4 54 5

Reliable and highly versatile hardware using precision-made components for trouble-free operation.

Order KITS based on material and length of track:Kit No. Material Max Leaf SizeH100/6 steel track/6 ft. 96" x 36" x 2"H100/8 steel track/8 ft. 96" x 48" x 2"H100A/6 aluminum track/6 ft. 96" x 36" x 2"H100A/8 aluminum track/8 ft. 96" x 48" x 2"

OPTIONAL EXTRAS include:2815 281 brackets - 5 each287 track stop (bumper type)285 hanger for metal doors106R/94 roller guide (use w/94A)94A aluminum floor channel

F134 aluminum fascia - 1-3/4" thick doorsF138 aluminum fascia - 1-3/8" thick doors863 iron bow handle (5-1/4" x 1-3/4")400 aluminum flush pull (4-1/4" x 1-7/8", 5/8" mortise)414 aluminum flush pull (5-1/4" x 2-1/2", 3/4" mortise)333 aluminum flush bolt (6" x 1-3/8")

KITS (complete, ready to install) include:1 ea 280 or pre-drilled track, in steel or 280A aluminum, 6 or 8 foot lengths2 ea 284N nylon bodied, acetal wheel hangers1 ea 102N nylon guide2 ea 601H clip stops(Kit components can be ordered individually)

FOR SLIDING WOOD DOORS TO 100 lbs.

FACE FIXED SOFFIT FIXED

HUSKYSLIDING100

516"3

(84.1)

15 16"(33.3)

New 2802A Bypass Track for Husky Sliding Door Hardware

100 lbs.max door weight

281 (optional)

284N

102N9/16"

3/16"

3/4"

3-1/16" MAX2-5/8" MIN

1/2" MIN

96" MAX

280

284N

102N

F134Aluminum

Fascia(optional)

2-9/16"

1-3/16"

280A

284N

94A(optional)

106R/94(optional)

1/4"

2-1/4" MAX1-7/8" MIN

1"

1/4"

* F138 Fascia also available for 1-3/8" doors. Dimensions are 7/16" x 2-9/16"h.

280

HARDWARE PACK (no. "H100PACK") = KIT w/o track:2 ea 284N nylon bodied, acetal wheel hangers1 ea 102N nylon guide2 ea 601H clip stops

BYPASS PACK ALSO AVAILABLE (no. "HBP100PACK")

4 54 5

Reliable and highly versatile hardware using precision-made components for trouble-free operation.

Order KITS based on material and length of track:

Kit No. Material Max Leaf SizeH200/6 steel track/6 ft. 96" x 36" x 2"H200/8 steel track/8 ft. 96" x 48" x 2"H200A/6 aluminum track/6 ft. 96" x 36" x 2"H200A/8 aluminum track/8 ft. 96" x 48" x 2"

OPTIONAL EXTRAS include:2815 281 brackets - 5 each287 track stop (bumper type)285 hanger for metal doors106R/94 roller guide (use w/94A)94A aluminum floor channel

F134 aluminum fascia - 1-3/4" thick doorsF138 aluminum fascia - 1-3/8" thick doors863 iron bow handle (5-1/4" x 1-3/4")400 aluminum flush pull (4-1/4" x 1-7/8", 5/8" mortise)414 aluminum flush pull (5-1/4" x 2-1/2", 3/4" mortise)333 aluminum flush bolt (6" x 1-3/8")

KITS (complete, ready to install) include:1 ea 280 or pre-drilled track, in steel or 280A aluminum, 6 or 8 foot lengths2 ea 284 nylon bodied, needle bearing, acetal wheel hangers1 ea 102N nylon guide2 ea 601H clip stops(Kit components can be ordered individually)

FOR SLIDING WOOD OR METAL DOORS TO 200 lbs.

HUSKYSLIDING 200

516"3

(84.1)

15 16"(33.3)

New 2802A Bypass Track for Husky Sliding Door Hardware

FACE FIXED SOFFIT FIXED

200 lbs.max door weight

284

1/4"

3-1/16" MAX2-5/8" MIN

96" MAX

280

281 (optional)3/4"

1/2" MIN

102N9/16"

3/16"

2-1/4" MAX1-7/8" MIN F134

AluminumFascia

(optional)

2-9/16"

1-3/16"

280A

284

94A(optional)

106R/94(optional)

1/4"

* F138 Fascia also available for 1-3/8" doors. Dimensions are 7/16" x 2-9/16"h.

284

280

102N

1"

HARDWARE PACK (no. "H200PACK") = KIT w/o track:2 ea 284 nylon bodied, needle bearing, acetal wheel hangers1 ea 102N nylon guide2 ea 601H clip stops

BYPASS PACK ALSO AVAILABLE (no. "HBP200PACK")

6 76 7

GLASS WEIGHT

5/16" glass 3.95 lbs./sq. ft.3/8" glass 5.05 lbs./sq. ft.

Glass8-10 mm(5/16"-3/8")

Track280A

AntiLift Stop

Hanger 284D

ClipStop601H

Glass ClampLockNut

Guide608/610

(39.6)1916(25.4)

1

10mm (3/8") Only ForFixed Panel

(69.8)23 4

(41.3)15 8

1516

15 16

(95.3)33 4

FasciaF136

(57.2)21 4

(120.7)43 4

11 16 1

HUSKY GLASS

CAPACITY

Max. door weight: 165 lbs. (75kg) Max. door height: 7'10" (2400mm) Max. door width: 4'1" (1250mm)

Glass thickness: 5/16" (8mm) and 3/8" (10mm)

TECHNICAL INFORMATION

Track: 280A (extruded aluminum) Available in 6', 8', and 12' lengths

Brackets: Face fix 281 5-pack 2815Fascias: Soffit fixed track F136 Glass Clamp Kits: For glass panels from 5/16" (8mm) up to 8/75/1 Kit - 8mm 3/8" (10mm) 10/75/1 Kit - 10mm Guides: 5/16" (8mm) glass panels 608 - glass guide 3/8" (10mm) glass panels 610 - glass guide

Accessories: 601H retaining stop mounted within the track

APPLICATIONS

Husky offers a solution to lightweight glass applications such as office doors and small glass partitions.

DOOR TYPES

Glass panels of 5/16" (8mm) or 3/8" (10mm) thick-ness in tempered or laminated glass.

Glass Clamp kits contain: 2 hangers, 2 clamps, 2 end track stops and 2 floor mounted guides.

Note: When using glass clamps in combination with protective coatings for glass surfaces such as Clear Shield, ensure that the glass surface to be clamped is not treated with the Clear Shield coating.

6 76 7

PACER STRAIGHT SLIDING FOR TOP-HUNG WOOD AND METAL DOORS

Hanger57B

Hole 9mm

Bracket1B

FasciaF200

Channel94A

Roller Guide106N/94

Track 600

Hanger 56BX

AdjustmentNut

AdjustmentNut

RemovableRoller Guide104NX/94

RemovableRoller Guide

104N/94

PatentWasher

Channel94A

Hanger 56B

FasciaF160

Lock Nut

Lock Nut

(3/8")

(71.4)213 16

(30.1)13 16

(52.3)21 16

(55.6)23 16

(190.5)71 2

(20.6)

13 16

(20.6)

13 16

(14.2)

9 16

(25.4)1

(14.2)

9 16

DoorThickness

(49.2)(34.9)113 8 1516

(49.2)(20.6)113 16 1516

(30.1)(20.6)113 16 3 16

(20.6)13 16

(9.5)

3 8(12.7)

1 2(4.7)

3 16

(11/16")

Hole Requiredfor Fixing Guide

is 17mm

( 7/16")

Hole Required 11mm

( 7/16")

Hole Required 11mm

(149.2)5 7 16

(11.1)

7 16DIA.

(20.6)

13 16DIA.

(4.7)

3 16

8 98 9

Bracket 1BClip Stop 601

Track 600

Hanger 57B

Hanger52B

Flush Pull 400

Flush Bolt F3715

Guide106N Channel 94A

(1049.3)415 16

(33.3)15 16 (33.3)

15 16

(33.3)173 4

(33.3)173 4

(500)1911 16

(1981.2)

66(500)

1911 16

57BHanger

56BHanger

56BXHanger

RetainingStop 601

52BHanger

CAPACITY

Max. door weight: 440 lbs. (200kg)

Max. door height: 9'10" (3000mm)

Door thickness: 13/8"-115/16" (35mm-50mm)

APPLICATIONS

Combining performance and style with versatility, Pacer straight sliding in wood, glass, aluminum or metal is ideally suited for shop-fronts, offices and other stylish interiors.

DOOR TYPES

Wood doors for interior applications can be either solid or glazed. Metal doors can be of angle or box section. Aluminum is dependent on extrusion profile.

TECHNICAL INFORMATION

Track: Aluminum 600A Available in 6', 8', 10', and 16' lengths

Brackets: Face fix 1B Jointing bracket 1BX

Fascias: Soffit fixed track F160 with standard return Face fixed track F200 with standard return Fascia comes in a satin anodized aluminum finish in lengths of 6', 8' and 10'

Hangers: Wood doors 57B - concealed fixing Wood doors 52B - angle plate fixing Aluminum/Metal doors 57B - concealed fixing Metal doors 56B - angle frame Metal doors 56BX - box frame

Guides: Wood/Aluminum/Metal doors 89/2N - floor mounted guide Wood/Aluminum doors 106N/94 - concealed fixing Metal doors 104N/94 - angle frame Metal doors 104NX/94 - box frame

Guide Channel: Brass 94 Aluminum 94A

94 channel available in 4'11" (1.5 meter) and 9'10" (3 meter) lengths. 94A channel available in 6', 8', and 12' lengths.

Accessories: Retaining stop mounted within the track 601P

8 98 9

PACER GLASS

GLASS WEIGHT

3/8" glass 5.05 lbs./sq. ft.1/2" glass 6.4 lbs./sq. ft.

