Integrated Architecture Recommended Literature
Where to Start
This document provides lists of technical publications for Integrated Architecture products. These lists are not all-inclusive, but they do include the most-commonly accessed publications for the related products.
With the PDF version of this document open:
1. Select a product family from the bookmarks on the left.
2. Drill down to the specific product.
3. Select a publication by clicking the link.
This displays the PDF version of the publication as stored in Literature Library.
Logix5000 Controller Resources
All Logix5000 Controllers
Resource Description
Logix5000 Controllers Quick StartPublication number 1756-QS001
Basic Procedures for New UsersThis manual provides a starter set of procedures to:
• establish communication with a Logix5000 controller.• program a Logix5000 controller.• perform online maintenance tasks such a search and edit logic, run histograms,
clear faults, and force I/O values.
Logix5000 Controllers Design GuidelinesPublication number 1756-RM094
Design Considerations for Experienced UsersThis reference manual provides guidelines you can follow to optimize your system. This manual also provides system information you need to make system design choices.
Integrated Architecture: Foundations of Modular ProgrammingPublication number IA-RM001
Modular Design Practices for All Users
This document contains modular programming guidelines that follow industry standards and provide best practices for standardized programming structures, conventions, configurations, and strategies in implementing industrial automation solutions with Rockwell Automation products.
Logix5000 Controllers Common Procedures Programming ManualPublication number 1756-PM001
Common Controller Procedures for All UsersThis manual guides the development of projects for Logix5000 controllers. It provides links to individual guides for information on:
• Add-On Instructions, 1756-PM010• ASCII Strings, 1756-PM001• Controller Information and Status, 1756-PM015• Import/Export Project Components, 1756-PM019• I/O and Tag Data, 1756-PM004• Major and Minor Faults, 1756-PM014• Messages, 1756-PM012• Nonvolatile Memory, 1756-PM017• Produced and Consumed Tags, 1756-PM011• Programming: Function Block Diagram, 1756-PM009• Programming: Relay Ladder, 1756-PM008• Programming: Sequential Function Chart, 1756-PM006• Programming: Structured Text, 1756-PM007• Security, 1756-PM016• Tasks, Programs, and Routines, 1756-PM005• IEC 61131-3 Compliance, 1756-PM018
ControlFLASH Firmware Upgrade Kit Quick StartPublication number 1756-QS105
Use ControlFLASH to Upgrade FirmwareThis manual describes how to use ControlFLASH software to upgrade controller firmware.
CompactFlash File System on Logix5000 Controllers Application SolutionPublication number LOGIX-AP007
Use the CompactFlash File SystemThis manual describes how to use CompactFlash file system.
Associated Catalog Numbers• 1756 ControlLogix• 1768 CompactLogix• 1769 CompactLogix
3 Publication IASIMP-RM001B-EN-E - September 2008
4 Logix5000 Controller Resources
PhaseManager User ManualPublication number LOGIX-UM001
Design and Program Equipment Phases for Logix5000 ControllersThis manual shows you how to set up and program a Logix5000 controller to use equipment phases. It gives you guidance and examples to:
• lay-out your code in sections that include equipment phases.• set up a state model for your equipment.• program your equipment to run by the state model.• use equipment phase instructions to transition to a different state, handle faults,
and set up break points.
Motion Modules in Logix5000 Control Systems User ManualPublication number LOGIX-UM002
Configure and Use Motion Modules with Logix5000 ControllersUse this manual to setup and program motion control using a Logix5000 motion module.
Associated Catalog Numbers• 1756 ControlLogix
− 1756-M03SE, 1756-M08SE, and 1756-M16SE SERCOS interface modules− 1756-M02AE servo module
• 1768 CompactLogix− 1768-M04SE SERCOS interface module
• 1789 SoftLogix− 1784-PM16SE SERCOS interface module
Logix5000 Controllers System Reference ManualPublication number 1756-QR107
Summarized Controller Information for Experienced UsersThis manual provides abbreviated information and procedures regarding programming languages, instructions, communications, and status.
This manual is meant for experienced Logix-system programmers. The information in this manual is presented with the assumption that the reader understands how to operate the controller.
RSLogix Emulate 5000 Getting Results GuidePublication number LGEM5K-GR015
Install and Use RSLogix Emulate 5000 SoftwareThis getting results guide provides you with information on how to install and navigate the RSLogix Emulate 5000 software.
Associated Catalog Numbers• 9310-WED200ENE
Logix5000 Import/Export Reference ManualPublication number 1756-RM084
Import/Export Controller LogicThis manual provides the details for importing and exporting controller logic to and from text-editable files, such as for use with Notepad.
Converting PLC-5 or SLC 500 Logic to Logix-Based Logic Reference ManualPublication number 1756-RM085
Convert PLC-5 and SLC 500 LogicThis manual provides the details for converting PLC-5 and SLC 500 logic into a controller project for use with a Logix5000 controller.
Resource Description
Publication IASIMP-RM001B-EN-E - September 2008
Logix5000 Controller Resources 5
All Logix5000 Programming Languages
Resource Description
Logix5000 Controllers General Instructions Reference ManualPublication number 1756-RM003
General InstructionsThis document provides a programmer with details about each available instruction for a Logix5000 controller. You should already be familiar with how the Logix5000 controller stores and processes data.
Logix5000 Controllers Motion Instructions Reference ManualPublication number 1756-RM007
Motion InstructionsThis document provides a programmer with details about the motion instructions that are available for a Logix5000 controller. You should already be familiar with how the Logix5000 controller stores and processes data.
Logix5000 Controllers Process Control and Drives Instructions Reference ManualPublication number 1756-RM006
Process Control and Drives InstructionsThis document provides a programmer with details about each function block instruction available for a Logix5000 controller. You should already be familiar with how the Logix5000 controller stores and processes data.
Logix5000 Controllers Instruction Execution Times and Memory UsePublication number 1756-RM087
Instruction Execution Time and Memory UseUse these worksheets to estimate the memory use and execution time of your logic. Use this information to select among different programming options.
The information in these worksheets is based on RSLogix 5000 software revision 13 and controller firmware revision 13. One exception is the equipment phase instructions. Their information is based on revision 15. Actual results may vary because of the configuration of your project and the revision of software and firmware that you are using.
Publication IASIMP-RM001B-EN-E - September 2008
6 Logix5000 Controller Resources
1769 CompactLogix Controllers
Resource Description
CompactLogix Selection GuidePublication number 1769-SG001
Plan a CompactLogix SystemThis guide provides selection criteria to determine which CompactLogix controller fits your application. This guide also provides product specifications and descriptions to help design a CompactLogix system and select the appropriate components.
Associated Catalog Numbers• 1769-L23-QBFC1B, 1769-L23E-QB1B, 1769-L23E-QBFC1B• 1769-L31, 1769-L32CR, 1769-L32E, 1769-L35C, 1769-L32E
1769-L23x CompactLogix Packages Controllers Quick Start and User ManualPublication number IASIMP-QS010
Basic Procedures for New UsersThis quick start provides examples of using a 1769-L23x CompactLogix controller to connect to multiple devices (local and distributed I/O, drives, PanelView Plus) over various networks (EtherNet/IP, DeviceNet, Serial).
Associated Products
• 1769-L23x CompactLogix controllers• POINT I/O modules• PowerFlex 40 drives• PanelView Plus terminals
1769-L3x CompactLogix System Quick StartPublication number IASIMP-QS001
Basic Procedures for New UsersThis quick start provides examples of using a 1769-L3x CompactLogix controller to connect to multiple devices (local and distributed I/O, drives, PanelView Plus) over various networks (EtherNet/IP, ControlNet, DeviceNet, Serial).
Associated Products
• 1769-L3x CompactLogix controllers• POINT I/O modules• PowerFlex 70 drives• PowerFlex 40 drives• PanelView Plus terminals
1769 CompactLogix System User ManualPublication number 1769-UM011
Configure, Program, and Operate a 1769 CompactLogix ControllerUse this manual to become familiar with the 1769 CompactLogix controller and its features.
This manual describes the necessary tasks to install, configure, program, and operate a 1769 CompactLogix system. In some cases, this manual includes references to additional documentation that provides the more comprehensive details.
Associated Catalog Numbers• 1769-L31, 1769-L32CR, 1769-L32E, 1769-L35C, 1769-L32E
1769-L23x Popular Configuration DrawingsPublication number IASIMP-QR011
with descriptive text
Publication number IASIMP-QR012with no text
Plan 1769-L23x CompactLogix SystemsUse these drawings to plan system requirements for typical CompactLogix configurations.
Associated Catalog Numbers• 1769-L23-QBFC1B, 1769-L23E-QB1B, 1769-L23E-QBFC1B
Publication IASIMP-RM001B-EN-E - September 2008
Logix5000 Controller Resources 7
• For common controller documentation, see All Logix5000 Controllers.• For common programming documentation, see All Logix5000 Programming Languages.
1769-L3x Popular Configuration DrawingsPublication number IASIMP-QR001
with descriptive text
Publication number IASIMP-QR002with no text
Plan 1769-L3x CompactLogix SystemsUse these drawings to plan system requirements for typical CompactLogix configurations.
Associated Catalog Numbers• 1769-L31, 1769-L32CR, 1769-L32E, 1769-L35C, 1769-L32E
CompactLogix Performance and Capability Quick ReferencePublication number IASIMP-QR007
Design CompactLogix SystemsThis reference provides system performance and capacity information, along with design considerations, to help improve performance.
Associated Catalog Numbers• 1769-L31, 1769-L32CR, 1769-L32E, 1769-L35C, 1769-L32E
Resource Description
Publication IASIMP-RM001B-EN-E - September 2008
8 Logix5000 Controller Resources
1768 CompactLogix Controllers
• For common controller documentation, see All Logix5000 Controllers.• For common programming documentation, see All Logix5000 Programming Languages.
