ODYS Slim TV 10 1 EN Table of contents 1 Safety instructions................................................................................... 2 2 Product properties................................................................................... 5 2.1 Language Settings.................................................................................... 6 3 Controls .................................................................................................. 8 3.1 DVD player ............................................................................................... 8 3.2 Using USB memory and SD cards ............................................................ 11 3.3 Buttons of the Remote Control ............................................................... 12 4 Connecting the DVD player .................................................................. 15 4.1 Connecting to a television set ................................................................. 15 4.2 Connecting to an external A/V source .................................................... 15 4.3 Connecting headphones......................................................................... 16 4.4 Connecting to DVB-T Antenna ............................................................... 17 4.5 Power supply unit ................................................................................... 17 4.6 Car adapter ............................................................................................ 18 5 Rechargeable battery pack ................................................................... 19 5.1 Notes on using rechargeable batteries ................................................... 19 5.2 Connecting the rechargeable battery pack ............................................. 20 5.3 Charging the battery pack....................................................................... 20 5.4 Removing the rechargeable battery pack ............................................... 20 6 DVB-T functions.................................................................................... 21 6.1 Using the Setup Wizard .......................................................................... 21 6.2 TV programme selection and video text ................................................. 22 6.3 Additional DVB-T settings....................................................................... 23 7 Disc information .................................................................................... 27 7.1 Compatible disc formats ......................................................................... 27 7.2 Using discs ............................................................................................. 28 8 Playback operation ............................................................................... 29 8.1 Getting started........................................................................................ 29 8.2 DVD playback......................................................................................... 30 8.3 CD playback (Audio, VCD, SVCD) ......................................................... 31 8.4 Files View............................................................................................... 33 8.5 Image CD/DVD-Playback ....................................................................... 33 8.6 Video Files, MP3-Playback ..................................................................... 35 8.7 Programmable Playback ........................................................................ 37 9 Display Settings .................................................................................... 38 10 System settings..................................................................................... 39 10.1 General Setup ........................................................................................ 39 10.2 Language Setup ..................................................................................... 41 10.3 Audio Setup............................................................................................ 42 10.4 Video Setup............................................................................................ 42 11 Glossary................................................................................................ 44 12 Trouble-shooting ................................................................................... 45 13 Specifications........................................................................................ 47
Transcript
ODYS Slim TV 10
1
EN
Table of contents 1 Safety instructions...................................................................................2 2 Product properties...................................................................................5
2.1 Language Settings....................................................................................6 3 Controls ..................................................................................................8
3.1 DVD player ...............................................................................................8 3.2 Using USB memory and SD cards ............................................................11 3.3 Buttons of the Remote Control ...............................................................12
4 Connecting the DVD player ..................................................................15 4.1 Connecting to a television set.................................................................15 4.2 Connecting to an external A/V source ....................................................15 4.3 Connecting headphones.........................................................................16 4.4 Connecting to DVB-T Antenna ...............................................................17 4.5 Power supply unit ...................................................................................17 4.6 Car adapter ............................................................................................18
5 Rechargeable battery pack ...................................................................19 5.1 Notes on using rechargeable batteries ...................................................19 5.2 Connecting the rechargeable battery pack .............................................20 5.3 Charging the battery pack.......................................................................20 5.4 Removing the rechargeable battery pack ...............................................20
6 DVB-T functions....................................................................................21 6.1 Using the Setup Wizard..........................................................................21 6.2 TV programme selection and video text .................................................22 6.3 Additional DVB-T settings.......................................................................23
7 Disc information ....................................................................................27 7.1 Compatible disc formats .........................................................................27 7.2 Using discs .............................................................................................28
9 Display Settings ....................................................................................38 10 System settings.....................................................................................39
10.1 General Setup ........................................................................................39 10.2 Language Setup .....................................................................................41 10.3 Audio Setup............................................................................................42 10.4 Video Setup............................................................................................42
1 Safety instructions Thank you for choosing our product. Please read this manual carefully and observe all safety and operating instructions. Store the manual in a safe place for later reference.
The flash symbol displayed in a triangle warns the user of dangerous electrical voltages inside the device that could lead to electrical shocks with harmful effects to health if the device is used incorrectly.
or The exclamation point displayed in a triangle in the documentation indicates dangers when using and maintaining the device.
The information symbol in the documentation indicates useful information and tips for using and maintaining the device.
Caution
The device is a class 1 laser product. The corresponding label is located on the rear side of the device. When the housing has been opened and the lock is not engaged, visible laser radiation can escape. Avoid looking into the laser beam by all means.
Caution
The product contains a low-power laser device. In order to ensure the safety of the laser device, do not remove any cover and attempt to repair the unit. If any service is needed, please contact the distributor or its authorized service center. To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. Unplug the product from the wall outlet before servicing or when it is unused for a long period of time. The manufacturer should not hold responsibility for the damage caused by any substitutions and modifications of the product without authorization from the manufacturer or authorized unit.
Power supply Connect the power supply cable to the DC 12V IN jack on the right side of the device. Connect the power plug to an earthed socket AC 100-240 V. If you have problems when plugging the mains plug into the socket, rotate the plug by 180° and plug it in again.
ODYS Slim TV 10
3
EN
Caution Read, keep and follow these instructions and heed all warnings.
• Do not open the casing of the device under any circumstances, and do not attempt to repair or modify the device. Malfunctions, damage, electric shocks and fires can occur as a result.
• Never expose the device to rain, moisture or humidity. Malfunctions, damage and electric shocks can occur as a result.
• When cleaning the device, do not use any volatile substances, such as solvents, to avoid damaging the surface. Clean the device only using a soft, dry cloth.
• Ensure adequate air circulation around the device. Do not place the device on soft furniture, carpets or other materials while in operation, as this may restrict the air from properly circulating around the device.
• The device may not be excessively heated or operated near heat sources (e.g. heaters). Malfunctions, damage, smoke and fires can occur as a result.
• Connect the device only to mains sockets that are properly earthed (protective earth). The mains voltage must correspond to the operating voltage of the device indicated on the device housing. When connecting the device to other electric devices, always follow the manufacturer's instructions.
• Make sure that the cables are not damaged, stretched or twisted and that no short circuits occur.
• Use only accessories specified or supplied by the device manufacturer. This also applies to any attachments and fasteners.
• Place the device in a secure spot where it cannot shift or fall. If used in a vehicle, the device must be securely fastened to avoid injuries or accidents resulting from the device shifting or falling down.
• During a thunderstorm, disconnect the device from the mains. Do not use the device during a thunderstorm. Malfunctions, damage and electric shocks can occur as a result. Disconnect the power plug from the socket when you do not use the device for an extended period of time. Keep the device in a clean, dry location where it is not exposed to direct sunlight.
