iA210VHF AIR BAND TRANSCEIVER
INSTRUCTION MANUAL
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
i
IMPORTANTREAD ALL INSTRUCTIONS carefully and completely before using the transceiver.
SAVE THIS INSTRUCTION MANUAL โ This in-struction manual contains important operating instructions for the IC-A210.
EXPLICIT DEFINITIONSThe explicit definitions below apply to this instruction man-ual.
R
DEFINITIONWORD
WARNING
CAUTION
NOTE
Personal injury, fire hazard or electric shock may occur.
Equipment damage may occur.
If disregarded, inconvenience only. No risk of personal injury, fire or electric shock.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor-porated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries.IBM is a registered trademark of International Business Machines.Microsoft, Windows and Windows Vista are registered trademarks of MicrosoftCorporation in the United States and/or other countries.
FEATURESโ Large, bright OLED displayA fixed mount VHF airband first, the IC-A210 has an organic light emitting diode (OLED) display. The all man-made lighting emits its own light and the display offers many advantages in brightness, vividness, high contrast, wide viewing angle and response time compared to a conventional display. In addition, the auto dimmer function can adjust the display for optimum brightness, during day or night.
โ Easy channel selectionItโs fast and easy to select any of the memory channels in the IC-A210. The โflip-flopโ arrow button switches between active and standby channels. The DualWatch function allows you to monitor two channels simultaneously. In addition, the history memory chan-nel stores the last 10 channels used and allows you to recall those channels easily.
โ GPS memory functionWhen connected to an external GPS receiver* equipped with an air-port frequency database, the IC-A210 will instantly tune in the local airport frequency as you fly into its airspace.*Ask your dealer for available GPS receiver details.
โ 13.8 V/27.5 V DC power sourceThe built-in DC-DC converter accepts a 13.8 or 27.5 V DC power source. The IC-A210 is easily installed in most airplanes or vehicles.
โ Intercom functionThe IC-A210 has a built-in voice activated intercom function allow-ing the pilot to talk with a co-pilot, or other person, via headsets. The IC-A210 has adjustable audio level and squelch control functions.
DO NOT place unit in a non-secure place to avoid inad-vertent use by children.
DO NOT push the PTT when not actually intending to transmit.
DO NOT use or place the transceiver in direct sunlight or in areas with temperatures below โ20ยฐC (โ4ยฐF) or above +55ยฐC (+131ยฐF).
DO NOT place the transceiver in excessively dusty envi-ronments.
DO NOT place the transceiver against walls. This will ob-struct heat dissipation.
DO NOT use chemical agents such as benzine or alcohol when cleaning, as they damage the transceiver surfaces.
BE CAREFUL! The transceiver will become hot when operating continuously for long periods.
PRECAUTIONS
ii
R WARNING! NEVER operate the transceiver with a headset or other audio accessories at high volume levels. Hearing experts advise against continuous high volume op-eration. If you experience a ringing in your ears, reduce the volume level or discontinue use.
NEVER connect the transceiver to an AC outlet or to a power source of more than 28 V DC. Such a connection will damage the transceiver.
NEVER connect the transceiver to a power source that is DC fused at more than 5 A. Accidental reverse connection will be protected by this fuse, higher fuse values will not give any protection against such accidents and the transceiver will be damaged.
DO NOT operate the transceiver near unshielded electri-cal blasting caps or in an explosive atmosphere.
DO NOT connect the transceiver to a power source using reverse polarity. This connection will not only blow fuses but also may damage the transceiver.
FCC caution: Changes or modifications to this transceiver, not expressly approved by Icom Inc., could void your authority to operate this transceiver under FCC regulations.
iii
IMPORTANT ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทiEXPLICIT DEFINITIONS ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทiFEATURES ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทiPRECAUTIONS ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท iiTABLE OF CONTENTS ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท iii1 PANEL DESCRIPTION ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท1 โ Front panel ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท1 โ Rear panelยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท3 โ Main unitยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท3 โ Function display ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท42 BASIC OPERATION ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท5 โ Frequency selection ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท5 โ Standby frequency selection (Step 1-2) ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท5 โ Frequency exchanging(Step 2-2) ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท6 โ Receiving ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท6 โ Transmitting ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท6 โ Frequency setting example ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท7 โ Direct frequency setting mode operation ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท8 โ DualWatch operation ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท83 MEMORY OPERATION ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท9 โ Programming notes ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท9 โ Entering memory mode ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท9 โ Memory channel type ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท9 โ Channel selection ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท10 โ Programming a memory channel ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท10 โ Programming example ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท11 โ Transferring memorycontents ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท12 โ Memory mode menu ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท12 ( Regular and group memory channels only) ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท12 โ Regular memory channel ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท13 โ Group memory channel ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท13 โ History memory channel ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท14 โ Clearing the memory contents ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 14 ( Regular and group memory channels only) ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท14
โ Programming channel names (Regular memory channel only) ยทยทยทยทยทยทยทยทยทยท15 โ Programming group names (Group memory channel only) ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท15 โ Programming channel tag (Group memory channel only) ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท16 โ Channel tag list ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท16 โ Weather memory channel (U.S.A. version only) ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท17 โ GPS memory ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท17 โ GPS memory edit ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท18 โ Memory protection ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท184 OTHER FUNCTIONS ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท19 โ Lock function ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท19 โ Accessing 121.5 MHzemergency frequency ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท19 โ Intercom function ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท20 โ Squelch test function ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท20 โ Weather memory channel scan (U.S.A. version only) ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท215 MENU MODE ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท22 โ MENU mode programming ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท22 โ MENU mode items ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท236 INSTALLATION AND REMOVALยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท28 โ Transceiver installation ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท28 โ Transceiver removal ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท287 CLONING ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท298 SPECIFICATIONS ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท309 OPTIONS ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท3110 SAFETY TRAINING INFORMATION ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท35
TABLE OF CONTENTS
1
1PANEL DESCRIPTION
01โ Front panel
q DUAL SWITCH [DUAL] โฅ Push to turn DualWatch operation ON or OFF (p. 8). โฅ Push and hold for 2 sec. to turn the intercom function
ON or OFF.
w EMERGENCY CHANNEL SWITCH [EC] โฅ Push to set the emergency frequency (121.5 MHz) as
the standby frequency (p. 19). โฅ Push and hold for 2 sec. to enter the direct frequency
setting mode (p. 8), and set the emergency frequency (121.5 MHz) (p. 19).
e VOLUME/POWER SWITCH [VOL] โฅ Turn [VOL] to switch the power ON or OFF (p. 5). โฅ Adjusts the audio output level. The volume level bar appears while rotating [VOL]. โฅ Push to set the squelch test function ON or OFF
(p. 20). โฅ Push and hold for 2 sec. to start the weather channel
(U.S.A. version only) scan (p. 21).
r FREQUENCY EXCHANGE (FLIP-FLOP) SWITCH [โ] โฅ Push to exchange the standby frequency with the ac-
tive frequency (p. 6). โฅ Push and hold for 2 sec. to enter direct frequency set-
ting mode (p. 8).
