Date post: | 07-Aug-2018 |
Category: |
Documents |
Upload: | rajesh-kumar-sugumaran |
View: | 214 times |
Download: | 0 times |
of 50
8/20/2019 IBP Part 06 Sales v02
1/121
Integrated Business Processes with SAP ERP
Script 6: Sales Order Management in SAP ERP
Tutor: Dipl.-Wirt.-Inf. Taymaz Khatami
8/20/2019 IBP Part 06 Sales v02
2/121
Integrated Processes with SAP ERP – Sales Order Management
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 2
Copyright
- This document is in parts based on publications for the TERP10 course “mySAP ERP
– integrated business processes“– those parts are subject to the copyright of SAP AG.- All figures used within this course are created in the style of the TERP10 if not labeled
elsewise. Those parts are subject to the copyright of SAP AG.
- All screenshots used within this document, even if displayed in extracts, are subject to
the copyright of SAP AG.
- Distr ibution and reproduction of thi s document or parts of thi s document in any
form is prohibited without the wri tten permi ssion of Prof. Dr. Heimo H . Adels-
berger, Dipl .-Wir t.-Inf . Pouyan Khatami and Dipl.-Wir t.-In f. Taymaz Khatami .
8/20/2019 IBP Part 06 Sales v02
3/121
Integrated Processes with SAP ERP – Sales Order Management
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 3
Table of Contents
1 SALES ORDER MANAGEMENT IN SAP ERP.......................................................... 8
2 ORGANIZATIONAL LEVELS AND MASTER DATA OF SAP ERP SALES ..... 10
2.1
THEORY: ORGANIZATIONAL LEVELS IN SALES ORDER MANAGEMENT ..................... 10
2.1.1
Organizational Levels in Sales Order Management: Overview .......................... 10
2.1.2 Company Code ..................................................................................................... 11
2.1.3
Sales Organization ............................................................................................... 11
2.1.4 Distribution Channel ............................................................................................ 12
2.1.5
Division ................................................................................................................ 13
2.1.6 Sales Area ............................................................................................................. 13
2.1.7 Plant and Storage Location .................................................................................. 14
2.1.8
Shipping Point ...................................................................................................... 15
2.2 THEORY: MASTER DATA IN SALES ORDER MANAGEMENT ....................................... 16
2.2.1
Customer Master .................................................................................................. 16
2.2.2
Material Master .................................................................................................... 18
2.2.3
Customer-Material Information Record .............................................................. 19
2.2.4 Output ................................................................................................................... 19
2.2.5
Condition Master .................................................................................................. 20
2.3 PRACTICE: MAINTAIN MASTER DATA IN SAP ERP SALES ........................................ 22
2.3.1
Create Customer Master ...................................................................................... 23
2.3.2
Create Conditions ................................................................................................ 28
2.4 ELUCIDATION ............................................................................................................ 32
2.4.1
Organizational Levels in Sales Order Management ............................................ 32
2.4.2 Master Data in Sales Order Management ........................................................... 34
3
ORDER TO CASH BUSINESS PROCESS ................................................................. 37
3.1 THEORY: ORDER TO CASH BUSINESS PROCESS ......................................................... 37
3.1.1
Order-to-Cash Business Process ......................................................................... 37
3.1.2 Documents in Sales and Distribution ................................................................... 38
3.1.3
Pre-Sales Activities .............................................................................................. 40
3.1.4 Sales Order Processing ........................................................................................ 41
3.1.5 Procurement and Inventory Sourcing .................................................................. 46
3.1.6
Shipping ................................................................................................................ 47
3.1.7 Billing ................................................................................................................... 52
3.1.8
Payment ................................................................................................................ 55
3.1.9
Integration of the SAP Sales Process ................................................................... 56
3.2
PRACTICE: ACCOMPLISH SALES ORDER PROCESS ..................................................... 58
3.2.1
Create a Sales Order ............................................................................................ 58
3.2.2 MRP for the Speedstarlett .................................................................................... 61 3.2.3
Producing the Speedstarletts ................................................................................ 64
3.2.4 Shipping Processing ............................................................................................. 75
3.2.5
Billing ................................................................................................................... 79
3.2.6 Enter Incoming Payment ...................................................................................... 81
3.3
ELUCIDATION ............................................................................................................ 83
3.3.1 Order-to-Cash Business Process ......................................................................... 83
3.3.2 Documents in Sales and Distribution ................................................................... 84
3.3.3
Pre-Sales Activities .............................................................................................. 86 3.3.4 Sales Order Processing ........................................................................................ 86
3.3.5
Procurement and Inventory Sourcing .................................................................. 88
8/20/2019 IBP Part 06 Sales v02
4/121
Integrated Processes with SAP ERP – Sales Order Management
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 4
3.3.6 Shipping ................................................................................................................ 89
3.3.7
Billing ................................................................................................................... 91
3.3.8 Payment ................................................................................................................ 93
3.3.9
Integration of the SAP Sales Process ................................................................... 93
4 REPORTING IN SAP ERP SALES AND DISTRIBUTION ................................... 100
4.1
THEORY: R EPORTING AND A NALYSIS TOOLS IN SAP ERP SD ................................ 100
4.1.1 Sources of Sales Order Information ................................................................... 100
4.1.2
Lists and Reports ................................................................................................ 101
4.1.3 Information Structures in Sales Order Management ......................................... 104
4.1.4
Standard Analyses .............................................................................................. 105
4.2 PRACTICE: R EPORTING AND A NALYSES TOOLS IN SAP ERP SD............................. 107
4.2.1 Display Sales Orders .......................................................................................... 107
4.2.2
Carry out Standard Analyses ............................................................................. 108
4.3 ELUCIDATION .......................................................................................................... 110
4.3.1
Sources of Sales Order Information ................................................................... 110
4.3.2
Lists and Reports ................................................................................................ 110
4.3.3
Information Structures in Sales Order Management ......................................... 112
4.3.4
Standard Analyses .............................................................................................. 112
5 DATA SHEET .............................................................................................................. 114
6 REFLEXION ................................................................................................................ 115
6.1
QUESTIONS .............................................................................................................. 115
6.2 STANDARD SOLUTION ............................................................................................. 118
8/20/2019 IBP Part 06 Sales v02
5/121
Integrated Processes with SAP ERP – Sales Order Management
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 5
Table of Figures
Figure 1: Process Overview: Sales Order Management ............................................................. 9
Figure 2: Organizational Levels of Sales Order Management ................................................. 10
Figure 3: Company Code ......................................................................................................... 11
Figure 4: Sale Organization ...................................................................................................... 12
Figure 5: Distribution Channel ................................................................................................. 12
Figure 6: Division ..................................................................................................................... 13
Figure 7: Sales Area ................................................................................................................. 14
Figure 8: Plant and Storage Location ....................................................................................... 15
Figure 9: Shipping Point .......................................................................................................... 15
Figure 10: Master Data ............................................................................................................. 16
Figure 11: Customer Master Data ............................................................................................ 17
Figure 12: Partner Functions for the Customer Master ............................................................ 18
Figure 13: Material Master ....................................................................................................... 18