Caution • In case of malfunctions or damage, maintenance or repair work may be required. Do not
use the device if there is visible damage to it. All maintenance and repair should be conducted by qualified service technicians only.
• Do not place any heavy objects and objects that contain liquids, such as vases, on top of the device..
• Make sure that no objects or fluids can penetrate into the device though openings or venting slots. This could lead to short circuits, damage, electric shocks and fires.
• Do not touch the TFT LCD screen with your bare hand. • Observe the safety instructions on rechargeable batteries in chap. 5.1. Operating the device in a vehicle
• Please note that the device may not be used while the vehicle is in motion. It may only be used when the vehicle is parked!
• When operating the device in a vehicle, make sure that it does not inhibit the driver's forward or rear view and that it does not interfere with the safe operation of the vehicle. Otherwise injuries or accidents may result. The driver must not operate the device or look at the screen while driving. Do not allow your children to loosen or disengage their safety belts to operate the device.
ODYS Slim TV 10
4
EN
• Do not place the device near the airbag in the vehicle, thus avoiding functional disorders. When the airbag deploys, the device or accessories may be flung through the vehicle and thus can cause injuries and accidents.
• Install the cables so that they do not present an obstacle to operating the vehicle or to getting into or out of the vehicle. Make sure that no cables can accidentally wrap around the steering wheel, the pedals or any passenger's feet. Tie the cables together.
• If operating the device inside a vehicle, do not set the volume level too high so that you are still able to hear sounds occurring on the inside and outside of your vehicle. Otherwise accidents can occur.
Note DVD players and discs are coded by region. Your DVD player will only play back discs whose region code matches that of the player. The region code of your DVD player is 2 (Europe).
Note on copyrights This device is equipped with technology for the protection of copyrights that is protected by patents in the United States of America and by other laws regarding the protection of intellectual property. Use of this copyright protection technology must be approved by Macrovision. This approval is granted exclusively for personal use and other limited visual presentations, unless Macrovision has expressly permitted a more extensive use. Reverse engineering and disassembly are forbidden.
ODYS Slim TV 10
5
EN
2 Product properties • Excellent sound quality:
Dolby Digital technology ensures outstanding sound. • High resolution:
More than 500 lines of horizontal resolution with MPEG-2 • AV In: Input for external audio and video signals. Can be connected to a variety of
external AV sources. AV Out: Analogue audio/video output
• High resolution 10.2" LCD colour screen • Switchable power supply unit:
Automatic adjustment to different voltages in different countries. • On-screen menu in English, French, Spanish, German etc. • Shock resistance:
Electronic shock resistance allows the device to be operated in a vehicle
Special playback functions: • Various playback speeds (fast forward, fast reverse, slow play, Search By Time),
supports several playback languages and repeat functions. Multiple display formats and camera perspectives, zoom in/zoom out, multilingual subtitles
• Remember the last playback position and resume playback when turned on without opening the disc cover (Resume).
• Parental control: Blocking of certain scenes or entire discs.
Support URL: http://www.odys.de See our website for the latest information on this DVD player, on other products by our company and on our company itself. If you have questions or problems, please read the FAQs on our website or contact our customer support service [email protected].
ODYS Slim TV 10
6
EN
2.1 Language Settings This device offers three separate menus in which the language settings may be set.
DVD Menu:
1. To change the settings for the DVD mode, switch the device to the DVD mode.
2. Press the Setup key on the remote control. 3. Select the menu „Language Setup” using the key. 4. Select the menu „OSD Language” using the key. 5. Select „German” to change the menu language to German. 6. Confirm using the „Enter” key.
DVB-T Menu:
1. To change the settings for the DVB-T mode, switch the device to the DVB-T mode.
2. Press the Setup key on the remote control. 3. Select the menu „System Config” and „Language“, press the “Enter” key to
confirm. 4. Select „German” to change the menu language to German 5. Confirm using the „Enter” key.
P-Menu (Display Settings):
1. Press the „P-MENU” key. 2. Press the P-MENU key continuously until the entry „Language” has been
highlighted. 3. Use the + or – keys to select the desired language. 4. The menu will automatically close after 4 seconds of inactivity.
ODYS Slim TV 10
7
EN
Contents of package
1 x DVD player + carrying bag 1 x rechargeable battery pack 1 x remote control
1 x battery for remote control 1 x operating manual Vehicle Bag
Antenna 1 x mains cable with power supply unit
1 x audio/video cable 1 x car adapter
Note Accessories and their corresponding part numbers are subject to change without notice due to technological progress.
ODYS Slim TV 10
8
EN
3 Controls 3.1 DVD player Front view
1. TFT screen Presents high resolution picture.
2. Loudspeaker Two speakers output high quality stereo sound.
3. Sensor for remote control Sensor that receives the signal from the remote control
4. Power supply indicator lamp / Display for charge state of rechargeable battery In active mode, it is red; in standby mode, it turns green. When switched off, the lamp will blink green when charging the battery and will remain constant once the charging has finished.
Note Charge the battery with the device switched off. This will shorten the charging time and extend the life of the battery.
Top view 1. DVB-T Antenna Jack (DVB-T antenna connection) 2. STOP button
Stops playback 3. SETUP button
Accesses the setting for the DVD or DVB mode
ODYS Slim TV 10
9
EN
4. Direction buttons ( ) Selects the menu entries or channel, both forwards and backwards (DVB)
5. Direction buttons ( , ) To select menu objects fast forward/rewind during playback Jump to next/previous chapter
6. PLAY/PAUSE button Starts playback or activates the pause function
7. Direction buttons ( , ) To select menu objects fast forward/rewind during playback Jump to next/previous chapter
8. DVD/DVB quick-change button Switches between the DVD and DVB functions
9. AV button Switches between DVD/DVB-T playback and reception of an external AV signal source (activates the AV In signal input)
10. Vol - button To decrease the volume.
11. Vol+ button To increase the volume
12. P-MENU button To change the display format, brightness, contrast, colour To change display settings
Right view
1. Power supply jack (12 V DC) Power supply unit or car adapter connection
2. SD/MMC/MS card slot 3. Headphone jack (dual jack)
When the headphones are inserted, the loudspeakers are switched off. 4. USB terminal (USB connection to USB mass storage/Sticks) 5. Jack for audio/video output
For connecting an external monitor / speakers 6. Jack for audio/video input
For connecting an external / audio-video source
2 3 4 5 61
ODYS Slim TV 10
10
EN
Left view
1. Power on/off switch (for switching the device on and off)
Backside View
1. Rechargeable battery locks 2. Disc cover 3. Connection for rechargeable battery (see chap. 5.2)
ODYS Slim TV 10
11
EN
3.2 Using USB memory and SD cards
1. Connect the device to the power supply. 2. Switch the device on. 3. Press the DVD/DVB-T switch on the control panel to switch to the DVD-Mode and insure that
no CD/DVD is present in the drive. 4. Insert the USB memory stick into the USB port or insert the SD card into the SD card slot (see
the images below).
