Date post: | 05-Dec-2014 |
Category: |
Education |
Upload: | tsuyoshi-horigome |
View: | 2,690 times |
Download: | 4 times |
PART NUMBER: R6046ANZ
MANUFACTURER: ROHM
How to make symbol of Mosfet model
(LTSpice)
Content
• Library File
• Draw Symbol
• Edit Attributes
• Add Attributes
• Save and Copy Symbol
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 2Monday, April 10, 2023
Library File
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 3
.SUBCKT name
.SUBCKT name
Pin 1, 2 and 3 (Mosfet)
Pin 1, 2 and 3 (Mosfet)
Monday, April 10, 2023
Draw Symbol (Step 1/1)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 4
Click File and Select New
Symbol
Click File and Select New
Symbol
Monday, April 10, 2023
Draw Symbol (Step 1/2)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 5
Click Draw and Select
Line for Draw New Mosfet Symbol
Click Draw and Select
Line for Draw New Mosfet Symbol
Monday, April 10, 2023
Draw Symbol (Step 1/3)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 6
New Diode Symbol can done
New Diode Symbol can done
Monday, April 10, 2023
Draw Symbol (Step 1/4)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 7
Click Edit and Select
Add Pin/Port
Click Edit and Select
Add Pin/Port
Monday, April 10, 2023
Draw Symbol (Step 1/5)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 8
Set Label value 1, 2 and 3 then put Pin/Port
on The Symbol
Set Label value 1, 2 and 3 then put Pin/Port
on The Symbol
11
The New Pin/Port Properties
Window has been opened
The New Pin/Port Properties
Window has been opened
22
33
Monday, April 10, 2023
Edit Attributes (Step 2/1)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 9
Click Edit and Select
Edit Attributes
Click Edit and Select
Edit Attributes
Monday, April 10, 2023
Edit Attributes (Step 2/2)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 10
The New Symbol Attribute Editor
Window has been opened
The New Symbol Attribute Editor
Window has been opened Click Symbol Type
Tab and Select Cell
Click Symbol Type Tab
and Select Cell
Monday, April 10, 2023
Edit Attributes (Step 2/3)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 11
Double Click Prefix Tab and Type X in
value column
Double Click Prefix Tab and Type X in
value column
Monday, April 10, 2023
Edit Attributes (Step 2/4)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 12
The SUBCKT name must match
The SUBCKT name must match
Double Click SpiceModel Tab and Type SUBCKT name
in value column
Double Click SpiceModel Tab and Type SUBCKT name
in value column
Monday, April 10, 2023
Add Attributes (Step 3/1)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 13
Click Edit and Select
Attributes window
Click Edit and Select
Attributes window
Monday, April 10, 2023
Add Attributes (Step 3/2)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 14
The New Attribute Window to Add Window has been opened
The New Attribute Window to Add Window has been opened
Monday, April 10, 2023
Add Attributes (Step 3/3)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 15
Select InstName Tab
Select InstName Tab
And Click OKAnd Click OK
Monday, April 10, 2023
Add Attributes (Step 3/4)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 16
InstName Is added
InstName Is added
Monday, April 10, 2023
Add Attributes (Step 3/5)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 17
Select SpiceModel Tab
Select SpiceModel Tab
And Click OKAnd Click OK
Monday, April 10, 2023
Add Attributes (Step 3/6)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 18
SpiceModel is added
SpiceModel is added
Monday, April 10, 2023
Save and Copy Symbol (Step 4/1)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 19
Click File and Select Save AsClick File and
Select Save As
Monday, April 10, 2023
Save and Copy Symbol (Step 4/2)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 20
Select Destination Folder and Set File name
Select Destination Folder and Set File name
Monday, April 10, 2023
Save and Copy Symbol (Step 4/3)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 21
Copy/Paste symbol file into C:\Program Files\LTC\LTspiceIV\lib\
sym
Copy/Paste symbol file into C:\Program Files\LTC\LTspiceIV\lib\
sym
Destination FolderDestination Folder
CopyCopy
And PasteAnd Paste
Monday, April 10, 2023
Save and Copy Symbol (Step 4/4)
All Rights Reserved Copyright (C) Bee Technologies Corporation 2012 22
Copy/Paste symbol file into C:\Program Files\LTC\LTspiceIV\lib\
sub
Copy/Paste symbol file into C:\Program Files\LTC\LTspiceIV\lib\
sub
Destination FolderDestination Folder
CopyCopy
And PasteAnd Paste
Monday, April 10, 2023