ADP Ev5 Cliff Notes
Payroll_Using_eTIME_V10 Updated: 10.20.10 Page 1 of 40
How to Process Payroll (Using Ev5, eTIME – Import)
This cliff note is used when you are importing an External Pay Data Input (EPIP) file - for hourly (non-exempt) biometric time clock or PC based eTIME.
Exceptions to the process are located at the END of this document for your reference.
1. Click Payroll function group and make the following selections: Payroll Cycle ~ Step 1: Start New Payroll Cycle ~ Pay Cycle Settings
2. Enter your Pay Group and Type as noted in the following:
3. Click OK - The Dates panel appears.
Figure 1 – Payroll Cycle Settings View
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 2 of 40
4. Click the Scheduled button. A list of pay periods will appear
5. Select Year [insert current year], Wk Number - Notify Corporate Payroll Manager of any changes to a scheduled payroll or if you want to create an unscheduled payroll cycle.
Review Pay Group/Group Name/Type/Year/Week
6. Click Save and close the panel by clicking on the Red
Figure 2 – Dates Panel
7. Click the Deduction Calculation Settings (be sure to click on the Button)
8. Enter Pay Group, Type, Autolink Payroll Run Year, Week, Autolink Payroll Number
9. Click OK - The Add Deduction Calculation panel will appear.
Figure 3 – Add Deduction Calculation View
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 3 of 40
10. Select (Re)Calculate All radio button
11. Save
12. Close Deduction Calculation Settings by clicking on the Red
Figure 4 – Deduction Calculation Settings Panel
13. Go to Enterprise eTIME https://eetime31.adp.com/ib4e/logon using Internet Explorer
Figure 5 – Enterprise eTIME Internet Web Address View
14. Log into Enterprise eTIME
Figure 6 – Log On View
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 4 of 40
15. Click on Timekeeping ~ Pay Period Close QuickNav
Figure 7 – Pay Period Close View
16. Select your pay group query in the Show field
17. Sort on Manager Approval column to view a “1” in each columna) If there is not a “1” present in the column, then seek manager to approve timecards
Figure 7 – Manager Approval View
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 5 of 40
18. Highlight all employees using Actions/Select All
19. Select Approvals ~ Sign Off ~ Refresh
Figure 8 – Approvals/Sign Off View
20. Click on Timekeeping ~ Pay Period Close QuickNav
21. Select your pay group query in the Show field
22. Select Actions, Select All to highlight all employees in the group you need to include in the report
23. Select Reports (the black text Reports)
Figure 9 – Reports View
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 6 of 40
24. Select All
25. Select Detail QuickNav ~ Employee Hours by Labor Account
26. Click Run Report and save to local desktop
Figure 10 – Run Reports View
27. Select General Menu ~ Actions ~ Payroll Export
Figures 11 and 12 – General Menu and Payroll Export View
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 7 of 40
28. Enter Co Code & Select Previous radio button
29. Leave the start/end dates empty
30. Select Run Export
31. Wait for an email in your eTIME Inbox that states your export is complete
Figures 13 and 14 – General Menu and Inbox View
32. Exit Enterprise eTIME by clicking
33. Exit Internet Explorer by clicking the Red
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 8 of 40
34. Click Payroll function group and make the following selections: Payroll Cycle ~ Step 2: Enter Pay Period Information ~ Import Pay Information
35. Enter Pay Group
36. Click OK - The Import Pay Information Panel appears.
37. Select CSV files radio button
38. Click Load File. The Pay File Load box will appear.
Figure 15 – Import Pay Information Panel
39. Select your pay group file by double clicking (prxxxepi.csv) (xxx = pay group)
Figure 16 – Pay File Load Box
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 9 of 40
40. The Batch Process Request box will appear
41. Click OK
42. Click Red to close Import Pay Information Panel
Figure 17 – Batch Process Request Box
43. Click on the Process Monitor Icon (looks like an hour glass)
44. Watch for Success under status
45. Wait for Success status (use the refresh button to refresh status)
46. Double Click on detail next to your report
Figure 18 – Process Monitor Box
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 10 of 40
47. Status Information box a) Number of Errors: should be 0b) Number of Warnings: should be 0c) Batches Imported: should be 1d) Number of Pay data transactions imported: should equal number of teammates on punch
detail reportTO VIEW WARNINGS & ERROR MESSAGES:
a) Go to Reports Outputsb) Change the extension to .LOGc) Double click on the reportd) Read all errors and warningse) Warnings that are OK – proceed if warnings are:
a. “Warning: Regular Hours value is zero”b. “Warning: Due to existing entries, this transaction was saved at entry level
two”f) Errors are NOT okay and need to be addressed. Errors may mean that your file
numbers do not match. If you are unsure how to correct, STOP. Contact a mentor to assist you prior to proceeding.
