How To Use The Horseware® Liner system
Shown using the Rambo® Duo and Horseware® Liner
1Front closure (Rambo® Duo features the patented ‘V’ Front Closure)
Unfasten the front closure and velcro to expose the Horseware® Liner
2 Horseware® Liner closes in the front with one surcingle - it does not hook to the turnout at the chest
3 Remove neck cover (where applicable)
4
5After removing the neck cover and opening the blanket you will see the liner loops located on the inside of the turnout
The liner fastens to the turnout through the liner loops with velcro
6 At the rear of the blanket there are two D-rings. One for the tail cord and one for the liner
7 The liner attaches to the D-ring with a snap hook
8®
www.horseware.com