HRV / ERVHeat or Energy Recovery

Ventilation Systems

You need fresh air,so does your home.

How they work & type of installationFollowing the energy crisis of the 1970s, we tended to insulate our homes and make them airtight. The result? Our homes are more economical to heat and cool because heat losses and infiltrations are reduced to a minimum. The consequence? Everything produced inside the home remains inside and accumulates. Resulting in the deterioration of indoor air quality.

More and more illnesses are associated with poor indoor air quality. We have only to think of the growing number of asthma and allergy cases. The air we breath is contaminated by all types of gases, dust and bacteria. In addition, we consume oxygen and produce gases and humidity, while not renewing the oxygen consumed.

What Should You Know?

According to the Environmental Protection Agency (EPA), indoor air is anywhere from 2 to 10 times more hazardous than outdoor air. In fact, the EPA warns that the indoor air quality is the number one environmental health problem.

Solvents• Household cleaning materials • Paint • Cosmetics • Glue

Particles• Rugs • Linen • Furniture • Animals

Humidity• Bathroom • Kitchen • Basement

Heat or energy recovery has become essential today, given constantly rising costs and public awareness of our non-renewable resources. Heat or energy recovery systems have been designed to recover the heat or energy contained in exhaust air.

Thanks to a balanced air-flow exchange system, the heat or energy from contaminated exhaust air passes through the recovery core, and fresh air enters through other cells absorbing that heat or energy without mixing with the exhaust air. So you benefit from healthy fresh air while you save on heating or air conditioning costs. A selection of models and controls are offered to suit your needs.

How can you know whether you need a heat or an energy recovery system?

If you use a heating system more often than air conditioning, you need an HRV. If the opposite is the case, an ERV is recommended.

Control Your Indoor Air Quality

Heat or Energy Recovery Ventilators (HRV or ERV)

Fresh air from outside

Heat or Energy recovery core

Exhaust air to outside

Exhaust air from home

ISF 6" (152 mm) dia. collar system

Fresh air to home

Bathroom

Control

Forced air system

HRV/ERV

Exhaust air hood

Fresh air supply hood

Exhaust and supply in the return

Good

Bathroom

Control

Forced air system

HRV/ERV

Exhaust air hood

Fresh air supply hood

Exhaust at the source and supply in the return

Better

Bathroom

Control

HRV/ERV

Exhaust air hood

Fresh air supply hood

Independent system

Best

Climate Conditions Extreme

Heat Recovery Ventilator Required

Moderate Heat Recovery Ventilator Recommended

Pacific & Dry Heat Recovery Ventilator Recommended

Energy Recovery Ventilator Optional

Hot & Humid Energy Recovery Ventilator Recommended

HRV*: A residential heat recovery ventilator uses separate motors to exhaust stale ambient air and to introduce fresh outdoor air. The technology of a plate heat recovery core is that it transfers warm ambient air from one airstream to the other without mixing the air streams for maximum efficiency and comfort.

*Application ideal for cold climates.

ERV*: A residential energy recovery ventilator uses separate motors to exhaust stale ambient air and to introduce fresh outdoor air. The technology of a plate energy recovery core is that it transfers latent energy (humidity) & heat from one airstream to the other without mixing the airstreams for maximum efficiency and comfort.

*Application ideal for warm humid climates.

Fresh air

Exhaust air

PH 7.15

SPM attachment systemThe Greentek HRV/ERV products are designed for installation by a single person. “Single Person Mounting” will enable you to save time and effort by offering you a variable attachment system.

High Performance Engineered MotorsAll Greentek products are designed with high-performance and reliable motors for your comfort and peace of mind. Factory sealed and dynamically balanced, our motors are maintenance-free for years to come.

The polypropylene HRV CoreDesigned to maximize airflow and performance. The core is constructed from a composite of polypropylene materials that allows latent heat transfer from one airstream to another while preventing cross-contamination

Balancing Pressure TapsQuick and easy integrated balancing pressure taps located in the access door allows for accurate readings and maximizing your balanced ventilation requirements.

DuoTrol balancing systemSilent and economical... By reducing motor speed to balance the unit, you avoid the noise that would be produced by balancing dampers. In addition, with this technology the unit will consume less energy.

ISF Revolutionary Collar System(Patent Pending)

Quick and simple to install thanks to our revolutionary “Insert Slide and Fix” collar system. The “ISF” collar system enables you to manipulate duct within your reach and then insert by sliding it in place, for a better and quicker installation.