RCL
MEM
OFF
VOL
PUSHTEST
COMMDUAL EC
iA210CH09 SAMPLE
121.525118.00RX MEMORY
e ytr i ouq w
2
1 PANEL DESCRIPTION
โ Front panel (Continued)
tMEMORY SWITCH [MEM] Push and hold for 2 sec. to program a displayed fre-
quency to any blank regular memory channel or delete/revive the selected memory channel (depending on the operating mode) (p. 9).
yRECALL SWITCH [RCL] โฅ Push to enter/exit the memory mode (p. 9). โฅ Push and hold for 2 sec. to enter the menu mode
(p. 22).
uLIGHT-SENSITIVE DETECTOR This detector senses ambient light. The detector is used
to adjust โDimmer brightness (Low/High)โ (p. 25) auto-matically when the โDimmer Modeโ (p. 25) is set to โAUTO.โ
i INNER (Small) TUNING DIAL [DIAL] โฅ Rotate to set the standby frequencies (kHz digit)
(p. 5), memory channels (p. 10), MENU mode settings (p. 22).
โฅ Push and hold for 2 sec. to turn the dial/panel lock function ON (p. 19).
o OUTER (Large) TUNING DIAL [O-DIAL] โฅ Rotate to set the standby frequency (MHz digit) (p. 5),
group memory channel (p. 13), cursor position (p. 15), etc.
โฅ Rotate to change the scan direction while scanning (p. 21).
RCL
MEM
OFF
VOL
PUSHTEST
COMMDUAL EC
iA210CH09 SAMPLE
121.525118.00RX MEMORY
e ytr i ouq w
3
1PANEL DESCRIPTION
01โ Rear panel
q ANTENNA CONNECTOR Connect an antenna connector.w CLONING JACK Connect an optional cloning cable (OPC-1529R). Refer to
p. 29 for details.e DC, MICROPHONE, SPEAKER, HEADPHONE AND
DATA JACK Connect a 13.8 V or 27.5 V DC power supply, speaker,
headphone and 3rd party GPS receiver*1. Refer to the โINSTALLATION GUIDEโ for details. *1Ask your dealer for available GPS receiver details.
โ Main unit
q Metal catch (For Icom products) Use to attach to an installation rack for Icom products
(p. 28).w Metal catch (For 3rd party products*) Use to attach to an installation rack for 3rd party prod-
ucts* (p. 28). *Ask your dealer for available products details.
q w
e q
e
For PS-80 type
For the 3rd party* compatible type (MB-113)[NOTE]: Supplied with some transceiverโs versions.
*Ask your dealer for available products details.
โข Top view โข Bottom view
q w
4
1 PANEL DESCRIPTION
โ Function display
q ACTIVE FREQUENCY INDICATOR โฅ Shows the active frequency (p. 6). โฅ Shows the MENU mode items in the MENU mode
(p. 22).w TX INDICATOR Appears while transmitting (p. 6).e RX INDICATOR โฅ Appears when receiving a signal on the active fre-
quency signal (p. 6). โฅ Appears when receiving a signal on the standby fre-
quency signal during DualWatch operation (p. 8). โฅ Appears when opening the active frequencyโs squelch
function (p. 6).r INTERCOM INDICATOR Appears when the intercom function is in use (p. 20).
t DUALWATCH INDICATOR Appears when the DualWatch function is active (p. 8).y MEMORY CONDITION INDICATOR โฅ Indicates โMEMORYโ when the regular memory chan-
nel is selected (p. 13). โฅ Indicates โGRP01โGRP20โ when the group memory
channel is selected (p. 13). The group name is also indicated if the name has been
entered. โฅ Indicates โHISTORYโ when the history memory chan-
nel is selected (p. 14). โฅ Indicates โWEATHERโ when the weather memory
channel is selected (U.S.A. version only) (p. 17). โฅ Indicates โGPSโ when the GPS memory channel is se-
lected (The 3rd party GPS receiver is required) (p. 17).u STANDBY FREQUENCY INDICATOR โฅ Shows the standby frequency (p. 5). โฅ Shows the setting values in the MENU mode (p. 22).i CHANNEL NAME INDICATOR Shows the channel name during memory mode (p. 15).o MEMORY CHANNEL INDICATOR Shows the selected memory channel number during
memory mode (p. 13).!0 TEST INDICATOR Appears while the squelch test function is active (p. 20).!1 LOCK INDICATOR (p. 19) โฅ Indicates โ โ while the dial lock function is in use. โฅ Indicates โ โ while the panel lock function in use.
CH09 SAMPLETEST
121.525118.00RX DUAL MEMORY RXICS
O
F D
TX
e tr y e
io!1
uq
!0
w
5
2BASIC OPERATION
01
02
โ Frequency selectionIC-A210 has 2 ways to select a desired frequency.
รฏGeneral frequency selectionSelect a desired frequency which is used for the next operat-ing frequency in the standby frequency indicator. Then ex-change the active frequency for the standby frequency.
NOTE: Operate from โStandby frequency select ion (Step 1-2)โ to โFrequency exchanging (Step 2-2)โ as pgs. 5, 6.
รฏDirect frequency selectionA desired frequency direct selection is available.Refer to โDirect frequency selection mode operation.โ
โ Standby frequency selection (Step 1-2)
q Rotate [VOL] clockwise to turn power ON. โข Previously used frequencies appear in the active and
standby frequency indicators.w Rotate [DIAL] and [O-DIAL] to select a desired frequency
to the standby frequency. โข The active frequency is not affected. โข Rotate [O-DIAL] to set above 1 MHz digit. โข Rotate [DIAL] to set below 100 kHz digit.
TIP: For quick frequency setting, often used frequen-cies can be programmed into memory channels. Refer to โMEMORY OPERATIONโ (pgs. 9โ18).When a memory channel is recalled, the previous standby frequency is erased.
CAUTION: DO NOT turn the power ON until the air-craft engines have been started. It is very important for protection of the power supply circuit.
6
2 BASIC OPERATION
โ Frequency exchanging (Step 2-2)
q After selecting the standby frequency, push [โ] to ex-change it with the active frequency.
โข Adjust the squelch level in the menu mode, if necessary (p. 24).
โข Rotate [VOL] to set the volume level, if necessary. โข When receiving a signal, โRXโ appears and audio is heard from
the speaker or headset. โข Further adjustment of audio level may be necessary at this
point.
w Push and hold [PTT] to transmit, then speak into the mi-crophone.
โข Transmit indicator โTXโ lights.e Release [PTT] to receive.
Frequency exchanging can be also performed remotely from the yoke-mounted frequency exchange switch.
โ Receivingq Select an operating frequency. โข Refer to pgs. 5, 6 for details.
โข โRXโ appears when receiving a signal or opening squelch.
w Push [VOL] to open the squelch manually. โข Refer to p. 20 โSquelch test functionโ for details.
e Rotate the volume control to adjust the audio level.