Figure 14: Customer-Material Information Record ................................................................. 19
Figure 15: Output ..................................................................................................................... 20
Figure 16: Condition Master .................................................................................................... 21
Figure 17: Process Overview: Customer Master Data ............................................................. 22
Figure 18: Create Customer: SAP-System-Screenshot ............................................................ 23
Figure 19: Create Customer - General Data: SAP-System-Screenshot ................................... 24
Figure 20: Create Customer - Reconciliation Account: SAP-System-Screenshot ................... 25
Figure 21: Extend Customer Master Data - New Sales Area SAP-System-Screenshot .......... 27
Figure 22: Process overview: Condition records ..................................................................... 28
Figure 23: Create Material-specific Condition Record: SAP-System-Screenshot ................... 29
Figure 24: Create Customer-individual Condition Record: SAP-System-Screenshot ............. 30
Figure 25: Maintain Scales: SAP-System-Screenshot ............................................................. 30
Figure 26: Order-to-Cash Business Process ............................................................................. 37
Figure 27: Documents in Sales and Distribution ..................................................................... 38
Figure 28: Pre-Sales Activities ................................................................................................. 41
Figure 29: Sales Order .............................................................................................................. 42
Figure 30: Sales Order Creation ............................................................................................... 42
Figure 31: Roles of the Sales Document .................................................................................. 43
Figure 32: Sales Document Structure ....................................................................................... 44
Figure 33: Backward Scheduling ............................................................................................. 45
Figure 34: Incompletion Log .................................................................................................... 45
Figure 35: Transfer of Requirements ....................................................................................... 46
Figure 36: Availability Checks in a Sales Order ...................................................................... 47
Figure 37: Shipping .................................................................................................................. 48
Figure 38: Creating an Outbound Delivery .............................................................................. 48
Figure 39: Structure of a Delivery Document .......................................................................... 49
Figure 40: Roles of Outbound Delivery ................................................................................... 49
Figure 41: Picking .................................................................................................................... 50
Figure 42: Picking in the Shipping Process ............................................................................. 51
Figure 43: Packing ................................................................................................................... 51
Figure 44: Posting a Goods Issue ............................................................................................. 52
Figure 45: Billing ..................................................................................................................... 53
Figure 46: Creating a Billing Document .................................................................................. 53
Figure 47: Structure of a Billing Document ............................................................................. 54 Figure 48: Effects of a Billing Document ................................................................................ 55
Figure 49: Payment .................................................................................................................. 55
8/20/2019 IBP Part 06 Sales v02
6/121
Integrated Processes with SAP ERP – Sales Order Management
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 6
Figure 50: Document Flow in the SAP System ....................................................................... 56
Figure 51: Sales and Distribution: Integration ......................................................................... 57
Figure 52: Process Overview: Sales Order Management ......................................................... 58
Figure 53: Create Sales Order - Select Sales Area: SAP-System-Screenshot ......................... 59
Figure 54: Master Data Interaction: SAP-System-Screenshot ................................................. 59
Figure 55: Create sales order: item data screen 1: SAP-System-Screenshot ........................... 60 Figure 56: Process Overview: MRP ......................................................................................... 61
Figure 57: Sales Order in Stock/Requirements List: SAP-System-Screenshot ....................... 61
Figure 58: No Dependent Requirement (1): SAP-System-Screenshot .................................... 62
Figure 59: No Dependent Requirement (2): SAP-System-Screenshot .................................... 62
Figure 60: Planned Orders in Stock/Requirements List: SAP-System-Screenshot ................. 63
Figure 61: Process Overview: Manufacturing Execution ........................................................ 64
Figure 62: MRP Basis-Module2: SAP-System-Screenshot ..................................................... 64
Figure 63: Missing Part Overview for Basis-Module2: SAP-System-Screenshot ................... 65
Figure 64: Production Order for Basis-Module2: SAP-System-Screenshot ............................ 66
Figure 65: Planned Order for the Speedstarlett: SAP-System-Screenshot .............................. 66
Figure 66: Production Order for the Speedstarlett: SAP-System-Screenshot .......................... 67
Figure 67: Create Condition Record for Alu-Frame: SAP-System-Screenshot ....................... 68
Figure 68: Create Purchase Requisitions: SAP-System-Screenshot ........................................ 69
Figure 69: Create Purchase order (1): SAP-System-Screenshot .............................................. 69
Figure 70: Create Purchase Order (2): SAP-System-Screenshot ............................................. 70
Figure 71: Create Purchase Order (3): SAP-System-Screenshot ............................................. 70
Figure 72: Available Quantity of Alu-Frame: SAP-System-Screenshot ................................. 71
Figure 73: Goods Issue for Basis-Module2 Production Order: SAP-System-Screenshot ....... 72
Figure 74: Produced Basis-Module2: SAP-System-Screenshot .............................................. 73
Figure 75: Produced Speedstarlett: SAP-System-Screenshot .................................................. 74
Figure 76: Process Overview: Shipping Process ...................................................................... 75
Figure 77: Error Message: SAP-System-Screenshot ............................................................... 75
Figure 78: Schedule Line: SAP-System-Screenshot ................................................................ 76
Figure 79: Create Delivery Document: SAP-System-Screenshot ............................................ 76
Figure 80: Post goods Issue: SAP-System-Screenshot ............................................................ 78
Figure 81: Document Flow Sales Order Process - Delivery: SAP-System-Screenshot ........... 78
Figure 82: Process overview: Billing ....................................................................................... 79
Figure 83: Document Flow Sales Order Process - Billing: SAP-System-Screenshot .............. 80
Figure 84: Process Overview: Incoming Payment ................................................................... 81 Figure 85: Enter Incoming Payment of the Customer: SAP-System-Screenshot .................... 81
Figure 86: Document Flow Sales Order Process - Payment: SAP-System-Screenshot ........... 82
Figure 87: Accounts Receivable and Reconciliation Account: SAP-System-Screenshot ....... 85
Figure 88: Production Order Confirmation (1): SAP-System-Screenshot ............................... 95
Figure 89: Production Order Confirmation (2) ........................................................................ 95
Figure 90: Outbound Delivery/Goods Issue (1): SAP-System-Screenshot ............................. 96
Figure 91: Outbound Delivery/Goods Issue (2) ....................................................................... 97
Figure 92: Billing (1): SAP-System-Screenshot ...................................................................... 97
Figure 93: Billing (2): SAP-System-Screenshot ...................................................................... 98
Figure 94: Payment (1): SAP-System-Screenshot ................................................................... 98
Figure 95: Payment (2) ............................................................................................................. 99
Figure 96: Reposts and Analyses for Processes in Sales Order Management ....................... 100
Figure 97: Sources of Sales Order Information ..................................................................... 101
Figure 98: Lists and Reports .................................................................................................. 102 Figure 99: Example: Sales Order List .................................................................................... 102
Figure 100: Example: Documents with a Specific Status ...................................................... 103
8/20/2019 IBP Part 06 Sales v02
7/121
Integrated Processes with SAP ERP – Sales Order Management
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 7
Figure 101: Worklists ............................................................................................................. 104
Figure 102: Information Structures in Sales Order Management .......................................... 105
Figure 103: Standard Analyses .............................................................................................. 106
Figure 104: Process Overview: Reporting and Analyses Tools ............................................. 107
Figure 105: Sales Orders List: SAP-System-Screenshot ....................................................... 107
Figure 106: Sales Statistics: SAP-System-Screenshot ........................................................... 109
8/20/2019 IBP Part 06 Sales v02
8/121
Integrated Processes with SAP ERP – Sales Order Management
Sales Order Management in SAP ERP
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 8
1
Sales Order Management in SAP ERP
This teaching unit aims at giving you an understanding of sales order management in the SAP
ERP system. Thereby, the Order to Cash Business Process is discussed in detail.
