Date post: | 17-Jul-2015 |
Category: |
Technology |
Upload: | expert-computing |
View: | 246 times |
Download: | 1 times |
How to
replace the
battery in
MacBook Pro
Time you require :
Within 10 you have
your replaced
battery up.! Stay
tune
Level of Difficulty:
Moderate :Easy To
Understand
Only two Tool you should
require
1. Small Screwdriver
2. Tri lobe Screwdriver
Warning
1. Discharge static electricity before beginning
2. work on static free Surface
Part 1
Remove original battery from Laptop
Step 1 — Lower Case:
1. Remove the ten screws from the lowercase of the
laptop
2. As show in image use convenient screwdriver to
bring out screws
Step 2 :
Use your fingers to pry the lower case away from the body
of the MacBook near the vent.
Step 3:
Remove the lower case.
Step 4 - Remove Battery Connection:
Use the edge of a spudger to pry the Battery connector
upwards from its socket on the logic board.
It is useful to pry upward on both short sides of the
connector to "walk" it out of its socket. Be careful with the
corners of the connectors, they can be easily broken off.
Bend the battery cable slightly away from its socket on
the logic board so it does not accidentally connect itself
while you work.
Step 4:
Remove two screws of the battery to make battery
free from Surface:
Step 5 – Remove screw of the battery:
1. Carefully peel the battery warning label off the upper case between the battery and the optical drive.
2. But do not remove the label from the battery.
Step 6 – Remove The warning label of battery:
Use the attached plastic pull tab to remove the battery
from the Upper case.
Step 7 – Remove battery from laptop
To reassemble your
device, follow these
instructions in reverse
order.
108 Deepdale Road
Preston, Lancashire, PR1
5AR, united kingdom