TECHNICAL INFORMATION

Track: 600A 600CFP combination profile - track and fixed glass panel 600FP fixed glass panel profile All profiles available in 6', 8', 10', and 16' lengths

Brackets: Face fix 1B Jointing bracket 1BX

Fascias: Soffit fixed track F160 with extruded return Face fixed track F200 with extruded return

Glass Clamp Kits: 5/16" (8mm) glass panels 165 lbs. (75kg) capacity 8/75 Kit 286 lbs. (130kg) capacity 8/130 Kit 3/8" (10mm) glass panels 165 lbs. (75kg) capacity 10/75 Kit 286 lbs. (130kg) capacity 10/130 Kit 1/2" (12mm) glass panels 165 lbs. (75kg) capacity 12/75 Kit 286 lbs. (130kg) capacity 12/130 Kit

Accessories: Sliding door lock for glass panels 618 (3/8" (10mm) and 1/2" (12mm) glass only) Track stop HH3/290 Retaining stop mounted 601P within the track

CAPACITY

Max. door weight: 165 lbs. (75kg) and 285 lbs. (130kg)

Max. door height: 9'10" (3000mm)

Max. door width: 9'10" (3000mm)

Glass thickness: 5/16", (8mm) 3/8" (10mm) and 1/2" (12mm)

APPLICATIONS

The Pacer Glass Door System accommodates both sliding and fixed door panels, making it ideal for interior dividers in offices and shops as well as modern buildings and complexes.

DOOR TYPES

Glass panels of 5/16" (8mm), 3/8" (10mm) or 1/2" (12mm) thickness in tempered or laminated glass. For fixed glass panels an integrated track profile (600CFP) is available, allowing a sliding panel to pass alongside the fixed panel. A further option available is a clip-on profile (600FP) which attaches directly to the side of the track. This allows a combina-tion of two fixed panels with a sliding panel.

Clip-on fascia is available for both soffit fix and face fix situations.

Glass Clamp kits contain: 2 hangers, 2 clamps, 2 end track stops and 2 floor mounted guides.

Note: When using glass clamps in the combination with protective coatings forglass surfaces such as Clear Shield, ensure that the glass surface to be clampedis not treated with the Clear Shield coating.

10 1110 11

PACER GLASS

Track600

FasciaF160

FixedGlassProfile600FP

Channel94A

CombinationProfile600CFP

Guide608610612

Packing

Face FixBracket

1B

Guide608610612

Channel94A

CombinationProfile600CFP

Fixed GlassProfile600FP

600FP

Track600A

FasciaFI60X

Glass8mm-10mm-12mm(5/16"-3/8"-1/2")

Glass8mm-10mm-12mm(5/16"-3/8"-1/2")

FasciaFI60X

FasciaF200X

FasciaF200

FasciaFI60X

FasciaFI60X

FasciaFI60X

3/16"

(36.5)17 16

(26.9)11 16

(25.4)1

(20.6)

13 16

(187.3)73 8

(36.5)17 16

(41.3)15 8

(20.6)

13 16

(5mm)

GLASS WEIGHT

3/8" glass 5.05 lbs./sq. ft.1/2" glass 6.4 lbs./sq. ft.

See capacity section on page 9 for min./max. heights and weights.

10 1110 11

Anti LiftStop

Gasket

GlassClamp

Track600A

Retaining Stop601P

Adjustable Nut Lock Nut

Glass SlidingDoor Lock

618

R=8

Glass Clamp130/8-10-12mm

Glass Clamp75/8-10-12mm

(5/16")

FasciaFI60X

(147.6)513 16

(55.6)2 3 16

(200)7 7 8

(63.5)21 2

(77.8)31 16

(31.8)21 4

3(60.3)

2 8

(1050)

Sliding Panel Fixed Glass

Lock 618

Channel 94AGuide608/610/612

Glass Clamp130/8-10-12mm Fascia F200X

Clip Stop 601P

BracketFace Fix 1B

(1BX)

415/16"

(25.4)1

(39.9)19 16

(63.5)21 2

(77.8)31 16

(69.9)23 4

(57.2)21 4

(92.3)33 4

21 2 31 16

(33.3)15 16

(33.3)15 16

(33.3)173 4

(33.3)173 4

(500)1911 16

(1981.2)66

(500)1911 16

(155.6)6 1 8

(100)315 16

(55.6)23 16

(125.4)415 16

Glass8mm-10mm-12mm(5/16"-3/8"-1/2")

(5/16"-3/8"-1/2")

(5/16"-3/8"-1/2")

(5/16"-3/8"-1/2")

12 1312 13

FLEXIROL

STRAIGHT SLIDING FOR TOP-HUNG WOOD, METAL OR GLASS DOORS

RollerGuide

106N/94

Channel94A

0-9/16"

Adjustable NutLockNut

3/8"-13/16"

Hanger556/57

Track 550A

Lock Nut

Hole toLock

Slotted HolexSlotted

Hole12x30

1/2" x13/16"

Channel94A

Guide89/2N

Suspended Ceiling BracketWith Vertical Adjustment3S/550

LockNut

HorizontalAdjustable

LockNut

ThreadedHoleM16(5/8")

FootOperated

Lock

BoltKeep

Hanger556

TopGlassClampFRP02

Face FixBracket 1A/550

GlassTemperedLaminated

10-12(3/8"-1/2")

BottomGlassClampFRP02

115/16"

7/8" x11/2"7/8"-11/2"

Pemko BrushWeatherstrip18061CNB

(100)315 16

(100)315 16

(6.3)1 4

(7.9)5 16

(12.7)1 2

(4.8)3 16

(20.6)13 16

(20.6)13 16

(100)315 16

(71.4)213 16

(73)2 7 8

1 2(12.7)

(73)2 7 8

(1000)39 3 8

(100)315 16

3 16(4.7)

(100)315 16

1 2(12.7)

1 2 3 16

(17.4)

11 16DIA.

DIA.

(33.3)15 16

DoorThickness

(39.7)19 16

(100)31516

12 1312 13

FLEXIROL

STRAIGHT SLIDING FOR TOP-HUNG WOOD, METAL OR GLASS DOORS

TECHNICAL INFORMATION

Track: 550ABrackets: Face fix 1A/550 Soffit fix 3S/550

Hangers: Metal doors 556 Wood doors 556/57 - concealed fixing Wood doors 556/52 - angle plate fixing

Glass Profiles: Glass profile FRP02

Guides: Wood and metal doors 89/2N Wood doors 106N/94 Metal doors 104N/94 Metal doors, extended version 104NX/94

Guide Channel: Brass 94 Aluminum 94A

Accessories: Flush pull 400 Flush bolt 333/454 Narrow flush bolt and keep F3715 and F3734 Trackstop HH3/301 Sliding door lock for glass panels 618 (3/8" (10mm) and 1/2" (12mm) glass only - see page 9)

(1049.3)415 16

Guide106N Channel 94A

Flush BoltF3715

Hanger556/57

Hanger556/52

Flush Pull400

HH3/301

Track 550

Face Fix Bracket 1A/550

(749.3)291 2

(749.3)291 2

(100)315 16

(100)315 16

(749.3)291 2

(749.3)291 2

X

GLASS WEIGHT

3/8" glass 5.05 lbs./sq. ft.1/2" glass 6.4 lbs./sq. ft.

CAPACITY

Max. door weight: 1100 lbs. (556 hanger) (500kg)

Max. door height: 19'8" (6000mm) - wood or metal framed 8'6" (2600mm) - 3/8" (10mm) tempered glass 13'2" (4000mm) - 1/2" (12mm) tempered glass 7'6" (2300mm) - 7/16" (10.76mm) laminated glass 8'2" (2500mm) - 1/2" (12.76mm) laminated glass

Max. door width: 19'8" (6000mm) - wood or metal framed 4'3" (1300mm) - 3/8" (10mm) tempered glass 4'11" (1500mm) - 1/2" (12mm) tempered glass 3' (900mm) - 7/16" (10.76mm) laminated glass 4' (1200mm) - 1/2" (12.76mm) laminated glass

Door thickness: 19/16" (40mm) - 315/16" (100mm) - wood or metal framed 3/8" (10mm) or 1/2" (12mm) - tempered glass

APPLICATIONS

Henderson straight sliding Flexirol is ideally suited to hotels, confer-ence centers, shop-fronts, showrooms or any site that requires high performance and attractive finish.

DOOR TYPES

Wood doors, metal doors of either angle frame or box section and aluminum extrusion. Tempered glass panels of either 3/8" (10mm) or 1/2" (12mm) thickness and laminated glass panels of either 7/16" (10.76mm) or 1/2" (12.76mm) thickness.

Note: when using glass clamps in combination with protective coatings for glass surfaces such as Clear Shield,ensure that the glass surface to be clamped is not treated with the Clear Shield coating.

52 53

INDUSTRIAL & STAINLESS STEEL

TRACK AND HARDWARE

Distributed in North America by PEMKO

54 5554 55

290-307FOR STRAIGHT SLIDING WOOD DOORS

Bracket1A

Hanger 53

Flush Pull 414

Track290-307

Guide 31S

* When using 280 or 290 track with doors 1-3/8" and thicker for a sidewall condition, a spacer must be used behind the bracket.All Dimensions in Feet and Inches

* *

COMPOSITION

Track: Cold-rolled steel section hot-dip galvanized.Brackets: Cast aluminum alloy or pressed steel. Suitable brackets available for single, double and triple run applications. Track ends closed by end-clips or closed brackets.Hangers: Fitted with maintenance-free precision needle bearings, sealed for life. Adjustable in height. Steel parts rustproofed by electrozinc plating or painted.Guides: Choice of bottom guide arrangements available. For heavier doors, always fit guide channel 97 and guides 1021/2 or 105.Door Stops& Accessories: In painted or galvanized steel.

APPLICATIONS

◆ The hardware is suitable for industrial and commercial applications, with single or double lines of track, in situations where the structure will support the weight of the door. Where this support is insufficient, "Sherwood" bottom roller hardware should be specified.◆ Openings may be covered by any number of doors sliding to one or both sides as required. (See plan details).◆ On large doors where individual access is required, a wicket door may be incorporated in one of the sliding units. ◆ Where doors are fitted externally, an overhang is recommended.

Door Type lbs./sq. ft.Hollow Metal 18 ga 4.6 lbs.Hollow Metal 16 ga 5.8 lbs.Flush Wood, Particleboard Core 4.8 lbs.Flush Wood, Stave Core 4.3 lbs.Flush Wood, Mineral Core 4.7 lbs.

