1
© 2010-2019 Inflatable Packers International Hydraulic Fracturing System Designed for a wide range of hydraulic fracturing applications using IPI ® DuraFRAC APPLICATIONS ■ Rock stress testing - also supplied with impression packer ■ Degassing coal seams ■ Hydraulic pre-conditioning for rock burst mitigation and block caving ■ Rock burst mitigation ■ Oil & gas ■ Water well ■ Geotechnical ■ Geothermal FEATURES : ■ Single or Straddle packer system options ■ Standard 1m injection (test) zone - can be designed shorter, if shorter frac intervals are required ■ 1 1 Standard diameters from: 33mm (1 / ”) to 216mm (8 / ”) 4 2 ■ Pressures up to 12,000 psi (850 bar) ■ ■ Proppant capable system available ■ Downhole pressure sensors/gauge carrier option ■ ■ Can be run on a setting tool ■ Available in a range of elastomers & steels grades ■ Fixed maximum diameter format available ■ “Top Wiper” to minimize rock particle puncture (Rock Burst Mitigation and Block Caving) ■ Bypass feature to equalise pressure from below bottom packer to above top packer, available on 70mm diameter and larger sizes. Hydraulic Fracturing System_PS130813_Rev08_Eng : ■ Caprock integrity testing Deflation dump valve options Optional injection subs, extension subs, inflation hose, reels, gauges & rods Version for Rock Burst Mitigation and Block Caving Version of Double Packer packers. Inflatable Packers International Made differently to perform better www.ipipackers.com Perth, Australia Red Lodge, USA Santiago, Chile Sofia, Bulgaria & Dubai, UAE Europe, Middle East & Africa Ph: +359 2 444 23 86 Latin & South America Ph: +56 2 2639 8373 Canada & USA Ph: +1 406 446 9940 Ph: +61 8 9204 2448 Head Office
