+ All Categories
Home > Documents > HYDRAULICS - Plastorgomma2017/01/09  · OLEODINAMICA HYDRAULIC OLEODINAMICA HYDRAULICS 2 forniture...

HYDRAULICS - Plastorgomma2017/01/09  · OLEODINAMICA HYDRAULIC OLEODINAMICA HYDRAULICS 2 forniture...

Date post: 07-Feb-2021
Category:
Upload: others
View: 4 times
Download: 0 times
Share this document with a friend
9
1 forniture tecniche industriali industrial supply OLEODINAMICA HYDRAULIC OLEODINAMICA HYDRAULICS
Transcript
  • 1

    forniture tecniche industriali industrial supply

    OLE

    OD

    INA

    MIC

    AH

    YD

    RA

    ULI

    C

    OLEODINAMICA

    HYDRAULICS

  • 2

    forniture tecniche industriali industrial supply

    OLE

    OD

    INA

    MIC

    AH

    YD

    RA

    ULI

    C

    FilettoThread

    Øint. tubo DNpipe DN

    02 1/8" GAS 02 1/8"03 3/16" GAS 03 3/16"04 1/4" GAS 04 1/4"05 5/16" GAS 05 5/16"06 3/8" GAS 06 3/8"08 1/2" GAS 08 1/2"10 5/8" GAS 10 5/8"12 3/4" GAS 12 3/4"16 1" GAS 16 1"

    FilettoThread

    Øint. tubo DNpipe DN

    02 1/8" GAS 02 1/8"03 3/16" GAS 03 3/16"04 1/4" GAS 04 1/4"05 5/16" GAS 05 5/16"06 3/8" GAS 06 3/8"08 1/2" GAS 08 1/2"10 5/8" GAS 10 5/8"12 3/4" GAS 12 3/4"16 1" GAS 16 1"

    FilettoThread

    Øint. tubo DNpipe DN

    02 1/8" GAS 02 1/8"03 3/16" GAS 03 3/16"04 1/4" GAS 04 1/4"05 5/16" GAS 05 5/16"06 3/8" GAS 06 3/8"08 1/2" GAS 08 1/2"10 5/8" GAS 10 5/8"12 3/4" GAS 12 3/4"16 1" GAS 16 1"

    FilettoThread

    Øint. tubo DNpipe DN

    02 1/8" GAS 02 1/8"03 3/16" GAS 03 3/16"04 1/4" GAS 04 1/4"05 5/16" GAS 05 5/16"06 3/8" GAS 06 3/8"08 1/2" GAS 08 1/2"10 5/8" GAS 10 5/8"12 3/4" GAS 12 3/4"16 1" GAS 16 1"

    FilettoThread

    Øint. tubo DNpipe DN

    02 1/8" GAS 02 1/8"03 3/16" GAS 03 3/16"04 1/4" GAS 04 1/4"05 5/16" GAS 05 5/16"06 3/8" GAS 06 3/8"08 1/2" GAS 08 1/2"10 5/8" GAS 10 5/8"12 3/4" GAS 12 3/4"16 1" GAS 16 1"

    Øint. tubo DNpipe DN

    3/16" 5mm1/4" 6mm

    5/16" 8mm3/8" 10mm1/2" 12mm5/8" 16mm3/4" 20mm

    1" 25mm

    Øint. tubo DNpipe DN

    3/16" 5mm1/4" 6mm

    5/16" 8mm3/8" 10mm1/2" 12mm5/8" 16mm3/4" 20mm

    1" 25mm

    Øint. tubo DNpipe DN

    3/16" 5mm1/4" 6mm

    5/16" 8mm3/8" 10mm1/2" 12mm5/8" 16mm3/4" 20mm

    1" 25mm

    Raccordi a pressare Press fittings

    OCCHI A PRESSARE

    FEMMINA A PRESSARE GAS

    CURVA 45° A PRESSARE GAS

    MASCHIO A PRESSARE GAS

    CURVA 90° A PRESSARE GAS

    BOCCOLA PER TUBO R1AT

    BOCCOLA PER TUBO R2AT

    BOCCOLA PER TUBO R7

    651 OG

    651 FG

    651 C45G

    651 BR7

    651 MG

    651 C90G

    651 BR1T

    651 BR2T

  • 3

    forniture tecniche industriali industrial supply

    OLE

    OD

    INA

    MIC

    AH

    YD

    RA

    ULI

    C

    FilettoThread

    FilettoThread

    18 1/8" GAS 18 1/8" GAS14 1/4" GAS 14 1/4" GAS38 3/8" GAS 38 3/8" GAS12 1/2" GAS 12 1/2" GAS34 3/4" GAS 34 3/4" GAS1 1" GAS 1 1" GAS