Use the table below to estimate the approximate weight (pounds per square foot) of doors of different materials.

301290 307305301H

Five track sizes are available to suit doors

of different weights up to 4400 lbs.

For straight sliding wood doors, the following are included: ◆ Support brackets and track ◆ Hangers ◆ Guides ◆ Full range of For best operation the door width should not exceed 3/4 of the door height. Wood doors for industrial applications should be framed, ledged and braced.

For commercial applications wood doors may be of flush construc-tion, or fully glazed for show-rooms.

301/290 301H 305 307

1/23/4 1 1

15/8 313/16 51/2 61/8

1 22 25/81/2 1 1 11/2

11/16 13/8 11/2 13/4

35/32 43/8 61/8 7 9/16

3/4 15/16 11/2 1

1

11/16 11/2 17/8 13/4

21/8 31/8 35/8 35/83/8

3/81/2

1/25/16

1/25/8

5/81/2

5/83/4

3/47/16

3/43/4

280

3/4

19/16

3/41/25/8

3/8

8G

11/2 2 3 31/2 41/2

Track

A

B

C

D

E

F

G

H

J

K

M1

M2

M3

N

1 x Spacer 1 x Spacer

Fixing Hole M1

Fixing Hole M3

Hanger 53

Guide 31S Guide 31D

Hanger 52

Fixing Hole M2

105R

97

Accessories

54 5554 55

Answer the questions below and fax (800-283-4050) or call (800-283-9988) Pemko Customer Service for assistance with choosing your hardware. Or use the chart on the following pages to select appropriate hardware for your job.

56 5756 57

Max. Door Height up to 10 ft. up to 12 ft. up to 14 ft. up to 16 ft. up to 20 ft.

Max. Door Weight up to 300-400 lbs.* up to 600-800 lbs.* up to 1000 lbs. up to 1500 lbs. up to 4400 lbs.

Door Thickness 11/2-2" 13/4-21/4" 13/4-21/4" 13/4-21/4" 23/8-23/4"

KIT NUMBER 290 301 301H 305 307Track

Brackets (one bracket for every three feet of track)

Hangers (two per door)

Stops (two per door)

Guides (three per door)

Guide Channel

Flush Pulls

Bow Handles

290-307Use the chart below to select appropriate hardware for your job. Or answer the questions on the previous page and fax (800-283-4050) or call (800-283-9988) Pemko Customer Service for assistance with choosing your hardware.

9A/290sidewall-use for ample installation space

3A/290overhead-use for

limited installation space

4A/290overhead-use for ample installation space

57A/S 600 lb. door*

door top mount

105roller guide

5/290sidewall dual track

53K/N 300 lb. door*door top mount w/door face flanges

53K/S200 400 lb. door*door top mount w/door face flanges

57K/N300 lb. doordoor top mount

106Runder guide roller

463 bow handle - 61/4"

414 flush pull

1A/290sidewall-use for

limited installation space

31Ssingle wall mounted stay roller

126HD/Aheavy duty ground stay roller

126ground stay roller

4R/290Soverhead-suspended

94A or 94B aluminum or brass guide channel

89 steel guide channel

97 steel guide channel

52K/N300 lb. doordoor top/edge mount

HARDWARE KIT FOR STRAIGHT SLIDING WOOD DOORS (complete, ready to insta l l )

57A/N 800 lb. door*

door top mount

53A/S600 lb. door*

door top mount w/door face flanges

53A/N 800 lb. door*

door top mount w/door face flanges

52A/N 800 lb. doordoor top/edge mount

31Ssingle wall mounted stay roller

463 bow handle - 61/4"

414 flush pull

863 bow handle - 51/4"

1A/301sidewall-use for

limited installation

space

3A/301overhead-use for

limited installation space

4A/301 overhead-use for ample installation space

4R/301Soverhead-suspended

5/301 sidewall double track

9A/301 sidewall-use for ample installation space

290 301

52A/S600 lb. doordoor top/edge mount

31Ddouble wall mounted stay roller

Jointing Brackets available for joining two pieces of track at bracet (i.e. 1AX/301)

97 steel guide channel

109double fastener single wall or ground stop

HH3/290track mounted double fastener stop

107 single wall stop-double rubber buffers

HH3/301track mounted double fastener stop

56 5756 57

Max. Door Height up to 10 ft. up to 12 ft. up to 14 ft. up to 16 ft. up to 20 ft.

Max. Door Weight up to 300-400 lbs.* up to 600-800 lbs.* up to 1000 lbs. up to 1500 lbs. up to 4400 lbs.

Door Thickness 11/2-2" 13/4-21/4" 13/4-21/4" 13/4-21/4" 23/8-23/4"

KIT NUMBER 290 301 301H 305 307Track

Brackets (one bracket for every three feet of track)

Hangers (two per door)

Stops (two per door)

Guides (three per door)

Guide Channel

Flush Pulls

Bow Handles

290-307Use the chart below to select appropriate hardware for your job. Or answer the questions on the previous page and fax (800-283-4050) or call (800-283-9988) Pemko Customer Service for assistance with choosing your hardware.

5/305 sidewall double track

3A/305 overhead-use for

limited installation space

4R/305Soverhead-suspended

1/307/Ssidewall-use for

limited installation space

5/307/Ssidewall double track

4R/307Soverhead-suspended

HARDWARE KIT FOR STRAIGHT SLIDING WOOD DOORS (complete, ready to insta l l )

52A/N 1000 lb. doordoor top/edge mount

57A/N 1000 lb. door

door top mount53A/N 1000 lb. doordoor top mount w/door face flanges

31Ssingle wall mounted stay roller

463 bow handle - 61/4"

414 flush pull

31Ssingle wall mounted stay roller

463 bow handle - 61/4"

414 flush pull

52C/S 1500 lb. doordoor top/edge mount

57C/S 1500 lb. door

door top mount53C/S 1500 lb. doordoor top mount w/door face flanges

1A/305sidewall-use for

limited installation space

31Ssingle wall mounted stay roller

464 bow handle - 101/4"

413 flush pull

1A/301sidewall-use for

limited installation

space

3A/301overhead-use for

limited installation space

4A/301 overhead-use for ample installation space

4R/301Soverhead-suspended

5/301 sidewall double track

9A/301 sidewall-use for ample installation space

3/307Soverhead-use for

limited installation space

4/307Soverhead-use for ample installation space

53FJ/S 4400 lb. doordoor top mount w/door face flanges

305301H 307

31Ddouble wall mounted stay roller

31Ddouble wall mounted stay roller

31Ddouble wall mounted stay roller

4A/305overhead-use for ample installation space

97 steel guide channel 97 steel guide channel 97 steel guide channel89 steel guide channel

89 steel guide channel

107 single wall stop-double rubber buffers not required

107 single wall stop-double rubber buffers

HH3/301track mounted double fastener stop

58 5958 59

290-307FOR STRAIGHT SLIDING METAL DOORS

Bracket 1A

Hanger 56

Bow Handle

463

Track290-307

Guide 31S

* When using 280 or 290 track with doors 1-3/8" and thicker for a sidewall condition, a spacer must be used behind the bracket.All Dimensions in Feet and Inches

*

COMPOSITION

Track: Cold-rolled steel section hot-dip galvanized.Brackets: Cast aluminum alloy or pressed steel. Suitable brackets available for single, double and triple run applications. Track ends closed by end-clips or closed brackets.Hangers: Fitted with maintenance-free precision needle bearings, sealed for life. Adjustable in height. Steel parts rustproofed by electrozinc plating or painted.Guides: Choice of bottom guide arrangements available. For heavier doors, always fit guide channel 97 and guides 104P or 104PX.Door Stops & Accessories: In painted or galvanized steel.

APPLICATIONS

◆ The hardware is suitable for industrial and commercial applications, with single or double lines of track, in situations where the structure will support the weight of the door. Where this support is insufficient, "Sherwood" bottom roller hardware should be specified.◆ Openings may be covered by any number of doors sliding to one or both sides as required. (See plan details).◆ On large doors where individual access is required, a wicket door may be incorporated in one of the sliding units. ◆ Where doors are fitted externally, an overhang is recommended.

Door Type lbs./sq. ft.Hollow Metal 18 ga 4.6 lbs.Hollow Metal 16 ga 5.8 lbs.Flush Wood, Particleboard Core 4.8 lbs.Flush Wood, Stave Core 4.3 lbs.Flush Wood, Mineral Core 4.7 lbs.

Use the table below to estimate the approximate weight (pounds per square foot) of doors of different materials.

301290 307305301H

Five track sizes are available to suit doors

of different weights up to 4400 lbs.

For straight sliding metal doors, the following are included: ◆ Support brackets and track ◆ Hangers ◆ Guides ◆ Full range of accessoriesFor best operation the door width should not exceed 3/4 of the door height. Door construction is normally framed and braced using steel angle section then clad with steel sheet or other suitable material. When steel box section is used, specify hangers with extended strap bolts and elongated guides. If alumi-num framed doors are to be used, type of hanger required will depend on door section.

1 x Spacer

Fixing Hole M1

Fixing Hole M3

Hanger 56

56X

Fixing Hole M2

Guide 31S

1 x Spacer *

104PX

97299

89Fixing Hole M4

301/290 301H 305 307

1/23/4 1 1

15/8 313/16 51/2 61/8

1 22 25/81/2 1 1 11/2

11/16 13/8 11/2 13/4

35/32 43/8 61/8 7 9/16

3/4 15/16 11/2 1

11/16 11/2 17/8 13/4

21/8 31/8

1/81/8

35/8 35/83/8

3/81/2

1/25/16

1/25/8

5/81/2

5/83/4

3/47/16

11/16

11/1611/16

11/1613/16

13/16

11/16

280

1/4

19/16

3/41/25/8

3/8

8G

Track

A

B

C

D

E

F

G

H

J

K

M1

M2

M3

M4

11/2 2 3 31/2 41/2N

51/2 51/251/243/8P

58 5958 59

Answer the questions below and fax (800-283-4050) or call (800-283-9988) Pemko Customer Service for assistance with choosing your hardware. Or use the chart on the following pages to select appropriate hardware for your job.