Prior to connecting the device, make sure that the USB memory stick or the SD card contains JPEG, MP3 or WMA files. 5. Open and close the DVD tray to start the reading process. 6. The following display appears on the screen (Chapter 8.4):
7.
8. Press the , buttons to select the folder and confirm your selection using the ENT button. 9. Press the , buttons to select the desired file and start playback using PLAY . 10. Press to the STOP button to stop playback. Playback can now be continued again from the
beginning of the current file. Press the button to return to the folder menu.
Once you are finished with the JPEG or WMA playback, remove the USB plug or the SD card. The device then returns to DVD mode.
The USB 1.1 jack cannot be used for connecting digital cameras or other USB devices. Please note that Videos with large data files may have an effect on the playback. This device accepts memory cards with a maximum capacity of 2 GB.
Current Folder Filename
Folder Files
Music Images Videos
ODYS Slim TV 10
12
EN
3.3 Buttons of the Remote Control
1. AV button
Switches between DVD/DVB-T playback and reception of an external AV signal source (activates the AV In signal input)
2. – Shortening the selected values in the display settings menu (P-Menu).
3. P-MENU The display settings (brightness, contrast, colour, and hue) and display mode settings (viewing 4:3 or 16:9) may be altered by pressing the „P-Menu“ key once again.
4. + Increase the selected values in the display settings mode (P-Mode).
5. DVD/ DVB-T Switches between the DVD and DVB-T functions
6. P-POWER For switching the screen on and off
7. Vol - button To decrease the volume.
8. Vol+ button To increase the volume
9. Numerical buttons (0-9) To select the corresponding number for title, chapter, time etc.
10. GOTO/SEARCH DVD mode: Press to select the desired disc starting Time, Track or Title DVB mode: Activate Automatic channel search
12. SETUP Access to system settings for the DVD or DVB mode
13. MENU While in playback mode, to display the menu of the DVD currently inserted. DVB: Calls the channel list menu
14. ZOOM/TV/RADIO DVD-Mode: Access the zoom function DVB-T Mode: switching between TV/Radio
15. Direction buttonsn / CH+ CH- Selects the menu entries or channel, both forwards and backwards (DVB)
16. ENTER For confirming your selection
17. REPEAT To repeat a chapter, track, title or the entire disc
18. PROG To arrange a playback sequence (DVD) DVB: enters the channel schedule
19. MUTE Switch the sound off
20. DISPLAY Displays or hides detailed information about the disc in the device DVB-T: Enter EPG
21. / Press longer: Activate fast reverse press once: jump to the beginning of the current track or chapter of the disc press twice: jump to the beginning of the previous track or chapter of the disc DVB Mode: Switches to the favourite list
22. PLAY / PAUSE Starts playback or activates Pause
23. / Press longer: activate fast forward playback Skips the track or chapter forward in DVD mode or switches to the game menu in DVB mode
24. STOP / RETURN DVD Mode: Press once: Stops playback (press PLAY to continue playback at this point); press twice: stops playback completely; DVB mode: access the channel viewed last
25. TITLE /Teletext (TTX) Shows the title menu if the disc contains subtitles or displays the teletext in DVB mode
26. SUBTITLE To select a language for subtitles (if available on disc) or turn off the subtitles in the DVD mode
27. AUDIO Selects a different playback language of a DVD (if available on disc)
28. ANGLE Access different camera angles in DVD mode (if available on disc)
ODYS Slim TV 10
14
EN
Preparation of the Remote Control Place the remote control on an even surface and insert the supplied button cell into the remote control as follows.
1 Refer to the drawing and remove the empty battery receptacle.
2 Insert the battery into the receptacle. Make sure the polarity matches the marks inside the component.
3 Insert the receptacle into the remote control.
Button cell data Battery type: CR2025 , 3 V Service life: approximately 1 year (for normal use and room temperature)
Using Of Remote Control Point the remote control towards the main unit when operating. The remote control works best at a distance less than 5 m and at an angle of up to 30° to the front of the unit. No obstacles may stand in the way between remote control and infrared sensor and do not place the remote control in direct sunlight. If the remote control unit fails to work even when it is operated near the player, replace the battery.
Notes on batteries If the remote control is not used for a long period of time, please remove the battery from the compartment. Do not heat batteries or dispose of them in fires. Do not dismantle, deform or modify batteries.
ODYS Slim TV 10
15
EN
4 Connecting the DVD player • The DVD player, the television set and any other electric devices to be connected to the
DVD player must be switched off and disconnected from the mains. • Observe the colour coding when connecting audio and video cables. 4.1 Connecting to a television set Audio/video connectors
Using the audio/video cables, connect the DVD player to the A/V inputs of the television set as shown in the illustration.
4.2 Connecting to an external A/V source Using the audio/video cables, connect the DVD player to the A/V signal source (for example, DVD or video recorder) as shown in the illustration. Press the AV button on the control panel of the DVD player.
Black
Yellow Red
Signal
Audio/Video Cable
TV
White
ODYS Slim TV 10
16
EN
Note When external audio signals are received during DVD playback, this can lead to disturbing noise in the loudspeakers. If this is the case, disconnect the audio cable.
4.3 Connecting headphones Connect the headphones to the headphone jack on the right side of the device. The loudspeakers are automatically deactivated.
Caution Excessively high volume can damage your hearing. Turn the volume down before connecting the headphones and then turn the volume up to a moderate level.
Earphone jacks
Audio/Video Cable
Signal
Red Yellow
White AV Source
Black
ODYS Slim TV 10
17
EN
4.4 Connecting to DVB-T Antenna Plug the DVB-T antenna into the DVB-T jack on the rear panel of the unit to receive TV signal.
4.5 Power supply unit The DVD player is delivered with a power supply unit.
Connect the power supply cable to the DC 12V IN jack on the right side of the device as shown below. Connect the power plug to an earthed socket. The power supply indicator lamp lights up red.
Note Turn off the DVD player before you unplug the mains cable from the socket. When the DVD player operates on mains power, the LCD screen lights up brighter than when it operates on battery power.
ODYS Slim TV 10
18
EN
4.6 Car adapter Use the supplied car adapter to operate the DVD player in a vehicle.
Connect the adapter cable as shown below to the mains terminal DC 12V IN of the DVD player and the cigarette lighter of the vehicle.
The driver must not operate the device or look at the screen while driving. Position the device in a way that ensures an uninhibited view. Remove the rechargeable battery pack before connecting the device using the car adapter. If possible, disconnect the car adapter cable while starting the vehicle.
