I074 Ladies Pajama - Rabbit

7/28/2019 I074 Ladies Pajama - Rabbit

1/12

I074 ladies pajama t-shirt + shorts Rabbits

1. MATERIALbase materialmaterial composition: 100% cottonyarn thickness : 20tex = 30sweight: min 165g/m2 - max 175g/sq.m. (165gsq.m. with tolerance +10g/sq.m.)tests condition: Standard atmospheres for conditioning and testing ISO 139 (measured at 20C+2Cand air humidityType and structure of fabrics: S/Jt-shirt S/Jpants - S/Jtexture: 17-18 columns / 1 cm, 21-22 linesshrinkage EN ISO 6330 shrinkage on length and width max. 5%twisting of fabrics: before and after laundering tolerated moving by 0-3columns on 10cm of length

elastic waistbandelastic waistband specification: Plain elasticwidth: 35 mm,Elasticity: min 145%composition : Polyester, latex (rubber yarn)

2. DESIGNT-shirt2 colors version

base material color:

Base material Carton marking

1) MME Bordeaux P 18-1945 TCX(24)

Bordeaux MMELGR

2) LGB Gray-white P 13-3802TCX (32) Gray-white LGBDME


2/12

solitaire print color :

Base material color 1 color 2 Color 3 Color 4 Color 5 Color 6 Color 7

1 Bordeaux P18-1945 TCX

P 18-1945TCX

(24)

P 18-2109TCX

(30)

P 13-4105TCX

(35)

P 18-0201TCX

(5)

P 15-1905TCX

(30)

P 15-4101TCX

(5)

P 18-1945TCX

(24)2 Gray-white P13-3802TCX

P 19-2030TCX(26)

P 15-1905TCX(30)

P 13-3802TCX(32)

P 18-0000TCX(5)

P 17-1512TCX(30)

P 17-0000TCX(6)

P 19-2030TCX(26)


3/12

threads colors: same as base material colorcolorfastness of based fabrics and used threads : EN ISO 105-C06 colorfastness in commercialand domestic launderingtolerance min level (degree) 4

colors of neckline hem and hem on sleeve:Version Hem color1/ P 18-1945 TCX (24) Version 1 ( same as print on pants 2

2/ P 13-3802TCX (32) Version 2 ( same as print on pants 2

Solitaire print sizes :


4/12

durability after launderingkeep colors , colors and fine hand filling softness and smoothness of material

Pants..2 color versionbase material color : ( color 3)1) Pantone 13-4105 TCX (35)2) LGB gray-white Pantone 13-3802TCX (32)

print colors :

Base material color 1 color 2 Color 4 Color 5

Version 1P 13-4105TCX

(35)

Pantone 18-1945TCX (24)




VersionP 13-3802TCX (32)






5/12

threads colors: same as base material colorcolorfastness of based fabrics and used threads : EN ISO 105-C06 colorfastness in commercialand domestic launderingtolerance min level (degree) 4print repeat pattern size

durability after launderingkeep colors , colors and fine hand filling softness and smoothness of material

3. APPEARANCE AND TECHNOLOGY


6/12

T-SHIRTLadeis t-shirt with round neckline.

neckline finishing and finishing of bottom end of sleeves: bordered strip fold for a half / cutaskew / ( bordered hem width on garment 11mm) sewn on3-threads machine bottom and up part cover stitches, 1mm from hem endneedle spacing 6mm,5cutting in / 1cm

used threads :elastic PES threads as covering + inelastic PES needle threadsseams appearance :seam shall be even, neat, shall not be awry and shall not make released loopsmaterial, threads shall not stick out the seams .Elasticity of seams :

Elasticity shall be sufficient for stretchiness of pure cotton fabrics, threads shall not break at maximalstretching of knitted fabrics

shoulder seams :sewn by 4-threads overlock(stitch width 5 mm, 6-7 cutting in / 1 cm)Into shoulder seams shall be inserted silicon tapes / for to firm/ width 4mmused threads : elastic PES threads as covering + inelastic PES needle threadsseams appearance :seam shall be even, neat, shall not be awry and shall not make released loopsthreads and threads chains shall not stick out the seam .After parts sewing together and turning of parts on face part the seams shall be straight and flat .Elasticity of seams :Elasticity shall be sufficient for stretchiness of pure cotton fabrics, threads shall not break at maximalstretching of knitted fabricsshoulder seam fold at neckline end fix by straight bar tacking