60 6160 61

Max. Door Height up to 10 ft. up to 12 ft. up to 14 ft. up to 16 ft. up to 20 ft.

Max. Door Weight up to 300-400 lbs.* up to 600-800 lbs.* up to 1000 lbs. up to 1500 lbs. up to 4400 lbs.

Door Thickness 11/2-2" 13/4-21/4" 13/4-21/4" 13/4-21/4" 23/8-23/4"

KIT NUMBER 290 301 301H 305 307Track

Brackets (one bracket for every three feet of track)

Hangers (two per door)

Stops (two per door)

Guides (three per door)

Guide Channel

Flush Pulls

Bow Handles

290-307Use the chart below to select appropriate hardware for your job. Or answer the questions on the previous page and fax (800-283-4050) or call (800-283-9988) Pemko Customer Service for assistance with choosing your hardware.

9A/290sidewall-use for ample installation space

3A/290overhead-use for

limited installation space

4A/290overhead-use for ample installation space

57A/S 600 lb. door*

door top mount

105roller guide

5/290sidewall dual track

56K/S 300 lb. door*door top mount w/door face flanges

56K/S200 400 lb. door*door top mount w/door face flanges

57K/N300 lb. doordoor top mount

106Runder guide roller

463 bow handle - 61/4"

1A/290sidewall-use for

limited installation space

31Ssingle wall mounted stay roller

126HD/Aheavy duty ground stay roller

126ground stay roller

4R/290Soverhead-suspended

56KX/S300 lb. doordoor top/edge mount

HARDWARE KIT FOR STRAIGHT SLIDING METAL DOORS (complete, ready to insta l l )

31Ssingle wall mounted stay roller

31Ddouble wall mounted stay roller

463 bow handle - 61/4"863 bow handle - 51/4"

1A/301sidewall-use for

limited installation

space

3A/301overhead-use for

limited installation space

4A/301 overhead-use for ample installation space

4R/301Soverhead-suspended

5/301 sidewall double track

9A/301 sidewall-use for ample installation space

290 301

414 flush pull 414 flush pull

Jointing Brackets available for joining two pieces of track at bracet (i.e. 1AX/301)

109double fastener single wall or ground stop

HH3/290track mounted double fastener stop

107 single wall stop-double rubber buffers

HH3/301track mounted double fastener stop

94A or 94B aluminum or brass guide channel

89 steel guide channel

97 steel guide channel 97 steel guide channel 97 steel guide channel 97 steel guide channel 97 steel guide channel89 steel guide channel

89 steel guide channel

57A/N 800 lb. door*

door top mount

56AX/N 800 lb. door*door top mount w/door face flanges

56A/S600 lb. doordoor top/edge mount

56A/N 800 lb. door*door top/edge mount

56AX/S600 lb. door*

door top mount w/door face flanges

60 6160 61

Max. Door Height up to 10 ft. up to 12 ft. up to 14 ft. up to 16 ft. up to 20 ft.

Max. Door Weight up to 300-400 lbs.* up to 600-800 lbs.* up to 1000 lbs. up to 1500 lbs. up to 4400 lbs.

Door Thickness 11/2-2" 13/4-21/4" 13/4-21/4" 13/4-21/4" 23/8-23/4"

KIT NUMBER 290 301 301H 305 307Track

Brackets (one bracket for every three feet of track)

Hangers (two per door)

Stops (two per door)

Guides (three per door)

Guide Channel

Flush Pulls

Bow Handles

290-307Use the chart below to select appropriate hardware for your job. Or answer the questions on the previous page and fax (800-283-4050) or call (800-283-9988) Pemko Customer Service for assistance with choosing your hardware.

5/305 sidewall double track

3A/305 overhead-use for

limited installation space

4R/305Soverhead-suspended

1/307/Ssidewall-use for

limited installation space

5/307/Ssidewall double track

HARDWARE KIT FOR STRAIGHT SLIDING METAL DOORS (complete, ready to insta l l )

56A/N 1000 lb. doordoor top/edge mount

57A/N 1000 lb. door

door top mount

31Ssingle wall mounted stay roller

463 bow handle - 61/4"

31Ssingle wall mounted stay roller

463 bow handle - 61/4"

56C/S 1500 lb. doordoor top/edge mount

57C/S 1500 lb. door

door top mount

1A/305sidewall-use for

limited installation space

31Ssingle wall mounted stay roller

464 bow handle - 101/4"

413 flush pull

1A/301sidewall-use for

limited installation

space

3A/301overhead-use for

limited installation space

4A/301 overhead-use for ample installation space

4R/301Soverhead-suspended

5/301 sidewall double track

9A/301 sidewall-use for ample installation space

3A/307overhead-use for

limited installation space

4A/307overhead-use for ample installation space

56FJ/S 4400 lb. doordoor top mount w/door face flanges -angle frame

305301H 307

31Ddouble wall mounted stay roller

31Ddouble wall mounted stay roller

31Ddouble wall mounted stay roller

414 flush pull414 flush pull

4A/305overhead-use for ample installation space

4R/307Soverhead-suspended

107 single wall stop-double rubber buffers not required

107 single wall stop-double rubber buffers

HH3/301track mounted double fastener stop

94A or 94B aluminum or brass guide channel

89 steel guide channel

97 steel guide channel 97 steel guide channel 97 steel guide channel 97 steel guide channel 97 steel guide channel89 steel guide channel

89 steel guide channel

56FJX/S 4400 lb. doordoor top mount -box frame

56CX/S1500 lb. doordoor top mount

56AX/N 1000 lb. doordoor top mount w/door face flanges

98 9998 99

TitanFOR SLIDING CANTILEVER GATES

Top Guides

TrackEnd GuideEnd

RollerRoller

Overhang

APPLICATIONS

◆ Gates into security-fenced areas (e.g. airports, storage), factory entrances, condominiums and residences. ◆ Gates over railway lines or uneven – surface roadways.◆ These gates are best constructed in welded steel square tubing to your own design giving better security than round tube and chainlink gates. ◆ Opening width and gate weight determine the length of overhang required and track and roller type to use.◆ There should be enough space available to slide the gate and overhang clear of the opening. ◆ Rollers should be mounted on substantial concrete footings, as wide apart as possible on the overhang. ◆ Titan can also be used for doors, where no overhead support exists for a sectional or shutter door to be fitted.

COMPOSITION

Track: Cold-rolled galvanized steel section in 20 ft. lengths.Rollers: Steel wheels with precision ball bearings mounted on height-adjustable ground plates. All parts are galvanized or painted.End Rollers: Steel ball bearing wheel with clamp-plate for rail-end fixing. All parts galvanized.End Guide: Wall or post-fixed pair of adjustable nylon guide rollers. Steel parts are galvanized. Alternative guides available.

Titan cantilever hardware suits sliding metal gates. The track is fixed to the base of the gate, which runs on a pair of rollers ground-fixed to one side of the open-ing. This leaves the roadway free from any obstructions, especially top or bot-tom rails, which easily get blocked, damaged or can upset forklift loads. The heavy-duty rollers are hidden within the rail for maximum security and weather protection.

Two track sizes are available to suit openings up to 32

ft. wide.

700 (not shown) holds up to 1200 lbs. if power operated.

710 (not shown) holds up to 2000 lbs. if manually operated

98 9998 99

HOW TO CHOOSE YOUR HARDWARE: Choose gate type, manual or automatic. Read across to required gate opening width, then read downward to estimated gate weight. Shaded area indicates roller type and overhang length required.

Use a pair of rollers No. 704 and track No. 700 Use a pair of rollers No. 708 and track No. 700 Use a pair of rollers No. 718 and track No. 710

MANUAL OPENING WIDTH (ft)

AUTOMATIC OPENING WIDTH (ft)

GATE WEIGHT: 400lbs. 600lbs. 800lbs. 1000lbs. 1200lbs. 1400lbs. 1600lbs. 1800lbs. 2000lbs.

GATE WEIGHT: 300lbs. 400lbs. 500lbs. 600lbs. 700lbs. 800lbs. 900lbs. 1000lbs. 1100lbs. 1200lbs.

110 111110 1113S/5501A/550

280 A

600 FP 600 CFP

45 O

Pacer Curve 600 C

Face Fix Bracket 281

(Bottom View) (Bottom View)

550 Track 600 Track52

55.5

100

Bolt NotSuppliedby PCH

Bolt NotSuppliedby PCH

Pacer Switch 45R/600 Pacer Switch 45L/600350 350

14.0

Thr

ough

out

R 374

91

79.5

85.5

38

Jointing Bracket 1BX

fl 9

Bracket 1B

20

fl 9

13

80

7

40

25

20

40

34

33

24

34

48

40

48

34

70

13

140

70

70

100-1000

100

6

6

29

20

20

29

2

73

98

(15/16")

(15/16")

(33/8")

(11/2")

(15/16")

(21/16")

(23/16")

(31/8")

(39/16")

(19/16")

(133/4") (133/4")

(17/8")

(15/16")

(13/16")

(1/2")

(19/16")

(3/8")

(17/8")

(15/16")

(23/4")

(1/2")(3/8")

(315/16") (31/8")

(315/16")

(315/16"-393/8")

(23/4")

(23/4")

(51/2")

(19/16")

(1")(1/4")

(13/16")

(13/16")

(11/8")

(1/4")

(1/4") (11/8")

(13/16")

(1/16")

(37/8")

(27/8")

Pacer

Bracket 1B

Pacer

Jointing Bracket 1BX

B R AC K E T S

v

3S/5501A/550

280 A

600 FP 600 CFP

45 O

Pacer Curve 600 C

Face Fix Bracket 281

(Bottom View) (Bottom View)

550 Track 600 Track52

55.5

100

Bolt NotSuppliedby PCH

Bolt NotSuppliedby PCH

Pacer Switch 45R/600 Pacer Switch 45L/600350 350

14.0

Thr

ough

out

R 374

91

79.5

85.5

38

Jointing Bracket 1BX

fl 9

Bracket 1B

20

fl 9

13

80

7

40

25

20

40

34

33

24

34

48

40

48

34

70

13

140

70

70

100-1000

100

6

6

29

20

20

29

2

73

98

(15/16")

