Spring/Summer 2016Issue 39

Valid until 30th September 2016

SUPPORTING YOUR LOCAL DISTRIBUTOR

Hotlist

Portable Surface Roughness TesterSee back page for details.

Digital Absolute MeasuringSee page 3 for details.

Steel Pin Gauge SetsSee page 2 for details.

See Bowers Group

at MACH 2016,

Hall 5, Stand 5928

To order your copy of the NEW Bowers Product

Catalogue 2016/17 email new@bowersgroup.co.uk today

NEWNEW

10%SAVING

10%SAVING

118868_MW_Hotlist_March_2016_Issue39.indd 1 25/02/2016 08:14

WORKSHOP TOOLS

See back page for Your Distributor Details2

Steel Pin Gauge Sets

Code No DescriptionList Price

MW725-01 Steel Pin Gauge Set 51pce 0.50-1.00x.01mm +/- 0.002mm C/W Handle £221.00 TMW725-02 Steel Pin Gauge Set 100pce 1.01-2.00x.01mm +/- 0.002mm C/W Handle £246.00 TMW725-03 Steel Pin Gauge Set 100pce 2.01-3.00x.01mm +/- 0.002mm C/W Handle £246.00 TMW725-04 Steel Pin Gauge Set 100pce 3.01-4.00x.01mm +/- 0.002mm C/W Handle £246.00 TMW725-05 Steel Pin Gauge Set 100pce 4.01-5.00x.01mm +/- 0.002mm C/W Handle £246.00 TMW725-06 Steel Pin Gauge Set 100pce 5.01-6.00x.01mm +/- 0.002mm C/W Handle £285.00 TMW725-07 Steel Pin Gauge Set 100pce 6.01-7.00x.01mm +/- 0.002mm C/W Handle £285.00 TMW725-08 Steel Pin Gauge Set 100pce 7.01-8.00x.01mm +/- 0.002mm C/W Handle £285.00 TMW725-09 Steel Pin Gauge Set 100pce 8.01-9.00x.01mm +/- 0.002mm C/W Handle £285.00 TMW725-10 Steel Pin Gauge Set 100pce 9.01-10.00x.01mm +/- 0.002mm C/W Handle £285.00 T

Steel Pin Gauge Sets

�� Standard: Factory Standard

�� Boxed sets complete with handle

�� Each pin is laser engraved with its size above 1.5mm

�� Each pin is stored in its own tube, marked with the pin size

�� Pin length 50mm

�� Supplied with a certificate of conformity

�� Fully hardened to 60/62 HRC

��Manufacturing tolerance +/- .002mm

NEW

118868_MW_Hotlist_March_2016_Issue39.indd 2 25/02/2016 08:14

DIGITAL ABSOLUTE MEASURING

Visit: www.moore-and-wright.co.uk 3

Digital Absolute Measuring

Code No DescriptionRange (mm)

Range (inch)

Resolution (mm)

Resolution (inch)

Accuracy (mm)

Accuracy (inch)

List Price

Hotlist Price

MW110-15DABS Digital Caliper 0-150 0-6 0.01 0.0005 +/-.020 +/-.001 £66.50 £60.00 TMW110-20DABS Digital Caliper 0-200 0-8 0.01 0.0005 +/-.030 +/-.0015 £97.00 £87.50 TMW110-30DABS Digital Caliper 0-300 0-12 0.01 0.0005 +/-.030 +/-.0015 £138.00 £124.50 TMW202-01DABS Digital Snap Micrometer 0-25 0-1 0.001 0.00005 0.003 0.00015 £168.50 £152.00 TMW202-02DABS Digital Snap Micrometer 25-50 1-2 0.001 0.00005 0.003 0.00015 £189.00 £170.50 TMW202-03DABS Digital Snap Micrometer 50-75 2-3 0.001 0.00005 0.004 0.0002 £205.50 £185.00 TMW202-04DABS Digital Snap Micrometer 75-100 3-4 0.001 0.00005 0.004 0.0002 £224.50 £202.50 TMW430-01DABS Digital Indicator 0-12.5 0-0.5 0.001 0.00005 0.004 0.0002 £168.50 £152.00 TMW430-02DABS Digital Indicator 0-25.4 0-1.0 0.001 0.00005 0.005 0.00025 £194.00 £175.00 TMW430-03DABS Digital Indicator 0-50.8 0-2.0 0.001 0.00005 0.006 0.0003 £296.00 £266.50 T