The dpoint ERV Core Advanced Heat and Humidity Exchanger superior to existing paper based cores, dpoint’s washable ERV Core is manufactured from a durable polymer membrane.Antimicrobial protection, which inhibits the growth of mold and odor causing bacteria on the membrane.

The entire line of Greentek Heat Recovery Ventilators (HRV) & Energy Recovery Ventilators (ERV) offer features and benefits that are revolutionary . Backed by the best warranty in the market, they are not only reliable & efficient, they allow peace of mind and comfort for years to come.

Features & Benefits of the Greentek System

Solace XPH Series HRVFeatures• ENERGY STAR® rated Heat Recovery Ventilator

• 4 operating modes (ECONO**, INTERMITTENT, CONTINUOUS and HIGH SPEED)

• Quick & simple installation

• Slim compact design

• Integrated door pressure balancing taps

• Lifetime limited warranty on the heat recovery core

• 5-year limited warranty on all other components

Model Airflow ISFTM Port Variable Motor Dimensions Adjusted Sensible Recovery Weight HRV Performance Collar System Location Speed Warranty (H x W x D) Efficiency ASRE% @ 0º C (Approx.)

XPH 1.5* 30-150 CFM 6" Round Dia. Side 10 years 211⁄2"x 237⁄8"x 113⁄8" 76 % 49 lbs (22.2 Kg) (14 L/s-71 L/s) (152 mm) 54.6 cm x 60.6 cm x 28.9 cm

XPH 2.0* 50-250 CFM 6" Round Dia. Side 10 years 211⁄2"x 237⁄8"x 161⁄2" 82 % 59 lbs (26.8 Kg) (24 L/s-118 L/s) (152 mm) 54.6 cm x 60.6 cm x 41.9 cm

*This product earned the ENERGY STAR® by meeting strict energy efficiency guidelines set by Natural Resources Canada and the US EPA. It meets ENERGY STAR® requirements only when used in Canada.** Econo ventilation mode offered when Vectra Series wall controls model EHC1.0TC or EHC1.5DC are connected to system.

XDH 7.15 HRVFeatures• Advanced 5TH port recirculatin damper design

• 5 operating modes (ECONO**, INTERMITTENT, CONTINUOUS, RECIRCULATION and HIGH SPEED)

• Offers flexibility with multiple operating modes

• Integrated door pressure balancing taps

• Lifetime limited warranty on the heat recovery core

• 5-year limited warranty on all other components

Model Airflow ISFTM Port Variable Motor Dimensions Adjusted Sensible Recovery Weight HRV Performance Collar System Location Speed Warranty (H x W x D) Efficiency ASRE% @ 0º C (Approx.)

XDH 7.15* 30-150 CFM 6" Round Dia. Side 10 years 211⁄2"x 313 ⁄4"x 113⁄8" 76 % 56 lbs (25 Kg) (14 L/s-71 L/s) (152 mm) 54.6 cm x 80.6 cm x 28.9 cm

*This model offers a recirculating mode that enables warm ambient air to be distributed throughout your home. *This product earned the ENERGY STAR® by meeting strict energy efficiency guidelines set by Natural Resources Canada and the US EPA. It meets ENERGY STAR® requirements only when used in Canada.** Econo ventilation mode offered when Vectra Series wall controls model EHC1.0TC or EHC1.5DC are connected to system.

C3.14 HRVFeatures• 5 operating modes (ECONO**, INTERMITTENT, CONTINUOUS, RECIRCULATION

and HIGH SPEED)

• Compact design for tight spaces

• Silent & economical

• Damper defrost sequence with recirculation

• Integrated door pressure balancing taps

• Lifetime limited warranty on the heat recovery core

• 5-year limited warranty on all other components

Model Airflow Collar Port Variable Motor Dimensions Adjusted Sensible Recovery Weight HRV Performance System Location Speed Warranty (H x W x D) Efficiency ASRE% @ 0º C (Approx.)

C3.14* 30-140 CFM 5" Oval Dia. Top 5 years 23 3 ⁄32"x 1713 ⁄32"x 15 51 ⁄64" 82 % 45.5 lbs (20.6 Kg) (14 L/s-66 L/s) (125 mm) 58.7 cm x 44.2 cm x 40.1 cm

*This product earned the ENERGY STAR® by meeting strict energy efficiency guidelines set by Natural Resources Canada and the US EPA. It meets ENERGY STAR® requirements only when used in Canada.** Econo ventilation mode offered when Vectra Series wall controls model EHC1.0TC or EHC1.5DC are connected to system.