(15/16")

(33/8")

(11/2")

(15/16")

(21/16")

(23/16")

(31/8")

(39/16")

(19/16")

(133/4") (133/4")

(17/8")

(15/16")

(13/16")

(1/2")

(19/16")

(3/8")

(17/8")

(15/16")

(23/4")

(1/2")(3/8")

(315/16") (31/8")

(315/16")

(315/16"-393/8")

(23/4")

(23/4")

(51/2")

(19/16")

(1")(1/4")

(13/16")

(13/16")

(11/8")

(1/4")

(1/4") (11/8")

(13/16")

(1/16")

(37/8")

(27/8")

3S/5501A/550

280 A

600 FP 600 CFP

45 O

Pacer Curve 600 C

Face Fix Bracket 281

(Bottom View) (Bottom View)

550 Track 600 Track52

55.5

100

Bolt NotSuppliedby PCH

Bolt NotSuppliedby PCH

Pacer Switch 45R/600 Pacer Switch 45L/600350 350

14.0

Thr

ough

out

R 374

91

79.5

85.5

38

Jointing Bracket 1BX

fl 9

Bracket 1B

20

fl 9

13

80

7

40

25

20

40

34

33

24

34

48

40

48

34

70

13

140

70

70

100-1000

100

6

6

29

20

20

29

2

73

98

(15/16")

(15/16")

(33/8")

(11/2")

(15/16")

(21/16")

(23/16")

(31/8")

(39/16")

(19/16")

(133/4") (133/4")

(17/8")

(15/16")

(13/16")

(1/2")

(19/16")

(3/8")

(17/8")

(15/16")

(23/4")

(1/2")(3/8")

(315/16") (31/8")

(315/16")

(315/16"-393/8")

(23/4")

(23/4")

(51/2")

(19/16")

(1")(1/4")

(13/16")

(13/16")

(11/8")

(1/4")

(1/4") (11/8")

(13/16")

(1/16")

(37/8")

(27/8")

3S/5501A/550

280 A

600 FP 600 CFP

45 O

Pacer Curve 600 C

Face Fix Bracket 281

(Bottom View) (Bottom View)

550 Track 600 Track52

55.5

100

Bolt NotSuppliedby PCH

Bolt NotSuppliedby PCH

Pacer Switch 45R/600 Pacer Switch 45L/600350 350

14.0

Thr

ough

out

R 374

91

79.5

85.5

38

Jointing Bracket 1BX

fl 9

Bracket 1B

20

fl 9

13

80

7

40

25

20

40

34

33

24

34

48

40

48

34

70

13

140

70

70

100-1000

100

6

6

29

20

20

29

2

73

98

(15/16")

(15/16")

(33/8")

(11/2")

(15/16")

(21/16")

(23/16")

(31/8")

(39/16")

(19/16")

(133/4") (133/4")

(17/8")

(15/16")

(13/16")

(1/2")

(19/16")

(3/8")

(17/8")

(15/16")

(23/4")

(1/2")(3/8")

(315/16") (31/8")

(315/16")

(315/16"-393/8")

(23/4")

(23/4")

(51/2")

(19/16")

(1")(1/4")

(13/16")

(13/16")

(11/8")

(1/4")

(1/4") (11/8")

(13/16")

(1/16")

(37/8")

(27/8")

3S/5501A/550

280 A

600 FP 600 CFP

45 O

Pacer Curve 600 C

Face Fix Bracket 281

(Bottom View) (Bottom View)

550 Track 600 Track52

55.5

100

Bolt NotSuppliedby PCH

Bolt NotSuppliedby PCH

Pacer Switch 45R/600 Pacer Switch 45L/600350 350

14.0

Thr

ough

out

R 374

91

79.5

85.5

38

Jointing Bracket 1BX

fl 9

Bracket 1B

20

fl 9

13

80

7

40

25

20

40

34

33

24

34

48

40

48

34

70

13

140

70

70

100-1000

100

6

6

29

20

20

29

2

73

98

(15/16")

(15/16")

(33/8")

(11/2")

(15/16")

(21/16")

(23/16")

(31/8")

(39/16")

(19/16")

(133/4") (133/4")

(17/8")

(15/16")

(13/16")

(1/2")

(19/16")

(3/8")

(17/8")

(15/16")

(23/4")

(1/2")(3/8")

(315/16") (31/8")

(315/16")

(315/16"-393/8")

(23/4")

(23/4")

(51/2")

(19/16")

(1")(1/4")

(13/16")

(13/16")

(11/8")

(1/4")

(1/4") (11/8")

(13/16")

(1/16")

(37/8")

(27/8")

3S/5501A/550

280 A

600 FP 600 CFP

45 O

Pacer Curve 600 C

Face Fix Bracket 281

(Bottom View) (Bottom View)

550 Track 600 Track52

55.5

100

Bolt NotSuppliedby PCH

Bolt NotSuppliedby PCH

Pacer Switch 45R/600 Pacer Switch 45L/600350 350

14.0

Thr

ough

out

R 374

91

79.5

85.5

38

Jointing Bracket 1BX

fl 9

Bracket 1B

20

fl 9

13

80

7

40

25

20

40

34

33

24

34

48

40

48

34

70

13

140

70

70

100-1000

100

6

6

29

20

20

29

2

73

98

(15/16")

(15/16")

(33/8")

(11/2")

(15/16")

(21/16")

(23/16")

(31/8")

(39/16")

(19/16")

(133/4") (133/4")

(17/8")

(15/16")

(13/16")

(1/2")

(19/16")

(3/8")

(17/8")

(15/16")

(23/4")

(1/2")(3/8")

(315/16") (31/8")

(315/16")

(315/16"-393/8")

(23/4")

(23/4")

(51/2")

(19/16")

(1")(1/4")

(13/16")

(13/16")

(11/8")

(1/4")

(1/4") (11/8")

(13/16")

(1/16")

(37/8")

(27/8")

T R AC K , I N T E R S E C T S A N D C U RV E S

FLEXIROL 555 JUNCTIONS/INTERSECTS

Husky Pacer Pacer Pacer Flexirol

�

����������������������

�������

����������

��������������������������

�������������

�������

�������������

�������

������

�������������

�������

90ß 90ß90ß

90ß Elbow

551H/90 Jointing Strip

H90/550

90ß T-Junction

552H/90 Track/Hanger Guide

JointingStrip

551/180

JointingStrip

551H/90

TW/550

JointingStrip

551/180

FLEXIROL 556 JUNCTIONS/INTERSECTS(Top Views)

PACER CURVES/INTERSECTS(Bottom Views)

3S/5501A/550

280 A

600 FP 600 CFP

45 O

Pacer Curve 600 C

Face Fix Bracket 281

(Bottom View) (Bottom View)

550 Track 600 Track52

55.5

100

Bolt NotSuppliedby PCH

Bolt NotSuppliedby PCH

Pacer Switch 45R/600 Pacer Switch 45L/600350 350

14.0

Thr

ough

out

R 374

91

79.5

85.5

38

Jointing Bracket 1BX

fl 9

Bracket 1B

20

fl 9

13

80

7

40

25

20

40

34

33

24

34

48

40

48

34

70

13

140

70

70

100-1000

100

6

6

29

20

20

29

2

73

98

(15/16")

(15/16")

(33/8")

(11/2")

(15/16")

(21/16")

(23/16")

(31/8")

(39/16")

(19/16")

(133/4") (133/4")

(17/8")

(15/16")

(13/16")

(1/2")

(19/16")

(3/8")

(17/8")

(15/16")

(23/4")

(1/2")(3/8")

(315/16") (31/8")

(315/16")

(315/16"-393/8")

(23/4")

(23/4")

(51/2")

(19/16")

(1")(1/4")

(13/16")

(13/16")

(11/8")

(1/4")

(1/4") (11/8")

(13/16")

(1/16")

(37/8")

(27/8")

3S/5501A/550

280 A

600 FP 600 CFP

45 O

Pacer Curve 600 C

Face Fix Bracket 281

(Bottom View) (Bottom View)

550 Track 600 Track52

55.5

100

Bolt NotSuppliedby PCH

Bolt NotSuppliedby PCH

Pacer Switch 45R/600 Pacer Switch 45L/600350 350

14.0

Thr

ough

out

R 374

91

79.5

85.5

38

Jointing Bracket 1BX

fl 9

Bracket 1B

20

fl 9

13

80

7

40

25

20

40

34

33

24

34

48

40

48

34

70

13

140

70

70

100-1000

100

6

6

29

20

20

29

2

73

98

(15/16")

(15/16")

(33/8")

(11/2")

(15/16")

(21/16")

(23/16")

(31/8")

(39/16")

(19/16")

(133/4") (133/4")

(17/8")

(15/16")

(13/16")

(1/2")

(19/16")

(3/8")

(17/8")

(15/16")

(23/4")

(1/2")(3/8")

(315/16") (31/8")

(315/16")

(315/16"-393/8")

(23/4")

(23/4")

(51/2")

(19/16")

(1")(1/4")

(13/16")

(13/16")

(11/8")

(1/4")

(1/4") (11/8")

(13/16")

(1/16")

(37/8")

(27/8")

3S/5501A/550

280 A

600 FP 600 CFP

45 O

Pacer Curve 600 C

Face Fix Bracket 281

(Bottom View) (Bottom View)

550 Track 600 Track52

55.5

100

Bolt NotSuppliedby PCH

Bolt NotSuppliedby PCH

Pacer Switch 45R/600 Pacer Switch 45L/600350 350

14.0

Thr

ough

out

R 374

91

79.5

85.5

38

Jointing Bracket 1BX

fl 9

Bracket 1B

20

fl 9

13

80

7

40

25

20

40

34

33

24

34

48

40

48

34

70

13

140

70

70

100-1000

100

6

6

29

20

20

29

2

73

98

(15/16")

(15/16")

(33/8")

(11/2")

(15/16")

(21/16")

(23/16")

(31/8")

(39/16")

(19/16")

(133/4") (133/4")

(17/8")

(15/16")

(13/16")

(1/2")

(19/16")

(3/8")

(17/8")

(15/16")

(23/4")

(1/2")(3/8")

(315/16") (31/8")

(315/16")

(315/16"-393/8")

(23/4")

(23/4")

(51/2")

(19/16")

(1")(1/4")

(13/16")

(13/16")

(11/8")

(1/4")

(1/4") (11/8")

(13/16")

(1/16")

(37/8")

(27/8")

H90/550

45R/550Intersect

Right

45L/550Intersect

Left

(Top View) (Top View)

551/180

551H/45551H/135

Track Hanger Guide 552H/135

551/180

551H/135 551/180551H/135

45R/55045R/550Intersect

Right

45L/550Intersect

Left

(Top View) (Top View)

551/180

551H/45551H/135

Track Hanger Guide 552H/135

551/180

551H/135 551/180551H/135

45R/550Intersect

Right

45L/550Intersect

Left

(Top View) (Top View)

551/180

551H/45551H/135

Track Hanger Guide 552H/135

551/180

551H/135 551/180551H/135

45R/550Intersect

Right

45L/550Intersect

Left

(Top View) (Top View)

551/180

551H/45551H/135

Track Hanger Guide 552H/135

551/180

551H/135 551/180551H/135

TW/550

Pacer track supplied in mill finish as standard. Flexirol track supplied in mill finish and RAL 9010 as standard.