Data Cable

Code No DescriptionList Price

MW-Y100/700USB Data Cable-USB to suit all DABS products £82.00 T

Digital Absolute Measuring

NEWMW110-15DABS

MW202-01DABS

MW430-01DABS

Caliper

�� Absolute Measuring System

�� RS232 Digimatic output

�� CR2032 Battery

�� 4-way measurement

�� Functions: mm/Inch conversion, on/off, data-output

�� Thumb wheel for fine adjustment

Snap Micrometer

�� Absolute Measuring System

�� RS232 Digimatic output

�� CR2032 battery

�� Non rotating spindle

�� Constant measuring force

�� Quick & repeatable measurement

Indicator

�� Absolute Measuring System

�� RS232 Digimatic output

�� CR2032 battery

�� 8mm/H7 clamping diameter

�� Supplied with lugback and flat back

�� Functions: tolerances, mm/inch conversion, Preset, data-output

�� IP54 rated

Complies with: DIN 862

10%SAVING

118868_MW_Hotlist_March_2016_Issue39.indd 3 25/02/2016 08:14

BORE GAUGES

See back page for Your Distributor Details4

Cylinder Bore Gauge Sets 316 Series

��With interchangeable contact points

�� Set of carbide tipped contact points included

�� Unique self centring device

�� Supplied with dial indicator, resolution 0.01mm

�� Packed as set with all necessary accessories to measure the complete range as shown

Digital Bore Gauge Sets

�� Supplied with digital indicator with bar graph and numerical display

Cylinder Bore Gauges

Code NoRange (mm)

Resolution (mm)

List Price

Hotlist Price

MW316-03 18-35 0.01 £71.50 £61.00 TMW316-04 35-50 0.01 £71.50 £61.00 TMW316-05 50-160 0.01 £77.50 £66.00 T

Cylinder Bore Gauge Setting Master Kit

Code No DescriptionList Price

Hotlist Price

MW720-01 Bore Gauge Setting Master Kit £215.50 £194.00 T

Digital Bore Gauge Set

Code NoRange (mm)

Resolution (mm)

Resolution (inch)

Measuring Depth (mm)

Measuring Depth (inch)

List Price

Hotlist Price

MW316-12D 35-160 0.001 0.0005 200 8 £439.50 £374.00 T

Cylinder Bore Gauge Setting Master Kit

15%SAVING

10%SAVING

118868_MW_Hotlist_March_2016_Issue39.indd 4 25/02/2016 08:14

BORE GAUGES

Visit: www.moore-and-wright.co.uk 5

10%SAVING

�� Range 2-300mm (0.080"-12")

�� Graduation: 0.005mm

�� Tungsten carbide measuring faces on all 3-point heads from 12.5mm

�� Blind bore measurement from 2mm–6mm and above 12.5mm (0.500")

�� Extensions available above 6mm for deep hole measurement

�� Ratchet stop to ensure consistent measurement

�� Setting rings included with individual instruments and sets

�� UKAS certificate supplied as standard with all setting rings

�� UKAS certificate supplied as standard with all XT mechanical micrometers

�� Serial number on all gauges

�� Bore gauges manufactured according to DIN 863, part 4

�� Supplied in fitted case

�� Configured sets available

��More compact mechanical controller

�� Lighter and ergonomically designed

�� Improved functionality

�� Vernier scale added to improve resolution from 5µ to 2µ

Mechanical Bore Gauge - XT Analogue

Code NoRange (mm)

Setting Ring (mm)

ListPrice

HotlistPrice Code No

Range (inch)

Setting Ring (inch)

