HYDERABAD - NSIC · Industrial Automation in NSIC-TSC during the period from 26/07/2016 to...

NSIC-TECHNICAL SERVICES CENTRE

HYDERABAD

Success Stories

Electrical

Department

I am K.Kumar and s/o K.Bala Krishna. I successfully completed Master Certificate

Course in Industrial Automation in NTSC During 19/09/2016 to 17/12/2016. Faculties

taught the subject practically and explained each and everything in detail. And lab

equipments are good. Quality of course is good. I got So much of practical Knowledge. I

got Placed in DAVEK Technologies, Kushaiguda and I am Getting Rs.10,000/- per

month.

I am A.Sai Kumar and s/o A.Sathyanarayana. I successfully completed Master

Certificate Course in Industrial Automation in NTSC During 27/09/2016 to 25/12/2016.

. Faculties taught the subject practically and explained each and everything in detail.

And lab equipments are good. Quality of course is good. I got So much of practical

Knowledge. I got Placed in DAVEK Technologies, Kushaiguda and I am Getting

Rs.10,000/- per month.

I am A.Janaki Raman and s/o R.Ayyappan. I successfully completed Master Certificate

Course in Industrial Automation in NTSC During 22/06/2016 to 19/09/2016. . Faculties

taught the subject practically and explained each and everything in detail. And lab

equipments are good. Quality of course is good. I got So much of practical Knowledge. I

got Placed in DAVEK Technologies, Kushaiguda and I am Getting Rs.10,000/- per

month.

I am P.Rakesh and s/o P.Kishan. I successfully completed Master Certificate Course in

Industrial Automation in NTSC During 27/09/2016 to 25/12/2016. Faculties taught the

subject practically and explained each and everything in detail .And lab equipments are

good. Quality of course is good. I got So much of practical Knowledge. I got Placed in

Suguna Foods Private Limited, Hyderabad and I am Getting Rs.10,000/- per month.

I am M.V. Ramesh . I successfully completed Master Certificate Course in Industrial

Automation in NTSC During Year 2013. I worked as a Guest Faculty in NTSC. Quality

of course is good. I got So much of practical Knowledge and Work experience in

Technical. I got placed in RenewSys India Private Limited, Hyderabad, as technical

engineer and I am earning Rs.25,000/- per month.

I am Anil Kumar.D. I did the Master Certificate Course in Industrial Automation in

NSIC-TSC during the period from 10/08/2016 to 07/11/2016. After successful

completion of the training, I was placed in ABB India Limited . The training at NTSC

gave me the required skills & confidence to perform well in my job. My Salary Package

is Rs.1,44,000/- per annum.

I am Tanuja Masabattula D/O Maheshwarachari. I did the Master Certificate Course in

Industrial Automation in NSIC-TSC during the period from 26/07/2016 to 23/10/2016.

After successful completion of the training, I was placed in Optical and Engineering

Private Limited, Hyderabad. The training at NTSC gave me the required skills &

confidence to perform well in my job. My Salary Package is Rs.1,26,000/- per annum.

I am Syed Ruman Quadri S/O Syed Mahemood. I did the Master Certificate Course in

Industrial Automation in NSIC-TSC during the period from 25/04/2016 to 22/07/2016.

After successful completion of the training, I was placed in EPROSYS

CONSULTANTS INDIA Private Limited , Hyderabad. The training at NTSC gave

me the required skills & confidence to perform well in my job. My Salary Package is


I am P.Vali Basha and s/o P.Khaja Hussain. I successfully completed Master Certificate

Course in Electrical Design in NTSC During 04/07/2016 to 01/10/2016. Faculties taught

the subject practically and explained each and everything in detail. And lab equipments

are good. Quality of course is good. I got So much of practical Knowledge. I got Placed

in Sun Grade Solar Systems and I am Getting Rs. 8,000/- per month.

I am M.Lalithya and D/O M.V.Ravi Kumar. I successfully completed Solar

Photovoltaic System Course in NTSC During 12/02/2016 to 10/03/2016. Faculties

taught the subject practically and explained each and everything in detail .And lab

equipments are good. Quality of course is good. I got So much of practical Knowledge.

I got Placed in Solar based Company and I am Getting Rs.8,000/- per month

I am Miss.Prathyusha, I successfully completed Electrical Designing E-CAD Course

in NTSC During the year 2016. Faculties taught the subject practically and explained

each and everything in detail. And lab equipments are good. Quality of course is good.

I got So much of practical Knowledge. I got Placed in WATER LIFE INDIA and I

am Getting Rs. 8,000/- per month

I am D.Veera Venkata Krishna. I successfully completed Electrical Design E-CAD in

NTSC Hyderabad, During December, 2015, After completion of course I placed in

National Small Industries Corporation Ltd., Technical Service center, Hyderabad.

As a guest faculty for the diploma students, now I drawing Rs.14,000/- per month,

facilities in NTSC good and satisfactory

I am K.Hemanth Kumar. I successfully completed Master Certificate Course in Industrial

Automation in NTSC During the year 2015. Faculties are well and they explained with

detail. And lab equipments are good. Quality of course is good. I got So much of practical

Knowledge. I got Placed in SELEC CONTROLS PRIVATE LIMITED, and I am

Getting Rs.10,000/- per month.

I am M.Srirama Chandra Murthy. I successfully completed Master Certificate Course in

Industrial Automation in NTSC During the year 2015. Faculties are well and they

explained with detail. And lab equipments are good. Quality of course is good. I got So

much of practical Knowledge. I got Placed in KSG PROJECTS, and I am Getting


I am D.Madhavi D/O D.Srinivasulu. I successfully completed Solar Photovoltaic System

Course in NTSC During the year 2015. Faculties taught the subject practically and

explained each and everything in detail. And lab equipments are good. Quality of course

is good. I got So much of practical Knowledge. I got Placed in Solar Based Company

and I am earning Rs10,000/- per month

I am C.H.Bala Priyakshitha. I successfully completed Master Certificate Course in

Industrial Automation in NTSC During the year 2016. Faculties taught the subject

practically and explained each and everything in detail. And lab equipments are good.

Quality of course is good. I got So much of practical Knowledge. I got Placed in Solar

Based Company and I am earning Rs10,000/- per month

I am Mr.Hari Krishna .P. I successfully completed Master Certificate Course in

Industrial Automation in NTSC During the year 2016. Faculties taught the subject

practically and explained each and everything in detail. And lab equipments are good.

Quality of course is good. I got So much of practical Knowledge. I became a self

entrepreneur , my company name is MALOLAN MARKETING, at HYDERABAD

and I am earning Rs.4 lakhs per anum

I am G.Naga Sravani. I successfully completed Solar Photovoltaic System in NTSC

During the year 2015. Faculties taught the subject practically and explained each and

everything in detail. And lab equipments are good. Quality of course is good. I got So

much of practical Knowledge. I am doing my Higher Studies.

I am S.Nithya. I successfully completed Solar Photovoltaic System in NTSC During the

year 2016. Faculties taught the subject practically and explained each and everything in

detail. And lab equipments are good. Quality of course is good. I got So much of

practical Knowledge. I am doing my Higher Studies

I am Mr.Sai Srinivas. I successfully completed Solar Photovoltaic System in NTSC

During the year 2015. Faculties taught the subject practically and explained each and

everything in detail. And lab equipments are good. Quality of course is good. I got So

much of practical Knowledge. I am doing my Higher Studies

I am M.Indu Pratima D/O M.Srinivas Rao. I did the Master Certificate Course in

Electrical Design in NSIC-TSC during the period from 06/12/2015 to 14/03/2016.

Faculties taught the subject practically and explained each and everything in detail.

And lab equipments are good. Quality of course is good. I got So much of practical

Knowledge. I am doing my Higher Studies

Software-ii

Department

I am Jaina Vinay Kumar. I did the MBA Project in NTSC, Hyderabad for 45 Days. After

successful completion of the training, I was placed in SERENE.PU.FOAM as Store

Incharge. The training at NTSC gave me the required skills & confidence to perform well

in my job. My salary package is Rs. 1,92,000/- per Annum.

I am S.S. Srinivasa Prasad, S/o: S. SatyaNarayana. I did the Multimedia-I in NTSC,

Hyderabad from 14/03/2016 to 14/04/2016. After successful completion of the

training, I was placed in First American Pvt. Ltd as Senior Executive, Banjara Hills,

Hyderabad. The training at NTSC gave me the required skills & confidence to perform

well in my job. My salary package is Rs. 2,16,000/- per Annum.

I am G. Hindu, D/o: N. Nageshwara Rao. I did the Tally and M.S Office & Internet in

NTSC, Hyderabad from 18/04/2016 to 18/05/2016. After successful completion of the

training, I was placed in S.S. Engineering Works as Managing Director, Kushaiguda,

ECIL, Hyderabad. The training at NTSC gave me the required skills & confidence to

perform well in my job. My salary package is Rs. 1,80,000/- per Annum.

I am Archana Gupta. I did the Tally in NTSC, Hyderabad for 1 Month. After successful

completion of the training, I was placed in HMWSXSB as office documentation applicant,

Sainikpuri, Hyderabad. The training at NTSC gave me the required skills & confidence to


I am Dolly Bagri. I did the Mini Project in NTSC, Hyderabad for 1 Month. After

successful completion of the training, I was placed in Husys. The training at NTSC

gave me the required skills & confidence to perform well in my job. My salary

package is Rs. 1,56,000/- per Annum.