7/12

side seams ,armhole and sleeves seams:sewn by 4-threads overlock(stitch width 5 mm, 6-7cutting in/ 1 cm)used threads : elastic PES threads as covering + not elastic PES needle threadsseams appearingseam shall be even, neat, shall not be awry and shall not make released loopsthreads and threads chains shall not stick out the seam .After parts sewing together and turning of parts on face part the seams shall be straight and flat .Sleeves shall not twist .Elasticity of seams :Elasticity shall be sufficient for stretchiness of pure cotton fabrics, threads shall not break at maximalstretching of knitted fabricssleeve seam fold at bottom end of sleeve fix by straight bar tacking

sleeves seam fold of bottom end of sleeve firm by bar tacking

tolerance limit for twisting of side seam ( measured in bottom end)before washing: moving of seam from the closest garment edge within 0,5cm

after washing: moving of seam from the closest garment edge within2cm

Bottom end of garment finishing : by folding and sewing of the fold end on 3-threads machine,bottom and up cover part stitches(needle spacing 6mm, 5cutting in/ 1cmfold width 2cmbottom end seams finish on side seam

used threads at seamselastic PES threads as covering + inelastic PES needle threadsseams appearanceseam shall be even, neat, shall not going out of sewing ax and shall not make released loops in reversematerial edges and threads shall not stick out the seams.seams shall not plastically deform

Elasticity of seams :Elasticity shall be sufficient for stretchiness of pure cotton fabrics, threads shall not break at maximalstretching of knitted fabrics

PANTS


8/12

shorts without side seam

seat and inside seams of shortsare sewn by 4-threads double needle overlock (stitch width 5 mm, 5 -6cutting in/ 1 cm)used threads at seams..Elastic PES threadsseams appearanceseam shall be even, neat, shall not going out of sewing ax and shall not make released loopsmaterial and threads shall not stick out the seams.After seams turning to the reverse, the seams shall be flat and shall not be deformedElasticity of seams :Elasticity shall be sufficient for stretchiness of pure cotton fabrics, threads shall not break at maximalstretching of knitted fabricsElasticity of seams :Min 90%used threads at seams Elastic PES threadsseams appearanceseam shall be even, neat, shall not make released loopsmaterial edges , threads chains and threads shall not stick out the seams.

tolerance limit for inside seams of leg opening twisting before and after washing ( measured in bottomend)before washing: moving of seam from the closest garment edge within 0,5cmafter washing: moving of seam from the closest garment edge within 2cm

Adjusting of part with print checks:- after joining of seat seams shall print checks flows without any steps ( tolerance 2mm)- vertical strip of print check shall be parallel with side seam ( before and after washing)print position on garment tolerance- before washing : moving of vertical strips from the closest garment edge within 0,5cm- after moving : moving of vertical strips from the closest garment edge within 2cm

waist end : hidden elastic band at waist (width 3,5cm) sufficiently elastic and soft.Elastic waistband is to waist end sewn by 4-threads double needle overlock(stitch width 5 mm, 5 -6cutting in/1 cm)waist fold ( width 3,5cm)is turned together with el. band to reverse and sewn 4x by 2-threads machineby chains stitches. Fourth sewing is in distance of 3,2 cm from waist end.the distance of 2 upper and 2 bottom sewing is 0,7 cm .Seam finish at back part.

pants frilled so as size A on final garment respond to specification table.

