+ All Categories
Home > Documents > HP.ActualTest.HP0-S31.v2011-11-12.Jawed.112q

HP.ActualTest.HP0-S31.v2011-11-12.Jawed.112q

Date post: 24-Oct-2014
Category:
Upload: bane011
View: 19 times
Download: 0 times
Share this document with a friend
Popular Tags:
37
Managing Windows & Linux Servers Systems Number : HP0-S31 Passing Score : 900 Time Limit : 120 min File Version : 1.0 HP HP0-S31 By JP Managing Windows and Linux Servers Systems Version: 4.1 HP HP0-S31 Exam
Transcript

Managing Windows & Linux Servers Systems

Number: HP0-S31Passing Score: 900Time Limit: 120 minFile Version: 1.0

HP HP0-S31 By JP

Managing Windows and Linux Servers Systems

Version: 4.1 HP HP0-S31 Exam

Exam A

QUESTION 1You have a Windows Server 2008 R2 Server Core installation in production use. It is a file server used to storegraphics files for a group of graphic artists. You have installed 4TB of new disk space on the server. You needto configure the new disk space for use by the graphic artists. Which utility should you use on this server topartition and format the new disk space?

A. DiskPart

B. Server Manager

C. FDisk

D. Disk Management

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 2You have a Windows Server 2008 R2 server running as a virtual machine. It serves as an application server fora web-based application. All the web and application data are stored on a separate virtual disk that the serverhas designated as drive D. Drive D is getting low on disk space. To address this problem you have just added aphysical disk. How do you add disk space to drive D?

A. Add a new disk drive to the host server and use Control Panel > System to add the new disk to drive D

B. Use Windows Disk Management to create a new virtual disk and expand the volume on drive D

C. Use your virtualization software to expand the size of the virtual disk. Windows will automatically expand thesize of drive D

D. Use your virtualization software to add a second virtual disk and use the Windows Disk Management tool toexpand drive D

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 3Which Linux command-line tool is commonly used to quickly view a server's disk partitions and spaceavailability?

A. du

B. mount

C. fdisk

D. df

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 4You have a Windows Server 2008 R2 server. You need to copy data onto the server from an external disk driveusing a USB connection. When you plug in the USB cable, the server recognizes the drive but does not assignit a drive letter. Which server utility should you use to assign a drive letter to the USB drive?

A. Control Panel > System > Removable Drives

B. Server Manager > Storage > Disk Management

C. System Manager > Disk Manager > Removable Drives

D. Control Panel > Administrative Tools > Storage

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 5Which types of problems must be resolved with Linux Rescue mode? (Select two.)

A. a data disk that will not mount

B. a corrupted boot loader

C. an unbootable system

D. loss of network connectivity

E. a partition that will only mount in read-only mode

Answer: BC

Section: (none)

Explanation/Reference:Explanation:

QUESTION 6You have been assigned responsibility for a Red Hat Enterprise Linux 5 server. The previous administrator wasterminated without notice and is not available for contact. No one in your organization knows the root passwordfor the server. What should you do to recover the root password for this server?

A. Boot the server into Safe mode.

B. Log in with the guest account and run the pw-recover command.

C. Boot the server in single user mode.

D. Acquire a root recovery disk from Red Hat support.

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 7Your company web server is down. It runs on Red Hat EL. When it boots, the system stops at the "grub>"prompt. No data partitions are accessible. What is most likely the cause of this problem?

A. The master boot record is missing.

B. The root disk drive has been removed.

C. The system cannot find the grub.conf file.

D. The boot partition is corrupt.

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 8There is a power failure at one of your company's branch offices. A Red Hat EL server operates at that locationto run a critical financial application. Users report that the financial application is not working. When youexamine the server, it appears to be up and running but the financial application is not. Further investigationshows that the data volume was corrupted. After repairing the volume, the application still reports that aconfiguration file is missing. Where do you look to see if the file system repair utility moved some damagedfiles?

A. /tmp

B. /lost+found

C. /sys/disk

D. /var

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 9There is a power failure at one of your company's branch offices. A Red Hat EL server operates at this locationto run a critical financial application. Users report that the financial application is not working. When youexamine the server, it appears to be up and running but the financial application is not. When you try to start theapplication, you receive the error message, "Data directory cannot be found." You know that the data for thisapplication is located on a separate disk volume mounted at /var/findata. When you check this directory, it isempty. What is your next step in troubleshooting this problem?

A. Run the fdisk --scan command at the system console.

B. Run the chkdsk command at a bash prompt.

C. Examine the system logs and look for mount errors.

D. Scan the server's file system for the missing files.

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 10You have an HP ProLiant DL380 G6 server running Windows Server 2008 R2. The server is configured with

five 146GB drives in a hardware-based RAID 5 configuration. You notice that one of the disk drives is showingan amber warning light. When you check the server, you can see no errors indicating disk problems. How canyou discover the cause of the amber light?

A. Access the array configuration utility.

B. Access the BIOS configuration utility.

C. Boot into Safe Mode and run a repair on the disk volume.

D. Reboot the server, press Ctrl-A and run a disk check.

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 11You have a Red Hat EL server. You need to install the Java 1.6 SDK because it is required by an applicationthat will soon be installed on the server. The server is properly registered with the Red Hat Network. Whichmethods can be used to install the Java software packages? (Select two.)

