Date post: | 30-Dec-2015 |
Category: |
Documents |
Upload: | cheyenne-mendez |
View: | 34 times |
Download: | 0 times |
Hydraulic Systems
Power to move your world
Since 2004 HydraulicSystems has grown into one of the largest independent providers of hydraulic
EQUIPMENT, SERVICE & ENGINEERING
for the land drilling industry
www.hsi-power.com Power To Move Your World
RigRunner™ Walking systems for new and used drilling rigs.
Hydraulic Systems, Inc. has been manufacturing the RigRunner™
walking system since 2004.
More than 100 systems are on drilling rigs around the world
Standard or custom units designed and built to customer
specifications
New rig builds
Retrofitable to existing fleet
www.hsi-power.com Power To Move Your World
Equipment
IDM Quicksilver Drilling Rig
www.hsi-power.com Power To Move Your World
Equipment
2004: The first Quicksilver drilling rig manufactured by IDM.
2009: Global Energy Services acquired IDM and continued to manufacture the Quicksilver drilling rig with the addition of a walking system.
2011: Fred Fortson, the design engineer of the Quicksilver walking system, designed a conversion system for the existing non-walking rigs
2012: Independent Contract Drilling acquires GES. Now manufactures the rigs exclusively for its own drilling services
2013: Hydraulic Systems, Inc., retains FGN Design Engineers, headed by Fred Fortson, to continue to design and market exclusively the Quicksilver drilling rig walking retrofit.
Quicksilver RigRunner™ System
Existing Rig Floor
Walking Beam With
Foot Assembly
Walking beams are attached above rig floor to lift and walk rig without affecting the height of the rig.
Quicksilver RigRunner™ System
Beams attached to rig floor with fabricated saddles that allows beams to be mobile and moved to another rig.
Quicksilver RigRunner™ System
Quicksilver RigRunner™ System
A single lift beam is attached at mud boat.
Equipment
www.hsi-power.com Power To Move Your World
Quicksilver RigRunner™ System
Quicksilver RigRunner™ System
Quicksilver RigRunner™ System
Quicksilver RigRunner™ System
Four removable RigRunner™ waking feet pin-on assemblies are attached to the beams. There are several options for feet assemblies that include remote rotation and length of stroke.
Quicksilver RigRunner™ System
For More Information Regarding the Quicksilver RigRunner™ Walking System:
[email protected]@hsi-power.com
Telephone: 832.791.5003Fax: 832.791.5164
Mail:Hydraulic Systems, Inc.
27601 Commerce Oak DriveThe Woodlands, TX 77385
www.hsi-power.com Power To Move Your World
Since 2004 HydraulicSystems has grown into one of the largest independent providers of hydraulic
EQUIPMENT, SERVICE & ENGINEERING
for the land drilling industry
www.hsi-power.com Power To Move Your World