    114 1" 1/4 GAS 114 1" 1/4 GAS112 1" 1/2 GAS 112 1" 1/2 GAS

    2 2" 2 2"

    Raccorderia filettata Threaded fittings

    NIPLES MASCHIO/MASCHIO GAS

    RIDUZIONE MASCHIO/MASCHIO GAS

    FilettoThread

    FilettoThread

    18 1/8" GAS 18 1/8" GAS14 1/4" GAS 14 1/4" GAS38 3/8" GAS 38 3/8" GAS12 1/2" GAS 12 1/2" GAS34 3/4" GAS 34 3/4" GAS1 1" GAS 1 1" GAS

    114 1" 1/4 GAS 114 1" 1/4 GAS112 1" 1/2 GAS 112 1" 1/2 GAS

    2 2" 2 2"

    FilettoThread

    FilettoThread

    18 1/8" GAS 18 1/8" GAS14 1/4" GAS 14 1/4" GAS38 3/8" GAS 38 3/8" GAS12 1/2" GAS 12 1/2" GAS34 3/4" GAS 34 3/4" GAS1 1" GAS 1 1" GAS

    114 1" 1/4 GAS 114 1" 1/4 GAS112 1" 1/2 GAS 112 1" 1/2 GAS

    2 2" 2 2"

    PROLUNGHE LUNGHE DI RIDUZIONE FEM./MAS. GAS

    PROLUNGHE CORTE DI RIDUZIONE FEM./MAS. GAS

    Øint. tubo DNpipe DN

    18 1/8" GAS14 1/4" GAS38 3/8" GAS12 1/2" GAS34 3/4" GAS1 1" GAS

    114 1" 1/4 GAS112 1" 1/2 GAS

    2 2"

    FilettoThread

    FilettoThread

    18 1/8" GAS 18 1/8" GAS14 1/4" GAS 14 1/4" GAS38 3/8" GAS 38 3/8" GAS12 1/2" GAS 12 1/2" GAS34 3/4" GAS 34 3/4" GAS1 1" GAS 1 1" GAS

    114 1" 1/4 GAS 114 1" 1/4 GAS112 1" 1/2 GAS 112 1" 1/2 GAS

    2 2" 2 2"

    TAPPO MASCHIO TESTA ESAGONALE GA

    TAPPI DI RIDUZIONE MASCHIO/FEMMINA

    Øint. tubo DNpipe DN

    18 1/8" GAS14 1/4" GAS38 3/8" GAS12 1/2" GAS34 3/4" GAS1 1" GAS

    114 1" 1/4 GAS112 1" 1/2 GAS

    2 2"

    651 GIG

    651 PCG

    651 RMN

    651 RIG

    651 PLG

    651 TMG

  • 4

    forniture tecniche industriali industrial supply

    OLE

    OD

    INA

    MIC

    AH

    YD

    RA

    ULI

    C

    FilettoThread

    FilettoThread

    18 1/8" GAS14 1/4" GAS38 3/8" GAS12 1/2" GAS34 3/4" GAS

    10X14X1.5 10mmX14mm SP. 1,5mm10X16X1.5 10mmX16mm SP. 1,5mm16X20X1.5 16mmX20mm SP. 1,5mm18X24X1.5 18mmX24mm SP. 1,5mm

    COLLARE SEMPLICE

    COLLARE DOPPIO

    RONDELLE DI RAME GAS E METRICHE

    RUBINETTO ALTA PRESSIONE 2VIE

    RONDELLE BONDED GAS E METRICHE

    RUBINETTO ALTA PRESSIONE 3VIE

    Øint. tubo DNpipe DN

    18 1/8" GAS14 1/4" GAS38 3/8" GAS12 1/2" GAS34 3/4" GAS1 1" GAS

    114 1" 1/4 GAS112 1" 1/2 GAS

    2 2"

