote server at specified frequencies, both of

    which are configurable by the user.

    The Nortel CS 2000 AMADNS DC will output the CS 2000 SN09 AMADNS records.

    AlarmsAll Network Mediation alarms are listed in the alarms.txt file located in the directory. No new

    alarms are introduced in this cartridge pack.

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    6/22

    Hosted VoIP Cartridge Pack 4

    ArchitectureThe following diagram displays the architecture of the solution.

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    7/22

    Hosted VoIP Cartridge Pack 5

    Installing the Cartridge Pack

    Preparing for cartridge pack installationComplete the following pre-installation tasks before installing the cartridge pack:

    1. Ensure Network Mediation 5.1.1 is installed.

    2. Stop the Node Manager, Admin Server and Admin Client.

    3. Install Network Mediation 5.1.1 eFix 1 (or greater), but do not restart the Node Manager, Admin

    Server or Admin Client. You will do this after installing the cartridge pack.

    4. Ensure that you have the latest version of the ama_cdk cartridge pack installed.

    Installation instructionsIn a Solaris or AIX environment, you must install the cartridge pack on every UNIX server running theNode Manager or Admin Server.

    In a Windows environment, you must install the cartridge pack on every workstation where the Node

    Manager, Admin Server, or GUI client are installed.

    Installing on a Solaris or AIX workstationTo install the cartridge pack on a Solaris or AIX workstation:

    Download the .jar file and the .pdfto the /cartridges directory.

    The directory is where you installed Network Mediation.

    Installing on a Windows workstationTo install the cartridge pack on a Windows workstation:

    Download the .jar file and the .pdfto the \cartridges directory.

    The directory is where you installed Network Mediation.

    Post-installation instructionsAfter you install the cartridge pack, restart the Node Manager, Admin Server, and GUI client.

    Testing the cartridge pack installationVerify you have properly installed the cartridge pack by selecting Help > Version Info in the Network

    Mediation GUI. The cartridge pack name and version information should appear, along with information

    about the GUI, Admin Server, and Node Manager.

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    8/22

    Hosted VoIP Cartridge Pack 6

    Creating and Configuring the Cartridges

    The following section explains how to create and configure the Hosted VoIP cartridges.

    Hosted VoIPTo create and configure the Service Provider Lookup EP

    1. In the Administration GUI, clickNew.

    2. Select the Voice over IP (VoIP) button and clickNext.

    3. Select the Enhancement Processor (EP) button and clickNext.

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    9/22

    Hosted VoIP Cartridge Pack 7

    4. In the node configuration window, type a name for the cartridge in the Name field.

    5. In the Rule File drop-down list, accept the default rule file, Nortel CS2000 Service Provider

    Lookup.

    6. On the General tab, refer to the online help for field definitions. The default field settings are shownin the sample below:

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    10/22

    Hosted VoIP Cartridge Pack 8

    7. On the FileEnhancer tab, configure the settings to match the desired mode of file transfer. Here are

    the field definitions:

    a. In the Lookup File field, type in the directory and lookup file name which contains the

    service provider information.

    b. Accept the default Lookup Table name of FTP.

    c. Select Continue on invalid file format if you want to the transfer to continue even if an

    invalid file format is encountered.

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    11/22

    Hosted VoIP Cartridge Pack 9

    8. On the FTP Info tab, use the following guidelines to configure the settings:

    IP Address The IP address of the FTP server from where the lookup file will be pulled.

    User name User name used to access the FTP server

    Password Password used to access the FTP serverVerify Password Verify password used to access the FTP server

    Remote file Name of the lookup file on the FTP server.

    Ftp interval (minutes) Interval in minutes that the FTP server will be accessed to retrieve the latest

    version of the lookup file.

    Get error file Select box if you want to retrieve the error file while pulling the lookup file.

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    12/22

    Hosted VoIP Cartridge Pack

    10

    Error directory Directory where error file resides.

    8. The Destinations tab displays the other cartridges in the system and shows which cartridge the

    current cartridge is connected to, and the type of routing used. You do not need to configure any

    settings on this tab. An example is shown below. See the Network Mediation Online Help for moreinformation on this tab.

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    13/22

    Hosted VoIP Cartridge Pack

    11

    9. Click the Save button.

    To create and configure the Nortel CS2000 AMADNS DC

    1. In the Administration GUI, clickNew.

    2. Select the Voice over IP (VoIP) button and clickNext.3. Select the Distribution Cartridge (DC) button and clickNext.

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    14/22

    Hosted VoIP Cartridge Pack

    12

    4. In the node configuration window, type a name for the cartridge in the Name field.

    5. In the Rule File drop-down list, accept the default rule file, Nortel CS 2000 SN09 AMADNS.

    6. On the General tab, refer to the online help for field definitions. The default field settings are shown

    in the sample below:

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    15/22

    Hosted VoIP Cartridge Pack

    13

    9. On the AMA DNS Output tab, use the following guidelines to configure the settings:

    Output File group box

    Directory Directory where output file will be saved.

    Current File Specifies what is the prefix and suffix of the timestamp (YYMMDDHHmm) filename containing the current CS 2000 AMADNS records.

    Processed File Specifies what is the prefix and suffix of the timestamp (YYMMDDHHmm) filename containing the processed CS 2000 AMADNS records. A new current file is created when it is

    saved and renamed as the processed file.