Resource Description
CompactLogix Selection GuidePublication number 1769-SG001
Plan a CompactLogix SystemThis guide provides selection criteria to determine which CompactLogix controller fits your application. This guide also provides product specifications and descriptions to help design a CompactLogix system and select the appropriate components.
Associated Catalog Numbers• 1768-L43, 1768-L45
1768 CompactLogix System Quick StartPublication number IASIMP-QS003
Basic Procedures for New UsersThis quick start provides examples of using a CompactLogix controller to connect to multiple devices (local and distributed I/O, drives, PanelView Plus) over various networks (EtherNet/IP, DeviceNet, Serial).
Associated Products
• 1768 CompactLogix controllers• POINT I/O modules• PowerFlex 70 drives• PanelView Plus terminals• Kinetix 6000 drives
1768 CompactLogix System User ManualPublication number 1768-UM001
Configure, Program, and Operate a 1769 CompactLogix ControllerUse this manual to become familiar with the 1768 CompactLogix controller and its features.
This manual describes the necessary tasks to install, configure, program, and operate a 1768 CompactLogix system. In some cases, this manual includes references to additional documentation that provides the more comprehensive details.
Associated Catalog Numbers• 1768-L43, 1768-L45
Popular Configuration DrawingsPublication number IASIMP-QR008
with descriptive text
Publication number IASIMP-QR009with no text
Plan CompactLogix SystemsUse these drawings to plan system requirements for typical CompactLogix configurations.
Associated Catalog Numbers• 1768-L43
Publication IASIMP-RM001B-EN-E - September 2008
Logix5000 Controller Resources 9
1756 ControlLogix Controllers
• For common controller documentation, see All Logix5000 Controllers.• For common programming documentation, see All Logix5000 Programming Languages.
Resource Description
ControlLogix Selection GuidePublication number 1756-SG001
Plan a ControlLogix SystemThis guide provides selection criteria to determine which ControlLogix controller fits your application. This guide also provides product specifications and descriptions to help design a ControlLogix system and select the appropriate components.
Associated Catalog Numbers• 1756-L55M12, 1756-L55M13, 1756-L55M14, 1756-L55M16, 1756-L55M22,
1756-L55M23, 1756-L55M24• 1756-L61, 1756-L62, 1756-L63
ControlLogix System User ManualPublication number 1756-UM001
Configure, Program, and Operate a ControlLogix ControllerUse this manual to become familiar with the ControlLogix controller and its features.
This manual describes the necessary tasks to install, configure, program, and operate a ControlLogix system. In some cases, this manual includes references to additional documentation that provides the more comprehensive detail.
Associated Catalog Numbers• 1756-L55M12, 1756-L55M13, 1756-L55M14, 1756-L55M16, 1756-L55M22,
1756-L55M23, 1756-L55M24• 1756-L61, 1756-L62, 1756-L63• 1756-L60M03SE
ControlLogix Redundancy System User ManualPublication number 1756-UM523
Configure, Program, and Operate a Redundant ControlLogix SystemThis manual guides the design, development, and implementation of a redundancy system for a ControlLogix controller.
Associated Catalog Numbers• 1756-CNB/D/E, 1756-CNBR/D/E• 1756-ENBT, 1756-EWEB• 1756-L55, 1756-L55M12, 1756-L55M13, 1756-L55M14, 1756-L55M16,
1756-L55M22, 1756-L55M23, 1756-L55M24, 1756-L61, 1756-L62, 1756-L63• 1757-SRM
Publication IASIMP-RM001B-EN-E - September 2008
10 Logix5000 Controller Resources
ControlLogix I/O Modules
Resource Description
ControlLogix Digital I/O User ManualPublication Number 1756-UM058
Configure, Program, and Operate 1756 Digital I/OThis manual describes how to install, configure, and troubleshoot ControlLogix digital I/O modules.
ControlLogix digital I/O modules are input/output modules that provide ON/OFF detection and actuation. Using the producer/consumer network model, they can produce information when needed while providing additional system functions.
Associated Catalog NumbersInput Modules
• 1756-IA16, -IA16I, -IA32, -IA8D, -IB16, -IB16D, -IB16I, -IB32/B, -IC16, -IG16, -IH16I, -IM16I, -IN16, -IV16, -IV32
Output Modules
• 1756-OA16, -OA16I, -OA8, -OA8D, -OA8E, -OB16D, -OB16E, -OB16I, -OB16IS, -OB32, -OB8, -OB8EI, -OC8, -OG16, -OH8I, -ON8, -OV16E, -OV32E, -OW16I, -OX8I
ControlLogix Analog I/O User ManualPublication Number 1756-UM009
Configure, Program, and Operate 1756 Analog I/OThis manual describes how to install, configure, and troubleshoot ControlLogix analog I/O module.
ControlLogix analog I/O modules are interface modules that convert analog signals to digital values for inputs and convert digital values to analog signals for outputs. Controllers can then use these signals for control purposes.
Associated Catalog Numbers• 1756-IF16,- IF6CIS, -IF6I, -IF8, -IR6I, -IT6I, -IT6I2, -OF4, -OF6CI, -OF6VI, -OF8
ControlLogix High-speed Analog I/O User ManualPublication Number 1756-UM005
Configure, Program, and Operate 1756 High-speed Analog I/OThis manual describes how to install, configure, and troubleshoot the ControlLogix high-speed analog I/O module.
The ControlLogix high speed analog I/O module is an interface module that converts analog signals to digital values for inputs and converts digital values to analog signals for outputs. Using the producer/consumer network model, the module produces information when needed while providing additional system functions.
Associated Catalog Number• 1756-IF4FXOF2F
ControlLogix High-speed Counter Module User ManualPublication Number 1756-UM007
Configure, Program, and Operate 1756 High-speed Counter ModuleThis manual describes how to install, configure, and troubleshoot the ControlLogix high-speed counter module.
Associated Catalog Number• 1756-HSC
ControlLogix Configurable Flowmeter Module User ManualPublication Number 1756-UM010
Configure, Program, and Operate 1756 Configurable Flowmeter ModuleThis manual describes how to install, configure, and troubleshoot the ControlLogix configurable flowmeter module.
Associated Catalog Number• 1756-CFM
Publication IASIMP-RM001B-EN-E - September 2008
Logix5000 Controller Resources 11
ControlLogix Communication Modules
Resource Description
ControlLogix SynchLink Module User ManualPublication Number 1756-UM521
Configure and Operate 1756 SynchLink ModuleThis manual describes how to configure and operate the ControlLogix SynchLink module.
A ControlLogix SynchLink module, through the use of fiber optic communication technology, lets you implement time synchronization, distributed motion control, and coordinated drive control.
Associated Catalog Number• 1756-SYNCH
ControlLogix DH+ / Remote I/O Module User ManualPublication Number 1756-UM514
Configure and Operate 1756 DH+ / Remote I/O ModuleThis manual describes how to configure and operate the ControlLogix DH+ / Remote I/O module.
Associated Catalog Number• 1756-DHRIO
ControlLogix DH-485 Module User ManualPublication Number 1756-UM532
Configure and Operate 1756 DH-485 ModuleThis manual describes how to configure and operate the ControlLogix DH-485 module.
Associated Catalog Number• 1756-DH485
Publication IASIMP-RM001B-EN-E - September 2008
12 Logix5000 Controller Resources
1756 GuardLogix Controllers
• For common controller documentation, see All Logix5000 Controllers.• For common programming documentation, see All Logix5000 Programming Languages.
Resource Description
Safety Accelerator Toolkit for GuardLogix Systems Quick StartPublication number IASIMP-QS005
Basic Procedures for Developing Safety ApplicationsThis quick start is designed to provide a framework for developing safety applications. Each section guides you through the tasks you need to perform to design, program, and monitor your safety application.
Associated Products
• GuardLogix controllers
GuardLogix Controllers User ManualPublication Number 1756-UM020
Configure, Program, and Operate a GuardLogix ControllerThis manual is a guide for using GuardLogix controllers. It describes the GuardLogix-specific procedures you use to configure, operate, and troubleshoot your controller.
The GuardLogix Controller system is certified for use in safety applications up to and including Safety Integrity Level (SIL) 3 and Category (CAT) 4 in which the de-energized state is the safe state. Safety application requirements include evaluating probability of failure rates (PFD and PFH), system reaction time settings, and functional verification tests that fulfill SIL 3 criteria.
Associated Catalog Number• 1756-L61S, 1756-L62S, 1756-LSP
GuardLogix Safety Application Instruction Set Reference ManualPublication Number 1756-RM095
Safety Application Instructions
This reference manual describes the GuardLogix Safety Application Instruction Set for Safety Integrity Level (SIL) 3, Category (CAT) 4 applications.
The GuardLogix Safety controller is part of a de-energize to trip system. This means that all of its outputs are set to zero when a fault is detected. In addition, the GuardLogix Safety controller automatically sets any input values associated with faulty input modules to zero.
Associated Catalog Number• 1756-L61S, 1756-L62S, 1756-LSP
GuardLogix Controller System Safety Reference ManualPublication Number 1756-RM093
Safety System Details for a GuardLogix ControllerThis manual is intended to describe the GuardLogix Controller system, which is type-approved and certified for use in safety applications up to and including SIL 3 according to IEC 61508, and applications up to and including category (CAT) 4, according to EN954-1. You must read and understand the safety concepts and requirements presented in this manual prior to operating a GuardLogix controller-based safety system.
Associated Catalog Number• 1756-L61S, 1756-L62S, 1756-LSP
Motion and Safety GuardLogix Controllers White PaperPublication Number 1756-WP004
Motion Considerations for a GuardLogix ControllerThis white describes the considerations for designing safety controller systems that include motion applications. Motion and safety may have very high performance requirements that depend on how high-performance is defined within the application and how the performance needs are addressed.
Associated Catalog Number• 1756-L61S, 1756-L62S, 1756-LSP
Publication IASIMP-RM001B-EN-E - September 2008
Logix5000 Controller Resources 13
1794 FlexLogix Controllers
• For common controller documentation, see All Logix5000 Controllers.• For common programming documentation, see All Logix5000 Programming Languages.
