+ All Categories
Home > Documents > How to choose the right mattress? - LINETmedicalmattress.linet.com/downloads/brochure-en.pdf ·...

How to choose the right mattress? - LINETmedicalmattress.linet.com/downloads/brochure-en.pdf ·...

Date post: 01-Sep-2018
Category:
Upload: phungnhan
View: 216 times
Download: 0 times
Share this document with a friend
2
Standard Hospital Ward Intensive Care Unit Critical Care Unit Nursing/Home Care Best solution for special purposes: Mattresses — what to be aware of? How to choose the right mattress? Bottoming-out — high risk of pressure ulcer Mattress deflation — compressor not connected correctly, correct risk assessment of the patient Incorrectly selected pressure Lifting the back section without pressure adjustment Height between the mattress and the side rail to comply with the norm. Regular mattress cleaning Chose mattress for prevention or treatment of pressure ulcers Burn patients — Low air-loss system – ProphyCair Patients in prone position — Virtuoso (with prone-zoner option) Bariatric patients — exceptional weight limit — ProphyCair Besides the high-quality of mattress the patient should get always the solution which always conform to patient´s needs. Also, the caregiver in general should be aware of situations which brings the patient in potential risks. Linet´s mattresses includes features which help to eliminate this risk. Passive mattresses Foam mattresses constructed from Polyurethane (PU) foam or PU and viscoelastic foam Diverse sections on both upper and lower layer Single foam and foam combinations Large weight range from paediatric to bariatric Wide range of sizes to meet needs of all bed-frames Reactive mattresses (Hybrid Foam) Constructed of air foam cells with a top layer of viscoelastic foam. Increased patient comfort and more effective prevention Can be used in combination with a compressor to give alternating pressure and MCM Management of moisture between skin and mattress (when compressor attached MCM) Active mattresses Includes mattresses with cells, the mattress is constantly connected to the compressor Different cell technologies Different types of therapies Constant low pressure Therapy based on distributing pressure across the patient's entire body Appropriate low pressure is set and maintained Moder Low-air-loss Constant air loss — microclimate management — dissipation of moisture between skin and mattress At 100% relative humidity, the skin is 25 times weaker than at 50% humidity Alternating therapies A critical aspect of therapy is the reduction of pressure on the patient's body to allow oxygen and nutrients to circulate freely and accelerate healing Zero pressure is achieved by alternating pressure within the 3-cell system of the mattress (3-cell and 2-cell system) ALTERNATION The alternation regularly release the pressure under a patient by changing the pressure in different areas of mattress. This brings relaxation for skin in areas where is mattress deflated. Moreover, with 3-cell technology the alternation provides zero pressure, which fully eliminates the action of pressure on high-risk areas of the body. CONSTANT LOW PRESSURE The system automatically maintains the selected pressure value regardless of changes in the patient's weight distribution or position. This constantly optimizes the pressure acting on the skin. PASSIVE SYSTEM A comprehensive range of static mattresses from single block Polyurethane foam to Viscoelastic 7 zoned mattresses, the CliniCare 30 having CLIMA technology to help manage the temperature at the patient skin mattress interface. Virtuoso (ALTERNATING+CLP SYSTEM) Highest clinical effect Enhanced care for proned patients Battery Back-up 24 hour care | Easy hygiene Symbioso 200 (CLP SYSTEM) Semi-automatic system Easily controllable from bed display Improved prevention with MCM | Easy hygiene Primacare (PASSIVE MATTRESS) Weight limit 200 kg Profiling of foam on top EffectaCare (PASSIVE MATTRESS) Combination of standard PU foam with 7-zoned visco layer on top Sideformers Weight limit 230 kg Precioso (ALTERNATING+CLP SYSTEM) Highest clinical effect Replacement & overlay version 24 hour care Easy hygiene ProphyCair (CLP LOW AIR-LOSS SYSTEM) Improved prevention with low air-loss feature Exceptional weight capacity Optional dimensions to fits bariatric beds CliniCare 100 HF (REACTIVE SYSTEM) High comfort for patients Provides preventive effect without pump Provides enhanced clinical effect in connection with pump (MCM, APT) Air2Care (ALTERNATING AND CLP SYSTEM) Effective & comfortable Replacement & overlay version 24 hour care Easy hygiene Complete immobility, unconsciousness Partially mobile patients at high risk of decubitus Partially mobile patients after surgery Mobile patients at risk of decubitus Mobile patients at low risk of decubitus I+II III IV Risk of pressure ulcer development EffectaCare PrimaCare CliniCare ProphyCair Burn patients Low air-loss system Symbioso 200 Air2Care CliniCare 100 HF (reactive system) Grade of existing pressure ulcer Virtuoso Patients in prone position Precioso
Transcript
Page 1: How to choose the right mattress? - LINETmedicalmattress.linet.com/downloads/brochure-en.pdf · Standard Critical Care Unit Intensive Care Unit Hospital Ward Nursing/Home Care Best

Standard Hospital WardIntensive Care UnitCritical Care Unit

Nursing/HomeCare

Best solution for specialpurposes:

Mattresses — what to be aware of?