Caution Only use the power supply unit provided or the 12V adapter. The adapter is only designed for 12V and should not be connected when starting the engine.
to the cigarette lighter socket
ODYS Slim TV 10
19
EN
5 Rechargeable battery pack A rechargeable lithium ion battery is included in the scope of delivery of your portable DVD player. This battery is connected on the rear side of the device. Fully charge the battery before you use the device for the first time. Normally it takes about five hours for the battery to be charged. When the rechargeable battery is fully charged, you can operate the device with it for about 2 (DVB-T) – 2.5 (DVD) hours. However, the actual operating time also depends on the disc you use. Fully charge the battery when it will not be used for an extended period of time.
5.1 Notes on using rechargeable batteries When using a new rechargeable battery, fully charge it prior to use.
Use rechargeable batteries only in temperatures between 0°C and 40°C. Do not expose rechargeable batteries to high temperatures or direct sunlight.
Do not throw the battery into water or fire.
Ensure adequate air circulation around the device. Do not place the device on soft furniture, carpets or other materials while in operation, as this may restrict the air from properly circulating around the device.
Do not short-circuit the contacts of a rechargeable battery.
Do not disassemble the rechargeable battery.
When switched off, the indicator lamp will blink green when charging the battery and will remain constant once the charging has finished.
Remove the battery pack when it is fully charged or when it is not used.
When the state of charge reaches a low level, the symbol is displayed on the LCD screen. Some minutes later the DVD player turns off automatically.
. Note Charge the battery with the device switched off. This will shorten the charging time and extend the life of the battery. Charge the battery fully before using for the first time.
Caution Do not touch the battery's terminals with any metal objects. This would cause the battery to go to standby mode. Connect the DVD player with the battery connected to a voltage supply source to exit the standby mode.
ODYS Slim TV 10
20
EN
5.2 Connecting the rechargeable battery pack Connect the rechargeable battery pack as described below:
1 Place the DVD player with the bottom side up on a plain, clean surface.
2 Hold on to the device with one hand. Position the battery's plastic pins so that they are aligned with the matching notches on the DVD player, and push the battery inside the device until it audibly locks into place.
5.3 Charging the battery pack Use the power supply unit provided for charging the rechargeable batteries. In doing so, connect the power supply unit to the DVD player as described in chap. 4.6.
5.4 Removing the rechargeable battery pack Fully charge the battery and remove it from the device when it will not be used for an extended period of time. Even a device that is turned off uses small amounts of electricity in standby mode which ultimately discharges the battery.
Turn off the DVD player before you remove the rechargeable battery as described below:
1 Press and hold the rechargeable battery lock toward arrow , as displayed on the right.
2 Carefully slide the rechargeable batter toward arrow .
3 Carefully remove the rechargeable battery and store it in a suitable place if it is not to be used for an extended time period.
Note Remove the rechargeable battery when you use the car adapter for power supply.
ODYS Slim TV 10
21
EN
6 DVB-T functions
Note To avoid distortion, it may me necessary to switch the display to 4:3 or 16:9 which ever best suites the current station. Refer to Chapter 9 Please note that movies using the 21:9 format may cause black margins on the upper and lower margins of the display.
NOTE:
Insure that DVB-T reception is available for your area. DVB-T radio in particular is very limited and not available in most locations.
Depending on your region and building structure, a stronger antenna may be requires in order to receive DVB-T stations. The antenna provided is only designed for reception when close to the DVB-T transponder. Metal buildings and the geographic location of the transponder may have a strong effect on the reception. Please note that this is not a device defect; merely specific specifications for the reception of DVB-T.
Appropriate antennas may be obtained from your local specialty stores.
1 Connect the unit to the power and take steps below to go on with the setup.
2 Press the DVD/USB/SD/DVB button on the device or remote control to switch to DVB-T mode.
3 Press the SETUP button on the device or remote control to open the Setup Wizard for initially performing the basic setting or to return to the DVB-T setting menu afterwards.
6.1 Using the Setup Wizard
Navigating through the menu In this menu, you can select the NO/YES options using the / direction arrows. Select YES for switching to the next menu and confirm using ENT or ENTER. Select NO to exit the menu.
Perform your desired settings for the two options “Country”, “Language” and “Time zone” (see below) in this menu. To continue using the Setup Wizard, select NEXT using / and confirm using ENT.
ODYS Slim TV 10
22
EN
Select Country Press to select the “Country” option, confirm using and select the desired country using / .
OSD Language Press to select the “OSD Language” option, confirm using and select the desired language using / .
Automatic channel search (auto Scan)
In this menu, you can select the BACK/YES/NO options using / . Select YES for the automatic scan for TV channels and confirm using ENT.
6.2 TV programme selection and video text TV programme selection
1 Exit setup mode by pressing the SETUP button.
2 Press the 0-9 and +10 number keys on the remote control to select the desired TV programme.
3 You can also switch to the stored TV programmes going both forwards and backwards in succession using the or CH+ and CH- buttons.
4 Set a suitable volume using the volume control on the ride side of the device.
Video text
1 Press the TELETEXT button on the remote control to switch to the video text.
2 Enter the three-digit number for the desired video text page directly using the key numbers 0-9.
3 You can also navigate through the available video text pages as follows: 100 pages down 100 pages up One page up One page down
4 To return to normal TV operation, press the TELETEXT button again.
ODYS Slim TV 10
23
EN
6.3 Additional DVB-T settings 1. Programme guide Press the SETUP button again. Press to select the “Programme guide” option, confirm using ENT or ENTER. The following menu is displayed:
Navigating through the menu In this menu, press to select the desired option and confirm using ENT. Using the SETUP button, you return to the previous menu.
2. System configuration Press to select the “System configuration” option and confirm using ENT. The following menu is displayed:
In this menu, press to select the desired option and confirm using ENT. Using the SETUP button, you return to the previous menu.
TV setting Press to select the “TV setting” option, confirm using ENT. The following menu is displayed:
Navigate through this menu as displayed above and perform your desired settings for the three options “TV Norm”, “Video Norm” and “Screen Mode” (see below).
Press to select the “TV Type” option and confirm using ENT. Using , select the setting appropriate for you from the 4:3 PS, 4:3 LB, 16:9 (e. g. usually 16:9) and confirm using ENT. (PS: Pan&Scan, LB: LetterBox, see glossary chap. 10).
Video setting Press to select the “Video setting” option and confirm using ENT. The following menu is displayed:
Navigate through this menu and perform your desired settings for the four options (see below).
Brightness, contrast, colour setting Press to select one of the options and confirm using ENT. Using to select the desired value between 0 … 12 and confirm using ENT.
ODYS Slim TV 10
24
EN
Language Press to select the “Language” option and confirm using ENT. The following menu is displayed:
OSD Language (Screen) Press ENT, select the language appropriate for you from Chinese, English, German, Spanish, French etc. using and confirm using ENT.
Parent control Press to select the “Parent control” option and confirm using ENT. The following menu is displayed:
Navigate through this menu and perform your desired settings for the two options (see below).