Educational objectives in this unit:
At the conclusion of this unit, you will be able to:
- list the master data and organizational levels important to sales order management
- run the order-to-cash business process
-
disclose the key integration points with other SAP ERP processes
-
identify the reporting and analysis tools used in sales order management
Scenario for the Case Study
First of all, in the practical application section of this unit, you will create a customer master
record and sales conditions for the Speedstarlett.After entering a sales order, you will perform the materials planning and manufacturing exe-
cution processes that you are already familiar with for the Speedstarlett. Production is thereby
carried out with reference to the sales order.
After production, you will carry out dispatch handling and delivery of the product to the cus-
tomer, as well as billing and entering incoming payments. Finally, you will get to know the
reporting and analysis tool of the SAP sales and distribution module.
In the subsequent figure, you can see the entire process that you will perform independently
using the SAP ERP system. The red highlighted process step of entering incoming payments
is part of the SAP FI (financial accounting) module. You will focus on this functional area ina subsequent unit of this course.
8/20/2019 IBP Part 06 Sales v02
9/121
Integrated Processes with SAP ERP – Sales Order Management
Sales Order Management in SAP ERP
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 9
Figure 1: Process Overview: Sales Order Management
8/20/2019 IBP Part 06 Sales v02
10/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 10
2
Organizational Levels and Master Data of SAP ERP
Sales
This section explains the organizational levels of the SAP ERP system that are relevant for
the sales processes. Furthermore, master data of the sales application are introduced.
2.1 Theory: Organizational Levels in Sales Order Management
You have already become acquainted with the main organizational units in
SAP ERP. For instance, these were the client, company codes, plants, sales
organizations, etc. In the following, organizational units that are relevant for the
sales order management are introduced. Note that there are organizational units
like the client or company code, which are relevant to more than one functional
area.
2.1.1 Organizational Levels in Sales Order Management: Overview
Organizational levels of a company correspond to its structure, representing the legal and or-
ganizational views of a company. A company’s structure can be represented using organiz a-
tional levels based on the business processes carried out in the company. In the subsequent
chapters, you will get to know the most important organizational levels in sales order man-
agement.
The sales and distribution (SAP SD) application of the SAP ERP system uses several organ-
izational levels that can only represent sales and distribution processes, e.g., sales organiza-
tion, distri bution channel, divisions or shipping poin ts . Other organizational levels such as
company codes or plants are used by the SAP SD application and by other applications as
well.
Figure 2: Organizational Levels of Sales Order Management
8/20/2019 IBP Part 06 Sales v02
11/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 11
2.1.2 Company Code
You are already familiar with the company code as an organizational level in the SAP ERP
system. This organizational level is relevant to all business processes within the SAP system
and, thus, relevant to all SAP modules.
A company code can represent a complete independent accounting unit and, thus, representthe smallest organizational level for external accounting. This includes the entry of all ac-
countable transactions and the creation of all proofs for the individual account closings, e.g.,
balance sheets and profit and loss statements.
Example of a company code: a company within a corporate group or a subsidiary.
Figure 3: Company Code
2.1.3 Sales Organization
A sales organization is an organizational level in logistics (SAP LO as superior application
to SAP SD) that groups the company according to sales and distribution requirements.
A sales organization is responsible for the distribution of goods and services. This also in-
cludes liability for sold products and the responsibility for customers’ r ights of recourse . Ad-
ditionally, the sales organization is used to group the market, e.g., regionally, nationally, and
internationally. Moreover, the negotiation of sales condit ions is carried out at sales organiza-
tion level.
A sales organization is uniquely assigned to one company code. You can assign several sales
organizations to one company code. Thereby, the company code manages the correct account-
ing of sales transaction value flows in SAP FI. If you want to use the SD application in a SAP
ERP implementation, you must create at least one sales organization.
A sales organization features individual master data and individual data relevant for SD. In
sales statistics, a sales organization is the highest aggregation level for, e.g., sales order da-
ta.All items listed on an SD document, i.e., all items of a sales order, an outbound delivery or
billing document belong to a sales organization.
8/20/2019 IBP Part 06 Sales v02
12/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 12
Figure 4: Sale Organization
2.1.4 Distribution Channel
A distribution channel is the channel by which goods or services reach the customer. That is,
a distribution channel is the area in which a company does business. At a very basic level it
could be thought of as a way to classify customers. For instance, "internet sales" (web shop) is
one type of a distribution channel. Other examples for a distribution channel are a factory
outlet or a department store.
You can assign several distribution channels to a sales organization. When using the SD ap-
plication, you need at least one distribution channel. Examples for the usage of distribution
channels:- definition of responsibilities
- achievement of flexible pricing
- differentiation of sales statistics
Figure 5: Distribution Channel
8/20/2019 IBP Part 06 Sales v02
13/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 13
2.1.5 Division
Divisions are used to group materials and services. One sales organization can be responsible
for multiple divisions. Therefore, you can assign multiple divisions to one sales organization
in customizing. When using the SD module, you need at least one division. By using the divi-
sion, the system determines the sales areas to which a material or a service is assigned to.A division can be, for example, a product group or product line. Thus, you can, for example,
limit price agreements with a customer to a particular division. Moreover, you can run statis-
tical analyses according to divisions.
Figure 6: Division
2.1.6 Sales Area
Sales areas are a particularly important organizational unit in SAP ERP. A sales area, there-
by, is a unique combination of sales organization, distr ibution channel and division. The
sales area defines the distribution channel through which a sales organization sells products
from a certain division. Each sales and distribution document (e.g., sales order) is assigned to
exactly one sales area. This assignment cannot be changed. That is, when creating a sales
document (e.g., sales order), the responsible sales area must be assigned!A sales area is assigned to exactly one company code. This relation is created according to
the assignment of the sales organization to the company code in customizing.
When processing sales and distribution documents, the system uses various master data.
These master data are accessed according to the sales area. This includes, for example, cus-
tomer master data, material master data, prices and discounts . Moreover, the system carries
out various checks regarding the validity of particular entries according to the sales area.
A simple organizational structure is preferable to a complex one. For example,
the update of master data is facilitated in a simple organizational structure. Do
not define complex organizational structures in order to get detailed reporting
options. Rather use the fields in the master data screen.
8/20/2019 IBP Part 06 Sales v02
14/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 14
Figure 7: Sales Area
2.1.7 Plant and Storage Location
You are already familiar with these two organizational levels as well. Plant and storage loca-
tion are organizational units for inventory management, in Materials Management (SAP
MM). The plant is a location where material stock is kept. Thereby, a plant can, for example,
be a production facility or merely a group of geographically close (storage) locations. Plantand storage location are organizational levels that can be used in all areas of logistics.
- In materials management, the focus is on material flow. From a materials manage-
ment point of view, a plant is predominantly a storage location for material stocks.
- From a production point of view, a plant is a production facility.
- In sales and distribution, the plant is the location from which materials and services
are distributed. In a plant, the relevant stocks are stored.
- For services distributed by a company, the plant is the location where services are ren-
dered (e.g., an office).
In sales and distri bution , the plant has a central function:
- You maintain at least one plant in the SAP ERP system to be able to use the SAP SD
application.
- A plant must be uniquely assigned to one company code.
- The assignment between sales organization and plants does not need to be unique.
- If a plant is to be used as a delivering plant, it must be assigned to a sales organiza-
tion (and distribution channel) (N:N relationship).
-
The plant is required for determining shipping points if it is used as a delivering
plant.
8/20/2019 IBP Part 06 Sales v02
15/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 15
Figure 8: Plant and Storage Location
2.1.8 Shipping Point
Shipping is a module integrated in the sales and distribution process. The highest organiza-
tional level of shipping is the shipping point. The shipping point is responsible for organizing
and executing shipping processing. It is assigned to the plant (N:N relationship). For each
outbound delivery, a responsible shipping point must be entered, i.e., there can be no delivery
without a shipping point.
The shipping point can be a loading ramp, a mail depot or a rail depot. Moreover, the shipping
point can consist of a group of employees in charge of organizing (only) urgent deliveries.
The organizational assignment of shipping point is carried out at plant level. A shipping point
is a physical location and should be close to the delivering plant. You can assign multiple
shipping points to a plant. This can also be appropriate for plants that are geographically close
to each other.
Figure 9: Shipping Point
8/20/2019 IBP Part 06 Sales v02
16/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 16
2.2 Theory: Master Data in Sales Order Management
When entering a sales order into the system, data from different sources can be
copied or transferred directly to a sales order or another sales and distribution
document. Most of these data are default values that can be overwritten in the
sales and distribution document if necessary.
These data sources include:
- customer master data
- mater ial master data
- condition master data (These master data are created and maintained in the sales and
distribution master data for automatic pricing, e.g., this can be a material price or a
customer-specific discount.)
- output is information that is sent to the customer via different media types such as
mail, EDI, or fax. Examples: Printout of an offer or an order confirmation, order con-firmations via EDI or invoices via fax.
Control tables: These tables can be created and maintained in customizing. According to the
table settings, default values of several data can be controlled in sales and distribution docu-
ments.
A sales and distribution document can be the data source for another sales and distribution
document. A quotation already containing customer data can transfer data to a sales order for
this quotation. Thus, a sales and distribution document (quotation) can be a data source for
another sales and distribution document (sales order) as well.
Figure 10: Master Data
2.2.1 Customer Master
The customer master (analogously to the vendor master) groups data into the following cate-gories: general data, sales area data and company code data .
8/20/2019 IBP Part 06 Sales v02
17/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 17
General data are relevant to sales and distribution and for accounting purposes. They are
stored centrally (client-specific) to avoid data redundancies. They are valid for all organiza-
tional units of a client. The general area includes, for example, the customer’s name, address,
language, and telephone data.
Sales area data are relevant to sales and distribution. They are valid for a respective sales
area (sales organization, distribution channel and division). Data that is stored in this area
includes, for example, data on order processing, shipping, and billing.
Company code data are relevant to accounting. They are valid for a respective company
code for which a client is created. Company code data includes, for example, the reconcilia-
tion account number, terms of payment, and dunning procedure.
Figure 11: Customer Master Data
Partner Functions for the Customer Master
You use partner functions to define the rights and responsibilities of each business partner in a
business transaction. You assign partner functions if you create a master record for a business
partner. Thereby, you enter partner functions in the sales area data ( partner functions tab)
view of the customer master data. When entering sales orders in sales order processing, theyare copied as default values to the respective documents.
For sales order processing, the partner functions sold-to-party, ship-to-party and bill-to-
party are mandatory. During sales order processing, they may differ or be identical.
- sold-to-party: contains data on sales such as the assignment to a sales office or a valid
price list
- ship-to-party: contains data for shipping such as unloading point and goods receiving
hours
- bill-to-party: contains the address and data on document printing and electronic
communication
- payer: contains data on billing schedules and bank details
8/20/2019 IBP Part 06 Sales v02
18/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 18
Other partner functions such as contact person or forwarding agent are not absolutely manda-
tory for sales order processing.
Figure 12: Partner Functions for the Customer Master
2.2.2 Material Master
Basic data in a material master are relevant for all areas. They are valid for all organizational
units of a client.
Sales organization data are relevant for sales and distribution. They are valid for a particular
sales organization and distribution channel.
Sales plant data are relevant for sales and distribution as well. They are valid for a particular
delivery plant.
Other data relevant for different organizational units are available for other functional areas.
Figure 13: Material Master
8/20/2019 IBP Part 06 Sales v02
19/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 19
2.2.3 Customer-Material Information Record
Using the customer-material information record, you can record data for a combination of
particular customers and materials.
If a customer-material information record is available for a customer and a material, these
values are preferred to the values of customer master and material master when processingdocuments (order, delivery).
The following data can be maintained in a customer-material information record:
- A link from your material number to a material number of the customer and to the ma-
terial description of the customer.
- Specific shipping information for a particular customer and material (e.g., tolerances,
information whether customer accepts partial deliveries, or the default delivery plant).
Figure 14: Customer-Material Information Record
2.2.4 Output
Output represents information that can be sent to the customer via different media such as
mail, EDI, or fax. Examples are the printout of a quotation or an order confirmation, orderconfirmations via EDI or invoices via fax.
Like for pricing functionalities, output determination uses the condition techniques of SAP
ERP. The output can be sent for various sales and distribution documents (order, delivery, and
billing). In the output master data, transmission medium, time, and partner functions for an
output type are defined.
Examples of output types : quotation, order confirmation, invoices.
Examples of partner functions : sold-to-party, ship-to-party, and bill-to-party.
Examples of transmission media : printer, telex, fax, mail, EDI.Examples of times at which output can be sent: immediately after saving or with a regularly
run standard program (RSNAST00).
8/20/2019 IBP Part 06 Sales v02
20/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 20
Output layout is defined by a SAP form. The form is then assigned to an output type.
Figure 15: Output
2.2.5 Condition Master
The term pricing is used broadly for describing the calculation of prices (for external use bycustomers or vendors) as well as for costs (for internal purposes, such as cost accounting).