A. Use the YUM tool to download and install directly from redhat.com.

B. Download the Java.1.6.0.exe binary installer and run it on the server.

C. Launch the auto-install tool in the Kickstart utility.

D. Download the rpms and install with the rpm -i command.

E. Use the Software Manager GUI to download and install the software.

Answer: AD

Section: (none)

Explanation/Reference:Explanation:

QUESTION 12You have just installed a Windows Server 2008 R2 server into your existing Active Directory environment. Youwant this server to serve as a backup domain controller to provide redundancy for your Active DirectoryEnvironment. Which role must you install on this server to make it a domain controller?

A. Active Directory Domain Controller

B. Active Directory Federation Services

C. Active Directory Domain Services

D. Active Directory Replication Services

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 13Which Windows Server 2008 R2 utilities will show the CPU utilization of a running server? (Select two.)

A. Resource Monitor

B. System Properties

C. Device Manager

D. Memory Manager

E. Task Manager

Answer: AE

Section: (none)

Explanation/Reference:Explanation:

QUESTION 14Your company's DBA is complaining that his MySQL database server is slow. The server runs Red Hat EL. Youlog in to the server console and find that CPU utilization is not high. Since the server is a virtual machine usingSAN disk storage, you suspect slow disk performance. What Linux utility will show you disk performance on thisserver?

A. fdisk

B. top

C. iostat

D. diskmon

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 15Which server utility will allow you to change the size of the pagefile.sys file on a Windows Server 2008 R2server?

A. Device Manager > Virtual Memory

B. Server Manager > Performance Tuning

C. Control Panel > System > Advanced System Settings

D. Administrative Tools > Computer Management > Virtual Memory Manager

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 16Performance on a 3-year old Red Hat EL server is poor. CPU utilization is normal so you suspect a program isusing too much memory. Which server utilities will show you both memory and swap file usage statistics?(Select two.)

A. lsof

B. vmstat

C. iostat

D. pstop

E. top

Answer: BE

Section: (none)

Explanation/Reference:Explanation:

QUESTION 17You have a Red Hat EL server running in production on a rack-mounted HP Proliant DL-360 G6. You need toinstall software on the server from a DVD disk. You insert a DVD drive into the empty drive bay while the serveris running. Which Red Hat Linux console command should you run to probe for new hardware and add theDVD drive to the server's hardware configuration?

A. kudzu

B. devprobe

C. modprobe

D. mount

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 18Which Linux console command will display all kernel drivers running on a Linux server?

A. lsdrvr

B. hwinfo

C. lsmod

D. cat /proc/drivers

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 19You have a Windows Server 2008 R2 server that provides file and print services for the users in your building.Users are reporting that they cannot access the server but they can access Internet sites. You check the fileserver and find that all the normal services and shares seem to be up and running. What is your nexttroubleshooting step?

A. Have a user try to ping the server IP address.

B. Reboot the server.

C. Restart the Server Service.

D. Check to see if the DNS server is up and running.

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 20You have a new Windows Server 2008 R2 server. The server needs to be a member server in your ActiveDirectory domain. When you try to join this server to the domain, you get the message, "The network path wasnot found." What is likely the cause of this error?

A. DNS settings are not properly configured on the new server.

B. The Global Catalog Service is not running.

C. The Primary Domain Controller is not properly replicating with other domain controllers.

D. The SYSVOL share is not properly configured.

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 21On a Windows Server 2008 R2 server, which command will flush the DNS cache?

A. netstat /f

B. net dns /repair

C. ipconfig /flushdns

D. netsh dns /f

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 22You have written a script to run a nightly backup of a Red Hat EL server. You save the script in the /root/bindirectory. How do you make the script run each night at 7:00 pm?

A. Move the file to the /etc/cron directory.

B. Change the owner of the file to cron:cron.

C. Add a line to the /etc/crontab file.

D. Configure it with the Red Hat Task Scheduler.

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 23You manage a Red Hat EL server that runs the web server for your company Intranet. The website is anApache/Tomcat application. The website developer sent you a new war file with some changes for the website.After you applied the war file, the website stopped working. When troubleshooting this problem, you find thatthe owner of the war file is root rather than the wwwrun user. Which Linux utility should you use to change theowner of the war file?

A. chmod

B. fileown

C. chown

D. filemod

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 24Which Linux command will create /data as a symbolic link to the /var/opt/data directory?

A. ln -s /var/opt/data /data

B. slink /var/opt/data /data

C. link -s /data -t /var/opt/data

D. chmod -s /var/opt/data /data

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 25Which statement is true about the Encrypting File System (EFS) feature of Windows Server 2008 R2?

A. Encrypted files cannot be copied to a non-NTFS volume.

B. System files cannot be encrypted with EFS.

C. Files can have both the compression and encrypted attributes checked.

D. Encrypted files moved to a non-encrypted NTFS folder are automatically decrypted.

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 26You are configuring a new Red Hat EL server. As a standard security measure on all of your Linux servers, youdisable the ability to connect directly to the server as the root user using ssh. Which configuration file must youmodify to accomplish this?

