+ All Categories
Home > Documents > How to Install OLP-55 USB Driver

How to Install OLP-55 USB Driver

Date post: 25-Oct-2015
Category:
Upload: joao-gilberto-fernandes
View: 87 times
Download: 4 times
Share this document with a friend
Popular Tags:
22
How to install OLP-55 USB driver In Windows XP 1. Power on OLP-55, connect to PC using a USB cable. 2. In bottom-right tray area, will pop up a message: 3. Some seconds later, “Found New Hardware Wizard” dialog will be pop out, select “No, not this time”, then click “Next” button.
Transcript
Page 1: How to Install OLP-55 USB Driver

How to install OLP-55 USB driver

� In Windows XP 1. Power on OLP-55, connect to PC using a USB cable. 2. In bottom-right tray area, will pop up a message:

3. Some seconds later, “Found New Hardware Wizard”

dialog will be pop out, select “No, not this time”, then click “Next” button.

Page 2: How to Install OLP-55 USB Driver

4. In the next dialog, select “install from a list or specific

location (Advanced)” before click “Next” button.

Page 3: How to Install OLP-55 USB Driver

5. In the next dialog, make sure “Include this location in

the search:” check-box checked, and in following edit box, specify “C:\Program Files\JDSU\Handheld Manager Beta\olp_driver” (this folder may different depending on which folder Handheld Manager had been installed to), then click “Next” button.

Page 4: How to Install OLP-55 USB Driver

6. In the next pop up warning message box, click the first button “Continue Anyway”.

Page 5: How to Install OLP-55 USB Driver

7. Now, it is near finish. In this message box, click “Finish”.

Page 6: How to Install OLP-55 USB Driver

8. In desktop bottom right tray zone, it will pop up a message, “Your new hardware is installed and ready to use.”

Page 7: How to Install OLP-55 USB Driver

� Double check in Windows XP 1. In Windows desktop, select “My Computer” icon, right

click, select “Properties”.

Page 8: How to Install OLP-55 USB Driver

2. select “Hardware” tab, and click “Device Manager” button:

Page 9: How to Install OLP-55 USB Driver

3. Expand “Ports(COM & LPT) node, a new device named “USB Serial Ports Driver (JDSU) COMx” will be found. The port number at tail may be different depend on your system. If there is no device begin with ““USB Serial Ports Driver (JDSU)”, there may be some problems during driver installation.

Page 10: How to Install OLP-55 USB Driver

� In Windows7 1. Power on OLP-55, connect to PC using a USB cable.

Page 11: How to Install OLP-55 USB Driver

2. In bottom-right tray area, will pop up a message: driver not install successfully.

3. Launch “Control Panel”

Page 12: How to Install OLP-55 USB Driver

4. Select “Hardware and Sound”

Page 13: How to Install OLP-55 USB Driver

5. Select “Device Manager”

Page 14: How to Install OLP-55 USB Driver

6. In “Device Manager”, it will find “Unknown device”

Page 15: How to Install OLP-55 USB Driver

7. Right click “Unknown device”, select “Update Driver Software …”

Page 16: How to Install OLP-55 USB Driver

8. In next message box, click “Browse my computer for driver software”

Page 17: How to Install OLP-55 USB Driver

9. Specify “olp_driver” subfolder of handheld manager installed folder in the edit box, then click “Next” button.

Page 18: How to Install OLP-55 USB Driver

10. In the next “Windows Security” warning message, select “Install this driver software anyway”.

Page 19: How to Install OLP-55 USB Driver

11. Wait some seconds, Windows is installing driver now.

Page 20: How to Install OLP-55 USB Driver

12. Driver installation finished.

Page 21: How to Install OLP-55 USB Driver

13. After successful installation, in the “Device Manager” of Windows, a new device named begin with “USB Serial Ports Driver (JDSU)” will be found, otherwise, the driver installation is failed.

Page 22: How to Install OLP-55 USB Driver

Recommended