โ Transmitting
q Select the yoke-mounted communication/intercom switch to the โcommunicationโ position.
w Select an operating frequency. โข Refer to pgs. 5, 6 in details.
e Push the PTT switch. โข โTXโ appears.
r Speak into the microphone at your normal voice level. โข DO NOT set the microphone too closely to your mouth or speak
too loudly. This may distort the signal.
t Release the PTT switch to receive.
NOTE: To prevent interference, listen on the frequency before transmitting. If the frequency is busy, wait until the frequency is clear.
NOTE: DO NOT push and hold [โ] continuously. Oth-erwise, the standby frequency disappears. If this happens, again push and hold [โ] until the standby frequency reap-pears.
7
2BASIC OPERATION
02
โ Frequency setting exampleThe following example shows to how to set 126.40 MHz as the standby frequency and then exchange it with the active fre-quency indicator.
The active frequency and the standby frequenies are exchanged.
Previously used frequencies appear.
Rotate the large tuning dial to change the standby frequency in MHz steps.
Rotate the small tuning dial to change the standby frequency in kHz steps.
121.805134.80RX
126.805134.80RX
126.405134.80RX
134.805126.40RX
qRotate [O-DIAL] clockwise to select โ126โ MHz.
wRotate [DIAL] counterclockwise to select โ400โ kHz.
ePush [๏ฟฝ].NOTE: DO NOT push and hold [๏ฟฝ] continuously. Otherwise the standby frequency disappears. If this happens, push and hold [๏ฟฝ] until the standy frequency reappears.
STEP DISPLAY NOTE
8
2 BASIC OPERATION
โ Direct frequency setting mode operation
The direct frequency setting mode operation is useful when setting a desired frequency directly as the active frequency.
q Push and hold [โ] for 2 sec. to enter the direct frequency setting mode.
โข Only the active frequency is displayed.
w Set an operating frequency. โข Refer to pgs. 5, 6 in details.
e Push [RCL] or [โ] to exit the direct frequency setting mode.
โ DualWatch operationThe DualWatch operation monitors the active frequency at certain intervals even when receiving a signal on the standby frequency. When a signal is received on the active frequency, the radio switches to the active frequency and stays on it until the signal disappears, irrespective of the standby frequency status.
q Push [DUAL] to enter DualWatch operation. โข โDUALโ appears on the active frequency indicator. โข The active or standby frequencyโs โRXโ blinks when receiving a
signal or opening the squelch.
w Push [DUAL] again to exit DualWatch operation. โข โDUALโ disappears.
121.80RX
129.405121.00RX DUAL RX
ATTENTION! During DualWatch operation, the standby frequencyโs audio may be interrupted at the monitoring in-terval, but this is not a malfunction.
9
3MEMORY OPERATION
02
03
โ Programming notesรฏ Blank channelA memory or group channel with no frequency content is called as a blank channel. When a blank channel is selected while memory programming, โโโโโโโ appears instead of a frequency.
รฏ Memory protect functionIC-A210 has a memory protect function. The function pre-vents accidental changes or deletion.The function can be set in the MENU mode (p. 24).
โ Entering memory modeโข Push [RCL] to enter the memory mode.โข Push [RCL] to set the selected memory channel frequency
to the standby frequency, then exit the memory mode.โข Push and hold [RCL] for 2 sec. to exit the memory mode
without changing the previously set standby frequency.
โ Memory channel typeThere are 5 memory types*. The memory types are as follow:* Depends on versions, there are 4 memory types.
รฏ Regular memory channel (MEMORY)There are up to 10 available memory channels.
รฏ Group memory channel (GRP01โGRP20)There are up to 200 group channels, with 10 channels in each of 20 groups.
รฏ Weather memory channel (WEATHER) (U.S.A. version ONLY)10 weather memory channels are available. They are used for monitoring NOAA (National Oceanic and Atmospheric Administration) broadcasts (reception of weather memory channels possible in U.S.A. version only).
รฏ History memory channel (HISTORY)There are up to 10 available history memory channels. The active frequency is written into history memory channels automatically when pushing [โ] to exchange the active and standby frequency (except weather channels: U.S.A. version only).
รฏ GPS memory channel (GPS)There are up to 10 available GPS memory channels.When connected to an external GPS receiver* equipped with an airport frequency database, the frequency data such as nearby airports can be transferred into GPS memory chan-nels .* Ask your dealer for available GPS receiver details.
10
3 MEMORY OPERATION
โ Programming a memory channel
To program the memory channels, follow the steps below.
q Rotate [DIAL] and [O-DIAL] to set a desired frequency for the standby frequency.
w Push [RCL] to enter the memory mode. โข The channel number appears. โข The memory channel name also appears if it has been entered.
e Rotate [O-DIAL] to select a desired memory channel type.
โข Select regular memory channel or group memory channel.
r Push [MEM], and then rotate [O-DIAL] to select the โRE-PLACEโ menu.
โข The memory channel number blinks.
t Rotate [DIAL] to select a memory channel to be pro-grammed.
y Push [MEM], to program the frequency into the channel. โข โWRITE COMPLETEDโ appears on the display when the regu-
lar memory channel is programmed.u Push [RCL] to exit the memory mode.
โ Channel selectionThe transceiver has 10 channels in regular memory and 200 channels in the group memory. There are 10 channels in each of 20 groups (GRP01โGRP20).
qPush [RCL] to enter the memory mode. โข The channel number appears. โข The memory channel name also appears if it has been entered.
wRotate [O-DIAL] to select the memory channel type. โข Select from regular memory channel or group memory channel.
e Rotate [DIAL] to select a desired memory channel number.
Transferring the memory channel to the active fre-quency is necessary if you want to operate on the memory channel frequency.
Refer to โTransferring memory contentsโ (p. 12) for details.
rPush [RCL] to change to standby frequency to the se-lected memory channel frequency and exit the memory mode.
CH01
127.005122.00RX MEMORY
NOTE: Push and hold [RCL] for 2 sec. to exit the mem-ory mode without changing the previously set standby fre-quency.
11
3MEMORY OPERATION
03
โ Programming exampleThe following is an example showing how to program 126.000 MHz into regular memory channel 4.
โ โ appears when no frequency has been programmed into regular memory channel 4.
โMEMORYโ and the channel number appear.
โ126.00โ appears in the standby display.126.005134.80
RX
CH01
134.80RX MEMORY
CH04
134.80RX MEMORY
CH04
126.000
---.---134.80RX MEMORY
REPLACE ร
CH04
126.005134.80RX MEMORY
Set a โ126.000 MHzโ in the standby display.
q
Push [RCL], then rotate [O-DIAL] to select โMEMORYโ.
w
Push [MEM], then rotate [O-DIAL] to select โREPLACE.โ
r
Push [MEM] to store the desired frequency into the selected regular memory channel.
t
Select regular memory channel 4 with [DIAL].
e
โWRITE COMPLETEDโ is displayed when the selected frequency is stored.
Regular memory channel number blinks.
TIP: Push and hold [MEM] for 2 sec. to program a displayed frequency into any blank memory channel automatically, after step q.
