Date post: | 06-Jan-2016 |
Category: |
Documents |
Upload: | mark-carranza |
View: | 43 times |
Download: | 1 times |
of 10
HUAWEI NE40 Local Access Procedure
Page 1 of 2
Page 2 of 2
Tools Needed:
1. Laptap with Secure CRT Application 2. LAN Cable
Instruction 1:
Page 3 of 3
Locate MPU Module and select the ACTIVE (with indicator 2 LEDs ON)
Instruction 2:
Page 4 of 4
Connect LAN cable to ETH port and change the Laptap IP: 7.7.7.2/24 then conduct ping test to IP: 7.7.7.1
Instruction 3:
Page 5 of 5
Open Secure CRT application and click to quick connect setting as follow: Protocol: telnet Hostname: 7.7.7.1 Port: 23 or any no.
Instruction 4:
Page 6 of 6
Click connect and input the password as stated in the box accordingly.
Instruction 5:
Page 7 of 7
After connected all commands will be given/guided by NOC TX.
Sample:
Page 8 of 8
Sample
Page 9 of 9
Page 10 of 10
Thank You!
Kris Pacis