I Year 02:00 PM TO 05:00 PM III Semester 09:30AM TO 12...

1

STATE BOARD OF TECHNICAL EDUCATION AND TRAINING: ANDHRA PRADESH::HYDERABAD

3 YEAR SANDWICH DIPLOMA COU RSES TIME TABLE FOR WRITTEN EXAMINATION C-09 Diploma in Architectural Assistantship- Oct-Nov-2015

Date Subject code Subject name

I Year 02:00 PM TO 05:00 PM29-Oct-2015 AA-101 English-I (Common A-101)31-Oct-2015 AA-102 Engineering Mathematics-I (Common A-102)03-Nov-2015 AA-103 Engineering Physics (Common A-103)05-Nov-2015 AA-104 Engineering Chemistry & Environmental Studies (Common A-104)08-Nov-2015 AA-107 Geometrical Drawing 13-Nov-2015 AA-106 Basic Design (9.30.AM to12.30PM & 2.00 PM to 5.00PM)14-Nov-2015 AA-105 Building Materials

III Semester 09:30AM TO 12:30PM29-Oct-2015 AA-301 English –II (Common A-301) 31-Oct-2015 AA-302 Engineering Mathematics-II (Common A-302) 03-Nov-2015 AA-305 Surveying 05-Nov-2015 AA-303 History of Architecture -I07-Nov-2015 AA-304 Engineering Mechanics 10-Nov-2015 AA-306 Architectural Design-I (9.30.AM to12.30PM & 2.00 PM to 5.00PM)12-Nov-2015 AA-306 Architectural Design-I (9.30.AM to12.30PM)14-Nov-2015 AA-308 Perspective Drawing

IV Semester 02:00 PM TO 05:00 PM28-Oct-2015 AA-401 English-III (Common A-401)

30-Oct-2015 AA-402 History of Architecture-II

02-Nov-2015 AA-403 Theory of Structures

04-Nov-2015 AA-407 Building construction Drawing

06-Nov-2015 AA-405 Architectural Design-II (9.30.AM to12.30PM & 2.00 PM to 5.00PM)

07-Nov-2015 AA-405 Architectural Design-II (2.00 PM to 5.00PM)

09-Nov-2015 AA-404 Specifications and Estimation

VI Semester 09:30AM TO 12:30PM28-Oct-2015 AA-601 English –IV (Common A -601)

30-Oct-2015 AA-602 Entrepreneurship and Project Management

02-Nov-2015 AA-603 Structural Design

04-Nov-2015 AA-604 Building Services

09-Nov-2015 AA-605A AA-605B

Urban Planning & LegislationConstruction failures, Repairs and Maintenance

NOTE: The Practical exams will be conducted on the dates notified by the principal as per the dates notified in the notification

Date:08-10-2015 Sd/-SECRETARY HYDERABAD SBTET AP.HYD

2


3 YEAR SANDWICH DIPLOMA COURSES TIME TABLE FOR WRITTEN EXAMINATION

C-09 Diploma in Automobile Engineering- Oct-Nov-2015


I Year 02:00PM TO 05:00PM 29-Oct-2015 A-101 English-I (Common AEI-101)31-Oct-2015 A-102 Engineering Mathematics-I (Common AEI-102)03-Nov-2015 A-103 Engineering Physics (Common AEI-103)05-Nov-2015 A-104 Engineering Chemistry & Environmental Studies (Common AEI-104)

07-Nov-2015 A-105 Work Shop Technology 10-Nov-2015 A-107 Engineering Drawing (Common AEI-107)

III Semester 09:30AM TO 12:30PM 29-Oct-2015 A-301 English –II (Common AEI-301)31-Oct-2015 A-302 Engineering Mathematics – II (Common AEI-302)03-Nov-2015 A-304 Automobile power plants05-Nov-2015 A-305 Automobile Transmission Systems07-Nov-2015 A-306 Engineering Materials and Manufacturing process10-Nov-2015 A-307 Machine Drawing14-Nov-2015 A-303 Thermal Engineering

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 A-401 English-III (Common AEI-401) 30-Oct-2015 A-402 Basic Mechanical Engineering02-Nov-2015 A-403 Strength of Materials and Fluid Mechanics04-Nov-2015 A-404 Automobile Chassis & Body Engineering06-Nov-2015 A-405 Automobile Electrical Systems09-Nov-2015 A-406 Automobile Servicing & Maintenance

VI Semester 09:30AM TO 12:30PM 28-Oct-2015 A-601 English –IV (Common AEI -601) 30-Oct-2015 A-602 Industrial Management and Entrepreneurship (Common AEI -602) 02-Nov-2015 A-603 Design of Machine Elements04-Nov-2015 A-604 Motor Transport Organisation06-Nov-2015 A-605 Production Technology

09-Nov-2015A-606AA-606BA-606C

Special Purpose VehiclesAlternate Fuels and Emission ControlAutomobile Air Conditioning

13-Nov-2015 A-607 Automobile Engineering Drawing


Date: 08-10-2015 Sd/-SECRETARY HYDERABAD SBTET AP.HYD

3



C-09 Diploma in Applied Electronics and Instrumentation Engineering- Oct-Nov-2015

Date Subject code Subject name I Year 02:00 PM TO 05:00 PM

29-Oct-2015 AEI-101 English-I (Common A-101)31-Oct-2015 AEI-102 Engineering Mathematics-I (Common A-102)03-Nov-2015 AEI-103 Engineering Physics (Common A-103)05-Nov-2015 AEI-104 Engineering Chemistry & Environmental Studies (Common A-104)07-Nov-2015 AEI-105 Electronic Components & Devices 10-Nov-2015 AEI-107 Engineering Drawing (Common A-107)

III Semester 09:30AM TO 12:30PM 29-Oct-2015 AEI-301 English – II (Common A-301)31-Oct-2015 AEI-302 Engineering Mathematics –II (Common A-302) 03-Nov-2015 AEI -303 Electronic Circuits05-Nov-2015 AEI -304 Basic Electrical Engineering.07-Nov-2015 AEI -305 Digital Electronics10-Nov-2015 AEI -306 Process Instrumentation