48. Select “Return” – which returns you to the Process Monitor Panel
49. Close Monitor Processes Box
Figure 19 – Process Detail Panel
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 11 of 40
50. Select Enter Pay Information Panel
51. Enter Pay Group
52. Click OK
Figure 21 – Enter Pay Information View
53. Select your batch(s) with a checkmark
54. Click on the Totals button
Figure 22 – Batch Maintenance Panel
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 12 of 40
55. Verify totals and enter into control fields to balance (DO NOT USE AUTO BALANCE)
56. Click Save
Figure 23 – Hours/Earnings Panel
EXCEPTION ONLY SITUATION: If and only if you need to MODIFY A BATCH to ADJUST HOURS/EARNINGS from previous pay periods or for adjusting deductions.: See Exception section of this document
EXCEPTION ONLY SITUATION: If and only if you need to DELETE A BATCH: See Exception section of this document
EXCEPTION ONLY SITUATION: If and only if you need ADJUST HOURS from previous pay periods or for adjusting deductions: See Exception section of this document
EXCEPTION ONLY SITUATION: If and only if you need to ADD or DELETE a TEAMMATE from the batch: See Exception section of this document
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 13 of 40
57. Click Payroll function group and make the following selections: Payroll Cycle ~ Step 4: Process/Review Deductions ~ Calculate Deductions
58. Go to Calculate Deductions Panel
59. Enter Pay Group, Type (P), Autolink Payroll Run Year, Wk Number, Autolink Payroll Number
Figure 24 – Calculate Deductions View
60. Select Auto-Confirm When No Errors by checking the box
61. Click the Calculate Deductions button, Batch Process Request Box will appear
62. Click OK
Figure 25 – Calculate Deductions Panel
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 14 of 40
63. Click the Process Monitor button to check the status of alpdrun
64. Wait for a Success under status
65. Double Click on detail grey box to view your report, the Status Information Box will appear
Figure 26 – Process Monitor Box
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 15 of 40
66. Week Number: should be current pay week
67. Payroll Number: should be 1
68. Pay Group: should be your pay group (xxx)
69. Status: Successful Completion a) Errors are NOT okay and need to be addressed. If you are unsure how to correct,
STOP. Contact a mentor to assist you prior to proceeding.
70. Click the Close button.
71. Close the Process Monitor box.
Figure 27 – Status Information Box
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 16 of 40
72. Click Payroll function group and make the following selections: Payroll Cycle ~ Step 4: Process/Review Deductions ~ Review Calculated Deductions
73. Go to Review Calculated Deductions Panel
74. Enter Pay Group, Autolink Payroll Run Year, Week Number
75. Click OK
76. Look at all Active Teammate’s Status Columns: should read Confirmed
All entries in the pay status column should read Confirmed. If not, then there is a problem. Either the "Auto Confirm When No Errors” box was not checked or there are errors that need to be fixed. If there are errors, "Calculate Deductions" needs to be done again after the errors are fixed. If all entries read "Calculated", then "Calculate Deductions" needs to be done again making sure the "Auto Confirm When No Errors" box is checked.
77. Close out of the dialogue box
Figure 28 – Review Calculated Deductions View
EXCEPTION ONLY SITUATION: If and only if you need to UNCALCULATE DEDUCTIONS if you had to reject your payroll and need to calculate your deductions after fixing your errors: See Exception section of this document.
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 17 of 40
78. Click Payroll function group and make the following selections: Payroll Cycle ~ Step 7: Process Payroll ~ Create ADP Payroll File
FYI: Create ADP Payroll file – aka: Prepare for Transmission or PFT
79. Click OK
Figure 29 – Create ADP Payroll File View
80. Click Run Prepare for Transmission
Figure 30 – Prepare for Transmission Panel
81. Click OK to the Batch Process Request message
82. Open the Process Monitor and confirm that the PFT process has a status of Success
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 18 of 40
83. Click Payroll function group and make the following selections: Payroll Cycle ~ Step 5: Run Reports and Verify Payroll Input ~ Pay Data Summary Report (ALPAY001)
Shows summary information on pay data transactions for a selected pay group, with hours and earnings subtotal for each batch.
84. Double Click on Pay Data Summary Report (ALPAY001)
85. This Report should Auto Load, if it does not, Enter Pay Group, Type and select OK
86. Enter Pay Group in the Name Field
87. Click on Run Report
Figure 31 – Pay Data Summary Panel
88. Click OK on the Run Process Submission Box
Figure 32 – Run Process Submission Box
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 19 of 40
89. Click on Process Monitor . Wait for a Success under status90. Close the Process Monitor.
Figure 33 – Process Monitor Panel
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 20 of 40
91. Go to Reports Output
92. Highlight the report from the Report Outputs box
93. Double click on the report, the File Viewer box will appear.
Figure 34 – Reports Output View
94. Review and/or print the report
95. Close the File Viewer box.
Figure 35 – File Viewer Box
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 21 of 40
The Employee Changes report (ALPAY016) automatically runs at the end of the Create ADP Payroll File process. It lists all teammate changes that have been entered since the previous pay period. You should always review this report for accuracy before submitting payroll.