I am G. Rajkumari. I did the Mini Project in NTSC, Hyderabad for 1 Month. After

successful completion of the training, I was placed in Husys. The training at NTSC



I am M. Sindhuja, D/o: M. Naresh. I did the Industrial Training in NTSC, Hyderabad from

23/11/2015 to 23/05/2016. After successful completion of the training, I was placed in

Schneidu Electronics. The training at NTSC gave me the required skills & confidence to

perform well in my job. My salary package is Rs. 96,000/- per Annum.

I am V. Swathi, D/o: V. Bhaskar. I did the Industrial Training in NTSC, Hyderabad

from 23/11/2015 to 23/05/2016. After successful completion of the training, I was

placed in Schneidu Electronics. The training at NTSC gave me the required skills &

confidence to perform well in my job. My salary package is Rs. 96,000/- per Annum.

I am CH. Rajitha, D/o: CH. Srinivas. I did the Industrial Training in NTSC,


training, I was placed in Schneidu Electronics. The training at NTSC gave me the

required skills & confidence to perform well in my job. My salary package is Rs.

96,000/- per Annum.

I am E. Mamatha, D/o: E. Ramulu. I did the Industrial Training in NTSC,


training, I was placed in Schneidu Electronics. The training at NTSC gave me the


96,000/- per Annum.

I am Bonthu Kumar, S/o: Bonthu Srinivas. I did the Tally in NTSC, Hyderabad


placed in Geetha Surgicals as Accountant. The training at NTSC gave me the

required skills & confidence to perform well in my job. My salary package is

Rs. 1,44,000/- P.A

I am P. Aishwarya Lakshmi, D/o: P.T. Krishna Mohan Raj. I did the M.S. Office &

Internet in NTSC, Hyderabad from 11/05/2016 to 11/06/2016. After successful

completion of the training, I was placed in HMWS & SB as Assistant Accountant.

The training at NTSC gave me the required skills & confidence to perform well in

my job. My salary package is Rs. 1,68,000/- per Annum.

I am D. Sakunthala, D/o: A. Venkateswarlu. I did the Tally in NTSC, Hyderabad from


Chaitanya School, ECIL, Hyderabad as Office Assistant. The training at NTSC gave

me the required skills & confidence to perform well in my job. My salary package is

Rs. 1,56,000/- per Annum.

I am B. Vivek Aquila, S/o: B. Shankar Thomas. I did the MBA Project in NTSC,


training, I was placed in Hetro as Hr executive. The training at NTSC gave me the


2,40,000/- per Annum.

I am B. Poojitha, D/o: Shanmukha Rao. I did the Tally in NTSC, Hyderabad from


NTSC, Hyderabad. The training at NTSC gave me the required skills & confidence to

perform well in my job. My salary package is Rs. 84,000/- per Annum.

I am P. Srinath, S/o: P. Narsing Rao. I did the MBA Project in NTSC, Hyderabad


placed in Gokulraj Transport as Accountant. The training at NTSC gave me the

required skills & confidence to perform well in my job. My salary package is


I am M. Prashanthi, D/o: M. Govinda Rao. I did the Advanced Beautician in

NTSC, Hyderabad from 26/05/2016 to 26/07/2016. After successful completion

of the training, I was placed in NICSY Beauty Parlour. The training at NTSC



I am S. Prem Sai, S/o: S. Sugandhan. I did the Tally in NTSC, Hyderabad from

26/10/2015 to 26/11/2015. After successful completion of the training, I was

placed in Data Floor India Pvt. Ltd. The training at NTSC gave me the required

skills & confidence to perform well in my job. My salary package is Rs.

1,80,000/- per Annum.

I am M. Usha Rani, D/o: Raghava Rao. I did the Advanced Beautician in NTSC,


training, I was placed in Dreamz Beauty Parlour, Hi-Tension Road, A.S.Rao

Nagar, Hyderabad. The training at NTSC gave me the required skills &

confidence to perform well in my job. My salary package is Rs. 1,80,000/- per

Annum.

I am Sai Ramakanth. I did the Multimedia – I & II in NTSC, Hyderabad for 2

Months. After successful completion of the training, I was placed in Adikiswa

Energy and Control Technologies Pvt. Ltd as Assistant Manager. The training at

NTSC gave me the required skills & confidence to perform well in my job. My

salary package is Rs. 1,44,000/- per Annum.

I am M. Vijayalaxmi, D/o: M. Shankar Reddy. I did the Tally in NTSC,


training, I was placed in NTSC, Hyderabad as Data Operator. The training at

NTSC gave me the required skills & confidence to perform well in my job. My

salary package is

Rs. 84,000/- per Annum.

I am S. Maha Lakshmi, D/o: Subhaskara Babu. I did the Tally in NTSC,


training, I was placed in AMTECH Liabaratories. The training at NTSC gave me

the required skills & confidence to perform well in my job. My salary package is


I am Y. Suchitra Yadav, D/o: Y. Mallaiah. I did the MBA Project in NTSC,


training, I was placed in Ryan India Tax Service Pvt. Ltd. The training at NTSC



I am D. Vishwani, D/o: D. Srinivas. I did the MBA Project in NTSC,


training, I was placed in Ryan India Tax Service Pvt. Ltd. The training at NTSC


package is Rs. 2, 40,000/- per Annum.

I am D. Neelima, D/o: D. Balraj. I did the MBA Project in NTSC, Hyderabad

from 21/04/2016 to 04/06/2016. After successful completion of the training, I

was placed in Ryan India Tax Service Pvt. Ltd. The training at NTSC gave me



I am M. Gayathri, D/o: M. Sathaiah. I did the MBA Project in NTSC,


training, I was placed in Broadsige Financial Solutions process Analyst . The

training at NTSC gave me the required skills & confidence to perform well in


I am Nicolatte Jassawala, D/o: Tony Jassawala. I did the MBA Project in NTSC,


training, I was placed in Security Firm, Kharkana. The training at NTSC gave

me the required skills & confidence to perform well in my job. My salary

package is


I am G. Sai Kiran, S/o: G. Venkata Narsimha. I did the MBA Project in NTSC,


training, I was placed in ICICI Bank. The training at NTSC gave me the required


1,44,000/- per Annum.

I am S. Kranthi, S/o: S. Rajalingu. I did the Industrial Training in NTSC,


training, I was placed in Brahmas Electronic World. The training at NTSC gave

me the required skills & confidence to perform well in my job. My salary

package is Rs. 96,000/- per Annum.

I am V. Venkata Lakshmi, D/o: V. Satyanarayana. I did the M.S. Office & Internet

in NTSC, Hyderabad from 04/01/2016 to 04/02/2016. After successful completion

of the training, I was placed in SNR Associates. The training at NTSC gave me



I am P. Shobha, D/o: P. Isthari. I did the M.S. Office & Internet in NTSC,


training, I was placed in Medical Centre. The training at NTSC gave me the


1,08,000/- per Annum.

I am G. Suvarna, D/O: L. Yella Goud. I did the Advance Fashion Designing in

NTSC, Hyderabad from 05/04/2016 to 05/06/2016. I started my own Enterprise in

A.S.Rao Nagar which is yielding a good business. The training at NTSC gave me


Rs. 84,000/- per Annum.

I am P. Giridharan, S/O: P. Pandiarajan. I did the Advanced Multimedia and

Multimedia & Animation Training in NTSC, Hyderabad 6 Months. After

successful completion of the training, I was placed in Solar Electric Enterprise.

The training at NTSC gave me the required skills & confidence to perform well

in my job. My salary package is Rs. 2,16,000/- per Annum.

I am Dabbada Simhachalam, S/O: D. Appala Naidu. I did the Tally in NTSC,


training, I was placed in ECECHCS Ltd, Society Office, A.S.Rao Nagar as

Clerk. The training at NTSC gave me the required skills & confidence to


I am Pooja Hakke, D/o: Madhukar Hakke. I did the MBA Project in NTSC,


training, I was placed in Career Drivers as Associate Talent Advisor. The

training at NTSC gave me the required skills & confidence to perform well in


I am Sorna Joel Jayanth, S/o: S P D PushpaRaj. I did the MBA Project in NTSC,


training, I was placed in Nova Solutions as Tech Support. The training at NTSC



I am Mohd. Shajiuddin, S/o: Mohd. Majeeduddin. I did the MBA Project in

NTSC, Hyderabad from 19/05/2015 to 02/07/2015. After successful completion

of the training, I was placed in Amazon Development Center, India Pvt. Ltd.,

Madhapur as Operational Analyst. The training at NTSC gave me the required


2,40,000/- per Annum.

I am S.Gopi Krishna, S/o: Malleswar Rao. I did the MBA Project in NTSC,


training, I was placed in Anish Degree College,A.S.Rao Nagar,Ecil as

Accountant. The training at NTSC gave me the required skills & confidence to


I am Mohd Bilal, S/o:Mohd.Bagar. I did the MBA Project in NTSC, Hyderabad


placed in FactSet as Research Analyst. The training at NTSC gave me the required


1,80,000/- per Annum.