Resource Description
FlexLogix Selection GuidePublication number 1794-SG001
Plan a FlexLogix SystemThis guide provides selection criteria to determine which FlexLogix controller fits your application. This guide also provides product specifications and descriptions to help design a FlexLogix system and select the appropriate components.
Associated Catalog Numbers• 1794-L34
FlexLogix System User ManualPublication number 1794-UM001
Configure, Program, and Operate a SoftLogix5800 ControllerUse this manual to become familiar with the SoftLogix5800 controller and its features.
This manual describes the necessary tasks to configure, program, and operate a SoftLogix5800 system. In some cases, this manual includes references.
Associated Catalog Numbers• 1794-L34
Publication IASIMP-RM001B-EN-E - September 2008
14 Logix5000 Controller Resources
1789 SoftLogix5800 Controllers
• For common controller documentation, see All Logix5000 Controllers.• For common programming documentation, see All Logix5000 Programming Languages.
Resource Description
SoftLogix5800 Selection GuidePublication number 1789-SG001
Plan a SoftLogix5800 SystemThis guide provides selection criteria to determine which SoftLogix5800 controller fits your application. This guide also provides product specifications and descriptions to help design a SoftLogix5800 system and select the appropriate components.
Associated Catalog Numbers• 1789-L10, 1789-L30, 1789-L60
SoftLogix5800 System User ManualPublication number 1789-UM002
Configure, Program, and Operate a SoftLogix5800 ControllerUse this manual to become familiar with the SoftLogix5800 controller and its features.
This manual describes the necessary tasks to configure, program, and operate a SoftLogix5800 system. In some cases, this manual includes references.
Associated Catalog Numbers• 1789-L10, 1789-L30, 1789-L60
Publication IASIMP-RM001B-EN-E - September 2008
Logix5000 Controller Resources 15
DriveLogix Controllers
• For common controller documentation, see All Logix5000 Controllers.• For common programming documentation, see All Logix5000 Programming Languages.
Resource Description
DriveLogix5730 Controller for PowerFlex 700S Drives with Phase 2 ControlPublication number 20D-UM003
Configure and Operate the 5730 DriveLogix SystemThis manual guides the development of projects for DriveLogix controllers. It provides procedures on how to establish communications:
• over ControlNet, DeviceNet, EtherNet/IP, and serial networks.• with PowerFlex 700S phase 2 drives, controllers, I/O, workstations, and PanelView
terminalsAssociated Products
• 20D PowerFlex 700S Phase 2
Publication IASIMP-RM001B-EN-E - September 2008
16 Logix5000 Controller Resources
Notes:
Publication IASIMP-RM001B-EN-E - September 2008
Network Resources
NetLinx Networks
Resource Description
NetLinx Selection GuidePublication number NETS-SG001
Select a NetworkThis guide provides selection criteria to determine which network fits your application. This guide also provides product specifications and descriptions to help select network components.
Associated Products• EtherNet/IP networks• ControlNet networks• DeviceNet networks
17 Publication IASIMP-RM001B-EN-E - September 2008
18 Network Resources
EtherNet/IP Networks
Resource Description
EtherNet/IP Media Planning and Installation GuidePublication number ENET-IN001
EtherNet/IP Cable RequirementsThis manual is intended for control engineers who are responsible for designing, implementing, and maintaining an industrial control system using EtherNet/IP (Ethernet Industrial Protocol). This manual describes the required media components and how to plan for and install these required components.
EtherNet/IP Performance Application GuidePublication Number ENET-AP001
EtherNet/IP Performance in Logix5000 SystemsThis document help you plan your EtherNet/IP network and describes considerations for improving overall network performance. This document provides an application example to help estimate the performance of an EtherNet/IP control system.
Associated Products• Logix5000 controllers• 1756-ENBT, 1756-ENET
EtherNet/IP Modules in Logix5000 Control Systems User ManualPublication number ENET-UM001
Configure and Operate EtherNet/IP Modules in Logix5000 SystemsThis document describes how to use EtherNet/IP modules in Logix5000 control systems.
Associated Catalog Numbers• 1756-ENBT, 1768-ENBT, 1788-ENBT• 1769-L32E, 1769-L35E• 1794-AENT
EtherNet/IP Web Server Module User ManualPublication number ENET-UM527
Configure and Operate EtherNet/IP Web Server Modules in Logix5000 SystemsThis document describes how to use the EtherNet/IP web server module. The web server module enhances EtherNet/IP control systems so you can monitor and modify data remotely via XML web pages.
Associated Catalog Numbers• 1756-EWEB• 1768-EWEB
POINT I/O EtherNet/IP Adapter Module User ManualPublication number 1734-UM011
Configure and Operate the POINT I/O EtherNet/IP Adapter ModuleThis manual describes how to install and configure the 1734-AENT adapter and provides examples showing how to use the adapter to communicate with POINT I/O modules over an EtherNet/IP network.
Associated Catalog Numbers• 1734-AENT
PowerFlex Architecture Class (7-Class) EtherNet/IP Adapter User ManualPublication number 20COMM-UM010
Install, Configure, Program, and Troubleshoot the EtherNet/IP Adapter for PowerFlex 7-Class Drives
This manual describes how to use the 20-COMM-E adapter with PowerFlex 70, 700, and PowerFlex 7000 drives.
Associated Catalog Numbers• 20A - PowerFlex 70/70EC• 20B - PowerFlex 700VC• 20C - PowerFlex 700H• 20D - PowerFlex 700S Phase 2• 20L - PowerFlex 700L• 7000 - PowerFlex 7000
Publication IASIMP-RM001B-EN-E - September 2008
Network Resources 19
PowerFlex Component Class (4-Class) EtherNet/IP Adapter User ManualPublication number 22COMM-UM004
Install, Configure, Program, and Troubleshoot the EtherNet/IP Adapter for PowerFlex 4-Class DrivesThis manual describes how to use the 22-COMM-E adapter with PowerFlex 4 and PowerFlex 40 drives.
Associated Catalog Numbers• 22A PowerFlex 4• 22B PowerFlex 40• 22C PowerFlex 400• 22D PowerFlex 40P• 22F PowerFlex 4M
Resource Description
Publication IASIMP-RM001B-EN-E - September 2008
20 Network Resources
Stratix Ethernet Switches
Resource Description
Stratix 8000 Ethernet Managed Switches Hardware User ManualPublication number 1783-UM002
Install, Configure, and Troubleshoot a Stratix 8000 SwitchThis publication describes the physical and performance characteristics of the Stratix 8000 Ethernet managed switches. In addition, this publication provides installation, operation, and maintenance information.
Associated Products• 1783 Stratix 8000 switches
Stratix 8000 Ethernet Managed Switches Software User ManualPublication number 1783-UM003
Configure and Manage a Stratix 8000 SwitchThis publication describes how to manage Stratix 8000 Ethernet managed switches.
Associated Products• 1783 Stratix 8000 switches
Publication IASIMP-RM001B-EN-E - September 2008
Network Resources 21
ControlNet Networks
Resource Description
ControlNet Fiber Media Planning and Installation GuidePublication number CNET-IN001
ControlNet Fiber Media RequirementsThis manual describes the required components of a ControlNet fiber network and how to plan for and install the required components.
Associated Products• 1786 series• 1786-FSKIT• 1786-RPA, 1786-RPCD, 1786-RPFM, 1786-RPFRL, 1786-RPFRXL, 1786-RPFS
ControlNet Coax Media Planning and Installation GuidePublication number CNET-IN002
ControlNet Coax Media RequirementsThis manual describes the required components of a ControlNet coax network and how to plan for and install the required components.
Associated Products• 1786 series
ControlNet Modules in Logix5000 Control Systems User ManualPublication number CNET-UM001
Configure and Operate ControlNet Modules in Logix5000 SystemsThis manual describes how to use ControlNet modules in a Logix5000 control system. With this manual, you can learn how to communicate between your controller and various devices on the ControlNet network. The ControlNet communications modules:
Associated Catalog Numbers• 1734-ACNR• 1756-CNB, 1756-CNBR• 1769-L32C, 1769-L35CR• 1784-PCC, 1784-PCIC, 1784-PCICS, 1784-PKTCS• 1788-CNC, 1788-CNCR, 1788-CNF, 1788-CNFR• 1794-ACN15, 1794-ACNR15, 1797-ACNR15
POINT I/O ControlNet Adapter Module User ManualPublication number 1734-UM008
Configure and Operate the POINT I/O ControlNet Adapter ModuleThis manual is a reference guide for the 1734-ACNR adapter module. It describes the procedures you use to install, program, and troubleshoot your module. This manual also includes several application examples.
Associated Catalog Numbers• 1734-ACNR
PowerFlex Architecture Class (7-Class) ControlNet Adapter User ManualPublication number 20COMM-UM003
Install, Configure, Program, and Troubleshoot the ControlNet Adapter for PowerFlex 7-Class Drives
This manual describes how to use the 20-COMM-C adapter with PowerFlex 70, 700, and PowerFlex 7000 drives.
Associated Catalog Numbers• 20A - PowerFlex 70/70EC• 20B - PowerFlex 700VC• 20C - PowerFlex 700H• 20D - PowerFlex 700S Phase 2• 20L - PowerFlex 700L• 7000 - PowerFlex 7000
Publication IASIMP-RM001B-EN-E - September 2008
22 Network Resources
PowerFlex Component Class (4-Class) ControlNet Adapter User ManualPublication number 22COMM-UM006
Install, Configure, Program, and Troubleshoot the ControlNet Adapter for PowerFlex 4-Class DrivesThis manual describes how to use the 22-COMM-C adapter with PowerFlex 4 and PowerFlex 40 drives.
