Date post: | 10-Mar-2016 |
Category: |
Documents |
Upload: | kapilrajeev |
View: | 308 times |
Download: | 14 times |
of 12
Bending with UDL
Name: Kapil AgrawalStudent id: 2014pde5032
Select the Material for the Beam
Bending with UDL
Name: Kapil AgrawalStudent id: 2014pde5032
Select Hyper Beam to define crossection of the Beam
Bending with UDL
Name: Kapil AgrawalStudent id: 2014pde5032
Select Property for the Beam
Bending with UDL
Name: Kapil AgrawalStudent id: 2014pde5032
Define Component:
Create Nodes for defining Length of the beam:
Bending with UDL
Name: Kapil AgrawalStudent id: 2014pde5032
Create Bar by selecting all the nodes :
Bending with UDL
Name: Kapil AgrawalStudent id: 2014pde5032
Define Load Collector and Constraints:
Bending with UDL
Name: Kapil AgrawalStudent id: 2014pde5032
Define Load Collector and Force:
Bending with UDL
Name: Kapil AgrawalStudent id: 2014pde5032
Define Load Steps:
Save the Model :
Bending with UDL
Name: Kapil AgrawalStudent id: 2014pde5032
Go to Radioss and save as the model to .fem extension:
Click Radioss to Run the analysis:
Bending with UDL
Name: Kapil AgrawalStudent id: 2014pde5032
Open Two Window option to run Hyperview along with Hypermesh:
Load the file with extension .h3d:
Bending with UDL
Name: Kapil AgrawalStudent id: 2014pde5032
Select Displacement as result type: Maximum value of displacement is: 72mm
Select element stress as result type:
Maximum Stress at C is -657.5 Mpa
Bending with UDL
Name: Kapil AgrawalStudent id: 2014pde5032
Stress at D will be 0
Max Stress at point E will be 657.5MPa