Date post: | 11-Jan-2016 |
Category: |
Documents |
Upload: | james-holt |
View: | 218 times |
Download: | 0 times |
ICC Features
FeaturesFeatures
• Supporting unlimited projects per ICC– Advanced technical support
• Friendly registration utility• 5 password-levels• exceptional workspace (features and look)
– Fix - Automatic site graphic display
– User - SDACA-like, create your own flexible displays
• Server/Client installation– Operates over any Windows-supported network
ICC Features
FeaturesFeatures
• Advanced interrogation concept• Multi lingual
– Switch language on the fly
• Creating and printing database reports of all tables• Upload Field Unit data (wizard) from the field into
the ICC program• Define your own image per I/O to be displayed in
the graphic section• Sensors program• Line display and definitions• I/O table for each Field Unit
ICC - Registration
One station, network, demoOne station, network, demo
Registration Key
Demo Only.All features may be used without communication
you are hereafter typing the
correct key
ICC - Order Of Work
Follow this order to simplify data entry processFollow this order to simplify data entry process
• File/Projects– Open/Create Project
• System– System definitions
• System– Areas Definitions
• System– Field Units Definitions
• System– I/O Definitions
ICC - Order Of Work
Follow this order to simplify data entry processFollow this order to simplify data entry process
• System– Main Lines definitions
• General, Irrigation, Fert Parameters
• Filter flushing batteries and then filter parameters
• System– View all I/Os in the I/O table
• System– Define crop types and attach Main-Line to crop
ICC - Password Levels
Manager always knows who logged in and whenManager always knows who logged in and when
• 5 Levels of password– Level 1 - Motorola (changes in ICC SW)
– Level 2 - Technician (all changes but Motorola’s)
– Level 3 - Manager (all but expert Com. Parameters)
– Level 4 - Area Manager (no setup changes, may be limited to certain areas)
– Level 5 - Viewer only (still must login)
ICC - Project Definition
Work with projects to backup, service and supportWork with projects to backup, service and support
List ofProjects
Open aProject
Unlimited Number of ProjectsUnlimited Number of Projects
ICC - IRRInet Control Center Workspace
DisplayArea
Logging events
ExplorerTree
Windows workspaceWindows workspace
ICC - System Definition
Defining system and communication parametersDefining system and communication parameters
Save Changes
Undo Changes
Print a Report
Exit Table
ICC - Area Definition
Each area has its own image. Create an area reportEach area has its own image. Create an area report
Add to the list
Delete from list
ICC - Field Unit (FU) Definition
Wizard utility to retrieve Field Unit Information and data to the centerWizard utility to retrieve Field Unit Information and data to the center
List of FU
Wizard upload FU data
FU DTMF #
ICC - Field Unit Definition
FU or area sorting
Impactparameters
Create and printa report with all
FU data
ICC - Field Unit Definition
How to define interrogations ?How to define interrogations ?
View all FUsor
FU per area
Default interrogationor
create your schedulerper FU
Irrigation programs, line status and I/Os Irrigation programs, line status and I/Os interrogationinterrogation
Use differentinterrogation rate
when object is displayedon screen
ICC - Field Unit Definition
Define or Upload Field Unit’s Modules StructureDefine or Upload Field Unit’s Modules Structure
Defineor
uploadmodulesstructure
ICC - I/O Definitions
Create your own image for any I/O to be displayed in the graphic sectionCreate your own image for any I/O to be displayed in the graphic section
User-definedimage representing
I/O in the graphicsectionList of all
the I/Osin the project
Select your I/O list view
Select imageand other parametersfrom a predefined list
orcreate your own
I/O types
ICC - I/O Definitions
View all I/Os parameters and current statusView all I/Os parameters and current status
Use defaultsample rate
orcreate specific
scheduleper I/O
Click on the tabto sort
Select “Record”for history
file
ICC - I/O Definitions
ICC prompts to avoid mistakes in physical connectionsICC prompts to avoid mistakes in physical connections
Connect tolocal I/O
orremote
(Scorpio/Impact)
Different colorsto avoid mistakes
in physicalconnections
Click for moreparameters
ICC - I/O Definitions
Fill-in all relevant date to benefit from all ICC featuresFill-in all relevant date to benefit from all ICC features
Additional dataper
I/O type
Actualand
calculatedaccumulation
Data ofdigital output
(valve)
ICC - I/O Definitions
Fill-in all relevant date to benefit from all ICC featuresFill-in all relevant date to benefit from all ICC features
Data forcounter
(Water & Fert Meter)
ICC - I/O Definitions
Fill-in all relevant date to benefit from all ICC featuresFill-in all relevant date to benefit from all ICC features
Data fordigital input
(alarm, pressure etc.)
