How to resolve the issueof Brother Printer

Error 49?

Brother Printers are no doubt one of themost popular printers across the world. Also,the printers are user-friendly and rarelysomeone finds it difficult to access it. Butthere are times when things go south, youmay see some issues and get stuck with anerror i.e. Brother Printer error 49.

In that case, you shouldn't worry to fixBrother Printer error 49 because this post willhelp you thoroughly to fix the glitch. Andalso, you will get to know the cause behind it.So, read the article and fix the error 49 onBrother Printers.

What Causes Brother PrinterError 49

When you see Brother Printer Error 49 while using it, itindicates there is something wrong with the ink absorber

pad. It may be full and needs replacement.

It is one of the most important things to consider whileusing a printer and actually, you don't need to replaceanything to fix Brother Printer error 49. And doing so is

quite an easy task even simple than you think.

How To Reset And Clear The Brother PrinterError 49

You can get rid of this glitch by doing the given steps. Inthis way, you can put the printer into maintenance mode:First of all, you need to unplug the power cord from theprinter.Then you're required to press the Menu button or the Startbutton. (You don't need to press and hold both buttons butif you don't have either Menu or Start button, you canpress the Set button basically they all are the samebuttons).

While pressing the button, you need to plug the power cord backin the same slot and don't release the button until you find themaintenance mode notification on the screen.

After that, you will see the Maintenance on the screen of yourBrother printer.