Hydraulic Clamps 07 2010

7/23/2019 Hydraulic Clamps 07 2010

http://slidepdf.com/reader/full/hydraulic-clamps-07-2010 1/8

Safe grip for any operation

www.boecker-group.com

Overview hydraulic clamps


http://slidepdf.com/reader/full/hydraulic-clamps-07-2010 2/82 www.boecker-group.com

Always a safe grip!

Böcker Hydraulic Clamps are tailor-made clamps for thetransport of all kinds of brick packages. No matter if you

use them on an hydraulic loading crane to load and unloadthe truck, on bridge cranes for the internal transport in fac-tories or even on a fork-lift truck. The comprehensive pro-duct range offers the right clamps for each transport unitand all brick formats respectively.

Clamps for the transport of brick packages

Hydraulic clamps for

the Building Material Industry


the Concrete-Block Industry

H G P - 1 2 0 0 / 2 - 0 , 8

5

H G P - 1 2 0 0 / 2 - 1 , 0

5

H G P - 1 2 0 0 / 2 - 1 , 2

5

H G P - 1 2 0 0 / H 2

H G P - 1 5 0 0 / H 2

H G P - 1 5 0 0 / 1

H G P - 1 5 0 0 / 1 . 1

H G P - 1 5 0 0 / 2

H G P - 1 5 0 0 / 2 . 1

H G P - 1 8 0 0 / 1

H G P - 1 8 0 0 / 1 . 1

H G P - 1 8 0 0 / 2

Truck-loadingcrane

Fork-lift truck

Bridge crane

Opening width [m]0.40 –

1.40

0.40 –

1.40

0.40 –

1.40

0.40 –

1.40

0.36 –

1.34

0.45 –

1.10

0.45 –

1.10

0.36 –

1.34

0.36 –

1.34

0.55 –

1.30

0.55 –

1.30

0.36 –

1.34

Grip width [m]0.50 –1.20

0.50 –1.20

0.50 –1.20

0.50 –1.20

0.40 –1.20

0.50 –1.00

0.50 –1.00

0.40 –1.20

0.40 –1.20

0.60 –1.05

0.60 –1.05

0.40 –1.20

Grip height [m] 0.85 1.05 1.251.05 –1.60

1.05 –1.60

0.85 1.00 0.85 1.00 0.85 1.00 0.85

Load-bearing capacity [kg] 2,200 2,000 1,6001,800 –1,300

2,500 –1,500

2,500(1,500)

2,500(1,500)

2,500(1,500)

2,500(1,500)

4,000(1,800)

3,500(1,800)

4,000(1,800)

Dead weight [kg] 255 260 265 300 480 330 380 370 420 430 445 475

Model

Technical Specifications at one glance

Operation on

All rights reserved for changes in dimension and construction.


http://slidepdf.com/reader/full/hydraulic-clamps-07-2010 3/8www.boecker-group.com 3


the Sand-Lime Brick Industry


the Roof-Tile Industry

HGP1800/2.1

H G P - 2 2 0 0 / 1

H G P - 2 2 0 0 / 1 . 1

H G P - 2 2 0 0 / 2

H G P - 2 2 0 0 / 2 . 1

H G 1

H G 1

H G 1 T - 3 2 5 0

H G 1 T - 4 5 0 0

H G 1 T - 6 0 0 0

H G 1 A - 3 0 0 0

D Z 3 - 1 0 0

D Z 3 - 1 1 5

D Z 3 - 2 0 0

D Z 3 - 2 0 0 B i g

6 –

34

0.55 –

1.30

0.55 –

1.30

0.36 –

1.34

0.36 –

1.34

– –0.75 –

1.40

0.75 –

1.40

0.75 –

1.40

0.75 –

1.40

– – – –

0 –20

0.60 –1.05

0.60 –1.05

0.40 –1.20

0.40 –1.20

0.96 0.960.96 –1.00

0.96 –1.00

0.96 –1.00

0.96 –1.00

3 x0.330

3 x0.334

3 x0.330

3 x0.367

00 0.85 1.00 0.85 1.001.01 –1.12

1.01 –1.65

1.20 1.20 1.20 1.20 0.12 0.12 0.12 0.12

500800)

5,000(2,500)

4,500(2,500)

5,000(2,500)

4,500(2,500)

3,000 1,600 3,250 4,500 6,000 3,250 500 600 1,050 1,250

90 650 700 700 750 520 570 760 980 1,250 900 280 300 400 420

All rights reserved for changes in dimension and construction.