How to choose the right mattress?

Bottoming-out — high risk of pressure ulcerMattress deflation — compressor not connected correctly, correct risk assessment of the patientIncorrectly selected pressure Lifting the back section without pressure adjustment

Height between the mattress and the side rail to comply with the norm.Regular mattress cleaningChose mattress for prevention or treatment of pressure ulcers

Burn patients — Low air-loss system – ProphyCair

Patients in prone position — Virtuoso (with prone-zoner option)

Bariatric patients — exceptional weight limit — ProphyCair

Besides the high-quality of mattress the patient should get always the solution which always conform to patient́ s needs. Also, the caregiver in general should be aware of situations which brings the patient in potential risks. Linet́ s mattresses includes features which help to eliminate this risk.

Passive mattressesFoam mattresses constructed from Polyurethane (PU) foam or PU and viscoelastic foamDiverse sections on both upper and lower layerSingle foam and foam combinationsLarge weight range from paediatric to bariatricWide range of sizes to meet needs of all bed-frames

Reactive mattresses (Hybrid Foam)Constructed of air foam cells with a top layer of viscoelastic foam.Increased patient comfort and more effective preventionCan be used in combination with a compressor to give alternating pressure and MCMManagement of moisture between skin and mattress (when compressor attached MCM)

Active mattressesIncludes mattresses with cells, the mattress is constantly connected to the compressorDifferent cell technologies Different types of therapiesConstant low pressureTherapy based on distributing pressure across the patient's entire bodyAppropriate low pressure is set and maintainedModerLow-air-lossConstant air loss — microclimate management — dissipation of moisture between skin and mattressAt 100% relative humidity, the skin is 25 times weaker than at 50% humidity Alternating therapiesA critical aspect of therapy is the reduction of pressure on the patient's body to allow oxygen and nutrients to circulate freely and accelerate healing Zero pressure is achieved by alternating pressure within the 3-cell system of the mattress (3-cell and 2-cell system)

ALTERNATIONThe alternation regularly release the pressure under a patient by changing the pressure in different areas of mattress. This brings relaxation for skin in areas where is mattress deflated. Moreover, with 3-cell technology the alternation provides zero pressure, which fully eliminates the action of pressure on high-risk areas of the body.

CONSTANT LOW PRESSUREThe system automatically maintains the selected pressure value regardless of changes in the patient's weight distribution or position. This constantly optimizes the pressure acting on the skin.

PASSIVE SYSTEMA comprehensive range of static mattresses from single block Polyurethane foam to Viscoelastic 7 zoned mattresses, the CliniCare 30 having CLIMA technology to help manage the temperature at the patient skin mattress interface.

Virtuoso(ALTERNATING+CLP SYSTEM)

Highest clinical effectEnhanced care for proned patientsBattery Back-up24 hour care | Easy hygiene

Symbioso 200(CLP SYSTEM)

Semi-automatic systemEasily controllable from bed displayImproved prevention with MCM | Easy hygiene

Primacare(PASSIVE MATTRESS)

Weight limit 200 kgProfiling of foam on top

EffectaCare(PASSIVE MATTRESS)

Combination of standard PU foam with 7-zoned visco layer on topSideformersWeight limit 230 kg

Precioso(ALTERNATING+CLP SYSTEM)

Highest clinical effectReplacement & overlay version24 hour careEasy hygiene

ProphyCair(CLP LOW AIR-LOSS SYSTEM)

Improved prevention with low air-loss featureExceptional weight capacityOptional dimensions to fits bariatric beds

CliniCare 100 HF(REACTIVE SYSTEM)

High comfort for patientsProvides preventive effect without pumpProvides enhanced clinical effect in connection with pump (MCM, APT)

Air2Care(ALTERNATING AND CLP SYSTEM)

Effective & comfortableReplacement & overlay version24 hour careEasy hygiene

Complete immobility,unconsciousness

Partially mobilepatients at high risk of decubitus

Partially mobile patients after surgery

Mobile patients at risk of decubitus

Mobile patients at low risk ofdecubitus

I + I I

I I I

I V

Risk of pressure

ulcer development

EffectaCare

PrimaCare

CliniCare

ProphyCairBurn patients Low air-loss system

Symbioso 200

Air2Care

CliniCare 100 HF(reactive system)

Grade of existing pressure

ulcer

VirtuosoPatients in prone position

Precioso

Page 2: How to choose the right mattress? - LINETmedicalmattress.linet.com/downloads/brochure-en.pdf · Standard Critical Care Unit Intensive Care Unit Hospital Ward Nursing/Home Care Best

LINET | Art. nº 9631-1026 | Edition 11/2015 | Slight colour differences are possible. Change of technical parameters reserved.


Recommended