Associated Catalog Numbers• 22A PowerFlex 4• 22B PowerFlex 40• 22C PowerFlex 400• 22D PowerFlex 40P• 22F PowerFlex 4M
Getting Results with RSNetWorx for ControlNetPublication number CNET-GR001
Install and Use RSNetWorx for ControlNet SoftwareThis getting results guide provides you with information on how to install and navigate the RSNetWorx for ControlNet software. It explains how to use the RSNetWorx for ControlNet software and how to access and navigate the online help.
Associated Catalog Numbers• 9357-ANETL3, 9357-CNETL3• 9324-RLD series
Resource Description
Publication IASIMP-RM001B-EN-E - September 2008
Network Resources 23
DeviceNet Networks
Resource Description
DeviceNet Modules in Logix5000 Control Systems User ManualPublication number DNET-UM004
Configure and Operate DeviceNet Modules in Logix5000 SystemsThis manual guides the development of a control system that uses a Logix5000 controller and a DeviceNet network.
Associated Catalog Numbers• 1734-ADN, 1734-ADNX, 1734-PDN• 1756-DNB, 1769-SDN, 1784-PCIDS• 1788-CN2DN, 1788-DNBO• 1788-EN2DN• 1794-ADN
POINT I/O DeviceNet Adapter Module User ManualPublication number 1734-UM002
Configure and Operate the POINT I/O DeviceNet Adapter ModuleThis manual is a reference guide for the POINT I/O DeviceNet adapter module. It describes the procedures you use to install, program, and troubleshoot your module. This manual also includes several application examples.
Associated Catalog Numbers• 1734-ADN, 1734-ADNX
ArmorPoint I/O DeviceNet Adapter Module User ManualPublication number 1738-UM001
Configure and Operate the ArmorPoint I/O DeviceNet Adapter ModuleThis manual is a reference guide for the ArmorPoint I/O DeviceNet adapter module. It describes the procedures you use to install, program, and troubleshoot your module. This manual also includes several application examples.
Associated Catalog Numbers• 1738-ADN12, 1738-ADN18, 1738-ADN18P, 1738-ADNX
Compact I/O DeviceNet Adapter Module User ManualPublication number 1769-UM001
Configure and Operate the Compact I/O DeviceNet Adapter ModuleThis manual is a reference guide for the Compact I/O DeviceNet adapter module. It describes the procedures you use to install, program, and troubleshoot your module. This manual also includes several application examples.
Associated Catalog Numbers• 1769-ADN
Compact I/O DeviceNet Scanner Module User ManualPublication number 1769-UM009
Configure and Operate the Compact I/O DeviceNet Scanner ModuleThis manual is a reference guide for the Compact I/O DeviceNet scanner module. It describes the procedures you use to install, program, and troubleshoot your module. This manual also includes several application examples.
Associated Catalog Numbers• 1769-SDN
Publication IASIMP-RM001B-EN-E - September 2008
24 Network Resources
PowerFlex Architecture Class (7-Class) DeviceNet Adapter User ManualPublication number 20COMM-UM002
Install, Configure, Program, and Troubleshoot the DeviceNet Adapter for PowerFlex 7-Class Drives
This manual describes how to use the 20-COMM-D adapter with PowerFlex 70, 700, and PowerFlex 7000 drives.
Associated Catalog Numbers• 20A - PowerFlex 70/70EC• 20B - PowerFlex 700VC• 20C - PowerFlex 700H• 20D - PowerFlex 700S Phase 2• 20L - PowerFlex 700L• 7000 - PowerFlex 7000
PowerFlex Component Class (4-Class) DeviceNet Adapter User ManualPublication number 22COMM-UM003
Install, Configure, Program, and Troubleshoot the DeviceNet Adapter for PowerFlex 4-Class DrivesThis manual describes how to use the 22-COMM-D adapter with PowerFlex 4 and PowerFlex 40 drives.
Associated Catalog Numbers• 22A PowerFlex 4• 22B PowerFlex 40• 22C PowerFlex 400• 22D PowerFlex 40P• 22F PowerFlex 4M
Getting Results with RSNetWorx for DeviceNetPublication number DNET-GR001
Install and Use RSNetWorx for DeviceNet SoftwareThis getting results guide provides you with information on how to install and navigate the RSNetWorx for DeviceNet software. It explains how to use the RSNetWorx for DeviceNet software and how to access and navigate the online help.
Associated Catalog Numbers• 9357-ANETL3, 9357-DNETL3• 9324-RLD series
DeviceLogix User ManualPublication number ACIG-UM001
Install and Use DeviceLogix SoftwareThis manual describes how to use the DeviceLogix editor with RSLogix for Devicenet software to configure and maintain DeviceNet I/O devices.
Associated Products• DeviceLogix-capable devices
Resource Description
Publication IASIMP-RM001B-EN-E - September 2008
Distributed I/O Resources
1732/1792D ArmorBlock I/O
• For network connectivity, see EtherNet/IP Networks, ControlNet Networks, and DeviceNet Networks.
Resource Description
ArmorBlock I/O Selection GuidePublication number 1792-SG001
Plan an ArmorBlock I/O SystemThis guide provides selection criteria to determine which ArmorBlock I/O modules fit your application. This guide also provides product specifications and descriptions to help design an ArmorBlock I/O system and select the appropriate components.
Associated Products• 1732 series• 1792D series
25 Publication IASIMP-RM001B-EN-E - September 2008
26 Distributed I/O Resources
1732DS/1791DS/1791ES Guard Safety I/O
For network connectivity, see EtherNet/IP Networks and DeviceNet Networks.
Resource Description
Guard I/O DeviceNet Safety Modules User ManualPublication number 1791DS-UM001
Configure, Program, and Operate Guard I/O DeviceNet Safety ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot Guard I/O DeviceNet safety modules.
Associated Products• 1732DS series• 1791DS series
Guard I/O EtherNet/IP Safety Modules User ManualPublication number 1791ES-UM001
Configure, Program, and Operate Guard I/O EtherNet/IP Safety ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot Guard I/O DeviceNet safety modules.
Associated Products• 1791ES series
Publication IASIMP-RM001B-EN-E - September 2008
Distributed I/O Resources 27
1734 POINT I/O
• For network connectivity, see EtherNet/IP Networks, ControlNet Networks, and DeviceNet Networks.
Resource Description
POINT I/O Selection GuidePublication number 1734-SG001
Plan a POINT I/O SystemThis guide provides selection criteria to determine which POINT I/O modules fit your application. This guide also provides product specifications and descriptions to help design a POINT I/O system and select the appropriate components.
Associated Products• 1734 series
POINT I/O Digital and Analog Modules and POINTBlock I/O Modules User ManualPublication number 1734-UM001
Configure, Program, and Operate POINT I/O and POINTBlock I/O ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot POINT I/O digital and analog modules and POINTBlock I/O modules.
Associated Catalog NumbersPOINT I/O Digital Modules
• 1734-IA2, 1734-IB2, 1734-IB4, 1734-IB8, 1734-IM2, 1734-IV2, 1734-IV4, 1734-IV8, 1734-OA2, 1734-OB2, 1734-OB2EP, 1734-OB2E, 1734-OB4, 1734-OB4E, 1734-OB8, 1734-OB8E, 1734-OV2E, 1734-OV4E, 1734-OV8E, 1734-OW2, 17340-OW4, 1734-OX2
POINT I/O Analog Modules
• 1734-IE2C, 1734-IE2V, 1734-OE2C, 1734-OE2VPOINTBlock I/O Modules
• 1734D-IA16, 1734D-IA8XOA8, 1734D-IA8XOW8, 1734D-IB16, 1734D-IB8XOB8, 1734D-IB8XOW8
POINT I/O Encoder/Counter Modules User ManualPublication number 1734-UM006
Configure, Program, and Operate POINT I/O Encoder/Counter ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot POINT I/O encoder and counter modules.
Associated Catalog Numbers• 1734-IJ, 1734-IK
POINT I/O Very High Speed Counter Modules User ManualPublication number 1734-UM003
Configure, Program, and Operate POINT I/O Very High Speed Counter ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot POINT I/O very high speed counter modules.
Associated Catalog Numbers• 1734-VHSC5, 1734-VHSC24
POINT I/O ASCII Modules User ManualPublication number 1734-UM009
Configure, Program, and Operate POINT I/O ASCII ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot POINT I/O ASCII modules.
Associated Catalog Numbers• 1734-232ASC, 1734-485ASC
POINT I/O Thermocouple and RTD Input Modules User ManualPublication number 1734-UM004
Configure, Program, and Operate POINT I/O Thermocouple and RTD ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot POINT I/O thermocouple and RTD input modules.
Associated Catalog Numbers• 1734-IT2I,1734-IR2, 1734-IR2E
Publication IASIMP-RM001B-EN-E - September 2008
28 Distributed I/O Resources
1738 ArmorPoint I/O
• For network connectivity, see EtherNet/IP Networks, ControlNet Networks, and DeviceNet Networks.
Resource Description
ArmorPoint I/O Selection GuidePublication number 1738-SG001
Plan an ArmorPoint I/O SystemThis guide provides selection criteria to determine which ArmorPoint I/O modules fit your application. This guide also provides product specifications and descriptions to help design an ArmorPoint I/O system and select the appropriate components.
Associated Products• 1738 series
Publication IASIMP-RM001B-EN-E - September 2008
Distributed I/O Resources 29
1769 Compact I/O
Resource Description
Compact I/O Selection GuidePublication number 1769-SG002
Plan a Compact I/O SystemThis guide provides selection criteria to determine which Compact I/O modules fit your application. This guide also provides product specifications and descriptions to help design a Compact I/O system and select the appropriate components.
Associated Catalog Numbers• 1769-ADN, 1769-IQ6XOW4, 1769-OW8, 1769-OB16P, 1769-OW8I, 1769-IA16,
1769-IQ16, 1769-OB16, 1769-OA8, 1769-OV16, 1769-IM12, 1769-IA8I, 1769-ECR, 1769-ECL, 1769-IF4, 1769-OF2, 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4
Compact I/O Analog Modules User ManualPublication number 1769-UM002
Configure, Program, and Operate Compact I/O Analog ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot Compact I/O analog modules.
