HTC 270 EG
HTC 650 RX
HTC 420 VS
HTC 800 HDX HTC 800 RX
HTC 500
HTC 950 RX
HTC 650 E Classic
HTC 1500 ixT
HTC 80 iD II
HTC 650 HDX
HTC 800 Classic
2,2 kW
11 kW
2,2 kW
15 kW 15 kW
4 kW
15 kW
7,5 kW 11 kW
11 kW
2 x 11 kW
1 x 230 V, 10 A
3 x 400 V, 25 A
3 x 460 V, 16 A
3 x 460 V, 25 A
3 x 400 V, 16 A
3 x 460 V, 32 A 3 x 460 V, 32 A
3 x 460 V, 16 A 3 x 460 V, 25 A
3 x 460 V, 25 A
400 V, 63 A
3 x 400 V, 16 A
3 x 400 V, 32 A
1 x 230 V, 10 A
1 x 115 V, 20 A
3 x 400 V, 32 A 3 x 400 V, 32 A
3 x 400 V, 16 A 3 x 400 V, 25 A
3 x 400 V, 25 A
3 x 230 V, 16 A103 kg
455 kg
94 kg
510 kg 565 kg
147 kg
600 kg
320 kg 365 kg
440 kg
1900 kg
270 mm
650 mm
420 mm
800 mm 800 mm
500 mm
920 mm
650 mm 800 mm
650 mm
1450 mm
7,5 kW
3 x 460 V3 x 400 V
272 kg
700 m³/h
HTC’s grinding machines have unique benefits that makes your everyday life as grinding contractor easier. See below some innovations that make a difference.For more information om about a specific machine model and the features of each machine, please visit; www.htc-floorsystems.com.
Radio controlThe radio control provides a significantly simplified handling of the machine during grinding and transportation. It also makes it possible to grind for a long period of time without a break.
4 head grinder (X model)With a 4 head grinder you get an up to 30% more effective grinding and stripping and obviously a more level floor. In addition, a machine with four grinding heads runs smoother which makes the handling more ergonomic.
Outstanding qualityHTC’s high quality means that HTC as the only company in the industry can offer a 2 year warranty* on the complete machine range.
Flexible and floating grinding coverA grinding cover that follows the floor together with a dust extractor prevents the spread of dust in the floor. HTC’s flexible grinding covers let you grind very close to corners and edges without damaging the walls etc.
MCS™ (Mist Cooler System)A small detail that makes a huge difference. A thin mist is sprayed over the floor preventing the metal tools to overheat. This significantly increase the machines stripping capacity. Up to 100% better removal rate is achieved.
EZchange™The HTC developed tool change system is quick, simple and safe. One tooling system for all HTC’s grinding machines. The only thing needed when changing tools is a rubber/plastic hammer.
Good working environmentHTC’s machines are perfectly balanced during grinding without any sideway forces and with vibration levels much lower than the threshold values. The sound levels are very low, and grinding is made more or less dust free.
The complete range of diamond floor grindersHTC’s floor polishing and grinding machines are appreciated by thousands of customers all over the world. The diamond floor grinders are available in several different sizes and versions depending on your needs and demands. As the leading manufacturer and supplier of floor grinding equipment we have the largest range of products. Our floor grinders cover everything from edges to huge areas of thousands of square meters and are suitable for floor preparation, grinding and polishing of for example natural stone, concrete and wooden floors.
HTCProfessional Floor SystemsGrinding machines
Innovations that make a difference
Model Art no.
1 x 230V 50 HZ EU 501054
1 x 230V 60 HZ US 113256
3 x 460V US 113325
Model Art no.
3 x 400V 50 HZ EU, Mist cooler 111566
3 x 460V US, Mist cooler 111565
Model Art no.
3 x 400V 50 HZ EU, Mist cooler 111570
3 x 460V US, Mist cooler 111571
Model Art no.