I am Mohd Tajuiddin, S/o:Mohd.Hameedudin. I did the MBA Project in NTSC,


training, I was placed in Amazon as Financial Analyst. The training at NTSC gave

me the required skills & confidence to perform well in my job. My salary package

is Rs. 1,80,000/- per Annum.

Cnc & cad/cam

Department

I am A Ambati Srikanth. I am Completed CNC Milling Training in NSIC, Hyderabad

during the Period 01-12-2015 To 14-01-2016. After successful completion of the training,I

Attended Job Mela Orgainsed By NSIC-TSC, Hyd. in th M/o. Feb'2016. I was placed in

Azad Engineering Works, Jeedimetla, as a Milling Operator. My Salary Package is Rs.

96,000/- per Annum

I am A Y Ganapathi. I am Completed CNC Milling Training in NSIC, Hyderabad during

the Period 14-06-2016 To 28-07-2016. After successful completion of the training, I was

placed in Vem Technologies Pvt. Ltd., Shamsabad, as a Junior Technician.. My Salary

Package is Rs. 96,000/- per Annum

I am A D Rakeshnath. I am Completed Auocad, Pro-E A Main Project Training in

NSIC, Hyderabad during the Period 09-02-2015 to 23-04-2015. After successful

completion of the training, I was placed in NSIC-TSC, Hyderabad, as a Cad/Cam

Unigraphics Faculty. My Salary Package is Rs. 1,44,000/- per Annum

I am A M Muni RAj. I am Completed CNC Milling Training in NSIC, Hyderabad during

the Period 09-05-2016 to 22-06-2016. After successful completion of the training, I was

placed in Faith Tooling Equpment. Jeedimetla, as a CNC Milling Operator.. My Salary


I am K Sudheer Babu. I am Completed Autocad 2D & 3D Training in NSIC,

Hyderabad during the Period 12-08-2016 To 09-09-2016. After successful completion of

the training, I was placed in Shurti Design Kukatpally, Hyderabad, as a Artitech Design.

My Salary Package is Rs. 1,08,000/- per Annum

I am V Laxmi Narayana. I am Completed Diploma Industrial Training in NSIC,

Hyderabad during the Period 01-12-2015 to 31-05-2016. After successful completion of

the training, I was placed in Azad Engineering Pvt. Ltd., Hyderabad, as a CNC Milling

Operator. My Salary Package is Rs. 1,00,000/- per Annum

I am A B Shravan Kumar. I am Completed Diploma Industrial Training in NSIC,

Hyderabad during the Period 01-12-2015 To 31-05-2016. After successful completion of

the training, I was placed in Azad Engineering Pvt. Ltd., Balanagar, Hyderabad, as a CNC


I am A M Yesepu S/o. Mahender Kumar. I am Completed CNC Milling Training in

NSIC, Hyderabad during the Period 08-08-2016 To 21-09-2016. After successful

completion of the training, I was placed in Valtree Global Pvt. Ltd., IDA Mallapur,

Hyderabad as a CNC Milling Operator.. My Salary Package is Rs. 1,80,000/- per Annum

I am A K Ramesh S/O. Kamera Rajanna. I am Completed Master Certificate Course In

CNC & Cad/Cam Training in NSIC, Hyderabad during the Period 15-07-2016 To 13-10-

2016. After successful completion of the training, I was placed in Sun PoliversPvt. Ltd.,

Cherlapally, Hyderabad, as a CNC Operator. My Salary Package is Rs. 1,08,000/- per

Annum

I am A B Kiran Kumar S/o. B Mogulanna . I am Completed Master Certificate Course

In CNC & Cad/Cam Training in NSIC, Hyderabad during the Period 27-06-2016 To

26-09-2016. After successful completion of the training, I was placed in Sun PoliversPvt.

Ltd., Cherlapally,Hyderabad as a CNC Milling Operator & Programmer.. My Salary

Package is Rs. 1,56,000/- per Annum

I am A Asish Gouda. I am Completed Completed Master Certificate Course In CNC &

Cad/Cam Training in NSIC, Hyderabad during the Period 12-08-2016 to 09-11-2016.

After successful completion of the training, I was placed in Mando Industries Ltd,

Chenni, as a CNC Milling Operator. My Salary Package is Rs. 1,14,000/- per Annum

I am A S Venkateshwarlu . I am Completed Master Certificate Course In CNC &

Cad/Cam Training in NSIC, Hyderabad during the 15-07-2016 to 13-10-2016. After

successful completion of the training, I was placed in Alpath Engineering Pvt. Ltd,

Hyderabad, as a CNC Milling Operator. My Salary Package is Rs.1,68,000/- per Annum

I am A A Suresh. I am Completed Completed Turning Training in NSIC, Hyderabad

during the Period April 2016. After successful completion of the training, I was placed in

CM Hydro System Pvt. Ltd., Cherlapally, as a CNC Turning Operator. My Salary

Package is Rs. 1,00,000/- per Annum

I am A Bathena Saidulu . I am Completed Master Certificate Course In CNC &


successful completion of the training, I was placed in ECIL, Hyderabad, as a CNC

Milling Machinist My Salary Package is Rs.1,80,000/- per Annum

I am A K Bhujangam. I am Completed Completed Diploma Industrial Training in


completion of the training, I was placed in Sri Sai Ram Enterprices, Kushaiguda, as a

CNC Milling Operator. My Salary Package is Rs. 1,08,000/- per Annum

I am A Gottapu Bhaskara Rao . I am Completed Master Certificate Course In CNC

& Cad/Cam Training in NSIC, Hyderabad during the 27-06-2016 to 24-09-2016. After

successful completion of the training, I was placed in Sun Polymaries, Cherlapally,

Hyderabad, as a CNC Milling Operator. My Salary Package is Rs.1,44,000/- per Annum

I am A A Yohan Jeevan Kumar S/O. A Rama Rao . I am Completed Completed

Cad/Cam UnigraphicTraining in NSIC, Hyderabad during the Period 12-08-2016 to 09-

11-2016. After successful completion of the training, I was placed in Mando Industries

Ltd, Chenni, as a CNC Milling Operator. My Salary Package is Rs. 1,14,000/- per

Annum

I am A P Sravanthi . I am Completed Autocad 2D & 3DTraining in NSIC, Hyderabad

during the 18-07-2016 to 23-08-2016. After successful completion of the training, I was

placed in VL Designers, Dammaiguda, Hyderabad, as a Autocad Designing. My Salary

Package is Rs.84,000/- per Annum

I am A D Prudhvi . I am Completed Completed Autocad 2D & 3DTraining in NSIC,


the training, I was placed in 24X7, Ramanthapur, as a Draft man. My Salary Package is

Rs. 1,44,000/- per Annum

I am A Challa Arun . I am Completed Autocad 2D & 3D Training in NSIC, Hyderabad


placed in 24X7, Ramanthapur, as a Draft man. My Salary Package is Rs.1,44,000/- per

Annum

I am A A Mahesh Babu. I am Completed Completed CNC Turning Training in NSIC,


the training, I was placed in Hyderabad Metal Craft, Thukugudem as a CNC Turning


I am A G Giridhara Chars . I am Completed CNC TurningTraining in NSIC, Hyderabad


placed in Unique Engineering Pvt. Ltd., Cherlapally, Hyderabad, as a CNC Turning

Operator. My Salary Package is Rs.1,80,000/- per Annum

I am A B Raj Kumar S/O. B Poshaiah. I am Completed Completed Master Certificate

Course In CNC & Cad/Cam Training in NSIC, Hyderabad during the Period 12-08-

2016 to 09-11-2016. After successful completion of the training, I was placed in Jaya

Engineering, Kushaiguda, as a CNC Milling Operator. My Salary Package is Rs.

1,14,000/- per Annum

I am A P Nagaraju. I am Completed Master Certificate Course In CNC & Cad/Cam

Training in NSIC, Hyderabad during the 12-08-2016 to 09-11-2016. after successful

completion of the training, I was placed in Jaya Engineering, Kushaiguda, Hyderabad,

as a CNC Milling Operator. My Salary Package is Rs.84,000/- per Annum

I am A B Sri Sai Kalyan. I am Completed Completed Autocad 2D & 3D Training in


completion of the training, I Attened Job Mela On 28-12-2016 & I was placed in Atlas

Copco India Ltd. Cherlapally, as a CNC Milling Operator. My Salary Package is Rs.


I am A G Shiv Kumar . I am Completed Master Certificate Course In CNC &


successful completion of the training, I Attened Job Mela On 28-12-2016 & I was placed

in Vasthia Pvt. Ltd., Cherlapally, Hyderabad, as a CNC Milling Operator. My Salary

Package is Rs.84,000/- per Annum

I am A E Venkatesh. I am Completed Completed Master Certificate Course In CNC &


After successful completion of the training, I was placed in Sri Kota, Nellore, as a CNC

Milling Operator. My Salary Package is Rs. 1,14,000/- per Annum

I am A K Sathish Kumar. I am Completed Completed CNC Milling Training in NSIC,


the training, I was placed in Krupa Industries, Cherlapally, as a CNC Milling Operator.


