24
CONTENT PRODUCT DATA SHEETS INSTALLATION GUIDE MAINTENANCE GUIDE PRODUCT STUDY SHEET Hydropack ® Booklet www.vegetalid.com
CONTENT
Product data SheetSInStallatIon GuIdeMaIntenance GuIde
Product Study Sheet
Hydropack®
Booklet
www.vegetalid.com
www.vegetalid.com
HYDROPACK® GReen ROOf TRAY
Patented in 2000, hydroPacK® was the first green roof tray system to be launched in Europe. hydroPacK® is the only tray that contains all the components essential for the successful creation of an extensive green roof system. The all-in-one hydroPacK® tray comes complete with water reservoirs, mineral drainage, filter fabric, drainage holes, hooking system, growing media, and vegetation.
hydroPacK® vegetation is adapted for specific climate zones, exposure to sunlight, and design intent, and there are 3 different plant mix options to choose from.
HP VeGeTATIOn STORMWATeR
MAnAGeMenT
BIODIVeRSITY MAInTenAnCe LAnDSCAPe
DeSIGn
hydroPacK® Standard Plant Mix
hydroPacK® accent Plant addition
hydroPacK® custom Planting
HYDROPACK® Standard Plant Mix HYDROPACK® Accent Plant Addition HYDROPACK® Custom Planting
Product Line hP VeGetatIon
We maintain a stock of hydroPacK® Standard Plant mix ready-to-ship and fully established. The Standard Plant Mix and Accent Addition are available for the following states: AL, AR, BC, CA (northern), CT, DC, DE, GA, IA, IL, IN, KY, LA, MA, ME, MI, MN, MO, MS, NC, NH, NJ, NY, OH, ON, OR (western), PA, QC, RI, SC, TN, VA, VT, WA (western), WI, WV, VA. Lead time for Custom Planting is about 12 weeks during the growing season.
Very large nursery
www.vegetalid.com
CHARACTeRISTICS Imperial Metric
dimensions per unit 2 ft. x 1.3 ft. x 3.6 inch. 60 cm x 40 cm x 9 cm
tray material black 100% recycled HDPE from cap bottles
Water reservoir depth 1.2 inch. 3 cm
Filter fabric Non-woven 3 oz. per sq. ft. 100 gr. per m2
Growing media FLL compliant
drainage clearance 1.2 inch. 3 cm
number of drainage holes 47 holes (Ø 3/8’’) per sq. ft. 500 holes (Ø 9 mm) per m2
Water reserve 1/5 gal. per sq. ft. 8 L per m2
Max. water retention capacity 3/5 gal. per sq. ft. 28 L per m2
Max. weight per tray 45 lbs 21 kg
dry weight 11.5 lbs. per sq. ft. 56 kg per m2
Fully saturated max. weight 18 lbs. per sq. ft. 85 kg per m2
Installation time 3 h per truck load with 4 people (3,120 sq. ft. or 290 m2)
The way that hydroPacK® is packaged makes it easy and fast to install. The trays are stacked on top of each other on standard pallets. This enables us to get more square footage of our product on one truck than any of our competitors!
One pallet: 156-166 sq. ft., 60-64 trays (14.4-15.4 m2) One Truck load: 3,120-3,320 sq. ft., 1,200-1,280 trays (288-308 m2) We can transport hydroPacK® on dry vans, temperature controlled reefer trucks or flat beds – whichever suits you best.
hydroPacK® comes with a strong hooking system which protects it from being uplifted by the wind, and provides pathways for water and nutrients.
hydroPacK® can be installed on flat and pitched roofs (even very steep ones).hydroPacK® has integrated edges with a filter fabric to retain the growing media. Aluminum edges
are not required when creating vegetation-free zones on flat roofs.
Compression study for steep applications
HYDROPACK® packaging
HYDROPACK® ‘s strong hooking system
HYDROPACK® long side view
HYDROPACK® top view
HYDROPACK® small side view
2 ft.
1.3 ft.
3.6’’
1.2’’
CLEa
NiN
gST
aN
Da
RD
PL
aN
T M
iXa
CCEN
T PL
aN
T a
DD
iTiO
NCU
STO
M P
La
NTi
Ng
APPLICATIOnS Full sun to partial shade
Flat and Pitched roofs
Extensive green roofs
ADVAnTAGeS Very little maintenance
Stock always available, no delay, and no down payment when you order
High biodiversity plant mix
95-100% fully grown when delivered
Homogenous Organic-Meadow vegetation
HYDROPACK® STANDARDLow maintenance plant mix with high biodiversity
hydroPacK® standard plant list: Antennaria dioica; Armeria maritima; Campanula rotundifolia; Cymbalaria muralis (linaria cymbalaria); Dianthus areenarius; Dianthus carthusianorum; Dianthus deltoides ‘brilliant’; Gypsophila repens; Hieracium aurantiaum; Hieracium pilosella; Petrorhagia saxifraga; Saponaria ocymoides; Saxifraga granulata; Saxifrage mixture; Sedum acre ‘aureum’; Sedum acre ‘oktoberfest’; Sedum aizoon ‘euphorbiodes’; Sedum album ‘murale’; Sedum album ‘chloroticum’; Sedum album ‘coral carpet’ ; Sedum Ellacombianum; Sedum Floriferum weihenstehaner gold; Sedum hybridum ‘czar’s gold’; Sedum hispanicum; Sedum montanum; Sedum oreganum; Sedum pulchellum ; Sedum Reflexum blue spruce; Sedum rupestre ‘angelina’; Sedum sexangulare ; Sedum spurium ‘john creech’; Sedum Spurium ‘elizabeth’; Sedum telephium fabaria; Thymus pulegioides; Thymus serpyllum hort.
HYDROPACK® standard plant mix in the spring
Available for these states: AL, AR, BC, CA (northern), CT, DC, DE, GA, IA, IL, IN, KY, LA, MA, ME, MI, MN, MO, MS, NC, NH, NJ, NY, OH, ON, OR (western), PA, QC, RI, SC, TN, VA, VT, WA (western), WI, WV, VA.
HYDROPACK® standard plant mix fieldsHYDROPACK® organic vegetation aspect
HYDROPACK® standard plant mix in the winter
HYDROPACK® standard plant mix in the summer
STa
ND
aR
D P
La
NT
MiX
Vegetal I.D. Inc. 7939 Bank St. Rd Batavia NY 14020 USA Tel 585-343-6400 Fax 585-343-6401 Mail [email protected]
HYDROPACK® standard plant mix availability
Examples of plants included in the HYDROPACK® Standard Plant Mix
gR
OU
ND
CO
vER
aC
CEN
T
HYDROPACK® STANDARDLow maintenance plant mix with high biodiversity
CLEa
NiN
gST
aN
Da
RD
PL
aN
T M
iXa
CCEN
T PL
aN
T a
DD
iTiO
NCU
STO
M P
La
NTi
Ng
APPLICATIOnSFull sun to partial shade
Flat and Pitched roofs
Extensive green roofs
ADVAnTAGeSVery little maintenance
3 options: culinary herbs, natives or aestheticHigh biodiversity plant mix
95-100% fully grown when delivered
Basic Landscape Design vegetation
IMPLeMenTATIOnInstall hydroPacK® standard plant mix trays.
Plant the plugs shipped with the hydroPacK® according to your personal design (or your landscape architect’s layout).
Use the special Vegetal i.d. tool to plant the plugs at a 45 degree angle in the hydroPacK® growing media.
Water the green roof until the hydroPacK®
reservoirs are full.
HYDROPACK® ACCENTLandscape design that’s easy to implement
hydroPacK® accent plant addition is a low maintenance ground cover mix combined with a wide variety of plugs for pursuing different design intent:
Aesthetic, when you want to provide a variety of accented patches of color Culinary herbs, when you want to add more chives and thyme for potential harvesting Natives, when you want guaranteed year-round cover by cultivating a variety of native plants on your roof.
Available for these states: AL, AR, BC, CA (northern), CT, DC, DE, GA, IA, IL, IN, KY, LA, MA, ME, MI, MN, MO, MS, NC, NH, NJ, NY, OH, ON, OR (western), PA, QC, RI, SC, TN, VA, VT, WA (western), WI, WV, VA.
Find our Plant Selection Tool on our website: www.vegetalid.com
HYDROPACK® fieldsHYDROPACK® accent plant addition
aCC
ENT
PLa
NT
aD
DiT
iON
HYDROPACK® accent plant implementation
Vegetal I.D. Inc. 7939 Bank St. Rd Batavia NY 14020 USA Tel 585-343-6400 Fax 585-343-6401 Mail [email protected]
HYDROPACK® accent plant addition availability
aC
CEN
T P
La
NT
OP
TiO
Ng
RO
UN
D C
Ov
ER
Examples of plants available with the HYDROPACK® accent plant addition option
HYDROPACK® ACCENTMore landscape design for an easy implementation
CLEa
NiN
gST
aN
Da
RD
PL
aN
T M
iXa
CCEN
T PL
aN
T a
DD
iTiO
NCU
STO
M P
La
NTi
Ng
APPLICATIOnS Full sun to shade
Flat and pitched roofs
Extensive green roofs
ADVAnTAGeS Very flexible
High aesthetic value
High potential biodiversity plant mix
95-100% fully grown when delivered
Variegated Landscape Design vegetation
HYDROPACK® CUSTOMOffering you the most flexible choice of plants
hydroPacK® custom planting is our most flexible option. Go to www.vegetalid.com and log in to our Plant Selection Tool to find the vegetation you’d like to use for your project. Validate the plant list with Vegetal i.d. before making your specification.
HYDROPACK® custom planting example
Available throughout North America
About 12 weeks’ lead time to deliver
HYDROPACK® fieldHYDROPACK® custom planting
CUST
OM
PL
aN
TiN
g
HYDROPACK® custom planting example HYDROPACK® custom planting example
Vegetal I.D. Inc. 7939 Bank St. Rd Batavia NY 14020 USA Tel 585-343-6400 Fax 585-343-6401 Mail [email protected]
HYDROPACK® custom planting availability
Examples of plants available with the HYDROPACK® custom planting option
aC
CEN
T P
La
NTS
gR
OU
ND
CO
vER
HYDROPACK® CUSTOMOffering you the most flexible choice of plants
www.vegetalid.com
HYDROPACK® InSTALLATIOn
This booklet is an easy-to-follow, step-by-step guide to installing hydroPacK®. Please read it carefully before you schedule and organize the installation.
Disclaimer: The contractor is responsible for the quality of every hydroPacK® installation. Care should be taken to avoid damaging the waterproofing membrane and the plants, both before and during the installation.
hydroPacK® size: 24 x 15.6 inches (2’ x 1.3’)
Layout of Vegetation-Free Zone Vegetation-Free Zone profile
HYDROPACK® on a conventional roof assembly
CLEa
NiN
g
ACTIOnS Please contact Vegetal i.d. 2 weeks before the installation to schedule the delivery time, confirm the number of trays, and specify the type of truck required for the job.
Read the architect’s specifications to find out which protection fabric you need to protect the waterproofing membrane.
Before installing the modules, inspect the waterproofing surface to ensure that it is watertight. This will require a flood test (the controlled flooding of the entire roof with no less than 2 inches of standing water).
The surface of the waterproofing membrane should be swept and washed.
While the protective fabric is being put into place, no other activity should be carried out on the roof.
HYDROPACK® being packed onto pallets
The Vegetal i.d. team can provide you with support for your green roof design, including CAD drawings, selection of plants, installation, and maintenance. Don’t hesitate to give us a call if you have any questions. Tel: 585-343-6400.
Is this your first hydroPacK® installation? Give us a call, we will come to guide your team and make it a successful experience!
Inspection of the membrane and the protection fabric
HYDROPACK® PREPARATION
hydroPacK®’s packaging makes it easy and fast to install. The trays are stacked on top of each other on a standard pallet. Per truckload, we can transport more square footage of our product than any of our competitors!
One pallet: 156-166 sq. ft., 60-64 trays (14.4- 15.4 m2)
One Truck load: 3,120-3,320 sq. ft., 1,200-1,280 trays (288-308 m2)
We use dry vans, temperature controlled reefer trucks and flat beds – simply tell us which is most convenient for you
Vegetal I.D. Inc. 7939 Bank St. Rd Batavia NY 14020 USA Tel 585-343-6400 Fax 585-343-6401 Mail [email protected]
TOOLS neeDeD Pallet Jack
Forklift/Bobcat with forks, or a crane (if shipped on a flat bed)
Lifting device for lifting the pallets onto the roof
ACTIOnS Unload the pallets and place them in the shade to protect the vegetation from direct sunlight.
Be ready to install hydroPacK® on the day of delivery.
Each pallet weighs about 2,200 lbs.
Lift the hydroPacK® pallet to the roof without putting it down. If you‘re using a crane, protect the roof before lowering the pallet, and make sure that the roof is strong enough to take the weight.
Lift the pallets as close as possible to the place where they are going to be installed.
hydroPacK® is packaged on pallets rather than racks. This allows trucks to leave as soon as they have been unloaded, and simplifies site management.
Lifting the HYDROPACK® pallet onto the roof
HYDROPACK® pallet on the roofHYDROPACK® pallet lifted by crane
You can change the delivery time, but no later than 48 hours before the merchandise leaves the nursery.
If the trays cannot be installed the same day, contact Vegetal i.d. for instructions.
Unloading 1truck
40 min
2
HYDROPACK® RECEPTION
CLEa
NiN
g
TOOLS neeDeD
Gloves for each crew member
3 Knives or 3 pairs of scissors
1 Wheelbarrow
1 Chalk Line
1 Circular saw or reciprocating saw
1 Shovel
ACTIOnS Roll out the Root Barrier and/or protection fabric over the waterproofing membrane (consult the waterproofing manufacturer’s recommendations)
Overlap the sheets by a minimum of 2 inches.
Take 2 empty hydroPacK® trays and place them at one corner of the roof. This will allow you to visualize the sequence you will follow when arranging the rest of the trays. The order should always be from left to right.
Remember: for most specifications you will need to create a Vegetation-free Zone along the perimeter of the roof and around any rooftop equipment. Measure the width of the vegetation-free zone and draw a straight line with the chalk line to mark out the edges from where you will start installing the trays.
In some cases you may find it necessary to cut hydroPacK®. If so, empty the tray using the filter fabric to lift the soil. Cut the tray with a circular saw/knife or reciprocating saw. Position the tray with the remaining edges facing outward. Cut the soil and plants with a knife and replace them in the tray.
When all the trays are installed, fill the space around the perimeter with gravel ballast. Use the wheelbarrow to move the gravel around the roof, and use the shovel to spread it.
hydroPacK® saves you money because it allows you to create vegetation-free zones without the need for aluminum edges. And, because hydroPacK®’s All-in-One system already includes drainage water reservoirs and filter cloth, you save time on installation as well.
Visualization of the positioning
HYDROPACK® installation
installation
5 min
Vegetation-free zone
4
HYDROPACK® INSTALLATION
1pallet
Vegetal I.D. Inc. 7939 Bank St. Rd Batavia NY 14020 USA Tel 585-343-6400 Fax 585-343-6401 Mail [email protected]
TOOLS neeDeD Gloves
ACTIOnS Hold the hydroPacK® tray with the female hooks facing you.
Position the tray adjacent to the trays already in place.
Holding the tray by the top right hand and bottom left hand corners; lift them ½’’.
Slide the male hooks down into the female hooks.
If the hooks don’t slide in all the way use your foot to press them into place.
hydroPacK® is the only tray with a hooking system designed to allow water and nutrients to circulate efficiently.
The strong hooking system also protects the trays from being uplifted by the wind.
Hooking HYDROPACK® trays
We recommend that only 2 crew members hook the trays and the others passing them along.
HYDROPACK®’s hooking system is a pathway
Male hook on the left; Female hook on the right
2 crew members hook, 2 crew member bring the trays
HYDROPACK® HOOKING
Vegetal I.D. Inc. 7939 Bank St. Road Batavia NY 14020 USA Tel 585-343-6400 Fax 585-343-6401 Mail [email protected]
HYDROPACK® CUTTING
TOOLS neeDeD 1 Circular saw or reciprocating saw
ACTIOnS In some cases you may find it necessary to cut hydroPacK®. If so, empty the tray using the filter fabric to lift the soil. Cut the plastic tray with a circular saw/knife or reciprocating saw. Position the tray with the remaining edges facing outward. Cut the soil and plants with a knife and place them back into the tray.
hydroPacK® can be cut easily to fit odd dimensions and angles.
We recommend emptying the tray before cutting the plastic
Placing the tray with edges facing outward
Cutting the plastic tray
Placing the mineral drainage back into the reservoirsCutting the vegetation and soil with a knife
Emptying the tray
CLEa
NiN
g
TOOLS neeDeD Broom
ACTIOnS: Remove all equipment, debris and pallets from the roof.
Use left-over growing media and plants to fill in bare spots, if any.
Sweep the vegetation-free zone if you have installed pavers.
Make sure that nobody comes to work on the roof after installation. The vegetation will die off if it is walked on too often.
hydroPacK® is very fast and easy to install!
After the plants have been installed, do not allow any construction traffic on the roof. If post-installation construction activity is unavoidable, please consult us before you start.
Sweeping the vegetation-free zones
Total installation
3 h
4
HYDROPACK® CLEANING
1truck
Vegetal I.D. Inc. 7939 Bank St. Rd Batavia NY 14020 USA Tel 585-343-6400 Fax 585-343-6401 Mail [email protected]
TOOLS neeDeD Irrigation supply: hose, tripod sprinklers
Irrigation timer
ACTIOnS Position hoses and overhead sprinklers so that they provide optimum coverage of the vegetated area of the roof.
Program the irrigation for 30 minutes.
Check the hydroPacK® reservoirs in differ-ent places to make sure they are full of water, if they are not, water for a little longer. To check the water level in the reservoirs, lift the filter cloth in the tray.
For the first year, the vegetation will need to adapt to its new environment. We recommend that you water during the summer (July-August), once a week for 30 minutes.
After the first year, water only during periods of drought: > 90 °F (32 °C) with less than 0.6’’ rainfall (15 mm) for 20 consecutive days and above 98 °F.
hydroPacK® is very cleverly designed! The water reservoirs retain a huge amount of water and owners can see at a glance when it’s time to water.
Low water reservoir
If you’re planning to install a permanent irrigation system, we recommend overhead irrigation for flat roofs and drip irriga-tion for pitched roofs.
Watering after installation – this small sprinkler must be repositioned to ensure that the entire roof receives the correct amount of water.
Watering
30 min
1
Dry water reservoir Full water reservoir
Permanent overhead irrigation
HYDROPACK® WATERING
1 roof
www.vegetalid.com
HYDROPACK® MAInTenAnCe
TOOLS neeDeD Bucket
Knife, gloves, small shovel
Hand spreader (we recommend the 3100 Professional Hand Crank Spreader from Earthway)
Slow release fertilizer – organic or inorganic.
Irrigation supply
ACTIOnS The first visit should occur 1 month after installation to verify that the vegetation is properly established.
Ideal maintenance for a Standard Plant Mix is 4 times a year.
During extended periods of drought plants may suffer. At such times it is advisable to install a
hydroPacK® is very easy to maintain because it is delivered to the roof with the vegetation already fully established.
We recommend 4 maintenance sessions per year for hydroPacK® standard plant mix. Consult us to find out which fertilizer is best for you.
In order to qualify for Vegetal i.d’s 2-year plant warranty you must purchase a maintenance contract with a registered green roof expert .
hydroPacK® requires little maintenance; however, maintenance is very important, and the success of your green roof will depend on it.
temporary irrigation system. Irrigation is required for a period of 20 days or more, with less than 0.6” of cumu-lative rainfall and temperatures above 98°F. Under these conditions you should water for 30 minutes once a week until the weather improves.
Actions JAn feB MAR APR MAY JUn JUL AUG SeP OCT nOV DeC
Weeding
Plant health
Watering
repair
Fertilizing
drain inspection
Gabage removal
visit
30 min
1
3,000 ft2
CLEa
NiN
g
ACTIOnSWeeDInG
Weed before the plants go to seed (for most weeds this means mid-spring to summer, depending on weather conditions). You can walk on the vegetation, but gently and not often. Pull out the weeds from the base. Pull out the entire root and put them in a plastic bag to prevent the seeds from spreading.
Fill in any bare patches with sedum cuttings from surrounding plants.
Remember that watering your green roof will increase weed pressure. If you water your roof frequently, you’ll need to weed more often (once a month). Too much irrigation will promote high weed pressure, so manage your irrigation with care.
Don’t use any chemical weed control products without first consulting Vegetal i.d.
Plant Health Inspection
Inspect the plants and take notes to send to Vegetal i.d. (field note sheet provided)
How many different types of plants do you see?
How many different types of weeds?
What is the estimated plant cover?
Do you see any insects or wildlife?
Vegetal i.d. will provide you with a method for calculating the Plant Health Rate of your project.
Provide pictures at least twice a year, and during the installation. Take a few overall pictures and a few pic-tures of areas where vegetation is not doing so well. Email your pictures, with the field note sheet, to [email protected] the same week. You must do this in order to continue to qualify for your plant war-ranty.
Scrape off the growing media Bare spot
Place cuttings Cover with growing media
Weeds that you may find on your green roof
HYDROPACK® MAINTENANCE
DeTAILeD MAInTenAnCe PROGRAM
Valid for zones 3-8. Outside these zones contact the Vegetal i.d. team for advice.
Vegetal I.D. Inc. 7939 Bank St. Rd Batavia NY 14020 USA Tel 585-343-6400 Fax 585-343-6401 Mail [email protected]
ACTIOnSfertilizing
To ensure prolific blooming and a highly visible roof, apply fertilizer each spring; otherwise, every 2 years, in the spring.
Use a hand spreader (the 3100 Professional Hand Crank Spreader from Earhtway), and be sure to wear a mask, gloves and eye protection.
Follow the fertilizer manufacturer’s instructions. We usually recommend a slow (18-month) fertilizer (18,6,12), but it really depends on the needs of the plants and the climate conditions. Please consult us for a detailed fertilization program. Water for 30 minutes after each application.
You’ll begin to see the effect on the plants after about three weeks.
Watering
We don’t recommend that you install a permanent irrigation system unless you have a pitched roof, or live in a region where droughts are common.
Watering is important after installation and throughout the first summer. A temporary irrigation system is suf-ficient, using tripod stand sprinklers.
In long periods of drought you should water the roof until the water reservoirs are full. It usually takes about 30 minutes with a water pressure of 35 psi. The definition of a long period of drought is 20 consecutive days with less than 0.6’’ of cumulative rainfall. At temperatures above 98°F, water for 30 minutes once a week.
If you have bare spots on your roof, water them every week until the plants grow back.
For irrigation supplies and advice please contact Vegetal i.d.
If you plan to install permanent irrigation, contact Vegetal i.d. for approval of the layout and the system itself. We provide laid out, ready-to-install kits that include weather stations, controller, connections, sprinklers and pipes.
Fertilization equipmentLack of Fertilization
Leaves covering the plants
Water controller
Irrigation connections
Weather station
Automated valves
HYDROPACK® MAINTENANCE
Cleaning the drains
Remove roots, vegetation, and any signs of moss appearing in the roof drains.
Remove Trash and Leaves
Pick up any leaves and trash that have fallen onto the vegetation.
Valid for zones 3-8. Outside these zones contact the Vegetal i.d. team for advice.
www.vegetalid.com
DATe name Company Address Phone/email
MAInTenAnCe fIeLD nOTeS
MAInTenAnCe Check Observation
Plant health inspection
Weeding
Vegetation replacement
Fertilization
drain inspection and cleaning
Garbage removal
Watering
Plant coverage (Percent)
number of plant varieties
number of different weeds
Insect or wildlife
Provide pictures at least twice a year. Take a few overall pictures and pictures of areas where the vegetation isn’t doing very well. Email the pictures and the field note sheet to [email protected] the same week. You must do this in order to continue to qualify for your plant warranty.
www.vegetalid.com
nOW enJOY YOUR HYDROPACK® GReen ROOf !
fOR MORe InfORMATIOn:
P 585-343-6400
f 585-343-6401
WWW.VeGeTALID.COM
GET A QUOTE WITHIN 2 BUSINESS DAYS
REQUIRED INFORMATION*: Product*:
□Hydropack Standard Plant Mix □Hydropack Accent Plants □Hydropack Custom Planting Project address*: Name*:
City*: Zip code*:
Anticipated date of installation*:
Total roof surface area to vegetate*: square feet
What truck do you need*? □Dry Van ($) □ Flat Bed ($$) □ Side Curtains Truck ($$$)
COMPLEMENTARY INFORMATION TO DESIGN YOUR PROJECT: You don’t have all the information? No problem, our team will assist you to refine your project study.
DESCRIPTION OF THE PROJECT: Type of building:
□ Residential □ Commercial □ Governmental □ Educational □ Industrial □ Military □ Agricultural □ Religious □ Transit Stations Design Intent (2 max.): □ Low Maintenance □ Storm water management □ Accessible Garden Roof □ Habitat □ Urban heat island □ LEED □ Aesthetic (highly visible) □ Biodiversity Vegetation Intent: □ Organic-Meadow Aspect □ Landscape Design Aspect Permanent Irrigation: □ Yes □ No □ I don’t know Budget for the maintenance program: □ Low □ $ □ $$
Project Stage: □ Specification □ Tender □ Submittal Archi. & Landscape Archi.:
Owner: G.C.:
GaelleTexte tapé à la machine
GaelleTexte tapé à la machinePress Send at the end the second page when you are done.
GaelleTexte tapé à la machine
ROOF CARACTERISTICS: Number of roofs to vegetate and their surface areas: If there is more than one, fill out this study sheet for each one of them. Slope of the roof: □ < 5 % □ from 5 to 20 % □ more than 20 % Height of the roof from the ground: feet Exposure of the roof (for steep roof): □ East □ West □ North □ South Roof Situation:
Isolated roof Roof dominated Roof dominated …………………… by other walls………….. by distanced buildings For roofs with adjacent walls: - Is there a window adjacent to the roof? □ Yes □ No
- Is runoff from other buildings discharging onto the green roof? □ Yes □ No - Height of the wall adjacent to the roof? feet
Type of support: □ Concrete Deck □ Steel Deck □ Wood □ Other Max. weight load capacity: lbs/ft²
Waterproofing membrane type and installation date:
YOUR CONTACT INFORMATION: First Name*: Last Name*: Company*:
Title: □Landscape Architect & Architect □Owner □Roofer □Landscaper □Other
Address*:
City*: State*: Zip Code*:
Phone* : Fax: E-mail*:
Hydropack Complete Booklet emailGreen roof Quote Study SheetProduct*:□Hydropack Standard Plant Mix □Hydropack Accent Plants □Hydropack Custom PlantingProject address*: City*: Zip code*: Anticipated date of installation*: Total roof surface area to vegetate*: square feet What truck do you need*? □Dry Van ($) □ Flat Bed ($$) ...Type of building:□ Residential □ Commercial □ Governmental □ Educational □ Industrial □ Military □ Agricultural □ Religious □ Transit StationsDesign Intent (2 max.):□ Low Maintenance □ Storm water management □ Accessible Garden Roof □ Habitat □ Urban heat island □ LEED □ Aesthetic (highly visible) □ BiodiversityVegetation Intent: □ Organic-Meadow Aspect □ Landscape Design AspectPermanent Irrigation: □ Yes □ No □ I don’t knowBudget for the maintenance program: □ Low □ $ □ $$- Is runoff from other buildings discharging onto the green roof? □ Yes □ NoFirst Name*: Last Name*: Company*: Title: □Landscape Architect & Architect □Owner □Roofer □Landscaper □Other Address*: City*: State*: Zip Code*: Phone* : Fax: E-mail*:
Hydropack Standard Plant Mix: OffHydropack Accent Plants: OffHydropack Custom Planting: OffProject Address: Project name: Project City: Project Zip Code: Anticipated installation date: Surface area sq: ft:
Dry Van: OffFlat Bed: OffSide Curtains Truck: OffResidential: OffCommercial: OffGovernmental: OffEducational: OffIndustrial: OffMilitary: OffAgricultural: OffReligious: OffTransit Stations: OffLow Maintenance: OffStorm water management: OffAccessible Garden Roof: OffHabitat: OffUrban heat island: OffLEED: OffAesthetic highly visible: OffBiodiversity: OffOrganicMeadow Aspect: OffLandscape Design Aspect: OffBudget for the maintenance program: OffLow: Offundefined: Offundefined_2: OffSpecification: OffTender: OffSubmittal: OffArchi or L: A: name:
Owner name: GC name: 5: Offfrom 5 to 20: Offmore than 20: OffHeight of the roof in feet: East: OffWest: OffNorth: OffSouth: Offundefined_3: Roof dominated: Roof dominated_2: Is there a window adjacent to the roof: OffIs runoff from other buildings discharging onto the green roof: OffHeight of the wall adjacent to the roof: Concrete Deck: OffSteel Deck: OffWood: OffOther: Offmax: weight load lbs/sq: ft:
waterproofing membrane installation date: Bouton1: Contact first name: Contact email: Contact fax: Contact zip code: Contact city: Contact last name: Contact Address: contact company: Landscape Architect Architect: OffOwner: OffRoofer: OffLandscaper: OffOther_2: OffContact State: Contact phone:
