Capitalware's MQ Technical Conference v2.0.1.4
IBM MQ Disaster Recovery
Mark Taylor
IBM Hursley
Capitalware's MQ Technical Conference v2.0.1.4
Please Note
IBM’s statements regarding its plans, directions, and intent are subject to change
or withdrawal without notice at IBM’s sole discretion.
Information regarding potential future products is intended to outline our general
product direction and it should not be relied on in making a purchasing decision.
The information mentioned regarding potential future products is not a
commitment, promise, or legal obligation to deliver any material, code or
functionality. Information about potential future products may not be incorporated
into any contract. The development, release, and timing of any future features or
functionality described for our products remains at our sole discretion.
Performance is based on measurements and projections using standard IBM
benchmarks in a controlled environment. The actual throughput or performance
that any user will experience will vary depending upon many factors, including
considerations such as the amount of multiprogramming in the user’s job stream,
the I/O configuration, the storage configuration, and the workload processed.
Therefore, no assurance can be given that an individual user will achieve results
similar to those stated here.
Capitalware's MQ Technical Conference v2.0.1.4
Introduction
• Availability is a very large subject
• You can have the best technology in the world, but you have to manage it
correctly
• Technology is not a substitute for good planning and testing!
Capitalware's MQ Technical Conference v2.0.1.4
What is DR – Wikipedia Version
• Disaster recovery is the process, policies and procedures related to
preparing for recovery or continuation of technology infrastructure critical to
an organization after a natural or human-induced disaster. Disaster
recovery is a subset of business continuity. While business continuity
involves planning for keeping all aspects of a business functioning in the
midst of disruptive events, disaster recovery focuses on the IT or
technology systems that support business functions.
Capitalware's MQ Technical Conference v2.0.1.4
What is DR
• Getting applications running after a major (often whole-site) failure or loss
• It is not about High Availability although often the two are related and share
design and implementation choices ‒ “HA is having 2, DR is having them a long way apart”
‒ More seriously, HA is about keeping things running, while DR is about recovering
when HA has failed.
• Requirements driven by business, and often by regulators ‒ Data integrity, timescales, geography …
• One major decision point: cost ‒ How much does DR cost you, even if it’s never used?
‒ How much are you prepared to lose
Capitalware's MQ Technical Conference v2.0.1.4
Disaster Recovery vs High Availability
• Designs for HA typically involve a single site for each component of the
overall architecture
• Designs for DR typically involve separate sites
• Designs for HA (and CA) typically require no data loss
• Designs for DR typically can have limited data loss
• Designs for HA typically involve high-speed takeover
• Designs for DR typically can permit several hours down-time
Capitalware's MQ Technical Conference v2.0.1.4
What makes a Queue Manager on Dist?
ini files
Registry
System
ini files
Registry
QMgr
Recovery Logs
QFiles
/var/mqm/log/QMGR
/var/mqm/qmgrs/QMGR
Obj Definiitions Security Cluster
etc
SSL Store
Capitalware's MQ Technical Conference v2.0.1.4
Backups
• At minimum, backup definitions at regular intervals ‒ Include ini files and security settings
• One view is there is no point to backing up messages ‒ They will be obsolete if they ever need to be restored
‒ Distributed platforms – data backup only possible when qmgr stopped
• Use rcdmqimg on Distributed platforms to take images ‒ Channel sync information is recovered even for circular logs
• Backup everything before upgrading code levels ‒ On Distributed, you cannot go back
• Exclude queue manager data from normal system backups ‒ Some backup products interfere with MQ processing
Capitalware's MQ Technical Conference v2.0.1.4
What makes a Queue Manager on z/OS?
ACTIVE LOGS ARCHIVED LOGS LOG
BSDS
VSAM
DS
HIGHEST RBA
CHKPT LIST
LOG INVENTORY
VSAM Linear
DS
Tapes
VSAM
DS
Pagesets Private Objects
Private Messages RECOV RBAs
CP CP CP
CF
Shared Messages Shared Objects
Group Objects
DB2
... ...
Capitalware's MQ Technical Conference v2.0.1.4
What makes up a Queue Manager?
• Queue manager started task procedure ‒ Specifies MQ libraries to use, location of BSDS and pagesets and INP1, INP2 members
start up processing
• System Parameter Module – zParm ‒ Configuration settings for logging, trace and connection environments for MQ
• BSDS: Vital for Queue Manager start up ‒ Contains info about log RBAs, checkpoint information and log dataset names
• Active and Archive Logs: Vital for Queue Manager start up ‒ Contain records of all recoverable activity performed by the Queue Manager
• Pagesets ‒ Updates made “lazily” and brought “up to date” from logs during restart
‒ Start up with an old pageset (restored backup) is not really any different from start up after
queue manager failure
‒ Backup needs to copy page 0 of pageset first (don’t do volume backup!)