Model HGP-1200 / H2

Model HGP-1200/H2

4 www.boecker-group.com

Clamps for the Building Material Industry

Safe, versatile and fast

These clamps have been particularly designed for theuniversal transport of all kinds of block packages of the

building material industry. Depending on the model, theyare available with different load-bearing capacities, withfixed grip height or as adjustable clamps up to 1.60 m.A comprehensive range of accessories such as grip railsor hydraulic continuous rotators is available as well.

Sturdy high-strength steel construction

High capacity

Large opening width due to 2 cylinders

Slender grip arms

Height adjustable

Simple mechanical synchronization

Fast exchangeable grip rails

Integrated control block with pressure relief valve andcheck valve

Grip arms running in heavy duty plastic sliders

Accessories

Grip rails with heavy duty rubber profiles or spring

loaded steel blades in various lengthsDouble grip rails with heavy duty rubber profiles tohandle lightweight blocks or roof tiles

Continuous rotators with various payloads

Suspension for loading crane

Tilting unit on rotator to reduce the height during driving

Changing device for fast and efficient change to otherlifting equipment, e.g. a pallet fork

Continuous rotator with tilting unit: Operation Continuous rotator with tilting unit: Transport



Cushioned steel blades

www.boecker-group.com 5

Clamps for the Concrete-Block Industry

Safe, sturdy and durable

Clamps for the concrete-block industry are equally used onfork-lift trucks, truck loading cranes and bridge cranes.

Concrete-block factories as well as carriers appreciate thetechnical strengths of the clamps for the transport of inter-locking pavers, hollow blocks, curbstones and paving slabs.


High capacity, slender grip arms

Large opening width due to 2 cylinders

Fix grip height

Simple mechanical synchronization

Strong grip rails for the safe handling of even heavyblock packs


Grip arms running in heavy duty plastic sliders

Accessories

Grip rails with heavy duty rubber profiles or spring loa-ded steel blades in various lengths

Pendulous double grip rails with spring loaded steellaminaries to handle concrete block packs

Continuous rotators with various payloads

Suspensions for loading crane

Height stop to adjust exact grip height

Spring loaded supporting sheets to squeeze loose pavingblock packs

Traverses for fork-lift trucks with integrated continuousrotators with various payloads and integrated stabiliserto absorb pendulum movements of the clamps in thedirection of travel

Grip arms for fork-lift trucks in twin-spar design forassembly on carrying arms of the fork-lift truck includingintegrated continuous rotators with various payloadsand integrated stabiliser to absorb pendulum move-ments of the clamps in the direction of travel

Carrying arm of fork-lift truck with continuous rotator and stabiliser

Model HGP-1800/2.1 on carrying arm of fork-lift truck

Model HGP-1800/2.1 with connecting piece for fork arms

Model HGP-1800/2.1 on truck-loading crane


http://slidepdf.com/reader/full/hydraulic-clamps-07-2010 6/86 www.boecker-group.com

Clamps for the Sand-Lime Brick Industry

Safe, economical and efficient

For the transport of sand lime bricks, various types ofhydraulic clamps are available. Operation on fork-lift

truck, truck loading crane and bridge crane is equallypossible.

All clamps are exactly tailored at the needs of the sandlime brick industry. They all ensure fast and efficienttransport within the factories as well as fast loading oftrucks.