    Øint. tubo DNpipe DN

    18 1/8" GAS14 1/4" GAS38 3/8" GAS12 1/2" GAS34 3/4" GAS1 1" GAS

    114 1" 1/4 GAS112 1" 1/2 GAS

    2 2"

    Øint. tubo DNpipe DN

    18 1/8" GAS14 1/4" GAS38 3/8" GAS12 1/2" GAS34 3/4" GAS1 1" GAS

    114 1" 1/4 GAS112 1" 1/2 GAS

    2 2"

    Accessori Accessories

    651 RUB2AP

    651 RR

    651 CS PIPSV

    651 CS PIPSV

    651 RUB3AP

    651 RR

  • 5

    forniture tecniche industriali industrial supply

    OLE

    OD

    INA

    MIC

    AH

    YD

    RA

    ULI

    C

    Raccordi DIN 2353Ring fittings DIN 2353

    Innesti rapidiQuick couplings

    Raccordi a pressareHydraulic fittings

    AdattatoriAdaptors

    Raccordi ad anello per alte pressioniRing fittings for high pressures

    A faccia piana, a fubghetto e sfera, piastre multinnestiFlat face, poppet and ball, multicouplings

    Prodotti seguendo tutte le specifiche internazionali: BSP, SAE, JIC, JIS, DIN, NPTF, NPSM, ORFSProduced according to all the international specifications: BSP, SAE, JIC, JIS, DIN, NPTF, NPSM, ORFS

    Secondo le specifiche JIC, BSP, ORFS, DINAccording to the JIC, BSP, ORFS, DIN specifications

  • 6

    Tubi trecciati alta pressione Tensile steel braid hoses

    EN 853 1SN - SAE 100 R1AT

    EN 853 2SN - SAE 100 R2AT

    EN 853 1SN DN** - WP *** BAR - SAE 100 R1AT */*” - *Q**

    Fittings: STANDARD TYPEApplicazioni: Linee idrauliche a bassa e media pressione, linee di ritornoApplications: Low and medium pressure hydraulic lines, return linesSottostrato: Gomma sintetica resistente agli oliiTube: Synthetic rubber, oil resistantRinforzo: Una treccia di acciaio ad alta resistenzaReinforcement: One high tensile steel braidCopertura: Gomma sintetica resistente agli olii e agli agenti atmosfericiCovering: Oils and weather resistant synthetic rubberTemperatura d’esercizio: Olii idraulici da -40°C a +100°C, intermittente +125°C. Acqua da 0°C a +70°C. Aria fino a +70°C.Working temperature: Hydraulics oils from -40°C to +100°C, intermittent +125°C. Water from 0°C to +70°C. Air up to +70°C.Norme di riferimento: Applicable Standard: EN 853 1SN -SAE J517 100 R1 AT

    Code[in] size [mm]

    3/16" 03 4,81/4" 04 6,45/16" 05 7,93/8" 06 9,51/2" 08 12,75/8" 10 15,93/4" 12 19,01" 16 25,4

    1.1/4" 20 31,81.1/2" 24 38,1

    [mm] Working Pr. Burst Pr. Bend Radius [mm] Kg/Mt

    11,7 0,18

    18

    013 0,226

    25022 00

    100 00

    0

    0

    10014,6 0,26017,2 0,340

    215

    5

    5

    180860720

    115130

    020,3 0,41523,9 0,480

    160013 20

    64200

    27,6 0,59035,4 0,885300

    10588 352

    42 40

    43,9 1,22550 1,415500

    4206350 200

    252

    2

    99651R1AT316

    651R1AT14651R1AT516651R1AT38651R1AT12651R1AT58651R1AT34651R1AT01651R1AT114651R1AT112

    Dimension Pressure [bar] Bending Weight

    Hose size OD Max Min Min

    DimensionP ressure [bar]B ending Weight

    Code[in] size [mm]

    3/16" 03 4,81/4" 04 6,45/16" 05 7,93/8" 06 9,51/2" 08 12,75/8" 10 15,93/4" 12 19,01" 16 25,4