3 x 400V 50 HZ EU, Mist cooler 111569
3 x 460V US, Mist cooler 111568
Model Art no.
3 x 400V 50 HZ EU, Mist cooler 113481
3 x 400V US, Mist cooler 113430
Model Art no
3 x 400V 50 HZ EU 112947
3 x 460V US 112964
Model Art no
1 x 230V 50 HZ EU 112131
3 x 400V 60 HZ EU 112210
1 x 115V US 112132
Model Art no.
3 x 230V 50/60 HZ EU 111228
3 x 230V 50/60 HZ US 111298
Model Art no.
3 x 400V 50 HZ EU 111766
3 x 460V US 112087
Model Art no.
3 x 400V 50 HZ EU 111562
3 x 460V 60 HZ US 111601
www.htc-floorsystems.com
* Does not apply on HTC 2500 iX, HTC 1500 ixT and the Greyline-series.
Model Art no
HTC 1500 ixT 112457
Model Art no
HTC 80 iD II, EU 113753
HTC 80 iD II, US 113739
© 2011 H
TC S
wed
en AB
, All rights reserved
.
NEW!
RAVAGER &
T-REX
series
Grinding and polishing of screed products
Concrete grinding
Natural stone & terrazzoEdge grinding tools
HTC 420 tools
Wood grinding tools
M-seriesS-series
X-series
H-series
HTC - Original Diamond toolsBased upon substantial research and development, testing and experience, HTC produces a unique range of diamond tools to cover all the different type of procedures possible with the HTC diamond grinders. There are diamond tools suitable for anything from very rough grinding equal to scarifying to high gloss polishing of natural stone or concrete. Each tool has an explanation of its primary application.Please read more at www.htc-floorsystems.com
EZchange™ - easy and quick tool change on all HTC machines.
EZchange™ - The Instant tool change system is so ingeniously simple! No more jammed, rusted or broken screws, in fact, no screws at all! Place the tools in the compartment on the holder and with a light tap using a rubber hammer you’re ready for grinding, polishing or removal of coverings.
EZstart™ – only with HTC!
EZstart™ - a small detail that makes the difference.The grooved surface makes it easier for the tool to open and achieve maximum cutting capacity from the start. The grinding operation becomes more effective and delivers better results in less time.
Fenix II Art no. Floor type
Fenix II 7 Red (5”) 212447-7 (7”) 212448-7 (9”) 212449-7 (11”) 212450-7
Screedproducts
Fenix II 8 White (5”) 212447-8 (7”) 212448-8 (9”) 212449-8 (11”) 212450-8
Screedproducts
Fenix II 9 Yellow
(5”) 212447-9 (7”) 212448-9 (9”) 212449-9 (11”) 212450-9
Screedproducts
Fenix II 10 Green
(5”) 212447-10 (7”) 212448-10(9”) 212449-10 (11”) 212450-10
Screedproducts
Fenix II Art no. Floor type
Fenix II 3 Grey (5”) 212447-3 (7”) 212448-3(9”) 212449-3(11”) 212450-3
Screedproducts
Fenix II 4 Brown
(5”) 212447-4 (7”) 212448-4(9”) 212449-4 (11”) 212450-4
Screedproducts
Fenix II 5 Black (5”) 212447-5 (7”) 212448-5(9”) 212449-5 (11”) 212450-5
Screedproducts
Fenix II 6 Blue (5”) 212447-6 (7”) 212448-6 (9”) 212449-6 (11”) 212450-6
Screedproducts
Diamond Xpress Art nr. Floor type
DX 3 Grey 212981-3 (180)212795-3 (230)212796-3 (270)
Marble, terrazzo, limestone, concrete
DX 4 Brown 212981-4 (180)212795-4 (230)212796-4 (270)
Marble, terrazzo, limestone, concrete
DX 5 Black 212981-5 (180)212795-5 (230)212796-5 (270)
Marble, terrazzo, limestone, concrete
DX 6 Blue 212981-6 (180)212795-6 (230)212796-6 (270)
Marble, terrazzo, limestone, concrete
DX 7 Red 212981-7 (180)212795-7 (230)212796-7 (270)
Marble, terrazzo, limestone, concrete
DX 8 White 212981-8 (180)212795-8 (230)212796-8 (270)
Marble, terrazzo, limestone, concrete
DX 9 Yellow 212981-9 (180)212795-9 (230)212796-9 (270)
Marble, terrazzo, limestone, concrete
DX 10 Green 212981-10 (180)212795-10 (230)212796-10 (270)
Marble, terrazzo, limestone, concrete
EZgrind Art no.