PH 7.15 ES & 10.22 ES HRVFeatures• ENERGY STAR® rated Heat Recovery Ventilator

• 4 operating modes (ECONO**, INTERMITTENT, CONTINUOUS and HIGH SPEED)

• Quick & simple installation

• Integrated door pressure balancing taps

• Slim compact design

• Lifetime limited warranty on the heat recovery core

• 5-year limited warranty on all other components

Model Airflow ISFTM Port Variable Motor Dimensions Adjusted Sensible Recovery Weight HRV Performance Collar System Location Speed Warranty (H x W x D) Efficiency ASRE% @ 0º C (Approx.)

PH 7.15 ES* 30-150 CFM 6" Round Dia. Side 10 years 211⁄2"x 237⁄8"x 113⁄8" 76 % 49 lbs (22.2 Kg) (14 L/s-71 L/s) (152 mm) 54.6 cm x 60.6 cm x 28.9 cm

PH 10.22 ES* 50-220 CFM 6" Round Dia. Side 10 years 211⁄2"x 237⁄8"x 161⁄2" 82 % 59 lbs (26.8 Kg) (24 L/s-104 L/s) (152 mm) 54.6 cm x 60.6 cm x 41.9 cm

*This product earned the ENERGY STAR® by meeting strict energy efficiency guidelines set by Natural Resources Canada and the US EPA. It meets ENERGY STAR® requirements only when used in Canada.** Econo ventilation mode offered when Vectra Series wall controls model EHC1.0TC or EHC1.5DC are connected to system.

LCH-Series Light Commercial Horizontal HRV/ERVFeatures• 3 operating modes (INTERMITTENT, CONTINUOUS and HIGH SPEED)

• Modular cross-flow HRV or ERV core technology.

• 15-year limited warranty on the heat recovery core

• 3-year limited warranty on the energy recovery core

• 2-year limited warranty on ventilation motors

Model Airflow Port Core Duct Dimensions Weight HRV/ERV Performance Location Type Dimensions (H x W x D) (Approx.)

LCH-4H 200-450 (94 L/s-212 L/s) Side Aluminum 8" x 14" (203.2 mm x 355.6 mm) 29.4" x 35.9" x 22.7" (747 mm x 911 mm x 577 mm) 146 lbs (66 Kg)

LCH-4E 200-450 (94 L/s-212 L/s) Side Enthalpic 8" x 14" (203.2 mm x 355.6 mm) 29.4" x 35.9" x 22.7" (747 mm x 911 mm x 577 mm) 132 lbs (60 Kg)

LCH-7H 500-750 (236 L/s-354 L/s) Side Aluminum 8" x 14" (203.2 mm x 355.6 mm) 36.5" x 36.2" x 22" (929 mm x 920 mm x 559 mm) 185 lbs (84 Kg)

LCH-7E 500-750 (236 L/s-354 L/s) Side Enthalpic 8" x 14" (203.2 mm x 355.6 mm) 36.5" x 36.2" x 22" (929 mm x 920 mm x 559 mm) 169 lbs (77 Kg)

LCH-12H 1200 (566 L/s) Side Aluminum 8" x 20" (203.2 mm x 508 mm) 51.6" x 36.2" x 22" (1310 mm x 920 mm x 559 mm) 252 lbs (114.5 Kg)

LCH-12E 1200 (566 L/s) Side Enthalpic 8" x 20" (203.2 mm x 508 mm) 51.6" x 36.2" x 22" (1310 mm x 920 mm x 559 mm) 232 lbs (105 Kg)

PH 7.15 & 10.22 HRVFeatures• 4 operating modes (ECONO**, INTERMITTENT, CONTINUOUS and HIGH SPEED)

• The professional residential series

• Quick & simple installation

• Integrated door pressure balancing taps

• Slim compact design

• Lifetime limited warranty on the heat recovery core

• 5-year limited warranty on all other components

Model Airflow ISFTM Port Variable Motor Dimensions Adjusted Sensible Recovery Weight HRV Performance Collar System Location Speed Warranty (H x W x D) Efficiency ASRE% @ 0º C (Approx.)