A. /etc/ssh.conf

B. /root/.ssh/ssh.conf

C. /var/opt/ssh/sshd_config

D. /etc/ssh/sshd_config

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 27Which Windows Server 2008 R2 feature is capable of encrypting the entire contents of all the disk drives in aserver?

A. Encrypted File System

B. Volume Shadow Copy

C. BitLocker

D. Kerberos Encryption

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 28Management has asked you to consolidate a number of email servers into a virtual environment. Your companyuses only Windows servers. To keep the cost to a minimum, you have decided to use Hyper-V. You are now inthe process of specifying the hardware to purchase for this Hyper-V host. What will be required to supportHyper-V on the new server?

A. It must have an Intel x64-based processor(s).

B. The server must be connected to shared storage for the virtual machine guests.

C. It must support hardware-assisted virtualization (Intel VT or AMD-V).

D. You must install Windows Server 2003 Standard Edition or higher.

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 29You have installed a new Windows Server 2008 R2 server as a virtual machine on a VMware ESX host. It isconfigured to be a file server for a group of users in your building. Users claim that it is much slower than theold file server. The VMware performance graphs show high CPU utilization though Task Manager on theWindows server does not. What is most likely the cause of the performance problems?

A. VMware Tools are not installed on the guest OS.

B. The wrong OS type was selected when the virtual machine was created.

C. The Intel virtualization options are not enabled in the hardware BIOS.

D. The Windows server is configured with a pagefile.sys file that is too large.

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 30You have installed a Windows Server 2008 R2 server as a virtual machine on a Hyper-V host. You arepreparing it for production use as an email server. Time synchronization will be very important for this server.What must you install on the guest OS to synchronize time with the host server?

A. VM Tools

B. Integration Services

C. Hyper-V Time Services

D. the NTP Client feature

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 31Which statement is true about user and group management in a default installation of Red Hat EL server(RHEL)?

A. User passwords are stored in /etc/passwd.

B. UIDs for new users start at 1000.

C. Home directories are automatically created under /usr.

D. Each new user has its own primary group.

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 32You have been given responsibility for a Red Hat EL server that is approximately 3 years old. You are told that itis a standard build of RHEL and is using the standard method of user authentication. You need to remove thelogin accounts of the previous system administrators and make sure there are no back-door login IDs. Whichconsole command will show you the users configured on the system?

A. users --list

B. userinfo -l

C. getent passwd

D. userlist --all

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 33Which local users are created by default in Windows Server 2008 R2? (Select two.)

A. Guest

B. Operator

C. Backup

D. Administrator

E. Supervisor

Answer: AD

Section: (none)

Explanation/Reference:Explanation:

QUESTION 34What is required to install a Windows Server 2008 R2 server into an existing Windows Server 2008 ActiveDirectory domain?

A. a Microsoft (or compatible) DNS server

B. the Enterprise or Data Center edition of Windows Server 2008

C. installation of the Active Directory DS role

D. installation of the Active Directory Member Server feature

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 35You have installed a Red Hat EL server. You have configured it to be a web server for your company intranet.You need to tune the apache service to handle up to 300 connections. Which configuration file should youmodify to accomplish this?

A. httpd.conf

B. apache.conf

C. network.conf

D. services.conf

Answer: A

Section: (none)

Explanation/Reference:

Explanation:

QUESTION 36You have a Windows Server 2008 R2 file server that is accessed by the 500 users in your building. Some usershave complained that searching for files on this server is slow. How can you improve the search speed forthese users?

A. Convert the shared volume to a Dynamic Disk.

B. Increase the size of the pagefile.sys file on the shared volume.

C. Index the shared volume with the Windows Search Service.

D. Add memory to the server and allocate it to the File and Print Sharing Service.

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 37Which programs are capable of installing online updates on a Red Hat EL server? (Select two.)

A. pirut

B. tar

C. rug

D. yum

E. zypper

Answer: AD

Section: (none)

Explanation/Reference:Explanation:

QUESTION 38You are taking over management of a Red Hat EL server. The previous administrator informed you that theyhad never done any system updates on the server. You must configure the server for automatic updates. Whatmust you do to configure this server for automatic updates?

A. Register the server with the Red Hat Network.

B. Run the rhnsd_config command to configure rhnsd.

C. Install the pirut package manager.

D. Run the yum -r rhn.redhat.com command.

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 39

On a Red Hat EL server, where are system logs stored?

A. /log

B. /tmp

C. /etc/log

D. /var/log

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 40A Windows Server 2008 R2 server provides DHCP service for the users in your building. Periodically, userscomplain that they cannot log in. Your investigation determined that they are not getting an IP address from theDHCP server. What should you do to troubleshoot this issue?

A. Restart the server.

B. Boot the server into Safe mode.

C. Look for DHCP errors in the System Event Log.

D. Obtain a packet trace of network traffic.

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 41You manage a Red Hat EL server. You have a cron job on this server that runs the backup each night. Youdiscover that the backup did not run the previous evening. When you check the cron job, you find that a remark(#) has been placed in front of the backup command to prevent it from running. You wonder who might havedone this. Which log file will show you who has logged into this server in the past few weeks?