NOTE: The programming is cancelled if all regular memory channels have already programmed.
12
3 MEMORY OPERATION
โ Transferring memory contents
This function transfers a memory channelโs contents into the active frequency display and places the previous active frequency into the standby display.
q Push [RCL] to enter the memory mode. โข The channel number appears. โข The memory channel name also appears if it has been entered.
w Rotate [O-DIAL] to select a desired channel type. โข Select regular, group history, weather* or GPS memory chan-
nel. * Selectable depending on versions.
e Rotate [DIAL] to select a memory channel to be trans-ferred.
r Push [โ] to transfer the memory channel frequency into the active frequency display.
โข The memory mode is then cancelled automatically.
โ Memory mode menu ( Regular and group memory
channels only)รฏ REPLACEReplacing the standby frequency with the memory channel frequency.
รฏDELETEDeletes the selected memory channel.
รฏREVIVEReturns the selected memory channel to its previous state.
รฏCH NAME (Regular memory channel only)Sets the channel name to the selected regular memory channel.
รฏGRP NAME (Group memory channel only)Sets the group name to the selected memory group.
รฏCH TAG (Group memory channel only)Sets the channel tag to the selected memory channel (Se-lecting the group memory channel is the only option).
รฏDONEReturn to the memory mode.
CH01
127.005122.00RX MEMORY
122.005127.00RX MEMORY
Push [โ].
13
3MEMORY OPERATION
03
โ Regular memory channelThe transceiver has 10 regular memory channels. 5 programming options are selectable.The following functions are available.REPLACE, DELETE, REVIVE and CHANNEL NAME EDIT functions.
q Push [RCL] to enter the memory mode. โข The channel number appears.
โข The memory channel name also appears if it has been entered.
w Rotate [O-DIAL] to select the regular memory channel. โข โMEMORYโ appears.
e Rotate [DIAL] to select a desired channel.r Push [MEM], then rotate [O-DIAL] to select a menu op-
tion as follow. โข The memory channel number blinks.
t Push [MEM] to perform the selected action.
โ Group memory channelThe transceiver has 200 group memory channels comprised of 10 channels in each of 20 groups.The following functions are available.REPLACE, DELETE, REVIVE GROUP NAME EDIT and CHANNEL TAG functions.
q Push [RCL] to enter the memory mode. โข The channel number appears. โข The memory channel name also appears if it has been entered.w Rotate [O-DIAL] to select the group memory channel number. โข A group number โGRP01โGRP20โ appears.
e Push [DIAL], and then rotate [O-DIAL] to select the memory group from GRP01 to GRP20 if necessary.
โข The group and channel numbers blink. โข Push [DIAL] again, or push [RCL] to set the memory group.r Rotate [DIAL] to select a desired channel within the se-
lected group.t Push [MEM], rotate [O-DIAL] to select a menu as follows. โข The memory channel number blinks.
y Push [MEM] to perform the selected action.
CH01
127.005122.00RX GRP01
CH01
127.005122.00RX MEMORY
REPLACE Replace to the standby frequency.DELETE Delete the memory channel.REVIVE Revive the previous memory channel data.CH NAME Edit the memory channel name.DONE Do nothing and return to the memory mode.
REPLACE Replace to the standby frequency.DELETE Delete the memory channel.REVIVE Revive the previous memory channel data.GRP NAME Edit the group name.CH TAG Set the memory channel as a tag channel.DONE Do nothing and return to the memory mode.
14
3 MEMORY OPERATION
โ History memory channelThe transceiver has 10 history memory channels.The standby frequency is stored into a history memory chan-nel when pushing [โ].The frequency is stored into the history memory channel in order from โCH01โ to โCH10.โ
q Push [RCL] to enter the memory mode. โข The channel number appears. โข The memory channel name also appears if it has been entered.
w Rotate [O-DIAL] to select the history memory channel. โข โHISTORYโ appears.
e Rotate [DIAL] to select a desired channel. โข Push [โ] to exchange the history memory channel frequency
to the active frequency if necessary.
r Push [RCL] to exit the memory mode.
โ Clearing the memory contents ( Regular and group memory
channels only)Unwanted memory channels can be cleared.qPush [RCL] to select memory mode. โข The channel number appears. โข The memory channel name also appears if it has been entered.wRotate [O-DIAL] to select the memory channel type. โข Select from regular memory channel or group memory channel.e Rotate [DIAL] to select a desired channel.r Push [MEM], then rotate [O-DIAL] to select โDELETE.โ โข The memory channel number blinks.
t Push [MEM] to delete the memory channel data. โข โ-- -- -- -- -- --โ appears momentarily, then the next selectable
channel appears.
y Push [RCL] to exit the memory mode.
CH01
127.005122.00RX HISTORY
CH01
127.000
127.000122.00RX MEMORY
ร DELETE ร
CH01
122.00RX MEMORY
NOTE: Instead of steps r and t, pushing and holding [MEM] for 1 sec. after step e also allows delete or revive operation.
15
3MEMORY OPERATION
03
โ Programming channel names (Regular memory channel only)The regular memory channel can display a 6-character name in addition to the memory number.
q Push [RCL] to enter the memory mode, then rotate [O-DIAL] to select a desired regular memory channel in the memory mode.
w Rotate [DIAL] to select a desired channel.e Push [MEM], then rotate [O-DIAL] to select โCH NAME.โr Push [MEM]. The memory channel nameโs 1st digit blinks.t Rotate [DIAL] to select a desired character. โข The character type as shown below is selectable. โข Push [DIAL] to switch from capital letters (A, B, C, ยทยทยท) โ lower
case (a, b, c, ยทยทยท) โ number (0, 1, 2, ยทยทยท) โ then again to capital letters (A, B, C, ยทยทยท) in sequential order.
y Rotate [O-DIAL] to select the next input digit.u Repeat tโy to input the memory channel name.i Push [MEM] to set the memory channel name.
โข Selectable characters
โ Programming group names (Group memory channel only)The memory groups can display a 6-character name in addi-tion to the group number (โGRP01โโโGRP20โ).
q Push [RCL], then rotate [O-DIAL] to select a desired memory channel in the memory mode.
โข Rotate [O-DIAL] to select the memory channel type if neces-
sary.w Push [DIAL], and then rotate [O-DIAL] to select the
memory group from GRP01 to GRP20, if necessary. โข Push [DIAL] again to set the memory group.e Push [MEM], then rotate [O-DIAL] to select โGRP
NAMEโ.r Push [MEM], and the group nameโs 1st digit blinks.t Rotate [DIAL] to select a desired character. โข The character type as shown left โSelectable charactersโ is se-
lectable. โข Push [DIAL] to switch from capital letters (A, B, C, ยทยทยท) โ lower
case (a, b, c, ยทยทยท) โ number (0, 1, 2, ยทยทยท) โ then again to capital letters (A, B, C, ยทยทยท) in sequential order.
y Rotate [O-DIAL] to select the next input digit.u Repeat tโy to input the group name.i Push [MEM] to set the group name.
