www.trans-marservices.com

tel.: +359 52 97 98 98, cell.: +359 895 46 46 00, fax: +359 52 50 17 47te

l.: +

359

52

97 9

8 98

, ce

ll.: +

359

895

46 4

6 00

, fax

: +35

9 52

50

17 4

7TA

PES

56

www.trans-marservices.com

tel.: +359 52 97 98 98, cell.: +359 895 46 46 00, fax: +359 52 50 17 47te

l.: +

359

52

97 9

8 98

, ce

ll.: +

359

895

46 4

6 00

, fax

: +35

9 52

50

17 4

7G

REA

SES

AN

D L

UB

RIC

AN

TS56

OGS: Wireropelubricantwithefficientpenetratingproperties.Theprotectivecoatingwillresistdirect

rainfall and immersion in sea water.

OCL: Oven Chain Lubricant. A synthetic product developed for use where cleaning of the chain is

as important as lubrication. A non-carbonising high temperature gas resistant lubricant, harmless to

rubber seals. Also available in aerosol as SCS.

Moly OCL Based on OCL (above) but with colloidal Molybdenum Disulphide to help inhibit oxidisation

as well as increasing the lubricating value, thus minimising wear and friction.

Copaslip® is the original anti-seize compound. It is a very high temperature (up to 1100°C)

anti-seize assembly compound, bentone based non-melt grease with copper, polybutene, and

anti-corrosion additives.

Coppaslip ® Anti-seize Compound

Nikelslip is a nickel based extra high and low temperature anti-seize assembly compound. Containing

pure nickel, aluminium and graphite in a non-melt base with corrosion and oxidation inhibitors.

ADFisanairdryingfilm.PureMolybdenumDisulphideinanairdryingbondingresinateforuse

where oils/greases cannot be used (ie dust contamination). Ideal for pre-assembly treatment of

partstominimisedangersofseizure,gallingorscuffing.Availableinaerosolsorbulkliquidforuse

in suitable spray-guns.

Alumslip Anti-seize Assembly Compound is specially formulated to protect against seizure even

underextremeconditionsofpressureandtemperature.Alsoahighlyeffectivethreadlubricant

and protective. Designed for same applications as Copaslip® but where there is a prejudice against

the presence of copper. Temperature range up to 1100°C.

Molyslip AS40/AS60 Anti-Scuff Paste is a bedding-in paste, gelled lubricating oil with a high

proportion of MoS2.

– AS60 contains 60% of MoS2;

– AS40 contains 40% of MoS2 with graphite, rust and corrosion inhibitors.

Molyslip AS40/AS60 Anti-Scuff Paste, ADF, Alumslip, Nickelslip

High Per formance Specialist Lubricants

www.trans-marservices.com

tel.: +359 52 97 98 98, cell.: +359 895 46 46 00, fax: +359 52 50 17 47TA

PES

57

www.trans-marservices.com

tel.: +359 52 97 98 98, cell.: +359 895 46 46 00, fax: +359 52 50 17 47G

REA

SES AN

D LU

BR

ICA

NTS

57

High Performance Greases and Specialist Lubricants

EHT: Extra high temperature grease. Bentone grease with MoS2 and graphite. Formulated to ensure

that even if carbonisation occurs the residue will remain friable, with theMoS2 and graphite present to

maintain lubrication. Temperature range up to 250°C.

FMG: Food machinery grease (H1). The grease is gelled with inert bentone which ensures resistance to

water and steam as well as brine and fruit and vegetable juices.

HSB: High speed bearing grease. Lithium based with MoS2 and extreme pressure compounds.

Exceptional load carrying capacity with minimum friction and excellent anti-wear characteristics. Has a

steady working range from -30°C to 150°C.

LQG: All purpose lubricant with MoS2. Ability to penetrate when applied results in better lubrication than

ordinarygrease.Sufficientlyfluidtobesprayedontothemostinaccessibleplacesbutwillnotflowordrain

awaylikeanoil.Non-flingchainlubricant.Containsrustandcorrosioninhibitors.Availableinaerosolorbulk.

MBG: Bentone based (non-melt) molybdenised high-load grease. Helps to ensure freedom from bearing

failure in shock and over-load conditions. MBG allows you to increase lubrication intervals and to improve safety

margins. Ideal for cranes, conveyor systems, printing presses, water pumps, shackle bolts and many more.

OGL: Heavy duty bentone based open gear lubricant. Ideal for adverse weather conditions and for use

onslowmoving,heavilyloadedworkingsurfaces,itisanexceptionalfifthwheellubricantforheavyroad

transport. MoS2, graphite and extreme pressure additives. Completely water resistant, OGL provides a

protective coating which will not drip or drain.

Molyslip products® form a lubricating layer of Molybdenum Disulphide (MoS2) on metal surfaces:

– The MoS2 molecules arrange themselves into plates with a laminar structure in which each molybdenum

atom is sandwiched between two sulphur atoms. The sulphur atoms are attracted to metal and become

bonded on to each of the adjacent bearing surfaces. The sulphur-to-metal bonding is very strong.

– Thus, there are two bearing surfaces, each protectively plated by a layer of MoS2 molecules with

sliding or lubricating layers of molecules in between. In this way direct contact of metal-to-metal

surfaces is prevented, friction is considerably reduced, with the consequent elimination of local

heating, wear is inhibited and protection achieved even under extreme conditions of pressure and tº.

– The molecular thickness of MoS2 is such that there are approximately 40,000 lubricating or cleavage

planes in an MoS2filmonethousandthofaninchthick.

– The MoS2platingis,ineffect,aseparatinglayerofimmensestrength,greaterthantheyieldstressof

mostmetals;andinadditionitpossessesthelowcoefficientoffrictionof·03to·06whichgivesmore

efficientlubricationcombinedwiththisgreaterprotection.

Combat A88: First Aid for Metal is developed to save you time and money, COMBAT A88 cleans

dirt, grime, grease etc., lubricates and protects all metal components and surfaces against corrosion.

ContainsnoPTFE,siliconesorresinsandwillnotcausefilm‘build-up’.

Rusolvent rapidlypenetratesthefinestclearancesandcutsthroughrustandcorrosiontofreeand

releasecorrodedparts.Idelaforusewithreleaseofscaffoldingclampsandrustedbolts.

Electrocleaner NF isanon-flammablecleaningsolventforelectricalequipment,includingdynamos,

switch gear, relays etc.

MSS Multi-purpose Silicon Spray- is used in lubrication and as a mould release.

Workshop Products: Combat A88, Rusolvent, Electrocleaner NF, MSS