A. /root/log/sshd

B. /log/sshd

C. /var/log/messages

D. /var/log/secure

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 42You are installing a new Red Hat EL (RHEL) server that will serve as an application server at a remote office.Remote access for system administrators to this server will be very important. Which services available in adefault installation of RHEL will allow remote terminal access to this server? (Select two.)

A. VNC

B. ICA

C. RDP

D. SSHD

E. ALP

Answer: AD

Section: (none)

Explanation/Reference:Explanation:

QUESTION 43What is the default remote access protocol used by Windows Server 2008 R2?

A. VNC

B. RDP

C. HTTP

D. SSH

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 44Your team manages a group of Red Hat EL servers. These servers are configured to not allow the root user toconnect directly over ssh. All system administrators have their own user IDs on each server. They are requiredto log in with their own user ID when they connect remotely. Which command allows root access to the serverswhile connected remotely?

A. rsh

B. X11

C. rlogin

D. sudo

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 45Users are complaining of periodic slowness from the company email server. The email server is a Red Hat ELserver. Knowing that this server has older, Ultra-3 SCSI drives, you suspect the disk drives are not keeping upwith demand from the email application. Which Linux command-line utility can you use to monitor utilization onthe disk channel?

A. pirut

B. devstat

C. iostat

D. lsof

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 46You are assuming administration duties for a Windows Server 2008 R2 server. Having no experience with thisserver you decide to run a System Health Report. How do you access the server utility to generate a SystemHealth Report?

A. Control Panel > Administrative Tools

B. Control Panel > System and Security

C. Start > All Programs > Accessories > System Tools

D. Server Manager > Diagnostics

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 47Which terminal command will launch the GUI utility that can scan a Red Hat EL server's file system and displaydisk usage under each directory on the server?

A. baobab

B. sysmon

C. kudzu

D. nautilus

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 48Which Linux command will launch the Red Hat GUI utility for configuring and tuning a server's networkinterface?

A. ifconfig

B. network-config-gui

C. system-config-network

D. netconfig

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 49You have a Red Hat EL server that is configured as a LAMP server. It supports a PHP web application thatmakes heavy use of a MySQL database. You want to tune the server so that it gives the MySQL programhigher priority than Apache and PHP. Which nice value will give the MySQL process the highest possiblepriority on this server?

A. -20

B. 0

C. +19

D. +40

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 50The help desk reports that the company's project management website is down. The website is an Apache/PHP application running on a Red Hat EL server. You log in to the server console to check the application.Which Linux utility should you use to see if Apache is running on the server?

A. ls

B. modprobe

C. ps

D. sysstat

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 51You manage a Red Hat EL server. For the past week, the Tomcat process on this server has been crashing.This causes your company's website to go down. Red Hat support has asked you to capture information aboutthe crash next time it happens and send it to them for analysis. Which server tool can you use to accomplishthis?

A. syslog

B. debug

C. kdump

D. crashlog

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 52The help desk reports that the company's project management website is down. The website is an Apache/PHP application running on a Red Hat EL server. You log in to the server console to check the application andfind that the httpd process is in a zombie state. What Linux utility will clear the zombie process out of memory?

A. halt

B. kill

C. psclear

D. shutdown

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 53When installing Microsoft Windows Server 2008 R2, which operating system option does not include aGraphical User Interface (GUI)?

A. DataCenter (CLI Installation)

B. Standard (Full Installation)

C. Enterprise (Server Core Installation)

D. Web Server (Minimal Installation)

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 54You are installing Red Hat EL on a new Linux server. The server will provide LAMP services for a webapplication. As part of the LAMP installation, you must compile and install Apache on the server. Whichcommand(s) will perform the compile and install of Apache on the server?

A. rpm -ivh apache_2.2.6.rpm

B. apt-compile apache_2.2.6.rpm

C. configure, make, make install

D. compile, verify, install

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 55You manage a Red Hat EL server that runs several Apache instances. You have Samba configured on theserver to allow website administrators to access the web content. Your company has hired a new webmasterthat needs access to the Samba share of one of the websites. Which Linux utility will set up a Samba user IDfor this new user?

A. smbuser

B. smbuseradd

C. smbpasswd

D. useradd

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 56You have a Red Hat EL server that runs your company's web server. The employee that manages the contentof the website informs you that there is some data on a Windows server that she wants to publish through theweb server. Which software package can you install on the Linux server to make this possible?

A. samba-server

B. winbind

C. samba-client

D. nfs

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 57You manage a Windows Server 2008 R2 server. It is configured as a file server for a group of users in yourbuilding. A user is complaining that she is not able to save files in her home directory. When you try it, you areable to save and delete a file successfully. You need to verify her permissions to that folder. How do you viewthe effective permissions on that folder?

A. Share properties > Advanced > Effective Permissions

B. Computer Management > Share Permissions > Advanced > Effective Permissions

C. Folder properties > Security tab > Advanced > Effective Permissions tab

D. Share properties > Share permissions > Effective Permissions tab

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 58Which statement about Windows Server 2008 R2 is true?