I am A M Ritheesh Kumar. I am Completed Completed Master Cam Training in NSIC,


the training, I was placed in Abhishek Engineering, Kamalanagar, ECIL, Hyderabad,

as a CNC Operator. My Salary Package is Rs. 1,80,000/- per Annum

I am A B Kishore. I am Completed Completed CNC Milling Training in NSIC,


the training, I was placed in Sri Laxmi Engineering Works, Cherlapally, Hyderabad, as

a CNC Operator. My Salary Package is Rs. 1,32,000/- per Annum

I am A R Deevan Kumar. I am Completed Completed Autocad 2D & 3D Training in


completion of the training, I was placed in VL Designers, Dammaiguda, as a Autocad

Designing. My Salary Package is Rs. 84,000/- per Annum

I am A B Vijay Kumar. I am Completed Completed Master Certificate Course In CNC

& Cad/Cam Training in NSIC, Hyderabad during the Period 29-09-2016 to 27-12-2016.

After successful completion of the training, I was placed in Kakati Karshak Industries

Pvt. Ltd., Nacharam, as a CNC Operator. My Salary Package is Rs. 3,12,000/- per

Annum

I am A U Vamshi Vardhan. I am Completed Completed Master Cam Training in NSIC,


the training, I was placed in ICOMM Tele System Pvt. Ltd, as a CNC Milling Operator.


I am A P Srinivasulu. I am Completed Completed CNC TURNING Training in NSIC,


the training, I was placed in HAL,Balanagar as a CNC Operator. My Salary Package is Rs.

98,400/- per Annum

I am A B Anil Kumar. I am Completed Completed Master Certificate Course In CNC


After successful completion of the training, I was placed in KLR Industries Pvt. Ltd

,Cherlapally, as a CNC Operator. My Salary Package is Rs. 98,400/- per Annum

I am A M Manikanth. I am Completed Completed CNC Milling Training in NSIC,


the training, I was placed in Azad Pvt. Ltd, Shahpur, as a CNC Operator. My Salary


I am A Ramgiri Ajay. I am Completed Completed Autocad 2D & 3D Training in NSIC,


the training, I was placed in Azad Pvt. Ltd, Shahpur, as a CNC Operator. My Salary


I am A Simhachalam Alubilli. I am Completed Completed CNC Milling Training in


completion of the training, I was placed in Harini Engineering, Chintal, Balanagar, as a

CNC Operator. My Salary Package is Rs. 1,80,400/- per Annum

I am A D Kurumaiah. I am Completed Completed CNC Turningg Training in NSIC,


the training, I was placed in HBL, Shamirpet, as a CNC Operator. My Salary Package is

Rs. 1,92,000/- per Annum

I am A R Naveen Reddy. I am Completed Completed CNC Turning Training in NSIC,


the training, I was placed in KLR, Cherlapally, as a CNC Operator. My Salary Package

is Rs. 90,000/- per Annum

I am A Y Nagul Meer. I am Completed Completed CNC Milling Training in NSIC,

Hyderabad during the Period 2014. After successful completion of the training, I was

placed in S.K.M System Pvt. Ltd., ECIL, Hyd., as a CNC Operator. My Salary Package

is Rs. 1,00,000/- per Annum

I am A M Anil Kumar. I am Completed Completed Master Certificate Course In CNC


After successful completion of the training, I was placed in Kamala Anand Engineering,

IDA Uppal, Hyd. as a CNC Programmer & Operator. My Salary Package is Rs. 90,000/-

per Annum

I am A P Balaji Ashok. I am Completed Completed Master Certificate Course In CNC


After successful completion of the training, I was placed in RMSI Pvt. Ltd., Hi-Tech,

Hyd, IDA Uppal, Hyd. as a Cad Designing. My Salary Package is Rs. 1,80,000/- per

Annum

I am A D Tarun Varma. I am Completed Completed Master Certificate Course In

CNC & Cad/Cam Training in NSIC, Hyderabad during the Period 21-01-2016 to 19-04-

2016. After successful completion of the training, I was placed in Aryan Enterprises,

Cherlapally, Hyd, IDA Uppal, Hyd. as a CNC Operator. My Salary Package is Rs.


SOFTWARE-I

Department

I am SONIYA DUDHWAL. I did the Dot Net training in NTSC, Hyderabad during the

Period 03-11-15 T0 04-01-16. After successful completion of the training, I was placed in

TCS. The Training at NTSC gave me the required skills & confidence to perform well in my

job. My salary package is Rs.3,00,000/- per Annum.

I am KVSP SAMEER SRIDHAR. I did the Dot Net training in NTSC, Hyderabad during

the Period 29-01-16 T0 29-03-16. After successful completion of the training, I was placed

in PATH INFOTECH. The Training at NTSC gave me the required skills & confidence to

perform well in my job. My salary package is Rs.3,00,000/- per Annum.

I am S.NANDINI. I did the Dot Net training in NTSC, Hyderabad during the Period 16-10-

15 T0 16-12-15. After successful completion of the training, I was placed in WIPRO. The

Training at NTSC gave me the required skills & confidence to perform well in my job. My

salary package is Rs.3,00,000/- per Annum.

Iam V.ANIL KUMAR. I did the Dot Net training in NTSC, Hyderabad during the Period

18-08-15 T0 19-10-15. After successful completion of the training, I was placed in

INFOSIS. The Training at NTSC gave me the required skills & confidence to perform well

in my job. My salary package is Rs.3,00,000/- per Annum.

I am KASALA KALPANA. I did the Dot Net training in NTSC, Hyderabad during the


ZSS . The Training at NTSC gave me the required skills & confidence to perform well in

my job. My salary package is Rs.3,00,000/- per Annum.

I amKASI REDDY HARISH. I did the Dot Net training in NTSC, Hyderabad during the


ACCENTURE. The Training at NTSC gave me the required skills & confidence to perform

well in my job. My salary package is Rs.3,00,000/- per Annum.

I am N.GOWTHAM. I did the Dot Net training in NTSC, Hyderabad during the Period 07-

09-15 T0 09-11-15. After successful completion of the training, I was placed in VOLVA IT

Bangalore . The Training at NTSC gave me the required skills & confidence to perform


I am G.LAVANYA. I did the Dot Net training in NTSC, Hyderabad during the Period 22-

09-15 T0 23-11-15. After successful completion of the training, I was placed inWDC

CONSULTING Mumbai. The Training at NTSC gave me the required skills & confidence

to perform well in my job. My salary package is Rs.3,00,000/- per Annum.

I am PRABATH KUMAR. I did the Dot Net training in NTSC, Hyderabad during the


TIBCO SOFTWARE Pune. The Training at NTSC gave me the required skills &

confidence to perform well in my job. My salary package is Rs.3,00,000/- per Annum.

I am M.RAMA SWAMY. I did the S/W.Testing Tools training in NTSC, Hyderabad

during the Period 16-11-15 T0 18-01-16. After successful completion of the training, I was

placed in XILINX. The Training at NTSC gave me the required skills & confidence to


I am K.VIJAY KUMAR. I did the S/W.Testing Tools training in NTSC, Hyderabad during


in XILINX. The Training at NTSC gave me the required skills & confidence to perform


I am M.ARCHANA. I did the S/W.Testing Tools training in NTSC, Hyderabad during the


XILINX. The Training at NTSC gave me the required skills & confidence to perform well


I am SURINEDI TANMAYI. I did the S/W.Testing Tools training in NTSC, Hyderabad




I am A.DILLI PRASANNA. I did the S/W.Testing Tools training in NTSC, Hyderabad




I am B.SRAVANI. I did the Oracle training in NTSC, Hyderabad during the Period 23-

12-15 T0 12-02-16. After successful completion of the training, I was placed in

MONJIN Pune. The Training at NTSC gave me the required skills & confidence to


I am K.AMRUTHA. I did the Oracle training in NTSC, Hyderabad during the Period 19-04-

16 T0 20-06-16. After successful completion of the training, I was placed in SYNECHRON

TECHNOLOGY. The Training at NTSC gave me the required skills & confidence to


I am K.NIKHIL KUMAR. I did the Oracle training in NTSC, Hyderabad during the

Period 19-04-16 T0 20-06-16. After successful completion of the training, I was placed

in WDC Mumbai. The Training at NTSC gave me the required skills & confidence to


I am A.JAI TIRU GANESH. I did the Oracle training in NTSC, Hyderabad during the


in RAVE TECHOLOGIES. The Training at NTSC gave me the required skills &


I am K.SUREKHA. I did the Oracle training in NTSC, Hyderabad during the Period 14-

12-15 T0 15-02-16. After successful completion of the training, I was placed

inDOPSON PHARMA Mumbai. The Training at NTSC gave me the required skills &


I am T.P.VINAY KUMAR. I did the Oracle training in NTSC, Hyderabad during the


in TIBCO SOFTWARE. The Training at NTSC gave me the required skills &


I am AYESHA FATHIMA. I did the Oracle training in NTSC, Hyderabad during the Period

22-02-16 T0 22-04-16. After successful completion of the training, I was placed in HCL.

The Training at NTSC gave me the required skills & confidence to perform well in my job.

My salary package is Rs.3,50,000/- per Annum.

I am K.REVATHI. I did the Java training in NTSC, Hyderabad during the Period 14-06-16

T0 29-07-16. After successful completion of the training, I was placed in IBM. The



I am N.RAVALI. I did the Java training in NTSC, Hyderabad during the Period 14-06-16

T0 29-07-16. After successful completion of the training, I was placed in MERCE



I am A.NARESH. I did the Java training in NTSC, Hyderabad during the Period 03-06-16

T0 18-07-16. After successful completion of the training, I was placed in ENEVATORS

GLOBAL. The Training at NTSC gave me the required skills & confidence to perform


I am J.KRUPAKAR. I did the Java training in NTSC, Hyderabad during the Period 03-06-

16 T0 18-07-16. After successful completion of the training, I was placed in SAHITHYA

TECHNOLOGIES. The Training at NTSC gave me the required skills & confidence to


I am G.SRAVYA. I did the Java training in NTSC, Hyderabad during the Period 03-06-16

T0 18-07-16. After successful completion of the training, I was placed in CEM BUSINESS

SOLUTIONS. The Training at NTSC gave me the required skills & confidence to perform


I am P.SWETHA. I did the Embedded Systems VLSI &Matlab training in NTSC,

Hyderabad during the Period 20-05-15 T0 22-07-15. After successful completion of the

training, I was placed in QUAD ELECTRONICS. The Training at NTSC gave me the

required skills & confidence to perform well in my job. My salary package is Rs.2,50,000/-

per Annum.

I am G.JAGADISH. I did the Embedded Systems VLSI &Matlab training in NTSC,


training, I was placed in IBM. The Training at NTSC gave me the required skills &


I am S.SWAPANA. I did the Embedded Systems VLSI &Matlab training in NTSC,


training, I was placed in HCL. The Training at NTSC gave me the required skills &


I am M.VENKATA DEEPA. I did the Embedded Systems VLSI &Matlab training in

NTSC, Hyderabad during the Period 16-05-16 T0 18-07-16. After successful completion of

the training, I was placed in ROBERT BOSCH Banglore. The Training at NTSC gave me


Rs.2,70,000/- per Annum.

I am M.ARIFA SIIDIQUA. I did the Embedded Systems VLSI &Matlab training in NTSC,


training, I was placed in HCL. The Training at NTSC gave me the required skills &


I am M.NAGARAJU. I did Main Project training in NTSC, Hyderabad during the Period

16-12-15 T0 16-02-16. After successful completion of the training, I was placed in MOBIS

India Ltd. The Training at NTSC gave me the required skills & confidence to perform well


I am D.RAMA DEVI. I did Main Project training in NTSC, Hyderabad during the Period


BAYCROP SOFTWARE. The Training at NTSC gave me the required skills & confidence

to perform well in my job. My salary package is Rs.3,60,000/- per Annum.

I am R.PRIYANKA. I did the Mini project training in NTSC, Hyderabad during the Period


CRYPTOGRAPH Technologies. The Training at NTSC gave me the required skills &


I am P.SHILPA. I did the internship training in NTSC, Hyderabad during the Period18-04-

16 T0 18-06-16. After successful completion of the training, I was placed in BALLY

TECHNOLOGIES Chennai. The Training at NTSC gave me the required skills &


I am B.S.VALLABHANENI. I did the internship training in NTSC, Hyderabad during the


TCS. The Training at NTSC gave me the required skills & confidence to perform well in


I am NINOO SUSAN CHERIAN. I did the internship training in NTSC, Hyderabad during


in TECH MAHINDRA. The Training at NTSC gave me the required skills & confidence to


I amY.HEMA. I did the internship training in NTSC, Hyderabad during the Period 24-05-

16 T0 25-07-16. After successful completion of the training, I was placed in ZINAVO



I am B.ANUSHA. I did the internship training in NTSC, Hyderabad during the Period 12-

02-16 T0 12-04-16. After successful completion of the training, I was placed in TCS. The



I am M.SAI CHARAN. I did the internship training in NTSC, Hyderabad during the Period


MILECORE Pune. The Training at NTSC gave me the required skills & confidence to


I am C.ASHWINI I did the internship training in NTSC, Hyderabad during the Period 23-

01-16 T0 23-03-16. After successful completion of the training, I was placed in MPHASIS

Pune. The Training at NTSC gave me the required skills & confidence to perform well in


ELECTRONICS

Department

SUCCESS STORY OF TRAINEES

Name of the Trainee: K. MOHANA PRIYANKA

Father’s Name: K. JANARDHANA RAO

Address: VILLAGE T.TAKKELLAPADU(VI), MANDAL J.PANGULUR, DIST PRAKASAM, A.P.

Contact Number: 9550508882

FAMILY BACKGROUND:

Ms. K. MOHANA PRIYANKA, belongs to a backward middle class family from rural area. She resides in a very small village

in T.TAKKELLAPADU. She underwent INTERNSHIP 2 months in NSIC-Technical Services Centre, Hyderabad. During her

training period she gained good practical knowledge/Skill as per the requirement of Electronics Industries.

After successful completion of her course she got placed in M/s. BIG APPLE LIFE PVT LTD, SD Road, Secunderabad,

Telangana, through Job Mela organized by NSIC-TSC, Hyderabad.

PRESENT STATUS:

Presently Ms. K. MOHANA PRIYANKA is working as a Technician in M/s. BIG APPLE LIFE and she is drawing a salary of

Rs 15000/- per month.


Name of the Trainee: P. LAVANYA

Address: VILLAGE KOTHAPALLI, MANDAL JAMMIKUNTA,

DIST KARIMNAGAR, TELANGANA.


FAMILY BACKGROUND:

Ms. P. LAVANYA, belongs to a backward middle class family from rural area. She resides in a very small village in

KOTHAPALLI. She underwent Diploma Industrial Training 6 months in NSIC-Technical Services Centre, Hyderabad.

During her training period she gained good practical knowledge/Skill as per the requirement of Electronics Industries.

After successful completion of her course she got placed in M/s. LINCO PVT LTD, RADIKA Road,

KAMALANAGAR,ECIL,HYD. Telangana, through Job Mela organized by NSIC-TSC, Hyderabad.

PRESENT STATUS:

Presently Ms. P. LAVANYA is working as a Technician in M/s. LINCO PVT LTD and she is drawing a salary of Rs 9000/- per

month.


Name of the Trainee: N.SANDHYA

Address: H.NO:-2-8, KOTALAGADDA (VI),

DOMAKONDA (M), KAMAREDDY DIST.


FAMILY BACKGROUND:

Ms. N.SANDHYA, belongs to a backward middle class family from rural area. She resides in a very small village in

KOTALAGADDA. She underwent Diploma Industrial Training 6 months in NSIC-Technical Services Centre, Hyderabad.


After successful completion of her course she got placed in M/s. RUPE PAYTECH PVT LTD, HYD. Telangana, through Job

Mela organized by NSIC-TSC, Hyderabad.

PRESENT STATUS:

Presently Ms. N.SANDHYA is working as a Technician in M/s. RUPE PAYTECH PVT LTD and she is drawing a salary of Rs

7000/- per month.


Name of the Trainee: P.F LEVI

Address: T.R.R POLYTECHNIC,HYD.


FAMILY BACKGROUND:

Mr. P.F LEVI, belongs to a backward middle class family from rural area. He resides in a very small village. He underwent

Diploma Industrial Training 6 months in NSIC-Technical Services Centre, Hyderabad. During his training period he gained

good practical knowledge/Skill as per the requirement of Electronics Industries.

After successful completion of his course he got placed in M/s. M2M SCADA SOLUTIONS PVT LTD, HYD, Telangana,

through Job Mela organized by NSIC-TSC, Hyderabad.

PRESENT STATUS:

Presently Mr. P.F LEVI is working as a Technician in M/s. M2M SCADA SOLUTIONS PVT LTD and he is drawing a salary

of Rs 15000/- per month.


Name of the Trainee: S. RAJU

Father’s Name: S. NARSIMHA

Address:NAGINEPALLY(V), BOMMALARAMRAM(M),NALGONDA(DIST).


FAMILY BACKGROUND:

Mr. S. RAJU, belongs to a backward middle class family from rural area. He resides in a very small village in

NAGINEPALLY. He underwent ELECTRONICS TESTING AND ASSEMBLY OPERATOR 2 months in NSIC-Technical

Services Centre, Hyderabad. During his training period he gained good practical knowledge/Skill as per the requirement of

Electronics Industries.

After successful completion of his course he got placed in M/s. ECIL LTD, ECIL, Secunderabad, Telangana, through Job Mela

organized by NSIC-TSC, Hyderabad.

PRESENT STATUS:

Presently Mr. S. RAJU is working as a Technician in M/s. ECIL LTD, and he is drawing a salary of Rs 10000/- per month.


Name of the Trainee: MALLESH

Address: JPNC, DIPLOMA COLLEGE, MAHABOOBNAGAR DIST.


FAMILY BACKGROUND:

Mr. MALLESH, belongs to a backward middle class family from rural area. He resides in a very small village. In

Mahaboobnagar He underwent Diploma Industrial Training 6 months in NSIC-Technical Services Centre, Hyderabad.

During his training period he gained good practical knowledge/Skill as per the requirement of Electronics Industries.

After successful completion of his course he got placed in M/s. BN AGENCY PVT LTD, HYD, Telangana, through Job Mela


PRESENT STATUS:

Presently Mr. MALLESH is working as a Technician in M/s. BN AGENCY PVT LTD and he is drawing a salary of Rs

10000/- per month.


Name of the Trainee: UDAY



FAMILY BACKGROUND:

Mr. UDAY, belongs to a backward middle class family from rural area. He resides in a very small village. In Mahaboobnagar

He underwent Diploma Industrial Training 6 months in NSIC-Technical Services Centre, Hyderabad. During his training

period he gained good practical knowledge/Skill as per the requirement of Electronics Industries.



PRESENT STATUS:

Presently Mr. UDAY is working as a Technician in M/s. BN AGENCY PVT LTD and he is drawing a salary of Rs 10000/-

per month.


Name of the Trainee: MURALI MOHAN REDDY



FAMILY BACKGROUND:

Mr. MURALI MOHAN REDDY, belongs to a backward middle class family from rural area. He resides in a very small

village. In Mahaboobnagar He underwent Diploma Industrial Training 6 months in NSIC-Technical Services Centre,

Hyderabad. During his training period he gained good practical knowledge/Skill as per the requirement of Electronics

Industries.



PRESENT STATUS:

Presently Mr. MURALI MOHAN REDDY is working as a Technician in M/s. BN AGENCY PVT LTD and he is drawing a

salary of Rs 10000/- per month.


Name of the Trainee: VIJAY BHASKAR REDDY



FAMILY BACKGROUND:

Mr. VIJAY BHASKAR REDDY, belongs to a backward middle class family from rural area. He resides in a very small

village. In Mahaboobnagar He underwent Diploma Industrial Training 6 months in NSIC-Technical Services Centre,


Industries.



PRESENT STATUS:

Presently Mr. VIJAY BHASKAR REDDY is working as a Technician in M/s. BN AGENCY PVT LTD and he is drawing a



Name of the Trainee: PEDDYREDDY BHARATH REDDY

Father’s Name: PEDDYREDDY BHASKER REDDY

Address:H.NO:-5-94/1,DOMAKONDA(V), (M),NIZAMBAD(DIST).


FAMILY BACKGROUND:

Mr. PEDDYREDDY BHARATH REDDY, belongs to a backward middle class family from rural area. He resides in a very

small village in DOMAKONDA. He underwent Diploma Industrial Training 6 months in NSIC-Technical Services Centre,


Industries.

After successful completion of his course he got placed in M/s. ASTRA MICROWAVE PRODUCTS LTD.KONDAPUR

HITECH CITY, HYD, Telangana, through Job Mela organized by NSIC-TSC, Hyderabad.

PRESENT STATUS:

Presently Mr. PEDDYREDDY BHARATH REDDY is working as a Technician in M/s. ASTRA MICROWAVE, PRODUCTS

LTD and he is drawing a salary of Rs 10000/- per month.


Name of the Trainee: K. RAMMOHAN REDDY

Father’s Name: K. KRISHNA REDDY

Address:H.NO;-1-37,THIMMAIPALLY(V),KEESARA (M),R.R (DIST).


FAMILY BACKGROUND:

Mr. K. RAMMOHAN REDDY, belongs to a backward middle class family from rural area. He resides in a very small village

in THIMMAIPALLY. He underwent ELECTRONICS TESTING AND ASSEMBLY OPERATOR 2months in NSIC-

Technical Services Centre, Hyderabad. During his training period he gained good practical knowledge/Skill as per the

requirement of Electronics Industries.

After successful completion of his course he got placed in M/s. MEDHA SERVO DRIVES,GHATKASAR,R.R DIST., HYD,


PRESENT STATUS:

Presently Mr. K. RAMMOHAN REDDY is working as a Technician in M/s. MEDHA SERVO DRIVES and he is drawing a

salary of Rs 10,000/- per month.


Name of the Trainee: C. BALA KRISHNA

Address: H.NO:-12-2-790/167/A/18, SRI RAM NAGAR,

BOJAGUTTA, MEHDIPATNAM.


FAMILY BACKGROUND:

Mr. C. BALA KRISHNA, belongs to a backward middle class family from urban area He resides in hyderabadcurently.. He

underwent ELECTRONICS & PC HARD WARE 3months in NSIC-Technical Services Centre, Hyderabad. During his

training period he gained good practical knowledge/Skill as per the requirement of Electronics Industries.

After successful completion of his course he got placed in M/s. MEDHA SERVO DRIVES, GHATKASAR,JODIMATLA,R.R

DIST., HYD, Telangana, through Job Mela organized by NSIC-TSC, Hyderabad.

PRESENT STATUS:

Presently Mr. C. BALA KRISHNA is working as a Technician in M/s. MEDHA SERVO DRIVES and he is drawing a salary

of Rs 10,000/- per month.


Name of the Trainee: VENU GOPAL

Address:SINDURAPOLYTECHNIC,GODAWARIKHANI(V), (M)

KARIMNAGAR (DIST).


FAMILY BACKGROUND:

Mr. VENU GOPAL, belongs to a backward middle class family from rural area. He resides in a very small village in

GODAWARIKHANI. He underwent Diploma Industrial Training 6 months in NSIC-Technical Services Centre, Hyderabad.




PRESENT STATUS:

Presently Mr. VENU GOPAL is working as a Technician in M/s. MEDHA SERVO DRIVES and he is drawing a salary of Rs

10,000/- per month.


Name of the Trainee: RAJENDAR

Address:SINDURAPOLYTECHNIC

,KATARAM(V),

(M),KARIMNAGAR (DIST).

Contact Number:

FAMILY BACKGROUND:

Mr. : RAJENDAR, belongs to a backward middle class family from rural area. He resides in a very small village in

KATARAM. He underwent Diploma Industrial Training 6 months in NSIC-Technical Services Centre, Hyderabad. During

his training period he gained good practical knowledge/Skill as per the requirement of Electronics Industries.



PRESENT STATUS:

Presently Mr. : RAJENDAR is working as a Technician in M/s. MEDHA SERVO DRIVES and he is drawing a salary of Rs

10,000/- per month.


Name of the Trainee: NARESH MAKALA

Address: SINDURAPOLYTECHNIC, KATARAM (V),



FAMILY BACKGROUND:

Mr. : NARESH MAKALA, belongs to a backward middle class family from rural area. He resides in a very small village in

KATARAM. He underwent Diploma Industrial Training 6 months in NSIC-Technical Services Centre, Hyderabad. During


After successful completion of his course he got placed in M/s. I.C.D IMPORT & EXPORT , KUKATPALLY., HYD,


PRESENT STATUS:

Presently Mr. : NARESH MAKALA is working as a Technician in M/s. . I.C.D IMPORT & EXPORT and he is drawing a



Name of the Trainee: RIYAZ

Address:SINDURAPOLYTECHNIC,GODAWARIKHANI(V),



FAMILY BACKGROUND:

Mr. RIYAZ, belongs to a backward middle class family from rural area. He resides in a very small village in





PRESENT STATUS:

Presently Mr. RIYAZ is working as a Technician in M/s. MEDHA SERVO DRIVES and he is drawing a salary of Rs 10,000/-

per month.


Name of the Trainee: P. SATHISH KUMAR PITANI

Address: DOOR NO:-178//APHASE 2,

ALWYN COLONY, KUKUTPALLY,HYD..

FAMILY BACKGROUND:

Mr. : P. SATHISH KUMAR PITANI, belongs to a backward middle class family from urban area He resides in

hyderabadcurently.. He underwent Diploma Industrial Training 6 months in NSIC-Technical Services Centre, Hyderabad.


After successful completion of his course he got placed in M/s. KEVIN KIRAN PRIVATE LIMITED, , HYD, Telangana,


PRESENT STATUS:

Presently Mr. : P. SATHISH KUMAR PITANI is working as a Technician in M/s. KEVIN KIRAN PRIVATE LIMITED, and

he is drawing a salary of Rs 8,000/- per month.


Name of the Trainee: KASINAIDU BONGU

Father’s Name: KRISHNAMURTYA NAIDU

Address:H.NO;-1-70,M.ALLUVADA(VI),JIYYAMMAVALASA

VIZIANAGARAM (DIST).


FAMILY BACKGROUND:

Mr. KASINAIDU BONGU, belongs to a backward middle class family from rural area. He resides in a very small village in

,M.ALLUVADA. He underwent ELECTRONICS & PC HARD WARE 3months in NSIC-Technical Services Centre,


Industries.

After successful completion of his course he got placed in M/s. PANCHAITHY OFFICE. M.ALLUVADA, , A.P,

PRESENT STATUS:

Presently Mr. KASINAIDU BONGU is working as a Technician in M/s. PANCHAITHY OFFICE and he is drawing a salary of

Rs 75,000/- per month.


Name of the Trainee: K. MANMOHAN

Father’s Name: K. YADAGIRI

Address:H.NO;-16-95/80/2, SANTHOSHNAGAR COLONY,

BALAJI NAGAR, SEC-BAD


FAMILY BACKGROUND:

Mr. K. MANMOHAN, belongs to a backward middle class family from urban area He resides in hyderabadcurently.. He



After successful completion of his course he got placed in M/s. HCUE SOFTWARE SYSTEMS, HYD, Telangana, through Job

Mela organized by NSIC-TSC, Hyderabad

PRESENT STATUS:

Presently Mr. K. MANMOHAN is working as a Technician in M/s. HCUE SOFTWARE SYSTEMS and he is drawing a salary



Name of the Trainee: ALAMPALLY. RAKESH

Father’s Name: A. RAM CHANDER

Address:H.NO;-38-22/37/3, SHIVA NAGAR COLONY,

NEAR SAI BABA TEMPLE, SAINIKPURI ,

SEC-BAD.


FAMILY BACKGROUND:

Mr. ALAMPALLY. RAKESH, belongs to a backward middle class family from urban area He resides in hyderabadcurently..

He underwent ELECTRONICS & PC HARD WARE 3months in NSIC-Technical Services Centre, Hyderabad. During his


After successful completion of his course he got placed in M/s. UNITED HELTH GROUP, (UGH) HYD, Telangana, through

Job Mela organized by NSIC-TSC, Hyderabad

PRESENT STATUS:

Presently Mr. ALAMPALLY. RAKESH is working as a Technician in M/s. UNITED HELTH GROUP, (UGH) HYD and he is

drawing a salary of Rs 10,000/- per month.


Name of the Trainee: CHALLA MANJEKAR

Father’s Name: CHALLA SRINIVAS

Address: KONNEY, BACHANNAPET, WARANGAL,(DIST).


FAMILY BACKGROUND:

Mr. CHALLA MANJEKAR, belongs to a backward middle class family from rural area. He resides in a very small village in

,BHACHANNAPET. He underwent ELECTRONICS & PC HARD WARE 3months in NSIC-Technical Services Centre,


Industries.

After successful completion of his course he got placed in M/s., BIG BASKET HYD, Telangana, through Job Mela organized

by NSIC-TSC, Hyderabad

PRESENT STATUS:

Presently Mr. CHALLA MANJEKAR is working as a Technician in M/s. BIG BASKET HYD and he is drawing a salary of Rs

10,000/- per month.


Name of the Trainee: K. ANIL KUMAR

Father’s Name: K. PAUL

Address:H.NO;-40-51-21/3, SANTHOSH NAGAR, KANCHARAPALEN

VISHAKAPATNAM (DIST).


FAMILY BACKGROUND:

Mr. K. ANIL KUMAR, belongs to a backward middle class family from rural area. He resides in a very small village in , ,

KANCHARAPALEN. He underwent ELECTRONICS & PC HARD WARE 3months in NSIC-Technical Services Centre,


Industries.

After successful completion of his course he got placed in M/s.,NSFC LTD, A.P.

PRESENT STATUS:

Presently Mr. : K. ANIL KUMAR is working as a Technician in M/s. NSFC LTD and he is drawing a salary of Rs 10,000/- per

month.


Name of the Trainee: JANARDHANA RAO DASARI

Father’s Name: GOWRI SANKARA RAO

Address:H.NO;-198, SRI BALAJI APARTMENT,

BANJARA HILLS UPPAL, HYD.


FAMILY BACKGROUND:

Mr. JANARDHANA RAO DASARI, belongs to a backward middle class family from urban area He resides in

hyderabadcurently.. He underwent ELECTRONICS & PC HARD WARE 3months in NSIC-Technical Services Centre,


Industries.


PRESENT STATUS:

Presently Mr. : JANARDHANA RAO DASARI is working as a Technician in M/s. NSFC LTD and he is drawing a salary of

Rs 10,000/- per month.


Name of the Trainee: P. OGESWAR RAO

Father’s Name: VENKATA RAMANA

Address:H.NO;-20/32/2, CHILKANAGAR, UPPAL,

HYD.


FAMILY BACKGROUND:

Mr. P. OGESWAR RAO, belongs to a backward middle class family from urban area He resides in hyderabadcurently.. He




PRESENT STATUS:

Presently Mr. P. OGESWAR RAO is working as a Technician in M/s. NSFC LTD and he is drawing a salary of Rs 10,000/-

per month.


Name of the Trainee: V. KARTHEEK

Father’s Name: CHANDAR RAO

Address:H.NO;-8-36/2, CHILKANAGAR, UPPAL,

HYD.


FAMILY BACKGROUND:

Mr. V. KARTHEEK, belongs to a backward middle class family from urban area He resides in hyderabadcurently.. He




PRESENT STATUS:

Presently Mr. V. KARTHEEK is working as a Technician in M/s. NSFC LTD and he is drawing a salary of Rs 10,000/- per

month.


Name of the Trainee: KONDALA RAO BARLA

Father’s Name: VENKUNAIDU

Address:H.NO;-38-36-2/1, DILSUKNAGAR,

HYD.


FAMILY BACKGROUND:

Mr. KONDALA RAO BARLA, belongs to a backward middle class family from urban area He resides in hyderabadcurently..

He underwent ELECTRONICS & PC HARD WARE 3months in NSIC-Technical Services Centre, Hyderabad. During his



PRESENT STATUS:

Presently Mr. KONDALA RAO BARLA is working as a Technician in M/s. NSFC LTD and he is drawing a salary of Rs

10,000/- per month.


Name of the Trainee: DASARI SIMHAGIRI RAO

Father’s Name: RAMA RAO

Address:H.NO;-J.K GUMUDA (VI), VANGARA(M)

SRIKAKULAM(DIST),


FAMILY BACKGROUND:

Mr: DASARI SIMHAGIRI RAO, belongs to a backward middle class family from rural area. He resides in a very small village

in , , J.K GUMUDA. He underwent ELECTRONICS & PC HARD WARE 3months in NSIC-Technical Services Centre,


Industries.


PRESENT STATUS:

Presently Mr. : DASARI SIMHAGIRI RAO is working as a Technician in M/s. NSFC LTD and he is drawing a salary of Rs

10,000/- per month.


Name of the Trainee: K. SRI THULASI

Father’s Name: K.KOTAIAH

Address: H.NO;-42-286/9 D, PLOT NO:66,

NEW MARUTHI NAGAR,MOULALI,A.S RAO NAGAR,HYD..


FAMILY BACKGROUND:

Ms. K. SRI THULASI, belongs to a backward middle class family from an urban area She resides in hyderabadcurently.. She

underwent MAINTENANCE &REPAIR AIR OF ELECTRONIC OFFICE AUTOMATION 2 months in NSIC-Technical

Services Centre, Hyderabad. During her training period she gained good practical knowledge/Skill as per the requirement of

Electronics Industries.

After successful completion of her course she got placed in M/s. GEENI COMPUTER CENTER,A.S RAO,HYD. Telangana,


PRESENT STATUS:

Presently Ms. K. SRI THULASI is working as a Technician in M/s. GEENI COMPUTER CENTER.and she is drawing a salary

of Rs 8000/- per month.


Name of the Trainee: N. SANJEEVA

Father’s Name: N. RAMULU

Address:H.NO;-1-108/2/4/A, STREET NO-3,

BHAVANI NAGAR, NACHARAM,

HYD.

FAMILY BACKGROUND:

Mr. N. SANJEEVA, belongs to a backward middle class family from urban area He resides in hyderabadcurently.. He



After successful completion of his course he got placed in M/s.,salf . employ he is own hard ware shop.

PRESENT STATUS:

Presently Mr. N. SANJEEVA is working as a Technician in M/s. own hard ware shop.

and he is drawing a salary of Rs 15,000/- per month.


Name of the Trainee: MEKALA SEKHARU

Father’s Name: M. CHINNA MADDULETI

Address:H.NO;-ALLI NAGARAM (VI), ANUGONDA, KODUMUR(M)

KARNOOL(DIST),


FAMILY BACKGROUND:

Mr: MEKALA SEKHARU RAO, belongs to a backward middle class family from rural area. He resides in a very small village

in , , ALLI NAGARAM. He underwent DOMESTIC ELECTRICAL APPLIANCES 2months in NSIC-Technical Services

Centre, Hyderabad. During his training period he gained good practical knowledge/Skill as per the requirement of Electronics

Industries.

After successful completion of his course he got placed in M/s.,SRI SAI RAM MARKATING, IN OWN SHOP, A.P.

PRESENT STATUS:

Presently Mr. : MEKALA SEKHARU is working as a Technician in M/s. SRI SAI RAM MARKATING, IN OWN SHOP and

he is drawing a salary of Rs 10,000/- per month.


Name of the Trainee: K SRILAXMI

Address: HOMETOWN : VIJAYAWADA,


FAMILY BACKGROUND:

Ms. SRIVANI, belongs to a backward middle class family from rural area. She resides in a very small village in

KOTHAPALLI. She underwent Diploma Industrial Training 6 months in NSIC-Technical Services Centre, Hyderabad.


After successful completion of her course she got placed in M/s. WORKING AT GLOBAL TECHNO SOLUTIONS KUKATPALLY

HYD. Telangana, through Job Mela organized by NSIC-TSC, Hyderabad.

PRESENT STATUS:

Presently Ms. SRIVANI is working as a Technician in M/s. WORKING AT GLOBAL TECHNO SOLUTIONS and she is drawing a



Name of the Trainee: N.ANIL kUMAR

Address: 16/10-306,

LB NAGAR

GODAVARIKHANI,

RAMAGUNDAM

PEDDAPALLI

TELANGANA

505209


FAMILY BACKGROUND:

Mr. N.ANIL kUMAR, belongs to a backward middle class family from rural area. He resides in a very small village in





PRESENT STATUS:

Presently Mr. N.ANIL kUMAR is working as a Technician in M/s. MEDHA SERVO DRIVES and he is drawing a salary of Rs

10,000/- per month.


Name of the Trainee: SUBBA RAO YERRA

Father’s Name: Y.N RAO

Address:H.NO;-2-37/4, STREET 3, KAKATEEYA NAGAR, JOHNSON

GRAMMER SCHOOL, HABSIGUDA, SEC-BAD..


FAMILY BACKGROUND:

Mr. SUBBA RAO YERRA, belongs to a backward middle class family from urban area He resides in hyderabadcurently.. He

underwent ELECTRONIC CAD 3months in NSIC-Technical Services Centre, Hyderabad. During his training period he

gained good practical knowledge/Skill as per the requirement of Electronics Industries.

After successful completion of his course he got placed in M/s. BITRA GROUP PVT.LTD. BANJARAHILLS., HYD,

Telangana, through Job Mela organized by NSIC-TSC, Hyderabad

PRESENT STATUS:

Presently Mr. SUBBA RAO YERRA is working as a Technician in M/s BITRA GROUP PVT.LTD and he is drawing a salary



Name of the Trainee: SAMBA SIVA RAO BANDLA

Father’s Name: KOTA VENKATA SUBBARAO

Address:H.NO;-LIG-A-77, HMTV LINE, OPPOSITE VERTEX PLAZA.

A.S RAO NAGAR,HYD.


FAMILY BACKGROUND:

Mr. SUBBA RAO YERRA, belongs to a backward middle class family from urban area He resides in hyderabadcurently.. He

underwent ELECTRONICS TESTING AND ASSEMBLY OPERATOR 3months in NSIC-Technical Services Centre,


Industries.

After successful completion of his course he got placed in M/s. HDFC BANK PVT.LTD. RADHIKA A.S RAO., HYD,


PRESENT STATUS:

Presently Mr. SAMBA SIVA RAO BANDLA is working as a Technician in M/s HDFC BANK PVT.LTD and he is drawing a



Name of the Trainee: P. KASHI VISHWANATHAM

Father’s Name: LAXMI NARAYANA

Address:H.NO:-5-84, M.S REDDY(V) NARAPALLY, (MGHATKESAR

R.R (DIST).


FAMILY BACKGROUND:

Mr. P. KASHI VISHWANATHAM, belongs to a backward middle class family from rural area. He resides in a very small

village in NARAPALLY. He underwent Industrial Training 6 months in NSIC-Technical Services Centre, Hyderabad. During


After successful completion of his course he got placed in M/s. ASTRA MICROWAVE PRODUCTS LTD.KONDAPUR

HITECH CITY, HYD, Telangana, through Job Mela organized by NSIC-TSC, Hyderabad.

PRESENT STATUS:

Presently Mr. P. KASHI VISHWANATHAM is working as a Technician in M/s. ASTRA MICROWAVE, PRODUCTS LTD

and he is drawing a salary of Rs 10000/- per month.


Name of the Trainee: RAGALA NARESH

Father’s Name: R. VENKATRAO

Address:H.NO:-2-38, NARAPALLY(V), GHATKESAR(M),R.R DIST.


FAMILY BACKGROUND:

Mr RAGALA NARESH, belongs to a backward middle class family from rural area. He resides in a very small village in

NARAPALLY. He underwent Industrial Training 6 months in NSIC-Technical Services Centre, Hyderabad. During his




PRESENT STATUS:

Presently Mr. RAGALA NARESH is working as a Technician in M/s. MEDHA SERVO DRIVES and he is drawing a salary



Name of the Trainee: A.BALAKISHAN

Father’s Name: A. VENKATESHAM

Address:H.NO;-30-266/50, G3, OLD SAFILGUDA,.

,HYD.


FAMILY BACKGROUND:

Mr. A.BALAKISHAN, belongs to a backward middle class family from urban area He resides in hyderabadcurently.. He



After successful completion of his course he got placed in M/s. OWN PC HARD WARE SHOP. RADHIKA A.S RAO., HYD,


PRESENT STATUS:

Presently Mr. A.BALAKISHAN is working as a Technician in M/s OWN PC HARD WARE SHOP and he is drawing a salary



Name of the Trainee: V, GOUTHAM

Father’s Name: V. SHANKARAIAH

Address:H.NO;-MODI APRTMENTSILVASOKA,.

,HYD.


FAMILY BACKGROUND:

Mr. V, GOUTHAM, belongs to a backward middle class family from urban area He resides in hyderabadcurently.. He





PRESENT STATUS:

Presently Mr. V, GOUTHAM is working as a Technician in M/s MEDHA SERVO DRIVES and he is drawing a salary of Rs

10,000/- per month.


Name of the Trainee: P. DEEPTHI

Father’s Name: P. KAMESWARA RAO

Address: H.NO:11/5, SHIVA ARUN COLONY, WEST MAREDPALLEY


FAMILY BACKGROUND:

Ms. P. DEEPTHI, belongs to a backward middle class family from an urban area She resides in Hyderabad currently.. She

underwent Diploma Industrial Training 6 months in NSIC-Technical Services Centre, Hyderabad. During her training period

she gained good practical knowledge/Skill as per the requirement of Electronics Industries.

After successful completion of her course she got placed in M/s. INFOSYS COMPANY, UPPAL,HYD., Telangana, through

Job Mela organized by NSIC-TSC, Hyderabad.

PRESENT STATUS:

Presently Ms. P. DEEPTHI is working as a Technician in M/s. INFOSYS COMPANY.and she is drawing a salary of Rs

10000/- per month.


Name of the Trainee: NIJOE JOSE

Father’s Name: JOSEKP

Address:H.NO;-FT-103BK-1ICRISAT ENCLAVE,

ANAND BAGH, MALKAJGIRI,.

,HYD.


FAMILY BACKGROUND:

Mr. NIJOE JOSE, belongs to a backward middle class family from urban area He resides in hyderabadcurently.. He underwent

ELECTRONICS & PC HARD WARE 6months in NSIC-Technical Services Centre, Hyderabad. During his training period

he gained good practical knowledge/Skill as per the requirement of Electronics Industries.

After successful completion of his course he got placed in M/s. NSIC P CHARD WARE LAB ASSISTANT

KAMALANAGAR, ECIL., HYD, Telangana, through Job Mela organized by NSIC-TSC, Hyderabad

PRESENT STATUS:

Presently Mr. NIJOE JOSE is working as a Technician in M/s NSIC P CHARD WARE LAB ASSISTANT and he is drawing a



Name of the Trainee: NAKKA SUNEETA

Father’s Name: N. KRISHNA MURTHY

Address: H.NO:-11-12/25, PLOT.NO44, VENKAT REDDY COLONY,

NAGARAM, HYD.


FAMILY BACKGROUND:

Ms. NAKKA SUNEETA, belongs to a backward middle class family from an urban area She resides in Hyderabad currently..

She underwent ELECTRONIC-CAD 2 months in NSIC-Technical Services Centre, Hyderabad. During her training period she

gained good practical knowledge/Skill as per the requirement of Electronics Industries.

After successful completion of her course she got placed in M/s. ELECTRONICS CORPORATION OF INDIA LIMITED.

ECIL, Secunderabad, Telangana, through Job Mela organized by NSIC-TSC, Hyderabad.

PRESENT STATUS:

Presently Ms. NAKKA SUNEETA is working as a Technician in M/s. ELECTRONICS CORPORATION OF INDIA

LIMITED.and she is drawing a salary of Rs 10000/- per month.


Name of the Trainee: B. NARESH

Father’s Name: B. KANAKAIAH

Address: H.NO:1-1-29/10/138, BHAGATH NAGAR, JAMMIGADDA,KAPRA,

ECIL,HYD.


FAMILY BACKGROUND:

Mr. B. NARESH, belongs to a backward middle class family from urban area He resides in hyderabadcurently.. He underwent





PRESENT STATUS:

Presently Mr. B. NARESH is working as a Technician in M/s. ECIL LTD, and he is drawing a salary of Rs 10000/- per month.


Name of the Trainee: G. SAGAR

Father’s Name: G. JANARDHAN

Address: H.NO:1-1-29/10/86, BHAGATH NAGAR, JAMMIGADDA,KAPRA,

ECIL,HYD.


FAMILY BACKGROUND:

Mr. G. SAGAR, belongs to a backward middle class family from urban area He resides in hyderabadcurently.. He underwent





PRESENT STATUS:

Presently Mr. G. SAGAR is working as a Technician in M/s. ECIL LTD, and he is drawing a salary of Rs 10000/- per month.

Date post:	02-Aug-2020
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

HYDERABAD - NSIC · Industrial Automation in NSIC-TSC during the period from 26/07/2016 to...

Documents