Associated Catalog Numbers• 1769-IF4, 1769-IF8, 1769-OF2, 1769-OF8C, 1769-OF8V
Compact I/O Isolated Analog Modules User ManualPublication number 1769-UM014
Configure, Program, and Operate Compact I/O Isolated Analog ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot Compact I/O isolated analog modules.
Associated Catalog Numbers• 1769-IF4I, 1769-OF4CI, 1769-OF4VI
Compact I/O Analog Combination Module User ManualPublication number 1769-UM008
Configure, Program, and Operate the Compact I/O Analog Combination ModuleThis manual describes the necessary tasks to configure, operate, and troubleshoot the Compact I/O analog combination module.
Associated Catalog Numbers• 1769-IF4XOF2
Compact I/O High Speed Counter Module User ManualPublication number 1769-UM006
Configure, Program, and Operate the Compact I/O High Speed Counter ModuleThis manual describes the necessary tasks to configure, operate, and troubleshoot the Compact I/O high speed counter module.
Associated Catalog Numbers• 1769-HSC
Compact I/O RTD Input Module User ManualPublication number 1769-UM005
Configure, Program, and Operate the Compact I/O RTD Input ModuleThis manual describes the necessary tasks to configure, operate, and troubleshoot the Compact I/O RTD input module.
Associated Catalog Numbers• 1769-IR6
Compact I/O Thermocouple Input Module User ManualPublication number 1769-UM004
Configure, Program, and Operate the Compact I/O Thermocouple Input ModuleThis manual describes the necessary tasks to configure, operate, and troubleshoot the Compact I/O thermocouple input module.
Associated Catalog Numbers• 1769-IT6
Publication IASIMP-RM001B-EN-E - September 2008
30 Distributed I/O Resources
• For network connectivity, see EtherNet/IP Networks, ControlNet Networks, and DeviceNet Networks.
Compact I/O ASCII Module User ManualPublication number 1769-UM012
Configure, Program, and Operate the Compact I/O ASCII ModuleThis manual describes the necessary tasks to configure, operate, and troubleshoot the Compact I/O ASCII module.
Associated Catalog Numbers• 1769-ASCII
Compact I/O BOOLEAN Module User ManualPublication number 1769-UM016
Configure, Program, and Operate the Compact I/O BOOLEAN ModuleThis manual describes the necessary tasks to configure, operate, and troubleshoot the Compact I/O BOOLEAN module.
Associated Catalog Numbers• 1769-BOOLEAN
Resource Description
Publication IASIMP-RM001B-EN-E - September 2008
Distributed I/O Resources 31
1790/1790D CompactBlock LDX I/O
• For network connectivity, see DeviceNet Networks.
Resource Description
CompactBlock LDX I/O For DeviceNet Technical DataPublication number 1790D-TD001
Plan a CompactBlock LDX I/O SystemThis guide provides selection criteria to determine which CompactBlock LDX I/O modules fit your application. This guide also provides product specifications and descriptions to help design a CompactBlock LDX I/O system and select the appropriate components.
Associated Products• 1790 series• 1790D series
CompactBlock LDX I/O Analog Modules User ManualPublication number 1790-UM001
Configure, Program, and Operate CompactBlock LDX I/O Analog ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot CompactBlock LDX I/O analog modules.
Associated Catalog Numbers• 1790D-N4CO, 1790D-TN4CO, 1790D-N4VO, 1790D-TN4VO, 1790D-NOC2,
1790D-TNOC2, 1790D-NOV2, 1790D-TNOV2
CompactBlock LDX I/O RTD/Resistance Input Modules User ManualPublication number 1790-UM002
Configure, Program, and Operate CompactBlock LDX I/O RTD ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot CompactBlock LDX I/O RTD modules.
Associated Catalog Numbers• 1790D-T4R0, 1790D-4R0, 1790P-T4R0, 1790P-4R0
CompactBlock LDX I/O Thermocouple Modules User ManualPublication number 1790-UM003
Configure, Program, and Operate CompactBlock LDX I/O Thermocouple ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot CompactBlock LDX I/O thermocouple modules.
Associated Catalog Numbers• 1790D-T4T0, 1790D-4T0, 1790P-T4T0
Publication IASIMP-RM001B-EN-E - September 2008
32 Distributed I/O Resources
1791D/1791R CompactBlock I/O
• For network connectivity, see DeviceNet Networks.
Resource Description
CompactBlock I/O For DeviceNet Technical DataPublication number 1791D-TD001
Plan a CompactBlock I/O for DeviceNet SystemThis guide provides selection criteria to determine which CompactBlock I/O modules fit your application. This guide also provides product specifications and descriptions to help design a CompactBlock I/O system and select the appropriate components.
Associated Products• 1791D series
CompactBlock I/O For Remote I/O Technical DataPublication number 1791R-TD001
Plan a CompactBlock I/O for Remote I/O SystemThis guide provides selection criteria to determine which CompactBlock I/O modules fit your application. This guide also provides product specifications and descriptions to help design a CompactBlock I/O system and select the appropriate components.
Associated Catalog Numbers• 1791R-RB4P, 1791R-8B8P, 1791R-8V8P, 1791R-16BO, 1791R-OB16P
Publication IASIMP-RM001B-EN-E - September 2008
Distributed I/O Resources 33
1794 FLEX I/O
Resource Description
FLEX and FLEX Ex I/O Selection GuidePublication number 1794-SG002
Plan a FLEX I/O SystemThis guide provides selection criteria to determine which FLEX I/O modules fit your application. This guide also provides product specifications and descriptions to help design a FLEX I/O system and select the appropriate components.
Associated Products• 1794 series• 1797 series
FLEX I/O Diagnostic Modules User ManualPublication number 1794-UM061
Configure, Program, and Operate FLEX I/O Diagnostic ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot FLEX I/O diagnostic modules.
Associated Catalog Numbers• 1794-IB16D, 1794-OB16D
FLEX I/O Analog Modules User ManualPublication number 1794-6.5.2
Configure, Program, and Operate FLEX I/O Analog ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot FLEX I/O analog modules.
Associated Catalog Numbers• 1794-IE8, 1794-OE4, 1794-IE4XOE2
FLEX I/O Isolated Analog Modules User ManualPublication number 1794-6.5.8
Configure, Program, and Operate FLEX I/O Isolated Analog ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot FLEX I/O isolated analog modules.
Associated Catalog Numbers• 1794-IF4I, 1794-OF4I, 1794-IF2XOF2I
FLEX I/O Thermocouple Module User ManualPublication number 1794-6.5.7
Configure, Program, and Operate the FLEX I/O Thermocouple ModuleThis manual describes the necessary tasks to configure, operate, and troubleshoot the FLEX I/O thermocouple module.
Associated Catalog Numbers• 1794-IT8
FLEX I/O RTD Module User ManualPublication number 1794-6.5.4
Configure, Program, and Operate the FLEX I/O RTD ModuleThis manual describes the necessary tasks to configure, operate, and troubleshoot the FLEX I/O RTD module.
Associated Catalog Numbers• 1794-IT8
FLEX I/O Thermocouple/RTD Module User ManualPublication number 1794-6.5.12
Configure, Program, and Operate the FLEX I/O Thermocouple/RTD ModuleThis manual describes the necessary tasks to configure, operate, and troubleshoot the FLEX I/O thermocouple/RTD module.
Associated Catalog Numbers• 1794-IRT8
Publication IASIMP-RM001B-EN-E - September 2008
34 Distributed I/O Resources
• For network connectivity, see EtherNet/IP Networks, ControlNet Networks, and DeviceNet Networks.
FLEX I/O Incremental Encoder Module User ManualPublication number 1794-UM015
Configure, Program, and Operate the FLEX I/O Incremental Encoder ModuleThis manual describes the necessary tasks to configure, operate, and troubleshoot the FLEX I/O incremental encoder module.
Associated Catalog Numbers• 1794-ID2
FLEX I/O Frequency Input Module User ManualPublication number 1794-6.5.11
Configure, Program, and Operate the FLEX I/O Frequency Input ModuleThis manual describes the necessary tasks to configure, operate, and troubleshoot the FLEX I/O frequency input module.
Associated Catalog Numbers• 1794-IJ
FLEX I/O Very High-speed Counter Module User ManualPublication number 1794-UM010
Configure, Program, and Operate the FLEX I/O Very High-speed Counter ModuleThis manual describes the necessary tasks to configure, operate, and troubleshoot the FLEX I/O very high-speed counter module.
Associated Catalog Numbers• 1794-VHSC
FLEX I/O Pulse Counter Module User ManualPublication number 1794-UM016
Configure, Program, and Operate the FLEX I/O Pulse Counter ModuleThis manual describes the necessary tasks to configure, operate, and troubleshoot the FLEX I/O pulse counter module.
Associated Catalog Numbers• 1794-IP4
Resource Description
Publication IASIMP-RM001B-EN-E - September 2008
Distributed I/O Resources 35
1797 FLEX Ex I/O
• For network connectivity, see EtherNet/IP Networks, ControlNet Networks, and DeviceNet Networks.
Resource Description
FLEX and FLEX Ex I/O Selection GuidePublication number 1794-SG002
Plan a FLEX Ex I/O SystemThis guide provides selection criteria to determine which FLEX Ex I/O modules fit your application. This guide also provides product specifications and descriptions to help design a FLEX Ex I/O system and select the appropriate components.
Associated Products• 1794 series• 1797 series
FLEX Ex I/O Analog Modules User ManualPublication number 1797-6.5.1
Configure, Program, and Operate FLEX Ex I/O Analog ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot FLEX Ex I/O analog modules.