For many years all clamps have been continuously rede-veloped and are well proven on the market. The high-quality design ensures surpassing load-bearing capacityat a minimum dead weight.


High capacity

Slender rotating grip arms


Model HG1A-3000 equipped with powerful hydraulicunit for operation on bridge crane

Accessories

Grip rails with cushioned plastic blades or heavy dutyrubber profiles in various lengths

Pendulous double grip rails with cushioned plastic bladesor heavy duty rubber profiles

Cushioned support pawls for safe grip of the brick packsat the bottom area

Accessories for the model HG1T

Carrying arms for fork lift trucks with fixed or hydrauli-cally extendable extensions, with integrated stabiliser

to absorb pendulum movements of the clamps in thedirection of travel, integrated hydraulic continuousrotators

Hydraulic side shifting

Solenoid switching valve in order to control upon re-quest two hydraulic functions with just one controlcircuit of the fork-lift truck

Solenoid locking valves for the blocking of pendulummovements to lift and set down partial packs precisely

Fixing of the carrying arms on the fork arms or directintegration into the lifting structure of the fork-lift

truck

Model HG1A-3000 on bridge crane

Model HG1T on fork-lift truck

Model HG1T-4500 on fork-lift truck

Model HG1 on truck-loading crane Model HG1A-3000 on bridge crane

Model HG1 on truck-loading crane


http://slidepdf.com/reader/full/hydraulic-clamps-07-2010 7/8www.boecker-group.com 7

Clamps for the Roof-Tile Industry

Model DZ6-240 on fork-lift truck

Safe grip of roof tiles

The transport of roof-tiles requires specific characteristicsfrom the hydraulic clamps. Böcker has the right model

for all those transport operations.Up to 12 single packages of roof tiles, bandaged or packedin shrink foil, can be lifted by our clamps of the DZ seriesin 3 or 6 rows side by side. The clamps have a maximumgrip length of 2.40 m.

Sturdy steel construction

Careful handling of the tile packs by flexible rubberpaws

Space-saving storage of tile packs thanks to slendergrip rails

Integrated control block with pressure relief valve and

check valve

Accessories

Suspensions for loading crane

Continuous rotators

Changing device for fast and efficient change to otherlifting equipment, e.g. a pallet fork

Carrying arm with integrated continuous rotator andstabiliser for operation on fork-lift truck

Model DZ6-240 on fork-lift truck

Model DZ3-115 on truck-loading crane

Model DZ3-115 on truck-loading crane


http://slidepdf.com/reader/full/hydraulic-clamps-07-2010 8/8www.boecker-group.com

Böcker Maschinenwerke GmbH

Lippestraße 69 –73 · D-59368 WerneFon +49(0) 23 89/79 83-0Fax +49(0) 23 89/79 83-9000Mail [email protected] www.boecker-group.com

a d - h o k . c o m

0 6 . 1

0

G B

Böcker Belgium NVBoomsesteenweg 101 · B-2630 AartselaarFon +32 (0) 3/ 45 76 241Fax +32 (0) 3/45 76 242Mail [email protected]

Böcker France SAS

Zac du TEC · F-30320 MarguerittesFon +33 (0)4 6620 9364Fax +33 (0)4 6620 9926Mail [email protected]

Böcker Italia srlVia C. Beccaria 3 · I-37036 San MartinoFon +39 045 / 87 80 399Fax +39 045 / 87 80 420Mail [email protected]

Böcker Nederland B.V.Rolweg 25 · NL-4104 AV CulemborgFon +31 (0) 345/ 51 00 99Fax +31 (0) 345/ 51 08 66Mail [email protected]

Böcker Schweiz AGStriegelstraße 1 · CH-4665 OftringenFon +41(0) 62/797 62 62Fax +41(0) 62/ 797 62 68Mail [email protected]

Date post:	18-Feb-2018
Category:	Documents
Upload:	consultor9010
View:	213 times
Download:	0 times

Hydraulic Clamps 07 2010

Documents