EZgrind Ø 130 Grey 40 211964
EZgrind Ø 130 Brown 60 211938
EZgrind Ø 130 Black 100 211942
EZgrind Ø 130 Blue 200 211943
EZgrind Ø 130 Red 400 211944
EZgrind Ø 130 White 800 211945
Cup grinding wheelsfor handheld machines
Art no.
T-Rex® cup wheel 213016 (125 mm)213017 (175 mm)
Gold 212505 (125 mm) 212510 (180 mm)
Brown 212506 (125 mm)
Black 212507 (125 mm)
Blue 212508 (125 mm)
Red 212509 (125 mm)
Wood grinding tools Art no..
EZ SL 30 Wood 212186
EZ SL 50 Wood 212187
EZ SL 70 Wood 212343
Sanding paper 180mm - 11955 (40) 11956 (60) 11957 (80) 11958 (100) 11959 (120)230mm - 11961 (40) 11960 (60) 11962 (80) 11963 (100) 11964 (120)
Wood grinding tools Art no.
Elastic tool holder EZ 180 3
112794
Tool holder wood sanding HTC 420
212231
Foamflex for wood sanding
211045
Pad holder 212243
Oil pad HTC 420 212010
FP/REP Art no. Floor type
EZ FP 10 Black 211494 Granite
EZ FP 20 Blue 211495 Granite
EZ FP 30 Red 211496 Granite
EZ FP 40 White 211497 Granite
EZ FP 50 Yellow 211498 Granite
EZ FP 60 Green 211499 Granite
EZ REP 00 Brown 211440 Marble, Limes., Terrazzo
EZ REP 01 Black 211441 Marble, Limes., Terrazzo
EZ REP 02 Blue 211439 Marble, Limes., Terrazzo
EZ REP 03 Red 211442 Marble, Limes., Terrazzo
EZ REP 04 White 211445 Marble, Limes., Terrazzo
EZ REP 05 Yellow 211443 Marble, Limes., Terrazzo
EZ REP 06 Green 211444 Marble, Limes., Terrazzo
BBX/BB/SR Art no. Floor type
EZ BBX 2 Gold 212852 Concrete
EZ BB 3 Grey 212042 Concrete
EZ BB 4 Brown 212043 Concrete
EZ BB 5 Black 212044 Concrete
EZ BB 6 Blue 212045 Concrete
EZ BB 7 Red 212046 Concrete
EZ BB 8 White 212047 Concrete
EZ SR 3 Grey 212360 Concrete
EZ SR 4 Brown 212361 Concrete
EZ SR 5 Black 212362 Concrete
EZ SR 6 Blue 212363 Concrete
EZ SR 7 Red 212364 Concrete
EZ SR 8 White 212365 Concrete
EZ SR 9 Yellow 212366 Concrete
EZ S2 Gold
213049-2 (DS)213050-2 (SS)
EZ S3 Grey
213049-3 (DS)213050-3 (SS)
EZ S4 Brown
213049-4 (DS)
EZ S5 Black
213049-5 (DS)
EZ M0Lilac
213055-0 (DS)213056-0 (SS)
EZ M1Silver
213055-1 (DS)213056-1 (SS)
EZ M2 Gold
213055-2 (DS)213056-2 (SS)
EZ M3 Grey
213055-3 (DS)213056-3 (SS)
EZ M4 Brown
213055-4 (DS)213056-4 (SS)
EZ M5 Black
213055-5 (DS)213056-5 (SS)
EZ H0Lilac
212977-0 (DS) 212978-0 (SS)
EZ H1Silver
212977-1 (DS) 212978-1 (SS
EZ H2 Gold
212977-2 (DS) 212978-2 (SS)
EZ H3 Grey
212977-3 (DS) 212978-3 (SS)
EZ H4 Brown
212977-4 (DS)212978-4 (SS)
EZ H5 Black
212977-5 (DS)212978-5 (SS)
EZ X2 Gold
213036-2 (DS) 213037-2 (SS)
EZ X3 Grey
213036-3 (DS) 213037-3 (SS)
EZ X4 Brown
213036-4 (DS) 213037-4 (SS)
EZ X5 Black
213036-5 (DS) 213037-5 (SS)
HTC 420 tool rings (not EZchange)
Art no.