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 AEI-401 English-III (Common A-401) 30-Oct-2015 AEI-402 Electronic Measuring instruments02-Nov-2015 AEI -403 Microcontrollers and Its Applications04-Nov-2015 AEI -404 Industrial Electronics & Control Engineering.06-Nov-2015 AEI -405 Analytical Instrumentation09-Nov-2015 AEI -406 Process Control

VI Semester 09:30AM TO 12:30PM 28-Oct-2015 AEI-601 English –IV (Common A -601) 30-Oct-2015 AEI-602 Industrial Management and Entrepreneurship (Common–EE/EC-602)02-Nov-2015 AEI-603 Bio medical Instrumentation04-Nov-2015 AEI-604 Industrial Automation06-Nov-2015 AEI-605 Principles of communications & Linear IC applications

09-Nov-2015AEI-606(A) AEI-606(B)

Power Electronics Power plant Instrumentation



4



C-09 Diploma in Civil Engineering - Oct-Nov-2015


I Year 02:00 PM TO 05:00 PM29-Oct-2015 C-101 English-I (Common A-101)31-Oct-2015 C-102 Engineering Mathematics – I (Common A-102)03-Nov-2015 C-103 Engineering Physics (Common A-103) 05-Nov-2015 C-104 Engineering Chemistry & Environmental Studies (Common A-104) 07-Nov-2015 C-105 Surveying – I 10-Nov-2015 C-107 Engineering Drawing (Common A-107)

14-Nov-2015 C-106 Engineering Mechanics

III Semester 09:30AM TO 12:30PM 29-Oct-2015 C-301 English –II (Common A-301)31-Oct-2015 C-302 Engineering Mathematics-II (Common A-302)03-Nov-2015 C-303 Strength of Materials & Theory of Structures05-Nov-2015 C-304 Hydraulics07-Nov-2015 C-305 Surveying - II10-Nov-2015 C-306 Construction Materials14-Nov-2015 C-307 Civil Engineering Drawing – I

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 C-401 English – III ( Common A-401)30-Oct-2015 C-402 R.C Structures02-Nov-2015 C-403 Irrigation Engineering04-Nov-2015 C-404 Quantity Surveying06-Nov-2015 C-405 Environmental Engineering I09-Nov-2015 C-406 Construction Practice13-Nov-2015 C-407 Civil Engineering Drawing II

VI Semester 09:30AM TO 12:30PM 28-Oct-2015 C-601 English – IV (Common A- 601) 30-Oct-2015 C-602 Steel Structures02-Nov-2015 C-603 Construction & Quality Management04-Nov-2015 C-604 Transportation Engineering06-Nov-2015 C-605 Environmental Engineering – II

09-Nov-2015C-606(A) C-606(B) C-606(C)

Low Cost Housing, Rural Water Supply and Sanitation Geo Technical Engineering Maintenance of Buildings

13-Nov-2015 C-607 Structural Engineering DrawingNOTE: The Practical exams will be conducted on the dates notified by the principal as per the dates notified in the notification


5



C-09 Diploma in Computer Engineering - Oct-Nov-2015


29-Oct-2015 CM-101 English-I (Common A-101)31-Oct-2015 CM-102 Engineering Mathematics-I (Common A-102)03-Nov-2015 CM-103 Engineering Physics (Common A-103)05-Nov-2015 CM-104 Engineering Chemistry & Environmental Studies (Common A-104)07-Nov-2015 CM-105 Computer Fundamentals & Programming in ‘C’ (Common IT-105)10-Nov-2015 CM-107 Engineering Drawing (Common A-107)

III Semester 09:30AM TO 12:30PM 29-Oct-2015 CM-301 English –II (Common A-301)31-Oct-2015 CM-302 Engineering Mathematics –II (CommonA-302)03-Nov-2015 CM-303 Basic Electrical & Electronics Engg. 05-Nov-2015 CM-304 Digital Electronics & Computer Architecture (Common IT-304)07-Nov-2015 CM-305 Data Structures through C (Common IT-305)10-Nov-2015 CM-306 RDBMS (Common IT-306)

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 CM-401 English-III ( Common A-401)30-Oct-2015 CM-402 Operating systems (Common IT-402)02-Nov-2015 CM-403 Computer Hardware & Networking (Common IT-403) 04-Nov-2015 CM-404 OOPS through C++ (Common IT-404)06-Nov-2015 CM-405 Microprocessors09-Nov-2015 CM-406 Web designing (Common IT-406)

VI Semester 9:30 AM TO 12:30 PM 28-Oct-2015 CM-601 English – IV (Common A-601) 30-Oct-2015 CM-602 Industrial Management and Entrepreneurship (Common A-602) 02-Nov-2015 CM-603 System Administration04-Nov-2015 CM-604 Java Programming (Common IT-604)06-Nov-2015 CM-605 Net Programming (Common IT-605)

09-Nov-2015CM-606(A) CM-606(B) CM-606(C)

Software Engineering (Common IT-603) Mobile Computing Advanced Database Systems



6



C-09 Diploma in Electronics and Communication Engineering - Oct-Nov-2015


I Year 02:00 PM TO 05:00 PM29-Oct-2015 EC-101 English-I ( Common A-101) 31-Oct-2015 EC-102 Engineering Mathematics-I ( Common A-102)03-Nov-2015 EC-103 Engineering Physics ( Common A-103)

05-Nov-2015 EC-104Engineering Chemistry & Environmental Studies (Common A-104)

07-Nov-2015 EC-105 Basic Electronics 10-Nov-2015 EC-107 Engineering Drawing ( Common A-107)

III Semester 09:30AM TO 12:30PM 29-Oct-2015 EC-301 English – II ( Common A-30131-Oct-2015 EC-302 Engineering Mathematics –II ( Common A-302)03-Nov-2015 EC-303 Electronic Circuits -I05-Nov-2015 EC-304 Communication Engineering07-Nov-2015 EC-305 Digital Electronics10-Nov-2015 EC-306 Circuit Theory

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 EC-401 English – III ( Common A-401)30-Oct-2015 EC-402 Electronic Circuits- II02-Nov-2015 EC-403 Communication Systems 04-Nov-2015 EC-404 Microprocessors06-Nov-2015 EC-405 Electronic Measuring Instruments09-Nov-2015 EC-406 Audio & Video Systems