45L/550 H135/550 H90C/550

112 113112 113

H A N G E R S

57B

25

561/2B56B 56BX

HENDERSON

90

62BA/148

61B61B/4

52B

HENDERSON

HENDERSON

HENDERSON

HENDERSON

HENDERSON

HENDERSON

HENDERSON

21B 21B/4 21B0/4

63BA/10463B0A/114 63BA/20562BA/250

205

12

90

fl10

148

12

250

909090

fl10

114

fl10

90

104

25

38 38

140

65

5

185

5

124

133

25

13

155

1325 25 13

(39/16")90

(29/16")65

(51/2")

(39/16")

(29/16")

(51/2")139

(1")

(75/16")185

(3/16")(75/16")

(3/16") (51/4")

(1")

(47/8")

(11/2")

(6")152

(61/8")

(11/2")

(6")

(61/8")

152

38

155

(11/2")

(6")

(61/8")

152

155

(1") (1/2") (1") (1/2") (1") (1/2")

(39/16")

(41/2")

(3/8") (3/8")

(3/8")

(39/16") (39/16") (39/16") (39/16")

(41/8")(513/16")

(913/16")

(1/2")

(1/2")

(81/16")

(1/2")

25.4

35

21B/MD

12.7

76

152.5

152.5

61B/MD

34.5

76

140

25

(3")

(13/8")

(51/2")

(1") (6")

(6")

(1")

(3")

(13/8")

PACER HANGERS

B R AC K E T S

3S/5501A/550

280 A

600 FP 600 CFP

45 O

Pacer Curve 600 C

Face Fix Bracket 281

(Bottom View) (Bottom View)

550 Track 600 Track52

55.5

100

Bolt NotSuppliedby PCH

Bolt NotSuppliedby PCH

Pacer Switch 45R/600 Pacer Switch 45L/600350 350

14.0

Thr

ough

out

R 374

91

79.5

85.5

38

Jointing Bracket 1BX

fl 9

Bracket 1B

20

fl 9

13

80

7

40

25

20

40

34

33

24

34

48

40

48

34

70

13

140

70

70

100-1000

100

6

6

29

20

20

29

2

73

98

(15/16")

(15/16")

(33/8")

(11/2")

(15/16")

(21/16")

(23/16")

(31/8")

(39/16")

(19/16")

(133/4") (133/4")

(17/8")

(15/16")

(13/16")

(1/2")

(19/16")

(3/8")

(17/8")

(15/16")

(23/4")

(1/2")(3/8")

(315/16") (31/8")

(315/16")

(315/16"-393/8")

(23/4")

(23/4")

(51/2")

(19/16")

(1")(1/4")

(13/16")

(13/16")

(11/8")

(1/4")

(1/4") (11/8")

(13/16")

(1/16")

(37/8")

(27/8")

3S/5501A/550

280 A

600 FP 600 CFP

45 O

Pacer Curve 600 C

Face Fix Bracket 281

(Bottom View) (Bottom View)

550 Track 600 Track52

55.5

100

Bolt NotSuppliedby PCH

Bolt NotSuppliedby PCH

Pacer Switch 45R/600 Pacer Switch 45L/600350 350

14.0

Thr

ough

out

R 374

91

79.5

85.5

38

Jointing Bracket 1BX

fl 9

Bracket 1B

20

fl 9

13

80

7

40

25

20

40

34

33

24

34

48

40

48

34

70

13

140

70

70

100-1000

100

6

6

29

20

20

29

2

73

98

(15/16")

(15/16")

(33/8")

(11/2")

(15/16")

(21/16")

(23/16")

(31/8")

(39/16")

(19/16")

(133/4") (133/4")

(17/8")

(15/16")

(13/16")

(1/2")

(19/16")

(3/8")

(17/8")

(15/16")

(23/4")

(1/2")(3/8")

(315/16") (31/8")

(315/16")

(315/16"-393/8")

(23/4")

(23/4")

(51/2")

(19/16")

(1")(1/4")

(13/16")

(13/16")

(11/8")

(1/4")

(1/4") (11/8")

(13/16")

(1/16")

(37/8")

(27/8")

Husky

Flexirol Flexirol

112 113112 113

556/62/20

fl12

225

20 35

85

110

68

40

4022535

85

fl12

110

2323

556/63/40 556/62/40

5

221

458262

50

122

556 556/57 82

85

38

555 555/57 555/52

165

225

3881555/21

555/61

81

152

81

81

38

38

85

81

85

38

(27/16") (31/4")

(13/4")

(115/16")

(413/16") (11/2")

(33/8")

(31/4")

(31/4")

(31/4")

556/52

165

225

38

82

556/61

6

82

38

185

127

(87/8")

(5")

(11/2")

(3/16")

(61/2")

(75/16")

(1/4")

(11/2") (63/4")

556/21

81

81

82

152

38

5

44

172

(13/4")

(3/16")

(6")

(31/4")

(33/16")

(33/16")

(11/2")

(83/4")

556A/221

(33/16")

(11/2")

(33/16")

(33/16")

(6")

(11/2")

(33/8")

H A N G E R S

57B

25

561/2B56B 56BX

HENDERSON

90

62BA/148

61B61B/4

52B

HENDERSON

HENDERSON

HENDERSON

HENDERSON

HENDERSON

HENDERSON

HENDERSON

21B 21B/4 21B0/4

63BA/10463B0A/114 63BA/20562BA/250

205

12

90

fl10

148

12

250

909090

fl10

114

fl10

90

104

25

38 38

140

65

5

185

5

124

133

25

13

155

1325 25 13

(39/16")90

(29/16")65

(51/2")

(39/16")

(29/16")

(51/2")139

(1")

(75/16")185

(3/16")(75/16")

(3/16") (51/4")

(1")

(47/8")

(11/2")

(6")152

(61/8")

(11/2")

(6")

(61/8")

152

38

155

(11/2")

(6")

(61/8")

152

155

(1") (1/2") (1") (1/2") (1") (1/2")

(39/16")

(41/2")

(3/8") (3/8")

(3/8")

(39/16") (39/16") (39/16") (39/16")

(41/8")(513/16")

(913/16")

(1/2")

(1/2")

(81/16")

(1/2")

25.4

35

21B/MD

12.7

76

152.5

152.5

61B/MD

34.5

76

140

25

(3")

(13/8")

(51/2")

(1") (6")

(6")

(1")

(3")

(13/8")

57B

25

561/2B56B 56BX

HENDERSON

90

62BA/148

61B61B/4

52B

HENDERSON

HENDERSON

HENDERSON

HENDERSON

HENDERSON

HENDERSON

HENDERSON

21B 21B/4 21B0/4

63BA/10463B0A/114 63BA/20562BA/250

205

12

90

fl10

148

12

250

909090

fl10

114

fl10

90

104

25

38 38

140

65

5

185

5

124

133

25

13

155

1325 25 13

(39/16")90

(29/16")65

(51/2")

(39/16")

(29/16")

(51/2")139

(1")

(75/16")185

(3/16")(75/16")

(3/16") (51/4")

(1")

(47/8")

(11/2")

(6")152

(61/8")

(11/2")

(6")

(61/8")

152

38

155

(11/2")

(6")

(61/8")

152

155

(1") (1/2") (1") (1/2") (1") (1/2")

(39/16")

(41/2")

(3/8") (3/8")

(3/8")

(39/16") (39/16") (39/16") (39/16")

(41/8")(513/16")

(913/16")

(1/2")

(1/2")

(81/16")

(1/2")

25.4

35

21B/MD

12.7

76

152.5

152.5

61B/MD

34.5

76

140

25

(3")

(13/8")

(51/2")

(1") (6")

(6")

(1")

(3")

(13/8")

PACER MULTIDIRECTIONAL HANGERS

FLEXIROL HANGERS (135° movement)

PACER HANGERS

114 115114 115

fl 16

21K/PX(Top)

21B/P(Top)

(Bottom) (Bottom)

2513 13

13

38

13

45

38

13

45

(Bottom)

45

fl21

40

102

45

17.5

154

38

(Top)

7

45

19

152

178

7

152

38

Bolt M6

25

35

102

fl 21

25

40 102

fl 21

25

40

(61/8")155

(6")152

(11/2")

(61/8")

(6")

(11/2")

155

(1/2")

(1")(1/2")(1")(1/2")

(1/2") (1/2")

(61/8")

(11/2")

155(61/8")

(11/2")

(1") (1")

(19/16")

155

(4")

(13/16")

(13/4")

(4")

(13/16")(19/16")

(13/4")

(13/4") (61/16")

(4")

(19/16")

(13/4")(13/16")

(1/4")

(11/16")

(5/8")

(11/2")

(23/4")

(11/16")

(215/16")38

70

1874

(13/4")

(1/4")

(7")

(6")

(13/8")

(3/4")

P I VOT S E T S

H A N G E R S

FLEXIROL HANGERS (90° movement)