PH 7.15 30-160 CFM 6" Round Dia. Side 10 years 211⁄2"x 237⁄8"x 113⁄8" 73 % 48.5 lbs (22 Kg) (14 L/s-76 L/s) (152 mm) 54.6 cm x 60.6 cm x 28.9 cm

PH 10.22 50-220 CFM 6" Round Dia. Side 10 years 211⁄2"x 237⁄8"x 161⁄2" 82 % 58.5 lbs (26.5 Kg) (24 L/s-104 L/s) (152 mm) 54.6 cm x 60.6 cm x 41.9 cm

** Econo ventilation mode offered when Vectra Series wall controls model EHC1.0TC or EHC1.5DC are connected to system.

PE 7.15 & 10.22 ERVFeatures• 4 operating modes (ECONO**, INTERMITTENT, CONTINUOUS and HIGH SPEED)

• Revolutionary ERV Technology

• Water washable membrane allows the core to be cleaned thoroughly

• Integrated door pressure balancing taps

• Advanced polymer membrane

• 5-year limited warranty on the energy recovery core

• 5-year limited warranty on all other components

Model Airflow ISFTM Port Variable Motor Dimensions Adjusted Sensible Recovery Weight ERV Performance Collar System Location Speed Warranty (H x W x D) Efficiency ASRE% @ 0º C (Approx.)

PE 7.15 30-160 CFM 6" Round Dia. Side 10 years 211⁄2"x 237⁄8"x 113⁄8" 73 % 47.5 lbs (21.5 Kg) (14 L/s-76 L/s) (152 mm) 54.6 cm x 60.6 cm x 28.9 cm

PE 10.22 70-220 CFM 6" Round Dia. Side 10 years 211⁄2"x 237⁄8"x 161⁄2" 77 % 57.5 lbs (26.1 Kg) (33 L/s-104 L/s) (152 mm) 54.6 cm x 60.6 cm x 41.9 cm

** Econo ventilation mode offered when Vectra Series wall controls model EHC1.0TC or EHC1.5DC are connected to system.

* Available for the US market** Econo ventilation mode offered when Vectra Series wall controls model EHC1.0TC or EHC1.5DC are connected to system.

SS 3.80 FSD HRV/ERVFeatures• 4 operating modes (ECONO**, INTERMITTENT, CONTINUOUS and HIGH SPEED)

• Designed specific for condos, apartments and small homes

• Energy efficient & Ultra-quiet

• Lifetime limited warranty on the heat recovery core

• 5-year limited warranty on the energy recovery core

• 5-year limited warranty on all other components

Model Airflow ISFTM Port Variable Motor Dimensions Adjusted Sensible Recovery Weight HRV/ERV Performance Collar System Location Speed Warranty (H x W x D) Efficiency ASRE% @ 0º C (Approx.)

SS 3.80* 30-100 CFM 5" Oval Dia. Top 5 years 18"x 20"x 141⁄2" 74 % 41 lbs (18.6 Kg) HRV (14 L/s-47 L/s) (127 mm) 45.7 cm x 50.8 cm x 36.8 cm

SS 3.80* 30-100 CFM 5" Oval Dia. Top 5 years 18"x 20"x 141⁄2" 70 % 40 lbs (18.1 Kg) ERV (14 L/s-47 L/s) (127 mm) 45.7 cm x 50.8 cm x 36.8 cm

OPTIONAL WALL CONTROLS - HRV/ERV QUALITY ACCESSORIES for optimal performance of your HRV/ERV system

RD-1 modelTM Features• Dehumidistat to select the humidity level• Compatible with all models

RD-2 modelTM Features• Dehumidistat to select the humidity level• Speed Control (Off, Normal and Reduced)• Light On / Override Indicator• Compatible with all models

RD-3P modelTM PROFESSIONAL

Features• Dehumidistat to select the humidity level• Speed Control (Off, Normal and Reduced)• Mode Control (Intermittent and Continuous)• Light On/Override Indicator• Compatible with all models

RD-3D modelTM DEHUMIDISTAT DELUXE

Added Features• Mode Control (Intermittent, Recirculation and Continuous)• Compatible with the model XDH and the SS3.12DD

Series only

RD-4P modelTM PROFESSIONAL

Features• Dehumidistat to select the humidity level• Speed Control (Off, Normal and Reduced)• Mode Control (Intermittent and Continuous)• Cycles per hour (0/0, 20/40 and 30/30)• Light On/Override Indicator• Maintenance Light Reminder• Compatible with all models

RD-4D modelTM DEHUMIDISTAT DELUXE Added Features• Mode Control (Intermittent, Recirculation and Continuous)• Compatible with the model XDH and the SS3.12DD

Series only

VECTRA EHC 1.5 DC modelTM

Features• Friendly Energy Savings Mode• Programmable digital control• High contrast LCD Display backlight• LCD interface provides instant system feedback• Stylish Decora® design• Compatible with all models

VECTRA EHC 1.0 TC modelTM

Features• Friendly Energy Savings Mode• Simple user interface (no programming)• LED provides instant system feedback• Stylish Decora® design• Blends perfectly with any decor• Compatible with all models

T-3 modelTM

Push-button TIMER20 /40 /60 minutes

Features• Offers 20/40 or 60 minutes at maximum ventilation

capacity.• Compatible with all models

Programmable ventilation control with 12 operating modes to choose from. Entry level ventilation control with 7 operating modes to choose from.

