2
Tel: +44(0) 845 680 1957Fax: +44(0) 845 680 1958Email: [email protected]: www.hansfordsensors.com
Operating Temperature RangeSealingMaximum ShockEmissionsImmunity
-25 to 90 ºCIP675000 gEN61000-6-4:2001EN61000-6-2:1999
Case MaterialSensing Element/ConstructionMounting TorqueWeightMaximum Cable lengthMating Connector/Cable Assembly
Mounting ThreadsOptions
Low cost on-line means of monitoringwith the capability of interfacing directinto PLC, BMS or any 4-20mA inputmodule.Proven use in vibration monitoring foroffline applications using commerciallyavailable data collectors.
Protecting...Fans, Motors, Pumps, Compressors,Centrifuges, Conveyers, Air Handlers,Gearboxes, Rolls, Dryers, Presses,Cooling, HVAC, Spindles, Machine Tooling,Process Equipment and many more.
Stainless SteelPZT/Compression8 Nm150 gms (nom)1000 metresM12 - Straight or Right AngleRequires screened cable assemblySee 'How to order' table Ranges, connector, other cable lengths,intrinsically safe,
Mounted Base ResonanceVelocity Ranges
Frequency ResponseIsolationMeasurement RangeTemperature OutputTransverse SensitivityElectrical
5 kHz min.0-10 to 0-100 mm/sec RMS ± 10%Nominal 80 Hz at 22°C10 Hz to 1 kHz ±5 % - ISO10816Base isolated50 g peak10 mV/ºCLess than 5%
Typical Applications
HS-420T Series Vibration SensorM12 Connector, Dual Output - 4-20mA and Temperature
Technical Performance
Environmental
Mechanical
Outputs - Velocity - Temperature
Supply VoltageSettling TimeOutput ImpedanceCase Isolation
4-20 mA DC proportional to RMS Velocity Range0-1 V proportional to 0-100°C(To convert this to 4-20 mA, use HS-540 Module)15 - 30 Volts DC (for 4-20 mA)2 secondsLoop Resistance 600 Ohms max. at 24 Volts>10 Ohms at 500 Volts8
HS-420T Series Vibration Sensor
Frequency Response
Tel: +44(0) 845 680 1957Fax: +44(0) 845 680 1958Email: [email protected]: www.hansfordsensors.com
Ref: HS420TM12-1208
Mounting of sensor to achieve good repeatable readings.Vibration sensor should be firmly fixed to a flat surface (spotface surface may be needed to be produced and cable anchoredto sensor body.)
TS028 Iss4
How to order
Please contact our Sales Office for information on sensor accessories (mounting studs, etc) and multichannel switch boxes.
We reserve the right to alter the specification of this product without prior notice.
Dimensions