Conditions represent a set of circumstances that apply when a price is calculated. For exam-
ple, a particular customer orders a certain quantity of a particular product on a certain day.
The variable factors (the customer, the product, the order quantity, the date) determine the
final price the customer gets. The information about each of these factors can be stored in the
system as master data. This master data is stored in the form of condition records.
Prices, surcharges and discounts, freights and taxes are condition master data.
Condition master data (condition records) can be defined depending on various data. You
have, for example, the possibility to enter a customer-specific material price or a discount
depending on the customer and the material pricing group.
8/20/2019 IBP Part 06 Sales v02
21/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 21
Figure 16: Condition Master
8/20/2019 IBP Part 06 Sales v02
22/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 22
2.3 Practice: Maintain Master Data in SAP ERP Sales
A new customer orders products from your company. The customer is interest-
ed in 500 units of the Speedstarlett.
Sales orders contain customer data, product data and delivery schedule data.These data are used by customer service employees to inform customers about
prices and delivery dates prior to order confirmation. Additionally, they answer customer que-
ries using these data.
After receiving the order, the products are picked (all variances from the order quantity are
recorded) and the delivery documents are printed out. When the delivery is released (goods
are taken out of stock) to the customer, the stock quantities need to be reduced and the general
ledger needs to be updated. After shipping goods to the customer, an invoice needs to be cre-
ated. Unpaid customer items are checked periodically by the accounting department and pay-
ment receipts for customers that have paid are posted.
You, being a member of the project team, need to understand the sales order management
cycle and the most important sales and distribution functions in this cycle.
In the material planning unit of this course, you already created a sales order
using a customer (1000) that was already present in the SAP system. Thereby,
the focus was on understanding MRP in SAP ERP and on setting planned inde-
pendent requirements off against actual requirements from sales orders.
At this point, you are supposed to understand the entire process of order-to-
cash and include a new customer in this process. This order-to-cash process is primarily lo-
cated in the sales and distribution (SD) module. The SD module is part of the SAP logistics(LO) component. Other modules of LO are MM (materials management: procurement) and
PP (production planning; materials planning, manufacturing execution) that you are already
familiar with.
Interfaces of the order-to-cash process to other modules are as follows:
- MM: procure materials for the production of the Speedstarlett
- PP: materials planning, MRP and manufacturing execution
- FI: customer pays an invoice
- CO: posting production and procurement costs (is carried out automatically by the
SAP system)
You will now enter the new customer and maintain conditions for your products in the sys-
tem.
Figure 17: Process Overview: Customer Master Data
8/20/2019 IBP Part 06 Sales v02
23/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 23
2.3.1 Create Customer Master
Start with the customer master record.
Customer master data in the ERP system are used by the FI and SD functional areas:
-
SD: pricing group, delivery priority, ship-to-party, etc.- FI: account processing, cash discount period, dunning procedures, etc.
The customer master is separated in three different views for these diverse purposes. In actual
business processes, the various views are maintained by the respective departments.
Definition: Customer
A customer is a business partner of your company for whom receivables are present for an
occurred delivery or a transferred right.
2.3.1.1 Create Customer
Choose the following transaction:
Logistics Sales and Di str ibution Master Data Business Partners Customer
Create Complete (XD01)
Enter the following data on the Customer Create: I ni tial Screen :
1. Account group 0001 sold-to-party
2.
Customer 5xxyy 3. Company code 1000
4. Sales organization 1000
5. Distribution channel 10
6. Division 00
7. Confirm with Enter .
Figure 18: Create Customer: SAP-System-Screenshot
8/20/2019 IBP Part 06 Sales v02
24/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 24
The system displays multiple screens (tabs) with reference to the creation of the customer
master record. Due to time restrictions, you will only enter necessary data. Take a look at each
view and enter the required data. Also explore fields not used in this scenario (F1- and F4-
help). Go to the next view by using the display next tab ( ) symbol or F8. When promptedto do so, save.
Address tab
1. Name your name
2. Search term Customer-xxyy
3. City Stuttgart
4. Country DE (Germany)
5. Transportation zone 0000000001
6. Language German
7.
Press Enter .
8.
Press .
Figure 19: Create Customer - General Data: SAP-System-Screenshot
8/20/2019 IBP Part 06 Sales v02
25/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 25
Control data tab
1. No entries.
2. Press .
Payment transaction tab
1. No entries.
2.
Press .
Marketing tab
1. No entries.
2. Press .
Unloading point tab
1. No entries.
2. Press .
Export data tab
1.
No entries.
2. Press .
Contact person tab
1. No entries.
2. Press .
Select the button.
Account management tab
1. Reconciliation account 140000
2. Press .
Figure 20: Create Customer - Reconciliation Account: SAP-System-Screenshot
8/20/2019 IBP Part 06 Sales v02
26/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 26
Payment transaction tab
1. No entries.
2. Press .
Correspondence tab1. No entries.
2.
Press .
Insurance tab
1.
No entries.
2. Press .
Choose the button.
Sales tab
1. Sales district 000002
2. Press .
Shipping tab
1. Shipping conditions 02 (Standard)
2. Delivering plant 1000
3. Press .
Billing Documents tab
1. Incoterms EXW (Ex Works)
2. Terms of Payment 0001 (immediately payable without deductions)
3. Tax classification 1 (assessable)
4. Press .
Partner functions tab
1. No entries
2. Press .
Save the customer master record and leave the transaction.
2.3.1.2 Extend Customer Master Record
Extend your customer master record so that you can use it in sales area 1000/12/00 as well.
Use the data from sales area 1000/10/00 as reference. Call up the following transaction:
Logistics Sales and Di str ibution Master Data Business Partners Customer
Create Sales and Distr ibution (VD01)
On the Create customer: ini tial screen enter the following data:
8/20/2019 IBP Part 06 Sales v02
27/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 27
1.
Account group sold-to-party
2.
Customer 5xxyy
3.
Sales organization 1000
4.
Distribution channel 12 (! )
5.
Division 00
In the mandatory template fields , enter the following data:
1.
Customer 5xxyy
2.
Sales organization 1000
3.
Distribution channel 10 (! )
4. Division 00
Press Enter .
Figure 21: Extend Customer Master Data - New Sales Area SAP-System-Screenshot
You can see that the company code data button is missing. This is because transaction VD01
(sales and distribution) includes only sales organization views in contrast to transaction XD01
(complete). Save the customer. Thus, the customer master is extended by the distribution
channel sold for resale (12) .
2.3.1.3 Display Customer Master Record
Display the created customer master record (50xyy) and answer the following questions.
Therefore, call up
Logistics Sales and Di str ibution Master Data Business Partners Customer
Display Complete (XD03)
In the Display customer: ini tial screen enter the following data:
1.
Customer 5xxyy 2. Company code 1000
3. Sales organization 1000
8/20/2019 IBP Part 06 Sales v02
28/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 28
4.
Distribution channel 12 (! )
5.
Division 00
Choose Enter and answer the following questions. List the answers on your data sheet.
1.
Select the sales tab (sales area data). What is the definition of customer group ? How
did you get this information?
2.
Select the bil l ing document tab (sales area data). What is the purpose of Terms of
payment ?
3.
Select the account management tab (company code data). What is the purpose of the
reconci li ation account ?
Leave the transaction.
2.3.2 Create Conditions
Your finished products Speedstar and Speedstarlett do not feature a sales price as you could
see in the material planning unit (you were required to manually enter a sales price of 3000 €
resp. 2500 €). Since there will be an order for the Speedstarlett in this case study, maintain the
sales conditions for the Speedstarlett.
Figure 22: Process overview: Condition records
Definition: Sales Condition
A sales condition is an agreement regarding prices, surcharges/discounts, taxes and so on that
is valid within a defined period of time depending on selected factors such as customer group,
customer and material type.
2.3.2.1 Create Product-specific Condition Record
The condition PR00 (price) is mandatory and must, therefore, be maintained. It can be created
for each sales organization and distribution channel. If not done yet, set the division in the
material master to 00 (cross-company). Choose
Logistics Sales and Distr ibut ion Master Data Products Mater ial Other Ma-
terial Change (MM02)
1. Enter your material Speedstarlett-xxyy and confirm with Enter .
2.
Select the Sales: Sales Org. Data 1 view. Confirm with Enter .
3.
Enter plant 1000 , sales organization 1000 and distribution channel 10 and confirm
with Enter .
8/20/2019 IBP Part 06 Sales v02
29/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 29
4.
If the division is not set yet, enter 00 in the specific field.
5. Click the button.
6. Define the following for the Speedstarlett: from the curr ent date to 31.12.9999 , and
from a sales quantity of one, a price of 2500€ is applicable. From a sales quantity of
500, a sales price of 2300€ per unit is applicable.- Enter 1 in the first line of the fixed-scale quantities column and 2500 in the
amount column.
- In the second row, enter the fixed-scale quantity 500 and an amount of 2300 .
- Choose Enter and save the modification.
Figure 23: Create Material-specific Condition Record: SAP-System-Screenshot
You maintained the sales price with the respective fixed-scale quantities for the Speedstarlett
with the condition type PR00 (price condition). This condition record is applicable to all
Speedstarletts with the distribution channel 10 (final customer sales), sales organization 1000
and company code 1000.
When creating a new sales order and you choose, for example, distribution channel 12, this
condition is not valid, since you did not maintain it for Sales area 1000/12/00. In that case,
you would be prompted to enter a sales price as in the material planning teaching unit. Thus,
it is ensured that this condition is only applicable to distribution channel 10 (Sales area
1000/10/00).
2.3.2.2 Create Customer-specific Condition Record
Your new customer negotiated special conditions with the SD department. They agreed on a
price per unit of only 2400 € and from a sales quantity of 500 units, on a sales price of 2200€
per unit. Maintain the customer-specific condition. Choose
Logistics Sales and Distr ibution Master Data Conditions Create (VK31)
1.
In the left-hand menu, select Prices I ndividual Prices with a double-click.2. Now double-click the line .
8/20/2019 IBP Part 06 Sales v02
30/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 30
3.
Enter Sales organization Germany F rankf ur t (1000) , distribution channel final
customer sales (10) and your new customer 5xxyy .
4.
Enter the following data:
- Condition type PR00 (price)
- Material Speedstarlett-xxyy
- Amount 2400
- Unit EUR
- per 1
- Unit PC
- Valid from the cur rent date
- Valid to 31.12 .9999
- Confirm with Enter .
Figure 24: Create Customer-individual Condition Record: SAP-System-Screenshot
5. Select the row and click the symbol (scales) on the top left side of the screen. Ar-
range the condition so that the price is 2400 € from a scales quantity of one unit and
from a scales quantity of 500 , the price is 2200 €.
Figure 25: Maintain Scales: SAP-System-Screenshot
6. Save your entries.
8/20/2019 IBP Part 06 Sales v02
31/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 31
Thus, all relevant master data (customer master record, conditions) are maintained from a SD
point of view.
You have created a customer who is valid for
-
Company Code 1000
-
Sales Area 1000/10/00
-
Sales Area 1000/12/00
You have created two condition records for the Speedstarlett:
-
PRODUCT-specific sales price (PR00) valid for Sales Area 1000/10/00 and ANY cus-
tomer
- CUSTOMER-specific sales price (PR00) valid for Sales Areas 1000/10/00 and custom-
er 5xxyy.
Next, take a look at the SD process (order-to-cash process).
8/20/2019 IBP Part 06 Sales v02
32/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 32
2.4 Elucidation
What have we learned so far?
The major outcome of this section was to give you an overview over the organ-
izational levels that are relevant for the sales process in SAP ERP and the dif-
ferent types of master data that are used in SAP Sales and Distribution (SAP
SD).
2.4.1 Organizational Levels in Sales Order Management
You have already become acquainted with the main organizational units in SAP ERP.
The following organizational levels are relevant in the Sales and Distribution application but
not exclusively:
Company Code:-
Is relevant to all business processes.
-
Can represent a complete independent accounting unit and, thus, represent the smallest
organizational level for external accounting (balance sheets and profit and loss state-
ments).
Plant/Storage Location:
-
Is a location where material stock is kept (production facility, a group of geographical-
ly close (storage) locations).
- Plant and storage location are organizational levels that can be used in all areas of lo-
gistics.
- In sales and distri bution , the plant has the following central functions:
o At least one plant must be defined in SAP ERP for SAP SD application.
o A plant is assigned to exactly one company code.
o A plant can be assigned to multiple sales organizations, a sales organization
can be assigned to multiple plants.
o If a plant is to be used as a delivering plant, it must be assigned to a sales or-
ganization (and distribution channel) (N:N relationship).
o A plant is required to determine responsible shipping points.
The following organizational levels are used exclusively in the Sales and Distribution applica-
tion:
Sales Organization:
- A sales organization groups the company according to sales and distribution require-
ments.
- A sales organization is responsible for the distribution of goods and services. This also
includes liability for sold products and the responsibility for customers’ rights of r e-
course.-
A sales organization is used to group the market (e.g., regionally, nationally and inter-
nationally).
8/20/2019 IBP Part 06 Sales v02
33/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 33
-
Sales conditions are defined on sales organization level.
-
A sales organization is assigned to exactly one company code. One company code
can have multiple sales organizations assigned.
-
One sales organization must at least be defined in SAP ERP if you want to use the SD
application.
-
A sales organization features individual master data and individual data that are rele-
vant for SD.
-
In sales statistics, a sales organization is the highest aggregation level
-
All items listed on a SD document belong to a sales organization.
Distribution Channel:
- A distribution channel is the channel by which goods or services reach the customer.
Examples of distribution channels are direct, wholesale, internet, end consumer, etc.
For instance, if you select distribution channel wholesale for a product, then this prod-
uct is sold by using intermediary sales channels (external partner), like grocery store.
In that case, your company does not have direct contact with the customer at point of
sales.
-
You can assign several distribution channels to a sales organization. When using the
SD application, you need at least one distribution channel.
-
Examples for the usage of distribution channels:
o definition of responsibilities
o achievement of flexible pricing
o differentiation of sales statistics
Divisions:
-
Divisions are used to group materials and services.
-
Multiple divisions can be assigned to one sales organization.
-
One division must be defined at least if you want to use the SD module.
- When the system determines the sales areas to which a material or a service is as-
signed to, it uses the division stated in the material master.
- Example of divisions: Bicycle could be defined as division in your company. In that
case, you could assign this division in the material master to your Speedstar and
Speedstarlett. Thus, you can, for example, limit price agreements with a customer to a
particular division. Moreover, you can run statistical analyses according to divisions.
Sales Area:
-
A sales area is a combination of sales organization, distribution channel and division.
-
The sales area defines the distribution channel through which a sales organization sells
products from a certain division.
-
Example:
o When creating the Speedstar, you first selected Sales Organization Frankfurt
(1000) and the distribution channel Final Customer (10) as organizational
units. That is, in customizing this combination is defined, allowing for salesorganization 1000 to sell products to Final Customers.
8/20/2019 IBP Part 06 Sales v02
34/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 34
o Then, in the master data views of Basic Data and/or Sales, you entered the Di-
vision 00 (cross-division). That is, the combination of sales organization 1000,
distribution channel 10 and division 00 is also defined in customizing
(1000/10/00). This combination is called sales area and states that cross-
division products can be sold from Frankfurt to Final Customers.
o You can define multiple of these combinations. For instance, the sales area
1000/01/00 also exists as well as 1000/10/02.
-
Sales areas are important in that each sales and distribution document (e.g., sales or-
der, delivery) are assigned to exactly one sales area. This assignment cannot be
changed after creating the SD document.
- A sales area is assigned to exactly one company code. This relation is stated in the al-
ready mandatory assignment of the sales organization to the company code. For in-
stance, the sales organization 1000 is assigned to company code 1000 (Germany), thus
the sales area 1000/10/00 is assigned to company code 1000.
-
When processing sales and distribution documents, the system uses various master da-
ta. These master data are accessed according to the sales area. This includes, for ex-
ample, customer master data, material master data, prices and discounts. Moreover, the
system carries out various checks regarding the validity of particular entries according
to the sales area. For instance, if you enter a customer in a sales order, the system
checks the sales areas a customer is assigned to and fills in the organizational units in
the sales order or presents alternatives you can choose from (if there are several sales
areas assigned).
Shipping points:-
The highest organizational level of shipping is the shipping point.
-
The shipping point manages shipping operations in SAP ERP. That is, there can be no
delivery without a shipping point.
-
Examples of shipping points: loading ramp, a mail depot, a rail depot, a group of em-
ployees in charge of organizing (only) urgent deliveries, etc.
- Shipping points are assigned to plants. Multiple shipping points can be assigned to a
plant.
2.4.2
Master Data in Sales Order Management
The SAP ERP system integrates many master data records in a SD document. That is, when
you, e.g., create a sales order, data from customer, material, pricing conditions, organizational
units, etc. are copied or transferred directly to the document. Most of these data are default
values that can be overwritten in the sales and distribution document if necessary.
Master data for SD application that are relevant in our context are:
Customer Master
- Customer master data (analogously to the vendor master) contains all data relevant for
customer processes. These data are grouped as follows:
o General data are valid client-wide and are relevant for sales and distribution
as well as for accounting purposes.
8/20/2019 IBP Part 06 Sales v02
35/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 35
o Sales area data are relevant to sales and distribution only and, thus, are only
valid for a respective sales area (sales organization, distribution channel and
division). That is, if you create a customer for sales area 1000/10/00 and you
want to use this customer in sales area 2000/10/00, you need to extend its mas-
ter data.
o Company code data are relevant to accounting and, thus, are defined for a
specific company code. That is, if you create a customer for company code
1000 and you want to use this customer in sales area 2000/10/00 you need to
extend its master data to company code 2000, since sales organization 2000 is
assigned to company code 2000.
- Partner Functions for the Customer Master
o Partner functions are used to identify and include business partners (e.g., cus-
tomer) in a sales process.
o On the partner functions tab in the customer's master sales area data, you can
enter diverse partner functions for one customer. In a sales process sold-to-
party, ship-to-party and bill-to-party are mandatory. Other partner functions
are, e.g., payer, sales employee, contact, etc.
o Example: You sell a product to a customer, but deliver it to a different person.
In that case, sold-to-party and ship-to-party are different. This is stated in the
sales order document. The subsequent delivery document uses the field ship-
to-party to retrieve the shipping address of the person the product is to be de-
livered to.
Material MasterMaterial Master Views exclusively relevant to SD application are:
- Sales: Sales Org. Data 1 and 2: The data stored here are relevant for sales and distri-
bution. They are valid for a particular sales organization and distribution channel.
Again, if you have created the material master for, e.g., sales area 1000/10/00, you on-
ly can sell this product in this sales area.
- Sales: General/Plant Data: The data stored here are relevant for sales and distribu-
tion as well. They are valid for a particular delivery plant and state from which plant a
material is delivered from.
Customer-Material Information Record
-
This master data is used to link a customer with materials.
-
If the customer uses a different identifier than the one you use for the material, you
can include this information in a customer-material info record. You can also include
in this record specific shipping details, such as minimum delivery quantity and partial
delivery conditions.
-
If a customer-material information record is available for a customer and a material,
these values are preferred to the values of customer master and material master when
processing documents (order, delivery).
Output
-
Every sales and distribution document can generate outputs.
8/20/2019 IBP Part 06 Sales v02
36/121
Integrated Processes with SAP ERP – Sales Order Management
Organizational Levels and Master Data of SAP ERP Sales
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 36
-
Outputs are information that can be sent to the customer, e.g., order confirmation, or
quotation.
-
You can use different media to send the output, e.g., via e-mail, EDI or fax.
-
What output is generated from a particular sales document is based on conditions to be
fulfilled. For that reason outputs use, like pricing functionalities in a sales document,
the condition techniques of SAP ERP.
-
Example for condition technique: You create a quotation for a customer. As a standard
process in your company, the customer receives a printout of the quotation via mail.
For this, you define in customizing of the sales quotation that an action is executed,
which prints out the sales quotation and initiates the mail delivery, when the condition
"document saved" is fulfilled. In your process, when you save the quotation, this ac-
tion is executed.
-
In the output master data, you define transmission medium, time and partner functions
for an output type.
-
Output layout, is defined by a SAP form. The form is then assigned to an output type.
A form is a pre-defined standard form in which you can enter data manually or the
system generates the data according to the sales process.
Condition Master
-
Conditions are used in SAP ERP to define, e.g., prices at which a product is sold to a
customer.
-
You can create condition records for prices, surcharges, discounts, freight costs and
taxes.
-
Condition records can be defined depending on various data. You have, for example,the possibility to enter a customer-specific material price or a discount depending on
the customer and the material pricing group. That is, you can define that customer X1
has to pay 100 € for product Y, whereas customer X2 pays 110 € but receives a dis-
count of 10 if he buys 10 units.