• DB2 Configuration information & Group Object Definitions
• Coupling Facility Structures ‒ Hold QSG control information and MQ messages
Capitalware's MQ Technical Conference v2.0.1.4
Backing Up a z/OS Queue Manager
• Keep copies of ZPARM, MSTR procedure, product datasets and
INP1/INP2 members
• Use dual BSDS, dual active and dual archive logs
• Take backups of your pagesets ‒ This can be done while the queue manager is running (fuzzy backups)
‒ Make sure you backup Page 0 first, REPRO or ADRDSSU logical copy
• DB2 data should be backed up as part of the DB2 backup procedures
• CF application structures should be backed up on a regular basis ‒ These are made in the logs of the queue manager where the backup was issued
Capitalware's MQ Technical Conference v2.0.1.4
Rebuilding a Queue Manager
• Make sure you have a backup of the definitions ‒ Either through a tool such as Omegamon Configuration Manager
‒ Or by manually creating the backup – MAKEDEF, dmpmqcfg or MS03
• Make sure you know which version of MQ is installed ‒ And you have the install images for the code
• Make sure you’ve got the security configuration ‒ Windows SIDs?
• Also any customisation in the qm.ini file (or registry)
• And sometimes exits might have external configuration ‒ Don’t forget to have the binaries available - often separately installed
Capitalware's MQ Technical Conference v2.0.1.4
Rebuilding a Queue Manager
• A rebuild creates a replacement queue manager ‒ Same object definitions
‒ But loss of message data and channel sequence numbers
• Replacement queue manager has a new QMID ‒ MQ Explorer saves QMID in its list of known queue managers
‒ Will allow you to connect, but requires confirmation that the new qmid is expected
• Recommend issuing RESET CLUSTER at full repository to remove the old
QMID before bringing the replacement online
Capitalware's MQ Technical Conference v2.0.1.4
Topologies
• Sometimes a data centre is kept PURELY as the DR site
• Sometimes 2 data centres are in daily use; back each other up for disasters ‒ Normal workload distributed to the 2 sites
‒ These sites are probably geographically distant
• Another variation has 2 data centres “near” each other ‒ Often synchronous replication
‒ With a 3rd site providing a long-distance backup
‒ "Tornados never hit two sites 10 miles apart so we only use nearby backup site"
• And of course further variations and combinations of these
Capitalware's MQ Technical Conference v2.0.1.4
Queue Manager Connections
• DR topologies have little difference for individual queue managers
• But they do affect overall design ‒ Where do applications connect to
‒ How are messages routed
• Clients need ClntConn definitions that reach any machine
• Will be affected by how you manage network ‒ Do DNS names move with the site?
‒ Do IP addresses move with the site?
• Some sites always put IP addresses in CONNAME; others use hostname ‒ No rule on which is better
Capitalware's MQ Technical Conference v2.0.1.4
Disk replication
• Disk replication can be used for MQ disaster recovery
• Either synchronous or asynchronous disk replication is OK ‒ Synchronous:
No data loss if disaster occurs
Performance is impacted by replication delay
Limited by distance (eg 100km)
‒ Asynchronous:
Some limited data loss if disaster occurs
It is critical that queue manager data and logs are replicated in the same consistency
group if replicating both
• Disk replication cannot be used between the active and standby instances
of a multi-instance queue manager ‒ Could be used to replicate to a DR site in addition though
Capitalware's MQ Technical Conference v2.0.1.4
Combining HA and DR
QM1
Machine A
Active instance
Machine B
Standby instance
shared storage
Machine C
Backup instance
QM1 Replication
Primary Site Backup Site
HA Pair
Capitalware's MQ Technical Conference v2.0.1.4
Combining HA and DR – “Active/Active”
QM1
Machine A Active
instance
Machine B Standby instance
Machine C Backup instance QM1
Replication
Site 1 Site 2
HA Pair
Machine C Active
instance
Machine D Standby instance
Machine A Backup instance
QM2 QM2 Replication
HA Pair
Capitalware's MQ Technical Conference v2.0.1.4
More about disk replication
• During failover, need to stop disk replication and make backup disks live ‒ This is probably the most time-consuming piece
‒ Both for HA and DR, managing disks is critical path
‒ Will probably be replicating data for all resource managers, not just MQ
• Configuration variation: ‒ A local disk-only synchronous replica
‒ A remote full datacentre using async replication chained from primary
‒ If primary fails, the local replica can still bring the backup site up-to-date
QM1 QM1 QM1
Primary datacentre
Disk-only site
Backup datacentre
Sync Async
Capitalware's MQ Technical Conference v2.0.1.4
Backup Queue Manager - Objective
• Feature introduced in MQ V6
• Prepares a queue manager for restart/recovery ‒ Without needing to replay all logs at a critical time
‒ For Windows, Unix and System i
• “Backup” queue manager takes the place of original ‒ New QMID but contains original definitions and messages
Capitalware's MQ Technical Conference v2.0.1.4
Backup Queue Manager - Procedure
• Configure queue manager with linear logging
• Create a queue manager at the primary site ‒ Create an identical one at the DR site – the backup queue manager
• Ship full, inactive log files from active QM to the DR site ‒ Can use disk replication to do this, but disks have to be mounted
No need to replicate qfiles
‒ Or modify SupportPac or sample programs for log management to copy files at