0 1 2 3 4 5 6 7 8 9 : ; < = > ? @
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \ ] ^ _ `
a b c d e f g h i j k l m n o p q r s t u v w x y z { | } ~ โ ! โ # $ % & โ ( ) โ + , โ . /
16
3 MEMORY OPERATION
โ Programming channel tag (Group memory channel only)The tag name can be set a 3-character name in addition to the group number. It is convenient for separating memory type.
q Push [RCL], then rotate [O-DIAL] to select a desired group memory channel in the memory mode.
โข Rotate [O-DIAL] to select the memory channel type if neces-
sary.w Push [MEM], then rotate [O-DIAL] to select โCH TAGโ
when selecting โLABELโ in โGroup memory channel dis-playโ of the menu mode (p. 24)
e Push [MEM], then rotate [DIAL] to select a desired chan-nel tag.
โข The tag type as shown below is selectable.
r Push [MEM] to set the channel tag.
โข Selectable tags
___ / TWR / GND / ATS / ATF / APP / ARR / AWS / CLR / CTF / DEP / FSS / RFS / UNI / MF / OTH / U-1 / U-2
โ Channel tag list
*1Group memory, *2GPS memory
CH01
127.005122.00RX GRP01
TWR
TAG NAME
DISPLAYMEANS
Group*1 GPS*2
_ _ _ YES โ Non-tagTWR YES YES TowerGND YES YES GroundATS YES YES ATISATF YES YES Air trafficAPP YES YES ApproachARR YES YES ArrivalAWS YES YES Automatic Weather StationCLR YES YES Clearance / DeliveryCTF YES YES Common Traffic Advisory FrequencyDEP YES YES Departure FrequencyFSS YES YES Flight Service StationRFS YES YES Remote Flight Service StationUNI YES YES Unicom frequencyMF YES YES Mandatory frequency
OTH YES โ OtherU-1 YES โ User1 setting (Refer to p. 26)U-2 YES โ User2 setting (Refer to p. 26)
17
3MEMORY OPERATION
03
โ GPS memoryWhen connected to an external GPS receiver* equipped with an airport frequency database, frequency data such as nearby airports can be transferred and made available in the GPS memory (maximum 10-memory channels).*Ask your dealer for available GPS receiver details.
q Push [RCL] to enter the memory mode. โข The channel number appears.w Rotate [O-DIAL] to select the GPS memory channel. โข โGPSโ appears.e Rotate [DIAL] to select a desired channel.rPush [RCL] to exit the GPS memory mode.
โ Weather memory channel (U.S.A. version only)The U.S.A. version has VHF marine WX (weather) channel receiving capability for flight planning.
q Push [RCL] to enter the memory mode. โข The channel number appears.w Rotate [O-DIAL] to select the weather memory channel. โข โWEATHERโ appears.e Rotate [DIAL] to select a desired channel.rPush [RCL] to exit the weather memory mode.
WX01
162.555122.00RX DUAL WEATHER
CH01 TWR
122.055122.00RX GPS RJTJ
Airport code
Tag name
โข Weather memory channel list
NOTE: โข See the GPS receiverโs instruction manual for transferring
the frequency data.โข Ask your dealer for available GPS receiver details.
Channel Frequency Channel FrequencyWX01 162.550 MHz WX06 162.500 MHzWX02 162.400 MHz WX07 162.525 MHzWX03 162.475 MHz WX08 161.650 MHzWX04 162.425 MHz WX09 161.775 MHzWX05 162.450 MHz WX10 163.275 MHz
18
3 MEMORY OPERATION
โ GPS memory editThe received GPS memory data is stored in the desired group memory channel.
q Push [RCL] to enter the memory mode. โข The channel number appears. โข The memory channel name also appears if it has been entered.
w Rotate [O-DIAL] to select the GPS memory channel. โข โGPSโ appears.e Push [MEM] to enter the GPS memory channel edit
mode, then rotate [O-DIAL] to select a desired group memory.
โข โGPSโ and airport code blink.r Push [MEM] to store the GPS memory channel data to
the selected group memory.t Push [RCL] to exit the memory mode.
NOTE:The GPS memory data is overwritten if the se-lected GPS memory channel already contains other data.
โ Memory protectionThe transceiver has memory protection which inhibits to the editing (storing, deleting, replacing, etc.) of the memory group memory channels.Refer to โMemory Protectionโ (p. 24) for details.
19
4OTHER FUNCTIONS
03
04
โ Lock functionThe lock function prevents accidental frequency changes and accidental function activation.q Push and hold [DIAL] for 2 sec. to turn the lock function
ON. โข โ
O
D โ appears when DIAL lock mode is selected. โข โ
O
P โ appears when PANEL lock mode is selected.
w To turn the function OFF, repeat step q above. โข โ
O
D โ or โ
O
P โ disappears.
โ Accessing 121.5 MHz emergency frequency
The IC-A210 can be set to the 121.5 MHz emergency fre-quency quickly. This function can be activated even when the key lock function is in use.q Push [EC] to call the emergency frequency to the standby
frequency, and enter the DualWatch operation automati-cally.
w Push [โ] to transfer emergency frequency to the active frequency if necessary.
โข โECโ appears.
e Push [โ] to exit from the emergency frequency. โข Set the frequency except 121.500 MHz before pushing [โ] to
the standby frequency if necessary. โข โECโ disappears.
NOTE: โECโ also appears on the display while the active frequency is set to 121.500 MHz.
NOTE: AUTOMATIC LOCK RELEASE FUNCTIONThis transceiver has an โAutomatic Lock Release Functionโ which releases the Lock function automatically when an operator gets into a panic.The lock function is released when pushing any keys (ex-cept [EC]) 8-times or rotating any dials (except [VOL]) 25-clicks for 5 sec.
CONVENIENT!: Push and hold [EC] for 2 sec. to enter the direct frequency setting mode (p. 8), and set the emer-gency frequency (121.5 MHz).โข โECโ appears.
20
4 OTHER FUNCTIONS
โ Intercom functionWhen 2-headphone and microphone jacks are connected to the transceiver, these headsets can be used as a voice-activated intercom.q Enter to the MENU mode. โข See p.22 for details.
w Set Intercom Usable Setting to ON. โข See p.27 for details.
e Exit from the MENU mode. โข See p.22 for details.
r Push and hold [DUAL] for 2 sec. to enable the intercom function.
โข โICSโ appears.
โข The headphone audio output level can be selected โOFF,โ โoutput level fixing (001โ080)โ or โinterlocking with [VOL]โ in the MENU mode (p. 23).
โข The microphone1 and microphone2 audio input levels can be also selected โOFFโ or โoutput level fixing (001โ080)โ in the MENU mode (p. 23).
โ Squelch test functionThis function opens the squelch manually for testing.q Push [VOL] to turn the squelch test function ON. โข โTESTโ appears.
w To turn the function OFF, repeat step q as above. โข โTESTโ disappears.