Change PIN Press to select the “Change PIN” option and confirm using ENT. Enter the old or new PIN (password) and confirm with ENT. (The Default PIN is: 0000)
Change lock Press to select the “Change lock” option and confirm using ENT. Enter the valid PIN (password) and confirm with ENT.
Time setting Press to select the “Time setting” option and confirm using ENT. The following menu is displayed:
Navigate through this menu and perform your desired settings for the two options (see below).
Time zone Press to select the “Time Zone” option and confirm using ENT. Using , select the desired time zone (GMT+ 0…10 or GMT− 0…10).
Europe (with exception to: Portugal and England) GMT+1 Setting It may be necessary to switch to the GMT +2 setting during European daylight savings time (
Portugal and England: GMT+0 (GMT+1, daylight savings time)
System Info
In this menu, press to select the option “System Info” and confirm using ENT. The menu displays various information about the system. Using the SETUP button, you return to the previous menu.
3. Installation
ODYS Slim TV 10
25
EN
Press to select the “Installation” option and confirm using ENT. The following menu is displayed:
In this menu, press to select the desired option and confirm using ENT. Using the SETUP button, you return to the previous menu.
Automatic channel search (Auto Scan) Press to select the “Auto Scan” option and confirm using ENT. The following menu is displayed:
Navigate through this menu and perform your desired settings for the two options (see below).
Select Country Press to select the “Select Country” option, confirm using ENT and select the desired country using / (Germany, England, Spain, Italy, France etc.).
Start Scan Press to select the “Start Scan” option and confirm using ENT. The device now automatically searches for receivable DVB-TV channels.
Store the found channels by using / to select YES in the next menu and confirm using ENT (see also “Storing search results” in chap. 6.1) or cancel them using NO.
Manual channel search (Manual Scan) Press to select the “Manual Scan” option and confirm using ENT. The following menu is displayed:
Navigate through this menu and perform your desired settings for the four options “Country”, “Scan Type”, “Start Channel” and “Start Scan” (see below).
Country Press to select the “Select Country” option, confirm using ENT and select the desired country using / (Germany, England, Spain, Italy, France etc.).
Scan type Press to select the “Scan type” option, confirm using ENT and select the desired scan type (individual channel, channel range) using / .
Start channel
ODYS Slim TV 10
26
EN
Press to select the “Start channel” option, confirm using ENT and select the desired start channel number using / .
Start Scan Press to select the “Start Scan” option and confirm using ENT. The device now automatically searches for the next receivable DVB-TV channel.
Store the found channels by using / to select YES in the next menu and confirm using ENT (see also “Storing search results” in chap. 6.1) or cancel them using NO.
Standard setting (Default setup) Using this option, you reset the values to the factory settings. Press to select the “Default setup” option and confirm using ENT. The following menu is displayed:
Press to select the OK and confirm using ENT. To cancel the dialog and to return to the previous menu, select “Cancel”.
4. Game Press to select the “Game” option and confirm using ENT. The following menu is displayed:
In this menu, press to select the desired game (BoxMan, Burning Tetris, Hit Rat) and confirm using ENT. You can play the games shown on the display. Using the SETUP button, you return to the previous menu.
ODYS Slim TV 10
27
EN
7 Disc information 7.1 Compatible disc formats
DISC LOGO Diameter Running time (sides/layers)
133 min (SS-SL) 242 min (SS-DL) 266 min (DS-SL)
12 cm
484 min (DS-DL) 41 min (SS-SL) 75 min (SS-DL) 82 min (DS-SL)
DVD
8 cm
150 min (DS-DL)
12 cm 74 min CD
8 cm 20 min
MP3 12 cm 600 min
JPEG 12 cm
The discs' mode of operation depends on the manufacturer. Observe the corresponding notes for the respective disc.
ODYS Slim TV 10
28
EN
7.2 Using discs Handling
When inserting or removing a disc, do not touch the surface (see illustration). Do not affix paper or labels on the disc.
Cleaning
Fingerprints and other contaminations can reduce the quality of the sound and the video. Use a soft, clean cloth for cleaning that can be moistened with a neutral, diluted cleaning agent if the disc is very contaminated.
Do not wipe in circular motion (risk of static noises); instead, always wipe from the centre of the disc toward the outer edge (see illustration).
Note on storage Do not expose the discs to direct sunlight or high temperatures.
CAREFULLY READ THE FOLLOWING INSTRUCTIONS BEFORE TURNING ON THE DVD PLAYER FOR THE FIRST TIME.
ODYS Slim TV 10
29
EN
8 Playback operation 8.1 Getting started
1 Connect the device to a mains socket using the power supply unit that is delivered with the device.
2 Push the POWER ON/OFF switch on the left side of the device to the ON position. The device's power supply indicator lamp lights up green, and a welcome screen is displayed.
3 Remove the transportation safety lock from the DVD drive.
4 Open the DVD tray on the back side, with the printing to the rear and place a disc into the tray, then close the tray (see illustration).
5 Insure that the DVD mode has been selected. The DVD player automatically starts with the playback.
6 Adjust the volume to the desired level using the VOLUME controller on the right side.
7 Press the PWR button on the remote control. The DVD player switches to standby mode and the power supply indicator lamp lights up red.
Operating the device and general buttons Depending on the situation, you can use the buttons on the device or remote control to operate the device. However, the remote control enables greater usage of the device functions.
P-MENU button (device)
To change brightness, contrast or colour. Adjust the values using the +/- buttons.
ZOOM button (remote control)
For DVDs the image size is successively changed to the following values compared to the normal size: 2x, 3x, 4x, 1/2, 1/3, 1/4. This function is not available for CDs.
ODYS Slim TV 10
30
EN
8.2 DVD playback
Note To avoid distortion, it may me necessary to switch the display to 4:3 or 16:9 which ever best suites the current station. Refer to Chapter 9 Please note that movies using the 21:9 format may cause black margins on the upper and lower margins of the display.
Start playback Insert a disc. The DVD player automatically starts with the playback. In the initial menu, select the desired option using the
buttons. Then press ENTER on the remote control or ENT on the DVD player.
PLAY/PAUSE
Press this button once (during playback) to pause playback. Press this button a second time to resume playback.
STOP Press this button once (during playback) to stop playback; to resume from the same position, press /PLAY. Press this button a second time to end playing back the disc altogether. Continue at the start of the disc using .
MENU Press this button once (during playback) to display the menu on the screen. Press this button a second time to resume playback. In menu mode, select the desired option using the buttons (0-9 on the remote control). Then press ENT or ENTER.
/ button Press this button once to jump to the beginning of the current track or chapter. Press this button a second time to jump to the beginning of the previous track or chapter. Press longer: Fast rewind.
Pressing this button longer and repeatedly will increase the rewind speed successively to 2x, 4x, 8x, 20x. Continue playback at normal speed using .