ListPrice

HotlistPrice

XT M

icro

MXTA6M 6-8 8.00 £223.00 £201.00 A XTA6i 1/4-5/16 0.3125 £223.00 £201.00 AMXTA8M 8-10 8.00 £232.00 £209.00 A XTA8i 5/16-3/8 0.3125 £232.00 £209.00 AMXTA10M 10-12.5 12.50 £232.00 £209.00 A XTA10i 3/8-1/2 0.500 £232.00 £209.00 AMXTA12M 12.5-16 12.50 £232.00 £209.00 A XTA12i 1/2-5/8 0.500 £232.00 £209.00 AMXTA16M 16-20 20.00 £236.50 £213.00 A XTA16i 5/8-3/4 0.750 £236.50 £213.00 AXTA20M 20-25 20.00 £257.50 £232.00 A XTA20i 3/4-1 0.750 £257.50 £232.00 AXTA25M 25-35 35.00 £370.50 £333.50 A XTA25i 1-1 3/8 1.375 £370.50 £333.50 AXTA35M 35-50 35.00 £377.50 £340.00 A XTA35i 1 3/8-2 1.375 £377.50 £340.00 AXTA50M 50-65 65.00 £449.50 £405.00 A XTA50i 2-2 5/8 2.625 £449.50 £405.00 AXTA65M 65-80 65.00 £449.50 £405.00 A XTA65i 2 5/8-3 1/4 2.625 £449.50 £405.00 AXTA80M 80-100 80.00 £569.50 £513.00 A XTA80i 3 1/4-4 3.250 £569.50 £513.00 A

Sets: Supplied with individual instrument, setting rings and UKAS

Code NoRange (mm)

Measuring Heads

Setting Rings

ListPrice

HotlistPrice Code No

Range (inch)

Measuring Heads

Setting Rings

ListPrice

HotlistPrice

SMXTA4M 10-20 3 2 £626.50 £564.00 A SXTA4i 3/8-3/4 3 2 £626.50 £564.00 ASXTA5M 20-50 3 2 £985.00 £886.50 A SXTA5i 3/4-2 3 2 £985.00 £886.50 ASXTA6M 50-100 3 2 £1,338.50 £1,205.00 A SXTA6i 2-4 3 2 £1,338.50 £1,205.00 A

Mechanical Bore Gauge - XT Analogue

MXTA10M – NEW XTA Micro

NEW

NEW XTA Micro Vernier scale added to improve resolution from 5µ to 2µ

Prices inclusive of setting ring and

UKASCalibration Certificate

118868_MW_Hotlist_March_2016_Issue39.indd 5 25/02/2016 08:14

TRADITIONAL MICROMETERS

See back page for Your Distributor Details6

Moore & Wright Traditional External Micrometer, 1966 Series

Moore & Wright Traditional External Micrometer, 1961 and 1965 Series with Carbide Anvils

All models feature

�� Tungsten carbide measuring faces

�� 6.5mm spindle diameter

�� ’Speeder’ type ratchet

�� Locking lever

�� Choice of standard or vernier type sleeve

�� Supplied in plastic pocket case

�� Adjusting key

1961 Series features

�� Capacity of 0-25mm / 0-1"

�� Pearl chrome plated frame with insulation pads

1965 Series features

�� Capacity from 0-25mm / 0-1"

�� Blue textured frame finish

�� Tapered bow frame

�� Tungsten carbide measuring faces

�� 6.5mm spindle diameter

�� Blue textured frame finish

�� ‘Speeder’ type ratchet

�� Locking lever

�� Adjusting key

�� Supplied in case

�� Choice of standard or vernier type sleeve

�� Tapered bow frame

Complies with: BS870, DIN 863/1, ISO3611

1961MB

1965M

25%SAVING

VISIT WWW.BOWERSGROUP.CO.UK TO VIEW OUR FULL RANGE

OF MICROMETERS

Mechanical External Micrometer - Imperial: 0-1" and Metric 0-25mm

Range (mm)

Range (inch)

0.001" 0.01mm ListPrice

HotlistPrice

0.0001" 0.002mm ListPrice

HotlistPriceReading Reading

0-25 0-1 1961 1961M £56.00 £42.00 T 1961B 1961MB £63.00 £47.50 T0-25 0-1 1965 1965M £39.30 £29.50 T 1965B 1965MB £44.90 £34.00 T

Mechanical External Micrometer - Imperial: 1-6"

Range (inch) 0.001"

ListPrice

HotlistPrice 0.0001"

ListPrice

HotlistPrice

1-2 19662 £56.00 £42.00 T 1966B2 £63.00 £47.50 T2-3 19663 £73.50 £55.50 T 1966B3 £80.00 £60.00 T3-4 19664 £82.50 £62.00 T 1966B4 £88.50 £66.50 T4-5 19665 £90.00 £67.50 T 1966B5 £95.00 £71.50 T5-6 19666 £93.00 £70.00 T 1966B6 £97.00 £73.00 T

Mechanical External Micrometer - Metric: 25-150mm

Range (mm)