8/20/2019 IBP Part 06 Sales v02
37/121
Integrated Processes with SAP ERP – Sales Order Management
Order to Cash Business Process
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 37
3
Order to Cash Business Process
The following section focuses on the sales process in SAP ERP.
3.1
Theory: Order to Cash Business Process
To be able to process sales orders effectively, it is necessary that all activities
that fulfill customer requirements are integrated in a series of processes. The
application component, sales and distribution, allows for an integrated approach
to sales order management. The individual steps of the sales process are repre-
sented by documents in SAP ERP that are linked with each other.
3.1.1 Order-to-Cash Business Process
The Order to Cash business process consists of several steps. It begins with establishing and
maintaining customer relationships and ends with invoicing for delivery of goods or service
provided to the customer. Posting the customer incoming payments is part of the application
component Financial Accounting. The following figure displays an example of a sales process
and what process steps it contains.
Figure 26: Order-to-Cash Business Process
8/20/2019 IBP Part 06 Sales v02
38/121
Integrated Processes with SAP ERP – Sales Order Management
Order to Cash Business Process
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 38
3.1.2 Documents in Sales and Distribution
The order-to-cash process affects multiple applications and functions of the SAP ERP system.
The following figure looks at this process from a document point of view. For each of the
different process steps, the documents that the system creates are listed. It also shows some
integration points to other application within SAP ERP. The blocks in the following figurerepresent, from top to bottom, the standard sequence of the events in the sales and distribution
process. The boxes within the blocks represent sales and financial accounting documents. Not
all mentioned process steps must be carried out. For example, you can create a sales order
without a previously stated inquiry.
Figure 27: Documents in Sales and Distribution
Pre-sales Activities:
Sales order management usually starts with setting up and maintaining customer relationships.
This step includes mail advertisement, campaigns and creating customer databases with cus-
tomer contact data. Based on this data a customer inquiry can be captured or quotations sent
to the customer.The process shown in the figure above starts with entering a customer contact or with a cus-
tomer inquiry in which the customer asks for a particular product. When a company creates a
quotation in accordance to this inquiry, information from the inquiry document (customer
data, material/product, quantities, conditions, delivery date) is copied to the quotation. Thus,
data redundancies are avoided and data do not need to be entered again.
Pre-Sales Activities encompasses (brackets state the application in which and what type of
data is created):
-
Mailing- Campaigns
- Contacts (SAP SD: customer master data)
8/20/2019 IBP Part 06 Sales v02
39/121
Integrated Processes with SAP ERP – Sales Order Management
Order to Cash Business Process
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 39
-
Inquiries (SAP SD: inquiry document)
-
Quotations (SAP SD: quotation document)
Sales Order Processing:
The central part of sales order processing is the creation of the sales document. Inquiries,
quotations or sales orders are different examples of sales documents in the SAP ERP system.
These documents derive all data necessary for processing the customer’s demand for a prod-
uct from the appropriate master data in the system.
If the customer accepts the quotation, the quotation document is transferred into a sales order
document. A sales order, e.g., copies the customer data, product data, the pricing data, etc.,
from the preceding document (the quotation). All documents created with the whole process
are linked to each other and facilitate the transfer of data.
Sales Order Processing encompasses:
-
Customer (SAP SD: master data) and Material data (SAP SD: master data sales views)
-
Prices and Conditions (SAP SD: master data)
-
Schedule Lines (Info for outbound delivery)
-
Info for Billing
Procurement/ Inventory Sourcing:
To provide a customer with the product ordered, it might be necessary to purchase materials
for, e.g., production. In procurement, which is a functional area of materials management
(purchasing), the ERP system determines a vendor according to data stored in the system
(e.g., material, purchasing info records, conditions, vendor master data). Thereby, the follow-ing questions can be important:
-
Is delivery carried out from one of your delivery plants?
-
If this is true, which plant is it?
-
Is the vendor a third-party vendor?
- If this is true, which third-party vendor is it?
After processing the sales order (product is procured or produced), the requested goods can be
delivered.
Procurement / Inventory Sourcing encompasses:
-
Availability check
-
Goods issue from stock (SAP MM: material document)
-
External procurement (SAP MM: planned order, purchase requisition and purchase
order)
-
In-house production (SAP PP: planned order, production order)
Shipping:
When a product is ready to be delivered to the customer, shipping of the good must be orga-
nized. Organization and processing of delivery is part of the shipping process. The SAP sys-tem allows for transferring data from the sales order to the delivery document as well. After
creating the shipping document and fulfilling all goods transportation requirements (creating
8/20/2019 IBP Part 06 Sales v02
40/121
Integrated Processes with SAP ERP – Sales Order Management
Order to Cash Business Process
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/
Dipl.-Wirt.-Inf. Taymaz Khatami Page 40
transfer order, picking, packing) goods can be delivered and the goods issue can be posted.
With the goods issue posting a material document is created, which reduces the material
quantity on stock, and an accounting document, which posts the material valued to the materi-
al stock account.
Shipping encompasses
-
Outbound Delivery (SAP SD: delivery document)
-
Picking (SAP LE: transfer order document)
-
Packing (SAP SD: delivery document)
-
Transportation and Shipment (SAP LE: shipment document)
- Goods Issue: Stock Posting (SAP MM: material document, SAP FI: Accounting Doc-
ument)
Billing:
The billing process regularly starts when the product that has been ordered by the customer
has been delivered. In the billing component, a billing document is created out with reference
to the delivery or sales order document. The billing document creates receivables on the cus-
tomer account with the amount of the material quantity delivered multiplied by the sales
price. The invoice is created and all required data are transferred to financial accounting.
Sales order management is terminated with invoicing of delivered goods or of provided ser-
vices.
Billing encompasses
-
Invoice (SAP SD: billing document)-
Credit Memo and Debit Memo (SAP FI: accounting document)
-
Transfer to Financial Accounting
Payment:
Part of handling payments is the check of open items and the posting of incoming payments.
Posting incoming payments of a customer is part of the application component financial ac-
counting (SAP FI) and it is carried out, outside of the sales and distribution component (SAP
SD). When the customer pays the invoice, the customer account is cleared.
Payment (SAP FI) encompasses
-
Posting Incoming Payments (SAP FI: accounting clearing document)
-
Review of Differences
3.1.3 Pre-Sales Activities
To increase sales figures of a company, specific marketing activities such as direct mailing
campaigns, internet campaigns, trade fair sales activities or telephone campaigns can be used.
These activities can trigger sales processes, resulting in non-binding customer inquiries or
quotations. Inquiries and quotations enhance determining important sales data and can be
stored in documents. When the customer then places an order, you can access these data. For
8/20/2019 IBP Part 06 Sales v02
41/121
Integrated Processes with SAP ERP – Sales Order Management
Order to Cash Business Process
Copyright Prof. Dr. Heimo H. Adelsberger/Dipl.-Wirt.-Inf. Pouyan Khatami/