A. All Windows Server 2008 R2 editions require 64-bit hardware.

B. The DataCenter edition supports a maximum of 32TB of RAM.

C. The Web and Standard editions support both 32-bit and 64-bit hardware.

D. The Server Core editions do not support Hyper-V.

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 59Which Linux console command will show whether the architecture of the installed operating system is 32-bit or64-bit?

A. uname -m

B. du-sk

C. modprobe

D. cat /proc/arch

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 60You have a Red Hat EL server running in production as a virtual machine. It runs Apache/Tomcat for an internalweb application. Five additional web server instances are to be added to this server. In preparation for this, youhave added an additional virtual disk to this virtual machine. You need to partition the disk in preparation forformatting it with the XFS file system. Which command line utilities can perform this task? (Select two.)

A. parted

B. partmgr

C. fdisk

D. Disk Druid

E. diskpart

Answer: AC

Section: (none)

Explanation/Reference:Explanation:

QUESTION 61In which log file does a Red Hat EL server record general system events?

A. /boot/boot.log

B. /log/system.log

C. /var/log/messages

D. /var/log/system.log

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 62You have a Windows Server 2008 R2 server. It is a mission-critical server running a CRM application. Younoticed that free space on the C: drive is decreasing and you are concerned that it might impact performance ofthe CRM application if it gets too low. You investigate and find that the event logs are using several hundredmegabytes of space. How can you change the location of the event logs?

A. In Event Viewer, right-click the event log and choose "Properties."

B. In Regedit, change the value of LogLocation in HKLM > SYSTEM > CurrentControlSet > Events.

C. In Administrative Tools > Services, modify the properties of the Event Viewer Service.

D. In Server Manager > System Events, click on "Event Viewer Properties."

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 63You are building a new Windows Server 2008 R2 server to be an Exchange post office server. You know thatperformance on this server will depend mostly on the speed of the disk storage. The hardware for this server isan HP Proliant DL360 G6 with two quad-core processors, 8GB of RAM, and four 300GB 10k SAS drives.Which disk configuration will provide optimal performance with fault tolerance?

A. RAID 0

B. RAID 0+1

C. RAID 5

D. RAID 6

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 64Which Linux command can adjust the speed and duplex of a network interface?

A. ethtool

B. dmesg

C. ifconfig

D. sysconfig

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 65You have a Red Hat EL 5 server that is configured as a LAMP server. It supports a PHP web application thatmakes heavy use of the MySQL database. You want to tune the server so that it gives the MySQL programhigher priority than Apache and PHP. Which Linux utility will show you the priority assigned to the LAMPprocesses?

A. pgrep

B. vmstat

C. sysstat

D. top

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 66You have a Windows Server 2008 R2 server that is not performing as expected. Response at the serverconsole is good but there are no obvious problems that you can see. You suspect high network utilization.Which tools will show you network usage on the server? (Select two.)

A. Event Viewer

B. Control Panel

C. Resource Monitor

D. Server Monitor

E. Task Manager

Answer: CE

Section: (none)

Explanation/Reference:Explanation:

QUESTION 67On a Windows Server 2008 R2 server, what are the two types of permissions that control access to files andfolders on shared volumes? (Select two.)

A. NTFS permissions

B. domain permissions

C. local permissions

D. share permissions

E. group permissions

Answer: AD

Section: (none)

Explanation/Reference:Explanation:

QUESTION 68You manage a Red Hat EL server that provides several web server instances using Apache. The users thatmanage the content of those web servers want direct access to the web content on this server through a driveletter on their Windows workstations. You plan to enable and configure Samba on the server for that purpose.Which file must you modify to configure Samba on this server?

A. /etc/samba.conf

B. /etc/init.d/smb

C. /etc/samba/smb.conf

D. /etc/sysconfig/samba.conf

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 69Which permissions does a folder owner have on a folder on a Windows Server 2008 server?

A. All permissions, except Audit

B. NTFS and Share permissions

C. Full Control, Standard permissions, Special permissions

D. Read, Write, List folder contents, Read & Execute, Modify permissions

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 70You manage a Red Hat EL server for your company. The server provides ftp services for the EngineeringDivision. You have installed a second server in a remote location to serve as a disaster recovery backup to theprimary ftp server. You will use the rsync utility to replicate data from the primary to the backup server. Theremote location is connected through an Internet link. Therefore, you have configured rsync to transfer datasecurely over ssh. However, you are having trouble automating the process because the ssh connection alwaysprompts for a password. How can you resolve this problem?

A. Connect as a non-root user and use sudo to transfer data.

B. Connect to the remote location through a VPN client.

C. Install and use OpenSSH on both servers.

D. Configure ssh key-based authentication.

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 71You have installed a new financial management application on a Windows Server 2008 R2 server for theAccounting Department of your company. You have configured the application correctly according to theinstructions given to you. The accountant that is testing the application says that he has correctly installed andconfigured the client application on his workstation but it cannot connect to the server. What is a possible causeof this problem?

A. The SSL certificate for the server is misconfigured.

B. The DHCP service is not running on the server.

C. The Windows Firewall has not been opened for this application.

D. The server is not a member of a domain.

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 72What is the name of the packet-filtering firewall software package that comes with a standard installation of aRed Hat EL server?

