+ All Categories
Home > Documents > Hydrologic Modeling System HEC-HMSce531.groups.et.byu.net/syllabus/notes/HEC-HMSLecture.pdf ·...

Hydrologic Modeling System HEC-HMSce531.groups.et.byu.net/syllabus/notes/HEC-HMSLecture.pdf ·...

Date post: 27-Jul-2018
Category:
Upload: lequynh
View: 223 times
Download: 0 times
Share this document with a friend
20
Hydrologic Modeling System HEC-HMS
Transcript

Hydrologic Modeling SystemHEC-HMS

Model !! What is it ?

ProcessingInput Output

Known Unknown

RunoffPrecipitation Watershed properties

Hydrologic Models

Analog Models: Uses electricityPhysical Models: Constructed in Lab

Numerical Models: Phenomenon described by the set of mathematical equations

HEC-HMS is a numerical model

0

5

10

15

20

25

30

35

40

45

7/17

Date

Flow

(cm

s)

Model Categorization

Continuous and Event based models

Continuous simulates long term response of the watershed

AndEvent model simulates the

response to each event3 Month Recorded Flow

0

5

10

15

20

25

30

35

40

45

7/1

7/8

7/15

7/22

7/29 8/5

8/12

8/19

8/26 9/2

9/9

9/16

9/23

9/30

Date

Flow

(cm

s)

Continuous Simulation

Event Simulation

Model Categorization

Lumped, Quasi-distributed and Distributed

GSSHAHEC-HMS

Model Categorization

Deterministic and Stochastic

Empirical and ConceptualMeasured Parameter and Fitted Parameter

Constituents of Model

State variables

Parameters

Boundary Conditions

Initial Conditions

HEC-HMS Representation of Watershed

Typical HEC-HMS Representation

HEC-HMS and HEC-1

Both the models are developed by US Army Corps of

Engineers, Hydrologic Engineering Center (HEC)

HEC-HMS is the advanced version of HEC-1 model

HEC-1 is a lumped parameter hydrologic model

HEC-HMS is lumped + quasi-distributed model

HEC-HMS components

Basic componentsBasin ModelMeteorologic ModelControl Specification

Comprehensive modeling includes following components too

Time series dataPaired dataGrid Data

Desktop

Watershed Explorer

Component Editor

Message Log

WMS Interface for Preparing HMS Input file

Basin Model is generated from WMS watershed. And to input other basin characteristics

HEC-HMS | Edit Parameters

WMS Interface for Preparing HMS Input file

For control specification: HEC-HMS | Job Control

WMS Interface for Preparing HMS Input file

For Meteorologic ModelHEC-HMS | Meteorologic

Parameters

Running HEC-HMS

Save HEC-HMS file from WMS

Running HEC-HMS

Open the file saved in WMS it will create all the three components of HMS Model.

Viewing Results

Demonstration


Recommended