VI Semester 09:30AM TO 12:30PM 28-Oct-2015 EC-601 English - IV (Common A -601)

30-Oct-2015EC-602

Industrial Management and Entrepreneurship (Common AEI/EE -602)

02-Nov-2015 EC-603 Micro Controllers04-Nov-2015 EC-604 Advanced Communication Systems06-Nov-2015 EC-605 Industrial Electronics

09-Nov-2015EC-606(A) EC-606(B)

Data Communication & Computer Networks Computer Hardware



7


3 YEAR SANDWICH DIPLOMA COURSES TIME TABLE FOR WRITTEN EXAMINATIONC-09 Diploma in Commercial and Computer Practice- Oct-Nov-2015


I Year 02:00 PM TO 05:00 PM

29-Oct-2015CCP-107 P-ICCP-108 P-II

English Typewriting-P-I 2.00. PM TO 2.10. PMEnglish Typewriting-P-II 2.30. PM TO 3.15. PM

31-Oct-2015 CCP-103 English Shorthand 03-Nov-2015 CCP-101 English –I 05-Nov-2015 CCP-102 Accountancy - I 07-Nov-2015 CCP-104 Business Organization 09-Nov-2015 CCP-105 Computer Fundamentals of Information Technology

DCCP III Semester 09:30AM TO 12:30PM

29-Oct-2015

CCP-308-A P-I English Typewriting-Paper-I (45 wpm)10mts 9.00 AM TO 9.10 AM CCP-309-A P-II English Typewriting-Paper-II 1 hr 9.30 AM TO 10.30 AMCCP-308-B P-I Telugu Typewriting-Paper-I (25 wpm) 10mts 11.00 AM TO 11.10 AMCCP-309-B P-II Telugu Typewriting-Paper-II 45 mts 11.30 AM TO 12.15. PM

31-Oct-2015 CCP-301 English – II 03-Nov-2015 CCP-303 Office Organization and Correspondence 05-Nov-2015 CCP-304 Computer Packages 07-Nov-2015 CCP-302 Accountancy-II

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 CCP-401 English - III30-Oct-2015 CCP-402 Accountancy-III02-Nov-2015 CCP-403 Quantitative Techniques-I04-Nov-2015 CCP-404 Visual Basic

VI Semester 09:30AM TO 12:30PM

28-Oct-2015CCP-601

CCP-601AEnglish – IV (Old)English – IV (New)

30-Oct-2015 CCP-602 Business Economics02-Nov-2015 CCP-603 Quantitative Techniques-II04-Nov-2015 CCP-604 Principles of Marketing

06-Nov-2015CCP-605(A) CCP-605(B) CCP-605(C)

Human Resources Management Banking Insurance



8


3½ YEAR SANDWICH DIPLOMA COURSES TIME TABLE FOR WRITTEN EXAMINATIONC-09 Diploma in Chemical Engineering- Oct-Nov-2015


I Year 02:00 PM TO 05:00 PM29-Oct-2015 CH-101 English-I (Common A-101)31-Oct-2015 CH-102 Engineering Mathematics – I (Common A-102)03-Nov-2015 CH-103 Engineering Physics (Common-A-103)05-Nov-2015 CH-104 Inorganic Chemistry 07-Nov-2015 CH-105 General Mechanical Engineering . 10-Nov-2015 CH-107 Engineering Drawing (Common A-107)14-Nov-2015 CH-106 Material Technology

III Semester 09:30AM TO 12:30PM 29-Oct-2015 CH-301 English- II (Common A-301)31-Oct-2015 CH-302 Engineering Mathematics II (Common A-302) 03-Nov-2015 CH-303 Basic Electrical Engineering05-Nov-2015 CH-304 Fluid Mechanics (Common PET-304)07-Nov-2015 CH-305 Organic & Physical Chemistry10-Nov-2015 CH-306 Chemical Process Calculations (CommonCHOT-PC-PP-PET-306)14-Nov-2015 CH-307 Chemical Process Drawing

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 CH-401 English – III (Common A-401) 30-Oct-2015 CH-402 Mechanical Unit Operations (Common CHOT-PC-PP-402) 02-Nov-2015 CH-403 Inorganic Chemical Technology04-Nov-2015 CH-405 Heat Transfer (Common PET-405)06-Nov-2015 CH-404 Organic Chemical Technology 09-Nov-2015 CH-406 Mass Transfer (Common PET-404)

VII Semester 09:30AM TO 12:30PM28-Oct-2015 CH-701 English-IV30-Oct-2015 CH-702 Industrial Management & Entrepreneurship02-Nov-2015 CH-703 Thermodynamics and Reaction Engineering04-Nov-2015 CH-704 Instrumentation and Process control06-Nov-2015 CH-705 Environmental Studies and Pollution control Engineering

09-Nov-2015CH-706A Energy TechnologyCH-706B Chemical Plant Operation & Safety

13-Nov-2015 CH-707 Chemical Plant Design Drawing NOTE: The Practical exams will be conducted on the dates notified by the principal as per the dates notified in the notification


9


3- YEAR SANDWICH DIPLOMA COURSES TIME TABLE FOR WRITTEN EXAMINATION

C-09 Diploma in Chemical Engineering (Sugar Technology) - Oct-Nov-2015


I Year 02:00 PM TO 05:00 PM29-Oct-2015 CHST-101 English-I (Common A-101)31-Oct-2015 CHST-102 Engineering Mathematics-1 (Common A-102)03-Nov-2015 CHST-103 Engineering Physics (Common A-103)05-Nov-2015 CHST-104 Engineering Chemistry & Environmental Studies (Common A-104)07-Nov-2015 CHST-105 Sugar Production Technology10-Nov-2015 CHST-107 Engineering Drawing (Common A-107)

III Semester 09:30AM TO 12:30PM 29-Oct-2015 CHST-301 English – II (Common A-301)31-Oct-2015 CHST-302 Engineering Mathematics –II (Common A-302) 03-Nov-2015 CHST-304 Electrical engineering & basic electronics (Common M-304) 05-Nov-2015 CHST-306 Heat Transfer07-Nov-2015 CHST-303 Chemistry-II (Common CHOT-PC-PP-305) 10-Nov-2015 CHST-305 Fluid Mechanics