A. TCP Wrappers

B. NetACL

C. IP Tables

D. NetFirewall

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 73You have been given the task of installing a group of ten Red Hat EL servers (RHELs). To make the installationof these and future servers easier, you have decided to set up a network installation server from which you willinstall RHEL. Which network file service must be configured on your network installation server to support theseinstallations?

A. SSH

B. SMB

C. TFTP

D. HTTP

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 74You are performing a standard manual installation of a new Windows Server 2008 R2 server. It has completedthe file copy stage of the installation and you have just set the Administrator password. Now it is displaying theInitial Configuration Tasks dialog. Which tasks should be performed at this point in the installation to preparethe server for production use? (Select two.)

A. configure file shares

B. configure disk storage

C. create users

D. configure networking

E. download and install updates

Answer: DE

Section: (none)

Explanation/Reference:Explanation:

QUESTION 75File download speed on a newly installed Red Hat EL FTP server is slow. You have configured the serverexactly like your other FTP server. CPU and memory utilization are normal. You wonder if the problem is withthe network interface. Which server utility will show you the speed and duplex status of the network interface?

A. ethtool

B. ethstat

C. iostat

D. ifconfig

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 76You have an older, 32-bit Red Hat EL server. You are trying to increase performance of a database applicationrunning on the server. You have added the maximum amount of memory the server will hold. You would like toadd a second swap file on a separate disk to help swap file performance. Which Linux utility can you use todefine the new swap file?

A. init

B. df

C. parted

D. swap

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 77You have a Windows Server 2008 R2 server providing file and print services for the company's administrativestaff. You are planning to consolidate the Finance file server into this Administration file server. You suspect theserver may need more memory to handle the increased load. Which server utilities will show memory and swapfile usage on the server? (Select two.)

A. Resource Monitor

B. Device Manager

C. System Properties

D. Memory Manager

E. Task Manager

Answer: AE

Section: (none)

Explanation/Reference:Explanation:

QUESTION 78You just rebooted your Windows Server 2008 R2 server. Before showing the login prompt, it halts and displaysthe blue screen of death. What is a possible root cause of this problem?

A. A user has saved a corrupt file on the data volume of the server.

B. You recently connected a scanner and installed the associated software.

C. You recently changed the administrator password.

D. The server hardware is over five years old.

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 79You have a Red Hat Enterprise Linux 5 server. The system was inadvertently rebooted. When you view theconsole, a message reads, "Operating system not found." What are possible causes of this message? (Selecttwo.)

A. The network cable is unplugged.

B. A BIOS update was recently installed.

C. A CD was left in the server's CD-ROM drive.

D. The server's boot partition is badly fragmented.

E. The server's master boot record (MBR) has been overwritten.

Answer: CE

Section: (none)

Explanation/Reference:

Explanation:

QUESTION 80You just migrated a Windows Server 2008 R2 server from a physical machine to a virtual machine on aVMware ESX host. You performed the conversion with the VMware Converter utility. When you boot the serveras a virtual machine it boots to a blue screen. What is the likely cause of this problem?

A. The virtual network is not configured correctly.

B. The system disk did not migrate from the physical machine

C. The boot.ini file is configured to boot from the wrong partition.

D. VMware Tools is not installed.

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 81The help desk reports that the company's project management website is down. The website is an Apache/PHP application running on a Red Hat EL server. You log in to the server console to check the application andfind that the httpd process is still running. Which Linux utility will show you the state of the httpd process?

A. lsof

B. top

C. sysstat

D. pgrep

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 82The help desk reports that the company's project management website is down. The website is an Apache/PHP application running on a Red Hat Enterprise Linux 5 server. It is a standard installation of Red Hat'simplementation of Apache/PHP. You log in to the server console and find that the httpd process is in a zombiestate. You clear the zombie process. Which Linux command will restart Apache for this website?

A. /usr/bin/apache

B. kickstart apache

C. service httpd start

D. httpd --start

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 83You received notice that Microsoft just issued a critical security update for IIS on Windows Server 2008 R2. Youmanage a 2008 R2 server running your company's website on IIS. It is critical that you apply this updateimmediately to avoid this security problem on your server. How do you access the server utilities used to initiatean immediate online update on your server? (Select two.)

A. Server Manager > Diagnostics > Windows Updates

B. Control Panel > System and Security > Windows Updates

C. Internet Explorer > Safety Menu > Windows Updates

D. Control Panel > Device Manager > Updates > Windows Updates

E. Server Manager > Configuration > System Updates

Answer: BC

Section: (none)

Explanation/Reference:Explanation:

QUESTION 84You are taking over management of a Red Hat EL server. You suspect that the previous administrator hadnever done any system updates on the server. Which Red Hat Linux console command will determine ifautomatic updates are configured?

A. rhn_check

B. yum --check-updates

C. rhnsd --update

D. pirut -u

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 85When you reboot a Red Hat EL server after installing a kernel update, the server launches an automatic filesystem check. The check takes more than an hour to run. You want to configure the server so that it no longerlaunches the automatic file system check. What configuration file must you edit to accomplish this?