    1.1/4" 20 31,81.1/2" 24 38,1

    [mm] Working Pr. Burst Pr. Bend Radius [mm] Kg/Mt

    651R2AT316651R2AT14651R2AT516651R2AT38651R2AT12651R2AT58651R2AT34651R2AT01651R2AT114651R2AT112

    Dimension Pressure [bar] Bending Weight

    Hose size OD Max Min Min

    13,3 0,30014,6 0,385

    90100

    16601600

    415400

    16,2 0,43518,6 0,550

    115130

    14001320

    350330

    21,4 0,65025 0,760

    180200

    11001000

    275250

    29,2 0,94036,5 1,315

    240300

    860660

    215165

    45 1,92051,4 2,145

    420500

    500360

    12590

    EN 853 2SN DN** - WP *** BAR - SAE 100 R2AT */*” - *Q**

    Fittings: STANDARD TYPEApplicazioni: Linee idrauliche ad alta pressioneApplications: High pressure hydraulic linesSottostrato: Gomma sintetica resistente agli oliiTube: Synthetic rubber, oil resistantRinforzo: Due trecce di acciaio ad alta resistenzaReinforcement: Two high tensile steel braidsCopertura: Gomma sintetica resistente agli olii e agli agenti atmosfericiCovering: Oils and weather resistant synthetic rubberTemperatura d’esercizio: Olii idraulici da -40°C a +100°C, intermittente +125°C. Acqua da 0°C a +70°C. Aria fino a +70°C.Working temperature: Hydraulics oils from -40°C to +100°C, intermittent +125°C. Water from 0°C to +70°C. Air up to +70°C.Norme di riferimento: Applicable Standard: EN 853 2SN -SAE J517 100 R2 AT

    forniture tecniche industriali industrial supply

    OLE

    OD

    INA

    MIC

    AH

    YD

    RA

    ULI

    C

  • 7

    forniture tecniche industriali industrial supply

    OLE

    OD

    INA

    MIC

    AH

    YD

    RA

    ULI

    C

    Tubi trecciati alta pressione Tensile steel braid hoses

    EN 857 2SCSAE 100 R16

    WASH BLUEHIGH PRESSURE 155°C

    EN 857 2SC DN** - WP *** BAR - *Q**

    SUPERSERVICE 2SC DN** WP *** BAR 155°C *Q**

    Fittings: STANDARD TYPEApplicazioni: Linee idrauliche ad alta pressioneApplications: High pressure hydraulic linesSottostrato: Gomma sintetica resistente agli oliiTube: Synthetic rubber, oil resistantRinforzo: Due trecce di acciaio ad alta resistenzaReinforcement: Two high tensile steel braidsCopertura: Gomma sintetica resistente agli olii e agli agenti atmosfericiCovering: Oils and weather resistant synthetic rubberTemperatura d’esercizio: Olii idraulici da -40°C a +100°C, intermittente +125°C. Acqua da 0°C a +70°C. Aria fino a +70°C.Working temperature: Hydraulics oils from -40°C to +100°C, intermittent +125°C. Water from 0°C to +70°C. Air up to +70°C.Norme di riferimento: Applicable Standard:

    Fittings: STANDARD TYPEApplicazioni: Sistemi di lavaggio ad alta pressione con acqua fredda e caldaApplications: High pressure cleaning system for cold and hot waterSottostrato: Gomma sintetica resistente all’acquaTube: Synthetic rubber, water resistantRinforzo: Due trecce di acciaio ad alta resistenzaReinforcement: Two high tensile steel braidsCopertura: Gomma sintetica Blu resistente alle abrasioni, agli olii e agli agenti atmosfericiCovering: Oils, weather and abrasion resistant synthetic Blue rubberTemperatura d’esercizio: Acqua da -40°C a +155°C intermittentiWorking temperature: Water from -40°C to +155°C intermittentNorme di riferimento: Applicable Standard:

    DISPONIBILI RACCORDI E MANOPOLE, CONSULTARE IL CATALOGO AVAILABLE FITTINGS AND HANDGRIP, CONSULT THE CATALOGUE

    EN 857 2SC -SAE J517 100 R16

    dimensions according EN 857 2SC

    DimensionP ressure [bar]B ending Weight

    Code[in] size [mm]

    1/4" 045/16" 053/8" 061/2" 085/8" 103/4" 121" 16

    [mm] Working Pr. Burst Pr. Bend Radius [mm] Kg/Mt

    651FORT14651FORT516651FORT38651FORT12651FORT58651FORT34651FORT01

    Dimension Pressure [bar] Bending Weight

    Hose size OD Max Min Min

    14,6 160040016,218,6

    14001320

    350330

    21,425

    11001000

    275250

    29,236,5

    860660

    215165

    0,2860,330

    7585

    0,4190,538

    90130

    0,6480,782

    170200

    1,134250

    6,47,99,512,715,919,025,4

    DimensionP ressure [bar]B ending WeightCode

    [in] size [mm]

    1/4" 045/16" 053/8" 061/2" 08

    [mm] Working Pr. Burst Pr. Bend Radius [mm]Kg/Mt

    651IDW2LW14651IDW2LW516651IDW2LW38651IDW2LW12

    Dimension Pressure [bar] Bending Weight

    Hose size OD Max Min Min

    1600160016001600

    404040

    000

    275

    758590

    130

    6,47,99,512,7

    17,721

    13,915,4

    0,2800,360

    0,1900,220

  • 8

    Tubi termoplastici Thermoplastic hoses

    SAE 100 R7

    SAE 100 R8

    Fittings: STANDARD TYPEApplicazioni: Linee idrauliche a media pressioneApplications: Medium pressure hydraulic linesSottostrato: Poliestere termoplasticoTube: Thermoplastic polyesterRinforzo: Fibra in poliestereReinforcement: Polyester fiberCopertura: Poliuretano antiabrasione, a richiesta microperforatoCovering: Antiabrasion polyurethane, on request it is also available micro perforatedTemperatura d’esercizio: Olii idraulici da -40°C a +100°C. Acqua da 0°C a +70°C. Aria fino a +70°C.Working temperature: Hydraulics oils from -40°C to +100°C. Water from 0°C to +70°C.. Air up to +70°C.Norme di riferimento: Applicable Standard: SAE J517 100 R7 - EN 855 R7 - ISO 3949

    Fittings: STANDARD TYPEApplicazioni: Linee idrauliche ad alta pressioneApplications: High pressure hydraulic linesSottostrato: Poliestere termoplasticoTube: Thermoplastic polyesterRinforzo: Fibre tessili ad alta tenacitàReinforcement: High tenacity textile fibersCopertura: Poliuretano antiabrasione, a richiesta microperforatoCovering: Antiabrasion polyurethane, on request it is also available micro perforatedTemperatura d’esercizio: Olii idraulici da -40°C a +100°C. Acqua da 0°C a +70°C. Aria fino a +70°C.Working temperature: Hydraulics oils from -40°C to +100°C. Water from 0°C to +70°C.. Air up to +70°C.Nota: Realizzabile anche nella versione binata o multiplaNote: Realizable in twin and multiple versionNorme di riferimento: Applicable Standard: SAE J517 100 R8 - EN 855 R8 - ISO 3949

    forniture tecniche industriali industrial supply

    OLE

    OD

    INA

    MIC

    AH

    YD

    RA

    ULI

    C

  • 9

    forniture tecniche industriali industrial supply

    OLE

    OD

    INA

    MIC

    AH

    YD

    RA

    ULI

    C

    Servizio raccordatura Service

    Dal 1999 abbiamo allestito all’interno della nostra azienda uno specifico settore dedicato alla raccordatura e collaudo di tubi oleodinamici da 20 a 1000 BAR. Il nostro impianto di pressatura, di produzione FINN POWER, ci consente di consegnare un prodotto con tutte le garanzie richieste. Il nostro intento è di proporre un servizio rapido e di alta qualità con possibilità di CONSEGNA IMMEDIATA.

    Since 1999, PLASTORGOMMA SERVICE has built a big sector to make our operators able to connect and to test hidraulic hoses from 20 to 1000 BAR. Our connection machine FINN POWER, give us the chance to supply a high warranty products. We propose a fast and high quality product with IMMEDIATELY DELIVERY.


Recommended