96. Click the Report Outputs button
97. The Look in field should be set to User Directory.
98. Verify that the File with extension field is lis.
99. Double-click alpay016_22.lis.
100. Review the Employee Change Report for errors
101. Close the Employee Change Report and the Report Outputs windows
Figure 36 – File Viewer Box
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 22 of 40
102. Click Payroll function group and make the following selections: Payroll Cycle ~ Step 7: Process Payroll ~ Transmit ADP Payroll File
103. Enter Pay Group, Type (P)
104. Click OK
105. Type GNCO in the Password field
106. Check the Generated by PFT (.PAY, .CCD) checkbox defaults selected. This will send your .pay file to AutoPay
107. Click the Save button.
108. Close the Transmit Files Panel by clicking Red
Figure 37 – Transmit Files Panel
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 23 of 40
109. Open the Process Monitor
110. Confirm that the CommRqst process has a status of Success
111. Close the Process Monitor
112. Go to ADP Payroll Quick View www.quickview.adp.com using Internet Explorer
Figure 38 – QuickView Internet Explorer View
113. Log into QuickView
Figure 39 – Log On View
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 24 of 40
114. The available reports are displayed on the home page
115. Select a set of reports by using the Filter fields to locate the report
116. Click in the Company filter field and select XXX
117. Click in the Week filter field and select XX
118. Click the Filter button, available payroll processing will appear
119. Click Payroll Processing, available reports will appear
Figure 40 – View Reports View
120. View the following reportsa) PRV Payroll Registerb) PRV Personnel Change Report
Figure 41 – View Collated Set View
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 25 of 40
121. After confirming payroll is correct, Click or close the browser
122. Restore ADP Enterprise HR Payroll Screen or login again
123. Click Payroll function group and make the following selections: Payroll Cycle ~ Step 8: Review/Process Payroll Results ~ QuickView
124. Select either the Accept or Reject checkbox
125. Enter the communications password in the Password field and press TAB
126. Click Transmit Response(s)
127. Click on Process Monitor . Wait for a Success next to the CommReq under status
128. Close the Process Monitor.
*****If you need to reject your payroll, contact your payroll administrator*****
Figure 42 – QuickView Panel
If you accepted the payroll, AutoPay finishes processing your payroll.
If you rejected the payroll, AutoPay clears your payroll. Your cycle returns to its status prior to creating the payroll file. (The batches you have created are available for modification; you do not need to import and/or upload your batches again). After making changes it is necessary to unconfirm and reconfirm deductions. You will need to repeat the steps to Create ADP Payroll File and Transmit ADP Payroll File to retransmit it to ADP. You should allow 15-20 minutes after the rejection is received before resubmitting a new payroll.
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 26 of 40
129. Go to ADP Pay www.ireports.adp.com using Internet Explorer
Figure 43 – iReports Internet Explorer View
130. Log into iReports, Reports page will appear
Figure 44 – Log On View
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 27 of 40
131. Click Payroll Processing for the appropriate week
Figure 45 – iReports View
132. Click on the box to the left of Report Name to select ALL Reports for that week
133. Click Add to Basket, a message box will appear
Figure 46 – Report Set View
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 28 of 40
134. Click OK, same screen will appear
Figure 47 – Message Box
135. Click on View Basket, Reports in basket will appear
Figure 48 – Report Set View
136. Click on Zip Download
Figure 49 – View Basket
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 29 of 40
137. Click on Proceed
Figure 50 – Zip Download Window
Figure 51 – Zip Download Window while processing
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 30 of 40
138. If error message pops up, Right Click
139. Select Download File, the File Download box will appear
Figure 52 – Zip Download Window with security pop up
Figure 53 – Zip Download Window with Download File
140. Click Save
Figure 54 – File Download Box
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 31 of 40
141. Name the File “Year – Week Number – Company Code”
Figure 55 – Save As View
142. Print the necessary reports for the facility payroll file
PAYROLL IS NOW COMPLETE!
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 32 of 40
Reports that can be run via Step #5: Run Reports and Verify Payroll
• Special Entries/Balance Adjustments Report (ALPAY02A)
• Manual Check Detail Report (ALPAY003)
• Automatic Pay Cancellations Report (ALPAY005)
• Active Hourly Employees without Hours Report (ALPAY010)
• Inactive Employees with Paydata Report (ALPAY011)Additional reports may have been set up for you in ADP Processing.
