How To Scan Concrete Slabs For Rebar

Before you decide to tear up a concrete slab, it's a good idea to know where the rebar is. It's one thing to use equipment to break through a concrete structure, and another to come into contact with metal which can damage some equipment.

More info on:http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

The problem with finding rebar is that you cannot see it, and therefore you must use certain types of equipment to discern where it is so that you can break the concrete slab quickly and effectively. Here are some tips on how to scan concrete slabs for rebar.

More info on:http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

Ground Penetrating RadarThe best way to scan concrete slabs for rebar is to use ground penetrating radar. This is technology that is able to send signals into the concrete, and based upon how it returns as processed by the computer system, you can determine where the rebar is throughout the concrete slab.More info on:

http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

This will make it easier to plan the way you are going to break the rebar apart, making it a very safe operation for all of those involved. Obviously, if you are using a backhoe or larger pieces of equipment for this type of task, the size of these concrete removing devices will prevent them from being damaged.

More info on:http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

GPRS Technicians

One other valuable asset that you can have on the job site is a person that is trained as a ground penetrating radar technician. These individuals will be able to quickly scan the information that is provided in order to interpolate what has been found.

More info on:http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

They will be able to map the exact areas where the rebar is located beneath the surface, ensuring that no reinforcing steel will get stuck during the drilling process. By having all of this equipment, and the experienced technicians that you will need to scan concrete slabs for rebar..

More info on:http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection