Date post: | 24-Oct-2014 |
Category: |
Documents |
Upload: | joel-becher |
View: | 89 times |
Download: | 8 times |
3
www.genstartech.comTable of Contents
Ta
ble
of
Co
nte
nts
Air Gas Kits................................................................4
Air Gas Auto-Ignite Kits.........................................5
Air Gas Torch Handles...........................................6
Air Gas Auto-Ignite Tips........................................7
Air Acetylene Tips...................................................8
Air Propane/MAPP® Tips.......................................9
Air Propane/MAPP® Hand Torch Kits..............10
Air Propane/MAPP® Hand Torch......................11
Oxy-Fuel Outfits..............................................12-15
Oxy-Fuel Apparatus.......................................16-17
Cutting Attachment & Tips................................18
The Compact TorchTM Kits............................19-21
Regulators........................................................22-24
Gauges.....................................................................23
Regulator Inlet & Outlets Accessories.....25-26
Regulator Accessories & CGA Adapters........27
Hose Repair Kits & Crimping Tools................28
Flashback Arrestors.............................................29
Check Valves.........................................................30
Mul-T-Torch Air Propane Torch Outfit........... 31
Cylinders & Carry Stands......................................32
Tip Cleaners & Hoses..........................................33
Strikers, Goggles, Wrenches..............................34
Nitrogen Purge & Blow Gun Kits.....................35
Technical Performance Data & Charts....36-37
Catalog Index & Comparison Chart.........38-41
Manufacturer Cross Reference..................42-44
Warranty..................................................................45
2
Company OverviewC
om
pa
ny
Ov
erv
iew
Founded in 1969, Genstar Technologies Co., Inc. (Gentec) is a world-class manufacturer specializing in producing high quality gascontrol components. Gentec's product lines include ultra high purity,high purity, and industrial gas control and handling devices, medicalgas control systems, high pressure gas products, and gas welding apparatus. As a total system solution provider, Gentec also offers itscustomer value-added services such as technical support, on-siteevaluation, design, and implementation. Today, Genstar Technologiesis a global industrial leader renowned for outstanding customer service, excellent product quality, and continuous technological innovation.
4
Air-Gas KitsA
ir-G
as
Kit
s
Swirl Flame, Quick Connect Style KitsMODEL SOFT SILVER REGULATOR TIP TANK CARRYING
NUMBER SOLDER BRAZE CONNECTION STAND
KA5BSP 1 1/2” 3/4” 101Y-BA 6Q-5TA B w/o
KA5MCSP 1 1/2” 3/4” 101Y-MCA 6Q-5TA MC w/o
KA8MCSP 2” 1” 101Y-MCA 6Q-3TA, 6Q-8TA MC w/o
KA8MC-TSP 2” 1” 101Y-MCA 6Q-3TA, 6Q-8TA MC CRT10MC
KA11BSP 3” 1 5/8” 101Y-BA 6Q-3TA, 6Q-11TA B w/o
KA14BSP 3 1/2” 2” 101Y-BA 6Q-5TA, 6Q-14TA B w/o
• All kits come with 66QT-RATorch Handle & HGA-012A 12’R-Grade Hose.
• Front mount torch control valvekits available. Add ”-F ” tomodel number. Refer to Page 6Air Gas Torch Handles *Example: KASL12B-FSP
KA5BSP KA8MC-TSP
CRT10MC
MODEL SOFT REGULATOR TIP TANKNUMBER SOLDER CONNECTION
KASF4BSP 1” 101Y-BA 7S-4SA B
KASF4MCSP 1” 101Y-MCA 7S-4SA MC
Soft Flame, Screw Connect Style Kits
KASF4MCSP
• All kits come with 77ST-RA Torch Handle & HGA-012A 12’ T-Grade Hose.
• Front mount torch control valve kits available.Add ”-F ” to model number. *Example: KASF4MC-FSP
MAPP ® is a registered trademark of BOC Group, Inc.
GENTEC Kits feature the highest quality and best value in Air-Fuel Tips and Torch Handles.
Air-Acetylene Kits - KA Series
Air-Propane/MAPP Kits - KP Series
Swirl Flame, Quick Connect Style Kits
®
MODEL SOFT SILVER REGULATOR TIPNUMBER SOLDER BRAZE
KP4SP 2 1/2” 1 1/4” 101F-510B 6Q-4TP
KP5SP 4” 2” 101F-510B 6Q-3TP, 6Q-5TP
KP6SP 6” 4” 101F-510B 6Q-4TP, 6Q-6TP
• All kits come with 66QT-RB Torch Handle & HGP-01212’ T-Grade Hose.
• Front mount torch control valve kits available. Add ”-F ”to model number. *Example: KP6-FSP
KP6SP
5
www.genstartech.comAuto-Ignite Kits
Au
to-Ig
nite
Kits
GENTEC Kits with Auto-Ignite Tips (ignition with the push of a button)
MAPP ® is a registered trademark of BOC Group, Inc.
Air-Acetylene Auto-Ignite Kits - KASL Series
MODEL SOFT SILVER REGULATOR TIP TANKNUMBER SOLDER BRAZE CONNECTION
KASL5MCSP 1 1/2” 3/4” 101Y-MCA 6Q-5TASL MC
KASL5BSP 1 1/2” 3/4” 101Y-BA 6Q-5TASL B
KASL8MCSP 2” 1” 101Y-MCA 6Q-8TASL MC
KASL8BSP 2” 1” 101Y-BA 6Q-8TASL B
KASL12BSP 3 1/2” 2” 101Y-BA 6Q-12TASL B
Swirl Flame, Quick Connect Style Kits
• All kits come with 66QT-RA Torch Handle &HGA-012A 12’ R-Grade Hose.
• Front mount torch control valve kits available.Add ”-F ” to model number. Refer to Page 6Air Gas Torch Handles *Example: KASL8B-FSP KASL8BSP
Air-Propane/MAPP Auto-Ignite Kits - KPSL Series®
MODEL SOFT SLIVER REGULATOR TIPNUMBER SOLDER BRAZE
KPSL3SP 1” 1/2” 101F-510B 6Q-3TPSL
KPSL4SP 1 1/2” 3/4” 101F-510B 6Q-4TPSL
KPSL5SP 2 1/2” 1 1/4” 101F-510B 6Q-5TPSL
Swirl Flame, Quick Connect Style Kits
• All kits come with 66QT-RB Torch Handle &HGP-012 12’ T-Grade Hose.
• Front mount torch control valve kits available.Add ”-F ” to model number. *Example: KPSL5-FSP
KPSL5SP
Air-Propane/MAPP Auto-Ignite Swivel Kits - KPSLSW Series®
MODEL SOFT SLIVER REGULATOR TIPNUMBER SOLDER BRAZE
KPSL3SW-FSP 1” 1/2” 88QH-R 6Q-3TPSL
KPSL4SW-FSP 1 1/2” 3/4” 88QH-R 6Q-4TPSL
Swirl Flame, Quick Connect Style Kits
• All kits come with 66QT-FB Front Adjust TorchHandle & HGP-012 12’ T-Grade Hose.
KPSL3SW-FSP
6
Air Gas Torch HandlesA
irG
as
To
rch
Ha
nd
les
MAPP ® is a registered trademark of BOC Group, Inc.
Air Acetylene/Air-Propane/MAPP Torch Handles®
Quick Connect, Front Valve
QUICK CONNECT A*- Air Acetylene
“A” Fitting 3/8”-24
66QT-FA* 66QT-FB*
Quick Connect, Rear Valve
66QT-RA* 66QT-RB*
Adaptor for quick connect torch to screw connect tip
66QA7S
SCREW CONNECT
Screw Connect, Front Valve
77ST-FA* 77ST-FB*
Screw Connect, Rear Valve
77ST-RA* 77ST-RB*
Adaptor for screw connect torch to quick connect tip
77SA6Q
GENTEC’s ergonomically designed Air Gas Torch Handles made from a phenolic com-pound provide durability and comfort. Torch Handle options include front or rear valveplacement and quick or screw connect. Adaptors are also available to accommodatedifferent styles of connection.
B*-Air Propane/MAPP®
”B” Fitting 9/16”-18
A*- Air Acetylene
”A” Fitting 3/8”-24
B*-Air Propane/MAPP®
”B” Fitting 9/16”-18
7
www.genstartech.comAir Gas Auto-Ignite Tips
Air
Ga
sA
uto
-Ign
iteT
ips
MAPP ® is a registered trademark of BOC Group, Inc.
GENTEC Quick Connect, Swirl Flame Auto-Ignite Tips eliminate the need for spark lighters.Ignition with the push of a button saves time and fuel cost. The tips are interchangeablewith other quick connect style torches. Air Acetylene Tips fit 66QT-FA and 66QT-RA torchhandles. Air Propane/MAPP® Tips fit 66QT-FB and 66QT-RB torch handles.Air Acetylene
AUTO-IGNITE TIPS
• All Tips Fit 66QT Series Torch Handles
QUICK CONNECT REPLACEMENT COPPER TUBING CAPACITYMODEL NUMBER TIP END SOFT SOLDER SILVER SOLDER
6Q-3TASL 3TAESL 1/4”-1” 1/8”-1/2”
6Q-5TASL 5TAESL 3/4”-1 1/2” 1/4”-3/4”
6Q-8TASL 8TAESL 1”-2” 1/2”-1”
6Q-12TASL 12TAESL 2”-3 1/2” 1”-2”
6Q-5TASL
Quick Connect, Swirl Flame
REPLACEMENT TIP ENDS
3TAESL 5TAESL 8TAESL 12TAESL
Air Propane/MAPP®
AUTO-IGNITE TIPS
• All Tips Fit 66QT Series Torch Handles
6Q-4TPSL
Quick Connect, Swirl Flame
REPLACEMENT TIP ENDS
3TPESL 4TPESL 5TPESL
COPPER TUBING CAPACITYQUICK CONNECT REPLACEMENT PROPANE GAS MAPP® GASMODEL NUMBER TIP END SOFT SOLDER SILVER SOLDER SOFT SOLDER SILVER SOLDER
6Q-3TPSL 3TPESL 1/4”-1” 1/8”-1/2” 1/4”-1 1/2” 1/4”-1/2”
6Q-4TPSL 4TPESL 1/4”-1 1/2” 1/4”-3/4” 1/4”-2 1/2” 1/4”-1 1/4”
6Q-5TPSL 5TPESL 1 1/2”-2 1/2” 1/2”-1 1/4” 1”-4” 1/2”-2”
Swirl Flame
Propane 1750ºF
MAPP® 2400ºF
(Stainless Steel)
(Stainless Steel)
Expanded Heat Zone
8
Air Acetylene TipsA
irA
ce
tyle
ne
Tip
s
GENTEC Air Gas Tips are constructed with stainless steel and brass. Swirl flame tips produce a very hot efficient flame for fast soldering and brazing. Swirl flame tips mix fueland air completely through a helical blade providing maximum combustion efficiency at theend of the tip. Swirl flame tips with replaceable tip ends, are available for Air-Acetylene andAir-Propane applications. Soft flame tips are available for Air-Acetylene applications.
Air Acetylene
SWIRL FLAME TIPS
6Q-2TA 6Q-3TA 6Q-5TA 6Q-8TA 6Q-11TA 6Q-14TA 7S-3TA 7S-5TA 7S-8TA 7S-11TA
Quick Connect Screw Connect
QUICK CONNECT SCREW CONNECT REPLACEMENT COPPER TUBING CAPACITYMODEL NUMBER MODEL NUMBER TIP END SOFT SOLDER SILVER SOLDER
6Q-2TA 2TEA 1/8”-1/2” 1/8”-1/4”6Q-3TA 7S-3TA 3TEA 1/4”-1” 1/8”-1/2”
6Q-5TA 7S-5TA 5TEA 3/4”-1 1/2” 1/4”-3/4”
6Q-8TA 7S-8TA 8TEA 1”-2” 1/2”-1”
6Q-11TA 7S-11TA 11TEA 1 1/2”-3” 7/8”-1 5/8”
6Q-14TA 14TEA 2”-3 1/2” 1”-2”
SOFT FLAME TIPS Quick Connect Screw Connect
6Q-1SA 6Q-2SA 6Q-3SA 6Q-4SA 6Q-5SA 6Q-6SA 7S-1SA 7S-2SA 7S-3SA 7S-4SA 7S-5SA 7S-6SA
QUICK CONNECT SCREW CONNECT COPPER TUBING CAPACITYMODEL NUMBER MODEL NUMBER SOFT SOLDER SILVER SOLDER
6Q-1SA 7S-1SA 1/16”-1/8” up to 1/16”
6Q-2SA 7S-2SA 1/8”-3/8” up to 1/8”
6Q-3SA 7S-3SA 3/8”-1/2” up to 3/8”
6Q-4SA 7S-4SA 1/2”-1” up to 1/2”
6Q-5SA 7S-5SA 3/4”-1 1/2” 1/2”-3/4”
6Q-6SA 7S-6SA 1”-4” 3/4”-1 1/2”
• All swirl flame tips havereplaceable stainlesssteel tip ends.
8TEA
9
www.genstartech.comAir Propane/Mapp® Tips
Air
Pro
pa
ne
/MA
PP
®T
ips
MAPP ® is a registered trademark of BOC Group, Inc.
COPPER TUBING CAPACITYQUICK CONNECT SCREW CONNECT REPLACEMENT PROPANE GAS MAPP® GASMODEL NUMBER MODEL NUMBER TIP END SOFT SOLDER SILVER SOLDER SOFT SOLDER SILVER SOLDER
6Q-2TP 7S-2TP 2TEP 1/8”-1/4” 1/16”-1/4” 1/8”-1/2” 1/8”-1/4”6Q-3TP 7S-3TP 3TEP 1/4”-1” 1/8”-1/2” 1/4”-1 1/2” 1/4”-1/2”6Q-4TP 7S-4TP 4TEP 1/4”-1 1/2” 1/4”-3/4” 1/4”-2 1/2” 1/4”-1 1/4”6Q-5TP 7S-5TP 5TEP 1 1/2”-2 1/2” 1/2”-1 1/4” 1”-4” 1/2”-2”6Q-6TP 6TEP 1 1/2”-4” 3/4”-2” 1 1/2”-6” 3/4”-4”
R
6Q-2TP 6Q-3TP 6Q-4TP 6Q-5TP 6Q-6TP
7S-2TP 7S-3TP 7S-4TP 7S-5TP
Air Propane/MAPP®
SWIRL FLAME TIPS Quick Connect Screw Connect
• All swirl flame tips have replaceable stainless steel tip ends.
GENTEC GHS-14 Heat Shield is designed to protect the surrounding area from the hot flame. It also keeps the flamestable in windy areas. One size fits most of the GENTEC tips.(Fits 6Q-4TP, 6Q-11TA, 8Q-3TP, 7S-4TP, 7S-11TA)
GHS-14
HEAT SHIELD 6TEP
Air Propane/Mapp® Hand Torch KitsA
irP
rop
an
e/M
AP
P®
Ha
nd
To
rch
Kit
s
MAPP ® is a registered trademark of BOC Group, Inc.
GENTEC Hand Torches for disposable MAPP® or Propane tanks are designed for professionaljobs. Swirl flame tips produce a hot efficient flame for fast soldering and brazing. They areused with the GENTEC 88QH-R rugged brass regulator and either a Propane or MAPP® dispos-able tank without changing the tip. A 360˚ swivel allows for easy operation in hard to reachareas. Three tip models to choose from: 8Q-1TP, 8Q-3TP and auto-ignite 8Q-33TP.
88QH-R
88QH-1 KitRegulator: 88QH-R, CGA600Hand Torch Tip: 8Q-1TPReplacement Tip End: 2TEP
8Q-1TP
2TEP
88QH-3 KitRegulator: 88QH-R, CGA600Hand Torch Tip: 8Q-3TPReplacement Tip End: 4TEP
8Q-3TP
4TEP
88QH-33 KitRegulator: 88QH-R, CGA600Auto-Ignite Hand Torch Tip: 8Q-33TPReplacement Tip End: 4TPESL
8Q-33TP
4TPESL
88QH-R
88QH-R
Hand Torch Regulator• Use with disposable Propane or MAPP® Tank.
• 360˚ swivel elbow forhard to reach areas.
88QH-R
8Q-1TP
8Q-3TP
Hand Torch Tips
MODEL REPLACEMENT COPPER TUBING CAPACITYNUMBER TIP END SOFT SOLDER SILVER SOLDER
8Q-1TP 2TEP 1/8”-1/2” 1/8”-1/2”8Q-3TP 4TEP 3/8”-2 1/2” 1/4”-1 3/8”8Q-33TP 4TPESL 3/8”-2 1/2” 1/4”-1 3/8”
Auto-Ignite Hand Torch Tip
8Q-33TP
4TPESL
Replacement Tip End
10
HAND TORCH KITS HAND TORCH KIT COMPONENTS
(Stainless Steel)
( includes 2TEP)
( includes 4TEP)
( includes 4TPESL)
11
www.genstartech.comAir Propane/Mapp® Hand Torch
Air
Pro
pa
ne
/MA
PP
®H
an
dT
orc
h
MAPP ® is a registered trademark of BOC Group, Inc.
GENTEC 8Q-44TP Auto Ignite Hand Torch features a push button igniter, flame-lock but-ton, stainless steel burn tube, high output replaceable stainless steel swirl flame tip end,flame adjustment valve and durable cast aluminum body. This easy to operate torchcomes with a CGA 600 inlet connection for use with either a 1 lb MAPP® or Propanecylinder for soldering and brazing of copper, brass & aluminum.
AUTO-IGNITE SWIRL FLAME HAND TORCH
4TPESL
Replacement Tip End
8Q-44TP
8Q-44TP• High output swirl flame.• Use with Propane and MAPP®.• Durable cast aluminum body.• Precise flame adjustment.• CGA600 inlet connection.
PENCIL FLAME PROPANE HAND TORCH
99TP • Use with 14.1 oz. Propane or 1 lb MAPP® tank .• All brass construction for durability.• Precise flame adjustment by control valve.• Excellent for light duty applications, such
as soldering and thawing frozen pipes.• CGA600 inlet connection.
99TP
Pencil Flame
Swirl Flame
A Swirl Flame tip produces an efficienthigh energy flame that is stable even inwindy conditions. A helical blade, insidethe stainless replaceable tip end, pre-mixes the fuel gas and air to achievemaximum combustion efficiency.
Propane 1750ºF
MAPP® 2400ºF
Expanded Heat Zone
Propane 1750ºF
MAPP® 2400ºF
Expanded Heat Zone
AUTO-IGNITE SWIVEL KIT
KPSL3SW-FSP, KPSL4SW-FSP• Lightweight & portable.• Use with either propane or MAPP® disposable cylinders. • Auto-ignite tip with replaceable tip end.• Swirl flame tip for maximum combustion. • Rugged brass regulator with 360º swivel elbow for work at any angle.
KPSL3SW-FSP
Cylinder is not included.
MODEL SOFT SLIVER REGULATOR TIPNUMBER SOLDER BRAZE W (ADAPTER)
KPSL3SW-FSP 1” 1/2” 88QH-R w (24-8Q01) 6Q-3TPSL
KPSL4SW-FSP 1 1/2” 3/4” 88QH-R w (24-8Q01) 6Q-4TPSL
For more detail refer to page 5
3TPESL
12
Oxy-Fuel Outfits3
0S
eri
es
Ou
tfit
s
GENTEC Outfits are designed for a variety of professional jobs. They are availablewith cylinders and plastic carriers. They are capable of cutting up to 1/2” steel,welding up to 1/8” steel and brazing up to 1” copper pipes. All outfits come withtorch end check valves.
KA30• GRAB2 B Acet. Reg.
KA30MC• GRAMC2 MC Acet. Reg.
KA30MC-T• GRAMC2 MC Acet. Reg.• CRT10 Plastic Carrier
KA30MC-TC• GRAMC2 MC Acet. Reg.• CRT10 Plastic Carrier• CY20-540• CY10-MC Cylinder
• 140T Torch Handle• G17-VMA-1 Rosebud Tip• 171W-2 Welding Tip• 210X-80-A Oxy Reg.• HW23-012A Hose• 9-WG6G Goggles• 25-300 Striker• 24-CV5PR
Torch End Check Valve
OUTFIT NUMBER COMPONENT
KA30 SERIES
Oxy-Acetylene Welding/Brazing/Heating
ANTI-THEFT SKIN PACKAGE OPTION
All Gentec Outfits Series 30,50, 70T, 90 are available withAnti-Theft Skin Package. To order skin package, add“SP” after the model number(Example: KA30MC-TCSP)
KA30MC-TC
GENTEC KA30 Series Outfits include onewelding/brazing tip and a multi-flame rosebud tip.
G17-VMA-1 Rosebud Tip
THEFT
171W-2 Welding Tip
*Use 20 c.f. oxy. & 1 lb disposable MAPP® or Propane Fuel Gas Cylinders not included
13
www.genstartech.comOxy-Fuel Outfits
50
Se
ries
Ou
tfits
MAPP ® is a registered trademark of BOC Group, Inc.
* KM50-T (MAPP®)
• 172CP-0 Cutting Tip• CRT10 Plastic Carrier
* KP50-T (Propane)• 172CN-0 Cutting Tip• CRT10 Plastic Carrier
• 140T Torch Handle• 141C Cutting Attachment• G17-1 Welding Tip• 210X-80-A Oxy Reg.• 88QH-R w/Adaptor.• HW23-T012A Hose• 9-WG6G Goggles• 25-300 Striker• 24-CV5PR
Torch End Check Valve
OUTFIT NUMBER COMPONENT
KA50-T• 172C-0 Cutting Tip• CRT10 Plastic Carrier
KA50-TC• 172C-0 Cutting Tip• CRT10 Plastic Carrier• CY20-540• CY10-MC Cylinder
• 140T Torch Handle• 141C Cutting Attachment• 171W-2 Welding Tip• G17-VMA-1 Rosebud Tip• 210X-80-A Oxy Reg.• GRAMC2 MC Acet Reg.• HW23-012A Hose• 9-WG6G Goggles• 25-300 Striker• 24-CV5PR
Torch End Check Valve
OUTFIT NUMBER COMPONENT
Oxy-Fuel Welding/Brazing/Cutting/Heating
KA50 SERIES
KM50/KP50 SERIES
GENTEC KA50 Series Outfits include a light duty cutting attachment with cutting tip,a welding/brazing tip and a rosebud tip.
KA50-TC
KM50-T
G17-1 Welding Tip
Oxy-Acetylene Welding/Brazing/Cutting/Heating
172C-0 Cutting Tip
141C Cutting Attachment
Cylinders not included
141C Cutting Attachment
G17-VMA-1 Rosebud Tip
KAT70MC-TC
GF11 Air/Gas Adaptor
14
Oxy-Fuel Outfits7
0S
eri
es
Ou
tfit
s
KAT70• GRAB2 B Acet. Reg.
KAT70MC• GRAMC2 MC Acet. Reg.
KAT70MC-T• GRAMC2 MC Acet. Reg.• CRT10 Plastic Carrier
KAT70MC-TC• GRAMC2 MC Acet. Reg.• CRT10 Plastic Carrier• CY20-540• CY10-MC Cylinder
Oxy-Acetylene & Air-Fuel Welding/Soldering/Brazing/Cutting/Heating
• 140T Torch Handle• GF11 Air/Gas Adaptor• 141C Cutting Attachment• 171W-2 Welding Tip• 172C-0 Cutting Tip• 7S-5TA Air/Gas Tip• 210X-80-A Oxy Reg.• HW23-012A Hose• 9-WG6G Goggles• 25-300 Striker• 24-CV5PR
Torch End Check Valve
OUTFIT NUMBER COMPONENT
KAT70 SERIES
7S-5TA Air /Gas Tip
GENTEC KAT70 Series Outfits are designed to be “The complete tote outfit”. It includes an Air/Gas adaptor that easily converts the oxy-fuel torch handle to be used with anAir/Gas tip. This allows for solding/brazing use without the need for oxygen and thatrequires a lower temperature.
15
www.genstartech.comOxy-Fuel Outfits
90
Se
ries
Ou
tfits
GENTEC KA90 Series Outfits are capable of cutting up to 1/2” steel, welding up to 1/8” steel and brazing up to 1 1/2” copper pipes. The KAT90 Series outfits includeseverything in the KA90 plus an Air/Gas adaptor that easily converts Oxy-Fuel torchhandle to be used with an Air/Gas tip. This allows the outfit to be used with or without oxygen, giving the operator the ability to do both soldering and brazing jobs.
KAT90• GRAB2 B Acet. Reg.
KAT90MC• 210Y-15-A MC Acet. Reg.
KAT90MC-T• 210Y-15-A MC Acet. Reg.• CRT10 Plastic Carrier
KAT90MC-TC• 210Y-15-A MC Acet. Reg.• CRT10 Plastic Carrier• CY20-540• CY10-MC Cylinder
Oxy-Acetylene & Air-FuelWelding/Brazing/Heating/Cutting
• 141TA Torch Handle• GF11 Air/Gas Adaptor• 141C Cutting Attachment• 171W-2 Welding Tip• G17-VMA-1 Rosebud Tip• 172C-0 Cutting Tip• 210X-80-A Oxy Reg.• 9-WG6G Goggles• 25-300 Striker• 7S-5TA Air/Gas Tip• HW23-012A Hose• 24-CV5PR
Torch End Check Valve
OUTFIT NUMBER COMPONENT
KA90• GRAB2 B Acet. Reg.
KA90MC• 210Y-15-A MC Acet. Reg.
KA90MC-T• 210Y-15-A MC Acet. Reg.
• CRT10 Plastic Carrier
KA90MC-TC• 210Y-15-A MC Acet. Reg.• CRT10 Plastic Carrier• CY20-540• CY10-MC Cylinder
Oxy-AcetyleneWelding/Brazing/Heating/Cutting
• 141TA Torch Handle• 141C Cutting Attachment• 171W-2 Welding Tip• G17-VMA-1 Rosebud Tip• 172C-0 Cutting Tip• 210X-80-A Oxy. Reg.• HW23-012A Hose• 9-WG6G Goggles• 25-300 Striker• 24-CV5PR
Torch End Check Valve
OUTFIT NUMBER COMPONENT
KA90 SERIES
KAT90 SERIES
KAT90MC-TC
G17-VMA-1 Rosebud Tip
141TA Torch Handle
(w/out air fuel adaptor and air/gas tip)
(w/air fuel adaptor and air/gas tip)
Air Gas Tip
Air Gas adaptor
16
Oxy-Fuel ApparatusO
xy
-Fu
el
Ap
pa
ratu
s
GENTEC Torch Handles and Cutting Attachments are machined from high quality forgedbrass. Torch Handles feature Tube-in-a-Tube design for high handle strength. CuttingAttachments feature a spiral tube mixer design which optmizes the fuel/oxygen mixture.Stainless steel tubes and lever provide strength and durability. “A” hose fitting, 3/8”-24.
MODEL WEIGHT USES USES USESNUMBER CUTTING WELDING HEATING
LENGTH ATTACHMENT NOZZLE NOZZLE
140T 8 1/2 oz 141C 171W 171H
6”
141TA 13.3 oz 141C 171W 171H
7 3/4”
140TTorch Handle
141TATorch Handle
TORCH HANDLES
GF11, GF22 Air/Gas Adaptors easily converts Oxy-Fueltorch handles (140T & 141TA) to be used with screw connect and quick connect Air/Gas tips.
171W Series welding and brazing tips have red copper tip ends and are ideal for soldering,brazing, heating and hardfacing, etc. G17-VMA-1 Rosebud tips are multi-flamed tipsdesigned for heating in confined area.
Oxy-AcetyleneWelding and Brazing Tips
MODEL SIZENUMBER FITS AVAILABLE
140T &141TA 000-6
10CM 000-0
G17-VMA-1 140T &141TA 1
171WWelding & Brazing Tips
GF11Air/Gas Adaptor
G17-VMA-1 Rosebud Tip
171 SERIES
AIR/GAS ADAPTOR
Oxy-AcetyleneHeating Nozzles
MODEL SIZENUMBER FITS AVAILABLE
171H 140T & 141TA 2, 4, 6,171H Heating Nozzles
Rosebud Tips
For Technica l Per formance Data re fer toPage#36
GF22Air/Gas Adaptor
Quick Connect
Screw Connect
171W
17
www.genstartech.comOxy-Fuel Apparatus
Ox
y-F
ue
lA
pp
ara
tus
G17-FT Flexible Brazing Tip has 9” long flexible elbow that can be shaped to provideflexibility for various flame positions. It then can be reshaped for the next application.
Oxy-Acetylene Flexible Brazing Tips
MODELNUMBER FITS
G17-FT 140T & 141TA
G17-FTFlexible Brazing Tips
Oxy-Acetylene Mini-Style Brazing Tips
Mini-Style Oxy-Acetylene Brazing Tips arerugged and short designed to provide precise concentrated heat up to 6000˚F.
MODEL BRAZING OVERALLNUMBER CAPACITY LENGTH
GMTW-1 1/2” 3” 140T & 141TA &10CM
GMTW-2 1” 3” 140T & 141TA &10CM
GMTT 1” 4” 140T & 141TA &10CM
GMTR 1 1/2” 4” 140T & 141TA &10CM
GMTW Welding Tip GMTT Welding TipGMTR Rosebud Tip
MINI-STYLE TIPS
FLEXIBLE TIPS
G13-8VM Flexible Twin Heating Tip has two flexible elbows that can be shaped to provideflexibility for various flame positions. It then can be reshaped for the next application.
Oxy-Acetylene Flexible Twin Heating Nozzles
MODELNUMBER FITS
G13-8VM 140T & 141TA G13-8VMFlexible Twin Heating Nozzles
Multi-GasBrazing Heating Nozzles
MODEL SIZE REPLACEMENT GAS SIZENUMBER FITS AVAILABLE TIPS END SERVICE AVAILABLE
G17 140T &141TA 1-5 883TEN Oxy-Propane 0-5
883TE 0-5
883TEMFA 1-5Oxy-Acetylene
G17
883TEMFA883TE 883TEN
45º
90º
Oxy-Acetylene
For Technica l Per formance Data re fer toPage#36
881W
FITS
18
Cutting Attachment & TipsC
utt
ing
Att
ac
hm
en
t&
Tip
s
MAPP ® is a registered trademark of BOC Group, Inc.
141CCutting Attachment
MODEL WEIGHT USES USESNUMBER TORCH CUTTING
LENGTH HANDLE TIP
141C 13.8 oz 140T 172C/172CN
8 1/4” 141TA 172CM
GENTEC Cutting Attachments are machined from high quality forged brass.Cutting Attachments feature spiral tube mixer design which optmizes the mixture of fuel and oxygen. Stainless steel tubes and lever provide strength and durability.
GENTEC Cutting Tips are precision machined from high quality copper alloys for durability.The gas passages for single-piece acetylene tip are accurately swaged-formed and shapedon polished mandrels in order to provide smooth and efficient gas flow. The two-piece tip for alternative fuel gases featuring an internal spline configuration of the latest design offersoptimum cutting performances. All tips are 100% tested.
GAS MODEL SIZE TYPE FITSSERVICE NUMBER AVAILABLE
Acetylene 172C 00-2 1-Piece 141C
Natural Gas/Propane 172CN 0-2 2-Piece 141C
Propylene/MAPP® 172CP 0-2 2-Piece 141C
172CCutting Tips
172CNCutting Tips
172CPCutting Tips
CUTTING ATTACHMENT
CUTTING TIPS
For Technica l Per formance Data re fer toPage#36-37
19
www.genstartech.comThe Compact TorchTM Kits
Th
eC
om
pa
ct
To
rch
TM
Kits
MAPP ® is a registered trademark of BOC Group, Inc.
Gentec Compact TorchTM gets you into tight spaces and allows you to do more precise workthan any other torch on the market! The Compact Torch's small size, chrome-plated brasstorch handle with stainless steel internal tubing and copper tips provides the durability youneed. The easily maneuverable 12-foot extra flexible hose has “B” fittings for larger regulator connections. “A” fitting adaptors for light/medium duty regulators are includedwith all Compact Torch Kits. Optional torch tips can use Oxy-Acetylene, Oxy-Propane orOxy-MAPP® gas.
• Lightweight durable construction with chrome-platedbrass body and stainless steel inner gas tubes
• Easy manipulation in tight spaces• Tips have double o-ring seats to insure leak-proof
connections• Designed to braze and solder the smallest jobs up to
1 1/4” copper tubing• Oxy-Acetylene and Oxy-Fuel Kits• Durable and extra flexible hoses with “B” connections
(“A” adaptors included in all kits)
OXY-ACETYLENE ANTI-THEFT PACKAGING
KCMA16TCSPGas Service: Acetylene
Torch Handle: 10CM
Tips: 10CMP-GMTT,
10CMP-GMTR,
10CMP-4, 10CMP-6
Hose: HST18-12 (12’)
Oxy Regulator: 210X-80
Fuel Regulator: 210Y-15
Cylinder Oxygen, Acet: CY20-540, CY10-MC
w/Tank Wrench
Cylinder Carrier: CRT10
Check Valves: 24-CV9PR
KCMA16TCSP
20
The Compact TorchTM KitsT
he
Co
mp
ac
tT
orc
hT
MK
its
MAPP ® is a registered trademark of BOC Group, Inc.
MODEL GAS TORCH TIPS HOSE OXYGEN FUEL
NUMBER SERVICE HANDLE REGULATOR REGULATOR
KCMA04SP Acetylene 10CM 10CMP-4 HST18-12 N/P* N/P*
KCMA26SP Acetylene 10CM 10CMP-GMTT, 10CMP-GMTR, 10CMP-4, 10CMP-6 HST18-12 N/P* N/P*
KCMA16-BSP Acetylene 10CM 10CMP-4 HST18-12 210X-80 210Y-15-5
KCMA16SP Acetylene 10CM 10CMP-GMTT, 10CMP-GMTR, 10CMP-4, 10CMP-6 HST18-12 210X-80 210Y-15
KCMP16SP Prop./MAPP® 10CM 10CMP-GMTT, 10CMP-GMTR, 10CMP-3, 10CMP-7 HST18-12 210X-80 210F-80
KCMA16SP KCMA26SP KCMA04SP
OXY-ACETYLENE & OXY FUEL KITS
N/P * - Not Provided
Check Valves are included in all kits.
210X-80 (Rear Mount)Gas Service: Oxygen (CGA 540)
210Y-15-5 (Rear Mount)Gas Service: Acetylene (CGA 520)B
210Y-15 (Rear Mount)Gas Service: Acetylene (CGA 200)MC
210F-80 (Rear Mount)Gas Service: Propane/MAPP® (CGA 510)
HST18-12 Dual HoseGas Service: Oxy/FuelModel Number (I.D./Length): HST18-12 ( 1/8”/12’)Fitting: 9/16”- 18 “B” ConnectionReplacement Hose and Sheath(Sold as pair only)
210Y-15
REGULATORS
REPLACEMENT HOSE
HST18-12
10CM-H1210CM Torch w/ HST18-12dual hose
TORCH W/REPLACEMENT HOSE
21
www.genstartech.comThe Compact TorchTM Kits
Th
eC
om
pa
ct
To
rch
TM
Kits
MAPP ® is a registered trademark of BOC Group, Inc.
10CMGas Service: Oxy-Acetylene/Oxy-Fuel
10CMP-2Gas Service: AcetyleneFits Torch Handle: 10CMModel Number (Size): 10CMP-2 (#2)
10CMP-3~10CMP-7Gas Service:Acetylene / Propane / MAPP®
Fits Torch Handle: 10CMModel Number (Size): 10CMP-3 (#3) 10CMP-6 (#6)10CMP-4 (#4) 10CMP-7 (#7)10CMP-5 (#5)
10CMP-GMTRGas Service: AcetyleneFits Torch Handle: 10CMLength: 3”Multi-Flame Orifice (Rosebud)
10CMP-GMTTGas Service:Acetylene/ Propane / MAPP®
Fits Torch Handle: 10CM
Note:hoses sold separately
Approx. Feather Flame Characteristics
#2
#3
#4
#5
#6
#7
COMPACT TORCHTM
Brazing Tip Comparison Chart
10CMP BRAZING CAPACITY FOR COPPER W-JCOMPARISON
#2 1/8”-1/4” N/A
#3 1/8” - 1/2” (3-12mm) 000
#4 1/8” - 3/4” (3-19mm) 00
#5 1/4” - 7/8” (6-23mm) 0
#6 1/4” - 1” (6-26mm) 1
#7 3/8” - 11/8” (10-29mm) 2
GMTT 1/4” - 1” (6-26mm) N/A
GMTR 3/8” - 11/4” (10-32mm) N/A
TORCH VALVE STEMSOXYGEN(Green): T10-82B
FUEL(RED): T10-83B
REPLACEMENT-O-RINGSLARGE: T110-26
SMALL: T110-27
10CM
CURVED-TORCH TIPS
TWIN TIP HEATING TIP
TORCH HANDLE
TIP COMBOS - SKIN PACKAGED
10CMP-C4SP4 Tips included:10CMP-GMTT (Twin Tip), 10CMP-GMTR(Multi-Flame), 10CMP-4, 10CMP-6 (Curved Torch Tips Size 4 & 6)Gas Service: Acetylene
10CMP-C3SP4 Tips included:10CMP-GMTT (Twin Tip), 10CMP-GMTR (Multi-Flame),10CMP-3, 10CMP-7 ( Curved Torch Tips Size 3 & 7)Gas Service: Propane / MAPP®
1
www.genstartech.comAir Propane/Mapp® Outfits
Air
Ac
ety
len
eO
utfits
MAPP ® is a reg is tered t rademark o f A i r co , I nc .
Donot use thispage, Start fromPage 22
22
RegulatorsR
eg
ula
tors
Propane
Oxygen
Acetylene
Regulators feature a compact rear entry design to meet the demands of specialinstallation. These regulators are ideal for light and medium duty gas welding,cutting and heating applications.
210Y-15
GAS MODEL MAX. INLET MAX. DELIVERY INLET OUTLET INLET OUTLETSERVICE NUMBER PRESSURE (PSI) PRESSURE (PSI) GAUGE GAUGE CONNECTION CONNECTION
210F-80 400 4~80 2”, 400PSI 2”, 100PSI CGA510 REAR 9/16”-18LH(M)
210X-80 3000 4~80 2”, 4000PSI 2”, 100PSI CGA540 REAR 9/16”-18RH(M)
210X-80-A 3000 4~80 2”, 4000PSI 2”, 100PSI CGA540 REAR 3/8”-24RH(M)
210Y-15 400 2~15 2”, 400PSI 2”, 30PSI, RL CGA200”MC”REAR 9/16”-18LH(M)
210Y-15-A 400 2~15 2”, 400PSI 2”, 30PSI, RL CGA200”MC”REAR 3/8”-24LH(M)
GRAMC2 400 2~15 2”, CONTENT 2”, 30PSI, RL CGA200”MC”REAR 3/8”-24LH(M)
210Y-15-510A 400 2~15 2”, 400PSI 2”, 30PSI, RL CGA510 REAR 3/8”-24LH(M)
210Y-15-510B 400 2~15 2”, 400PSI 2”, 30PSI, RL CGA510 REAR 9/16”-18LH(M)
210Y-15-300A 400 2~15 2”, 400PSI 2”, 30PSI, RL CGA300 REAR 3/8”-24LH(M)
210Y-15-300B 400 2~15 2”, 400PSI 2”, 30PSI, RL CGA300 REAR 9/16”-18LH(M)
GRAB2 400 2~15 2”, CONTENT 2”, 30PSI, RL CGA520 REAR 3/8”-24LH(M)
• Rear entry inlet construction.
• Body is machined from class “A” brass bar stock.
• Chrome-plated housing cap.
• Internal safety pressure relief valve.
• Sintered bronze inlet filter.
• Stem type seat assembly for more reliable seating.
• Plastic adjustment knob for smooth “easy touch”
pressure setting.
• 2” gauge and 1 1/4” diaphragm.
• UL listed.
210 SERIES REGULATORS
210X-80
For Technica l Per formance Data re fer toPage#37
23
www.genstartech.comRegulators & Gauges
Re
gu
lato
rs &
Ga
ug
es
Regulators are designed for purging/pressure testing with Nitrogen (“IN” series) orCarbon Dioxide (“C” series).
*Refer to “Nitrogen Purge & Blow Gun Kits” section for complete kits.For Technical Performance Data refer page#37
452C-175
452 NITROGEN & CO2 PURGING SERIES REGULATORS*
• 2” gauge and 2 3/4” diaphragm.
• Stem type seat assembly for more
reliable seating.
• Forged brass body.
• Chrome-plated housing cap.
• Self re-seating external pressure relief valve.
• Sintered bronze inlet filter.
• UL listed.
CarbonDioxide
Nitrogen
GAS MODEL MAX. INLET MAX. DELIVERY INLET OUTLET INLET OUTLETSERVICE NUMBER PRESSURE (PSI) PRESSURE (PSI) GAUGE GAUGE CONNECTION CONNECTION
452C-175 3000 5~175 2”, 4000PSI 2”, 300PSI CGA320 5/8”-18RH(F)
452C-175-F 3000 5~175 2”, 4000PSI 2”, 300PSI CGA320 1/4” SAE FLARE
452C-300 3000 20~300 2”, 4000PSI 2”, 400PSI CGA320 5/8”-18RH(F)
452C-300-F 3000 20~300 2”, 4000PSI 2”, 400PSI CGA320 1/4” SAE FLARE
452IN-175 3000 5~175 2”, 4000PSI 2”, 300PSI CGA580 5/8”-18RH(F)
452IN-175-F 3000 5~175 2”, 4000PSI 2”, 300PSI CGA580 1/4” SAE FLARE
452IN-300 3000 20~300 2”, 4000PSI 2”, 400PSI CGA580 5/8”-18RH(F)
452IN-300-F 3000 20~300 2”, 4000PSI 2”, 400PSI CGA580 1/4” SAE FLARE
452IN-450 3000 30~450 2”, 4000PSI 2”, 600PSI CGA580 5/8”-18RH(F)
452IN-450-F 3000 30~450 2”, 4000PSI 2”, 600PSI CGA580 1/4” SAE FLARE
REPLACEMENT STEEL CASE GAUGES
MODEL SIZE SCALE SCALE CASE ENTRYNUMBER (IN) RANGE TYPE COLOR TYPE
GR15-FC 1.5 CONTENT SINGLE GOLD REAR
G20-030RL 2.0 0~30 PSI RED DUAL GOLD SIDE
G20-FC 2.0 CONTENT SINGLE GOLD SIDE
G20-F060 2.0 0~60 PSI SINGLE BLACK SIDE
G20-100 2.0 0~100 PSI DUAL GOLD SIDE
G20-300 2.0 0~300 PSI DUAL GOLD SIDE
G20-400 2.0 0~400 PSI DUAL GOLD SIDE
G20-600 2.0 0~600 PSI DUAL GOLD SIDE
G20-4000 2.0 0~4000 PSI DUAL GOLD SIDE
G20-4000
G20-030RL G20-FC
1/4” NPT Inlet for Industrial Gas Regulators (Oxygen Cleaned).
GR15-FC
locking adjusting screwsR230-03452 Series
24
RegulatorsR
eg
ula
tors
MAPP ® is a registered trademark of BOC Group, Inc.
101 SERIES INDUSTRIAL GAS REGULATORS
• Body is machined from class “A” brass bar stock. • Sintered bronze inlet filter. • Conical style seat assembly for reliable seating. • Plastic adjustment knob for smooth “easy touch”
pressure setting.
Acetylene
MAPP®/Propane
• Body is machined from class “A” brass bar stock. • Sintered bronze inlet filter. • Conical style seat assembly for reliable seating. • Plastic adjustment knob for smooth “easy touch”
pressure setting. • 2” gauge and neoprene diaphragm.
Acetylene
MAPP®/Propane
101F-510B
101Y-BA
301F-510A
301Y-BA
GAS MODEL MAX. INLET MAX. DELIVERY INLET OUTLET INLET OUTLETSERVICE NUMBER PRESSURE (PSI) PRESSURE (PSI) GAUGE GAUGE CONNECTION CONNECTION
(GR15-FC)
101Y-510A 400 2~15 CONTENT NONE CGA510 3/8”-24LH(M)
101Y-BA 400 2~15 CONTENT NONE CGA520”B” 3/8”-24LH(M)
101Y-MCA 400 2~15 CONTENT NONE CGA200”MC” 3/8”-24LH(M)
101F-510B 400 2~60 NONE NONE CGA510 9/16”-18LH(M)
GAS MODEL MAX. INLET MAX. DELIVERY INLET OUTLET INLET OUTLETSERVICE NUMBER PRESSURE (PSI) PRESSURE (PSI) GAUGE GAUGE CONNECTION CONNECTION
(G20-FC) (G20-F060)
301Y-BA 400 2~15 2”, CONTENT NONE CGA520”B” 3/8”-24LH(M)
301Y-MCA 400 2~15 2”, CONTENT NONE CGA200”MC” 3/8”-24LH(M)
301F-510A 400 5~60 NONE 2”, 60PSI CGA510 3/8”-24LH(M)
301F-510B 400 5~60 NONE 2”, 60PSI CGA510 9/16”-18LH(M)
301 SERIES INDUSTRIAL GAS REGULATORS
25
www.genstartech.comRegulator Inlet & Outlets Accessories
Re
gu
lato
r Inle
t & O
utle
ts A
cc
es
so
ries
GENTEC Regulator Inlets, Outlets & Accessories are made of high quality brass andprecision machined to fit applicable CGA specifications. All inlet stems have a 45micron sintered bronze filter and are interchangeable with other regulators.
CGA 300 “COMMERCIAL”Acetylene Pressures up to 500 psi
CGA REGULATOR INLET NUTS & NIPPLES
CGA 200 “MC” TANKAcetylene Pressures up to 500 psi
RNT305-2
• NUT• Ref.# 305-2
RNP305-3A
• NIPPLE w/Filter• Ref.# 305-3A• Size: 1 1/8”• 1/8” NPT
RNT16-2
• NUT• Ref.# 16-2
RNP16-8SF
• NIPPLE w/Filter• Ref.# 16-8SF• Size: 3”• 1/4” NPT
CGA 510 “P.O.L.”Acetylene, MAPP® and PropanePressures up to 500 psi
• NUT• Ref.# 15-2
RNT15-2
RNP15-3SF
• NIPPLE w/Filter• Ref.# 15-3SF• Size: 3”• 1/4” NPT
CGA 520 “B” TANKAcetylene Pressures up to 500 psi
• NUT• Ref.# 300-2
• NIPPLE w/Filter• Ref.# 300-3SF• Size: 1 1/4”• 1/4” NPT
RNT300-2
RNP300-3SF
CGA 320 Carbon Dioxide Pressures up to 3000 psi
• NUT• Ref.# CO2
RNTCO2
RNPCO3-SF
• NIPPLE w/Filter• Ref.# CO3-SF• Size: 2”• 1/4” NPT
RNPCO6N
• WASHER, NYLON• Ref.# CO6N
MAPP ® is a registered trademark of BOC Group, Inc.
26
Regulator Inlet & Outlets AccessoriesR
eg
ula
tor
Inle
t &
Ou
tle
ts A
cc
es
so
rie
s
CGA REGULATOR INLET NUTS & NIPPLES
RNP15-3SF
CGA 540 Oxygen Pressures up to 3000 psi
RNT62
RNP66-SF
• NIPPLE• Ref.# 66-SF• Size: 2-1/2”• 1/4” NPT
RNT92
• NUT• Ref.# 92
CGA 580 Inert Gas Pressures up to 3000 psiArgon, Helium, Nitrogen
• NIPPLE W/Filter• Ref.# 15-3SF• Size: 3”• 1/4” NPT
CGA REGULATOR OUTLET BUSHING
Oxygen “B” size9/16”-18 RH x 1/4” NPT
Oxygen “A” size3/8”- 24 RH x 1/4” NPT3/8”- 24 RH x 1/8” NPT
Acetylene/MAPP®/ Propane“B” size9/16”-18 LH x 1/4” NPT
Acetylene “A” size3/8”- 24 LH x 1/4” NPT3/8”- 24 LH x 1/8” NPT
Barbed3/16” BARB x 1/4” NPT
SAE flared1/4” - 45º FLARE x 1/4” NPT
Inert gas5/8” - 18 RH x 1/4” NPT
ROB32
ROB33
ROB134ROB133
ROB135ROB137
ROB316
ROB48F
ROB34
• NUT• Ref.# 62
27
www.genstartech.comRegulator Accessories & CGA Adapters
Re
gu
lato
r Ac
ce
ss
orie
s &
CG
A A
da
pte
r
ACETYLENE TO ACETYLENECylinder CGA 510 “POL”Regulator CGA 300 “COMM”Reference Number: NO.15
CGA CYLINDER TO REGULATOR ADAPTERS
24-0015
24-0016
ACETYLENE TO ACETYLENECylinder CGA 300 “COMM”Regulator CGA 510 “POL”Reference Number: NO.16
24-0051
ACETYLENE TO ACETYLENECylinder CGA 510 “POL”Regulator CGA 300 “COMM”Reference Number: NO.51
24-0061
ACETYLENE TO ACETYLENECylinder CGA 300 “COMM”Regulator CGA 510 “POL”Reference Number: NO.61
24-0306
ACETYLENE TO ACETYLENECylinder CGA 520 “B”Regulator CGA 200 “MC”Reference Number: NO.306
24-0315
ACETYLENE TO ACETYLENECylinder CGA 510 “POL”Regulator CGA 520 “COMM”Reference Number: NO.315
ACETYLENE TO ACETYLENECylinder CGA 520 “BL”Regulator CGA 510 “POL”Reference Number: NO.31724-0317
24-0318
ACETYLENE TO ACETYLENECylinder CGA 520 “B”Regulator CGA 510 “POL”Reference Number: NO.318
24-0319
ACETYLENE TO ACETYLENECylinder CGA 520 “B”Regulator CGA 300 “COMM”Reference Number: NO.319
24-0321
ACETYLENE TO ACETYLENECylinder CGA 200 “MC”Regulator CGA 510 “POL”Reference Number: NO.321
24-0806
CO2 TO INERT GASCylinder CGA 320 Regulator CGA 580 Reference Number: NO.806
24-0810
INERT GAS TO CO2
Cylinder CGA 580Regulator CGA 320Reference Number: NO.810
24-1690
ACETYLENE TO ACETYLENECylinder CGA 300 “COMM”Regulator CGA 510 “POL”Reference Number: NO.1690
“Y” CONNECTIONS
24-0101
OXYGENB-Size Inlet 9/16” - 18B-Size Outlets 9/16” - 18Reference Number: NO.101
24-0102
ACETYLENEB-Size Inlet 9/16” - 18B-Size Outlets 9/16” - 18Reference Number: NO.102
OXYGEN WITH VALVESB-Size Inlet 9/16” - 18B-Size Outlet 9/16” - 18Reference Number: NO.111
24-0111
24-0112
ACETYLENE WITH VALVESB-Size Inlet 9/16” - 18B-Size Outlet 9/16” - 18Reference Number: NO.112
24-0314
ACETYLENE TO ACETYLENECylinder CGA 200 “MC”Regulator CGA 520 “B”Reference Number: NO.314
28
Hose Repair Kits & Crimping ToolsH
os
e R
ep
air
Kit
s &
Cri
mp
ing
To
ols
GENTEC Hose Repair Kits are designed andoutfitted to allow timely hose repair in theshop or in the field. A tough polyethylenecase holds the components: Hose nuts, nipples (A & B sizes), splicers, couplers andvarious sized ferrules most commonly usedon 3/16” and 1/4” hoses. Kits are equippedwith 2 types of Crimping Tools. A display cardwith the fitting numbers and the compartment location is on both the insideand outside of the case lid for added convenience in selecting and reordering. CK-5SP
CK1-1SP
KITS WITH “A” & “B” TYPE FITTINGS - ITEM NUMBERS INCLUDED IN KITS
MODEL #C-1 #C-5 #7 #8 #9 #10 #17 #18 #19 #30 #31 #44 #45 #130 #131 #769 #7325 #7326NUMBER QTY. QTY. QTY. QTY. QTY. QTY. QTY. QTY. QTY. QTY. QTY. QTY. QTY. QTY. QTY. QTY. QTY. QTY.
CK-1SP 1 -- 8 8 4 4 10 6 8 1 1 4 2 1 1 12 10 10
CK-5SP -- 1 8 8 4 4 10 6 8 1 1 4 2 1 1 12 10 10
HOSE REPAIR KITS
GENTEC Crimping Tools are ideal for shop and field repair of hoses. They are madeof nickel-plated high alloy steel with a one piece forged jaw for super strength.
C-1C-5
MODELNUMBER DESCRIPTION
C-1 3/16”, 1/4” HAMMER OR VISE TYPE
C-5 3/16”, 1/4” V-GRIP PLIER TYPE
CRIMPING TOOLS
29
www.genstartech.comFlashback Arrestors
Fla
sh
ba
ck
Arre
sto
rs
GENTEC Flashback Arrestors are specially designed to prevent personal injury and damage to equipment from flashbacks. GENTEC Flashback Arrestors are available for regulators and torches.
MODEL GAS WORKING CAPACITY FLOWNUMBER FITS SERVICE PRESSURE (PSI) (SCFH) FITTING
FA5TF TORCHES ACETYLENE/FUEL 15 70 3/8”-24LH
FA5TO TORCHES OXYGEN 145 706 3/8”-24RH
FA5RF REGULATORS ACETYLENE/FUEL 15 70 3/8”-24LH
FA5RO REGULATORS OXYGEN 145 706 3/8”-24RH
• Outlet connection: 3/8”-24LH for Acetylene and Fuel gas models.3/8”-24RH for Oxygen models.
• Sintered Metal filtered elements to prevent flashbacks.
• Built-in automatic reset Non-return valve prevents reverse flow of gases by temporarily cutting off the flow.
FUELFA5TF
OXYGENFA5TO
FUELFA5RF
Fit Torches
OXYGENFA5RO
Fit Regulators
FLASHBACK ARRESTORS
PAIRFA5TPR
PAIRFA5RPR
Check ValvesC
he
ck
Va
lve
30
GENTEC Check Valves prevent reverse flow of gases which can causedangerous mixtures. Choose from two styles to fit your needs: • 24-CV5 Series attach to the torch with 3/8”-24 “A” fitting.• 24-CV9 Series attach to the current regulator outlet bushings. (Use in all The Compact TorchTM kits)
CHECK VALVES
OXYGEN24-CV5TO
FUEL24-CV5TF
TORCH END CHECK VALVES“A” Fitting
REGULATOR BUSHINGADAPTOR CHECK VALVES
OXYGEN24-CV9RO
FUEL24-CV9RF
PAIR 24-CV9PR
PAIR24-CV5PR
Note: CChheecckk VVaallvveess aarree nnoott ffllaasshhbbaacckk aarrrreessttoorrss and should notbe used as such! GENTEC recommends the use of check valvesbetween the torch and the regulator at all times.
REGULATOR BUSHINGADAPTOR CHECK VALVES
OXYGEN24-CV8RO
FUEL24-CV8RF
PAIR 24-CV8PR
“B” Fitting
31
www.genstartech.comMul-T-Torch Air Propane Torch Outfit
Mu
l-T-T
orc
h A
ir Pro
pa
ne
To
rch
Ou
tfit
• Designed for heavy-duty outdoor applications.• Large volume of heat (up to 500,000 BTUs) is provided for weed burning, ice melting, asphalt
removal and many other applications.• For use with standard 20lb Bar-B-Que liquid propane tanks.• All steel torch handle and torch head.• P.O.L. Check Valve shuts off flow when hose is accidentally cut or melted.• 10” Durable Hose and Single-Flint Striker are included in the outfit.• Brass control knob will not freeze up in cold weather.• For use with Propane only.
MODEL DESCRIPTIONNUMBER
WB-500T 500K BTU Replacement Torch with Brass Valve
HWB-10CV 10’ Replacement Hose with P.O.L. Safety Valve
24-CVWB Excess Flow Safety Valve
Kit Components
All SteelTorch
Handle
Excess FlowSafety Valve
Single FlintStriker
10’ Durable Hose9/16”-18 LHBrass Fitting
All SteelTorch Head
BrassControlValve
WBK-500 (MUL-T-TORCH)TM AIR PROPANE TORCH OUTFIT
32
Cylinders and Carry StandsC
yli
nd
ers
an
d C
arr
y S
tan
ds
Acetylene
Oxygen
Nitrogen
PropaneMAPP®
GAS MODEL CAPACITY CGA TYPESERVICE NUMBER (CU. FT.) CONNECTION
CY40-B 40 CGA520 B
CY10-MC 10 CGA200 MC
CY20-540 20 CGA540 R
CY40-540 40 CGA540
CY20-580 20 CGA540
CY40-580 40 CGA580
CY14-600 14.1 oz. CGA600 Non-Refill
CY16-600 16 oz. CGA600 Non-Refill
Al l cy l inders sh ipped empty except CY14-600 and CY16-600
(Easy storage for handle, hose, striker and tips)
CY20-540“R” Oxygen
CY40-540“TYPE 40” Oxygen
CY40-580Nitrogen
CY20-580Nitrogen
CY40-B“B” Acetylene
CY10-MC“MC” Acetylene
CRT10 Plastic StandFits CY10-MC & CY20-540
CRT10MC Steel StandFits CY10-MC or CY16-600
CRT40B Steel StandFits CY40-B
CYLINDERS AND TANKS
CYLINDER CARRY STANDS
MAPP ® is a registered trademark of BOC Group, Inc.
16”
13”
12”
17”24”
Approx.Size
CY14-600Propane
CY16-600MAPP®
33
www.genstartech.comTip Cleaners & Hoses
Tip
Cle
an
ers
& H
os
es
MAPP ® is a registered trademark of BOC Group, Inc.
25-130
MODEL NO. OF WIRE WIRE DRILLNUMBER DESCRIPTION WIRES LENGTH SIZE SIZE
25-120 Standard 13 2 3/4” 6-26 77-49
25-121 Master 21 2 3/4” 1-21 77-30
25-130 King Size 13 4 1/2” 6-26 77-49
25-120
25-121
GENTEC “WIRE-O” Tip Cleaner Sets feature blue anodized aluminum covers, stainlesssteel wire tapered ends for easy entry, and uniform ridges for optimum cleaning. “Wire-O”tip cleaners are 5/8” longer than standard sized cleaners for more efficient cleaning oflonger channels.
TIP CLEANERS
I.D. LENGTH CONNECTION
OXY-ACETYLENE GRADE “R” TWIN HOSES
HW23-012 3/16” 12’ B
HW23-012A 3/16” 12’ A
HW24-050 1/4” 50’ B
OXY-LP GAS GRADE “T” TWIN HOSES
HW23-T012A 3/16” 12’ A
HW23-T020 3/16” 20’ B
HW24-T020 1/4” 20’ B
HW24-T025 1/4” 25’ B
I.D. LENGTH CONNECTION
ACETYLENE SINGLE HOSES
HGA-012A 3/16” 12’ A
LP GAS SINGLE HOSES
HGP-012 3/16” 12’ B
HW23-012A Hose
HGA-012A Hose
MODELNUMBER
MODELNUMBER
WELDING & SOLDERING HOSES
34
Strikers, Goggles, WrenchesS
trik
ers
, G
og
gle
, W
ren
ch
es
DESCRIPTION
25-300 Single-Flint Spark Lighter
25-301 Single Flint Renewals, 5/CD
25-450 Triple-Flint Spark Lighter
25-451 Triple Flint Renewals
25-450Triple-Flint Striker
25-451Replacement Triple-Flint
MODELNUMBER
25-300Single-Flint Striker
25-301Replacement Single-Flint
STRIKERS AND REPLACEMENT FLINTS *To order skin package, add “SP” after the modelnumber (Example: 25-300SP)
9-WG1PSoft and Flexible Frame
Welding Goggles(Meet BS2092.1)
9-WG6GEye Cup Style
Welding Goggles(Meet ANSI Z87.1)
20-G202CImpact Safety Goggles
(Meet ANSI Z87.1)20-1610-5Lift Front Cup StyleWelding Goggles
(Meet ANSI Z87.1)
WELDING AND SAFETY GOGGLE
27-101310-way CGA wrench w/
Socket for commercial acetylene;3/8” Socket (actual .390)
27-0005B-KEY: 3-1/8” long box wrench for B & MC cylinders; 3/16” box (actual .194), Cadmium-Plated
CYLINDER WRENCHES
35
www.genstartech.comNitrogen Purge & Blow Gun Kits
Nitro
ge
n P
urg
e &
Blo
w G
un
Kits
GENTEC Nitrogen Purging and Blow Gun Kits include a chrome-plated compressed airblow gun with Standard Safety Tip and solid brass internal parts. The blow gun is light-weight and designed to fit comfortably in the user’s hand. It complies with OSHA 1910.242band 1910.95 which require that compressed air be limited to 30 PSI at the nozzle outlet. Thesafety tip includes a safety by-pass which prevents excessive pressure build-up in the gunif the nozzle becomes clogged. Accessories, such as high or low-pressure regulators,blow gun hose, standard safety tip, rubber tip for blowing out lines and 6” extension nee-dle tip are available. GENTEC Nitrogen Purging and Blow Gun Kits include choices forhigh-pressure regulators for Nitrogen and carrying cases for 20 or 40 cu. ft. cylinders.
GKNP
GKNP20-TC GKNP20-T
• CY20-580 20 cu. Ft. Tank, empty • CRT20N Cylinder Carrying Case
• CRT20N Cylinder Carrying Case • GKNP kit
• GKNP kit
GKNP40-TC GKNP40-T
• CY40-580 40 cu. Ft. Tank, empty • CRT40N Cylinder Carrying Case
• CRT40N Cylinder Carrying Case • GKNP kit
• GKNP kit
• HBG-6 Blow Gun Hose (6ft.)
• B306 OSHA Rated Blow Gun with Safety Tip
• 452IN-450F Nitrogen Regulator
KIT NUMBER
GKNP40-TC Kit
GKNP NITROGEN PURGE & BLOW GUN KITS
Refer to Regulator Section For Purging Regulator
MODEL NUMBER DESCRIPTION
B306 Blow Gun with Safety Tip, 1/4” F Inlet, 1/8” F Outlet
B300 Blow Gun without Safety Tip (BT6S)
BT6S Standard Safety Tip (Used on B300)
BT2 Rubber Tip for flowing-out lines (Used on B300)
BX6 6” Extension Needle Tip (Used on B300)
HBG-6 6 ft. Blow Gun Hose
CRT20N 20 cu. Ft. Cylinder Carrying Case
CRT40N 40 cu. Ft. Cylinder Carrying Case
�CR T20N CRT40N HBG-6 BX6
B306 BT6S
BT2
BLOW GUN ACCESSORIES
16”
12”
12”
16”
GKNP
36
Da
ta &
Ch
art
s
Tip Oxygen Acetylene Oxygen Acetylene/FuelSize (PSIG) Fuel (PSIG) (SCFH) (SCFH)
2 4/8 4/8 3/10 3/94 8/12 6/10 7/22 6/206 10/15 8/12 15/44 14/40
Tip Metal Drill Oxygen Acetylene AcetyleneSize Thickness Size (PSIG) (PSIG) (SCFH)
000 UP TO 1 - 32” 75(.022) 3/5 3/5 1/200 1/16” - 3/64” 70(.028) 3/5 3/5 1-1/2/30 1/32” - 5/64” 65(.035) 3/5 3/5 2/41 3/64” - 3/32” 60(.040) 3/5 3/5 3/62 1/16” - 1/8” 56(.046) 3/5 3/5 5/103 1/8” - 3/16” 53(.060) 4/7 3/6 8/184 3/16” - 1/4” 49(.073) 5/10 4/7 10/255 1/4” - 1/2” 43(.089) 6/12 5/8 15/356 1/2” - 3/4” 36(.106) 7/14 6/9 25/45
Data & Charts
171W, G17
171H
Model Oxygen Acetylene Acetylene Brazing Capacity Number (PSIG) Fuel (PSIG) (SCFH) for Copper
GG1177--VVMMAA--11 15 12 30 1/2” - 6”
GG1177--FFTT 5 5 4 Up to 7/8”
GG1133--88VVMM 25 15 60 4” to 12”
G17-VMA-1, G17-FT, G13-8VM
Tip Metal Cutting Speed Cutting Oxygen Cutting Oxygen Pre-Heat Oxygen Pre-Heat Oxygen Acetylene AcetyleneSize Thickness (IN / MIN) (PSIG) (SCFH) (PSIG) (SCFH) (PSIG) (SCFH)
00 1/4” 27 / 30 20 / 25 30 / 35 3 / 5 4 / 6 3 / 5 4 / 60 3/8” 24 / 28 25 / 30 55 / 60 3 / 5 5 / 9 3 / 5 5 / 80 1/2” 20 / 24 30 / 35 60 / 65 3 / 6 7 / 11 3 / 5 6 / 101 3/4” 17 / 21 30 / 35 80 / 85 4 / 7 9 / 14 3 / 5 8 / 102 1” 15 / 19 35 / 40 140/ 150 4 / 9 11 / 18 3 / 6 10 / 162 1-1/2” 13 / 17 40 / 45 150 / 160 4 / 12 13 / 20 3 / 7 12 / 18
172C
37
www.genstartech.comData & Charts
Da
ta &
Ch
arts
Tip Metal Cutting Speed Cutting Oxygen Cutting Oxygen Pre-Heat Oxygen Pre-Heat Oxygen Fuel Gas Fuel GasSize Thickness (IN / MIN) (PSIG) (SCFH) (PSIG) (SCFH) (PSIG) (SCFH)
0 3/8” 20 / 24 25 / 30 45 / 55 N / A 23 / 108 3 / 5 8 / 100 1/2” 18 / 22 30 / 35 50 / 55 N / A 23 / 108 3 / 5 8 / 101 3/4” 15 / 20 30 / 35 70 / 80 N / A 23 / 108 4 / 6 10 / 122 1” 14 / 18 35 / 40 115 / 125 N / A 23 / 108 4 / 8 12 / 152 1-1/2” 12 / 16 40 / 45 125 / 135 N / A 23 / 108 5 / 9 12 / 15
172CN, 172CM
0 500 1000 1500
10
20
30
40
50
60
70
80
FLOW(SCFH)
DEL
IVER
Y PR
ESSU
RE(
PSIG
)
MODEL NO.:210 SERIESINLET PRESSURE(AIR 70˚F)
2000PSIG400PSIG
200PSIG
0 500 1000 1500 2000
200
220
240
260
280
300
320
340
360
380
400
2500 3000 3500 4000 4500 5000
420
440
460
FLOW(SCFH)
DEL
IVER
Y PR
ESSU
RE(
PSIG
)
MODEL NO.:452 SERIESINLET PRESSURE(AIR 70˚F)
2000PSIG
Model 210 Series Regulator
Model 452 Series Regulator
38
Catalog Index & Comparison Chart
Ca
talo
g In
de
x &
Co
mp
aris
on
Ch
art
Model
NumberPP
EquivalentNumber
Model
NumberPP
EquivalentNumber
Model
NumberPP
EquivalentNumber
101F-510B 24 (V) 00-3-101 24-CV9RF 30 (U) RCV-101
101Y-510 24 (T) AR-510 172C-1 18 (T) 182-01P (W) CV-31L
101Y-BA 24 (T) AR-B (U) 1-5-101 24-CV9RO 30 (U) RCV-100
101Y-MCA 24 (T) AR-MC (V) 1-3-101 (W) CV-31R
10CM 21 172C-2 18 (T) 183-01P 25-120 33 (E) 751F00
10CM-H12 20 (U) 2-5-101 (G) MP-37A
10CMP-2 21 (V) 2-3-101 (U) TCSD
10CMP-3 21 172CM-0 18 (T) 172-01P 25-121 33 (U) TCMD
10CMP-4 21 (U) 0-5-200M 25-130 33 (U) TCLD
10CMP-5 21 (V) 0-GPM 25-1410-5 34
10CMP-6 21 172CM-1 18 (U) 1-5-200M 25-300 34 (E) 790F34
10CMP-7 21 (V) 1-GPM (G) MP-1
10CMP-C3SP 21 172CM-2 18 (U) 2-5-200M (SF) TX405
10CMP-C4SP 21 (V) 2-GPM (T) L-1
10CMP-GMTR 21 172CN-0 18 (U) 0-5-200 (U) FL34
10CMP-GMTT 21 (V) 0-3-GPN 25-301 34 (G) MP-2-5
11TEA 8 172CN-1 18 (U) 1-5-200 (T) F-1
12TAESL 7 (T) 12A-TE (V) 1-3-GPN (U) FL37
140T 16 (G) TC-15WA 172CN-2 18 (U) 2-5-200 25-450 34 (G) MP-6
(T) 103-01FP (V) 2-3-GPN (U) FL35
(U) 71 (U) 20-G202C 34 25-451 34 (G) MP-7
(V) J28 (V) 210F-80 20 (U) FL36
141C 18 (G) TC-141C 22 (SM) H1945-510 27-0005 34 (E) 505100
(T) 152-01FP (U) RP3 (G) MA-2
(U) CA550 210X-80 20 (SM) H1940-540 (T) TK
141TA 16 (G) TW-141TA 22 (U) ROB (U) W05
(U) WH550 210X-80-A 22 (U) RO 27-1013 34 (G) MP-4
14TEA 8 210Y-15 20 (SM) H1944-200 2TEA 8
171H-2 16 (U) TYPE 28 #2 22 (U) RMC2B 2TEP 8
(V) 2-MFA-J 210Y-15-300A 22 (U) RCA 301F-510A 24 (SF) AP5401
171H-4 16 (U) TYPE 28 #4 210Y-15-300B 22 (U) RCAB (T) R-LP
(V) 4-MFA-J 210Y-15-5 20 (SM) H1941-520 (U) RLP
171H-6 16 (U) TYPE 28 #8 210Y-15-510A 22 (U) R-15-510 301F-510B 24 (E) R511-LPG
(V) 6-MFA-J (U) RW (G) EP-70G
171W-0 16 (T) 192-02P 210Y-15-510B 22 (U) RWB (U) RLPB
(U) TYPE 17#0 210Y-15-A 22 301Y-BA 24 (E) R-15-520
(V) 0-W-J 24-0015 27 (W) 15 (E) R-511B
171W-00 16 (T) 191-02P 24-0016 27 (W) 16 (G) EA-1G
(U) TYPE 17#00 24-0051 27 (W) 51 (SF) AA1401
(V) 00-W-J 24-0061 27 (W) 61 (U) RB
171W-000 16 (T) 190-02P 24-0101 27 (W) 101 301Y-MCA 24 (E) R-15-200
(U) TYPE 17#000 24-0102 27 (W) 102 (E) R-511-MC
(V) 000-W-J 24-0111 27 (W) 111 (G) EA-2G
171W-1 16 (T) 193-02P 24-0112 27 (W) 112 (U) RMC
(U) TYPE 17#1 24-0306 27 (W) 306 3TAESL 7 (T) 3A-TE
(V) 1-W-J 24-0314 27 (W) 314 3TEA 8
171W-2 16 (T) 194-02P 24-0315 27 (W) 315 3TEP 8
(U) TYPE 17#2 24-0317 27 (W) 317 3TPESL 7 (T) 3A-TE
(V) 2-W-J 24-0318 27 (W) 318 452C-175 23 (U) RUH8213
171W-3 16 (T) 195-02P 24-0319 27 (W) 319 452C-175-F 23 (T) 245-04P
(U) TYPE 17#3 24-0321 27 (W) 321 452C-300 23
(V) 3-W-J 24-0806 27 (W) 806 452C-300-F 23 (T) 245-05P
171W-4 16 (T) 196-02P 24-0810 27 (W) 810 452IN-175 23 (U) RUH8215
(U) TYPE 17#4 24-1690 27 (W) 1690 452IN-175-F 23 (T) 245-01P
(V) 4-W-J 24-CV5PR 30 (T) 250-01P (U) RUH8215A-1
171W-5 16 (U) TYPE 17#5 (U) TCVA 452IN-300 23
(V) 5-W-J 24-CV5TF 30 (U) TCV-11 452IN-300-F 23 (T) 245-02P
171W-6 16 (U) TYPE 17#6 24-CV5TO 30 (U) TCV-10 (U) RV8015A-1
(V) 6-W-J 24-CV8PR 30 (W) WE-62 452IN-450 23 (G) EN-45B
172C-0 18 (T) 181-01P 24-CV8RF 30 (W) CV-33L (U) RHP500
(U) 0-5-101 24-CV8RO 30 (W) CV-33R 452IN-450-F 23 (G) EN-45M
(V) 0-3-101 24-CV9PR 30 (U) RCVB (T) 245-03P
172C-00 18 (T) 180-01P (W) WE-61 4TEP 8
18 (U) 00-5-101
Equivalent Code: (E) Prest-O-Lite®
; (FP) FirePower®
; (G) GOSS®
; (SF) SureFire®
; (SM) Smith Equipment®
(T) TorboTorch®
; (U) UNIWELD®
; (V) Victor®
; (W) WESTERN ENTERPRISES®
Prest-O-Lite® is a registered trademark of ESAB Welding & Cutting Products; FirePower® & TurboTorch® are registeredtrademarks of Victor Equipment Co., Corp.; , GOSS® is a registered trademark of GOSS Inc.; SureFire® is a registeredtrademark of Newell; Smith Equipment® is a registered trademark of Smith Equipment Manufacturing Co.; UNIWELD® isa registered trademark of Uniweld Products Inc.; Western Enterprises® is a registered trademark of Scott & FetzerCompany, The Corp. The above listed companies are not associated with Genstar Technologies Co., Inc.
39
www.genstartech.comCatalog Index & Comparison Chart
Ca
talo
g In
de
x &
Co
mp
aris
on
Ch
art
Model
NumberPP
EquivalentNumber
Model
NumberPP
EquivalentNumber
Model
NumberPP
EquivalentNumber
4TPESL 7 (T) 4A-TE 6Q-5SA 8 (T) S-5QD 7S-4TP 9 (E) SJ-4LPG
10 (G) BP-22LTE (U) ASQ25 (G) BP-15PM
10 (T) 44TL-TE 6Q-5TA 8 (E) QD-SJ-4A (U) TS-4
11 (G) BP-22LTE (G) 5 7S-5SA 8 (E) 10X25
11 (T) 44TL-TE (SF) AA1301 (G) BA-5
5TAESL 7 (T) 5A-TE (T) A-5 (T) S-5
5TEA 8 (U) A-5 (U) S25
5TEP 8 6Q-5TASL 7 (G) GA32 7S-5TA 8 (E) SJ-3A
5TPESL 7 (T) 5A-TE (T) PL-5A (U) AS-5
66QA7S 6 (G) BRS-665 6Q-5TP 9 (E) QD-SJ-5LPG 7S-5TP 9 (E) SJ-5LPG
(U) TUA (G) GT-5 (G) BP-17PM
66QT-FA 6 (T) PLF-A5 (T) T-5 (U) TS-5
(U) TH8 (U) T-5 7S-6SA 8 (E) 10X26
66QT-FB 6 (T) PLF-B5 6Q-5TPSL 7 (T) PL-5T (G) BA-6
(U) TH8B 6Q-6SA 8 (T) S-6QD (T) S-6
66QT-RA 6 (E) POLQD#1 (U) ASQ26 (U) S26
(G) CG-4 6Q-6TP 9 (E) QD-SJ-6LPG 7S-8TA 8 (E) SJ-4A
(SF) AA1501 (G) GT-6 (G) BA-10A
(T) G-4 (T) T-6 (U) AS-8
(U) TH6 (U) T-6 883TE-0 17 (T) 258-01P
66QT-RB 6 (G) GH-4 6Q-8TA 8 (E) QD-SJ-5A (V) 0-TE
(T) H-4 (G) 8 883TE-1 17 (T) 259-01P
(U) TH6B (T) A-8 (V) 1-TE
6Q-11TA 8 (G) 11 (U) A-8 883TE-2 17 (T) 260-01P
(T) A-11 6Q-8TASL 7 (G) 38 (V) 2-TE
(U) A-11 (T) PL-8A 883TE-3 17 (T) 261-01P
6Q-12TASL 7 (G) 8L(40) 6TEP 8 (V) 3-TE
(SF) AA1003S 77QT-FA 6 (E) 401M 883TE-4 17 (T) 262-01P
(T) PL-12A (G) AA-1 (V) 4-TE
6Q-14TA 8 (G) GA14 (U) TH9 883TE-5 17 (T) 263-01P
(T) A-14 77QT-FB 6 (G) AP-1 (V) 5-TE
6Q-1SA 8 (T) S-1QD (U) TH9B 883TE-6 17 (T) 264-01P
(U) ASQ21 77QT-RA 6 (E) 403 (V) 6-TE
6Q-2SA 8 (T) S-2QD (G) AA-3 883TEMFA-1 17 (T) 266-01P
(U) ASQ22 (T) WA-400 (V) 1-TEMFA
6Q-2TA 8 (T) A-2 (U) TH3 883TEMFA-2 17 (T) 26701P
6Q-2TP 9 (SF) AP5302 77QT-RB 6 (U) TH3B (V) 2-TEMFA
(T) T-2 77SA6Q 6 (G) BRS-770 883TEMFA-3 17 (T) 26801P
(U) T-2 (SF) AA1202 (V) 3-TEMFA
6Q-3SA 8 (T) S-3QD (T) SA 883TEMFA-4 17 (T) 269-01P
(U) ASQ23 (U) UTA (V) 4-TEMFA
6Q-3TA 8 (E) QD-SJ-3A 7S-11TA 8 (E) SJ-5A 883TEMFA-5 17 (T) 270-01P
(G) 3 (G) BA-12A (V) 5-TEMFA
(T) A-3 (U) AS-11 883TEN-0 17 (V) 0-TEN
(U) A-3 7S-1SA 8 (G) BA-1 883TEN-1 17 (V) 1-TEN
6Q-3TASL 7 (G) 3L (T) S-1 883TEN-2 17 (V) 2-TEN
(SF) AA1001S (U) S21 883TEN-3 17 (V) 3-TEN
(T) PL-3A 7S-2SA 8 (G) BA-2 883TEN-4 17 (V) 4-TEN
6Q-3TP 9 (E) QD-SJ-3LPG (T) S-2 883TEN-5 17 (V) 5-TEN
(G) GT-3 (U) S22 883TEN-6 17 (V) 6-TEN
(T) T-3 7S-2TP 9 (U) TS-2 88QH-1 10 (T) STK-1
(U) T-3 7S-3SA 8 (E) 10X23 88QH-3 10 (G) GP360R
6Q-3TPSL 7 (SF) AP5002S (G) BA-3 (T) STK-9
(T) PL-3T (T) S-3 (U) RP3T5
6Q-4SA 8 (T) S-4QD (U) S23 88QH-33 10 (G) GP-360L
(U) ASQ24 7S-3TA 8 (G) BA-9A (T) STK-99
6Q-4TP 9 (E) C274QD-SJ-4LPG (U) AS-3 88QH-R 10 (G) EP-20BR
(G) GT-4 7S-3TP 9 (E) SJ-3LPG (T) STK-R
(SF) AP5303 (G) BP-13PM (U) RP-3E
(T) T-4 (U) TS-3 8Q-1TP 10 (T) ST-1
(U) T-4 7S-4SA 8 (E) 10X24 8Q-33TP 10 (G) BP-22L
6Q-4TPSL 7 (G) GT-4L (G) BA-4 (T) ST-33
(T) PL-4T (T) S-4
(U) S24
Equivalent Code: (E) Prest-O-Lite®
; (FP) FirePower®
; (G) GOSS®
; (SF) SureFire®
; (SM) Smith Equipment®
(T) TorboTorch®
; (U) UNIWELD®
; (V) Victor®
; (W) WESTERN ENTERPRISES®
Prest-O-Lite® is a registered trademark of ESAB Welding & Cutting Products; FirePower® & TurboTorch® are registeredtrademarks of Victor Equipment Co., Corp.; , GOSS® is a registered trademark of GOSS Inc.; SureFire® is a registeredtrademark of Newell; Smith Equipment® is a registered trademark of Smith Equipment Manufacturing Co.; UNIWELD® is aregistered trademark of Uniweld Products Inc.; Western Enterprises® is a registered trademark of Scott & Fetzer Company,The Corp. The above listed companies are not associated with Genstar Technologies Co., Inc.
40
Catalog Index & Comparison Chart
Ca
talo
g In
de
x &
Co
mp
aris
on
Ch
art
Model
NumberPP
EquivalentNumber
Model
NumberPP
EquivalentNumber
Model
NumberPP
EquivalentNumber
8Q-3TP 10 (G) BP-20TER FA5TO 29 (U) TFAM100 HGP-025 33 (G) HEF-25
(T) ST-3 FA5TPR 29 (T) H-24
(U) UT5 G13-8VM 17 (U) TYPE 13 #8 VM (U) HLP13B
8Q-44TP 11 (G) Q-125 (V) DEF-J HST18-12 20
(SF) T655 G17-1 17 (T) 256-01P+266-01P HW23-012 33 (T) 252-01P
(T) TL-44 (V) UN-J+TEN-1 (U) H32B
8TAESL 7 (T) 8A-TE G17-2 17 (T) 256-01P+267-01P HW23-012A 33 (T) 252-03P
8TEA 8 (V) UN-J+TEN-2 (U) H32A
99TP 11 (G) GP-9 G17-3 17 (T) 256-01P+268-01P HW23-025 33 (U) H33B
(SF) JT681 (V) UN-J+TEN-3 HW23-025A 33 (U) H33A
(T) TP-10 G17-4 17 (T) 256-01P+269-01P HW23-050 33 (U) H34B
(U) PCV25 (V) UN-J+TEN-4 HW23-050A 33 (U) H34A
9-WG1P 34 (G) MP-35 G17-5 17 (T) 256-01P+270-01P HW23-T012 33 (U) H32BT
9-WG6G 34 (U) 9-WG52 (V) UN-J+TEN-5 HW23-T012A 33 (U) H32AT
B300 35 (T) BG G17-FT 17 (U) TYPE 17 #9 HW23-T012AB 33 (U) H32ABT
B306 35 (U) 40038 (V) EF-J HW24-025 33 (U) H43B
BT2 35 (U) 40049 G17-VMA-1 16 (T) VMA-1-15 HW24-050 33 (U) H44B
BT6S 35 (U) TYPE 17 #30 HWB-10CV 31 (FP) VF-10-RH
BX6 35 (U) 40048 G20-030RL 23 (G) HEF-10
C-1 28 (W) C-1 G20-100 23 KA11BSP 4 (G) KX-3B
C-5 28 (W) C-5 G20-300 23 (T) X-3B
CK-1SP 28 (W) CK-1 G20-400 23 (U) 89600
CK-5SP 28 (W) CK-5 G20-4000 23 KA14BSP 4 (G) KX-4B
CRT10 32 (T) 141-01 G20-600 23 (T) X-4B
(U) 513 G20-F060 23 KA30 12 (U) K24
CRT10MC 32 (E) 3321A G20-FC 23 KA30MC 12 (U) K23
(G) C-800 GF11 16 (G) BRS700 KA30MC-T 12 (U) K23C
(T) TT-MC (T) 160-01P KA30MC-TC 12 (U) K23C-T
(U) 512 (U) F11 KA50-T 13 (U) K46NP
CRT20N 35 (T) TT-20 GF22 16 KA50-TC 13 (U) K46NP-T
CRT40B 32 (E) 25Y29 GHS-14 9 (G) MP-14 KA5BSP 4 (G) KX-5B
(G) C-850 (SF) Model 820 (T) X-5B
(T) TT-B (T) HS-11 KA5MCSP 4 (T) X-5MC
(U) 502 (U) HG-4 KA8MCSP 4 (G) KX-6MC
CRT40N 35 (T) TT-40 GKNP 35 (T) X-6MC
CY10-MC 32 (G) LM-10 GKNP20-T 35 (T) NPK-20 KA8MC-TSP 4 (T) X-6MCTTMC
(T) AC-MC GKNP20-TC 35 (T) NPK-20T KA90 15 (U) KL550-5
(U) MC GKNP40-T 35 (T) NPK-40 KA90MC 15 (U) KL550-4
CY14-600 32 (G) QLP GKNP40-TC 35 (T) NPK-40T KA90MC-T 15 (U) KL550-4NP
(SF) P100 GMTR 17 (G) 2033H-15 KA90MC-TC 15 (U) KL550-4NP-T
(T) MT-1 (U) MTR KASF4BSP 4 (G) KA-37H
(U) MDC GMTT 17 (G) 2066T-0 (T) WSF-4
CY16-600 32 (G) QLM (U) MTT (U) K-37
(SF) MG9 GMTW-1 17 (G) 2033-1 KASF4MCSP 4 (G) KA-38H
(T) PT-1 (U) MTW #1 (T) WSF-3
(U) PDC GMTW-2 17 (G) 2033-2 (U) K-38
CY20-540 32 (G) LO-20 (U) MTW#2 KASL12BSP 5 (T) PL-12ADLX-B
(T) OX-20 GR15-FC 23 KASL5BSP 5 (G) KX-10B
(U) R GRAB2 22 (U) RB2 (T) PL-5ADLX-B
CY20-580 32 (T) NT-20 GRAMC2 22 (U) RMC2 KASL5MCSP 5 (G) KX-10MC
(U) N20 HBG-6 35 (T) BGH (T) PL-5ADLX-MC
CY40-540 32 (G) LO-40 HGA-012A 33 (E) 501F12 KASL8BSP 5 (G) KX-15B
(T) OX-40 (G) HA3-12 (T) PL-8ADLX-B
(U) R40 (SF) AA1601 KASL8MCSP 5 (G) KX-15MC
CY40-580 32 (T) NT-40 (T) AH-12 (T) PL-8ADLX-MC
(U) N40 (U) H-12 KAT70 14 (U) KLT71-5
CY40-B 32 (G) LB-40 HGA-025A 33 (E) 571F73 KAT70MC 14 (U) KLT71-4
(T) AC-B (G) HA3-25 KAT70MC-T 14 (U) KLT71-4NP
(U) B (T) AH-24 KAT70MC-TC 14 (U) KLT71-4NP-T
FA5RF 29 (U) RFAM101 (U) H-13 KAT90 15 (U) KLT550-5
FA5RO 29 (U) RFAM100 HGP-012 33 (G) HEF-12 KAT90MC 15 (U) KLT550-4
FA5RPR 29 (T) H-12 KAT90MC-T 15 (U) KLT550-4NP
FA5TF 29 (U) TFAM101 (U) HLP14B KAT90MC-TC 15 (U) KLT550-4NP-T
Equivalent Code: (E) Prest-O-Lite®
; (FP) FirePower®
; (G) GOSS®
; (SF) SureFire®
; (SM) Smith Equipment®
(T) TorboTorch®
; (U) UNIWELD®
; (V) Victor®
; (W) WESTERN ENTERPRISES®
Prest-O-Lite® is a registered trademark of ESAB Welding & Cutting Products; FirePower® & TurboTorch® are registeredtrademarks of Victor Equipment Co., Corp.; , GOSS® is a registered trademark of GOSS Inc.; SureFire® is a registeredtrademark of Newell; Smith Equipment® is a registered trademark of Smith Equipment Manufacturing Co.; UNIWELD® is aregistered trademark of Uniweld Products Inc.; Western Enterprises® is a registered trademark of Scott & Fetzer Company,The Corp. The above listed companies are not associated with Genstar Technologies Co., Inc.
41
www.genstartech.comCatalog Index & Comparison Chart
Ca
talo
g In
de
x &
Co
mp
aris
on
Ch
art
Model
NumberPP
EquivalentNumber
Model
NumberPP
EquivalentNumber
Model
NumberPP
EquivalentNumber
KCMA04SP 20
KCMA16-BSP 20
KCMA16SP 20
KCMA16TCSP 19
KCMA26SP 20
KCMP16SP 20
KM50-T 13 (U) K45CM
KP4SP 4 (G) KLP-4
(T) LP-3
KP50-T 13 (U) K45CP
KP5SP 4 (G) KLP-2
(T) LP-2
KP6SP 4 (T) LP-1
KPSL3SP 5 (T) PL-3TDLX
KPSL4SP 5 (T) PL-4TDLX
KPSL5SP 5 (T) PL-5TDLX
R230-03 23
RNP15-3SF 25 (W) 15-3SF
26 (W) 15-3SF
RNP16-8SF 25 (W) 16-8SF
RNP300-3SF 25 (W) 300-3SF
RNP305-3A 25 (W) 305-3SF
RNP66-SF 26 (W) 66-SF
RNPCO3-SF 25 (W) CO-3SF
RNPCO6N 25 (W) CO-6N
RNT15-2 25 (W) 15-2
RNT16-2 25 (W) 16-2
RNT300-2 25 (W) 300-2
RNT305-2 25 (W) 305-2
RNT62 26 (W) 62
RNT92 26 (W) 92
RNTCO2 25 (W) CO2
ROB134 26 (W) 134
ROB135 26 (W) 135
ROB316 26
ROB32 26 (W) 32
ROB33 26 (W) 33
ROB34 26
ROB48F 26
T10-82B 21
T10-83B 21
T110-26 21
T110-27 21
WB-500T 31 (FP) RHT-500
WB-500T 31 (G) AP-25
WBK-500 31 (FP) HT-500FP
WBK-500 31 (G) KP-201
WBK-500 31 (U) WB500
Equivalent Code: (E) Prest-O-Lite®
; (FP) FirePower®
; (G) GOSS®
; (SF) SureFire®
; (SM) Smith Equipment®
(T) TorboTorch®
; (U) UNIWELD®
; (V) Victor®
; (W) WESTERN ENTERPRISES®
Prest-O-Lite® is a registered trademark of ESAB Welding & Cutting Products; FirePower® & TurboTorch® are registeredtrademarks of Victor Equipment Co., Corp.; , GOSS® is a registered trademark of GOSS Inc.; SureFire® is a registeredtrademark of Newell; Smith Equipment® is a registered trademark of Smith Equipment Manufacturing Co.; UNIWELD® is aregistered trademark of Uniweld Products Inc.; Western Enterprises® is a registered trademark of Scott & Fetzer Company,The Corp. The above listed companies are not associated with Genstar Technologies Co., Inc.
42
Manufacturer Cross Reference
Ma
nu
fac
ture
r Cro
ss
Re
fere
nc
e
Model Number PP Gentec
NumberModel
Number PP Gentec Number
Model Number PP Gentec
Number(G) BP-17PM 9 7S-5TP(G) BP-20TER 10 8Q-3TP
(E) 10X23 8 7S-3SA (G) BP-22L 10 8Q-33TP (SF) AA1001S 7 6Q-3TASL(E) 10X24 8 7S-4SA (G) BP-22LTE 10 4TPESL (SF) AA1003S 7 6Q-12TASL(E) 10X25 8 7S-5SA (G) BP-22LTE 11 4TPESL (SF) AA1202 6 77SA6Q(E) 10X26 8 7S-6SA (G) BRS-665 6 66QA7S (SF) AA1301 8 6Q-5TA (E) 25Y29 32 CRT40B (G) BRS700 16 GF11 (SF) AA1401 24 301Y-BA(E) 3321A 32 CRT10MC (G) BRS-770 6 77SA6Q (SF) AA1501 6 66QT-RA(E) 401M 6 77QT-FA (G) C-800 32 CRT10MC (SF) AA1601 33 HGA-012A(E) 403 6 77QT-RA (G) C-850 32 CRT40B (SF) AP5002S 7 6Q-3TPSL(E) 501F12 33 HGA-012A (G) CG-4 6 66QT-RA (SF) AP5302 9 6Q-2TP(E) 505100 34 27-0005 (G) EA-1G 24 301Y-BA (SF) AP5303 9 6Q-4TP (E) 571F73 33 HGA-025A (G) EA-2G 24 301Y-MCA (SF) AP5401 24 301F-510A(E) 751F00 33 25-120 (G) EN-45B 23 452IN-450 (SF) JT681 11 99TP(E) 790F34 34 25-300 (G) EN-45M 23 452IN-450-F (SF) MG9 32 CY16-600(E) C274QD-SJ-4LPG 9 6Q-4TP (G) EP-20BR 10 88QH-R (SF) Model 820 9 GHS-14(E) POLQD#1 6 66QT-RA (G) EP-70G 24 301F-510B (SF) P100 32 CY14-600(E) QD-SJ-3A 8 6Q-3TA (G) GA14 8 6Q-14TA (SF) T655 11 8Q-44TP(E) QD-SJ-3LPG 9 6Q-3TP (G) GA32 7 6Q-5TASL (SF) TX405 34 25-300(E) QD-SJ-4A 8 6Q-5TA (G) GH-4 6 66QT-RB(E) QD-SJ-5A 8 6Q-8TA (G) GP-360L 10 88QH-33(E) QD-SJ-5LPG 9 6Q-5TP (G) GP360R 10 88QH-3(E) QD-SJ-6LPG 9 6Q-6TP (G) GP-9 11 99TP (SM) H1940-540 20 210X-80(E) R-15-200 24 301Y-MCA (G) GT-3 9 6Q-3TP (SM) H1941-520 20 210Y-15-5(E) R-15-520 24 301Y-BA (G) GT-4 9 6Q-4TP (SM) H1944-200 20 210Y-15(E) R-511B 24 301Y-BA (G) GT-4L 7 6Q-4TPSL (SM) H1945-510 22 210F-80(E) R511-LPG 24 301F-510B (G) GT-5 9 6Q-5TP(E) R-511-MC 24 301Y-MCA (G) GT-6 9 6Q-6TP(E) SJ-3A 8 7S-5TA (G) HA3-12 33 HGA-012A(E) SJ-3LPG 9 7S-3TP (G) HA3-25 33 HGA-025A (T) 103-01FP 16 140T(E) SJ-4A 8 7S-8TA (G) HEF-10 31 HWB-10CV (T) 12A-TE 7 12TAESL(E) SJ-4LPG 9 7S-4TP (G) HEF-12 33 HGP-012 (T) 141-01 32 CRT10(E) SJ-5A 8 7S-11TA (G) HEF-25 33 HGP-025 (T) 152-01FP 18 141C(E) SJ-5LPG 9 7S-5TP (G) KA-37H 4 KASF4BSP (T) 160-01P 16 GF11
(G) KA-38H 4 KASF4MCSP (T) 172-01P 18 172CM-0(G) KLP-2 4 KP5SP (T) 180-01P 18 172C-00
(FP) HT-500FP 31 WBK-500 (G) KLP-4 4 KP4SP (T) 181-01P 18 172C-0(FP) RHT-500 31 WB-500T (G) KP-201 31 WBK-500 (T) 182-01P 18 172C-1(FP) VF-10-RH 31 HWB-10CV (G) KX-10B 5 KASL5BSP (T) 183-01P 18 172C-2
(G) KX-10MC 5 KASL5MCSP (T) 190-02P 16 171W-000(G) KX-15B 5 KASL8BSP (T) 191-02P 16 171W-00
(G) 11 8 6Q-11TA (G) KX-15MC 5 KASL8MCSP (T) 192-02P 16 171W-0(G) 2033-1 17 GMTW-1 (G) KX-3B 4 KA11BSP (T) 193-02P 16 171W-1(G) 2033-2 17 GMTW-2 (G) KX-4B 4 KA14BSP (T) 194-02P 16 171W-2(G) 2033H-15 17 GMTR (G) KX-5B 4 KA5BSP (T) 195-02P 16 171W-3(G) 2066T-0 17 GMTT (G) KX-6MC 4 KA8MCSP (T) 196-02P 16 171W-4(G) 3 8 6Q-3TA (G) LB-40 32 CY40-B (T) 245-01P 23 452IN-175-F(G) 38 7 6Q-8TASL (G) LM-10 32 CY10-MC (T) 245-02P 23 452IN-300-F(G) 3L 7 6Q-3TASL (G) LO-20 32 CY20-540 (T) 245-03P 23 452IN-450-F(G) 5 8 6Q-5TA (G) LO-40 32 CY40-540 (T) 245-04P 23 452C-175-F(G) 8 8 6Q-8TA (G) MA-2 34 27-0005 (T) 245-05P 23 452C-300-F(G) 8L(40) 7 6Q-12TASL (G) MP-1 34 25-300 (T) 250-01P 30 24-CV5PR(G) AA-1 6 77QT-FA (G) MP-14 9 GHS-14 (T) 252-01P 33 HW23-012(G) AA-3 6 77QT-RA (G) MP-2-5 34 25-301 (T) 252-03P 33 HW23-012A(G) AP-1 6 77QT-FB (G) MP-35 34 9-WG1P (T) 256-01P+266-01P 17 G17-1(G) AP-25 31 WB-500T (G) MP-37A 33 25-120 (T) 256-01P+267-01P 17 G17-2(G) BA-1 8 7S-1SA (G) MP-4 34 27-1013 (T) 256-01P+268-01P 17 G17-3(G) BA-10A 8 7S-8TA (G) MP-6 34 25-450 (T) 256-01P+269-01P 17 G17-4(G) BA-12A 8 7S-11TA (G) MP-7 34 25-451 (T) 256-01P+270-01P 17 G17-5(G) BA-2 8 7S-2SA (G) Q-125 11 8Q-44TP (T) 258-01P 17 883TE-0(G) BA-3 8 7S-3SA (G) QLM 32 CY16-600 (T) 259-01P 17 883TE-1(G) BA-4 8 7S-4SA (G) QLP 32 CY14-600 (T) 260-01P 17 883TE-2(G) BA-5 8 7S-5SA (G) TC-141C 18 141C (T) 261-01P 17 883TE-3(G) BA-6 8 7S-6SA (G) TC-15WA 16 140T (T) 262-01P 17 883TE-4(G) BA-9A 8 7S-3TA (G) TW-141TA 16 141TA (T) 263-01P 17 883TE-5(G) BP-13PM 9 7S-3TP (T) 264-01P 17 883TE-6(G) BP-15PM 9 7S-4TP (T) 266-01P 17 883TEMFA-1
SureFire® to GENTEC®
SMITH EQUIPMENT® to GENTEC®
Prest-O-Lite® to GENTEC®
FirePower® to GENTEC®
GOSS® to GENTEC®
TurboTorch® to GENTEC®
Prest-O-Lite® is a registered trademark of ESAB Welding & Cutting Products; FirePower® & TurboTorch® are registeredtrademarks of Victor Equipment Co., Corp.; , GOSS® is a registered trademark of GOSS Inc.; SureFire® is a registeredtrademark of Newell; Smith Equipment® is a registered trademark of Smith Equipment Manufacturing Co.The above listed companies are not associated with Genstar Technologies Co., Inc.
43
www.genstartech.comManufacturer Cross Reference
Ma
nu
fac
ture
r Cro
ss
Re
fere
nc
e
Model Number PP Gentec
NumberModel
Number PP Gentec Number
Model Number PP Gentec
Number(T) S-1 8 7S-1SA (U) 47503 36 MB2-F-R410A-6(T) S-1QD 8 6Q-1SA (U) 502 32 CRT40B
(T) 26701P 17 883TEMFA-2 (T) S-2 8 7S-2SA (U) 512 32 CRT10MC (T) 26801P 17 883TEMFA-3 (T) S-2QD 8 6Q-2SA (U) 513 32 CRT10(T) 269-01P 17 883TEMFA-4 (T) S-3 8 7S-3SA (U) 71 (U) 16 140T(T) 270-01P 17 883TEMFA-5 (T) S-3QD 8 6Q-3SA (U) 89600 4 KA11BSP(T) 3A-TE 7 3TAESL (T) S-4 8 7S-4SA (U) 9-WG52 34 9-WG6G(T) 3A-TE 7 3TPESL (T) S-4QD 8 6Q-4SA (U) A-11 8 6Q-11TA (T) 44TL-TE 10 4TPESL (T) S-5 8 7S-5SA (U) A-3 8 6Q-3TA(T) 44TL-TE 11 4TPESL (T) S-5QD 8 6Q-5SA (U) A-5 8 6Q-5TA (T) 4A-TE 7 4TPESL (T) S-6 8 7S-6SA (U) A-8 8 6Q-8TA(T) 5A-TE 7 5TAESL (T) S-6QD 8 6Q-6SA (U) AS-11 8 7S-11TA(T) 5A-TE 7 5TPESL (T) SA 6 77SA6Q (U) AS-3 8 7S-3TA(T) 8A-TE 7 8TAESL (T) ST-1 10 8Q-1TP (U) AS-5 8 7S-5TA(T) A-11 8 6Q-11TA (T) ST-3 10 8Q-3TP (U) AS-8 8 7S-8TA(T) A-14 8 6Q-14TA (T) ST-33 10 8Q-33TP (U) ASQ21 8 6Q-1SA(T) A-2 8 6Q-2TA (T) STK-1 10 88QH-1 (U) ASQ22 8 6Q-2SA(T) A-3 8 6Q-3TA (T) STK-9 10 88QH-3 (U) ASQ23 8 6Q-3SA(T) A-5 8 6Q-5TA (T) STK-99 10 88QH-33 (U) ASQ24 8 6Q-4SA(T) A-8 8 6Q-8TA (T) STK-R 10 88QH-R (U) ASQ25 8 6Q-5SA(T) AC-B 32 CY40-B (T) T-2 9 6Q-2TP (U) ASQ26 8 6Q-6SA(T) AC-MC 32 CY10-MC (T) T-3 9 6Q-3TP (U) B 32 CY40-B(T) AH-12 33 HGA-012A (T) T-4 9 6Q-4TP (U) CA550 18 141C(T) AH-24 33 HGA-025A (T) T-5 9 6Q-5TP (U) F11 16 GF11(T) AR-510 24 101Y-510 (T) T-6 9 6Q-6TP (U) FL34 34 25-300(T) AR-B 24 101Y-BA (T) TK 34 27-0005 (U) FL35 34 25-450(T) AR-MC 24 101Y-MCA (T) TL-44 11 8Q-44TP (U) FL36 34 25-451(T) BG 35 B300 (T) TP-10 11 99TP (U) FL37 34 25-301(T) BGH 35 HBG-6 (T) TT-20 35 CRT20N (U) G10D 37 GMC25-R134A(T) F-1 34 25-301 (T) TT-40 35 CRT40N (U) G529D 37 GMP-R410A(T) G-4 6 66QT-RA (T) TT-B 32 CRT40B (U) G530D 37 GMC25-R410A(T) H-12 33 HGP-012 (T) TT-MC 32 CRT10MC (U) G9D 37 GMP25-R134A(T) H-24 33 HGP-025 (T) VMA-1-15 16 G17-VMA-1 (U) H-12 33 HGA-012A(T) H-4 6 66QT-RB (T) WA-400 6 77QT-RA (U) H-13 33 HGA-025A(T) HS-11 9 GHS-14 (T) WSF-3 4 KASF4MCSP (U) H32A 33 HW23-012A(T) L-1 34 25-300 (T) WSF-4 4 KASF4BSP (U) H32ABT 33 HW23-T012AB(T) LP-1 4 KP6SP (T) X-3B 4 KA11BSP (U) H32AT 33 HW23-T012A(T) LP-2 4 KP5SP (T) X-4B 4 KA14BSP (U) H32B 33 HW23-012(T) LP-3 4 KP4SP (T) X-5B 4 KA5BSP (U) H32BT 33 HW23-T012(T) MT-1 32 CY14-600 (T) X-5MC 4 KA5MCSP (U) H33A 33 HW23-025A(T) NPK-20 35 GKNP20-T (T) X-6MC 4 KA8MCSP (U) H33B 33 HW23-025(T) NPK-20T 35 GKNP20-TC (T) X-6MCTTMC 4 KA8MC-TSP (U) H34A 33 HW23-050A(T) NPK-40 35 GKNP40-T (U) H34B 33 HW23-050(T) NPK-40T 35 GKNP40-TC (U) H3MB 37 HMB-24-003(T) NT-20 32 CY20-580 (U) H3MR 37 HMR-24-003(T) NT-40 32 CY40-580 (U) 00-5-101 18 172C-00 (U) H3MY 37 HMY-24-003(T) OX-20 32 CY20-540 (U) 0-5-101 18 172C-0 (U) H43B 33 HW24-025(T) OX-40 32 CY40-540 (U) 0-5-200 18 172CN-0 (U) H44B 33 HW24-050(T) PL-12A 7 6Q-12TASL (U) 0-5-200M 18 172CM-0 (U) H5MB 37 HMB-24-005(T) PL-12ADLX-B 5 KASL12BSP (U) 1-5-101 18 172C-1 (U) H5MR 37 HMR-24-005(T) PL-3A 7 6Q-3TASL (U) 1-5-200 18 172CN-1 (U) H5MY 37 HMY-24-005(T) PL-3T 7 6Q-3TPSL (U) 1-5-200M 18 172CM-1 (U) H6MB 37 HMB-24-006(T) PL-3TDLX 5 KPSL3SP (U) 2-5-101 18 172C-2 (U) H6MR 37 HMR-24-006(T) PL-4T 7 6Q-4TPSL (U) 2-5-200 18 172CN-2 (U) H6MR 37 HMR-24-008(T) PL-4TDLX 5 KPSL4SP (U) 2-5-200M 18 172CM-2 (U) H6MY 37 HMY-24-006(T) PL-5A 7 6Q-5TASL (U) 40038 35 B306 (U) H8MB 37 HMB-24-008(T) PL-5ADLX-B 5 KASL5BSP (U) 40048 35 BX6 (U) H8MY 37 HMY-24-008(T) PL-5ADLX-MC 5 KASL5MCSP (U) 40049 35 BT2 (U) HC3M 37 HMS-24-003(T) PL-5T 7 6Q-5TPSL (U) 46050 36 MA2-F-R134A (U) HC5M 37 HMS-24-005(T) PL-5TDLX 5 KPSL5SP (U) 46051 36 MA2-F-R134A-3 (U) HC6M 37 HMS-24-006(T) PL-8A 7 6Q-8TASL (U) 46052 36 MA2-F-R134A-5 (U) HC8M 37 HMS-24-008(T) PL-8ADLX-B 5 KASL8BSP (U) 46053 36 MA2-F-R134A-6 (U) HG-4 9 GHS-14(T) PL-8ADLX-MC 5 KASL8MCSP (U) 46950 36 MA4-F-R134A (U) HLP13B 33 HGP-025(T) PLF-A5 6 66QT-FA (U) 46951 36 MA4-F-R134A-5 (U) HLP14B 33 HGP-012(T) PLF-B5 6 66QT-FB (U) 47500 36 MB2-F-R410A (U) K23 12 KA30MC(T) PT-1 32 CY16-600 (U) 47501 36 MB2-F-R410A-3 (U) K23C 12 KA30MC-T(T) R-LP 24 301F-510A (U) 47502 36 MB2-F-R410A-5 (U) K23C-T 12 KA30MC-TC
UNIWELD® to GENTEC®
TurboTorch® to GENTEC® (Cont.)
TurboTorch® is registered trademark of Victor Equipment Co., Corp.; UNIWELD® is a registered trademark of UniweldProducts Inc. These companies are not associated with Genstar Technologies Co., Inc.
44
Manufacturer Cross Reference
Ma
nu
fac
ture
r Cro
ss
Re
fere
nc
e
Model Number PP Gentec
NumberModel
Number PP Gentec Number
Model Number PP Gentec
Number(U) T-3 9 6Q-3TP (V) 2-MFA-J 16 171H-2(U) T-4 9 6Q-4TP (V) 2-TE 17 883TE-2
(U) K24 12 KA30 (U) T-5 9 6Q-5TP (V) 2-TEMFA 17 883TEMFA-2(U) K-37 4 KASF4BSP (U) T-6 9 6Q-6TP (V) 2-TEN 17 883TEN-2(U) K-38 4 KASF4MCSP (U) TCLD 33 25-130 (V) 2-W-J 16 171W-2(U) K45CM 13 KM50-T (U) TCMD 33 25-121 (V) 3-TE 17 883TE-3(U) K45CP 13 KP50-T (U) TCSD 33 25-120 (V) 3-TEMFA 17 883TEMFA-3(U) K46NP 13 KA50-T (U) TCV-10 30 24-CV5TO (V) 3-TEN 17 883TEN-3(U) K46NP-T 13 KA50-TC (U) TCV-11 30 24-CV5TF (V) 3-W-J 16 171W-3(U) KL550-4 15 KA90MC (U) TCVA 30 24-CV5PR (V) 4-MFA-J 16 171H-4(U) KL550-4NP 15 KA90MC-T (U) TFAM100 29 FA5TO (V) 4-TE 17 883TE-4(U) KL550-4NP-T 15 KA90MC-TC (U) TFAM101 29 FA5TF (V) 4-TEMFA 17 883TEMFA-4(U) KL550-5 15 KA90 (U) TH3 6 77QT-RA (V) 4-TEN 17 883TEN-4(U) KLT550-4 15 KAT90MC (U) TH3B 6 77QT-RB (V) 4-W-J 16 171W-4(U) KLT550-4NP 15 KAT90MC-T (U) TH6 6 66QT-RA (V) 5-TE 17 883TE-5(U) KLT550-4NP-T 15 KAT90MC-TC (U) TH6B 6 66QT-RB (V) 5-TEMFA 17 883TEMFA-5(U) KLT550-5 15 KAT90 (U) TH8 6 66QT-FA (V) 5-TEN 17 883TEN-5(U) KLT71-4 14 KAT70MC (U) TH8B 6 66QT-FB (V) 5-W-J 16 171W-5(U) KLT71-4NP 14 KAT70MC-T (U) TH9 6 77QT-FA (V) 6-MFA-J 16 171H-6(U) KLT71-4NP-T 14 KAT70MC-TC (U) TH9B 6 77QT-FB (V) 6-TE 17 883TE-6(U) KLT71-5 14 KAT70 (U) TS-2 9 7S-2TP (V) 6-TEN 17 883TEN-6(U) MC 32 CY10-MC (U) TS-3 9 7S-3TP (V) 6-W-J 16 171W-6(U) MDC 32 CY14-600 (U) TS-4 9 7S-4TP (V) DEF-J 17 G13-8VM(U) MTR 17 GMTR (U) TS-5 9 7S-5TP (V) EF-J 17 G17-FT(U) MTT 17 GMTT (U) TUA 6 66QA7S (V) J28 (V) 16 140T(U) MTW #1 17 GMTW-1 (U) TYPE 13 #8 VM 17 G13-8VM (V) UN-J+TEN-1 17 G17-1(U) MTW#2 17 GMTW-2 (U) TYPE 17 #30 16 G17-VMA-1 (V) UN-J+TEN-2 17 G17-2(U) N20 32 CY20-580 (U) TYPE 17 #9 17 G17-FT (V) UN-J+TEN-3 17 G17-3(U) N40 32 CY40-580 (U) TYPE 17#0 16 171W-0 (V) UN-J+TEN-4 17 G17-4(U) PCV25 11 99TP (U) TYPE 17#00 16 171W-00 (V) UN-J+TEN-5 17 G17-5(U) PDC 32 CY16-600 (U) TYPE 17#000 16 171W-000(U) R 32 CY20-540 (U) TYPE 17#1 16 171W-1(U) R-15-510 22 210Y-15-510A (U) TYPE 17#2 16 171W-2(U) R40 32 CY40-540 (U) TYPE 17#3 16 171W-3(U) RB 24 301Y-BA (U) TYPE 17#4 16 171W-4(U) RB2 22 GRAB2 (U) TYPE 17#5 16 171W-5(U) RCA 22 210Y-15-300A (U) TYPE 17#6 16 171W-6(U) RCAB 22 210Y-15-300B (U) TYPE 28 #2 16 171H-2(U) RCV-100 30 24-CV9RO (U) TYPE 28 #4 16 171H-4(U) RCV-101 30 24-CV9RF (U) TYPE 28 #8 16 171H-6(U) RCVB 30 24-CV9PR (U) UT5 10 8Q-3TP(U) RFAM100 29 FA5RO (U) UTA 6 77SA6Q(U) RFAM101 29 FA5RF (U) W05 34 27-0005(U) RHP500 23 452IN-450 (U) WB500 31 WBK-500(U) RLP 24 301F-510A (U) WH550 16 141TA(U) RLPB 24 301F-510B(U) RMC 24 301Y-MCA(U) RMC2 22 GRAMC2(U) RMC2B 22 210Y-15 (V) 000-W-J 16 171W-000(U) RO 22 210X-80-A (V) 00-3-101 18 172C-00(U) ROB 22 210X-80 (V) 00-W-J 16 171W-00(U) RP3 22 210F-80 (V) 0-3-101 18 172C-0(U) RP-3E 10 88QH-R (V) 0-3-GPN 18 172CN-0(U) RP3T5 10 88QH-3 (V) 0-GPM 18 172CM-0(U) RUH8213 23 452C-175 (V) 0-TE 17 883TE-0(U) RUH8215 23 452IN-175 (V) 0-TEN 17 883TEN-0(U) RUH8215A-1 23 452IN-175-F (V) 0-W-J 16 171W-0(U) RV8015A-1 23 452IN-300-F (V) 1-3-101 18 172C-1(U) RW 22 210Y-15-510A (V) 1-3-GPN 18 172CN-1(U) RWB 22 210Y-15-510B (V) 1-GPM 18 172CM-1(U) S21 8 7S-1SA (V) 1-TE 17 883TE-1(U) S22 8 7S-2SA (V) 1-TEMFA 17 883TEMFA-1(U) S23 8 7S-3SA (V) 1-TEN 17 883TEN-1(U) S24 8 7S-4SA (V) 1-W-J 16 171W-1(U) S25 8 7S-5SA (V) 2-3-101 18 172C-2(U) S26 8 7S-6SA (V) 2-3-GPN 18 172CN-2(U) T-2 9 6Q-2TP (V) 2-GPM 18 172CM-2
VICTOR® to GENTEC®
UNIWELD® to GENTEC® (Cont.)
Victor® is registered trademark of Victor Equipment Co., Corp.; UNIWELD® is a registered trademark of Uniweld ProductsInc. These companies are not associated with Genstar Technologies Co., Inc.
45
www.genstartech.comWarranty
Wa
rran
ty
“THE BEST WARRANTY IN THE BUSINESS” TWO YEAR “OVER THE COUNTER REPLACEMENT” WARRANTY
All GENTEC, manufactured welding apparatus and equipment are warranted to be free from defectivematerial and workmanship for a period of two years from the date of purchase. Any GENTEC apparatusfound to be defective either in material or workmanship during that time will be replaced by your distrib-utor, provided that said apparatus was used under normal conditions for the purpose intended. Simplyreturn the defective item to your distributor and he’ll replace it, free of charge. It’s that easy! Damage dueto abnormal wear and tear or abuse is not covered by this warranty and must be repaired at the soleexpense of the equipment owner. GENTEC apparatus should be serviced or repaired by qualified personsor repair stations only. There are no other warranties, expressed or implied, except as stated herein. Thiswarranty gives you specific legal rights, and you may also have other rights which vary from state to state.GENTEC reserves the right to discontinue any product or change product materials, design or specifica-tions without notice.
WARNING:GENTEC Products should only be used by well-trained professional technicians for HVAC, Plumbing andRefrigeration service. Misuse of these products could cause serious injuries or death due to the high-pressure and hazardous gases.