0.01mm ListPrice

HotlistPrice

0.002mm ListPrice

HotlistPrice

25-50 1966M50 £56.00 £42.00 T 1966MB50 £63.00 £47.50 T50-75 1966M75 £73.50 £55.50 T 1966MB75 £80.00 £60.00 T75-100 1966M100 £82.50 £62.00 T 1966MB100 £88.50 £66.50 T100-125 1966M125 £90.00 £67.50 T 1966MB125 £95.00 £71.50 T125-150 1966M150 £92.00 £69.00 T 1966MB150 £97.00 £73.00 T

25%SAVING

118868_MW_Hotlist_March_2016_Issue39.indd 6 25/02/2016 08:14

DIGITAL MICROMETERS

Visit: www.moore-and-wright.co.uk 7

10%SAVING

10%SAVING

10%SAVING

Value Line Digital External Micrometer 200 Series

Digital External Micrometer 201 Series

�� Large LCD display

�� Tapered for easier access to difficult areas

�� Hammertone finished frame with high quality insulated grip

�� Tungsten carbide measuring faces and constant force ratchet on thimble

�� Functions: mm/inch conversion, ABS/INC, zero setting

�� Packed in plastic box with standard (over 25mm)

�� Protected to IP54 specifications

�� Rugged steel design

�� Large LCD display

�� Absolute and Incremental modes

�� Carbide measuring faces

�� Ball attachment included

�� Packed in plastic box with standard (over 25mm)

Complies with: DIN 863

Complies with: DIN 863

Value Line Digital External Micrometer

Code NoRange (mm)

Range (inch)

Resolution (mm)

Resolution (inch)

List Price

HotlistPrice

MW200-01DBL 0-25 0-1 0.001 0.00005 £65.50 £59.00 TMW200-02DBL 25-50 1-2 0.001 0.00005 £79.50 £72.00 TMW200-03DBL 50-75 2-3 0.001 0.00005 £93.50 £84.50 TMW200-04DBL 75-100 3-4 0.001 0.00005 £115.50 £104.00 T

Digital External Micrometer

Code NoRange (mm)

Range (inch)

Resolution (mm)

Resolution (inch)

List Price

HotlistPrice

MW201-01DAB 0-25 0-1 0.001 0.00005 £84.50 £76.50 TMW201-02DAB 25-50 1-2 0.001 0.00005 £104.00 £94.00 TMW201-03DAB 50-75 2-3 0.001 0.00005 £113.50 £102.50 TMW201-04DAB 75-100 3-4 0.001 0.00005 £140.00 £126.00 T

Snapcal 461 Series

�� Spring-loaded travel

�� Inch/mm conversion

��Wide faced flat jaw for easy positioning

�� Hardened stainless steel construction

�� Supplied in rugged holster

Snapcal

Code NoRange (mm)

Range (inch)

Resolution (mm)

Resolution (inch)

Accuracy (mm)

Accuracy (inch)

List Price

HotlistPrice

MW461-01D 0-30 0-1.25 0.01 0.0005 +/-0.02 0.001 £71.50 £64.50 T

118868_MW_Hotlist_March_2016_Issue39.indd 7 25/02/2016 08:14

CALIPERS

See back page for Your Distributor Details8

Internal/External Digital Calipers

External Digital Caliper Specification

Code NoRange (mm)

Range (inch)

Dimn – A

Dimn – B

Dimn – C

Contact Radius

List Price

HotlistPrice

MW442-01DC 0-10 0.2-0.4 40.0 3.0 8.0 0.5mm £201.50 £171.50 TMW442-02DC 10-20 0.4-0.8 40.0 3.0 8.0 0.5mm £201.50 £171.50 TMW442-03DC 20-30 0.8-1.2 40.0 3.0 8.0 0.5mm £201.50 £171.50 TMW442-04DC 30-40 1.2-1.6 40.0 3.0 8.0 0.5mm £201.50 £171.50 TMW442-05DC 40-50 1.6-2.0 40.0 3.0 8.0 0.5mm £201.50 £171.50 T

Internal Digital Caliper Specification

Code NoRange (mm)

Range (inch)