Associated Catalog Numbers• 1797-IE8, 1797-IE8NF, 1797-OE8
FLEX Ex I/O Thermocouple/RTD Module User ManualPublication number 1797-6.5.2
Configure, Program, and Operate the FLEX Ex I/O Thermocouple/RTD Analog ModuleThis manual describes the necessary tasks to configure, operate, and troubleshoot the FLEX Ex I/O thermocouple/RTD analog module.
Associated Catalog Numbers• 1797-IRT8
Publication IASIMP-RM001B-EN-E - September 2008
36 Distributed I/O Resources
1799 Embedded I/O for DeviceNet
• For network connectivity, see DeviceNet Networks.
Resource Description
Embedded I/O for DeviceNet Selection GuidePublication number 1799-SG001
Plan an Embedded I/O DeviceNet SystemThis guide provides selection criteria to determine which embedded I/O modules fit your application.
Associated Products• 1799 series
Embedded I/O for DeviceNet Technical DataPublication number 1799-TD001
Select Embedded I/O ComponentsThis guide provides product specifications and descriptions to help design an embedded I/O DeviceNet system and select the appropriate components.
Associated Products• 1799 series
Publication IASIMP-RM001B-EN-E - September 2008
Operator Interface Resources
PanelView Plus and PanelView Plus CE Terminals
Resource Description
Visualization Platforms Selection GuidePublication number VIEW-SG001
Plan System VisualizationThis guide provides selection criteria to determine which operator interface fits your application. This guide also provides product specifications and descriptions to help design a system and select the appropriate components.
Associated Products• 2706, 2707, 2711P, 2711, 2711E, 2727 series• 6182H, 6181P, 6155R, 6180W, 6186 series
PanelView Plus Terminals User Manual
Publication number 2711P-UM001
Configure and Operate PanelView Plus TerminalsUse this manual to install, operate, and troubleshoot PanelView Plus terminals.
Associated Catalog Numbers• PanelView Plus 400, 600, 700, 1000, 1250, 1500 terminals
ControlNet Communications for PanelView Plus and PanelView Plus CE Terminals User Manual
Publication number 2711P-UM003
Configure ControlNet CommunicationsUse this guide to:
• Configure ControlNet unscheduled communications• Configure ControlNet scheduled communications• Upgrade a 2711P-RN15S Series A, Revision A ControlNet communication module
Associated Products• PanelView Plus terminals• PanelView Plus CE terminals
DeviceNet Communications for PanelView Plus and PanelView Plus CE Terminals User Manual
Publication number 2711P-UM004
Configure DeviceNet CommunicationsThis guide shows how to configure DeviceNet communications between a PanelView Plus terminal and a ControlLogix controller. This guide shows how to configure a PanelView Plus terminal as a slave and a scanner using RSView Studio Machine Edition software, RSNetWorx for DeviceNet software, and RSLogix 5000 programming software.
Associated Products• PanelView Plus terminals• PanelView Plus CE terminals
Software Development Kit User Manual
Publication number 2711P-UM005
Create Software ApplicationsUse this manual to develop application software to run on PanelView Plus CE terminals. This manual gives an overview of the system and provides detailed information about the software development kit.
Associated Products• PanelView Plus CE terminals
Creating Modbus Applications for PanelView Plus and PanelView Plus CE Terminals User Manual
Publication number 2711P-UM002
Configure Drivers for Modbus ApplicationsThis guide shows how to configure KEPServer drivers, specifically Modbus drivers, for RSView ME applications that run on:
• PanelView Plus CE terminals• PanelView Plus terminals• Windows 2000/XP environment
Associated Products• PanelView Plus terminals• PanelView Plus CE terminals
37 Publication IASIMP-RM001B-EN-E - September 2008
38 Operator Interface Resources
FactoryTalk View Software
Resource Description
FactoryTalk View Machine Edition User Guide Volume 1
Publication number VIEWME-UM004
Develop FactoryTalk View ME ApplicationsComprehensive information about FactoryTalk View Machine Edition, procedures for creating and running an automation application, and reference information. This volume covers:
• Working with applications• Using tags, graphic displays, and graphic objects• Configuring communications, connections, alarms, data logging, and security
Associated Products• 9701 series
FactoryTalk View Machine Edition User Guide Volume 2
Publication number VIEWME-UM005
Develop FactoryTalk View ME ApplicationsComprehensive information about FactoryTalk View Machine Edition, procedures for creating and running an automation application, and reference information. This volume covers:
• Using expressions, embedded variables, and macros• Configuring trends, language switching, and display navigation• Running an application• Converting PanelBuilder applications
Associated Products• 9701 series
FactoryTalk View Site Edition User Guide Volume 1
Publication number VIEWSE-UM004
Develop FactoryTalk View SE ApplicationsComprehensive information about FactoryTalk View Site Edition, procedures for creating and running an automation application, and reference information. This volume covers:
• Working with applications• Setting up FactoryTalk Directory• Creating HMI and derived tags• Configuring communications, alarms, events, data logging, and security
Associated Products• 9701 series
FactoryTalk View Site Edition User Guide Volume 2
Publication number VIEWSE-UM005
Develop FactoryTalk View SE ApplicationsComprehensive information about FactoryTalk View Site Edition, procedures for creating and running an automation application, and reference information. This volume covers:
• Creating graphic objects• Working with trends• Creating expressions, embedded variables, and macros• Configuring language switching• Configuring redundancy• Deploying applications
Associated Products• 9701 series
Publication IASIMP-RM001B-EN-E - September 2008
Motion Control Resources
Motion Control Servo Drives
Resource Description
Kinetix Motion Control Selection GuidePublication number GMC-SG001
Plan a Kinetix SystemThis guide provides selection criteria to determine which Kinetix servo drive controller fits your application. This guide also provides product specifications and descriptions to help design a motion control system and select the appropriate components.
Associated Products• MP-Series, HPK-Series, TL-Series, 1326AB, F-Series, Y-Series rotary motion• MP-Series linear motion• 1756, 1768, 1784 Logix5000 motion modules• 2093, 2094, 2099, 2098, 2092 drives• 2090, 1394, 1326 accessories
Kinetix Accelerator Toolkit Quick StartPublication number IASIMP-QS002
Basic Procedures for New UsersThis quick start provides examples of using Kinetix servo drives. These examples were designed to get servo drives installed and communicating with each other in the simplest way possible. The programming involved is not complex, and offers easy solutions to verify that servo drives are communicating properly.
Associated Products• 2094 Kinetix 6000 servo drives• CompactLogix controllers and motion modules• ControlLogix controllers and motion modules• SoftLogix5800 controllers and motion modules• PanelView Plus terminals
System Design for Control of Electrical Noise Reference ManualPublication number GMC-RM001
Avoid Noise-related IssuesThis manual outlines practices to minimize noise-related failures and that comply with noise regulations. It gives you an overview of how electrical noise is generated (sources), how the noise interferes with routine operation of drive equipment (victims), and examples of how to effectively control noise.
Associated Products• 2093 Kinetix 2000 servo drives• 2094 Kinetix 6000 servo drives• 2099 Kinetix 7000 servo drives
Kinetix Safe-off Feature Safety Reference ManualPublication number GMC-RM002
Wire and Install Safe-off DrivesThis manual provides detailed installation instructions for wiring and troubleshooting your Kinetix 6000 and Kinetix 7000 safe-off drives. This manual includes interconnect diagrams with Allen-Bradley safety relays, GuardLogix controllers, and GuardPLC controllers.
Associated Products• 2094 Kinetix 6000 servo drives• 2099 Kinetix 7000 servo drives
39 Publication IASIMP-RM001B-EN-E - September 2008
40 Motion Control Resources
Kinetix 2000 Servo Drives
• For common motion documentation, see Motion Control Servo Drives.
Resource Description
Kinetix 2000 Multi-axis Servo Drives User Manual
Publication number 2093-UM001
Configure and Operate Kinetix 2000 Servo DrivesThis manual provides detailed installation instructions for mounting, wiring, and troubleshooting your Kinetix 2000 drive, and system integration for your drive/motor combination with a Logix controller.
Associated Catalog Numbers• 2093-AC05-MP1, 2093-AC05-MP2, 2093-AC05-MP5• 2093-AM01, 2093-AM02• 2093-AMP1, 2093-AMP2, 2093-AMP5• 2093-PRS1, 2093-PRS2, 2093-PRS3, 2093-PRS4, 2093-PRS5,
2093-PRS7,2093-PRS8S• 2093-ASP06• 2093-PRF
Publication IASIMP-RM001B-EN-E - September 2008
Motion Control Resources 41
Kinetix 6000 Servo Drives
• For common motion documentation, see Motion Control Servo Drives.
Resource Description
Kinetix 6000 Multi-axis Servo Drives User Manual
Publication number 2094-UM001
Configure and Operate Kinetix 6000 Servo DrivesThis manual provides detailed installation instructions for mounting, wiring, and troubleshooting your Kinetix 6000 drive, and system integration for your drive/motor combination with a Logix controller.
Associated Catalog Numbers• 2094-AC05-MP5, 2094-AC05-M01, 2094-AC09-M02, 2094-AC16-M03,
2094-AC32-M05, 2094-BC01-MP5, 2094-BC01-M01, 2094-BC02-M02, 2094-BC04-M03, 2094-BC07-M05
• 2094-AC05-MP5-S, 2094-AC05-M01-S, 2094-AC09-M02-S, 2094-AC16-M03 -S, 2094-AC32-M05-S, 2094-BC01-MP5-S, 2094-BC01-M01-S, 2094-BC02-M02-S, 2094-BC04-M03-S, 2094-BC07-M05-S
• 2094-AMP5, 2094-AM01, 2094-AM02, 2094-AM03, 2094-AM05, 2094-BMP5, 2094-BM01, 2094-BM02, 2094-BM03, 2094-BM05
• 2094-AMP5-S, 2094-AM01-S, 2094-AM02-S, 2094-AM03-S, 2094-AM05-S, 2094-BMP5-S, 2094-BM01-S, 2094-BM02-S, 2094-BM03-S, 2094-BM05-S
• 2094-BSP2
Publication IASIMP-RM001B-EN-E - September 2008
42 Motion Control Resources
Kinetix 7000 Servo Drives
• For common motion documentation, see Motion Control Servo Drives.