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 CHST-401 English – III (Common A-401) 30-Oct-2015 CHST-402 Mechanical Unit Operations02-Nov-2015 CHST-403 Process Technology04-Nov-2015 CHST-404 Sugar Cane Agriculture06-Nov-2015 CHST-405 Sugar Technology Chemical Control09-Nov-2015 CHST-406 General Mechanical Engineering (Common EE-406)

VI Semester 09:30AM TO 12:30PM28-Oct-2015 CHST-601 English - IV (Common A-601) 30-Oct-2015 CHST-602 Industrial Management and Entrepreneurship (Common A-602) 02-Nov-2015 CHST-603 Mass Transfer Operations04-Nov-2015 CHST-604 Sugar Equipment Design and Calculations06-Nov-2015 CHST-605 By Products And Pollution Control

09-Nov-2015CHST-606ACHST-606BCHST-606C

Thermodynamics and Reaction EngineeringChemical Process CalculationsSugar Chemistry

13-Nov-2015 CHST-607 Sugar Equipment Drawing and plant lay OutNOTE: The Practical exams will be conducted on the dates notified by the principal as per the dates notified in the notification


10


3½ YEAR SANDWICH DIPLOMA COURSES TIME TABLE FOR WRITTEN EXAMINATION C-09 Diploma in Chemical Engineering ( Oil Technology) - Oct-Nov-2015


29-Oct-2015 CHOT-101 English-I (Common A101)31-Oct-2015 CHOT-102 Engineering Mathematics - I (Common A-102)03-Nov-2015 CHOT-103 Engineering Physics (Common A-103) 05-Nov-2015 CHOT-104 Engineering Chemistry & Environmental Studies (Common A-104)07-Nov-2015 CHOT-105 Engineering Materials 10-Nov-2015 CHOT-107 Engineering Drawing (Common A-107)

III Semester 09:30AM TO 12:30PM 29-Oct-2015 CHOT-301 English- II (Common A-301) 31-Oct-2015 CHOT-302 Engineering Mathematics – II (Common A-302)

03-Nov-2015CHOT-303 Basics of Mechanical and Electrical Engg.

(Common CHPC-CHPP-PET-30305-Nov-2015 CHOT-304 Unit Operations-I (Common CHPP-CHPC-304) 07-Nov-2015 CHOT-305 Chemistry – II (Common CHPP-CHPC-305/CHST-303) 10-Nov-2015 CHOT-306 Chemical Process Calculations (Common CH-306) 14-Nov-2015 CHOT-307 Process Equipment Drawing (Common CHPP-CHPC-307)

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 CHOT-401 English – III (Common A-401) 30-Oct-2015 CHOT-402 Mechanical Unit Operations (Common CH-PC-PP-402) 02-Nov-2015 CHOT-403 General Chemical Technology (Common CHPP-PC-403) 04-Nov-2015 CHOT-404 Unit Operations-II (Common CHPP-PC-404) 06-Nov-2015 CHOT-405 Technology of Vegetable oils and fats-I09-Nov-2015 CHOT-406 Technology of Vegetable oils and fats-II

VII Semester 09:30AM TO 12:30PM28-Oct-2015 CHOT-702 Industrial Management & Entrepreneurship30-Oct-2015 CHOT-703 Thermodynamics and Reaction Engineering02-Nov-2015 CHOT-704 Instrumentation and Process control

04-Nov-2015CHOT-705A CHOT-705B

Industrial Pollution Control EngineeringFuels Furnaces and Refractories

06-Nov-2015 CHOT-706 Technology of Vegetable Oils and Fats-III 09-Nov-2015 CHOT-701 English-IV



11


3½ YEAR SANDWICH DIPLOMA COURSES TIME TABLE FOR WRITTEN EXAMINATION

C-09 Diploma in Chemical Engineering (Petro chemicals) Oct-Nov-2015


I Year 02:00 PM TO 05:00 PM29-Oct-2015 CHPC-101 English-I (Common A-101)31-Oct-2015 CHPC-102 Engineering Mathematics - I (Common A-102)03-Nov-2015 CHPC-103 Engineering Physics (Common A-103) 05-Nov-2015 CHPC-104 Engineering Chemistry & Environmental Studies (Common A-104)07-Nov-2015 CHPC-105 Materials Technology 10-Nov-2015 CHPC-107 Engineering Drawing (Common A-107)

III Semester 09:30AM TO 12:30PM 29-Oct-2015 CHPC-301 English- II (Common A-301)31-Oct-2015 CHPC-302 Engineering Mathematics – II (Common A-302)

03-Nov-2015CHPC-303 Basics of Mechanical and Electrical Engg

(Common CHOT-CHPP-PET-303)05-Nov-2015 CHPC-304 Unit Operations-I (Common CHOT-CHPP-304) 07-Nov-2015 CHPC-305 Chemistry – II (Common CHOT-CHPP-305/CHST-303)10-Nov-2015 CHPC-306 Chemical Process Calculations (Common CH-306)14-Nov-2015 CHPC-307 Process Equipment Drawing (Common CHOT-CHPP-307)

IV-Semester 02:00PM TO 05:00PM 28-Oct-2015 CHPC-401 English – III (Common A-401) 30-Oct-2015 CHPC-402 Mechanical Unit Operations (Common CH-OT-PP-402) 02-Nov-2015 CHPC-403 General Chemical Technology (Common CHOT-PP-403) 04-Nov-2015 CHPC-404 Unit Operations-II (Common CHOT-PP-404) 06-Nov-2015 CHPC-405 Petroleum Refining (Common PET-406)09-Nov-2015 CHPC-406 Petrochemical Technology - I

VII Semester 09:30AM TO 12:30PM28-Oct-2015 CHPC-703 Thermodynamics and Reaction Engineering30-Oct-2015 CHPC-704 Instrumentation and Process control

02-Nov-2015CHPC-705 A CHPC-705 B


04-Nov-2015 CHPC-706 Petrochemical Technology - II06-Nov-2015 CHPC-701 English-IV09-Nov-2015 CHPC-702 Industrial Management & Entrepreneurship