556/62/20

fl12

225

20 35

85

110

68

40

4022535

85

fl12

110

2323

556/63/40 556/62/40

5

221

458262

50

122

556 556/57 82

85

38

555 555/57 555/52

165

225

3881555/21

555/61

81

152

81

81

38

38

85

81

85

38

(27/16") (31/4")

(13/4")

(115/16")

(413/16") (11/2")

(33/8")

(31/4")

(31/4")

(31/4")

556/52

165

225

38

82

556/61

6

82

38

185

127

(87/8")

(5")

(11/2")

(3/16")

(61/2")

(75/16")

(1/4")

(11/2") (63/4")

556/21

81

81

82

152

38

5

44

172

(13/4")

(3/16")

(6")

(31/4")

(33/16")

(33/16")

(11/2")

(83/4")

556A/221

(33/16")

(11/2")

(33/16")

(33/16")

(6")

(11/2")

(33/8")

556/62/20

fl12

225

20 35

85

110

68

40

4022535

85

fl12

110

2323

556/63/40 556/62/40

5

221

458262

50

122

556 556/57 82

85

38

555 555/57 555/52

165

225

3881555/21

555/61

81

152

81

81

38

38

85

81

85

38

(27/16") (31/4")

(13/4")

(115/16")

(413/16") (11/2")

(33/8")

(31/4")

(31/4")

(31/4")

556/52

165

225

38

82

556/61

6

82

38

185

127

(87/8")

(5")

(11/2")

(3/16")

(61/2")

(75/16")

(1/4")

(11/2") (63/4")

556/21

81

81

82

152

38

5

44

172

(13/4")

(3/16")

(6")

(31/4")

(33/16")

(33/16")

(11/2")

(83/4")

556A/221

(33/16")

(11/2")

(33/16")

(33/16")

(6")

(11/2")

(33/8")

556/62/20

fl12

225

20 35

85

110

68

40

4022535

85

fl12

110

2323

556/63/40 556/62/40

5

221

458262

50

122

556 556/57 82

85

38

555 555/57 555/52

165

225

3881555/21

555/61

81

152

81

81

38

38

85

81

85

38

(27/16") (31/4")

(13/4")

(115/16")

(413/16") (11/2")

(33/8")

(31/4")

(31/4")

(31/4")

556/52

165

225

38

82

556/61

6

82

38

185

127

(87/8")

(5")

(11/2")

(3/16")

(61/2")

(75/16")

(1/4")

(11/2") (63/4")

556/21

81

81

82

152

38

5

44

172

(13/4")

(3/16")

(6")

(31/4")

(33/16")

(33/16")

(11/2")

(83/4")

556A/221

(33/16")

(11/2")

(33/16")

(33/16")

(6")

(11/2")

(33/8")

114 115114 115

fl 16

21K/PX(Top)

21B/P(Top)

(Bottom) (Bottom)

2513 13

13

38

13

45

38

13

45

(Bottom)

45

fl21

40

102

45

17.5

154

38

(Top)

7

45

19

152

178

7

152

38

Bolt M6

25

35

102

fl 21

25

40 102

fl 21

25

40

(61/8")155

(6")152

(11/2")

(61/8")

(6")

(11/2")

155

(1/2")

(1")(1/2")(1")(1/2")

(1/2") (1/2")

(61/8")

(11/2")

155(61/8")

(11/2")

(1") (1")

(19/16")

155

(4")

(13/16")

(13/4")

(4")

(13/16")(19/16")

(13/4")

(13/4") (61/16")

(4")

(19/16")

(13/4")(13/16")

(1/4")

(11/16")

(5/8")

(11/2")

(23/4")

(11/16")

(215/16")38

70

1874

(13/4")

(1/4")

(7")

(6")

(13/8")

(3/4")

P I VOT S E T S

fl16

fl10

67B/2012

70

20

40

67B/2012

70

40

20

47 68

40152

68B/2068BX/40

110

fl16

fl10

114

20

40

40

47 68

1325

102

155

38

13

89/2N 104N/94 104NX/94

21N/94

68B/2068BA/180

110

fl16

fl10

114

40

40

180

152

9

5448

25

35 80

16

32

23

58fl10

21R/94

133

106N/94

3

103

(57/8")150

(31/8")(13/8")

(3/8")

(5/8")

(1")

(21/8")(17/8")

(25/16") (3/8")

(11/4")

(7/8")

(3/8")

(51/4")

(7/8")

(11/4")32

23

(1")

(5/8")(41/16")

(1/8")

25

(11/2")

(61/8")

(1/2")

(4")

(1")

(1/2") (3/16")

(61/16")(4")

(13/4")

154

102

45

5

G U I D E S

21/550P

116 117116 117

HENDERSON

HENDERSON

201

55

fl32mm

9

90

55 55 46

46

101

38

25

42

4655

101

37

90

4655

101

(15/8") (11/2")

(1")

(113/16")(23/16")

(4")

(39/16")

(17/16")

(113/16")(23/16")

(4")

(23/16")

(4")

(3/8")

(113/16")

(11/4")

(39/16")

(23/16") (23/16")

(715/16")

(113/16")

G L A S S F I T T I N G S

EF07 EF03

EF01/4 EF01/2

67BA/150

20

fl10

110 40

(19/16")

(3/8")

(13/16")

(45/16")

68BA/110 68BA/180

110

fl16

180

12

70(23/4")

(45/16")

(5/8")

(71/8")

(1/2")

fl16

67BA/220

12

110

110

220

(45/16")

(5/8")

(1/2")

(811/16")

(45/16")

40

40

150(515/16")

(19/16")

(19/16")

G U I D E S

PACER ENDFOLD

67BA/150 67BA/220 68BA/110 68BA/180

116 117116 117

EF05 EF04

EF06

EF09Loose Bolt EF08

EF02

55 55

201

46

201

4655 55

55

fl16

4655

201

30

60

55

85

28

15

50

46

101

55

fl16

46

101

55

30

(23/16")

(715/16")

(23/16")

(113/16")(715/16")

(23/16") (23/16")

(113/16")

(715/16")

(23/16") (23/16")

(113/16")

(13/16")

(5/8")

(23/16")

(113/16")

(13/16")

(5/8")

(4")

(23/16")

(33/8")

(115/16")

(23/8")

(11/8")

(9/16")

(4")

(23/16")

(113/16")

G L A S S F I T T I N G S EF05 EF04

EF06 EF02

EF08Loose Bolt

✝ Standard hinge finishes: White (RAL 9010), Polished Anodized, Silver Anodized and Black Anodized.

For glass cutting dimensions contact Henderson.

88

41

F3734

HENDERSONHENDERSON

F3715 400333 454

HH3/30135

10

24

225

3

80

30

65

151

190

108

47

18

45

(87/8")

(3/8")

(515/16")

(5/16")

(15/16")

(13/8")

(71/2")

(15/8")

(5/16")

(41/4")

(17/8")

(11/16")

(31/8")

(13/16")

(1/8")

(1/4")

(11/8")

(13/4")

(13/8")

(13/4")

(29/16")

7

28

fl11

45

35

HH3/290

AC C E S S O R I E S A N D S TO P S

F3734 S7

HH3/301

F3715 333 454 400Pacer

Flexirol

HH3/290

EF09

118 119118 119

TRACK & CHANNEL

All tracks are in galvanized finish. Once installed they should be kept greased, to reduce wear and increase life. Any length of track is obtained by butting 2 pieces of track together and fixing a brack-et at the joint, and closed brackets at each end.

(ft) 280 290 301 301H 305 307

6 • • • • • •

8 • • • • • •

10 • • • • • •

12 • •

20 •

(ins) 280 290 301 301H 305 307

A 11/16 13/4 25/8 25/8 311/16 43/32

B 13/16 17/16 25/32 25/32 21/4 27/8C 18G 14G 14G 12G 12G 6G

(ins) 89 94 97 99A 1 3/4 11/2 11/2B 1 13/16 11/16 113/16C 12G 17G 12G 12G

118 119118 119

TRACK BRACKETS

All brackets are aluminum alloy die castings except where otherwise indicated.

Pressed steel brackets in painted finish.

Pressed steel brackets – galvanized.Fit closed brackets at track ends, or fit end-clips 1A/301 EC (for alloy brackets) or 1/301 EC (for steel brackets) in the case of all 301 track brackets. Jointing brackets are only required at track curve ends. Maximum brack-et spacing is every 3 ft.

Fig no. A B C D E Bolt

281 19/16 1/4 11/8 15/8 9/16 8G screw

1A/290 25/8 1/2 2 11/4 11/165/16

1/290/S 3 1/2 25/32 23/8 11/16 5/16

1A/301 313/16 3/4 27/8 21/4 13/8 1/21/301/S 315/16 5/8 27/8 23/8 115/32 1/21A/305 51/2 1 33/8 3 11/2 5/81/307/S 61/4 1 35/8 3 125/32 5/8

•

•

•

*

Fig no. A B C D E Bolt

9A/290 111/16 5/8 23/4 15/16 2 14G screw

9/301/S 29/16 15/32 415/16 11/2 31/2 18G screw

9A/305 35/16 11/2 65/16 25/16 51/8 1/29/307/S 35/16 2 71/4 22 3/32 51/2 5/8

*

*

Fig no. A B D E F Bolt

5/290 31/8 13/16 11/2 21/8 11/161/2

5/301 43/8 15/16 21/4 31/8 19/165/8

5/305 61/8 11/2 3 35/8 17/8 3/45/307/S 71/2 1 4 35/8 12 5/32 3/4*

Fig no. A B D E F Bolt

7/301/S 49/16 11/2 23/8 25/8 19/165/8*

Fig no. A B C D E Bolt

3A/290 27/32 - 31/4 11/4 21/2 5/16

3A/301 33/8 - 51/8 21/4 315/161/2

3/301/S 315/32 - 51/8 21/4 313/16 1/23A/305 43/4 - 65/8 3 415/16 5/83/307/S 67/32 - 71/4 31/2 51/2 5/8

*

*

Fig no. A B C D E Bolt

4A/290 25/8 - 17/8 3 23/8 5/164A/301 33/4 - 3 45/8 33/4 1/24A/305 53/8 - 31/4 71/2 51/8 5/84/307/S 61/4 - 35/8 71/2 51/2 5/8*

Fig no. A B C D E Bolt

4/301S 311/16 - 13/4 45/8 33/4 1/2*

Fig no. A B C D Bolt

4R/280S 113/16 2 13/8 13/8 3/84R/290/S 113/16 13/16 13/4 21/16 3/84R/301/S 29/16 21/4 29/16 31/16 1/24R/305/S 211/16 3 213/16 4 7/32 5/84R/307/S 213/16 3 39/16 4 9/32 3/4

•••••

Fig no. A B&E C D F Bolt

6/301 33/4 31/8 6 5 35/8 3/8*

Fig no. A B C D E F Bolt

8/301/S 37/8 5 7 45/8 25/8 35/8 1/2*

•*

120 121120 121

HANGERS /N = Nylon wheels /S = Steel wheelsNylon wheels are quieter and avoid the need to grease track to reduce wear. Hence their car-rying capacity is greater. For automatic doors halve the carrying capacity and use nylon wheels if possible.