Dimn – A

Dimn – B

Dimn – C

Contact Radius

List Price

HotlistPrice

MW432-01DC 5-15 0.2-0.6 20.0 1.0 1.5 0.3mm £201.50 £171.50 TMW432-02DC 10-20 0.4-0.8 25.0 1.5 3.0 0.3mm £201.50 £171.50 TMW432-03DC 20-30 0.8-1.2 30.0 2.0 6.5 0.5mm £201.50 £171.50 TMW432-04DC 30-40 1.2-1.6 30.0 2.5 9.0 0.5mm £201.50 £171.50 TMW432-05DC 40-50 1.6-2.0 30.0 2.5 9.0 0.5mm £201.50 £171.50 T

Value Line Digital Caliper 110 Series

�� ABS / INC measurement

�� Large LCD display

�� On/off switch

�� Zero point at any position

�� Displays values in mm and inch

�� All metal parts made of hardened stainless steel

�� CR2032 battery

Value Line Digital Caliper

Code NoRange (mm)

Range (inch)

Resolution (mm)

Resolution (inch) Jaws

List Price

MW110-15DBL 0-150 0-6 0.01 0.0005 40mm £40.30 TMW110-20DBL 0-200 0-8 0.01 0.0005 50mm £69.50 TMW110-30DBL 0-300 0-12 0.01 0.0005 60mm £113.50 T

* Buy one and get the same size caliper FREE!

Buy one get one FREE!*

OFFER EXTENDED

Complies with: DIN 862

MW432-01DC MW442-02DC15%SAVING

�� Large LCD display

�� 0.005mm or 0.0002" resolution

�� Preset capability

�� Direct Inch/Metric conversion

�� Absolute/Incremental measurements

118868_MW_Hotlist_March_2016_Issue39.indd 8 25/02/2016 08:14

WORKSHOP TOOLS

Visit: www.moore-and-wright.co.uk 9

Moore & Wright Engineers’ Straight Edges

Standard features include

�� Manufactured from high quality hardened steel

�� Available with either square or one 30º bevelled edge

�� Finish ground on both sides and edges

�� Clearly marked supporting points on 900mm size

Light Section Straight Edges

��Manufactured to BS5204 Grade B

�� Suitable for general workshop use

Heavy Section features

��Manufactured to BS5204 Grade A

�� Suitable for precision, inspection and workshop use

Metric / Imperial Light Section (Grade B) Straight Edges

Length (mm)

Length (inch)

Width (mm)

Width (inch) Thickness Code No Description

List Price

HotlistPrice Code No Description

List Price

HotlistPrice

305 12 32 1 1/4 4.76mm / 3/16" 31012 Square Edge £135.50 £102.00 F 310B12 Bevel Edge £145.00 £109.00 F610 24 41 1 5/8 6.35mm / 1/4" 31024 Square Edge £256.50 £192.50 F 310B24 Bevel Edge £275.00 £206.50 F914 36 51 2 7.94mm / 5/16" 31036 Square Edge £424.00 £318.00 F 310B36 Bevel Edge £451.50 £339.00 F

Metric Heavy Section (Grade A) Straight Edges

Length (mm)

Length (inch)

Width (mm)

Width (inch) Thickness Code No Description

List Price

HotlistPrice Code No Description

List Price

HotlistPrice

305 12 41 1 5/8 6.35mm / 1/4" 31212 Square Edge £175.00 £131.50 F 312B12 Bevel Edge £193.00 £145.00 F610 24 51 2 7.94mm / 5/16" 31224 Square Edge £307.50 £231.00 F 312B24 Bevel Edge £328.50 £246.50 F914 36 64 2 1/2 9.53mm / 3/8" 31236 Square Edge £467.00 £350.50 F 312B36 Bevel Edge £490.50 £368.00 F

Tolerances Tables for Straight Edges

GRADE B - 310 SERIES

Nominal Length

Straightness of Working Faces

Parallelism of Working Faces

Combined Tolerance of flatness & Parallelism of Side Faces

12" 0.00039" 0.00039" 0.00276"24" 0.00047" 0.00047" 0.00315"36" 0.00055" 0.00055" 0.00354"

Tolerances Tables for Straight Edges

GRADE A - 312 SERIES

Nominal Length

Straightness of Working Faces

Parallelism of Working Faces

Combined Tolerance of flatness & Parallelism of Side Faces

12" 0.00020" 0.00020" 0.00197"12" 0.00020" 0.00020" 0.00197"36" 0.00028" 0.00028" 0.00236"

