How to Setup PureVPN Manually on Mac:
NOTE: If you are using Mac latest version El Capitan, you can also use this
guide to set up PureVPN on your Mac.
Here's how to setup PureVPN with manual settings on Mac devices:
Step 1: Click on Apple icon and select "System Preferences....."
Step 2: Click on "Network"
Step 3: Click on "+" icon from bottom right to create new connection
Step 4: Click on Interface Menu
Step 5:Insert the following info:
Select VPN from Interface drop down menu
Select PPTP from VPN Type drop down menu
Insert Service name as PureVPN (PPTP)
Step 6:Insert the following info:
Copy Server address from the list given on the main File and past in
the “Server Address Section”
Insert VPN username in Account name box as provided by PureVPN
Select desired encryption from Encryption drop down menu. For
Streaming purpose select "None"
Check "Show VPN status in menu bar"
Now click on "Authentication Settings.."
Tip: Do not copy/paste your username or password instead type it
manually.
Step 7:Insert VPN Password in Password box as provided by PureVPN
Step 8:Click on Advanced...
Step 9:Check "Send all traffic over VPN connection" and hit OK
Step 10:Click on "Apply"
Step 11:Click on "Connect"
Step 11: You are conencted now. Enjoy the FREEDOM!!!!!