ICC - I/O Definitions
Fill-in all relevant date to benefit from all ICC featuresFill-in all relevant date to benefit from all ICC features
Sensorpreferences
Actual ICCview
Below normal0-2 Bar
Over normal8-10 Bar
Normal 3-7 Bar
ICC - I/O Definitions
Create virtual water meter, then create virtual lineCreate virtual water meter, then create virtual line
Metersin stock
In meters
Out meters
ICC - I/O Definitions
““500”, “600”, and “900” Conditions are also I/Os you need to define500”, “600”, and “900” Conditions are also I/Os you need to define
“900” Conditiondefinitions
ICC - Main Lines Definitions
Display system, area, type or one Field Unit Main LinesDisplay system, area, type or one Field Unit Main Lines
General Main Linedata
Per line:StartStop
Clear alarm
Go totable
Select your view of the Main Line
ICC - Main Lines Definitions
Drag and Drop stations from stock to be: irrigation zones, main valve or fert pumpDrag and Drop stations from stock to be: irrigation zones, main valve or fert pump
ICC - Main Lines Definitions
Water / Run-Time parametersWater / Run-Time parameters
ICC - Main Lines Definitions
Fert parametersFert parameters
ICC - Main Lines Definitions
Define filter batteries before defining filter parametersDefine filter batteries before defining filter parameters
Select filtersout of the
free valvesor
stations belong tothat Main Line
ICC - Main Lines Definitions
Filter parametersFilter parameters
ICC - Main Lines Definitions
For each Field Unit - list of all defined I/Os. Make changes in this tableFor each Field Unit - list of all defined I/Os. Make changes in this table
ICC - Main Lines Definitions
For each Field Unit - view water and fert accumulationsFor each Field Unit - view water and fert accumulations
ICC - Crop Types Definitions
Each Main line may be attached to Crop TypeEach Main line may be attached to Crop Type
Change run-timefactor
per crop type
ICC - Fix Screens
Created automatically according to your definitionsCreated automatically according to your definitions
Explorer-like tree
Your selectionon the tree
is displayed here
Click on Area to view Field UnitsClick on Area to view Field UnitsClick on Field Unit to view I/OsClick on Field Unit to view I/Os
ICC - Fix Screens
Use the right mouse button to view more info and go to other tablesUse the right mouse button to view more info and go to other tables
Created automatically
ICC - User’s Screen - Creating New
Enter the EDIT mode and create a new screenEnter the EDIT mode and create a new screen
Edit button
Use theright mouse buttonto place and create
a new screen
Enter name
Description
Icon
Backgroundcolor
Backgroundpicture
ICC - User’s Screen - Adding Elements
You may place the toolbar, anywhere on the workspaceYou may place the toolbar, anywhere on the workspace
After defining:After defining:Screen name, Description (option), Icon (option), Background Color (option), Background Picture (option)Screen name, Description (option), Icon (option), Background Color (option), Background Picture (option)You may add elements and objects to that screenYou may add elements and objects to that screen
Pointing
Text Labels
Add Picture
Pictures are like Pictures are like “clipart”“clipart”
Add Button
Create ButtonsCreate Buttonsto cruseto crusebetween screens between screens
Add Element
Element:Element:OutputOutputInputInputSensor….Sensor….
Add Object
Object:Object:AreaAreaField UnitField UnitMain Line...Main Line...
Lock lastSelection
ICC - User’s Screen - Adding Elements/labels
Select an item and using the mouse place it anywhere on the display areaSelect an item and using the mouse place it anywhere on the display area
Select Font
Select label.Select label.place the mouseplace the mouseon the display area.on the display area.Click the mouse.Click the mouse.
Font Color
Font Background
OpaqueTransparent
Edit label textEdit label textand hit “Enter”and hit “Enter”
Change labelChange labelpropertiesproperties
ICC - User’s Screen - Adding Elements/Pictures
Select an item and with the mouse place it anywhere on the display areaSelect an item and with the mouse place it anywhere on the display area
1. Select Picture
2. Exploreyour PCto findthe requiredpicture
After After selectingselectingpicture,picture,place the place the mouse on the mouse on the display areadisplay areaand click.and click.
3. Save yourselection,and exit
4. You maychangeproperties:Opaque/Transparentof the whitepicture’sbackgroundcolor
3. Drag the pictureto the requiredposition and resize it
ICC - User’s Screen - Adding Elements/Button
Select an item and using the mouse place it anywhere on the display areaSelect an item and using the mouse place it anywhere on the display area
1. Select Button
After selecting Button,After selecting Button,place the mouse on the place the mouse on the display area and click,display area and click,to create a Button.to create a Button.
2. Select Button,click the right mousebutton and select“EDIT”, tomodify Buttonproperties.
3. Modify properties:• Text on Button• Icon On Button• Screen to move when click on
4. You may changethe button’s textproperties.
ICC - User’s Screen - Adding Elements/I/O’s
Select an item and using the mouse, place it anywhere on the display areaSelect an item and using the mouse, place it anywhere on the display area
1. Select Element
After selecting Add Element, place the mouse on theAfter selecting Add Element, place the mouse on thedisplay area and click..display area and click..The table of all I/O’s will appear.The table of all I/O’s will appear.
2. Select Field Unit
2. Select I/O type
3. Select specific I/O
4. Click [+] and exit
5. The selected I/O will appearon the display area.
You may change theYou may change theI/O’s text properties.I/O’s text properties.