12


3½ YEAR SANDWICH DIPLOMA COURSES TIME TABLE FOR WRITTEN EXAMINATION

C-09 Diploma in Chemical Engineering (Plastics & Polymers)- Oct-Nov-2015


29-Oct-2015 CHPP-101 English-I (Common A-101) 31-Oct-2015 CHPP-102 Engineering Mathematics – I (Common A-102)03-Nov-2015 CHPP-103 Engineering Physics (Common A-103) 05-Nov-2015 CHPP-104 Engineering Chemistry & Environmental Studies (Common A-104)07-Nov-2015 CHPP-105 Polymer Engineering Materials

10-Nov-2015 CHPP-107 Engineering Drawing (Common A-107)

III Semester 09:30AM TO 12:30PM 29-Oct-2015 CHPP-301 English – II (Common A-301)31-Oct-2015 CHPP-302 Engineering Mathematics – II (Common A-302)

03-Nov-2015CHPP-303 Basics of Mechanical and Electrical Engg

(Common CHOT-CHPC-PET-303)05-Nov-2015 CHPP-304 Unit Operations – I (Common CHOT-CHPC-304) 07-Nov-2015 CHPP-305 Chemistry – II (Common CHOT-CHPC-305/ST-303) 10-Nov-2015 CHPP-306 Chemical Process Calculations (Common CH -306)14-Nov-2015 CHPP-307 Process equipment drawing (Common CHOT-CHPC-307)

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 CHPP-401 English - III (Common A-401) 30-Oct-2015 CHPP-402 Mechanical Unit Operations (Common CH-OT-PC-402) 02-Nov-2015 CHPP-403 General Chemical Technology (Common CHPP-OT-403) 04-Nov-2015 CHPP-404 Unit Operations-II (Common CHPP-OT-404) 06-Nov-2015 CHPP-405 Polymer products and polymer processing09-Nov-2015 CHPP-406 Polymer Additives and Plastic Testing

VII Semester 09:30AM TO 12:30PM28-Oct-2015 CHPP-704 Instrumentation and Process control

30-Oct-2015CHPP-705ACHPP-705B


02-Nov-2015 CHPP-706 Plastic Technology04-Nov-2015 CHPP-701 English-IV06-Nov-2015 CHPP-702 Industrial Management & Entrepreneurship09-Nov-2015 CHPP-703 Thermodynamics and Reaction Engineering



13



C-09 Diploma in Garment Technology - Oct-Nov-2015

I Year 02:00 PM TO 05:00 PM29-Oct-2015 GT-101 English-I (Common A-101)31-Oct-2015 GT-102 Applied Textile Chemistry03-Nov-2015 GT-103 Textile Science05-Nov-2015 GT-104 Principles of Garment Construction07-Nov-2015 GT-105 Introduction to Apparel Industry & Care of Clothing

III Semester 09:30AM TO 12:30PM 29-Oct-2015 GT-301 English-II (Common-A-301)31-Oct-2015 GT-302 Principles of fashion03-Nov-2015 GT-304 Study of Apparel Industry 05-Nov-2015 GT-305 Principles of product development07-Nov-2015 GT-303 Technology of Textile Dyeing and Printing

IV Semester 02:00 PM TO 05:00 PM28-Oct-2015 GT-401 English – III (Common A-401) 30-Oct-2015 GT-402 Fashion Designing02-Nov-2015 GT-403 Management, Entrepreneurship And Environmental studies04-Nov-2015 GT-404 Study of Apparel Industry

VI Semester 09:30AM TO 12:30PM 28-Oct-2015 GT -601 English - IV (Common A-601)30-Oct-2015 GT-602 Fashion Designing02-Nov-2015 GT-603 Technology of Textile Dyeing and Printing 04-Nov-2015 GT-604 Study of Apparel Industry

06-Nov-2015GT-605AGT-605BGT-605C

Traditional Indian Textiles and Costumes Advanced textile printingForeign trade practice and procedure



14



C-09 Diploma in Electrical & Electronics Engineering - Oct-Nov-2015


29-Oct-2015 EE-101 English-I (Common A-101)31-Oct-2015 EE-102 Engineering Mathematics-I (Common A-102)03-Nov-2015 EE-103 Engineering Physics (Common A-103)05-Nov-2015 EE-104 Engineering Chemistry & Environmental Studies (Common A-104) 07-Nov-2015 EE-105 Basic Electrical Engineering10-Nov-2015 EE-107 Engineering Drawing (Common A-107)

III Semester 09:30AM TO 12:30PM 29-Oct-2015 EE-301 English - II (Common A-301) 31-Oct-2015 EE-302 Engineering Mathematics –II (Common A-302)03-Nov-2015 EE-303 Electrical Circuits05-Nov-2015 EE-304 D.C. Machines & Batteries07-Nov-2015 EE-305 Electrical & Electronic Measuring Instruments10-Nov-2015 EE-306 Electronics Engg

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 EE-401 English –III (Common A-401)30-Oct-2015 EE-402 A.C. Machines - I 02-Nov-2015 EE-403 Power Systems - I 04-Nov-2015 EE-404 Electrical Installation & Estimation06-Nov-2015 EE-405 Digital Electronics and Micro Controllers09-Nov-2015 EE-406 General Mechanical Engg (Common CHST-406) 13-Nov-2015 EE-408 Electrical Engineering Drawing

VI Semester 9:30 AM TO 12:30 PM28-Oct-2015 EE-601 English – IV (Common A-601)

30-Oct-2015EE-602

Industrial Management and Entrepreneurship (Common With AEI/EC-602)

02-Nov-2015 EE-603 A.C. Machines-II04-Nov-2015 EE-604 Power Electronics

06-Nov-2015EE-605(A) EE-605(B) EE-605(C)

Electrical Utilization and Automation Electric Traction & PLC Electric Traction and Renewable Energy Sources.