the same time as deleting/archiving local logs
• Replay log files on the backup QM to bring it up to date ‒ Do this at regular intervals
‒ strmqm -r
• If disaster occurs, activate the backup queue manager ‒ strmqm -a
• For more control, can force filling of current log file ‒ MQSC RESET QMGR TYPE(ADVANCELOG)
Capitalware's MQ Technical Conference v2.0.1.4
A non-DR DR configuration
• Based on a real customer scenario: different qmgrs in different sites
• Regular deliberate partial failovers of apps and/or qmgrs
• Recommended MQ clusters: "marooned" messages allowed for this design
QM1 Sender App
Receiver App
QM2
Receiver App
QM3
Sender App
Site 1 Site 2
Site 3
App moves site
Capitalware's MQ Technical Conference v2.0.1.4
Integration with other products
• May want to have consistency with other data resources ‒ For example, databases and app servers
• Only way for guaranteed consistency is disk replication where all logs are
in same group ‒ Otherwise transactional state might be out of sync
• DB2 can use MQ as part of its own replication strategy ‒ InfoSphere Replication Server
Capitalware's MQ Technical Conference v2.0.1.4
Planning for Recovery
• Write a DR plan ‒ Document everything – to tedious levels of detail
‒ Include actual commands, not just a description of the operation
Not “Stop MQ”, but “as mqm, run /usr/local/bin/stopmq.sh US.PROD.01”
• And test it frequently ‒ Recommend twice a year
‒ Record time taken for each task
• Remember that the person executing the plan in a real emergency might
be under-skilled and over-pressured ‒ Plan for no access to phones, email, online docs …
• Each test is likely to show something you’ve forgotten ‒ Update the plan to match
‒ You’re likely to have new applications, hardware, software …
• May have different plans for different disaster scenarios
Capitalware's MQ Technical Conference v2.0.1.4
Example Exercises from MQ Development
• Different groups have different activities that must continue ‒ Realistic scenarios can help show what might not be available
• From the MQ development lab …
• Most of the change team were told there was a virulent disease and they
had to work from home ‒ Could they continue to support customers
• If Hursley machine room was taken out by a plane missing its landing at
Southampton airport ‒ Could we carry on developing the MQ product
‒ Source code libraries, build machines, test machines …
‒ Could fixes be produced
• (A common one) Someone hit emergency power-off button
• Not just paper exercises
Capitalware's MQ Technical Conference v2.0.1.4
Networking Considerations
• DNS - You will probably redirect hostnames to a new site ‒ But keep the same IP addresses? Consider NAT for routing to external partners?
‒ Affects CONNAME
• Include external organisations in your testing ‒ 3rd parties may have firewalls that do not recognize your DR servers
• LOCLADDR configuration ‒ Not normally used by MQ, but firewalls, IPT and channel exits may inspect it
‒ May need modification if a machine changes address
• Clustering needs special consideration ‒ Easy to accidentally join the real cluster and start stealing messages
‒ Ideally keep network separated, but can help by:
Not giving backup ‘live’ security certs
Not starting chinit address space (z/OS)
Not allowing channel initiators to start (distributed)
Use CHLAUTH rules
• Backup will be out of sync with the cluster ‒ REFRESH CLUSTER() resolves updates
Capitalware's MQ Technical Conference v2.0.1.4
A Real MQ Network Story
• Customer did an IP move during a DR test
• Forgot to do the IP move back when they returned to prime systems
• Didn’t have monitoring in place that picked this up until users complained
about lack of response
Capitalware's MQ Technical Conference v2.0.1.4
Application Patterns for availability
• Article describing examples of how to build a hub topology supporting: ‒ Continuous availability to send MQ messages, with no single point of failure
‒ Linear horizontal scale of throughput, for both MQ and the attaching applications
‒ Exactly once delivery, with high availability of individual persistent messages
‒ Three messaging styles: Request/response, fire-and-forget, and pub/sub
• http://www.ibm.com/developerworks/websphere/library/techarticles/1303_b
roadhurst/1303_broadhurst.html
Capitalware's MQ Technical Conference v2.0.1.4
Other Resources
• Applications may need to deal with replay or loss of data. ‒ Decide whether to clear queues down to a known state, or enough information
elsewhere to manage replays
• Order of recovery may change with different product releases ‒ Every time you install a new version of a product revisit your DR plan
• What do you really need to recover ‒ DR site might be lower-power than primary site
‒ Some apps might not be critical to the business
‒ But some might be unrecognised prereqs
Capitalware's MQ Technical Conference v2.0.1.4
If a Real Disaster Hits
• Hopefully you never need it. But if the worst happens:
• Follow your tested plan ‒ Don’t try shortcuts
• But also, if possible: ‒ Get someone to take notes and keep track of the time tasks took
‒ Prepare to attend post mortem meetings on steps you took to recover
‒ Accept all offers of assistance
• And afterwards: ‒ Update your plan for the next time
Capitalware's MQ Technical Conference v2.0.1.4
Summary
• Various ways of recovering queue managers
• Plan what you need to recover for MQ
• Plan the relationship with other resources
• Test your plan
Capitalware's MQ Technical Conference v2.0.1.4
Legal Disclaimer
• © IBM Corporation 2013. All Rights Reserved.