Elasticity of waist with hidden el. band:Min 90%threads shall not break while stretch.used threads at seamsElastic PES threads in the whole seamseams appearance

seam shall be even, neat, shall not be awrySeams shall meet required elasticity Threads shall not break while stretchingMaterial edges, threads and hidden el. band shall not stick out the seams

waist cord


9/12

2 cm from center seams of waist end of front part between 2 sewing are made 2 holes ( length 1,2cm)The cord is going by waist tube. Cord ends are finished by double fold and sewing by 2-thread lock stitch. Threads ends shall be completely cut (removed).

cord (width 0,7cm) made of same material as pants: - cut skew strip folded for a half with bendedfold, sewn through by double needle machine bottom cover stitches ( stitch width 4mm, 5 stitches/1cm)

used threads at seamselastic PES threads as covering + inelastic PES needle threadsseams appearanceseam shall be even, neat, shall not be awry and shall not make from reverse released loopsMaterial edges and threads shall not stick out the seamsseams shall not be plastically deformedElasticity of seams :Elasticity shall be sufficient for stretchiness of pure cotton fabrics, threads shall not break at maximalstretching

Bottom ends of legs opening finishing : folding and sewing of fold ends on 3-needle machine with

bottom and up cover stitchesneedle spacing 6mm, 5cutting in / 1cm)seam fold width 2cmseam finish on gusset seamused threads at seamselastic PES threads as covering + inelastic PES needle threadsseams appearanceseam shall be even, neat, shall not be awry and shall not make from reverse released loopsMaterial edges and threads shall not stick out the seamsseams shall not plastically deformElasticity of seams :Elasticity shall be sufficient for stretchiness of pure cotton fabrics, threads shall not break at maximal

stretching


10/12

4. MEASUREMENTST_SHIRT specification table

S M L XL

A bottom circumference of final garment 50 52 54 56

AA waist circumference on garment 48 50 52 54

B Total garment length from neckline64 66 68 70,5

BB Total garment length from shoulder point 62 64 66 68

C Side length 40,5 41 41,5 42

D Distance from neckline front to bottom end 50,5 52 53 54,5

DD Distance from neckline back to bottomend

62,5 64,3 66,2 68,2

E Armhole length 24 25,5 27 28,4

F Neckline width 16,5 17 17,2 17,4

G Shoulder width 11 11,7 12,4 13,2

I Sleeve length 19 20 21 22

K bottom circumference of sleeve end 17 18 19 20

table of fix dimension

PANTS specification table

S M L XL

A waist circumference on final garment 36 39 42 45

AA waist on cut pattern 50 53 56 59

B Side length 30 31 32 33

C leg opening circumference 29,5 31,5 33,5 35,5E Center front part height 24 25 26 27

F Center back part height 31 32 33,5 34,5

G leg opening 31,5 33,5 35,5 37,5

Waist cord length 110 115 120 125

Bottom fold width 2 cmSleeve fold width 11 mm

Neckline hem width on garment 11 mm


11/12

table of fix dimension

Waist fold width 3,5cm

Hidden elastic band width 3,5 cm

Waist hem width ( with hidden el. band) 3,5 cm

Folds width at legs opening 2 cm

5. MARKINGmarking can be changed still mentioned is only for informationlabel with material composition and symbolswhite satin tape with printed : size, material composition, wash and care symbols and art. no

print is made by black print color on white label, acc. to req. size and art.no.logo Gino - for men

Gina - for womenlabel position : t-shirt sewn in side seam reverse , 10cm from bottom end

pants sewn in et center back waist end reverse

material mentioned on label shall respond to production material ( see point 1)


12/12

woven label with logo Gino- tape with jacquard pattern

position: sewn in left side seam of t-shirt 6cm up the bottom end - letter Gina visible atfront

- colors acc. to picture

EAN 13 bar code :Each garment should be equipped by EAN 13 bar code1/ once shall be EAN 13bar code printed on paper Gina Brand hangtag ( size min 12x28)2/secondly shall be EAN 13bar code printed on self sticking labelself sticking label with EAN 13 bar code ( min. size 12x28 mm). shall be stick on the outside at back

side of box or single polybag.EAN 13bar code will be different for each color and size

Date post:	03-Apr-2018
Category:	Documents
Upload:	sakib212
View:	225 times
Download:	0 times

I074 Ladies Pajama - Rabbit

Documents