Extra Information
The Following types of files may be sent to or received from AutoPay: Files sent to AutoPay Files received for AutoPay.pay – contains new hire information, teammate level changes, and pay data entry batches.
.det – contains check detail information for the current period
.wgu – contains payee information for WGPS. .ytd – contains year to date accumulations for taxes, deductions, & earnings.
.pun – contains punch detail information from an eTIME system.
.dba – contains masterfile information from Auto Pay.
.ccd – (Company Control Details file) contains statistical information for regional reporting and billing.
.ye2 – Year end file that contains file numbers for reuse. .ess – Event Scheduling System file that contains the pay period begin and end dates and check dates. GLI - General Ledger Interface file.MR – Management Report files.
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 33 of 40
EXCEPTION ONLY SITUATION: If and only if you need to VIEW or MODIFY CYCLE STATUS
a. Click Payroll function group and make the following selections: Payroll Cycle ~ Step 6: View or Modify Cycle Status ~ Modify Cycle Status
Contact your payroll administrator for assistance
The Modify Cycle Status panel can be used to reset or advance the payroll cycle. For example, if you run Prepare for Transmission and then need to enter more pay data, you could reset the payroll cycle back to the Data Entry/Transmittal Done step. You would then need to rerun Prepare for Transmission and transmit the resulting files to AutoPay. _____________________________________________________________________Note: Before you change your status back to Data Entry mode, you need to work with your ADP Solution Center consultant.
b. Enter Pay Group and Type (P)
c. Click OK. The Cycle Status panel appears. The last step competed is Transmit Files requested. The next step in a normal cycle would be Transmit Files done.
d. Select Transmit Files done in the Change State To field.
e. Click Save. Cycle Status Change box appears.
f. Click Yes to respond to the message.
g. Close the panel.
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 34 of 40
EXCEPTION ONLY SITUATION: If and only if you need to DELETE A BATCHa. Click Payroll function group and make the following selections:
Payroll Cycle ~ Step 2: Enter Pay Period Information ~ Enter Pay Informationb. Enter Pay Group if search screen pops upc. Put a check mark in the box next to the batch you would like to delete
d. Select Delete a Row
e. SAVE
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 35 of 40
EXCEPTION ONLY SITUATION: If and only if you need to ADJUST HOURS/EARNINGS from previous pay periods or for adjusting deductions.
a. Click Payroll function group and make the following selections: Payroll Cycle ~ Step 2: Modify Pay Period Information ~ Modify Pay Information
a. Enter Pay Group
b. Click OK
c. Select a teammate by highlighting and double clicking
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 36 of 40
d. Enter any necessary changes to Hours/Earnings on this panel
e. Enter any necessary deduction adjustments on this panel as instructed by corporate
f. Double click on next teammate that may need adjustments
g. If no other teammate needs changes made, Click the Red
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 37 of 40
EXCEPTION ONLY SITUATION: If and only if you need to ADD or DELETE a TEAMMATE from the batch
a. Click Payroll function group and make the following selections: Payroll Cycle ~ Step 2: Modify Pay Period Information ~ Add or Delete Employees from a Batch
a. Enter Pay Group if search screen pops up
b. Select Insert a Row to add a teammate
c. Use looking glass (pop up window) to select teammate
d. To Delete a Teammate: put a check mark in the box of teammate you would like to Delete
e. Select Delete a Row
f. SAVE
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 38 of 40
g. If you modify hours worked, you MUST go back and rebalance hours
h. Go to Enter Pay Information
i. Enter Pay Group
j. Click OK
k. Select your batch(s) with a checkmark
l. Click on the “Totals” Button
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 39 of 40
m. Verify totals and enter into control fields to balance (Use your Punch Detail Report from your timekeeping system) (DO NOT USE AUTO BALANCE)
n. Click Save
GENCO – ADP Ev5 Cliff Notes -- Payroll_V9 -- Updated: 05.11.10 -- Page 40 of 40
EXCEPTION ONLY SITUATION: If and only if you need to UNCALCULATE DEDUCTIONS if you had to reject your payroll and need to calculate your deductions after fixing your errors: See Exception section of this document
Please note: If you make a change to a deduction after you complete the step of Calculate Deduction, you must redo that step. Before you can rerun Calculate Deduction, you must first “Unconfirm Deductions”.
a. Click Payroll function group and make the following selections: Payroll Cycle ~ Step 4: Process Review Deductions ~ Unconfirm Deductions
b. Click the Unconfirm Deductions button
c. This box will come up, click ok.
d. Click on the Process Monitor. Wait for Success under status for the alpdcunc
e. Close the Process Monitor. Go back to # 55 to Calculate Deduction.