HYPERION LEDMounting instructions

54 6

1.31.2

HYPERION LEDMOUNTING INSTRUCTIONS

2 3

www.ledluks.com www.ledluks.com

1. Only competent persons are allowed to perform mounting and maintenance. 2. Before installation make sure that there is no

voltage in the network. 3. Use only original parts for repairs or maintenance. 4. Use only fixtures with proper IP protection in wet

rooms. 5. Before servicing, it is obligatory to disconnect the fixture from the network voltage. 6. Manufacturer does not guarantee

for damage caused by incorrect installation and/or use. 7. Any operation performed on the fixture that is not in accordance with

instructions will void manufacturer’s warranty.

EB DEB DALI

Safety notes

Inside the box

Electrical connection

Clean the plastic panels with damp microfiber cloth

CAREINDICATION:

1.1

1300 mm

32

HYPERION LEDMOUNTING INSTRUCTIONS

MountingMounting type 1

4x

43

4 5

www.ledluks.com www.ledluks.com

HYPERION LEDMOUNTING INSTRUCTIONS

HYPERION LEDMOUNTING INSTRUCTIONS

2.2 T1.2

2

2.1 T1.1

1

Mounting type 2 Type 1, lateral connection

Connection

CLICK CLICK

CLICK

CLICK

T1.2T1.1

Type 2, upper connection

6 7

www.ledluks.com www.ledluks.com

HYPERION LEDMOUNTING INSTRUCTIONS

HYPERION LEDMOUNTING INSTRUCTIONS

EOS LED CIRCULARMOUNTING INSTRUCTIONS

8

Ledluks d.o.o.Mednarodni Prehod 6, VrtojbaSI-5290 Šempeter pri GoriciSlovenia, EUROPE

Tel.: +386 5 393 24 75sales@ledluks.com

www.ledluks.com