• The information contained in this publication is provided for informational purposes only. While efforts were made to verify the completeness and accuracy of the information contained
in this publication, it is provided AS IS without warranty of any kind, express or implied. In addition, this information is based on IBM’s current product plans and strategy, which are
subject to change by IBM without notice. IBM shall not be responsible for any damages arising out of the use of, or otherwise related to, this publication or any other materials. Nothing
contained in this publication is intended to, nor shall have the effect of, creating any warranties or representations from IBM or its suppliers or licensors, or altering the terms and
conditions of the applicable license agreement governing the use of IBM software.
• References in this presentation to IBM products, programs, or services do not imply that they will be available in all countries in which IBM operates. Product release dates and/or
capabilities referenced in this presentation may change at any time at IBM’s sole discretion based on market opportunities or other factors, and are not intended to be a commitment to
future product or feature availability in any way. Nothing contained in these materials is intended to, nor shall have the effect of, stating or implying that any activities undertaken by
you will result in any specific sales, revenue growth or other results.
• If the text contains performance statistics or references to benchmarks, insert the following language; otherwise delete:
Performance is based on measurements and projections using standard IBM benchmarks in a controlled environment. The actual throughput or performance that any user will
experience will vary depending upon many factors, including considerations such as the amount of multiprogramming in the user's job stream, the I/O configuration, the storage
configuration, and the workload processed. Therefore, no assurance can be given that an individual user will achieve results similar to those stated here.
• If the text includes any customer examples, please confirm we have prior written approval from such customer and insert the following language; otherwise delete:
All customer examples described are presented as illustrations of how those customers have used IBM products and the results they may have achieved. Actual environmental costs
and performance characteristics may vary by customer.
• Please review text for proper trademark attribution of IBM products. At first use, each product name must be the full name and include appropriate trademark symbols (e.g., IBM
Lotus® Sametime® Unyte™). Subsequent references can drop “IBM” but should include the proper branding (e.g., Lotus Sametime Gateway, or WebSphere Application Server).
Please refer to http://www.ibm.com/legal/copytrade.shtml for guidance on which trademarks require the ® or ™ symbol. Do not use abbreviations for IBM product names in your
presentation. All product names must be used as adjectives rather than nouns. Please list all of the trademarks that you use in your presentation as follows; delete any not included in
your presentation. IBM, the IBM logo, Lotus, Lotus Notes, Notes, Domino, Quickr, Sametime, WebSphere, UC2, PartnerWorld and Lotusphere are trademarks of International
Business Machines Corporation in the United States, other countries, or both. Unyte is a trademark of WebDialogs, Inc., in the United States, other countries, or both.
• If you reference Adobe® in the text, please mark the first use and include the following; otherwise delete:
Adobe, the Adobe logo, PostScript, and the PostScript logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States, and/or other countries.
• If you reference Java™ in the text, please mark the first use and include the following; otherwise delete:
Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the United States, other countries, or both.
• If you reference Microsoft® and/or Windows® in the text, please mark the first use and include the following, as applicable; otherwise delete:
Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both.
• If you reference Intel® and/or any of the following Intel products in the text, please mark the first use and include those that you use as follows; otherwise delete:
Intel, Intel Centrino, Celeron, Intel Xeon, Intel SpeedStep, Itanium, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and
other countries.
• If you reference UNIX® in the text, please mark the first use and include the following; otherwise delete:
UNIX is a registered trademark of The Open Group in the United States and other countries.
• If you reference Linux® in your presentation, please mark the first use and include the following; otherwise delete:
Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. Other company, product, or service names may be trademarks or service marks of
others.
• If the text/graphics include screenshots, no actual IBM employee names may be used (even your own), if your screenshots include fictitious company names (e.g., Renovations, Zeta
Bank, Acme) please update and insert the following; otherwise delete: All references to [insert fictitious company name] refer to a fictitious company and are used for illustration
purposes only.