21
4OTHER FUNCTIONS
โ Weather memory channel scan (U.S.A. version only)
Scanning searches for weather channel signals automati-cally and makes it easier to listen purposes.Repeatedly scans all weather memory channels.This function is available for the U.S.A. version only.
q Set to the weather memory channel mode.w Push and hold [VOL] for 2 sec. to start weather memory
channel scan. โข To change the scan direction, turn [DIAL]. โข โNO WTHโ appears when no signal receives from WX01โ
WX10 channels. Then the weather memory channel scan stops
automatically. โข โSEARCHโ flashes while scanning.e Push and hold [VOL] for 2 sec. again to stop the scan.
162.555122.00RX WEATHER
SEARCH
04
22
5 MENU MODE
โ MENU mode programmingMENU mode is available at power ON and allows you to set seldom-changed settings. In this way you can customize transceiver operations to suit your preferences and operating style.
D Operating MENU modeq Rotate [VOL] to turn the transceiverโs power ON.w Push [RCL] to set VFO mode if memory mode is se-
lected.e Push and hold [RCL] for 2 sec. to enter the MENU mode.r Rotate [O-DIAL] to select setting items.t Rotate [DIAL] to select a desired setting.y Push [RCL] to exit MENU mode, and returning to the pre-
vious operating mode.
โข MENU mode items
MENU MODE
HP LEVEL AF GAIN
01/31
RCL
MEM
OFF
VOL
PUSHTEST
COMMDUAL EC
iA210
AF GAIN
OFF
001
076
Desired condition settingHP LEVEL
INCOM LV1
INCOM LV2
MIC1 SQL
Menu mode items setting
Menu mode items Items number
Setting value
p. 23
HP LEVEL
GRP MEMORY
INCOM LV2
INCOM LV1
MIC1 SQL
MIC2 SQL
ANL
SQL LEVEL
FM SQL LV*
*Not available on all versions.
LOCK MODE
DW INTERVAL
PRI. WATCH
MEM PROTECT
MIC2 GAIN
MIC1 GAIN
SIDETONE LV
TX MIC SEL
DISP HIGH
DISP MAN.
AUX LEVEL
DISP MODE
DISP LOW
DISP RESP.
FREQ DISP
U-1 ID SET
U-2 ID SET
AUX IN
BEEP
INCOM MODE
TIME OUT
INTERLOCK
MEM CLEAR
p. 26
p. 27
p. 25
p. 25
p. 24
23
5MENU MODE
โ MENU mode itemsD Headphone Level โHP LEVELโSet the headphone output level while receiving.โข AF gain : The output level is same as [VOL].โข OFF (0) : Mutes the headphone.โข 001โ080 : Sets audio level from 1 to 80.
D Intercom1 Microphone Audio Input Level โINCOM LV1โSet the intercom1 microphone input level.โข OFF (0) : Mutes the intercom1 microphone.โข 001โ080 : Sets the intercom1 input level from 1 to 80.
D Intercom2 Microphone Audio Input Level โINCOM LV2โ
Set the intercom2 microphone input level.โข OFF (0) : Mutes the intercom2 microphone.โข 001โ080 : Sets the intercom2 input level from 1 to 80.
.
D Intercom1 Squelch Level โMIC1 SQLโSet the intercom1 squelch level.The setting level is required to open the squelch when speaking to the intercom1.โข OFF (0) : Turns off the intercom1 squelch.โข 001โ030 : Sets the intercom1 squelch level from 1 to 30.
D Intercom2 Squelch Level โMIC2 SQLโSet the intercom2 squelch level.The setting level is required to open the squelch when speaking to the intercom2.โข OFF (0) : Turns off the intercom2 squelch.โข 001โ030 : Sets the intercom2 squelch level from 1 to 30.
D Automatic Noise Limiter โANLโThe ANL (Automatic Noise Limiter) function reduces noise components such as that caused by engine ignition systems while receiving.โข OFF : ANL function OFF.โข ON : ANL function ON.
05
24
5 MENU MODE
โ MENU mode items (Continued)
D AM Squelch Level โSQL LEVELโSet the squelch level for AM mode operation.In order to receive signals properly, as well as for the scan to function effectively, the squelch must be adjusted to the proper level.โข โ010โ010 : Setting AM squelch level from โ10 to +10.
D FM Squelch Level โFM SQL LVโ (U.S.A. version only)Set the squelch level for FM mode operation.โข โ010โ010 : Setting FM squelch level from โ10 to 10.
D Lock Mode โLOCK MODEโSet the lock function.โข OFF : The lock function is OFF.โข DIAL : The lock function applies to [DIAL].โข PANEL : The lock function applies to buttons on the front panel.
D DualWatch Interval โDW INTERVALโSet the interval time while operating DualWatch or weather scan.โข FAST : Sets the interval time to 300 msec.โข MID : Sets the interval time to 600 msec.โข SLOW : Sets the interval time to 2 sec.
.
D Priority Watch Interval โPRI. WATCHโSet the active frequency receive interval time while receiving the standby frequency.
โข FAST : Sets the interval time to 400 msec.โข MID : Sets the interval time to 800 msec.โข SLOW : Sets the interval time to 2 sec.
D Memory Protection โMEM PROTECTโSet the memory protection to regular memory channels and group memory channels.Editing the regular memory and group memory channels is inhibited while the protection is ON.โข OFF : The memory protection is OFF.โข ON : The memory protection is ON.
D Group Memory Channel Display โGRP MEMORYโ
Set the displaying whether the label displays or not.โข CH : Only the channel number is displayed.โข LABEL : The label is also displayed.
D Microphone1 Gain โMIC1 GAINโSet the microphone1โs gain.โข โ010โ010 : Setting the microphone1โs gain from โ10 to +10.
NOTE: The priority watch interval does not appear when the โPRIORITY WATCHโ is set to โOFFโ, by the CS-A210.
25
5MENU MODE
โ MENU mode items (Continued)
D Microphone2 Gain โMIC2 GAINโSet the microphone2โs gain.โข โ010โ010 : Setting the microphone2โs gain from โ10 to +10.
D Sidetone Level โSIDETONE LVโWhen using an optional headset (supplied from 3rd party*) via the adapter, the transceiver outputs your transmitted voice to the headset for monitoring.*Ask your dealer in details.โข OFF (0) : The sidetone function is OFF.โข 001โ080 : Sets sidetone level from 1 to 80.
D Transmitting Microphone Selection โTX MIC SELโSet the active microphone when pushing microphoneโs PTT switch.The item allows you to control which connected microphone is permitted to transmit.โข MIC1 : Selects microphone1.โข MIC2 : Selects microphone2.โข MIC1+2 : Selects both microphone1 and microphone2.
D Dimmer Mode โDISP MODEโThe light sensor which is built into the display is used for this function. Set the OLED dimmer mode.โข OFF : The dimmer function is OFF.โข AUTO : Sets the dimmer automatically depending on local
brightness.โข MANUAL : Sets the dimmer depending on Dimmer Brightness
(Low) โDISP LOWโ.