Resource Description
Kinetix 7000 Multi-axis Servo Drives User Manual
Publication number 2099-UM001
Configure and Operate Kinetix 7000 Servo DrivesThis manual provides detailed installation instructions for mounting, wiring, and troubleshooting your Kinetix 7000 drive, and system integration for your drive/motor combination with a Logix controller.
Associated Catalog Numbers• 2099-BM06-S, 2099-BM07-S, 2099-BM08-S, 2099-BM09-S, 2099-BM10-S,
2099-BM11-S
Publication IASIMP-RM001B-EN-E - September 2008
Motion Control Resources 43
Ultra3000 Servo Drives
• For common motion documentation, see Motion Control Servo Drives.
Resource Description
Ultra3000 Digital Servo Drives Installation Manual
Publication number 2098-IN003
Install Ultra3000 Digital Servo DrivesUse this manual to design, install, and wire Ultra3000 digital servo drives (DSD).
Associated Catalog Numbers• 2098-DSD-005, 2098-DSD-010, 2098-DSD-020, 2098-DSD-xxxX, 2098-DSD-xxx-SE,
2098-DSD-xxx-DN, 2098-DSD-xxxX-DN• 2098-DSD-030, 2098-DSD-075, 2098-DSD-150, 2098-DSD-xxxX, 2098-DSD-xxx-SE,
2098-DSD-xxx-DN, 2098-DSD-xxxX-DN• 2098-DSD-HV030, 2098-DSD-HV050, 2098-DSD-HV100, 2098-DSD-HV150,
2098-DSD-HV220, 2098-DSD-HVxxxX, 2098-DSD-HVxxx-SE, 2098-DSD-HVxxx-DN, 2098-DSD-HVxxxX-DN
Ultra3000 Digital Servo Drives Integration Manual
Publication number 2098-IN005
Install Ultra3000 Digital Servo DrivesUse this manual to operate, maintain, and integrate Ultra3000 digital servo drives (DSD).
Associated Catalog Numbers• 2098-DSD-005, 2098-DSD-010, 2098-DSD-020, 2098-DSD-xxxX, 2098-DSD-xxx-SE,
2098-DSD-xxx-DN, 2098-DSD-xxxX-DN• 2098-DSD-030, 2098-DSD-075, 2098-DSD-150, 2098-DSD-xxxX, 2098-DSD-xxx-SE,
2098-DSD-xxx-DN, 2098-DSD-xxxX-DN• 2098-DSD-HV030, 2098-DSD-HV050, 2098-DSD-HV100, 2098-DSD-HV150,
2098-DSD-HV220, 2098-DSD-HVxxxX, 2098-DSD-HVxxx-SE, 2098-DSD-HVxxx-DN, 2098-DSD-HVxxxX-DN
Ultraware Software User Manual
Publication number 2098-UM001
Install and Use Ultraware Software
This manual shows how to use Ultraware software to configure and operate Ultra3000 drives. This manual also shows how to design, test, and run C language programs and cam tables on these drives.Associated Catalog Numbers
• 2098-UWCPRG
Publication IASIMP-RM001B-EN-E - September 2008
44 Motion Control Resources
Notes:
Publication IASIMP-RM001B-EN-E - September 2008
PowerFlex Resources
All PowerFlex Drives
Resource Description
Wiring and Ground Guidelines for PWM AC DrivesPublication number DRIVES-IN001
Wiring and Grounding GuidelinesThis document provides the basic information needed to properly wire and ground pulse width modulated (PWM) AC drives.
Safety Guidelines for Application, Installation, and Maintenance of Solid State ControlPublication number SGI-1.1
Safety GuidelinesThis document provides the basic safety guidelines needed to apply, install, and maintain solid state control devices.
Preventative Maintenance of Industrial Control and Drive System EquipmentPublication number DRIVES-TD001
Preventative Maintenance GuidelinesThis document provides basic preventative maintenance information for industrial control and drive equipment.
45 Publication IASIMP-RM001B-EN-E - September 2008
46 PowerFlex Resources
PowerFlex Component Class (4-Class) Drives
Resource Description
PowerFlex 4 User ManualPublication number 22A-UM001
Install, Wire, Start-up, Program, and Troubleshoot PowerFlex 4 DrivesThis manual shows how to install, wire, start-up, program, and troubleshoot PowerFlex 4 drives.
Associated Products• 22A PowerFlex 4
PowerFlex 4 Quick StartPublication number 22A-QS001
Quick Start GuideThis guide summarizes the basic steps to install, start-up, and program PowerFlex 4 drives.
Associated Products• 22A PowerFlex 4
PowerFlex 4M User ManualPublication number 22F-UM001
Install, Wire, Start-up, Program, and Troubleshoot PowerFlex 4M DrivesThis manual shows how to install, wire, start-up, program, and troubleshoot PowerFlex 4M Compact drives.
Associated Products• 22F PowerFlex 4M
PowerFlex 4M Quick StartPublication number 22F-QS001
Quick Start GuideThis guide summarizes the basic steps to install, start-up, and program PowerFlex 4M Compact drives.
Associated Products• 22F PowerFlex 4M
PowerFlex 40 User ManualPublication number 22B-UM001
Install, Wire, Start-up, Program, and Troubleshoot PowerFlex 40 DrivesThis manual shows how to install, wire, start-up, program, and troubleshoot PowerFlex 40 drives.
Associated Products• 22B PowerFlex 40
PowerFlex 40 Quick StartPublication number 22B-QS001
Quick Start GuideThis guide summarizes the basic steps to install, start-up, and program PowerFlex 40 drives.
Associated Products• 22B PowerFlex 40
PowerFlex 40P User ManualPublication number 22D-UM001
Install, Wire, Start-up, Program, and Troubleshoot PowerFlex 40P DrivesThis manual shows how to install, wire, start-up, program, and troubleshoot PowerFlex 40P Compact positioning drives.
Associated Products• 22D PowerFlex 40P
PowerFlex 40P Quick StartPublication number 22D-QS001
Quick Start GuideThis guide summarizes the basic steps to install, start-up, and program PowerFlex 40P Compact positioning drives.
Associated Products• 22D PowerFlex 40P
Publication IASIMP-RM001B-EN-E - September 2008
PowerFlex Resources 47
• For network connectivity, see EtherNet/IP Networks, ControlNet Networks, and DeviceNet Networks.
PowerFlex 400 User ManualPublication number 22C-UM001
Install, Wire, Start-up, Program, and Troubleshoot PowerFlex 400 DrivesThis manual shows how to install, wire, start-up, program, and troubleshoot PowerFlex 400 drives.
Associated Products• 22C PowerFlex 400
PowerFlex 400 Quick StartPublication number 22C-QS001
Quick Start GuideThis guide summarizes the basic steps to install, start-up, and program PowerFlex 400 drives.
Associated Products• 22C PowerFlex 400
PowerFlex 400 Wiring DiagramsPublication number 22C-WD001
Wiring DiagramsThis document provides wiring diagrams for PowerFlex 400 drives.
Associated Products• 22C PowerFlex 400
DriveGuard Safe-off for PowerFlex 40P and PowerFlex 70EC User ManualPublication number PFLEX-UM003
Install, Wire, and Operate DriveGuard OptionThis manual shows how to install, wire, and operate the DriveGuard safe-off option for PowerFlex 40P Compact positioning and PowerFlex 70EC enhanced control drives.
Associated Products• 22D PowerFlex 40P• 20A PowerFlex 70EC
AC Drives in Common Bus ConfigurationsPublication number DRIVES-AT002
Common Bus ConfigurationsThis manuals provides application techniques for PowerFlex drives in common bus configurations.
Associated Products• 22D PowerFlex 40P • 20B PowerFlex 700VC• 20C PowerFlex 700H• 20D PowerFlex 700S Phase 2
Resource Description
Publication IASIMP-RM001B-EN-E - September 2008
48 PowerFlex Resources
PowerFlex Architecture Class (7-Class) Drives
Resource Description
PowerFlex 70 Drive User ManualPublication number 20A-UM001
Install, Wire, Start-up, Program, and Troubleshoot PowerFlex 70EC DrivesThis manual shows how to install, wire, start-up, program, and troubleshoot PowerFlex 70EC enhanced control drives.
Associated Products• 20A PowerFlex 70/70EC
PowerFlex 70 Drive Quick StartPublication number 20A-QS001
Quick Start GuideThis guide summarizes the basic steps to install, start-up, and program PowerFlex 70EC enhanced control drives.
Associated Products• 20A PowerFlex 70/70EC
DriveGuard Safe-off for PowerFlex 40P and PowerFlex 70EC User ManualPublication number PFLEX-UM003
Install, Wire, and Operate DriveGuard OptionThis manual shows how to install, wire, and operate the DriveGuard safe-off option for PowerFlex 40P Compact positioning and PowerFlex 70EC enhanced control drives.
Associated Products• 22D PowerFlex 40P• 20A PowerFlex 70EC
PowerFlex 700VC User ManualPublication number 20B-UM001
Install, Wire, Start-up, Program, and Troubleshoot PowerFlex 700VC DrivesThis manual shows how to install, wire, start-up, program, and troubleshoot PowerFlex 700VC vector control drives.
Associated Products• 20B PowerFlex 700VC
PowerFlex 70EC and 700VC Reference ManualPublication number PFLEX-RM004
Specifications and Reference InformationThis manual provides detailed drive information for PowerFlex 70EC enhanced control and PowerFlex 700VC vector control drives.
Associated Products• 20A PowerFlex 70EC• 20B PowerFlex 700VC
PowerFlex 700 Quick StartPublication number 20B-QS001
Quick Start GuideThis guide summarizes the basic steps to install, start-up, and program PowerFlex 700VC vector control drives.