A. /etc/inittab

B. /etc/fstab

C. /etc/init.d/fdisk

D. /boot/grub/menu.lst

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 86

There is a power failure at one of your company's branch offices. A Red Hat EL server operates at that locationto run a critical financial application. Users report that the financial application is not working. When youexamine the server, it appears to be up and running but the financial application is not. Further investigationshows that the volume where the application data resides may be corrupted. Which command will repair thedamaged volume?

A. chkdsk

B. fdisk

C. parted

D. fsck

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 87You manage a Windows Server 2008 R2 server that provides file and print services for users at a remoteoffice. A user at that location reports that all the users in the office are receiving errors when they try to savefiles on the server. You suspect file system problems on that data volume.How do you repair the data volume on this server?

A. Boot the server from a Windows Server 2008 R2 install disk and choose, "repair in place."

B. Boot the server into safe mode and run scandisk /f.

C. Open properties of the data volume > Tools tab > click "Check Now" and then reboot the server.

D. Click Server Manager > Disk Management > Volume Repair.

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 88You are planning the installation of a Red Hat EL server. This server will act as a file server where many userswill store files using Samba. You want to partition the disk in such a way that you will be able to expand the sizeof the file shares in the future if needed. Which Linux utility can you use to do this?

A. smbpart

B. Samba Configurator

C. parted

D. Logical Volume Manager

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 89Which statement describes a Dynamic Disk as it is used in Windows Server 2008 R2?

A. It combines multiple physical disks for redundancy.

B. It is the default disk type on a Windows server.

C. It has three types: Primary, Extended, and Logical.

D. It is used to create volumes that will span multiple hard drives.

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 90You have purchased a new HP Proliant DL380 G7 server to run Red Hat EL and host a MySQLdatabase application. You purchased two 72GB drives for the operating system (OS) and five 300GB drives forthe MySQL database. You are using the default, built-in Smart Array controller. You want to take advantage ofdisk redundancy technologies using either hardware or software RAID technologies. How should you configurethe disks in this server for optimal performance, redundancy and disk space?

A. Use the HP Array Configuration Utility to create a RAID 1 array and logical drive with the 72GB drives and aRAID 5 array and logical drive with the 300GB drives.

B. Use the Red Hat Disk Druid tool to configure a RAID 5 partition for the OS and a RAID 10 partition for thedatabase.

C. Use the Red Hat RAID tools during the anaconda installation to configure a single LVM RAID group for alldisk drives with separate partitions for the OS and the database.

D. Use the HP Array Configuration Utility to create a single, RAID 5 array with all drives and define a small,logical drive for the OS and a large logical drive for the database.

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 91Which Windows Server 2008 R2 tool should you use to install or update hardware drivers?

A. Server Manager

B. System Properties

C. Device Manager

D. Driver Manager

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 92Which Linux console command is used to load a device driver dynamically on a running server?

A. drvrmgr

B. modprobe

C. modload

D. ifmod

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 93You have a Windows Server 2008 R2 server. You have been asked to install an application on the server thatrequires the SMTP Server component of Windows Server 2008 R2. Which server utility should you use to addthe SMTP Server component to this server?

A. Control Panel > System > Server Roles

B. Control Panel > Features > Add Features

C. Server Manager > Features > Add Features

D. Server Manager > Roles > Add Roles

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 94Your Red Hat EL server has a new 10Gig network card. The driver for this card was not included in thestandard distribution source. You downloaded the drivers and compiled them on the server. The newlycompiled driver worked until you installed a kernel update from RHN. Now the server has no networkconnectivity. What must you do to get network connectivity working again?

A. Re-install the rpm for the network drivers.

B. Update the kernel source code to match the kernel update.

C. Boot in rescue mode and run the network repair utility.

D. Re-compile the network drivers.

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 95On a default installation of Red Hat EL server, user passwords are stored in which file?

A. /etc/passwd

B. /etc/hosts

C. /etc/users

D. /etc/shadow

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 96Which Linux utility will create a user and a home directory on a Red Hat EL server?

A. users

B. useradd

C. passwd

D. userhelper

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 97You have installed a new Windows Server 2008 R2 server. In order for all of the system administrators in yourcompany to gain administrative control of this server, you will join the new server to an Active Directory domain.The domain is using the default implementation of group policies and local security policies. How do domainadministrators gain access to the server when it joins the domain?

A. The local security policy on the server automatically grants rights to the Administrators group.

B. A domain security policy grants rights on all computers to the Administrators group.

C. The default group policy adds the Domain Admins group to the local Administrators group.

D. The Enterprise Administration Feature is installed on the server.

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 98You have a Red Hat EL server running in production as an NFS server. Your company's Engineering Divisionuses this server to share CAD data. You want to know how much NFS activity occurs on this server. WhichLinux utility should you use to monitor NFS activity on this server?

A. nfsstat

B. iostat

C. exportfs

D. sysmon

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 99You have been given the task of setting up a Windows Server 2008 R2 server to be an Exchange server.Although you know how to configure Exchange on the server, you are not sure how to tune it so thatperformance will be optimal. Which Windows Server 2008 R2 utility is made specifically to help tuneperformance for Exchange?