D Dimmer Brightness (Low) โDISP LOWโSet the lower brightness level in the automatic adjustment range when โAUTOโ is selected at the โDimmer Mode.โThe transceiver automatically adjusts its display brightness by the current lighting conditions.โข OFF : The key backlight sets OFF.โข 001โ049 : Sets low dimmer brightness level from 1 to 49.
D Dimmer Brightness (High) โDISP HIGHโSet the upper brightness level in the automatic adjustment range when โAUTOโ is selected in the Dimmer Mode.โข 050โ100 : Sets dimmer brightness level from 50 to 100.
05
26
5 MENU MODE
โ MENU mode items (Continued)
D Dimmer Brightness (Manually) โDISP MAN.โSet the brightness manually to suit your own preferences.โข 000โ100 : Setting dimmer level manually from 0 (OFF) to 100.
D Dimmer Response โDISP RESP.โSet the dimmer switching speed when selecting โAUTOโ at the โDimmer Mode.โโข STANDARD : Selects normal switching speed.โข FAST : Selects fast switching speed.
D Frequency Display โFREQ DISPโSet the 1 kHz digit frequency displaying in the OLED.โข OFF : The 1 kHz digit is not displayed in the OLED.โข ON : The 1 kHz digit is always displayed in the OLED.โข ZERO SUPP. : The 1 kHz is digit display on the OLED as 0.
D USER-1 Setting โU-1 ID SETโSet the USER-1, channel tag, to a desired ID.q Push [MEM] to enter the U-1 ID edit mode.w Rotate [DIAL] to select a desired character.e Rotate [O-DIAL] to select the next input digit.r Repeat wโe to input the U-1 ID.t Push [MEM] again to store the U-1 ID, and exit the edit mode.
D USER-2 Setting โU-2 ID SETโSet the USER-2, channel tag, to a desired ID.q Push [MEM] to enter the U-2 ID edit mode.w Rotate [DIAL] to select a desired character.e Rotate [O-DIAL] to select the next input digit.r Repeat wโe to input the U-2 ID.t Push [MEM] again to store the U-2 ID, and exit the edit mode.
D External Input โAUX INโSet the external input mode.โข OFF : The external input is OFF.โข ON : The external input is available while the squelch is
closed.โข INCOM : The external input is available with the intercom opera-
tions as following. - The intercom function is OFF. - While the intercom function is not in use. - While an audio signal is not input into the intercomโs
microphone.
27
5MENU MODE
โ MENU mode items (Continued)
D External Input Level โAUX LEVELโSet the external input level.โข OFF (0) : The external input does not operate.โข 001โ080 : Sets the external input level from 1 to 80.โข AF GAIN : Interlocked with [VOL].
D Beep Tone Level โBEEPโConfirmation beep tones normally sound when storing mem-ory, operating time-out-timer function, etc. These can be set a desired beep level as you prefer.โข OFF (0) : The beep tone turns OFF.โข 001โ100 : Setting the beep tone level from 1 to 100.
D Intercom Usable Setting โINCOM MODEโ Set the intercom using or not.โข ON : The intercom is usable.
โข OFF : The intercom is unusable.
D Time-Out-Timer โTIME OUTโTo prevent accidental prolonged transmission, the trans-ceiver has a time-out-timer function. This timer starts when a transmission begins, and will cut off the transmission when the time set in the timer elapses.โข 020โ240 : Setting time-out-timer starting period from 20 sec.
to 240 sec. in 10 sec. intervals.
D Interlock โINTERLOCKโWhen 2 transceivers are connected together, the interlock function can prevent them from transmitting at the same time.
โข TX INHIBIT : Transmission is prevented.
โข RX MUTE : Audio output is prevented.
โข BOTH : Transmission and audio output are both prevented.
D Memory Clear โMEM CLEARโSet values in the CPU are cleared.Push and hold [MEM] for 2 sec., the CPU is reset as follows.โข MENU : MENU mode items are reset.
โข MEMORY : Stored memories are reset.
โข ALL : All CPU data is reset.
05
NOTE: When using an external speaker, the beep tone level when the squelch is closed is fixed and cannot be changed in the MENU mode.
NOTE: The interlock does not appear when the โTX/RX INTERLOCK SWโ is set to โDISABLEโ, by the CS-A210.
28
6 INSTALLATION AND REMOVAL
โ Transceiver installation
q Insert a 3/32 inch allen wrench into the 2 holes in the front panel.
w Turn the wrench counterclockwise until the front panel is loose.
โข A cable connects the front panel with the main unit.
e CAREFULLY disconnect the flat cable from the front panelโs connector to remove the front panel.
r Visually confirm that the metal catches on the top and bottom of the transceiver are as shown below.
t Turn the wrench clockwise until the main unit is fixed to the installation rack.
โข Turn the wrench in the upper socket as shown below when using the installation rack for Icom products.
โข Turn the wrench when in the lower socket as shown below when using the installation rack for 3rd party* products.
y Replace the disconnected cable and put the front panel back in place.
โ Transceiver removalThe IC-A210 may easily be removed from the installation rack, if desired.q Perform the same steps as qโe of โTransceiver installa-
tionโ to remove the front panel (See the left column).w Turn the wrench counterclockwise until the main unit
moves slightly from the installation rack. โข See t of โTransceiver installationโ for details.e Pull out the main unit slowly from the installation rack.
RCL
MEM
OFF
VOL
PUSHTEST
COMMDUAL EC
iA210
Disconnectfrom here.
โข Front panel rear view
โข Main unit top/bottom view
โข Main unit front viewUse for pre-existingIcom radio installations
Use for pre-existing 3rd party radio* installations*Ask your dealer for available products details.
See the โINSTALLATION GUIDEโ for details when attaching IC-A210.
CAUTION: Treat the flat cable with care when discon-necting it to avoid possible damage.Improper care disconnecting the cable can cause damage and result in severe non-warranty repair.
CAUTION: Make sure that the flat cable between the main unit and front panel is securely and straight con-nected. The transceiver may not function properly when loose or when a wrong connection is made.Improper care disconnecting the cable can cause damage and result in severe non-warranty repair.
29
7CLONING
D Data cloning Cloning allows you to quickly and easily transfer the programmed contents or data from a PC to a transceiver using the optional CS-A210 CLONING SOFTWARE.
Data can be cloned to and from a PC (IBM compatible) using the optional CS-A210 CLONING SOFTWARE and the op-tional OPC-1529R CLONING CABLE (connect with the data jack). Consult the CS-A210 instruction manual and HELP file for details.
D Displayed Messageโข While clone writing.
โข When clone writing is finished properly.
โข When clone writing error occurs.
โข While clone reading.
โข If an error occurs while cloning, the following message ap-pears when the power is turned OFF and then ON. In this case, re-cloning or re-writing the data correctly is neces-sary to cancel the error.
