Description:
Autumn Pendulum Materials 7.85" of 20 gauge wire - for the base around 10" of 28 gauge wire to attach smaller beads to the base 3 roundel beads - size 6mm x 4mm 4 glass beads - size around 4mm to 5mm Tools: •round-nose pliers •wire cutters Step1: Put glass bead on wire, and wrap as close as you can to the wire. Step 2: Continue to loop and wrap glass beads “1/4” apart from each other. Step 3: Bend the wire to create a closed loop, wrap wire around and cut. Step 4: Take the thinner wire, wrap roundels, and cut accordingly. (repeat for all beads) Step 5: Attach the last two beads using only one wire. Cut all remaining wires and smooth edges. Step 6: Attach chain & pendant is ready to wear!