A. Hyper-V

B. Best Practices Analyzer

C. PowerShell

D. Windows Role Manager

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 100You have a Windows Server 2008 R2 server that provides file and print services for the users in your building.Users are reporting that they cannot access the server but they can access Internet sites. You check the fileserver and find that all the normal services and shares seem to be up and running but you do not have networkconnectivity to anything. What should you do next to troubleshoot this problem?

A. Restart the Network Service.

B. Use the Network Connection Repair tool.

C. Flush the DNS cache.

D. Replace the network cable.

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 101A friend asks you to help troubleshoot poor performance on his Red Hat EL server. Using an Internet searchtool, you find some forum threads reporting similar symptoms. They recommend updating the network drivers.You are unsure if this server is using the same type of network driver. Which Linux console command willdisplay the network driver being used?

A. modprobe

B. ethtool eth0

C. lsdrvr

D. dmesg | grep eth

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 102You have a Red Hat EL server running in a virtual machine on a VMware ESX host. You just installed VMwareTools on the server. Now the server has no network connectivity to any other network device. The virtualmachine is configured to use the Intel Ethernet interface. What will resolve this problem?

A. Replace the network cables on the host server.

B. Run service network restart.

C. Uninstall VMware Tools.

D. Run modprobe e1000.

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 103You have written a script to run a nightly backup of a Red Hat EL server. You save the script in the /root/bindirectory. You have correctly configured the server to run the script every night at 7:00 pm. However, the scriptdoes not run. What could be the cause of this problem?

A. The root user is not the owner of the script file.

B. The script file is not flagged executable.

C. The contents of the script file are not tagged correctly.

D. The host firewall is not configured to allow this script to run.

Answer: B

Section: (none)

Explanation/Reference:Explanation:

QUESTION 104You have just created a virtual machine on a Hyper-V host server running Windows Server 2008 R2. You areready to install the guest operating system on the virtual machine. Which Windows utility do you use to accessthe server console of the virtual machine?

A. Hyper-V Manager

B. Remote Desktop Connection

C. Virtual Machine Connection Tool

D. Windows Virtual Machine Manager

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 105Which Windows Server 2008 R2 feature provides a point-in-time copy of data located on file shares allowingusers to recover accidentally deleted files?

A. Shadow Copy

B. File Snapshot

C. Offline File Caching

D. Salvage

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 106Your company has a working Windows Server 2008 R2 Active Directory domain. All users in your company login to this Active Directory domain. Some users need to connect to the domain remotely. They have done thisthrough the network VPN service and have often experienced dropped connections when using the VPN. Youwant these users to be able to log in to their Windows desktops securely from a remote location withoutrequiring a VPN connection. What do you need to install or configure to make this possible?

A. the Remote Desktop Web Access role

B. the Terminal Services Connection Broker role

C. the Terminal Services Cryptography feature

D. the Remote Desktop Gateway role

Answer: D

Section: (none)

Explanation/Reference:Explanation:

QUESTION 107You have a new Windows Server 2008 R2 server. A dozen remote users will log in to this server. You need toenable the server to be accessed through a remote desktop connection. What must you install or configure onthis server to allow this?

A. the Terminal Server role

B. the Remote Assistance feature

C. the Remote Desktop Services role

D. permit the RDP protocol in Windows firewall

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 108Which remote access protocol allows graphical applications to be executed on a Linux server but displayedsecurely on a remote desktop?

A. X11

B. SSL

C. HTTPS

D. RDP

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 109What is an advantage of 64-bit over 32-bit architecture?

A. 64-bit computers can address more memory than 32-bit.

B. 32-bit computers are limited to two network interfaces; 64-bit support up to eight.

C. 64-bit computers support virtualization; 32-bit do not.

D. 64-bit computers support power management technology; 32-bit do not.

Answer: A

Section: (none)

Explanation/Reference:Explanation:

QUESTION 110Which statement is true about tuning and optimizing the processor settings for Hyper-V in Windows Server2008 R2?

A. You cannot allocate more than 90% of available CPU to any single virtual machine.

B. Hyper-V logical processors cannot support a guest OS version older than Windows Server 2003.

C. The number of logical processors for a virtual machine is limited to the number of physical processors onthe host.

D. 32-bit guest virtual machines require a 32-bit Hyper-V host.

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 111You have a Red Hat EL server running as a virtual machine on a VMware ESX host. You are about to apply akernel update to the server. You would like to quickly and easily uninstall the update if something goes wrong.Which VMware feature will allow you to easily uninstall the update?

A. Virtual Disk

B. VMware Tools

C. Snapshot

D. System Restore

Answer: C

Section: (none)

Explanation/Reference:Explanation:

QUESTION 112You have just installed a Red Hat EL server. As part of your standard configuration, you need to configure thisserver to send all kernel and authentication log events to a central syslog server. Which configuration file mustyou edit to accomplish this?

A. /var/log/system.conf

B. /etc/syslog.conf.

C. /boot/grub/system.conf

D. /etc/sysconfig/log.conf

Answer: B

Section: (none)

Explanation/Reference:"Pass Any Exam. Any Time." - www.actualtests.com 43


Recommended