    File Rotation group box

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    16/22

    Hosted VoIP Cartridge Pack

    14

    Interval Specifies the interval at which the current file is renamed to the processed file.

    Process Daily At Fixed Time (hh:mm) Processes files at the stated interval starting at the

    designated fixed time.

    10. On the FTP tab, use the following guidelines to configure the settings:

    Use FTP Select box if you want to use FTP to push the processed data records to the serviceprovider

    FTP Host IP address of FTP server where files will be pushed.

    FTP Port Communication port of the FTP server

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    17/22

    Hosted VoIP Cartridge Pack

    15

    FTP Login Login name to FTP server

    Remote FTP Password Password for remote FTP server

    Remote Directory Directory on remote FTP server where files will be pushed.

    Transferred file extension File extension of transferred file

    FTP interval Interval at which files are pushed to the FTP server

    Use SFTP Select box to use Secure FTP.

    11. On the Compression tab, select the compression mode for the FTP file transfer from the drop-down

    list: NONE, zip, or gzip.

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    18/22

    Hosted VoIP Cartridge Pack

    16

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    19/22

    Hosted VoIP Cartridge Pack

    17

    Configuring the Cartridge Chains

    To configure the cartridge chain for Nortel CS 2000 AMADNS cartridges, you must create and configure a NortelCS 2000 AMADNS CC, a Service Provider Lookup EP, and a Nortel CS 2000 AMADNS DC. Connect the CC to

    the EP using Multicast routing and connect the EP to the DC using Directed routing.

    Optionally, you may create a Nortel CS 2000 AMADNS reprocessing CC as part of the cartridge chain.

    For information on creating and configuring Nortel CS 2000 AMADNS Collection Cartridges (required and

    optional), see theNortel CS 2000 AMADNS Collection Cartridge Pack User Guide.

    Configuring data routing

    Configure routing to the Service Provider Lookup EP

    1. Click on the Nortel CS 2000 AMADNS CC or the Nortel CS 2000 AMADNS Reprocessing CC.

    2. Click and drag the blue output handle to the Service Provider Lookup EP.

    The Routing Algorithm window appears.

    3. Select Multicast from the drop-down list and clickOK.

    Configure routing to the Nortel CS 2000 AMADNS DC (for specified Service Provider)

    1. Click on the Service Provider Lookup EP.

    2. Click and drag the blue output handle to the desired Nortel CS 2000 AMADNS DC.

    The Routing Algorithm window appears.

    3. Select Directed from the drop-down list and clickOK.

    The Routing Attribute window appears.

    4. Select Service Provider from the drop-down list.

    The Directed Routing Parameters window appears.

    5. In the Boolean Operator drop-down list, select = Equals.

    6. Click the Add button.

    The Enter Explicit Value window appears.

    7. Enter the Service Provider name from which you would like the appropriate data to be sent to this

    instance of the DC.

    ClickOK.

    8. ClickOK to close the Directed Routing Parameters window.

    9. Repeat steps 1 to 8 until all Service Providers have been added to the Directed Routing Parameters

    list.

    Configure routing to the Nortel CS 2000 AMADNS DC (for Service Provider not specified)

    1. Click on the Service Provider Lookup EP.

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    20/22

    Hosted VoIP Cartridge Pack

    18

    2. Click and drag the blue output handle to the Nortel CS 2000 AMADNS DC.

    The Routing Algorithm window appears.

    3. Select Directed from the drop-down list and clickOK.

    The Routing Attribute window appears.

    4. Select Service Provider from the drop-down list.

    The Directed Routing Parameters window appears.

    5. In the Boolean Operator drop-down list, select != Not Equals.

    6. Click the Add button.

    The Enter Explicit Value window appears.

    7. Enter a Service Provider name associated with a Nortel CS 2000 AMADNS DC instance defined in

    the previous configuration procedure.

    ClickOK.

    8. Repeat steps 6 and 7 until all Service Providers, defined in other DC instances, have been added tothe Directed Routing Parameters list.

    9. ClickOK to close the Directed Routing Parameters window.

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    21/22

    Hosted VoIP Cartridge Pack

    19

    Uninstalling the Cartridge Pack

    You can uninstall the cartridge pack by performing the following procedure.

    Uninstalling the cartridge pack on a Solaris or AIXworkstationPerform the following steps to remove the cartridge pack from a Solaris or AIX workstation:

    1. Navigate to the /cartridges directory.

    2. Remove the .jar file and the .pdffile with the following command:

    rm .jar .pdf

    Uninstalling the cartridge pack on a Windows workstationPerform the following steps to remove the cartridge pack from a Windows workstation:1. Navigate to the \cartridges directory.

    2. Right-click on the .jar file and select Delete.

    3. Right-click on the .pdffile and select Delete.

  • 8/3/2019 Hosted VoIP 200 Cartridge Guide

    22/22

    MetaSolv Software, Inc.

    Headquarters:5560 Tennyson Parkway

    Plano, TX 75024

    972.403.8300 (Voice)972.403.8333 (Fax)

    800.747.0791 (Toll Free)

    World Wide Webwww.metasolv.com

    2006 MetaSolv Software, Inc. All rights reserved. MetaSolv is a trademark registered in the United States of

    America by MetaSolv Software, Inc. All other trademarks contained herein are property of their respective owners.Any rights not expressly granted herein are reserved. Information contained herein is subject to change without notice.


Recommended