31012

31036

25%SAVING

118868_MW_Hotlist_March_2016_Issue39.indd 9 25/02/2016 08:14

WORKSHOP TOOLS

See back page for Your Distributor Details10

Carbide Tipped Scriber

Sliding ‘T’ Squares

�� Pocket clip

�� Pearl-chrome finish

�� Robust design

��Working surfaces of the stock are ground

�� The blade is hardened, tempered and has a satin chrome finish

Metric Sliding ‘T’ Squares

Code NoLength (mm) Graduation

Stock Length (mm)

List Price

HotlistPrice

DS71041 100 1mm, 0.5m 62 £32.20 £27.50 TDS71051 150 1mm, 0.5m 62 £38.30 £33.00 T

Carbide Tipped Scriber

Code No Description NoteList Price

HotlistPrice

SCT-001XR Retail Pack, replaceable carbide tipped scriber Supplied with spare scriber £19.20 £16.50 FSCT-002R Retail Pack, fixed carbide tipped scriber £12.40 £11.00 F

SCT-001XR

SCT-002R

15%SAVING

15%SAVING

118868_MW_Hotlist_March_2016_Issue39.indd 10 25/02/2016 08:14

LEVELLING

Visit: www.moore-and-wright.co.uk 11

ELS

ELM

Traditional Mini Level

Digital Mini-Mag Level 570 Series

�� Ultra compact dimensions and a single vial

��Machined from a solid block of carbon steel

�� Supplied on retail card

��Measuring range 360º (4 x 90º)

�� Embedded magnets on two sides

�� Resolution 0.05º

Digital Mini-Mag Level

Code No DescriptionList Price

HotlistPrice

MW570-01 Mini-Mag Level £59.00 £44.50 T

Traditional Engineers’ Level

��Main vial sensitivity of 1 minute

�� Each level is fitted with a main, cross and plumb vial

��Main vial protected by rotating shroud

�� Vial solution maintains colour and fluidity under all workshop conditions

�� Precision ground cast base with vee groove for location on cylindrical work

Metric / Imperial Mini Levels

Code NoLength (mm)

Length (inch)

Width (mm)

Width (inch)

Height (mm)

Height (mm)

Accuracy (inch)

List Price

HotlistPrice

ELT-001XR 51 2.0 19 0.75 19 0.75 ± 1° / 0.0035" per foot £14.40 £12.50 F

Metric / Imperial Engineers’ Level

Code NoLength (mm)

Length (inch)

Width (mm)

Width (inch)

Height (mm)

Height (inch)

Resolution (mm)

Resolution (inch)

List Price

HotlistPrice

ELS 165 6.5 34 1.34 46 2.28 0.3mm per metre 0.0035" per foot £126.00 £113.50 VELM 310 12 36 1.42 58 1.81 0.3mm per metre 0.0035" per foot £185.50 £167.00 V

�� Accuracy +/- 0.2º

�� Standard 9V battery

�� Dimensions: L60mm x H60mm x W35mm

15%SAVING

25%SAVING

10%SAVING

118868_MW_Hotlist_March_2016_Issue39.indd 11 25/02/2016 08:14

DISTRIBUTED BY:

Pricing: Whilst every effort is made to ensure accuracy and prices, the prices should be used as a guide only. We recommend you contact the sales office for exact pricing information.

CAT: LIT1039G

MOORE & WRIGHT

Tel: 08708 50 90 50sales@moore-and-wright.co.ukwww.moore-and-wright.co.uk

Visit: www.moore-and-wright.co.uk

SURFACE ROUGHNESS

Portable MTR110 Surface Finish Tester

�� Back-light LCD

�� Dynamic Test Display: progress of cut-off length during testing

�� Li-ion rechargeable batteries

�� Protection slide on pick-up

�� Auto-off after 90 seconds

�� Pocket-size and economically priced

�� Both Ra and Rz parameters in one instrument

�� Features external calibration specimen

Rz and Ra:

�� Rz is the mean of all of the maximum peak to valley heights, from each sampling length, within the assessment length.

�� Ra is the universally recognised and most used international parameter of roughness. It is the arithmetic mean of the absolute departures of the roughness profile from the mean line.

Portable Surface Roughness Tester

Code No DescriptionList Price

Hotlist Price

MTR-110UK Surface Roughness Tester complete with charger £958.00 £862.50 Q

10%SAVING

118868_MW_Hotlist_March_2016_Issue39.indd 12 25/02/2016 08:14