Date post: | 26-Dec-2015 |
Category: |
Documents |
Upload: | flabiano-ojendiz-aley |
View: | 250 times |
Download: | 11 times |
Huawei B932 modem
Step by Step Guide
2Go-To-Market Process
How do I insert the SIM card ?
3Go-To-Market Process
What does the LED lights on my modem means ?
4Go-To-Market Process
Where should I go to change my settings ?
1. Type 192.168.1.1 in your internet browser address bar. Click Go to be directed to this page
2. Enter the following :-
User ID : Admin
Password : admin
5Go-To-Market Process
Do I have to configure my modem ?
No. Your modem is pre-configured with the default settings. We DO NOT recommend that you
change the settings. If any change of configuration is required, please refer to the modem's
user manual.
6Go-To-Market Process
How do I set my profile ?
You can setup your profile by using the Quick Setup in the settings page
1. Go to your modem’s settings page and login ( refer to Question 3)
2. Click Quick Setup on the left hand bar. Click Next
3. Key in the following information and click Next:
Profile Name : Maxis 3G (default ) Dialup Number : *99#
PPP User Name : maxis PPP Password : wap
APN : Static : maxisbb IP Address : Dynamic
4. Choose the following :-
PPP Connection : On Demand PPP Authentication : CHAP
5. Click Finish
6. Click Continue
7. Click on Connection Status to check on the connection status.
Profile Settings : Maxis 3G
PPP Connection : On Demand
PPP Status : Connected
7Go-To-Market Process
2 3
How do I set my profile ?
4 5
8Go-To-Market Process
How do I set my profile ?
6 7
9Go-To-Market Process
How can I check my connection status ?
1. Go to your modem’s settings page and login ( refer to Question 3)
2. Click on Connection
3. Your connection will be displayed
10Go-To-Market Process
How do I change my modem’s password ?
1. Go to your modem’s settings page and login ( refer to Question 3)
2. Click Advanced Settings
3. Click System
4. Click Modify Password
5. Enter Current Password : admin
6. Enter New Password and Confirm Password
7. Click on Modify
11Go-To-Market Process
2 4
5
How do I change my modem’s password ?
12Go-To-Market Process
How do I enable my SIM Pin Number ?
1. Go to your modem’s settings page and login ( refer to Question 3)
2. Click Advanced Settings
3. Click SIM Settings
4. Click Pin Code Management
5. Choose Pin Code Operation : Enable
6. Enter Pin Code
7. Click Apply
8. Click Continue
13Go-To-Market Process
How do I disable my SIM Pin Number ?
1. Go to your modem’s settings page and login ( refer to Question 3)
2. Click Advanced Settings
3. Click SIM Settings
4. Click Pin Code Management
5. Choose Pin Code Operation : Disabled
6. Enter Pin Code
7. Click Apply
8. Click Continue
14Go-To-Market Process
How do I change My Network Settings ?
1. Make sure that your modem are not connected
2. Go to your modem’s settings page and login ( refer to Question 3)
3. Click Advanced Settings
4. Click Mobile Network Settings
5. Click Network Settings
6. Choose preferred network mode
7. Choose preferred network band selection
8. Click Apply and Continue
15Go-To-Market Process
How do I change My Network Settings ?
45
6