DimensionsA B C D 0

37/16 11/4 11/8 17/16 13/32

55/8 23/4 111/16 27/32 5/8

55/8 23/4 111/16 27/32 5/8

63/8 23/4 111/16 3 5/8

87/16 33/8 21/4 37/16 13/16

DoorWeight

Capacity300 lbs.300 lbs.400 lbs.

600 lbs.800 lbs.

800 lbs.1000 lbs.

1500 lbs.

2500 lbs.4400 lbs.

Trackno.

290

301

301H

305

307

Hangerno.

56X/N56K/S

56K/S 20056A/S56A/N

56A/S56A/S

56C/S

56F/S56FJ/S

DimensionsA B C D E

37/16 33/4 21/4 17/16 11/2 17/8

55/8 7 3 27/32 13/4 21/4

55/8 7 3 27/32 13/4 21/4

63/8 7 3 3 13/4 21/4

87/16 15 21/2 37/16 23/4

DoorWeight

Capacity300 lbs.300 lbs.400 lbs.

600 lbs.800 lbs.

800 lbs.1000 lbs.

1500 lbs.

4400 lbs.

Trackno.

290

301

301H

305307

Hangerno.

53K/N53K/S

53K/S 20053A/S53A/N

53A/S53A/N

53C/S

53FJ/S

-

-

-

-

DimensionsA B C D

71/16 21/4 111/16 17/1671/16 21/4 111/16 27/32

211/2 31/4 2 3

Trackno.290301

301H305

Hangerno.

62K

62A

62C

DimensionsA B C D E

6 6 1 17/16 3/16

7 6 11/2 27/32 1/4

7 6 11/2 3 1/4

Trackno.

290

301301H305

Hangerno.

21K/S21K/N21K/4N21A/S21A/4S

21C/S

DimensionsA B C D 0

37/16 43/8 11/8 17/16 13/32

55/8 511/16 111/16 27/32 5/8

55/8 511/16 111/16 27/32 5/8

63/8 511/16 111/16 3 5/8

87/16 51/2 21/4 37/16 13/16

DoorWeight

Capacity300 lbs.400 lbs.

600 lbs.800 lbs.

800 lbs.1000 lbs.

1500 lbs.

2500 lbs.4400 lbs.

Trackno.

290

301

301H

305

307

Hangerno.

56KX/S56KX/N56AX/S56AX/N

56AX/S56AX/N

56CX/S

56FX/S56FJX/S

DimensionsA C D E F

37/16 1 51/2 1/16 1

55/8 23/8 75/161/16 11/2

55/8 23/8 75/161/16 11/2

63/8 21/2 75/161/16 11/2

Trackno.

290

301

301H

305

Hangerno.

57K/N

57A/S

57A/N

57C/S

DoorWeight

Capacity

300 lbs.

600 lbs.

1000 lbs.

1500 lbs.

DimensionsA C D1 D2 E F

37/16 1 3 2 51/4 1

55/8 23/8 4 5 61/2 11/255/8 23/8 4 5 61/2 11/263/8 21/2 4 61/2 11/2

Trackno.

290

301

301H

305

Hangerno.

52K/S52K/N

52A/S

52A/N

52C/S

DoorWeight

Capacity300 lbs.300 lbs.

600 lbs.

1000 lbs.

1500 lbs.

DimensionsA B C D4 21/4 111/16 17/164 21/4 111/16 27/32

87/8 31/4 2 3

Trackno.290301

301H305

Hangerno.

63K

63A

63C

DimensionsA B C D51/2 3/16 1 17/1671/4 1/4 11/2 27/32

71/4 1/4 11/2 3

Trackno.

290301

301H305

Hangerno.

61K/S

61A/S

61C/S

120 121120 121

GUIDES OTHERS

No. 31S Single Wall Mounted Stay Roller (Bi-parting doors) - Provides clear threshold - fit No. 128 shoe guide with center stop. Nylon Rollers, galv. steel angle.

No. 31D Double Wall Mounted Stay Roller (Double line) - Provides clear threshold - Nylon Rollers, galv. steel angle.

No. 126HD/A Ground Stay Rollers - Provides clear threshold - Nylon Rollers, covered by shields to prevent traffic damage. Galv. steel.No. 128 Shoe Guide with Center Stop Grey painted iron, adjustable. Center stop plate provided, for bi-parting doors.

No. 299 Curtailed Rail with Inverted No. 89 Channel to underside of doors. - Provides clear threshold - fit No. 128 shoe guide with center stop on bi-parting doors.

No. 126 Ground Stay Rollers - Provides clear threshold - fit No. 128 shoe guide with center stop on bi-parting doors. Galv. steel.

Most roller guides are fitted with brass rollers. The assemblies are rustproofed by electrozinc galvanizing. Fit two guides per door. Always specify channel type when ordering guides (eg 104P/97).

No. 1021/2 Side Guide Roller (Patented) Heavy duty plough guide, ideal for most applications. Malleable body with self-adjusting roller spindles. Use with channel No. 97.

No. 105R Roller Guide - General purpose guide suitable for most applications. Is economical yet very strong. Use with channel Nos. 89 or 97.

No. 106R Under Guide Roller - Steel plate with a brass roller. Ideal for small, light doors especially internal application. Not recommended for dirty conditions. Use with channel Nos. 89, 94, or 97.

No. 113R Side Guide Roller - Steel plate with a brass roller. Not recommended for heavy doors or dirty conditions. Use with channel Nos. 89 or 94.

No. 104P Under Guide Roller (Patented) - Brass roller used for metal doors. Easily removable without dismounting doors. Use with channel Nos. 89 or 97.

No. 104PX Long Under Guide Roller - Same as 104P but with extra long bolt.

No. 67 Intermediate Guide - folding doors No. 67/89 for track 290 and channel 89.No. 67/97 for track 301 or 301H and channel 97.No. 67C/97 for track 305 and channel 97.

No. 68 End Guide - folding doors No. 68/89 for track 290 and channel 89.No. 68/97 for track 301 or 301H and channel 97.No. 68C/97 for track 305 and channel 97.

No. 21R End Fold Guide - folding doors No. 21KR/94 for track 290 and channel 94.No. 21R/94 for track 301, 301H and 305.

No. 106R Center Fold Guide - folding doors No. 106R/94 for all tracks.

No. 994 Cane Bolt - No. 994 15" electro galvanized steel shoot with socket for concrete, when required.

No. 994X Offset Cane Bolt - No. 994X 15" electro galvanized steel shoot with socket for concrete.

No. 994R Roller Guide Cane Bolt - No. 994R electro galvanized steel shoot with brass roller. Use with channel Nos. 89 or 97.

No. 994S Locking Cane Bolt - No. 994S 15" electro galvanized steel shoot with socket for concrete. Use with padlock (Not by PCH).

No. 77 Flush Bolt - No. 77J suitable for framed doors with bottom rails up to 6" x 17/8 ". Gray painted steel.No. 77S suitable for framed doors with bottom rails up to 9" x 23/4 ". Gray painted steel.

No. 78 Flush Bolt - Designed for fitting to stile of flush doors minimum 5" x 13/4 ". Gray painted steel.

No. 333 Semi-Flush Bolt - 6" x 13/8 " aluminum alloy in satin anodized finish. No. 454 Semi-Flush Bolt - 71/2" x 19/16 " aluminum alloy in satin anodized finish.

No. 863 Bow Handle - Gray painted iron. 51/4" x 13/4 "

No. 463 Bow Handle - Gray painted iron. 61/4" x 17/8 "

No. 464 Bow Handle - Gray painted iron. 101/4" x 21/4 "

No. 400 Flush Pull - Aluminum alloy in satin anodized finish. 41/4" x 17/8" with 5/8" mortise.

No. 414 Flush Pull - Aluminum self finish. 51/4" x 21/2" with 3/4" mortise.

No. 413 Flush Pull - Heavy duty Gray painted iron. 6" x 33/4" with 1" mortise.

No. 115 Corner Protection Plates - Rustproofed by electrozinc plating - Fit a pair on the leading door edge.

No. 109 Single Wall or Ground Stop - Gray painted steel with rubber buffer. For light doors. Fit on wall, 2/3 up door height.

No. 107E Buffer Stop - Rubber. For fitting to slamming post when other stops cannot be used.

No. 107 Single Wall Stop - Gray painted steel with rubber buffers. For medium weight doors, fit one on wall, 2/3 up door height. For heavier door fit 2.

No. 431 Swivel Locking Bar - Rustproofed by zinc plating. For doors sliding on outside face of wall or for securing to end post. Use with padlock (Not by PCH).

No. 430 Detachable Locking Bar - Rustproofed by zinc plating. For Straight-Run doors sliding inside and locked outside. Use with padlock (Not by PCH).

No. 65 Back Flap Hinges - No. 65 for track 290, 301 or 301H. Aluminum. No. 65C track 305. Gray painted iron.

No. 403 Butt Hinge - No. 403/1 31/2" x 2" aluminum alloy.No. 403/2 4" x 21/8" aluminum alloy.No. 403/3 4" x 3" aluminum alloy.

Also available in steel to similar sizes and referred to as No. 37, No. 41, No. 42 respectively.