09-Nov-2015 EE-606 Power System-IINOTE: The Practical exams will be conducted on the dates notified by the principal as per the dates notified in the notification


15



C-09 Diploma in Mechanical Engineering - Oct-Nov-2015

Date Subject code Subject nameI Year 02:00 PM TO 05:00 PM

29-Oct-2015 M-101 English-I (Common A-101)31-Oct-2015 M-102 Engineering Mathematics-I (Common A-102 ) 03-Nov-2015 M-103 Engineering Physics (Common A-103 ) 05-Nov-2015 M-104 Engineering Chemistry & Environmental Studies (Common A-104) 07-Nov-2015 M-105 Workshop Technology (Common RAC-105)10-Nov-2015 M-107 Engineering Drawing (Common A-107 )

III Semester 09:30AM TO 12:30PM 29-Oct-2015 M-301 English –II (Common A-301 ) 31-Oct-2015 M-302 Engineering Mathematics –II (Common A-302 ) 03-Nov-2015 M-304 Electrical Engg & Basic Electronics (Common CHST-304)05-Nov-2015 M-303 Engineering Mechanics07-Nov-2015 M-305 Thermal Engineering-I10-Nov-2015 M-306 Manufacturing Technology -I14-Nov-2015 M-307 Machine Drawing (Common MET-307)

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 M-401 English-III (Common A-401 ) 30-Oct-2015 M-402 Manufacturing Technology-II02-Nov-2015 M-407 Production Drawing04-Nov-2015 M-403 Strength of Materials06-Nov-2015 M-404 Engineering Materials09-Nov-2015 M-406 Hydraulics & Fluid Power systems13-Nov-2015 M-405 Thermal Engineering-II

VI Semester 9:30 AM TO 12:30 PM28-Oct-2015 M-601 English –IV (Common A-601) 30-Oct-2015 M-602 Industrial Management and Entrepreneurship (Common A -602) 02-Nov-2015 M-603 Industrial Engineering & Estimating and costing04-Nov-2015 M-604 CAD/CAM06-Nov-2015 M-605 Design of Machine Elements

09-Nov-2015M-606(A) M-606(B) M-606(C)

Refrigeration & Air Conditioning Automobile Engineering Energy sources & Power plant Engineering



16



C-09 Diploma in Hotel Management and Catering Technology- Oct-Nov-2015


I Year 02:00 PM TO 05:00 PM29-Oct-2015 HMCT-101 Food Production-I 31-Oct-2015 HMCT-102 Food & Beverage Service-I 03-Nov-2015 HMCT-103 Front Office Operations 05-Nov-2015 HMCT-104 Accommodation Operation 07-Nov-2015 HMCT-105 Nutrition & Hygiene and Sanitation09-Nov-2015 HMCT-106 Communication

III Semester 09:30AM TO 12:30PM 29-Oct-2015 HMCT-301 Food Production – II (Bakery & Confectionary)31-Oct-2015 HMCT-302 Food & Beverage Management03-Nov-2015 HMCT-304 Hotel Engineering05-Nov-2015 HMCT-305 Hotel Accounts 07-Nov-2015 HMCT-303 Front Office Management

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 HMCT-401 Food Production III (Cookery)30-Oct-2015 HMCT-402 Food & Beverage Service - II02-Nov-2015 HMCT-403 Human Resource Management04-Nov-2015 HMCT-404 Financial Management06-Nov-2015 HMCT-405 Computer Applications

VI Semester 09:30AM TO 12:30PM 28-Oct-2015 HMCT-601 Food Production - IV 30-Oct-2015 HMCT-602 Food & Beverage Service III02-Nov-2015 HMCT-603 Tourism & Travel Management04-Nov-2015 HMCT-604 Sales & Marketing 06-Nov-2015 HMCT-605 Hotel Law



17

STATE BOARD OF TECHNICAL EDUCATION AND TRAINING:

ANDHRA PRADESH::HYDERABAD 3 YEAR SANDWICH DIPLOMA COURSES TIME TABLE FOR WRITTEN EXAMINATION

C-09 Diploma in Information Technology - Oct-Nov-2015


I Year 02:00 PM TO 05:00 PM29-Oct-2015 IT-101 English-I (Common A-101)31-Oct-2015 IT-102 Engineering Mathematics – I (Common A-102)03-Nov-2015 IT-103 Engineering Physics (Common A-103)05-Nov-2015 IT-104 Engineering Chemistry & Environmental Studies (Common A-104)07-Nov-2015 IT-105 Computer Fundamentals and Programming “C” (Common CM-105) 10-Nov-2015 IT-107 Engineering Drawing (Common A-107)

III Semester 09:30AM TO 12:30PM 29-Oct-2015 IT-301 English – II (Common A-301) 31-Oct-2015 IT-302 Engineering Mathematics –II (Common A-302) 03-Nov-2015 IT-303 Multimedia Basics 05-Nov-2015 IT-304 Digital Electronics & Computer Architecture (Common CM-304)07-Nov-2015 IT-305 Data Structures through C (Common CM-305)10-Nov-2015 IT-306 RDBMS (Common CM-306)

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 IT-401 English-III (Common A-401) 30-Oct-2015 IT-402 Operating systems (Common CM-402)02-Nov-2015 IT-403 Computer Hardware & Networking (Common CM-403)04-Nov-2015 IT-404 OOPS through C++ (Common CM-404) 06-Nov-2015 IT-405 System Administration 09-Nov-2015 IT-406 Web Designing (Common CM-406)

VI Semester 9:30 AM TO 12:30 PM28-Oct-2015 IT-601 English – IV (Common A-601) 30-Oct-2015 IT-602 Industrial Management and Entrepreneurship (Common A-602) 04-Nov-2015 IT-604 Java Programming (Common CM-604)06-Nov-2015 IT-605 .Net Programming (Common CM-605) 09-Nov-2015 IT-603 Software Engineering (Common CM-606A)

13-Nov-2015IT-606(A) IT-606(B) IT-606( C)

Computer graphics E-Commerce Internetworking with TCP/IP

NOTE: The Practical exams will be conducted on the dates notified by the principal as per

the dates notified in the notification


18


3 ½ YEAR SANDWICH DIPLOMA COURSES TIME TABLE FOR WRITTEN EXAMINATION

C-09 Diploma in Metallurgical Engineering - Oct-Nov-2015


29-Oct-2015 MET-101 English-I (Common A-101)31-Oct-2015 MET-102 Engineering Mathematics - I (Common A-102)03-Nov-2015 MET-103 Engineering Physics (Common A-103)05-Nov-2015 MET-104 Engineering Chemistry & Environmental Studies (Common A-104)07-Nov-2015 MET-105 Elementary Principles of Metallurgy10-Nov-2015 MET-107 Engineering Drawing (Common A-107)