CLONEWRITE
CLONEWRITE OK
CLONEWRITE ERR
CLONEREAD
CLONEREAD127.00
RX MEMORY
CLONENO DATA
06
07
30
8 SPECIFICATIONS
D Generalโข Frequency range : 118.000 to 136.975 MHz 161.650 to 163.275 MHz*โข Channel spacing : 25 kHzโข Frequency stability : ยฑ5 ppm โข Operating temperature : โ20หC to +55หC โ4หF to +131หFโข Antenna impedance : 50 รธโข Number of memory channels : 10 memory channels 200 group channels 10 history channels 10 GPS channels 10 weather channels*โข Mode : AM (6K00A3E)โข Power supply requirement : 13.80 V / 27.50 V DC (negative ground) โข Dimensions : 160 (W)โ34 (H)โ271 (D) mm
(projections not incl.) 65/16(W)โ111/32(H)โ1021/32(D) inโข Weight : approx 1.0 kg; 2.2 lb
*U.S.A. version only, receiving only.
D Transmitterโข Mode : AMโข Output power : 8 W (Carrier power)โข Spurious emissions : โ60 dBcโข Microphone impedance : 600 รธโข Modulation limiting : 70% (Max 98%)
D Receiverโข Receive system : Double conversion
superheterodyneโข Intermediate frequencies : 1st 38.85 MHz
2nd 450 kHzโข Sensitivity : (AM) Less than 2 ยตV (pd)
at 6 dB S/N (FM) Less than 1.4 ยตV
at 12 dB SINAD*โข Selectivity : 6 dB ยฑ3 kHz 60 dB ยฑ22 kHzโข Spurious response rejc. : More than 74 dBยต โข Audio output power : 5 W with a 4 รธ load (External
speaker) 60 mW with a 500 รธ load
(Headphone)
Measurements made in accordance with RTCA DO-186B for U.S.A. version. All stated specifications are subject to change without notice or obligation.
31
9OPTIONS
D CS-A210 cloning softwareProvides quick and easy programming of items, including private channels, scan settings, etc., via a Windowsยฎ PC to the transceiver (Microsoftยฎ Windowsยฎ 2000/Me/XP/Windows Vistaยฎ).
D OPC-1529R cloning cable This cloning cable provides convenient connection to a PC to access programmable features, such as memory chan-nels, memory name, etc.
D MB-53 mounting bracketFor mounting the transceiver to a vehicle. The external speaker and microphone are included.
D PS-80 power supplyProvides convenient operation of the transceiver on the ground. A built-in speaker and microphone* are included.*Depending on version.
NOTE: PS-80โs specifications Dimensions : 200 (W) ร 200 (H) ร 300 (D) mm
7.9 (W) ร 7.9 (H) ร 11.8 (D) in Outputs : 13.8 V DC / 6 A
D MB-113 rear panel adapterFor the 3rd party compatible type with rear panel adapter.Ask your dealer for compatible panel mount radio details.NOTE: Supplied with some transceiverโs versions.
08
09
Approved Icom optional equipment is designed for optimal performance when used with an Icom transceiver.Icom is not responsible for the destruction or damage to an Icom transceiver in the event the Icom transceiver is used with equipment that is not manufactured or approved by Icom.
32
INDEX
AAccessing 121.5 MHz emergency frequency ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 19AM squelch level ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 24Automatic noise limiter ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 23
BBasic operation ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 5Beep tone level ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 27Blank channel ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 9
CChannel selection ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 10Channel tag list ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 16Clearing the memory contents ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 14Cloning ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 29
DData cloning ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 29Dimmer brightness (High)ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 25Dimmer brightness (Low) ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 25Dimmer brightness (Manually) ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 26Dimmer mode ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 25Dimmer response ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 26Direct frequency selection ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 5Direct frequency setting mode operation ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 8Displayed message ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 29DualWatch interval ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 24DualWatch operation ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 8
EEmergency frequency ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 19Entering memory mode ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 9External input ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 26External input level ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 27
FFM squelch level ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 24
Frequency display ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 26Frequency exchanging ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 6Frequency selectionยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 5Frequency setting example ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 7Front panelยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 1Function display ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 4
GGeneral frequency selection ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 5GPS memory ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 17GPS memory channel ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 9GPS memory edit ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 18Group memory channel ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 9, 13Group memory channel display ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 24
HHeadphone level ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 23History memory channel ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 9, 14
IInstallation and removal ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 28Intercom function ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 20Intercom usable setting ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 27Intercom1 Microphone audio input level ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 23Intercom1 squelch level ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 23Intercom2 Microphone audio input level ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 23Intercom2 squelch level ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 23Interlock ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 27
LLock function ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 19Lock mode ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 24
MMemory channel type ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 9Memory clear ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 27Memory mode menu ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 12
33
INDEX
Memory operation ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 9Memory protect function ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 9Memory protection ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 18, 24Menu mode items ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 23Menu mode programming ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 22Microphone1 gain ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 24Microphone2 gain ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 25
OOperating menu mode ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 22Other functions ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 19
PPanel descriptions ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 1Priority watch interval ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 24Programming channel names ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 15Programming channel tag ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 16Programming example ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 11Programming group names ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 15Programming notes ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 9Programming a memory channel ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 10
RRegular memory channel ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 9, 13
SSafety training information ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 35Sidetone level ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 25Squelch test function ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 20Standby frequency selection ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 5
TTime-Out-Timer ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 27Transceiver installation ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 28Transceiver removal ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 28Transferring memory contents ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 12Transmitting ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 6
Transmitting microphone selection ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 25
UUSER-1 setting ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 26USER-2 setting ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 26
WWeather memory channel ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 9, 17Weather memory channel scan ยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยทยท 21
34
M E M O
35
10SAFETY TRAINING INFORMATION
Your Icom radio generates RF electromag-netic energy during transmit mode. This radio is designed for and classified as โOc-cupational Use Onlyโ, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the โGen-eral Populationโ in an uncontrolled environ-ment.
โข For compliance with FCC and Industry Canada RF Expo-sure Requirements, the transmitter antenna installation shall comply with the following two conditions:
1. The transmitter antenna gain shall not exceed 0 dBi.
2. The antenna is required to be located outside of a ve-hicle and kept at a distance of 36 centimeters or more between the transmitting antenna of this device and any persons during operation. For a small vehicle, the antenna as worst case, the antenna shall be located on the roof top at any place on the centre line along the vehicle in order to achieve 36 centimeters separation distance. In order to ensure this distance is met, the installation of the antenna must be mounted at least 36 centimeters away from the nearest edge of the vehicle in order to protect against exposure to bystanders.
To ensure that your exposure to RF elec-tromagnetic energy is within the FCC allowable limits for occupational use, al-ways adhere to the following guidelines:
โข DO NOT operate the radio without a proper antenna at-tached, as this may damage the radio and may also cause you to exceed FCC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio.
โข DO NOT transmit for more than 50% of total radio use time (โ50% duty cycleโ). Transmitting more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded. The radio is transmitting when the โTX indica-torโ appears. You can cause the radio to transmit by press-ing the โPTTโ switch.
Electromagnetic Interference/CompatibilityDuring transmissions, your Icom radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic ra-diation such as hospitals, aircraft, and blasting sites.
10
A-6602H-1EX-tPrinted in Japanยฉ 2007โ2010 Icom Inc.
Printed on recycled paper with soy ink. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan