Hydraulic BreakersAttachments
Break Anything... Except the Bank
VISION2020
KOMACKomac currently has constructed about 65 dealer networks all over the world and we are movingforward for Vision 2020 based on endless passion for technology and the spirit of familism.
We will serve domestic and international customers with the world best function, quality, andservice which are recognized in overseas market.
In the future, we will have a chance to take a leap trying to become an integrated heavy industrybeyond the attachment industry.
KOMAC FAMILISM- Customer like my body- Products like my parents- Supplier like my children- Staff like my brothers
CE Certificate Certificate of D-U-N-S number Homologation Certificate ISO 9001 AEM Member
02
We, KOMAC, have adopted the strict Quality Assurance System, which is essentialfor customer satisfaction
ISO certification, CE, TUV mark and other intellectual property rights enable us tobe one of the best breaker manufacturers in the world.
Structure of Breaker
1
63
52
4
87
Back Head
Installed the oil connections (input /output) and the gas valve- Maximized energyThe nitrogen gas in the back head is compressed once the piston movesupward by the oil pressure and accumulation of the energy, which isconverted into the blow energy effectively as the piston descends.- Auto-greasing SystemThe Auto-greasing system provides working efficiency as well asenhancing breaker durability.- Underwater systemRemote location of air-check valve from the impact point prevents dustinflux into the breaker. The underwater operation is available with unique device installation even in the deep water. Combination with Auto-grease device offersimproved efficiency.
1
Valve System
Easy to access of the external control valve.- Structural SafetyThe Safety increases efficiency and protection in housing and the valveprovides smooth operations and controls functions of the piston.- Cylinder RegulatorThe regulator increases working efficiency with regulating the breaker powerand the number of impacts by controlling moving distance of the piston. - Valve RegulatorThe Valve controls the oil flow and the rated pressure in the breaker.
2
Accumulator
The accumulator is composed of a rubber film, is compressed bythe nitrogen gas in the upper part and is connected with thecylinder at the blow part.- Shock Absorption SystemThe Shock absorption system enhances equipment durability in the impactand increases efficiency with oil supplements.
3
Cylinder
The minimum hydraulic system enables the breaker to maximizeefficiency for reciprocation of the piston where high and low tension circulates.- Cylinder Stability The cylinder is manufactured by a precision machinery with the appropriatequality assurance, offering quality satisfaction.
4
Piston
The piston is installed in the cylinder, which converts the oilpressure into the impact power to break rocks.- DurabilityQuality proven materials in intensity, anti-wear, heat resistance, tenacity,anti-impact, internal pressure lengthen the life of piston.- Post ManagementThe appropriate quality assurance system offers quality satisfaction.
5
Through Bolt
The 4 units of the bolts firmly fix the important components ontothe breaker.
6
Front head
The front head supports the breaker and assembly with the bush,buffering shocks from the chisel.
7
Chisel
The Heat-treated tool for breaking rocks.- Moil PointSuitable for most of demolition, road construction, pier work as well as civil engineering.- Chisel ( Wedge Point )Suitable for most of demolition, concrete cutting as well as tunnel construction.- BluntSuitable for mine as well as a quarry.
8
03
TOR series
Selections of TOR Series
S-Type
Explanation for Model
Blank firing protection system control valve (On/Off)
Built in auto-greasing system to enhance the durability of breaker
Swivel valve Application to prevent the damage of the existing hose
Nonstop pin type to prevent tool pin.
Improved durability
TOR 1S0.5 ~ 1.5
1,102 ~ 3,30778
171.91250110
15 ~ 2590 ~ 130
1,305 ~ 1,88590 ~ 120
1,305~ 1,740750 ~ 1,200
401.57450
17.7217
166.6○
TOR 2S0.8 ~ 3
1,764 ~ 6,614130
286.5260132
20 ~ 35150
2,17690 ~ 120
1,305~ 1,740600 ~ 1,000
461.81500
19.6927
264.6○
TOR 3S1.2 ~ 4
2,646 ~ 8,818155
341.6277170
25 ~ 40150
2,17690 ~ 120
1,305 ~ 1,740550 ~ 950
532.09580
22.8337
362.6○
TOR 5S3.0~ 5.0
6,600~ 11,000240
528.96165364
30 ~ 50160
2,321100 ~ 130
1,450 ~ 1,885550 ~ 950
582.28600
23.6252
509.6○
TOR 6S3.5 ~ 7.0
7,700 ~ 15,400330
727.32178392
40 ~ 70170
2,466110 ~ 140
1,595 ~ 2,030500 ~ 900
682.68690
27.1778
764.4○
TOR 7S5.0 ~ 9.0
11,000 ~ 19,800355
782.42188414
45 ~ 90170
2,466110 ~ 140
1,595 ~ 2,030400 ~ 850
752.95750
29.5395931○
TOR 7.0 ~
15,400 ~47
1,042862
55 ~19
2,8130 ~
1,885 ~400 ~
83.380
31.15
1,4○
Unittonlbskg
lbskg
lbsl/min
barpsibarpsi
bpmmminchmminch
kg f-mjoule
Item / Model
*Operating Weight( Mount Cap+TOOL )
Selection of Machine
Weight of Main Body
Setting Pressure( of Machine )
Operating pressure( of Breaker / Hammer )
Required Oil Flow Rate
Impact Rate
Rod/Chisel
Impact energy
Auto-Grease System
Dia.
Length
General
Specification
Auto-Greasing System (V type Option)
- Increase breaker durability- Advance efficiency- Grease easily
Swivel Valve Application (S-type Only)
- Prevent the damage of the existing hose
04
TOR 8S7.0 ~ 14
15,400 ~ 30,800475
1,046.9284626
55 ~100195
2,828130 ~ 160
1,885 ~ 2,320400 ~ 800
853.35800
31.50150
1,470○
TOR 10S12~ 16
26,400 ~ 35,200800
1,763.2430948
80 ~ 120210
3,046150 ~ 170
2,176 ~ 2,466450 ~ 700
1003.941,00039.37265
2,599○
TOR 13S12 ~ 16
26,400 ~ 35,200 950
2,094.39460
1,014.1380 ~ 120
1952,828.16150 ~ 170
2,176 ~ 2,466450 ~ 700
1024.021,00039.37265
2,599○
TOR 18S17 ~ 23
37,479 ~ 50,7061,250
2,755.78620
1,366.8790 ~ 125
2002,900.68160 ~ 180
2,320 ~ 2,610360 ~ 700
1084.251,10043.31420
4,119○
TOR 23S18 ~ 26
39,683 ~ 57,3201,550
3,417.16710
1,565.28125 ~ 150
2103,046
160 ~ 1802,320 ~ 2,610
400 ~ 8001275.001,20047.24490
4,805○
TOR 26S20 ~ 30
44,092 ~ 66,1381,9504,299820
1,087150~ 180
2303,336
160 ~ 1802,320 ~ 2,610
240 ~ 6001405.511,20047.24620
6,080○
TOR 36S27 ~ 35
59,525 ~ 77,1622,150
4,739.94920
2,028.25160 ~ 190
2303,336
160 ~ 1802,320 ~ 2,610
360 ~ 7001455.711,30051.18758
7,433○
TOR 42S34 ~ 47
74,957 ~ 103,6173,210
7,076.841,320
2,910.10190 ~ 250
2403,480.81160 ~ 180
2,320 ~ 2,610240 ~ 500
1556.101,50059.061,07210,513○
TOR 55S47 ~ 70
103,617 ~ 154,3244,150
9,149.181,880
4,144.69210 ~ 310
2403,480.81160 ~ 190
2,320 ~ 2,756210 ~ 450
1756.891,65064.961,31012,847○
TOR 70S65~85
143,300 ~187,3926,20013,6682,8006,173
300 ~ 400240
3,480.81180~210
2,610 ~ 3,046180 ~ 350
1957.671,80070.861,70016,671○
Above specifications are subject to change without prior notice for quality improvement.
05
TOR series
Selections of TOR Series
V-Type
Explanation for Model
Blank firing protection system control valve (On/Off)
With auto-greasing system (V5 Type)
Simple design structure, easy maintenance
Improved durability
Blank Firing Protection System- Protect the parts
(tool pins, through bolts and other parts)- Lengthen the breaker life
Under Water System- Remote location of the air-check valve
in the top side from the impact point- Prevent dust influx into the breaker- Operate with our unique device in the
deep water
KOMAC launched the world’s first Auto GreaseDevice for “V”(Open) type. Designed to perfectlymount the device on the Valve HousingAssembly with a protecting cover Acquired aninternational patent by attaching the auto-greasing device on the”V”type
- Enhanced Productivity by not requiring Greasework manually
- Improved Durability of Tool Bush and ThrustBush by using the device on the”V”type
TOR 1V0.5 ~ 1.5
1,102 ~ 3,30770
154.2850110
15 ~ 2590 ~ 130
1,305 ~ 1,88590 ~ 120
1,305~ 1,740750 ~ 1,200
401.57450
17.7217
166.6─
TOR 2V0.8 ~ 3
1,764 ~ 6,614108
238.03260132
20 ~ 35150
2,17690 ~ 120
1,305~ 1,740600 ~ 1,000
461.81500
19.6927
264.6─
TOR 3V1.2 ~ 4.0
2,646 ~ 8,818145
319.5877170
25 ~ 40150
2,17690 ~ 120
1,305 ~ 1,740550 ~ 950
532.09580
22.8337
362.6─
TOR 5V3.0~ 5.0
6,600~ 11,000215
473.86165364
30 ~ 50160
2,321100 ~ 130
1,450 ~ 1,885550 ~ 950
582.28600
23.6252
509.6─
TOR 6V3.5 ~ 7.0
7,700 ~ 15,400315
694.26178392
40 ~ 70170
2,466110 ~ 140
1,595 ~ 2,030500 ~ 900
682.68690
27.1778
764.4─
TOR 7V5.0 ~ 9.0
11,000 ~ 19,800370
815.48188414
45 ~ 90170
2,466110 ~ 140
1,595 ~ 2,030400 ~ 850
752.95750
29.5395931─
Unittonlbskg
lbskg
lbsl/min
barpsibarpsi
bpmmminchmminch
kg f-mjoule
Item / Model
*Operating Weight( Mount Cap+TOOL )
Selection of Machine
Weight of Main Body
Setting Pressure( of Machine )
Operating pressure( of Breaker / Hammer )
Required Oil Flow Rate
Impact Rate
Rod/Chisel
Impact energy
Auto-Grease System
Dia.
Length
General
Specification
06
TOR 8V7.0 ~ 14
15,400 ~ 30,800480
1,057.92284626
55 ~100195
2,828130 ~ 160
1,885 ~ 2,320400 ~ 800
853.35800
31.50150
1,470─
TOR 10V12~ 16
26,400 ~ 35,200820
1,807.28430948
80 ~ 120210
3,046150 ~ 170
2,176 ~ 2,466450 ~ 700
1003.941,00039.37265
2,599─
TOR 13V12~ 16
26,400 ~ 35,2001,100
2,425.08460
1,014.1380 ~ 120
1952,828.16150 ~ 170
2,176 ~ 2,466450 ~ 700
1024.021,00039.37265
2,599─
TOR 18V17 ~ 23
37,479 ~ 50,7061,320
2,910.10610
1,344.8290 ~ 125
2002,900.68160 ~ 180
2,320 ~ 2,610360 ~ 700
1084.251,10043.31420
4,119─
TOR 23V18 ~ 26
39,683 ~ 57,3201,630
3,593.53700
1,543.24125 ~ 150
2103,045.71160 ~ 180
2,320 ~ 2,610400 ~ 800
1275.001,20047.24490
4,805─
TOR 26V20 ~ 30
44,092 ~ 66,1381,8504,077800
1,763150~ 180
2303,336
160 ~ 1802,320 ~ 2,610
240 ~ 6001405.511,20047.24620
6,080─
TOR 36V27 ~ 35
59,525 ~ 77,1622,200
4,850.17910
2,006.21160 ~ 190
2303,336
160 ~ 1802,320 ~ 2,610
360 ~ 7001455.711,30051.18758
7,433─
TOR 42V34 ~ 47
74,957 ~ 103,6173,310
7,297.301,320
2,910.10190 ~ 250
2403,480.81160 ~ 180
2,320 ~ 2,610240 ~ 500
1556.101,50059.061,07210,513─
TOR 55V47 ~ 70
103,617 ~ 154,3244,380
9,656.241,880
4,144.69210 ~ 310
2403,480.81160 ~ 190
2,320 ~ 2,756210 ~ 450
1756.891,65064.961,31012,847─
TOR 70V65 ~ 85
143,300 ~ 187,3926,52014,3742,8306,239
300 ~ 400240
3,480.81180 ~ 210
2,610 ~ 3,046180 ~ 350
1957.671,80070.861,70016,671─
Above specifications are subject to change without prior notice for quality improvement.
07
TOR series
Selections of TOR Series
H-Type
Explanation for Model
Blank firing protection system control valve (On/Off)
Improved durability
Simple design structure, easy maintenance
Valve and the Cylinder Adjusterin the front panel- Easy for the oil flow adjustment as
well as customer maintenance
Shock Absorbing Systemin the Accumulator- Enhance the equipment durability by
shock buffering in the impact- Increase efficiency with the oil
Supplement
08
TOR 1H0.5 ~ 1.5
1,102 ~ 3,30778
171.91250110
15 ~ 2590 ~ 130
1,305 ~ 1,88590 ~ 120
1,305~ 1,740750 ~ 1,200
401.57450
17.7217
166.6─
TOR 2H0.8 ~ 3.0
1,764 ~ 6,614130
286.5260132
20 ~ 35150
2,17690 ~ 120
1,305~ 1,740600 ~ 1,000
461.81500
19.6927
264.6─
TOR 3H1.2 ~ 4.0
2,646 ~ 8,818155
341.6277170
25 ~ 40150
2,17690 ~ 120
1,305 ~ 1,740550 ~ 950
532.09580
22.8337
362.6─
TOR 5H3.0~ 5.0
6,600~ 11,000240
528.96165364
30 ~ 50160
2,321100 ~ 130
1,450 ~ 1,885550 ~ 950
582.28600
23.6252
509.6─
TOR 6H3.5 ~ 7.0
7,700 ~ 15,400330
727.32178392
40 ~ 70170
2,466110 ~ 140
1,595 ~ 2,030500 ~ 900
682.68690
27.1778
764.4─
TOR 7H5.0 ~ 9.0
11,000 ~ 19,800355
782.42188414
45 ~ 90170
2,466110 ~ 140
1,595 ~ 2,030400 ~ 850
752.95750
29.5395931─
Unittonlbskg
lbskg
lbsl/min
barpsibarpsi
bpmmminchmminch
kg f-mjoule
Item / Model
*Operating Weight( Mount Cap+TOOL )
Selection of Machine
Weight of Main Body
Setting Pressure( of Machine )
Operating pressure( of Breaker / Hammer )
Required Oil Flow Rate
Impact Rate
Rod/Chisel
Impact energy
Auto-Grease System
Dia.
Length
General
Specification
09
TOR 8H7.0 ~ 14
15,400 ~ 30,800475
1,046.9284626
55 ~100195
2,828130 ~ 160
1,885 ~ 2,320400 ~ 800
853.35800
31.50150
1,470─
TOR 10H12~ 16
26,400 ~ 35,200800
1,763.2430948
80 ~ 120210
3,046150 ~ 170
2,176 ~ 2,466450 ~ 700
1003.941,00039.37265
2,599─
TOR 13H12 ~ 16
26,400 ~ 35,2001,0002,204460
1,014.1380 ~ 120
1952,828
150 ~ 1702,176 ~ 2,466
450 ~ 7001024.021,00039.37265
2,599─
TOR 18H17 ~ 23
37,479 ~ 50,7061,150
2,535.32610
1,344.8290 ~ 125
2002,900.68160 ~ 180
2,320 ~ 2,610360 ~ 700
1084.251,10043.31420
4,119─
TOR 23H18 ~ 26
39,683 ~ 57,3201,5003,306700
1,543.24125 ~ 150
2103,046
160 ~ 1802,320 ~ 2,610
400 ~ 8001275.001,20047.24490
4,805─
TOR 26H20 ~ 30
44,092 ~ 66,1381,650
3,636.6800
1,763150 ~ 180
2303,336
160 ~ 1802,320 ~ 2,610
240 ~ 6001405.511,20047.24620
6,080─
TOR 36H27~ 35
59,525 ~ 77,1622,100
4,628.4910
2,006.21160 ~ 190
2303,336
160 ~ 1802,320 ~ 2,610
360 ~ 7001455.711,30051.18758
7,433─
TOR 42H34 ~ 47
74,957 ~ 103,6172,980
6,569.771,320
2,910.10190 ~ 250
2403,480.81160 ~ 180
2,320 ~ 2,610240 ~ 500
1556.101,50059.061,07210,513─
TOR 55H47 ~ 70
103,617 ~ 154,3244,200
9,259.411,880
4,144.69210 ~ 310
2403,480.81160 ~ 190
2,320 ~ 2,756210 ~ 450
1756.891,65064.961,31012,847─
TOR 70H65 ~ 85
143,300 ~ 187,3926,420
14,153.682,8306,239
300 ~ 400240
3,480.81180 ~ 210
2,610 ~ 3,046180 ~ 350
1957.671,80070.861,70016,671─
Above specifications are subject to change without prior notice for quality improvement.
KB series
Selections of KB Series
S-Type
Explanation for Model
S : Silence type for Excavator
KB 100S0.5 ~ 1.5
1,102 ~ 3,3078017650110
15 ~ 2590 ~ 130
1,305 ~ 1,88590 ~ 120
1,305~ 1,740750 ~ 1,200
401.57450
17.7216157
KB 150S0.8 ~ 3.0
1,764 ~ 6,61413429560132
20 ~ 35150
2,17690 ~ 120
1,305~ 1,740600 ~ 1,000
461.81500
19.6925245
KB 200S1.2 ~ 4.0
2,646 ~ 8,81815834877170
25 ~ 40150
2,17690 ~ 120
1,305 ~ 1,740550 ~ 950
532.09580
22.8335343
KB 250S3.0 ~ 5.0
6,600~ 11,000245540165364
30 ~ 50160
2,321100 ~ 130
1,450 ~ 1,885550 ~ 950
582.28600
23.6250490
KB 300S3.5~7.0
7,700 ~ 15,400346763178392
40 ~ 70170
2,466110 ~ 140
1,595 ~ 2,030500 ~900
682.68690
27.1775735
KB 350S5.0 ~ 9.0
11,000 ~ 19,800375827188414
45 ~ 90170
2,466110 ~ 140
1,595 ~ 2,030400 ~ 850
752.95750
29.5390883
KB 400S7.0 ~ 14
15,400 ~ 30,800498
1,098284626
55 ~ 100195
2,828130 ~ 160
1,885 ~ 2,320400 ~ 800
853.35800
31.50140
1,373
KB 1000S12 ~ 16
26,400 ~ 35,200845
1,863430948
80 ~ 120210
3,046150 ~ 170
2,176 ~ 2,466450 ~ 700
1003.941,00039.37265
2,599
KB 1500S13 ~ 18
28,660 ~ 39,6831,2102,668500
1,10290 ~ 120
2103,046
150 ~ 1702,176 ~ 2,466
400 ~ 9001204.721,10043.31280
2,746
KB 2000S18 ~ 26
39,683 ~ 57,3201,7003,748710
1,565125 ~ 150
2103,046
160 ~ 1802,320 ~ 2,610
400 ~ 8001355.311,20047.24430
4,217
KB 3600S27 ~ 35
59,525 ~ 77,1622,1004,630930
2,050160 ~ 190
2303,336
160 ~ 1802,320 ~ 2,610
360 ~ 7001505.911,30051.18625
6,129
KB 4200S34 ~ 47
74,957 ~ 103,6172,8566,2961,2902,844
190 ~ 250240
3,481170 ~ 190
2,466 ~ 2,756240 ~ 500
1556.101,50059.061,04010,199
Unittonlbskg
lbskg
lbsl/min
barpsibarpsi
bpmmminchmminch
kg f-mjoule
Item / Model
*Operating Weight( Mount Cap+TOOL )
Selection of Machine
Weight of Main Body
Setting Pressure( of Machine )
Operating pressure( of Breaker / Hammer )
Required Oil Flow Rate
Impact Rate
Rod/Chisel
Impact EnergyClass
Dia.
Length
General
Above specifications are subject to change without prior notice for quality improvement.
Specification
● Applicable for the full range of earthmovers
● Adjustable blow speed to improve efficiency
● Oil flow adjustable to the wide range of carriers
● Better working convenience in small places
● Replaceable tool bushing
● Simple and efficient design
● Easier and faster maintenance
● Certified with Europe CE standard
10
Explanation for Model
V : Vertical type for Excavator
KB 100V0.5 ~ 1.5
1,102 ~ 3,3077215950110
15 ~ 2590 ~ 130
1,305 ~ 1,88590 ~ 120
1,305~ 1,740750 ~ 1,200
401.57450
17.7216157
KB 150V0.8 ~ 3.0
1,764 ~ 6,61411224760132
20 ~ 35150
2,17690 ~ 120
1,305~ 1,740600 ~ 1,000
461.81500
19.6925245
KB 200V1.2 ~ 4.0
2,646 ~ 8,81815033177170
25 ~ 40150
2,17690 ~ 120
1,305 ~ 1,740550 ~ 950
532.09580
22.8335343
KB 250V3.0~ 5.0
6,600~ 11,000220485165364
30 ~ 50160
2,321100 ~ 130
1,450 ~ 1,885550 ~ 950
582.28600
23.6250490
KB 300V3.5~7.0
7,700 ~ 15,400330728178392
40 ~ 70170
2,466110 ~ 140
1,595 ~ 2,030500 ~ 900
682.68690
27.1775735
KB 350V5.0 ~ 9.0
11,000 ~ 19,800388855188414
45 ~ 90170
2,466110 ~ 140
1,595 ~ 2,030400 ~ 850
752.95750
29.5390883
KB 400V7.0 ~ 14
15,400 ~ 30,800505
1,113284626
55~100195
2,828130 ~ 160
1,885 ~ 2,320400 ~ 800
853.35800
31.50140
1,373
KB 1000V12~ 16
26,400 ~ 35,200865
1,907430948
80 ~ 120210
3,046150 ~ 170
2,176 ~ 2,466450 ~ 700
1003.941,00039.37265
2,599
KB 1500V13 ~ 18
28,660 ~ 39,6831,3252,921500
1,10290 ~ 120
2103,046
150 ~ 1702,176 ~ 2,466
400 ~ 9001204.721,10043.31280
2,746
KB 2000V18 ~ 26
39,683 ~ 57,3201,7203,792710
1,565125 ~ 150
2103,046
160 ~ 1802,320 ~ 2,610
400 ~ 8001355.311,20047.24430
4,217
KB 3600V27 ~ 35
59,525 ~ 77,1622,3005,071930
2,050160 ~ 190
2303,336
160 ~ 1802,320 ~ 2,610
360 ~ 7001505.911,30051.18625
6,129
KB 4200V34 ~ 47
74,957 ~ 103,6173,1506,9451,2902,844
190 ~ 250240
3,481170 ~ 190
2,466 ~ 2,756240 ~ 500
1556.101,50059.061,04010,199
Unittonlbskg
lbskg
lbsl/min
barpsibarpsi
bpmmminchmminch
kg f-mjoule
Item / Model
*Operating Weight( Mount Cap+TOOL )
Selection of Machine
Weight of Main Body
Setting Pressure( of Machine )
Operating pressure( of Breaker / Hammer )
Required Oil Flow Rate
Impact Rate
Rod/Chisel
Impact EnergyClass
Dia.
Length
General
Above specifications are subject to change without prior notice for quality improvement.
Specification
Selections of KB Series
V-Type
● Applicable for the full range of earthmovers
● Adjustable blow speed to improve efficiency
● Oil flow adjustable to the wide range of carriers
● Better working convenience in small places
● Replaceable tool bushing
● Simple and efficient design
● Easier and faster maintenance
● Certified with Europe CE standard
11
KB series
Selections of KB Series
H-Type
Explanation for Model
H : Horizontal type for Excavator
KB 100H0.5 ~ 1.5
1,102 ~ 3,3078017650110
15 ~ 2590 ~ 130
1,305 ~ 1,88590 ~ 120
1,305~ 1,740750 ~ 1,200
401.57450
17.7216157
KB 150H0.8 ~ 3.0
1,764 ~ 6,61413429560132
20 ~ 35150
2,17690 ~ 120
1,305~ 1,740600 ~ 1,000
461.81500
19.6925245
KB 200H1.2 ~ 4.0
2,646 ~ 8,81815834877170
25 ~ 40150
2,17690 ~ 120
1,305 ~ 1,740550 ~ 950
532.09580
22.8335343
KB 250H3.0~ 5.0
6,600~ 11,000245540165364
30 ~ 50160
2,321100 ~ 130
1,450 ~ 1,885550 ~ 950
582.28600
23.6250490
KB 300H3.5 ~ 7.0
7,700 ~ 15,400346763178392
40 ~ 70170
2,466110 ~ 140
1,595 ~ 2,030500 ~ 900
682.68690
27.1775735
KB 350H5.0 ~ 9.0
11,000 ~ 19,800375827188414
45 ~ 90170
2,466110 ~ 140
1,595 ~ 2,030400 ~ 850
752.95750
29.5390883
KB 400H7.0 ~ 14
15,400 ~ 30,800498
1,098284626
55 ~100195
2,828130 ~ 160
1,885 ~ 2,320400 ~ 800
853.35800
31.50140
1,373
KB 1000H12~ 16
26,400 ~ 35,200845
1,863430948
80 ~ 120210
3,046150 ~ 170
2,176 ~ 2,466450 ~ 700
1003.941,00039.37265
2,599
KB 1500H13 ~ 18
28,660 ~ 39,6831,2102,668500
1,10290 ~ 120
2103,046
150 ~ 1702,176 ~ 2,466
400 ~ 9001204.721,10043.31280
2,746
KB 2000H18 ~ 26
39,683 ~ 57,3201,7003,748710
1,565125 ~ 150
2103,046
160 ~ 1802,320 ~ 2,610
400 ~ 8001355.311,20047.24430
4,217
KB 3600H27 ~ 35
59,525 ~ 77,1622,1004,630930
2,050160 ~ 190
2303,336
160 ~ 1802,320 ~ 2,610
360 ~ 7001505.911,30051.18625
6,129
KB 4200H34 ~ 47
74,957 ~ 103,6172,8566,2961,2902,844
190 ~ 250240
3,481170 ~ 190
2,466 ~ 2,756240 ~ 500
1556.101,50059.061,04010,199
Unittonlbskg
lbskg
lbsl/min
barpsibarpsi
bpmmminchmminch
kg f-mjoule
Item / Model
*Operating Weight( Mount Cap+TOOL )
Selection of Machine
Weight of Main Body
Setting Pressure( of Machine )
Operating pressure( of Breaker / Hammer )
Required Oil Flow Rate
Impact Rate
Rod/Chisel
Impact EnergyClass
Dia.
Length
General
Above specifications are subject to change without prior notice for quality improvement.
Specification
● Applicable for the full range of earthmovers
● Adjustable blow speed to improve efficiency
● Oil flow adjustable to the wide range of carriers
● Better working convenience in small places
● Replaceable tool bushing
● Simple and efficient design
● Easier and faster maintenance
● Certified with Europe CE standard
12
Explanation for ModelSL : Silence type for Skid loader SD : Silence type for Dingo, Ramrod, mini loader SB : Silence type for Backhoe loaderVL : Vertical type for Skid loaderVD : Vertical type for Dingo, Ramrod, mini loaderVB : Vertical type for Backhoe loaderHB : Horizontal type for Backhoe loader
KB 1000.5 ~ 1.5
1,102 ~ 3,30750
110.2313 ~ 25
3.43 ~ 6.6090 ~ 1309 ~ 13
1,305.30 ~ 1,885.4475 ~ 1007.5 ~ 10
1,087.75 ~ 1,450.34800 ~ 1,200
401.57 450
17.7216 157
KB 1500.8 ~ 3.0
1,76 ~ 6,614 60
132.28 20 ~ 30
5.28 ~ 7.93150 15
2,175.5180 ~ 1108 ~ 11
1,160.27 ~ 1,595.37 600 ~ 1,000
46 1.81 500
19.69 25 245
KB 2001.2 ~ 4.0
2,646 ~ 8,818 77
169.76 25 ~ 40
6.60 ~ 10.57150 15
2,175.5190 ~ 1209 ~ 12
1,305.30 ~ 1,740.41550 ~ 950
53 2.09 580
22.83 35 343
KB 2502.5 ~ 4.0
5,512 ~ 8,818165
363.76 30 ~ 50
7.93 ~ 13.21160 16
2,320.54100 ~ 13010 ~ 13
1,450.34 ~ 1,885.44500 ~ 950
582.28 600
23.6250490
KB 3003.0 ~ 5.0
6,614 ~ 11,023 178
392.4230 ~ 45
7.93 ~ 11.89170 17
2,465.5795 ~ 1309.5 ~ 13
1,377.82 ~ 1,885.44500 ~ 900
68 2.68690
27.1775735
KB 3504.0 ~ 9.0
8,818 ~ 19,842188
414.4740 ~ 80
10.57 ~ 21.1317017
2,465.57100 ~ 13010 ~ 13
1,450.34 ~ 1,885.44450 ~ 950
75 2.95750
29.5390883
KB 4006.0 ~ 11.0
13,228 ~ 24,251 284
626.11 45 ~ 85
11.89 ~ 22.45 195 19.5
2,828.16 130 ~ 150 13 ~ 15
1,885.44 ~ 2,175.51 400 ~ 800
853.35800
31.50 140
1,373
Unittonlbskg
lbsl/mingal/min(US)
barMpa
psibar
Mpapsi
bpmmminchmminch
kg f-mjoule
Item / Model
Weight of Main Body
Selection of Machine
Required Oil Flow Rate
Setting Pressure( of Machine )
Operating pressure( of Breaker / Hammer )
Impact Rate
Rod/Chisel
Impact EnergyClass
Dia.
Length
General
Above specifications are subject to change without prior notice for quality improvement.
Specification : Specification below is without type. when you place an order please double check the type.
Selections of KB Series
BackhoeLoader-Type
HB1F / HB1S TYPE :
For Attachment on BackhoeLoader TypeThree Pin Holes which arechangeable if necessary required exact base machinedimension HB1F - fixed type, HB1S - separation type adjusted
by SPACER (like as V type)
13
Backhoe type- Backhoe type is designed for backhoe loader to avoid
a collision when using the arm of backhoe loader.- "According to various angles, there are 3 holes to fix
it properly and to apply to variable standards."- Backhoe type is improved for backhoe loader to meet
customer requirement.
Skid loader type- Applied to the special mounting cap of the exclusive
skid loader.
- Skid loader type is improved for skid loader to operateit easily and to meet customer requirement.
HB2F / HB2S TYPE :
For Attachment on BackhoeLoader Typewhen there is an interferencecaused by three Pin Holes andwhen it can be operated withone Pin Holerequired exact base machinedimension
Applicable Model & Structure
Wider Carrier Range of Komac Hydraulic Breaker(Operating Weight and Average Mounting Group)
BOBCAT
CASE
KB100EXC
0.5~1.5 ton
443, 543, 625, 721,753, 843, 440B,520/530, 542/643,620/700,741/742/743, X 119, X 1201818UNILD, CK08, CK1.3
DX27Z, DX27Z, SOLAR010, SOLAR015
EX 12, EX 15, EX 8,UE 10, UE 15
801
SK07, SK07-2,SK013
PC05, PC05-1 / 5,PC05-5, PC05-6
EC15B
KB150EXC
0.8~3 ton
X 119, X 120, 440B,443, 520/530, 543,542/643, 620/700,741/742/743,721, 753, 625, 753843CK 08, CK 1.3,1835B UNILD, 1830 UNILD, 1818 UNILD
SOLAR010,SOLAR015
UE 10, EX 12, EX 15, UE 15, EX 22,UE 20, EX 30, UE 30
801, 801-5, 803,Robot 150, 801-6
PC05, PC05-1, PC05-5,PC05-6, PC07-2, PC10-3, PC10-5, PC10-6,PC15-2, PC20-2, PC20-3, SK 013, SK 015, SK07, SK015, SK025
SH20JX, SH25JX,SH28J
EC15B,EC14,EC20B
KB200EXC
1.2~4 ton
443, 543, 625, 721, 753,843, 440B, 520/530,542/643,620/700,741/742/743, 853H, X 119, X 120, X 123, X 125, X 220, X 225,X 231, X 320, X 325, X 331CK 08, CK 1.3,1835B UNILD, 1830 UNILD, 1845B UNILD, 1818 UNILD
SOLAR030,SOLAR035,DSL602
EX 1100, EX 12, EX 15, EX 22, EX 25,EX 30, EX 35, EX 8,UE 10, UE 15, UE 20, UE 30, UE 40
HSL 600 (S/K)
801, 802, 1 CX, 801-5, 803, Robot 150, 801-6,ROBOT 150, ROBOT 185
SK015, SK025,SK030, SK035,SK07, SK007-2
PC05, PC05-1, PC05-5,PC05-6, PC05-7, PC07,PC07-2, PC10-3,PC10-5, PC10-6,PC10-7, PC15-2, PC20-2 / 3
SH20JX, SH25JX,SH28J, SH35J,SH35JX-2, S100,LS1000J
EC25, ECR28,ZL302C
KB250EXC
3 ~5 ton
X 231, X 325, X 331
SOLAR030,SOLAR035,
EX 1100, EX 25, EX 30, EX 35
802, 1 CX,ROBOT 185
SK 025, SK 030,SK 035
PC10-6, PC10-7,PC20-6, PC20-7,PC30-6, PC30-7
EC30,EC35,ECR28
KB300EXC
3.5~7 ton
X 231, X 331, X 335
DSL702,DSL802,DX55
EX 1100, EX 35,EX 40, EX 45
802,2 CX, 2 CX 4,ROBOT 185
SK 030, SK 035, SK 045, SK 050
PC20-6, PC20-7,PC30-6, PC30-7,PC40-6, PC45-1
EC45
KB350EXC
5 ~9 ton
X 238, X 335
580 CK"B"/35, 580 CK/33, 680 CK"C"/35, 680 CK"C"/36
307, 414, 426, 428, 438
SOLAR55,DSL902
EX 40, EX 45, EX 60,EX 60-2, EX 60-3,EX 60 HD, EX 60 WD
3 CX 4, 4 CX,2 CX, 2 CX 4, 2 D, 3C, 3 C/D, 3 CX, 3 CX4, 3 D, 3 DB, 4 C,3 DB 4, 3 DS-4, 4 C, JS 70
JD 190 E, JD 410 /9505
SK 045, SK 050, SK 60 III,SK 60 MARK 1
PC40-6, PC45-1,PC60-5, PC60L-5,PC60U-5, PC95, PW 60-5
A308
LS-1600 FJ
EC55,EW50,ECR58,L20B/25B/30B/35B/40B/45B
KB400EXC
7~14 ton
580 CK"B"/35, 680 CK"C"/35, 680 CK"C"/36
307,414,426, 428, 438
SOLAR80
EX 100, EX 100-2,EX 100-3, EX 100WD, EX 60, EX 60-2,EX 60-3, EX 60 HD,EX 60 WD, EX 90,EX 90 WD
3 CX 4, 4 CX, 5 B, 2 D, 3 C, 3 C/D, 3CX, 3 CX 4, 3 D, 3DB, 4 C,3 DB 4, 3 DS-4, 4 C,JS 70
JD 190 E, JD 290 D,JD 410 /9505
SK 100 III, SK 100 MARK 1,SK 60 III,SK 60 MARK 1
PC60-5, PC60L-5,PC60U-5, PC95, PW 60-5, PW 95,PW 95-5
L506 / 507/508/509/512/514
BL74,L50D,612,616B
KB1000EXC
12~16 ton
X 2B, X 20T
35YC, 35YC
205, 206, 211, 212,312, 205 B, 206 B,212 B, M 315, 312,206BFT, 212BFT,312/311
DX140W
EX 100, EX 100 / M-5, EX 100 /WD, EX 100 / WD-1, EX 100 WD,EX 100-2, EX 100-3, EX 100M,EX 120, EX 120 WD, EX 120-1,EX 120-2, EX 120-3, EX 120-5,EX 150, EX 150 / LC, EX 150 WDR 120 W, R 130 LC,R 1300LC(W)-3
JD 290 D, JD 490 E,JD 495 D, JD 590 D,JD555, JD710B
PC 100-2, PC 120-2, PC 120-5, PC 120-6, PC 150-3, PC 150-5, PC 150H-5, PC 150HD-3,PC 180L-5, PC 20 3 , PC 200-5, PC 50, PC 50 5A900, R900,A/R901,R308, A310,A312, A314
LS 2600 FJ2, LS 2600J, LS 2650 AJ, LS 2650 FJ2, LS 2650EJ/S 265E, S 250, S 260/S 40, S 260E, S 260LL,S 260SS, S 265, SH 100LC-2,SH 120-3, SH 135U-2
EC130,EW130,EC140,EW145,EW646,L60E,L70E
KB1500EXC
13~18 ton
35YC
205, 211, 214, 311,312, 315, 317, 205 B, 206BFT, 211 B, 211LC, 212 B, 212BFT, M 315, M318SOLAR170
EX 150, EX 150 LC,EX 150 WD, EX 150-1, EX 160 WD, UH 06D/062, WH 073DR 130 LC, R 1300LC(W)-3
6 B, 7, 806, 807, 812, 814, 6 C, 6(4-Zyld), 6(4-Zyld) CD, 7 B, 805B,805B Turbo, 806B, 806C,JS 130, JS 130W, JS 150,JS 150 W, JS 160
JD 590 D, JD 690 B
SK 150 III, SK 160 IV,SK 150/LC/MK3
PC 120-5, PC 150-1, PC 150-3, PC 150-5, PC 150H-5, PC 150HD-3,PC 150HD-5, PC 180L-5,PC 200-5, PC 50, PC 50 5,PW 130, PW 130-6A/R902, A/R900, R310,R312, A316
EC150,EW150,EW160,L90E
CATERPILLAR
DOOSAN
HITACHI
HYUNDAI
JCB
JOHN-DEERE
KOBELCO
KOMATSU
LIEBHERE
14VOLVO
SUMITOMO
KB2000EXC
18~26 ton
219, 224, 225, 320, 322, 213B, 214 B, 215 D, 219 D, 224 B, 225 A-C, 225 D, 225 B, 320 B-Stiel,320 C-Stiel, 320L, M 318,215, 215 BLC/SA DX210W,DX200LC
EX 200, EX 200-2, EX 200-3, EX200-3 , EX 220, EX 220-2, EX220-3, EX 220-1, EX 200 / LC,UH 073, UH 081 / LC, UH 09, UH103 / LC, UH 081 / LC, UH 083 /LC, UH 09, UH 10R200W-2/200W , R180LC-3,R200LC/210LC, R210LC-3, R 200W-2/200W ,R 2000W/LC, R 180LC-3, R 200LC/210LC, R 210LC-3,R 2200LC-3, R 250LC-3
808, 817, 7B / 7C, 8B, 807B, 807C, 8C /8D, JS 180, JS 200,JS 210, JS 220, JS 240,JS240 / 260
JD 690 D, JD 690 E,JD 790 E, JD 690 B,JD 54
K907D/ DL, K909A / LC, SK 200III, SK 200 LC, SK 200 LC MARKIII, SK 200 MARK 1, SK 200MARK III, SK 200-4, SK 200-LCMK 4, SK 210 IV, SK 220 IIIMARK 1PC 180-3, PC 180-5, PC 200 LC, PC 200 LC 3, PC200 LC 5, PC 200 LC 6, PC200-1, PC 200-2, PC 200-3, PC 200-5, PC 200-6, PC 210-3, PC 210-5A/R904, A/R912, A/R914,A/R921, A/R922,A924, A/R932,R941
LS 2800 FL2, LS 3400AJ / S340,LS 3400EJ / S340E, LS 3400J / S90, LS2800CJ,LS2800DJ / S280, LS-3400 FJ2,S 280 / S70, S 280 E, S 340, S 9211 R, S 9411 R
EC200,EC210,EC230,EC240,EW230
KB3600EXC
27~35 ton
DX300LC,SOLAR300LC
EX 160 HD, EX 300, EX300-2, EX 300-3, EX3500, EX 270 SEE A ,UH 121 / LC, UH 143 /LC, EX 300 / LC, UH 14/ 142R320LC-3, R 290LC, R 290LC-3, R 320LC-3
JS 300
JD 892 E, JD 792,JD 892D
SK 300, SK 300 II MARK 1,SK 300 III MARK 1,SK 330 IV,SK300/LC/MK3
PC250LC-6, PC280-3,PC280-5, PC300, PC300-1,PC300-2, PC300-3, PC300-5,PC300-6, PC300L-5,PC300LC 3 , PC300LC-5,PC300LC-6
S400,LS3900S/S400,S100, LS4300EJ,LS4300EJ/S430E,SH300-2B,SH350HD-2B
EC280,EC290,EC300,
KB4200EXC
34~47 ton
231, 235, 330, 231 D, 235 B,235 BME, 235 C, 235 ME C,235/235B/235C, 330 BL, AL,330 C-Stiel, 330 D-Stiel, 330 E-Stiel, 330 L/LM, 330 ME, 330 ME E-StielDX350LC,DC380LC,DX420LC
EX 400, EX 400-1,UH 14 / 142, UH 170 / LC, UH 181, UH 171LC,EX 400 / LC, UH 181
R360LC-3,R420/450LC-3, R 3600LC-3, R 360LC-3, R 420/450LC-3
JS 450
JD 890, JD 990, JD992 D
SK 400, SK 400 LC, SK 460 IV, K914,SK400/LC/MK3
PC360-5, PC400-5,PC400 LC-5, PC400LC-6, PC360-3,PC400-1, PC400-3,PC360-5, PC400-5
R944, R952,R954, R961,R962
LS-5800 FJ2,LS5800J/S580,SH400-2B,SH450HD-2B
EC360,EC390,EC420,EC450,EC460
TOR13EXC
12~16 ton
35YC
205, 206, 211, 212,312, 205 B, 206 B,212 B, M 315, 206BFT,212BFT, 311
DX140W
EX 100, EX 100 / M-5, EX 100/ WD, EX 100 / WD-1, EX 100-2, EX 100-3, EX 100-3, EX100M, EX 120, EX 120 WD, EX 120-1, EX 120-2, EX 120-3, EX 120-5, EX 150R 120 W, R 130 LC, R 1300LC(W)-3
7, 805, 806, 811, 812,814, 5 B, 5 C / 5W, 6 B, 6C, 6(4-Zyld), 805B, 805BTurbo, 806B, 806C, JS110, JS 130, JS 130 W,JS 150 W
JD 290 D, JD 490 E, JD 495 D, JD 590 D, JD555, JD710B
SK 100 III, SK 100 MARK 1,SK 110 IV, SK 120 III, SK 120 MARK 1, SK 130 IV,SK 150 III, SK 100 MARK3,SK 100W, SK 120/LC/MK3,SK 150/LC/MK3, K904PC120-6, PC150-5,PC150H-5, PC180L-5,PC20 3 , PC 50, PC 50 5,PW 130-6, PW 95, PW95-5, PW 100-3, PC 100-2, PC 120-2A900, R900,A/R901, R308,A310, A312,A314
LS 2600 FJ2, LS 2650 FJ2, S 250, S 260/S 40, LS 2600J, S260E, SH 120-3, S 260LL, S 260SS, S 265, LS 2650 AJ, LS2650EJ/S 265E, SH 135U-2, SH 100LC-2
EC130,EW130,EC140,EW145,EW646,L60E,L70E
TOR18EXC
17~23 ton
215, 219, 224, 317, 320, 213 B, 214 B, 215 BLC/SA,215 C/LC, 215 D, 215 D/LC,219 D, 219 LC, 224 B, 225 BLC, 320 B-Stiel, 320 C-Stiel, 320L, M318SOLAR170
EX 200, EX 200-2, EX 200-3,EX 200-3, EX 220, EX 220-2,EX 220-3, EX 220-1, EX 200 /LC, UH 073, UH 081 / LC, UH 09, UH 06D/062, UH 083 /LC, UH 09R 200W-2/200W , R180LC-3, R 200LC/210LC, R210LC-3, R 2000W/LC
JS 200, 807, 817, JS180, 807B, 7B / 7C, 807C, JS 210
JD 690 B, JD 690 D, JD 690 E, JD 54
SK 200-4, K907D/ DL,PC180-3, PC180-5, PC200LC, PC200 LC 5 , PC200 LC-3, PC200 LC-6, PC200-1/-2/-3/-5/-6, PC210-3/-5/-6,PC220-1/-5, PW 170-5A900, R900,A/R901, R308,A310, A312,A314
LS 2800 FL2, LS 3400EJ /S340E, LS2800CJ, LS2800DJ/ S280, S 280 / S70, S 280 E,SH 200 HD-2, SH 200 LC-2,SH 200-3, SH 215 X, SH 220-3
EC150,EW150,EW160,L90E
TOR23EXC
18~26 ton
224, 225, 320, 322, 213 B, 214 B,215 BLC/SA, 215 C/LC, 215 D/LC, 219 D, 219LC, 224 B, 225 A-C, 225 B, 225 BLC, 225 D, 320 B-Stiel, 320 C-StielDX210W,DX220LC
EX 200, EX 200-2, EX 200-3, EX200-3, EX 220, EX 220-2, EX220-3, EX 220-1, EX 200 / LC,UH 073, UH 081 / LC, UH 09, UH103 / LC, UH 083 / LC, UH 09,UH 10R 200W-2/200W , R180LC-3, R 200LC/210LC, R210LC-3, R 2000W/LC, R 250LC-3
8 B, JS 200, JS 240,817, JS 180, 807B,7B / 7C, 807C, JS210, 8C / 8D, 808, JS240/ 260
JD 690 D, JD 690 E, JD 790 E, JD 54
SK 200-4, SK 200-LC MK 4,SK 200 III, SK 200 LC, SK 200LC MARK III , SK 200 MARK1, SK 200 MARK III, SK 210IV, SK 220 MK III, SK 220 IIIMARK 1, SK 220 LCPC180-5, PC200-5, PC200-6,PC200 LC 5 , PC210-5, PC210-6, PC220-5, PC240-5, PC240-6,PC260-6, PC200LC, PC220 LC 3, PC180-3
A/R904, A/R912,A/R914, A/R921,A/R922, A924,A/R932, R941
LS-3400 FJ2, LS 2800 FL2,SH 200-3, S 280 / S70, LS 2800CJ, LS 2800DJ /S280, S 280 E, SH 200 LC-2,SH 200 HD-2, SH 215 X, SH220-3, S 340, LS 3400J / S90
EC200,EC210,EC230,EC240,EW230
TOR26EXC
20~30 ton
225, 322, 325, 225 A-C, 225 B, 320L, 325 C, 325 LR W/L,325 ME D-Stiel, 225 BLC, 322 L/N/LN, 225 B,225 D/LC, 325 L/LN, 325 BL,E240/240 BDH280, S280LC-III,S290LC-V, S280
EX 160 HD, EX 220, EX 220-2, EX220-3, EX 270, EX 270-3, EX 300,EX 300-2, EX 300-3, EX 220-1,EX 270 SEE A , UH 09, UH 103 /LC, EX 270 / LC, UH 123, UH121 / LC,R 280, R 250LC-3, R290LC, R 290LC-3
8 B, JS 240, 8C / 8D, 808, JS240/ 260
JD 790 E, JD 792
SK 220 LC, SK 220 MARK 1, SK250 IV, SK 300, SK300 II MARK 1,K909A / LC
PC220-5, PC240-5, PC240-6,PC250LC-6, PC260-6,PC280-5, PC220 LC 3 ,PC220-2, PC220-3, PC280-3,PC300-1, PC210LC-6,PC220-1R922 Litronic,R932, R932 Litronic,R902HD-K, A/R932,R941, R941B