/ button To jump to the beginning of the next track or chapter. Press longer: Fast forward Pressing this button longer and repeatedly will increase the forward speed successively to 2x, 4x, 8x, 20x. Continue playback at normal speed using .
Display button Press this button once to display detailed information about the disc in the player. (Pressing this button repeatedly).
AUDIO button During playback the available audio streams are enabled successively (DVDs can contain up to eight audio streams; e. g., for multiple languages.
ODYS Slim TV 10
31
EN
SUBT button During playback, allows you to select a language for subtitles or to turn subtitles on/off. DVDs can contain up to 32 subtitle tracks. By pressing this button repeatedly, you call up the following settings:
SUBTITLE 1/N: Subtitle 1 is displayed. SUBTITLE 2/N: Subtitle 2 is displayed. SUBTITLE */N: Subtitle * is displayed. SUBTITLE OFF: No subtitles. N represents the total number of subtitle tracks included. This function is only available for DVDs that contain multiple subtitle tracks.
REPEAT button
To repeat a chapter, a title or the entire disc
GOTO button Enables you to select a position (time, track or title) at which to start playback. Use the buttons to select the desired option. Use the 0-9 number keys to enter the time directly and then confirm using ENTER or ENT. Press the GOTO button again to resume normal playback.
PROG button During playback: Use the figures to determine the sequence of files. Select play to start the sequence playback or press the PROG-Key again to exit the settings (refer to Chapter 8.7).
ANGLE button Pressing this button cycles through the camera perspectives available for the particular scene (see illustration).
This function is only available for DVDs that contain recordings of multiple camera perspectives.
TITLE button The content of a DVD is often divided into several titles that contain multiple menus. If you press the TITLE button during playback, the title menu is displayed. Using the buttons or the numerical buttons (0-9) on the remote control, you can select the desired title or the desired option. Confirm with ENTER or ENT.
8.3 CD playback (Audio, VCD, SVCD) When you insert a CD in the DVD player while the power is on, the tracks are played in the preset order. Use the or button to play a specific track.
PLAY/PAUSE
Press this button once (during playback) to pause playback. Press this button a second time to resume playback.
STOP / Press this button once (during playback) to stop playback; to resume from the same position, press / PLAY. Press this button a second time to end playing back the disc altogether.
ODYS Slim TV 10
32
EN
/ button fast-forward
To jump to the beginning of the next track or chapter. Press longer: Fast-forward.
Pressing this button longer and repeatedly will increase the forward speed successively to 2x, 4x, 8x, 20x. Continue playback at normal speed using .
/ button fast rewind
Press this button once to jump to the beginning of the current track or chapter. Press this button a second time to jump to the beginning of the previous track or chapter. Press longer: Fast rewind.
Pressing this button longer and repeatedly will increase the rewind speed successively to 2x, 4x, 8x, 20x. Continue playback at normal speed using .
REP button Repeats one track, all tracks in succession or switches the repeat function off again.
GOTO button Enables you to select a position (time or track) at which to start playback. During CD playback the following options are displayed successively:
Disc Go To:--:-- Track Go To:--:-- Select Track:--/N
N is the number of tracks on the disc) You can select the desired option directly using the buttons 0-9 on the remote control.
DISPLAY button
Displays the detailed information on the inserted disc and switches the information display off again.
AUDIO button To cycle through the following sound effects:
Mono Left Mono Right Stereo
Hold down the button for about 2 s to close the display window.
PROG button During playback: Use the figures to determine the sequence of files. Select play to start the sequence playback or press the PROG-Key again to exit the settings (refer to Chapter 8.7).
ODYS Slim TV 10
33
EN
8.4 Files View
8.5 Image CD/DVD-Playback
1 Insert a CD/DVD. The DVD player automatically starts with the playback
2 The root folder and various subfolders are displayed. Select a folder using the buttons on the remote control. Confirm your selection using one of the
following buttons: , ENTER, PLAY/ on the remote control, or PLAY/ , ENT on the DVD player.
3 The screen switches to display the selected subfolder. Select a file using the buttons on the remote control. Confirm your selection using one of the following buttons: ENTER on the remote control, or PLAY/ on the remote control or the DVD player.
4 Press the button to return to the previous folder. You can also move the light yellow bar to the icon. Confirm your selection using one of the following buttons: ENTER on the remote control, or PLAY/ on the DVD player.
Note On many CDs, other file formats may be located in the same directory as the image files. To display an image, press the / keys until the following symbol is displayed on the lower centre of the display:
Confirm using the Enter key
PLAY/PAUSE Press this button once (during playback) to pause playback.
Press this button a second time to resume playback.
STOP / During playback: To display the image files as thumbnails.
To resume normal playback, press the PLAY / button.
Actual Directory File Name
Directories Files
Music Images Videos
ODYS Slim TV 10
34
EN
button To jump to the previous file
button To jump to the next file
DISPLAY button Press this button once to display detailed information about the disc in the player.
Press this button a second time to close the display window..
This function is only available in folder mode.
REPEAT button Press this button once to play back the content of a file/folder in loop mode.
Press this button repeatedly to cycle through the following options:
Repeat One Repeat Dir Repeat All Repeat Off Repeat One: Plays back the current file repeatedly.
Repeat Dir: Plays back all files of the current folder.
Repeat All: Repeatedly plays back all files of the current folder in the original order.
Repeat Off: Exits the repeat mode.
RETURN button During playback: To go to the root folder.
To resume normal playback, press the PLAY/ button.
PROG button During Playback: Changing the transition between images.
During playback: Use the figures to determine the sequence of files. Select play to start the sequence playback or press the PROG-Key again to exit the settings (refer to Chapter 8.7).
Note To avoid distortion, it may me necessary to switch the display to 4:3 or 16:9 which ever best suites the current station. Refer to Chapter 9
ODYS Slim TV 10
35
EN
Rotating pictures
Your can rotate a picture that is being displayed by using the direction buttons ( ).
Press the button to rotate the current picture clockwise as shown below.
Press the button to rotate the current picture anti-clockwise as shown below.
Press the button to flip the current picture horizontally as shown below.
Press the button to flip the current picture vertically as shown below.
Note In some picture CDs, the functions for rotating and zooming pictures are not available due to design limitations.
8.6 Video Files, MP3-Playback
1 Insert a CD/DVD. The DVD player automatically starts with the playback.
2 The root folder is displayed. Select a folder using the buttons on the remote control.
3 Start of playback: Confirm your selection using one of the following buttons: , ENTER, PLAY/ on the remote control, or PLAY/ , ENT on the DVD player.
ODYS Slim TV 10
36
EN
Note On many CDs, other file formats may be located in the same directory as the image files. To display an image, press the / keys until the following symbols are displayed on the lower centre of the display:
The left symbol for playback and the right symbol for music files
Confirm using the Enter key
PLAY/PAUSE Press this button once (during playback) to pause playback.