The T-3 allows high speed ventilation for 20, 40 or 60 Minutes.

The RD-3P and RD-3D models™ allows the selection of humidity percentage, fan range and operation modes.

The RD-4P and RD-4D models™ allows the selection of humidity percentage, fan range, operation modes and cycles per hour.

The RD-2 modelTM allows the homeowner to select the humidity percentage and fan range.The RD-1 modelTM allows the homeowner to select the humidity percentage.

Features• Single port 71⁄16"x 81⁄16" (179 mm x 205 mm)

to exterior wall• Simple & easy to install• Oval 6" (152 mm) dia. connections• Ideal for HRV or ERV• Residential or condo applications• Screen design prevents birds & rodents

from entering• 100% U.V. Resistant

Features• For general purpose venting • Designed for maximum airflow• Built-in pest guard • UV resistant paintable plastic• Supply & Exhaust applications• Available in 3" (76.2 mm), 4" (101.6 mm),

5" (127 mm), 6" (152 mm) and 7" (177.8 mm) • Available in white, brown and black

Features• Decorative style• Available in 4"/5" (101.6 mm/127 mm) 5"/6" (127 mm/152 mm)• Ajustable airflow settings• Supply and exhaust applications

Premium Intake & Exhaust Hood with Metal Screen

Hush-Grill Round Air diffuser

The matrixTM 2 in 1 Single Port Ventilation Hood

Features• Ultra-quiet operation• Whole House HEPA Filtration System• 99.97% HEPA certified & tested media• 2 operating speeds (200 or 300 cfm)• 10-year limited warranty on motor• 5-year limited warranty on all other components• Plenum or duct mount• Dimensions 22"x 17"x 13"

(55.9 cm x 43.2 cm x 33 cm)

Features• 22 ga. Pre-painted fully insulated cabinet.• Round duct connections 6" (152 mm) dia. ISF Collar.• Hinged sealed door for easy maintenance.• Classified cULus Class 2 MERV 8 filter.• Dimensions 13"x 141⁄4"x 19"

(33 cm x 36.2 cm x 48.3 cm)

HEPA HS 3.0 IFB6 PF & IFB6 PCF (Inline Filter Box)

CE

RT

IFIED AND TESTED

ME

DIAHEPA

99.97%

CE

RT

IFIE

D AND TESTED M

ED

IAHEPA99.97%

VENTILATION

PREF

ECONO

VENT

20 MIN/HR

OFF

ON/OFF

VENTRECIRC20 MIN/HR

SUMMER/ÉTÉ

8 8%

MEDMIN

MAX

VENTILATION

PREF

ECONO

VENT

20 MIN/HR

OFF

ON/OFF

VENTRECIRC20 MIN/HR

SUMMER/ÉTÉ

8 8%

MEDMIN

MAX

GTDMK• Recirculation by-pass damper module kit• Available in 8" x 14" (203.2 mm x 356 mm) 8" x 20" (203.2 mm x 508 mm)• Simple & easy to install• High performance 24V actuator

LCH Series Accessories

GTPDK• Outdoor air prevention damper kit• Available in 8" x 14" (203.2 mm x 356 mm) 8" x 20" (203.2 mm x 508 mm)• Simple and easy to install• High performance 24V actuator

`

HRV / ERVHeat or Energy Recovery

Ventilation Systems

Greentek50 Kanalflakt Way, Bouctouche, NB Canada, E4S 3M5Toll free: (888) 724-5211 Fax: (866) 426-7430 Visit us at: www.greentek.ca

Greentek reserves the right to modify a product, without prior notice, whether in design, colour or specifications, in order to offer at all times a quality product that is highly competitive. Please consult your national and local building codes to find out whether the installation of electrical products requires the services of a certified technician or electrician. Greentek® is a registered Trademark used under license by Systemair Inc. All rights reserved.

You can find Greentek Indoor Air Quality products at the following distributor:

E610

0 A

PRIL

2019