LS 3400 FJ2, SH 220-3, S 340, LS 3400J / S90, SH 220LC-2, LS 3400AJ /S340, LS 3400EJ / S340E, LS3900J/S100, S 400, LS 3900S/S400, S 100
EC240
TOR36EXC
27~35 ton
229 A-C, 229 D, 325C, 325 LR W/L, 325L/LN, 229, 330L/LM, 330 ME, 325BL
DX300LC,SOLAR300LC
EX 160 HD, EX 300, EX300-2, EX 300-3, EX3500, EX 270 SEE A ,UH 121 / LC, UH 143 /LC, EX 300 LC, UH 14 /142R320LC-3, R 290LC, R 290LC-3, R 320LC-3
JS 300
JD 892 E, JD 792,JD 892D
SK 300, SK 300 II MARK 1,SK 300 III MARK 1,SK 330 IV, SK 300/LC/MK3
PC250LC-6, PC280-5,PC300-3, PC300-5, PC300L-5, PC300LC-6,PC300-6 , PC300LC-5,PC300LC 3 , PC280-3,PC300-1, PC300-2, PC300A/R942LIT,A/R934, R924R932LIT
S 400, LS 3900S/S400, S 100, LS 4300EJ, LS4300EJ/S430E, SH300-2B, SH 350HD-2B
EC280,EC290EC300
TOR42EXC
34~47 ton
231, 235, 330, 231 D, 235 C,235 ME C, 235/235B/235C,330 BL, AL, 330 C-Stiel, 330 D-Stiel, 330 E-Stiel, 330 ME E-Stiel, 330 L/LM,330 ME, 235 BME, 235BDX350LC, DC380LC, DX420LC
EX 400, EX 400-1,UH 14 / 142, UH 170/ LC, UH 181, UH171LC, EX 400 / LC,UH 181
R 3600LC-3, R 360LC-3, R 420/450LC-3
JS 450
JD 890, JD 990, JD992 D
SK 400, SK 400 LC,SK 460 IV, K914,SK400/LC/MK3
PC360-5, PC400-5,PC400 LC-5, PC400LC-6, PC360-3,PC400-1, PC400-3,PC360-5, PC400-5
R944, R952, R954R961, R962
LS-5800 FJ2,LS5800J/S580,SH400-2B,SH450HD-2B
EC360,EC390,EC420,EC450,EC460
TOR55EXC
47~70 ton
350, 245 B, 245 B ME,245 B.D, 245 ME A,245/CODE 61(141847),315L, 350 F-Stiel, 350 ME, 350 ME/LME/L, 245DX480LC
EX 550, EX 700, UH20, EX7 00 / H, BE, UH120
SK 600
PC 550-5, PC 650-5, PC 650-1, PC 650-3
A944, R962LIT,R964, R974
EC620,EC650
TOR70EXC
65~85 ton
375, 245 B ME, 245ME A, 375 H-Stiel, 375 J-Stiel, 375 ME/LME/L
EX 1800-2, EX 700, EX 700 / H, BE, UH30
PC 650-5, PC 650-1, PC 650-3
R972, R 974 Litronic
S740,LS7400A
15
Attachments series Selections of Attachments Series
▶ Replaceable jaw for multiple usage▶ Cutting steel structure and pieces based on
the strong power with efficient performance.▶ Equipped the strongest level of dual cylinder to
perform efficiency.▶ Highest stability and durability with light weight.
Above specifications are subject to change without prior notice for quality improvement.
Above specifications are subject to change without prior notice for quality improvement.
TRIS1M TRIS2M TRIS3M TRIS5M
10523189035570221254.9903.51756.941016.158523210
2,98758,100128,08730,00066,13819,90043,871
28011
0.8 ~ 21,764 ~ 4,409
451.8552.2301.2
HARDOX 500Yes
360。( free rotating )YesNo
180397
1,11044688271355.31003.92058.148018.968527210
2,98761,900136,46432,20070,98821,30046,958
36014
1.5 ~ 33,307 ~ 6,614
502.0602.4301.2
330728
1,305 51726291656.51204.72208.749019.371028210
2,98783,600184,30439,50087,08127,90061,508
43017
2.5 ~ 55,511 ~ 11,023
602.4702.8451.8
400882
1,41056840331656.51204.726010.253020.979031.1210
2,98799,400219,13648,200106,26131,50069,445
53021
4 ~ 68,818 ~ 13,228
602.4702.8502.0
Unitkgflb
mminchmminch mminchmminchmminchmminchmminch
kgf/cm2
psikgflb
kgflb
kgflb
mminchtonlb
mminchmminchmminchN/AN/AdegN/AN/A
Item / Model
Weight
Cylinder
Operating pressure
Force at the 1st jaw tip
Opening width of jaw tip
Pin dia.
Jaw plate
Swivel joint
Synchronizing linkageRotating angle
Power booster
Force at the cutter
Force at the end ofjaw tip
Suitable excavator
Overall Length
Overall Width
TRIS22CHR-Ⅱ TRIS22PHR-Ⅱ TRIS30CHR-Ⅱ TRIS30PHR-Ⅱ
1,6803,7042,12883.781,35453.31886
34.88180 7.09 5785─
─
183300
4,226200 ~ 25052.8 ~ 66.1
18 ~ 26Option
1602,275
36 ~ 409.5 ~ 10.513 ~ 15
1,760 3,880 2,02479.81,54260.71 890
35.04180 7.09 51618795183300
4,226200 ~ 25052.8 ~ 66.1
18 ~ 26Option
1602,275
36 ~ 409.5 ~ 10.513 ~ 15
2,6305,798 2,41895.21,77369.801,16345.792007.8793135─
─
317 320
4,550 250 ~ 30066.1 ~ 79.2
26 ~ 32Option
1602,275
36 ~ 409.5 ~ 10.513 ~ 15
2,8006,173 2,631
103.58 1,86973.58968
38.112007.87 91140110171317 320
4,550 250 ~ 30066.1 ~ 79.2
26 ~ 32Option
1602,275
36 ~ 409.5 ~ 10.513 ~ 15
Bore dia.
Rod dia.
Stroke
Min length
Maxlength
Cyl +jaw
Jaw +frame
Depth
Material
▶ Refurbishment work for concrete buildings - The old building, that keeps strong foundation,
needs to be changed the new layout or equipments.- To raise value of building with lower cost is
retaining internal structure rather thanreconstruction in the metropolis.
▶ New building needs to be changed is design.▶ Refurbishment in old city
- In order to keep beautiful outside sight and view inold city, permitted only the inside partially demolition.
- In this case, mini crusher is the most powerfulattachment not generating vibration.
▶ In order to change the layout of a building under construction.
Mini Crusher
Multi Crusher
16
Unitkgflb
mminchmminchmminchmminchtontontontonton
kgf/cm2
psiLPMGPMtonN/A
kgf/cm2
psiLPMGPMRPM
Item / Model
Weight
Overall Width
Cutter Length
Cutting Force
Operating Pressure
Oil Flow Rate
Sutiable ExcavatorSpeed-Up Valve
Motor SettingPressure
Motor Oil Flow Rate
Revolving Speed
Overall Length
Max. Opening Width
Crushing Force
ABCD
2,000 2,3861,367886200537297145165300
200 ~ 25018 ~ 26Option
160 36 ~ 4013 ~ 15
2,6002,627 1,44395730073102 134201229320
250 ~ 30026 ~ 32Option
160 36 ~ 4013 ~ 15
UnitItem / Modelkgfmmmmmmmmtontontontonton
kgf/cm2
LPMtonN/A
kgf/cm2
LPMRPM
WeightOverall LengthOverall WidthMax. Opening WidthCutter Length
Cutting ForceOperating PressureOil Flow RateSutiable Excavator
Speed-Up ValueMotor Setting PressureMotor Oil Flow RateRevolving Speed
TRIS22PHR TRIS30PHR
Crushing Force
ABCD
Above specifications are subject to change without prior notice for quality improvement.
1,800 1,836 1,430320850200108150178 220270300
200 ~ 25018 ~ 26Option
2,350 1,981 1,541 380920300123171 199239 286320
250 ~ 30026 ~ 32Option
UnitItem / Model
kgfmmmmmmmmtontontontontonton
kgf/cm2
LPMtonN/A
WeightOverall LengthOverall WidthArm WidthMax. Opening WidthCutter Length
Cutting ForceOperating PressureOil Flow RateSutiable ExcavatorSpeed-Up Valve
TRIS22P TRIS30P
Crushing Force
ABCD
Above specifications are subject to change without prior notice for quality improvement.
2,000 2,321 1,35464540061172256300
200 ~ 25018 ~ 26Option
16030 ~ 4013 ~ 15
2,630 2,529 1,21373150082134 229320
250 ~ 30026 ~ 32Option
16030 ~ 4013 ~ 15
UnitItem / Model
kbfmmmmmmmmtontonton
kgf/cm2
LPMtonN/A
kgf/cm2
LPMRPM
WeightOverall LengthOverall WidthMax, Opening WidthCutter Length
Operating PressureOil Flow RateSutiable ExcavatorSpeed-Up ValveMotor Setting PressureMotor Oil Flow RateRevolving Speed
TRIS22DHR TRIS30DHR
Crushing Force & Cutting Force
ABC
Above specifications are subject to change without prior notice for quality improvement.
▶ Reinforcement of anti-twisted cutter and anti-break cutter body.
▶ Improvement of several problems from other pulverizer, such as powerful motor, light weight center jaw and reinforce cylinder.
▶ Cutter with convenience for tighten and loosen bolts and nuts to repair and replace easily.
Hydraulic Pulverizer
▶ Cutting steel structure and pieces based on the strong power with efficient performance.
▶ Equipped the strongest level of cylinder to perform efficiency.▶ Highest stability and durability in this model with light weight.
Fixed type Pulverizer
▶ Cutting steel structure and pieces based on the strong power with efficient performance.
▶ Equipped the strongest level of cylinder to perform efficiency.
▶ Highest stability and durability with light weight.
Demolition
17
Attachments series Selections of Attachments Series
▶ Auto hydraulic free rotation device, high quality dual cylinder, specializedin demolition for steel frame construction (H beam, rolled steel column)
▶ Multiple usage from changing jaws.▶ The Shear specialized in cutting metal with
highest stability and durability with light weight.
Shear
Above specifications are subject to change without prior notice for quality improvement.
TRIS2S TRIS3S TRIS5S TRIS5SHR
190
419
1,085
43
478
19
210
2,987
65
72
200
8
1.2 ~ 3.8
1.3 ~ 4.2
40
1.6
No
360。( free rotating ) 360。( Hydraulic rotating )
HARDOX 500
Yes
260
573
1,186
47
576
23
210
2,987
111
122
231
9
2 ~ 5.7
2.2 ~ 6.3
40
1.6
430
948
1,412
56
665
26
210
2,987
152
167
288
11
4 ~ 8
4.4 ~ 8.8
50
2.0
500
1,102
1,456
57
665
26
210
2,987
152
167
288
11
4 ~ 8
4.4 ~ 8.8
50
2.0
Unit
kgf
lb
mm
inch
mm
inch
kgf/cm2
psi
ton
US ton
mm
inch
ton
US ton
mm
inch
N/A
N/A
deg
N/A
Item / Model
Weight
Overall Length
Operating pressure
Opening width of jaw tip
Jaw plateThicknessMaterial
Rotating angle
Overall Width
Max Force
Suitable excavator
Swivel joint
Power booster
▶ High strength materials of jaws : - Arms of Shear are made with the HARDOX 500
(made by SSAB), which are one of the world shardest wear plate, for the durability and abrasion resistance of Mini Shear.
▶ Pin with large diameter :- Pins with large diameter provide well stress
distribution. - Pins made with high toughness materials,
its surfaces are coated with chrome for abrasionresistance.
▶ High quality cylinder : - Cylinder is designed for 350bar, and assembled
by high quality seals for durability, its surfacesare coated with chrome for abrasion resistance.
Mini ShearAbove specifications are subject to change without prior notice for quality improvement.
TRIS22SHR TRIS30SHR TRIS22SHR-II TRIS30SHR-II
2,0004,409 1,99578.54 1,07142.17507
19.96500
19.69172172172172172300
4,226200 ~ 25052.8 ~ 66.1
18 ~ 26Option
1602,275
36 ~ 409.5 ~ 10.513 ~ 15
2,4505,4012,38699.941,21447.79580
22.83600
23.62256256256256256320
4,550 250 ~ 30066.1 ~ 79.2
26 ~ 32Option
160 2,275
36 ~ 409.5 ~ 10.513 ~ 15
1,7603,8802,07281.571,294 50.94522
20.55 120 x 4ea4.72 x 4ea
7394127200
3004,226
200 ~ 25052.8 ~ 66.1
18 ~ 26Option
1602,275
36 ~ 409.5 ~ 10.513 ~ 15
2,8006,1732,43495.831,58562.40603
23.74 120 x 5ea4.72 x 5ea
129 157197259385320
4,550 250 ~ 30066.1 ~ 79.2
26 ~ 32Option
1602,275
36 ~ 409.5 ~ 10.513 ~ 15
Unit
kgf
lb
mm
inch
mm
inch
mm
inch
mm
inch
ton
ton
ton
ton
ton
kgf/cm2
psi
LPM
GPM
ton
N/A
kgf/cm2
psi
LPM
GPM
RPM
Item / Model
Weight
Overall Length
Max. Opening Width
CuttingForce
Overall Width
Cutter Length
Operating pressure
Sutiable Excavator
Motor SettingPressure
Revolving Speed
Oil Flow Rate
Speed-Up Valve
Motor Oil Flow Rate
A
B
C
D
E
18
▶ Dual cylinders - Equipped with dual cylinders which provide jaw exchange.
▶ Single main-pin - Easy and simple to detach and storage.▶ Multi-use (3 Jaws for 1 body) - Multi shapes of
the jaws in one body.▶ Enhanced durability - Declining tool breakdown and
wearing with welded tool, benefit from fine steel.▶ Superior design - Single pin offers narrow grab
width, enabling multi-purpose.▶ Handy maintenance - Designed for convenient
maintenance by detaching jaw, ▶ which allows easy to enter. ▶ Enhanced durability. ▶ Lower noise.
TRIS 22
Quick Coupler
Above specifications are subject to change without prior notice for quality improvement.
2,680
105.51
860
33.86
295
11.61
720
28.35
456
17.95
400
15.75
700
27.56
680
26.77
A B C D E F G H
TRIS 22
2,0004,409 2,26088.981,150 45.28400
15.75860
33.86 190 7.48
2290639 200 320
4,641 38~90
10.0 ~ 23.870 ~ 175
15.4 ~ 38.54.7 : 1
1"ORFS#161/2"BSP20 ~ 28
Unit
kgflb
mminchmminchmminchmminchmmincheatonlbs
l/minbarpsi
l/mingal/min
barpsiN/Ainchinchton
Item / Model
Weight
Overall Length
Overall Width
Opening Width
Max. jaw open Width
Cutter Length
Cylinder
Cutting force
Operate Pressure
Oil Flow
Rotation
Hose
Oil flow
OperatePressure
Rotation ratio
rotating lineMain line
Sutiable Excavator
Above specifications are subject to change without prior notice for quality improvement.
KMQ 20H/P
306 ~ 475230 ~ 268175 ~ 24286 ~18590 ~ 140159 ~ 16525 ~ 40
3040 ~ 38010 ~ 20
~ 3
KMQ 30H/P
534 ~ 545307
258 ~ 263155 ~ 170208 ~ 318
15045 ~ 5050 ~ 6040 ~ 38010 ~ 204 ~ 9
KMQ 60H/P
765388
353 ~ 436232 ~ 315340 ~ 486
22050 ~ 70
120 ~ 13040 ~ 38010 ~ 209 ~ 16
KMQ 80H/P
924 ~ 944492
449 ~ 483306 ~ 340256 ~ 390
27570 ~ 80
280 ~ 29040 ~ 38010 ~ 2018 ~ 26
KMQ 100P
983 ~ 1,050574
543 ~ 568375 ~ 411413 ~ 590
30080 ~ 90
420 ~ 43040 ~ 38010 ~ 2027 ~ 30
KMQ 140P
1,006 ~ 1,173558 ~ 610606 ~ 663416 ~ 469520 ~ 590
36090 ~120
450 ~ 58040 ~ 38010 ~ 2034 ~ 40
KMQ 170P
1,226612
630 ~ 667407 ~ 437540 ~ 575
367100 ~ 110
75540 ~ 38010 ~ 2043 ~ 50
KMQ 200P
1,285662
680 ~ 710467 ~ 507570 ~ 630
400110 ~ 120
89040 ~ 38010 ~ 2055 ~ 65
UnitItem / ModelLength
WidthConclusion Width
Top and Bottom distance that decrease
Weight
Necessity Flux
Height
Conclusion Extent
Pin Diameter
Working Pressure
Suitable Excavator
mmmmmmmmmmmmØ
kgkgf/cm2
l/minton
▶ FULL AUTOMATIC SAFETY SYSTEM- A revolutionary technology of battery-powered switching system controls the switch, release or
lock, at the safety pin from excavator power line not by its hydraulic line ( patented ).When electric power disconnected, it automatically switches to manual operation.
▶ ALL IN ONEOne Body Design : No welding between Middle and Bottom Plate provides evenly distributedstress points, increasing durability 10 times more than the couplers with welded parts.Versatility : Offering the most versatility ever, it enables you to use one coupler for multiplebrands of attachment within the same excavator weight class.
19
TRIS 22mm
inch
Model Unit
Attachments series Selections of Attachments Series
Compactor
Stone Grab
▶ KOMAC Compactor has high frequency vibration with high impact power to makequick work of any compaction task.
▶ We offered line of mounted compactor ranging in centrifugal force from3,000kg ~ 14,000kg.
▶ KOMAC vibrating compactor with service life, performance, and versatilityfills many construction fields.
▶ They allow you to maximize the use of backhoe & excavators while substantiallyincreasing your production over other methods.
Above specifications are subject to change without prior notice for quality improvement.
KMC9 KMC13 KMC22 KMC35
3,9008,598
Max. 2,200100 ~ 13010 ~ 13
1,450 ~ 188511029
720 X 67228.34 X 26.45
4 ~ 9939
36.96672
26.45
5601,235
5001,102
5201,146
68126.81
63024.80
78730.98
Unit
kgflb
cpmbarMpapsi
l/ming/minmminchkgflb
tonmminchmminchmminch
Division
Impulse force
Cycle per min
Oil flow (Max)
Dimensions Base plat
Base Machine
Width
Weight
Length
Height
Relief pressure
Rotate Type Plate Type Pin Type
ST600 ST800 ST1000 ST1500600
1,325
1,329
121
520
900
833
777
12 ~ 18
800
1,526
1,440
130
520
900
1,050
1,041
18 ~ 25
1,000
1,804
1,760
140
572
1,004
1,150
1,189
28 ~ 35
1,500
2,100
2,057
145
650
1,100
1,300
1,320
36 ~ 42
Unitliter
kgf
mm
mm
mm
mm
mm
mm
ton
Item / Model
Capacity
Weight
Inside operate length
Outside operate length
Operate width A
Operate width B
Inside operate height
Outside operate height
Suitable Excavator
Above specifications are subject to change without prior notice for quality improvement.
20
4,60010,141
Max. 2,200100 ~ 13010 ~ 13
1,450 ~ 188514037
800 X 75031.49 X 29.52
9 ~ 181,04040.94750
29.52
7001,543
6001,323
6201,366
68627.00
68026.77
82632.5
Rotate Type Plate Type Pin Type
16,0936,614
Max. 2,200100 ~ 13010 ~ 13
1,450 ~ 188518047.5
900 X 84035.43 X 33.07
20 ~ 301,17246.14840
33.07
9502,094
9001,984
9202,028
73628.97
75429.68
98038.58
Rotate Type Plate Type Pin Type
15,40033,951
Max. 2,200100 ~ 13010 ~ 13
1,450 ~ 188522058
1,260 X 1,17049.60 X 46.06
30 ~1,63864.481,17046.06
1,3302,932
1,2602,778
1,2902,844
1,00339.48
1,04040.94
1,31451.73
Rotate Type Plate Type Pin Type
▶Pipe Setting Pressure : Close Pressure : 250kg/cm2 / Open Pressure : 250kg/cm2
▶Rotator Pressure : 100 ~ 140kg/cm2
▶Motor Drain Pipe Setting : Setting : R.P. 140kg/cm2 / Non-Setting : R.P. 100kg/cm2
▶ Design for minimum height can load or unloadobjects to high place
▶ Main frames are made by Hardox for the longer life time▶ Use for carrying industrial waste▶ Use for loading and unloading rocks
Wood Grab
▶ Design for minimum height can load or unload objects to high place.
▶ Main frames are made by HARDOX for longer life time.▶ Teeth are replaceable.
▶ It can be loading or unloading much scrap iron and waste paper.
▶ Hydraulic free rotation (option)▶ Protection device of cylinder rod▶ Change bushing
▶ Pipe Setting Pressure :Close Pressure : 250kg/cm2 / Open Pressure : 250kg/cm2
▶ Rotator Pressure : 100 ~ 140kg/cm2
▶ Motor Drain Pipe Setting : Setting : R.P. 140kg/cm2 / Non-Setting : R.P. 100kg/cm2
SSA600 SSA800 SSA1000 SSA1500
600
1,200
1,774
928
1,304
1,535
12~18
800
1,560
1,945
961
1,392
1,647
18 ~ 25
1,000
1,800
2,178
1,198
1,600
1,863
28 ~ 35
1,500
2,200
2,513
1,376
1,793
2,081
36 ~ 42
Specification - A-Type A-Type
SW300 SW600 SW800 SW1000 SW1500 SW2000300
400
1,196
100
397
675
5
600
850
1,709
280
741
1,157
12 ~ 18
800
1,000
1,750
310
778
1,244
18 ~ 25
1,000
1,300
1,880
340
1,262
1,370
25 ~ 32
1,500
1,600
2,250
566
1,550
1,846
32 ~ 42
2,000
1,950
2,600
705
1,720
2,010
42 ~ 47
Above specifications are subject to change without prior notice for quality improvement.
21
Scrap Grab
SSb600
600
1,050
1,859
849
1,550
1,850
12 ~ 18
SSb800
800
1,300
1,939
969
1,674
1,970
18 ~ 25
SSb1000
1,000
1,500
2,013
1,192
1,969
2,203
28 ~ 35
SSb1500
1,500
1,800
2,403
1,315
2,107
2,381
36 ~ 42
SSb2000
2,000
2,100
2,699
1,705
2,673
2,939
43 ~ 47
Specification - B-Type B-Type
Above specifications are subject to change without prior notice for quality improvement.
Above specifications are subject to change without prior notice for quality improvement.
▶ Designed optimization ▶ Use for loading and unloading rocks▶ Strong structure of machine
Unitliter
kgf
mm
mm
mm
mm
ton
Item / ModelCapacity
Weight
Inside operate length
Outside operate length
Inside operate height
Outside operate height
Suitable Excavator
Unitliter
kgf
mm
mm
mm
mm
ton
Item / ModelCapacity
Weight
Inside operate length
Outside operate length
Inside operate height
Outside operate height
Suitable Excavator
Unitliter
kgf
mm
mm
mm
mm
ton
Item / Model
Capacity
Weight
Inside operate length
Outside operate length
Inside operate height
Outside operate height
Suitable Excavator
Attachments series Selections of Attachments Series
Demolition Grab
Clam shell Grab
SG1500 SG2000 SG3000 SG4000600
1,050
1,751
814
900
596
762
12 ~ 18
800
1,370
1,923
883
1,030
744
905
18 ~ 25
1,000
1,700
2,082
982
1,080
770
956
28 ~ 35
1,500
2,000
2,120
1,060
1,160
794
1,006
36 ~ 42
Unitliter
kgf
mm
mm
mm
mm
mm
ton
Item / Model
Capacity
Weight
Inside operate length
Outside operate length
Operate width A
Inside operate height
Outside operate height
Suitable Excavator
Above specifications are subject to change without prior notice for quality improvement.
SC600 SC800 SC1000 SC1500 SC2000600
720
2,223
1,752
1,408
2,200
600
12 ~ 18
800
980
2,223
1,752
1,408
2,200
800
18 ~ 25
1,000
1,200
2,328
1,856
1,408
2,253
900
28 ~ 35
1,500
1,500
2,641
2,151
1,408
2,404
1,200
36 ~ 42
2,000
1,810
2,735
2,247
1,425
2,450
1,500
43 ~ 47
Unitliter
kgf
mm
mm
mm
mm
mm
ton
Item / Model
Capacity
Weight
Inside operate length
Outside operate length
Inside operate height
Outside operate height
Operate width-C
Suitable Excavator
Above specifications are subject to change without prior notice for quality improvement.
22
▶ Design for minimum height can load or unload objects to high place.
▶ Teeth are replaceable.
▶ Use for carrying, loading, or unloading
▶ Use for digging and dredging▶ One cylinder or two cylinder
▶ Pipe Setting Pressure :Close Pressure : 250kg/cm2 / Open Pressure : 250kg/cm2
▶ Rotator Pressure : 100 ~ 140kg/cm2
▶ Motor Drain Pipe Setting : Setting : R.P. 140kg/cm2 / Non-Setting : R.P. 100kg/cm2
▶Pipe Setting Pressure : Close Pressure : 250kg/cm2 / Open Pressure : 250kg/cm2
▶Rotator Pressure : 100 ~ 140kg/cm2
▶Motor Drain Pipe Setting : Setting : R.P. 140kg/cm2 / Non-Setting : R.P. 100kg/cm2
▶ Design for minimum height can load or unloadobjects to high place
▶ Main frames are made by Hardox for the longer life time▶ Use for carrying industrial waste▶ Use for loading and unloading rocks
▶ Removal of broken pieces▶ Usage of qualified raw material for extension of
its durability.▶ Replaceable teeth with welded teeth ▶ Teeth are replaceable.▶ Easy to install to the excavator▶ Possible usage of quick coupler
Mechanical Grab
Ripper
SMG10 SMG20 SMG30 SMG40 SMG50 SMG60780
2,200
230
1,330
640
1,000
10 ~ 15
1,330
2,600
250
1,460
730
1,140
15 ~ 20
1,560
2,900
260
1,580
730
1,140
20 ~ 25
1,980
3,100
280
1,700
800
1,240
25 ~ 30
2,450
3,250
310
1,810
840
1,338
30 ~ 40
2,990
3,500
330
1,970
960
1,520
40 ~ 50
Unitkgf
mm
mm
mm
mm
mm
ton
Item / Model
Weight
Full Open(A)
Full Closed(B)
Height Closed(C)
Width Upper Moveable Jaw
Width Lower Fixed Jaw
Suitable Excavator
Above specifications are subject to change without prior notice for quality improvement.
23
KMR035 ~ 7
260 ~ 270
717
45
569
674
93
KMR0612 ~ 15
398
1067
65
842
1010
275
KMR0818 ~ 22
460 ~ 490
1167
70 ~ 80
894
1105
440
KMR1028 ~ 31
530 ~ 590
1358
80 ~ 90
1046
1255
625
KMR1434 ~ 38
610 ~ 630
1626
90 ~ 100
1259
1515
885
KMR1739 ~ 43
620 ~ 650
1626
100 ~ 110
1259
1520
950
KMR2045 ~ 50
660 ~ 720
1679
110 ~ 120
1270
1560
1065
Unitton
mm
mm
mm
mm
mm
kgf
Item / Model
Suitable Excavator
A
B
C
D
E
Weight
Above specifications are subject to change without prior notice for quality improvement.
KOMAC HEAD OFFICE6F, Shinsong B/D, 25-4, Yeouido-Dong, Yeoungdeungpo-Gu, Seoul, KoreaTel : +82-2-761-0880(Rep.) Fax : +82-2-761-0049 E-Mail : [email protected]
www.komac.co.kr
1312
30