Press this button a second time to resume playback.
/ button To jump to the next file
Press longer to activate fast forward
Pressing this button longer and repeatedly to increase the forward speed successively to 2x, 4x, 8x, 20x. Continue playback at normal speed using .
/ button To jump to the previous file
Press longer to activate fast rewind.
Press this button longer and repeatedly to increase the rewind speed successively to 2x, 4x, 8x, 20x. Continue playback at normal speed using .
STOP / Press this button once (during playback) to stop playback; to resume from the same position, press / PLAY. Press this button a second time to end playing back the disc altogether.
MENU button During playback: To go to the root folder. Continue playback at normal speed using .
REP button Press this button once to play back the content of a file/folder in loop mode. Press this button repeatedly to cycle through the following options:
Repeat One Repeat Dir Repeat All Repeat Off
PROG button Use the figures to determine the sequence of files. Select play to start the sequence playback or press the PROG-Key again to exit the settings (refer to Chapter 8.7).
AUDIO button Enables you to select the desired sound effect. Hold down the button for about 2 s to close the display window.
GOTO button Direct title selection using title numbers (only for MP3 playback)
ODYS Slim TV 10
37
EN
DISPLAY button Displays the detailed information on the inserted disc and switches the information display off again.
SUBT button To select a language for subtitles (if available on disc) or turn off the subtitles
Note Not all discs support the functions for subtitles, camera perspectives or audio effects.
8.7 Programmable Playback
By pressing the program key (PROG) during playback a user defined sequence of available files may be determined.
During playback: Use the figures to determine the sequence of files. Select play to start the sequence playback or press the PROG-Key again to exit the settings (refer to Chapter 8.7).
Selecting “Clear” will delete all entries.
Note This menu is not available during playback. Pleas stop the playback first. All entries will be deleted should the CD/DVD be ejected or the device switched off.
ODYS Slim TV 10
38
EN
9 Display Settings The display settings (brightness, contrast, colour, and hue) and display mode settings (viewing 4:3 or 16:9) may be altered by pressing the „P-Menu“ key once again. Press the „P-Menu” key again to enter the options. Reduce the selected values for the display settings menu (P-Menu).
Increase the selected values for the display settings menu (P-Menu).
Note Changing the display modes (Screen Mode) will cause the display to switch between 4:3 und 16:9 formats.
AUX/DVD 16:9
Brightness 50
Contrast 50
Color 50
Sharpness 50
Screen Mode 16:9
Screen On/Off On
Reset
Language English
ODYS Slim TV 10
39
EN
10 System settings In this section, you will learn how to customize the default settings of the system according to your needs.
Note Only change the system settings if there is no disc in the DVD player or if the DVD player is not in operation.
To change your system settings, proceed as follows:
1 Press the SETUP button on the remote control or on the DVD player.
2 The Setup menu is displayed. In this menu, you can define general settings, loudspeaker settings, Digital settings as well as other default settings. You can leave the Setup menu at any time by pressing the SETUP button again.
3 Use the and buttons on the remote control or on the DVD player to select the desired submenu.
4 Use the and buttons on the remote control or on the DVD player to select the desired option within the submenu.
10.1 General Setup The illustration shows the options available in this submenu.
TV System To set the TV system type (NTSC, PAL, Auto).
Highlight the option using the and buttons. Switch to the option's setting by pressing ENTER or
.
Screen Saver To activate/deactivate screen saver
Highlight the option using the and buttons. Switch to the option's setting by pressing ENTER or
. Possible settings are ON (default) and OFF.
ODYS Slim TV 10
40
EN
TV Type To set the TV display mode.
Highlight the option using the and buttons. Switch to the option's setting by pressing ENTER or . Possible settings are: 4:3 PS, 4:3 LB and 16:9 (default). Use the and buttons to highlight the desired setting and confirm with ENTER. Press to exit the option's setting. Use the and buttons to highlight the desired setting and confirm with ENTER. Press to exit the option's setting.
Password The parental control feature is password-protected. You can use this option to change the password for the parental control feature. The default password is 0000.
Rating To set parental controls Depending on the disc, DVDs can be categorized by their contents. You can use this option to block certain scenes on a disc or the entire disc. Define a suitable category. The default setting is Adult.
Please note the password (refer above) must be entered in order to use this option.
Use the and buttons to highlight the desired setting and confirm with ENTER. Press to exit the option's setting.
Default Use this option to reset the device settings to their defaults.
Highlight the option using the and buttons. Switch to the option's setting Restore by pressing ENTER or . Press ENTER again to reset the device to its default settings.
Use the and buttons to highlight the desired setting and confirm with ENTER. Press to exit the option's setting.
ODYS Slim TV 10
41
EN
10.2 Language Setup
The illustration shows the options available in this submenu.
OSD Language To set the language for the on-screen menu. Highlight the option using the and buttons. Switch to the option's setting by pressing ENTER or . Possible settings are: English (default), German, Spanish, French etc.. Audio Lang To set the playback language
Highlight the option using the and buttons. Switch to the option's setting by pressing ENTER or
. Possible settings are English (default), French, Spanish, German etc..
Subtitle Lang To set the subtitle language
Highlight the option using the and buttons. Switch to the option's setting by pressing ENTER or . Possible settings are English, French, Spanish, German etc. and OFF (default).
Menu Lang To set the language for the disc menu. Highlight the option using the and buttons. Switch to the option's setting by pressing ENTER or
. Possible settings are English (default), French, Spanish, German etc.. Use the and buttons to highlight the desired setting and confirm with ENTER. Press to exit the option's setting.
ODYS Slim TV 10
42
EN
10.3 Audio Setup The illustration shows the options available in this submenu.
Audio Out (optional) In this menu, you set an analogue (SPDIF/OFF) or one of two optical digital audio standards (SPDIF/RAW and SPDIF/PCM).
Highlight the option using the and buttons. Switch to the option's setting by pressing ENTER or .
Key (tone pitch) Highlight the option using the and buttons. Switch to the option's setting by pressing ENTER or .
Use the and buttons to highlight the desired setting and confirm with ENTER. Press to exit the option's setting.
10.4 Video Setup
The illustration shows the options available in this submenu.
You only have access to the system setup when there is no disc in the DVD player.
Brightness Highlight the option using the and buttons. Switch to the option's setting by pressing ENTER or .
ODYS Slim TV 10
43
EN
Contrast Highlight the option using the and buttons. Switch to the option's setting by pressing ENTER or .
Saturation Highlight the option using the and buttons. Switch to the option's setting by pressing ENTER or .
Sharpness Highlight the option using the and buttons. Switch to the option's setting by pressing ENTER or .
Use the and buttons to highlight the desired setting and confirm with ENTER. Press to exit the option's setting.