420 S2 Gold ø180 213209-2
420 S3 Grey ø180 213209-3
420 M0 Lilac ø180 213210-0
420 M1 Silver ø180 213210-1
420 M1 Gold ø180 213210-2
420 X2 Gold ø180 213211-2
420 X3 Grey ø180 213211-3
Floor preparation
www.htc-floorsystems.com
HTC Ravager Art no.
Ravager™ 270mm Tool Complete 502746
Ravager™ 270mm Tool Complete 502756
Ravager™ 230mm Tool Complete 502752
Ravager™ 180mm Tool Complete 213119
Ravager™ 150mm 1700 rpm, Tool Complete
213107
T-Rex® -serien Art no.
EZ T-Rex® Classic A 502538
EZ T-Rex® Classic B 502539
EZ T-Rex DOME II A Prot. seg. 502548
EZ T-Rex DOME II B Prot. seg. 502546
EZ T-Rex Super II A 502602
EZ T-Rex Super II B 502604
T-Rex® Rings Prot. seg.210767 (160mm) 210868 (220mmA) 211551211293 (220mmB) 211552 210869 (270mmA) 211172210870 (270mmB) 211318
EZ GL T-Rex® 501772
HTCProfessional Floor SystemsProduct guide
Head office
HTC Sweden AB
Box 69
SE-614 22 Söderköping
Sweden
Street (delivery) address:
Klevvägen 7
SE-614 92 Söderköping
Sweden
Tel.: +46 (0)121-29400
Fax: +46 (0)121-15212
E-mail: [email protected]
www.htc-floorsystems.com
HTC France S.A.S.
ZI Mondeville Sud
10 Rue Nicéphore Niepce
14120 Mondeville
France
Tel.: +33 (0)2 31 34 27 00
Fax: +33 (0)2 31 34 09 29
E-mail: [email protected]
www.htc-floorsystems.com
HTC Floor Systems Ltd.
Unit 4 Kingston Business Park
Dunfermline Court
Maidstone Road
Kingston
Milton Keynes
MK10 0BY
United Kingdom
Tel.: +44 (0 ) 845 460 2500
Fax: +44 (0) 845 460 1500
E-mail: [email protected]
www.htc-floorsystems.com
HTC Inc.
5617 Tazewell Pike
Knoxville, TN 37918
USA
Tel.: +1 865 689 2311
Fax: +1 865 689 3991
E-mail: [email protected]
www.htc-floorsystems.com
HTC Floor Systems GmbH
Otto-Hahn-Str. 18
71069 SINDELFINGEN
Germany
Tel.: +49 (0)7031 41030 – 0
Fax: +49 (0)7031 41030 – 22
E-mail: [email protected]
www.htc-floorsystems.com
Find your nearest HTC distributor at www.htc-floorsystems.com/partners
HTC head officeHTC subsidiariesHTC distributors
EN
www.htc-floorsystems.com www.htc-floorsystems.com