III Semester 09:30AM TO 12:30PM 29-Oct-2015 MET -301 English-II (Common A-301) 31-Oct-2015 MET -302 Engineering Mathematics-II (Common A-302) 03-Nov-2015 MET -303 Fuels, Refractories & Pyrometry05-Nov-2015 MET -304 Metallurgical Thermodynamics07-Nov-2015 MET -305 Physical Metallurgy10-Nov-2015 MET -306 Iron Making14-Nov-2015 MET -307 Machine Drawing (Common M-307)

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 MET -401 English-III (Common A-401) 30-Oct-2015 MET -402 Electrical Technology02-Nov-2015 MET -403 Heat Treatment Technology04-Nov-2015 MET -404 Steel Making06-Nov-2015 MET -405 Material Testing09-Nov-2015 MET -406 Foundry Technology

VII Semester 09:30AM TO 12:30PM28-Oct-2015 MET -702 Industrial Management & Entrepreneurship 30-Oct-2015 MET -701 English-IV (Common TT-701)02-Nov-2015 MET -703 Mechanical Metallurgy04-Nov-2015 MET -704 Non-ferrous Extractive metallurgy06-Nov-2015 MET -705 Metal Casting Technology

09-Nov-2015MET -706 A Welding TechnologyMET -706 B Corrosion Engineering



19


3 YEAR SANDWICH DIPLOMA COURSES TIME TABLE FOR WRITTEN EXAMINATIONC-09 Diploma in Mining Engineering - Oct-Nov-2015


I Year 02:00 PM TO 05:00 PM29-Oct-2015 MNG-101 English-I (Common A-101)31-Oct-2015 MNG-102 Engineering Mathematics-I (Common A-102)03-Nov-2015 MNG-103 Engineering Physics (Common A-103)05-Nov-2015 MNG-104 Engineering Chemistry & Environmental Studies (Common A-104)07-Nov-2015 MNG-105 Elements of Mining10-Nov-2015 MNG-107 Engineering Drawing (Common A-107)14-Nov-2015 MNG-106 Mining Geology-I

III-Semester 09:30AM TO 12:30PM 29-Oct-2015 MNG-301 English –II (Common A-301) 31-Oct-2015 MNG-302 Engineering Mathematics – II (Common A-302) 03-Nov-2015 MNG-303 Basic Electrical Engineering05-Nov-2015 MNG-304 Coal Mining07-Nov-2015 MNG-305 Mining Geology – II10-Nov-2015 MNG-306 Mine Surveying – I

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 MNG-401 English-III (Common A-401) 30-Oct-2015 MNG-402 Basic Mechanical Engineering02-Nov-2015 MNG-403 Metal Mining04-Nov-2015 MNG-404 Mining Machinery-I06-Nov-2015 MNG-405 Mine Environmental Engg09-Nov-2015 MNG-406 Mine Surveying-II13-Nov-2015 MNG-407 Rock Mechanics and Strata Control

VI Semester 09:30AM TO 12:30PM28-Oct-2015 MNG -601 English – IV (Common A-601) 30-Oct-2015 MNG-602 Mine Management and Entrepreneurship02-Nov-2015 MNG-603 Opencast Mining04-Nov-2015 MNG-604 Mining Machinery - II

06-Nov-2015 MNG-605 Mining Legislation and General Safety

09-Nov-2015MNG-606AMNG-606B

Advanced Mine Environmental EngineeringAdvanced Surveying



20

STATE BOARD OF TECHNICAL EDUCATION AND TRAINING:ANDHRA PRADESH::HYDERABAD

3 ½ YEAR SANDWICH DIPLOMA COURSES TIME TABLE FOR WRITTEN EXAMINATION C-09 Diploma in Textile Technology - Oct-Nov-2015


I Year 02:00 PM TO 05:00 PM29-Oct-2015 TT-101 English-I (Common A-101)31-Oct-2015 TT-102 Engineering Mathematics- I (Common A-102)03-Nov-2015 TT-103 Engineering Physics (Common A-103)05-Nov-2015 TT-104 Engineering Chemistry & Environmental Studies (Common A-104)07-Nov-2015 TT-105 Basic Mechanical Engineering10-Nov-2015 TT-107 Engineering Drawing (Common A-107)14-Nov-2015 TT-106 Textile Raw Materials

III Semester 09:30AM TO 12:30PM 29-Oct-2015 TT-301 English –II (Common A-301)

31-Oct-2015 TT-302 Engineering Mathematics-II (Common A-302)

03-Nov-2015 TT-304 Weaving Preparatory

05-Nov-2015 TT-305 Weaving Technology -I

07-Nov-2015 TT-306 Textile Chemical Processing-I

10-Nov-2015 TT-307 Knitting & Non Oven Technology

14-Nov-2015 TT-303 Spinning Technology –I

IV Semester 02:00PM TO 05:00PM

28-Oct-2015 TT-401 English-III (Common A-401)

30-Oct-2015 TT-402 Textile Calculations02-Nov-2015 TT-403 Spinning technology II04-Nov-2015 TT-404 Textile testing06-Nov-2015 TT-405 Weaving technology II09-Nov-2015 TT-406 Textile Chemical Processing-II13-Nov-2015 TT-407 Statistics & Quality Control

VII Semester 09:30AM TO 12:30PM28-Oct-2015 TT-702 Textile Mill Management & Entrepreneurship 30-Oct-2015 TT-701 English-IV (Common MET -701)02-Nov-2015 TT-703 Instrumentation of Textile Machines04-Nov-2015 TT-704 Non Conventional Spinning06-Nov-2015 TT-705 Advanced Fabric Manufacture

09-Nov-2015TT-706 A TT-706 B TT-706 C

Technical TextilesMulti Fiber SpinningGarment Technology

13-Nov-2015 TT-707 Textile Machine Drawing NOTE: The Practical exams will be conducted on the dates notified by the principal as per the dates notified in the notification


21



C-09 Diploma in Petroleum Technology Oct-Nov-2015


29-Oct-2015 PET -101 English-I (Common A -101)31-Oct-2015 PET -102 Engineering Mathematics - I (Common A -102)03-Nov-2015 PET -103 Engineering Physics (Common A -103) 05-Nov-2015 PET-104 Engineering Chemistry & Environmental Studies (Common A-104)07-Nov-2015 PET -105 Petroleum Geology 10-Nov-2015 PET -107 Engineering Drawing (Common A-107)