Associated Products• 20B series
PowerFlex 700H Programming ManualPublication number 20C-PM001
Program and Operate PowerFlex 700H DrivesThis manual shows how to start-up, program, and troubleshoot PowerFlex 700H high power drives.
Associated Products• 20C PowerFlex 700H
Publication IASIMP-RM001B-EN-E - September 2008
PowerFlex Resources 49
PowerFlex 700H Quick StartPublication number 20C-QS001
Quick Start GuideThis guide summarizes the basic steps to install, start-up, and program PowerFlex 700VC vector control drives.
Associated Products• 20C PowerFlex 700H
PowerFlex 700L Liquid Cooled User ManualPublication number 20L-UM001
Install, Wire, Start-up, Program, and Troubleshoot PowerFlex 700L DrivesThis manual shows how to install, wire, start-up, program, and troubleshoot PowerFlex 700L liquid cooled drives.
Associated Products• 20L PowerFlex 700L
PowerFlex 700L Liquid-to-Liquid User ManualPublication number 20L-UM002
Install, Wire, Start-up, Program, and Troubleshoot PowerFlex 700L DrivesThis manual shows how to install, wire, start-up, program, and troubleshoot PowerFlex 700L liquid-to-liquid drives.
Associated Products• 20L PowerFlex 700L
PowerFlex 700S Phase 2 User ManualPublication number 20D-UM006
Install, Wire, Start-up, Program, and Troubleshoot PowerFlex 700S Phase 2 DrivesThis manual shows how to install, wire, start-up, program, and troubleshoot PowerFlex 700S high performance drives.
Associated Products• 20D PowerFlex 700S Phase 2
PowerFlex 700S Phase 2 Reference ManualPublication number PFLEX-RM003
Specifications and Reference InformationThis manual provides detailed drive information for PowerFlex 700S high performance drives.
Associated Products• 20D PowerFlex 700S Phase 2
DriveLogix5730 Controller for PowerFlex 700S Drives with Phase 2 ControlPublication number 20D-UM003
Configure and Operate the 5730 DriveLogix SystemThis manual guides the development of projects for DriveLogix controllers. It provides procedures on how to establish communications:
• over ControlNet, DeviceNet, EtherNet/IP, and serial networks.• with PowerFlex 700S phase 2 drives, controllers, I/O, workstations, and PanelView
terminalsAssociated Products
• 20D PowerFlex 700S Phase 2
PowerFlex 700S Phase 2, Frames 1-6 Quick StartPublication number 20D-QS002
Quick Start GuideThis guide summarizes the basic steps to install, start-up, and program PowerFlex 700S high performance drives, frames 1-6.
Associated Products• 20D PowerFlex 700S Phase 2
PowerFlex 700S Phase 2, Frames 9-13 Quick StartPublication number 20D-QS004
Quick Start GuideThis guide summarizes the basic steps to install, start-up, and program PowerFlex 700S high performance drives, frames 9-13.
Associated Products• 20D PowerFlex 700S Phase 2
Resource Description
Publication IASIMP-RM001B-EN-E - September 2008
50 PowerFlex Resources
• For network connectivity, see EtherNet/IP Networks, ControlNet Networks, and DeviceNet Networks.
DriveGuard Safe-off for PowerFlex 700S Phase 2 and 700L User ManualPublication number 20D-UM007
Install, Wire, and Operate DriveGuard OptionThis manual shows how to install, wire, and operate the DriveGuard safe-off option for PowerFlex 700S high performance and PowerFlex 700L liquid cooled drives.
Associated Products• 20D PowerFlex 700S Phase 2• 20L PowerFlex 700L
PowerFlex 700 Active Converter Module User ManualPublication number PFLEX-UM002
Install, Wire, and Operate Active Converter ModuleThis manual shows how to install, wire, and operate the active converter module for PowerFlex 700 drives.
Associated Products• 20B PowerFlex 700VC• 20D PowerFlex 700S Phase 2• 20L PowerFlex 700L
PowerFlex 700 SCR Bus Supply User ManualPublication number 20S-UM001
Install, Wire, and Operate Bus SupplyThis manual shows how to install, wire, and operate the SCR bus supply for PowerFlex 700 drives.
Associated Products• 20B PowerFlex 700VC• 20D PowerFlex 700S Phase 2• 20L PowerFlex 700L
AC Drives in Common Bus ConfigurationsPublication number DRIVES-AT002
Common Bus ConfigurationsThis manuals provides application techniques for PowerFlex drives in common bus configurations.
Associated Products• 22D PowerFlex 40P • 20B PowerFlex 700VC• 20C PowerFlex 700H• 20D PowerFlex 700S Phase 2
Resource Description
Publication IASIMP-RM001B-EN-E - September 2008
Process Resources
Process
Level 0 Field Devices
• For distributed I/O products, see 1769 Compact I/O, 1794 FLEX I/O, and 1797 FLEX Ex I/O.
Resource Description
Integrated Architecture for Process Control System Recommendations Reference Manual Publication number PROCES-RM001
Architecture RecommendationsThis manual presents recommendations for the components and configurations for the typical process architectures: independent, centralized, and distributed.
Resource Description
ControlLogix HART Analog I/O Modules User ManualPublication number 1756-UM533
Install, Configure, and Operate 1756 HART ModulesThis manual describes how to install, configure, and operate ControlLogix HART analog I/O modules.
Associated Catalog Numbers• 1756-IF8H, 1756-OF8H
FLEX I/O HART Analog Modules User ManualPublication number 1794-UM063
Configure, Program, and Operate FLEX I/O HART Analog ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot FLEX I/O HART analog modules.
Associated Catalog Numbers• 1794-IE8H, 1794-OE8H
FLEX Ex I/O HART Analog Modules User ManualPublication number 1797-6.5.3
Configure, Program, and Operate FLEX Ex I/O HART Analog ModulesThis manual describes the necessary tasks to configure, operate, and troubleshoot FLEX Ex I/O HART analog modules.
Associated Catalog Numbers• 1797-IE8H, 1797-OE8H
FOUNDATION Fieldbus Linking Device User ManualPublication number 1757-UM010
Install, Configure, and Operate a FOUNDATION Fieldbus Linking DeviceThis manual describes how to install, configure, and operate the 1757-FFLD linking device.
Associated Catalog Numbers• 1757-FFLD
RSFieldbus Software User ManualPublication number RSFBUS-UM001
Install and Use RSFieldbus SoftwareThis manual describes how to install and use RSFieldbus software to configure a 1757-FFLD linking device. This manual also defines the available FOUNDATION Fieldbus function blocks for use with the 1757-FFLD linking device.
Associated Catalog Numbers• 9324-RSFBC
51 Publication IASIMP-RM001B-EN-E - September 2008
52 Process Resources
Level 1 Process Control
• For controller products, see All Logix5000 Controllers, All Logix5000 Programming Languages, and 1756 ControlLogix Controllers.
Level 2 Supervisory Control
• For operator interface products, see PanelView Plus and PanelView Plus CE Terminals and FactoryTalk View Software.
See online help for details regarding specific software products.
Resource Description
Using ControlLogix in SIL2 Applications Reference ManualPublication number 1756-RM001
ControlLogix Components in SIL2 ApplicationsThis manual describes the ControlLogix system components that are suitable for use in SIL2 applications.
Associated Products• 1756 ControlLogix
FLEX I/O System with ControlLogix in SIL2 Applications Reference ManualPublication number 1794-RM001
FLEX I/O with ControlLogix Systems in SIL2 ApplicationsThis manual describes the FLEX I/O components that are suitable for use with ControlLogix systems in SIL2 applications.
Associated Products• 1756 ControlLogix• 1794 FLEX
Runtime/Online Addition of ControlLogix I/O Over ControlNet or EtherNet/IP Networks White PaperPublication number LOGIX-WP006
Considerations for Adding I/O at RuntimeThis white paper describes the considerations of adding ControlLogix I/O at runtime.
Associated Products• 1756 ControlLogix
Using the PIDE Instruction White PaperPublication number LOGIX-WP008
Considerations for Using the PIDE InstructionThis white paper describes how to use the PIDE instruction to perform process loop control algorithms such as:
• adaptive gains• cascade control• ratio control• multiloop selection• split-range time-proportioning
Associated Products• 1756 ControlLogix
Getting Results with the PIDE Autotuner GuidePublication number PIDE-GR001
Install and Use PIDE Autotuner SoftwareThis getting results guide provides you with information on how to install and navigate the PIDE Autotuner software.
Associated Products• 9324-RLD series
Publication IASIMP-RM001B-EN-E - September 2008
53
Notes:
Publication IASIMP-RM001B-EN-E - September 2008
54
Notes:
Publication IASIMP-RM001B-EN-E - September 2008
55
Notes:
Publication IASIMP-RM001B-EN-E - September 2008
Publication IASIMP-RM001B-EN-E - September 2008 57Supercedes IASIMP-RM001A-EN-E - September 2007 Copyright © 2008 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Rockwell Automation Support
Rockwell Automation provides technical information on the Web to assist you in using its products. At http://support.rockwellautomation.com, you can find technical manuals, a knowledge base of FAQs, technical and application notes, sample code and links to software service packs, and a MySupport feature that you can customize to make the best use of these tools.
For an additional level of technical phone support for installation, configuration, and troubleshooting, we offer TechConnect Support programs. For more information, contact your local distributor or Rockwell Automation representative, or visit http://support.rockwellautomation.com.
Installation Assistance
If you experience a problem with a hardware module within the first 24 hours of installation, please review the information that's contained in this manual. You can also contact a special Customer Support number for initial help in getting your module up and running.
New Product Satisfaction Return
Rockwell tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning, it may need to be returned.
United States 1.440.646.3223Monday – Friday, 8am – 5pm EST
Outside United States
Please contact your local Rockwell Automation representative for any technical support issues.
United States Contact your distributor. You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process.
Outside United States
Please contact your local Rockwell Automation representative for return procedure.