ODYS Slim TV 10
44
EN
11 Glossary Dolby Digital Dolby Digital is a technology developed by Dolby Laboratories. Audio material that has been recorded in Dolby Digital format can be played back on up to 5.1 separate channels with excellent quality.
Letterbox image format (LB) In this format, the image of widescreen DVDs is displayed with black bars at the top and the bottom of the screen.
Pan&Scan image format (PS) In this format, the image of widescreen DVDs is cropped on the right and on the left.
Titles, chapters DVDs are divided into larger sections (titles) and smaller sections (chapters). The sections are numbered (title number, chapter number)
Track (CD) CDs are divided into sections, called tracks. The sections are numbered (track number).
JPEG JPEG is a commonly used image format with small file sizes and mini-
mal loss of quality. One disc can hold several hundred pictures that are saved in this format. To create a true digital picture album, you can create a picture CD in JPEG format.
ODYS Slim TV 10
45
EN
12 Trouble-shooting Carry out the problem-solving measures described in the following section before contacting Customer Support.
Turn off the DVD player immediately as soon as you suspect a malfunction. Unplug the power plug and check whether the DVD player is unusually warm or whether smoke is rising from it.
Problem Possible cause Remedy
Disc cover not closed Close disc cover
No disc inserted Insert disc
Disc inserted the wrong way Insert disc with label facing up
Disc dirty or deformed Clean disc, or insert other disc
Regional code of the player does not match the regional code of the DVD
Purchase DVD with corresponding regional code
The DVD player does not work
Moisture on lens Remove disc and turn off DVD player for at least two hours
Device not properly connected Check connexions and connect device in the correct way
Headphones connected (loudspeaker off)
Pull out the headphones
DVD sound settings incorrect Check sound settings and set sound correctly
No audio
Disc dirty or deformed Clean disc, or insert other disc
TV screen is off or in the incorrect video mode
Turn on LCD screen and/or set correct video mode
Device not properly connected Check connexions and connect device in the correct way
No video
Device is in AV IN mode Deactivate the AV-In signal input using the AV button
Poor video and/or audio quality
Disc dirty or deformed Clean disc, or insert other disc
Loop mode is switched on Exit the loop mode Repeated playback of a section Disc dirty or deformed Clean disc, or insert other disc
Obstacle between remote control and DVD player
Remove obstacle
Remote control not pointed at DVD player
Point remote control directly at DVD player
Remote control battery inserted the wrong way
Check the battery's polarity and, if necessary, insert battery correctly
Remote control does not work
Battery too low or completely discharged
Insert new battery
ODYS Slim TV 10
46
EN
Other possible causes for problems: Static discharges or other external interferences can cause the DVD player to malfunction. When this happens, disconnect the power plug from the mains socket and plug it back in.
If the problem persists, disconnect the device from the mains again and contact Customer Service or a repair shop.
ODYS Slim TV 10
47
EN
13 Specifications TFT display size 25.9 cm (10.2 inch)
Laser wave length 780/650 nm
Video standard PAL
Frequency range 20 Hz … 20 kHz ± 2.5 dB
Audio S/N ratio ≥ 70 dB
Channel separation ≥ 65 dB (1 kHz)
Dynamic range ≥ 70 dB (1 kHz)
Audio Out Analogue Audio Out
Ausgangspegel: 2.3 VP–P ± 0,2; Impedanz: 10 kΩ
Video Out Video Out Ausgangspegel: 1 VP–P ± 0,1; Impedanz: 75 Ω Asymmetrisch negativ
Mains voltage AC 100 … 240 V, 50/60 Hz
Power consumptio < 15 W
Dimensions (without battery
pack)
310 x 200 x 35 [mm] (L x H x W)
Weight (without battery pack) ca. 1000 g DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Warranty condition EN The following conditions comprise the requirements and scope of our warranty conditions and do not affect our legal and contractual warranty obligations.
We offer a warranty on our products in accordance with the following conditions:
1. Odys products are covered by a 24 month warranty. We will resolve damages or defects on Odys products free of charge within 12 months of the purchase date under the following warranty conditions. For any damage or defect determined later than 12 months after the purchase date, proof of a manufacturing fault must be submitted for repair under warranty. The warranty does not cover batteries and other parts, which are considered consumables, parts that break easily such as glass or plastic or defects based on normal wear and tear. There is no warranty obligation in the event of marginal differences compared to the target appearance and workmanship provided these have a negligible effect on the product's fitness for use, in the event of damage caused by chemical or electrochemical effects, by water or generally from abnormal conditions.
2. The warranty will be performed in such a way that we shall decide whether to repair the defective parts or to replace them with working parts free of charge. AXDIA reserves the right to exchange the product for a replacement product of equal value if the product that is sent in cannot be repaired within a reasonable time or at reasonable cost. The product can also be exchanged for a different model of the same value. Requests cannot be made for repairs to be carried out on site. Parts that have been replaced or exchanged become our property.
3. The warranty claim does not apply if repairs or other work is carried out by unauthorized persons or if our products are equipped with additional parts or accessories that are not approved for our products.
4. Warranties that have been activated do not cause the warranty period to be extended, nor do they trigger a new warranty period. The warranty period for any replacement parts installed ends with the warranty period for the entire product.
5. Any other or further claims are excluded, especially those for replacement due to damage caused outside of the product, provided there is no obligatory legal liability. We therefore accept no liability for accidental, indirect or other consequential damage of any kind, which leads to usage restrictions, data loss, loss of earnings or interruption to business.
Asserting a warranty claim 1. To make use of the warranty service, you must contact the AXDIA Service
Center by e-mail, fax or phone (see below for contact details). You can also use the service form on our website or on the back of the warranty conditions.
2. AXDIA Service Center will try to diagnose and solve your problem. If it is determined that a warranty claim exists, you will be given an RMA number (Return Material Authorization) and you will be asked to send the product to AXDIA.
ODYS Slim TV 10
49
EN
IMPORTANT: AXDIA will only accept parcels that have an RMA number.
Please observe the following when sending the product:
1. Send the product suitably packaged with carriage and insurance paid. Do not enclose any accessories with the products (no cables, CD's, memory cards, manuals, etc.), unless the AXDIA Service Centre specifies otherwise.
2. Mark the RMA number on the outside of the package in such a way that it is visible and clearly legible.
3. You must enclose a copy of the sales slip as proof of purchase. 4. Once AXDIA has received the product, it will meet its warranty obligations in
accordance with the warranty conditions and will return the product to the sender with carriage and insurance paid.
Service outside of warranty AXDIA can refuse any service claim made that is not covered by the warranty. If AXDIA agrees to provide a service outside the warranty, the customer will be invoiced for all repair and transport costs. AXDIA will not accept any packages that have not first been approved by AXDIA by means of an RMA (Return Material Authorization).