III Semester 09:30AM TO 12:30PM 29-Oct-2015 PET-301 English –II (Common A -301)

31-Oct-2015 PET-302 Engineering Mathematics-II (Common A -302) 03-Nov-2015 PET-303 Basics of Mechanical And Electrical Engg (Common CHOT-PC-PP-303)

05-Nov-2015 PET-304 Fluid Mechanics (Common CH-304)07-Nov-2015 PET-305 Petroleum Geo Chemistry10-Nov-2015 PET-306 Chemical Process Calculations (Common CH-306) 14-Nov-2015 PET-307 Process equipment drawing

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 PET-401 English-III (Common A-401)30-Oct-2015 PET-402 Fundamentals of Petroleum Exploration & Drilling Engineering 02-Nov-2015 PET-403 Petroleum Production Engineering 04-Nov-2015 PET-405 Heat Transfer (Common CH-405)06-Nov-2015 PET-406 Petroleum Refining (Common CHPC-405)09-Nov-2015 PET-404 Mass Transfer (Common CH-406)

VI Semester 09:30AM TO 12:30PM28-Oct-2015 PET-601 English-IV30-Oct-2015 PET-602 Industrial Management and Entrepreneurship02-Nov-2015 PET-603 Petroleum Reservoir Engineering 04-Nov-2015 PET-604 Surface Production Operations06-Nov-2015 PET-605 HSE & FF in Petroleum Industry

09-Nov-2015PET-606A PET-606B PET-606C

Offshore EngineeringCoal Bed Methane EngineeringEnhanced Oil Recovery Techniques



22



C-09 Diploma in Refrigeration and Air-Conditioning - Oct-Nov-2015


I Year 02:00 PM TO 05:00 PM29-Oct-2015 RAC -101 English-I (Common A -101) 31-Oct-2015 RAC -102 Engineering Mathematics-I (Common A -102) 03-Nov-2015 RAC -103 Engineering Physics (Common A-103)

05-Nov-2015 RAC -104Engineering Chemistry & Environmental Studies (Common A-104)

07-Nov-2015 RAC -105 Workshop Technology (Common M-105) 10-Nov-2015 RAC-107 Engineering Drawing (Common A-107)

III Semester 09:30AM TO 12:30PM 29-Oct-2015 RAC - 301 English –II (Common A -301 ) 31-Oct-2015 RAC -302 Engineering Mathematics –II (Common A -302 ) 03-Nov-2015 RAC - 303 Refrigeration - I05-Nov-2015 RAC - 304 Basic Electrical & Electronics Engineering07-Nov-2015 RAC - 305 Thermal Engineering-I 10-Nov-2015 RAC - 306 Manufacturing Technology -I14-Nov-2015 RAC - 307 Machine Drawing

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 RAC-401 English-III (Common A-401 ) 30-Oct-2015 RAC -402 Strength of Materials02-Nov-2015 RAC -403 Air conditioning-I04-Nov-2015 RAC -404 Fluid Mechanics06-Nov-2015 RAC -405 Refrigeration - II09-Nov-2015 RAC -406 Heat Transfer



23


3 ½ YEAR SANDWICH DIPLOMA COURSES TIME TABLE FOR WRITTEN EXAMINATION C-09 Diploma in Bio-Medical – Oct-Nov-2015

I Year 02:00 PM TO 05:00 PM

29-Oct-2015 BM -101 English-I (Common A-101)31-Oct-2015 BM -102 Engineering Mathematics - I (Common A-102)03-Nov-2015 BM -103 Engineering Physics (Common A-103)05-Nov-2015 BM -104 Engineering Chemistry & Environmental Studies(Common A-104)07-Nov-2015 BM -105 Basic Electrical Engineering. 10-Nov-2015 BM -107 Engineering Drawing (Common A-107)14-Nov-2015 BM -106 Electronics Components and Devices

III Semester 09:30AM TO 12:30PM

29-Oct-2015 BM-301 English – II (Common A-301) 31-Oct-2015 BM-302 Engineering Mathematics- II (SEPARATE Q.P WITH OTHER COURSES)

03-Nov-2015 BM-304 Circuit Theory05-Nov-2015 BM-305 Digital Electronics07-Nov-2015 BM-306 Unix & C

10-Nov-2015 BM-303 Electronic Circuits – I

IV Semester 02:00PM TO 05:00PM 28-Oct-2015 BM -401 English-III (Common A-401) 16-Nov-2015 BM -402 Electronic Circuits - II17-Nov-2015 BM -403 Communication and data transmission 18-Nov-2015 BM -404 Microprocessors and Interfacing19-Nov-2015 BM -405 Physiological Systems Engineering20-Nov-2015 BM -406 Bio Medical Instrumentation

V-Semester 02:00PM TO 05:00PM30-Oct-2015 BM-501 Computer Networks02-Nov-2015 BM-502 Test Equipment & Power Electronics 04-Nov-2015 BM-503 Bio Medical Signal Processing06-Nov-2015 BM-504 Analytical Instrumentation Engineering09-Nov-2015 BM-505 Bio Medical Equipment - I

VI Semester 09:30AM TO 12:30PM28-Oct-2015 BM-601 English – IV (Common A-601) 30-Oct-2015 BM-602 Hospital Management & Entrepreneurship02-Nov-2015 BM-603 Microcontroller &Embedded system04-Nov-2015 BM-604 Medical Informatics &Telemedicine 06-Nov-2015 BM-605 Bio-Medical Equipment-II

09-Nov-2015BM-606 ABM-606 BBM-606 C

Medical Implants EngineeringBiological control systemComputer in Medicine and Internet concepts

NOTE: The Practical exams will be conducted on the dates notified by the principal as per the dates notified in the notification Date:08-10-2015 HYDERABAD Sd/-SECRETARY

SBTET AP.HYD

Date post:	19-Jul-2018
Category:	Documents
Upload:	vobao
View:	212 times
Download:	0 times

I Year 02:00 PM TO 05:00 PM III Semester 09:30AM TO 12...

Documents