ICRAES program 2018 version1journal.esrgroups.org/jes/icraes/ICRAES_program_2018_version1.pdf ·...

Hammamet – Tunisia, Dec.23 – Dec.25, 2018 7

Organized by Contributors

Conference

Program

ICRAES’18, Hammamet, Tunisia Dec. 23 – Dec. 25, 2018

1

3rd International Conference on Recent

Advances in Electrical Systems

(ICRAES’18)

http://journal.esrgroups.org/jes/icraes

Dec. 23 – Dec. 25, 2018

Mehari Hotel 5*

Yasmine Hammamet

Hammamet - Tunisia

Program of the 3rd International Conference on Recent Advances in Electrical Systems (ICRAES’18)

2


3

WELCOME

Dear Participants

It is our honour and pleasure to welcome you to the 3rd International Conference on Recent

Advances in Electrical Systems (ICRAES’18).

The conference takes place at Mehari Hotel 5*, Yasmine Hammamet, Hammamet, Tunisia for

three days starting from Dec. 23, 2018. The technical program involves one Invited Keynote, two

poster sessions and nine oral sessions. This booklet is intended to guide you throughout the

conference. You can find lots of useful information including contents of the technical sessions,

presentation times and places. Members of the conference committee will also be at your disposal to

help you. Being a part of this major event has been a memorable and rewarding experience for us.

We hope all the participants will find the conference enjoyable and informative.

General Chair

Prof. Dr. Tarek BOUKTIR


4

General Chairmen Professor Dr. Tarek BOUKTIR (University Ferhat Abbas Sétif 1, Algeria)

Professor Dr. Rafik NEJI (ENIS, Sfax, Tunisia)

Organization Chairs Ass. Prof. Linda SLIMANI (University Ferhat Abbas Sétif 1, Algeria)

Prof. Moez GHARIANI (ENET’Com, Sfax, Tunisia)

International Steering Committee Chair

Prof. Dr. M.E.H. BENBOUZID (France)

Members of Organization Committee

Raida SELLAMI (Tunisia)

Abdessalem MEHENNI (Algeria)

International Steering Committee Members

Prof. Ali Feliachi (USA); Prof. Tahar Bahi (Algeria); Prof. Omrane Bouketir (Algeria); Prof.

Achour Betka (Algeria); Prof. Tahir Cetin Akinci (Turkey); Prof. I. Musirin (Malaysia); Prof.

Lassaad SBITA (Tunisia); Prof. Selim Koroglu (Turkey); Prof. Jan Latal (Czech Republic); Prof.

Tole Sutikno (Indonesia); Prof. Moez Ghariani (Tunisia); Prof. Hsan Hadj Abdallah (Tunisia); Prof.

K. Srairi (Algeria); Prof. K. Barra (Algeria); Prof. N. Golea (Algeria); Prof. M. Pucci (Italy); Prof.

R. Neji (Tunisia); Prof. T. Bouktir (Algeria); Prof. I. Boumhidi (Morocco); Prof. Federico Milano

(Irland); Prof. Diego Bellan (Italy); Prof. Hazlie Mokhlis (Malaysia); Prof. Khalid Mohd. Nor

(Malaysia); Prof. Asim Kaygusuz (Turkey); Prof. Mohd. Wazir Mustaffa (Malaysia); Prof. Omar H.

Abdalla (Egypt); Prof. Linda Slimani (Algeria); Prof. Mohamed Boudour (Algeria); Prof. Saad

Mekhilef (Malaysia); Prof. Salah Chenikher (Algeria); Prof. Bouziane Boussahoua (Algeria); Prof.

Salim Haddad (Algeria); Prof. Samir Ladaci (Algeria); Prof. Badre Boussoufi (Morocco); Prof.

Akash Saxena (India); Prof. Ilhem Slama-Belkhodja (Tunisia); Prof. Mohamed Najeh Lakhoua

(Tunisia); Prof. Ahmed Salhi (Algeria); Prof. Gokhan Erdemir (Turkey); Prof. Kaddour Arzag

(Algeria).


5

INFORMATION FOR SESSION CHAIRS, ORAL PRESENTERS, AND POSTER PRESENTERS

SESSION CHAIRS

Session chairs are listed by name on each session in the technical program. Please check to see if

you are a session chair, and if so, please identify the session(s) you are scheduled to chair. If you

have a conflict with another presentation or event you must attend and cannot fulfil your duties as

session chair, please ensure that another person will be present to assume those responsibilities. It is

important that session chairs maintain the schedule as indicated in the technical program to allow the

participants to see the papers that they want to see at the time they want to see them. If you are a

session chair, please do your best in the following areas:

1. Come to the room for your session early and if possible identify each of the speakers before the

session begins.

2. Provide each speaker with 10 minutes of presentation time and 5 minutes to allow for questioning

and transitioning to the next speaker.

3. Do not allow speakers to extend over their time slot, nor allow questions to extend into the next

speaker’s time. If there are additional questions, these can be handled during a break between

sessions. Use your best judgment to balance the need to be fair to the presenter’s time and to the

participants’ time.

4. In the case of paper for which no author or surrogate is available to present (“no show”), please

either use the time for an open discussion of previous paper or questions, or break for 10 minutes

and then reconvene. Although significant effort has been made to reduce the number of no-shows, it

is always possible that some will occur.

ORAL PRESENTERS

You’ll find your presentation time(s) in the technical program in this booklet. Please locate your

times and places and ensure that you know where to go and when to be there. Please ensure that you

show up early for your oral presentation and identify yourself to the session chair. Please also ensure

that you are as prepared as possible to make your presentation when it is your time. Do not go over

10 minutes for your presentation, allowing for 5 minutes of questions and transitioning to the next

speaker. Follow the instructions of the session chair. In the event that a session chair does not show

for a session, the last speaker should serve as session chair. In the event that this is not possible,

please identify a volunteer in the audience to serve as session chair, or at a minimum identify

someone for each speaker to ensure that each presentation stays within the allotted time.


6

POSTER PRESENTERS

The poster sessions are scheduled in the Poster Hall. There are no other technical presentations

scheduled during these times. Poster boards are already prepared, and you will be able to start

assembling your poster presentations during the coffee breaks. Each poster board will have a

number pinned to it. To find the number that corresponds to your poster, please go to the poster

paper index in this book. This is also printed next to the paper entry in the main program.

COFFEE AND REFRESHMENT BREAKS

Coffee and refresh will be available for the break each day at 10:00-10:30 and 15:30-16.00 at the

poster Hall.

SOFT COPIES OF THE PROCEEDINGS

Each registrant receives a soft copy (CDROM) of the ICRAES’18 edited proceedings with

following ISBN: 978-9938-9937-1-4.

IF YOU HAVE A PROBLEM FOR any conference-related problem, please contact any

organization committee member, the general chairs or the registration desk.


7

CONFERENCE SCHEDULE

Time December 23rd December 24th December 25th

8.00-

8.30

Registration

Location: Poster Hall

Registration


8.30-

9.00

Opening Ceremony

(Conference Room)

Oral Sessions 3

(Rooms A,B,C) 9.00-

10.00

Keynote Speaker 1

Prof. Dr. Ahmed RUBAAI,

Fellow IEEE, HOWARD

University Washington, DC,

USA

(Conference Room)

10.00-

10.30 Coffee Break Coffee Break

10.30-

11.30 Oral Sessions 1

(Rooms A,B,C)

Poster Session 2


11.30-

12.00

Closing Ceremony

(Conference Room)

12.00-

14.00 Lunch Lunch

14.00-

15.30

Reg

istration

Oral Sessions 2

(Rooms A,B,C)

15.30-

16.00 Coffee Break

16.00-

16.30

Poster Session 1


19.00-

21.00 Dinner Dinner

Conference Room: Sidi Bou Said

Room A: Kairouan

Room B: Sousse Room C: Sidi Bou Said


8

SUNDAY, DEC 23, 2018

14:00 – 17:30 Registration


MONDAY, Dec 24, 2018



8:30-9:00: OPENING CEREMONY Location: Room Sidi Bou Saïd

9:00 – 10:00

Keynote Speaker

Prof. Ahmed RUBAAI, Fellow IEEE Professor and Chairperson

Electrical Engineering and Computer Science Howard University, Washington, DC, USA

Location: Room Sidi Bou Said

Chair: Prof. Dr. Tarek BOUKTIR

Keynote Title: Computational Intelligence Technique-Based Development and Control of

Electric Motor Drives for Motion Control Industry

ABSTRACT

A self-learning fuzzy-neural-network PI-and PD-type control design is offered to replace the

industrial PID controller, adds a self-learning capability to the initial fuzzy design for operational

adaptively, and implements the solution on real hardware using an industrial test-bed system. At

first the proposed solution is to use fuzzy logic-based decision structures to mimic the PI and PD

elements of a PID controller in parallel. The fuzzy decision engines seek to improve response by

executing custom actions per the combinations of fuzzy sets of the input parameters to the logic.

Operational knowledge of the physical meaning of the fuzzy input set combinations and the

necessary control response form the basis for the fuzzy rules design. Then, a fuzzy-neural-network


9

(FNN) structure that mimics fuzzy logic replaces the fuzzy logic in the control design and allows for

the capability for adaptive self-tuning of the weights and memberships of the input parameters. This

leads to selection of a learning algorithm for training the networks. The design implements

the novel use of the extended Kalman filter (EKF) to train FNN structures as part of the PI-/PD-like

fuzzy design. The presence of adaptive control via the EKF learning of the FNN control laws marks

an improvement over the FL design. The benefits of the adaptive control providing access to the

fuzzy rules online and the proper execution of the updates are improved control law maintenance

operations.

A dSPACE digital signal processor (DSP)-based data acquisition and control (DAC) system is

chosen as the main interface between the controlled system (process) and the host computer. The

software associated with the dSPACE DSP-board consists of the following:

• MATLAB/Simulink, a Window based analysis environment from the MathWorks.

• A Real Time Workshop (RTW) Window interface between the MATLAB/Simulink

environment and the dSPACE DSP-board

A test bench enables design implementation in the laboratory on hardware using a dSPACE DS1104

DSP and MATLAB/Simulink environment. Experimental testing results show that the proposed

controller learns and robustly responds to a wide range of operating conditions in real time. The

motor drive over time is subject to experience degradation of mechanical parts or even electrical

characteristics, and the ability to automatically adapt the control laws to these changes is a feature

that a non-adaptive fuzzy controller does not have.

SHORT CV

Ahmed RUBAAI, received the M.S.E.E degree from Case

Western Reserve University, Cleveland, OH, and the Dr. Eng.

degree from Cleveland State University, Cleveland, OH, in

1983 and 1988, respectively. In 1988, he joined Howard

University, Washington, DC, as a faculty member, where he is

presently a Professor and Chairperson of the Electrical

Engineering and Computer Science Department. Dr. RUBAII

has been named an IEEE Fellow in 2015. As an Educator, Dr.

RUBAII has been an acknowledged educator and leader of

curriculum development at Howard University for more than

two decades. He is the Founder and Lead Developer of Motion

Control and Drives Laboratory (http://www.controllab.howard.edu) that provides engineering students

with valuable hands-on and "real-world" experiences.” In recognition of his scholarly work and

dedication to the improvement of engineering education, his work is recognized by the larger

community of engineering educators, as verified by his receipt of the 2011 ASEE Robert G. Quinn

Award and the Distinguished Educator Award of the Middle-Atlantic Section of the American

Society for Engineering Education. This recognition is a clear demonstration and confirmation of his

peers’ high regard for his contributions to engineering education.

As a researcher, Dr. RUBAII has made significant contributions to the development and control of

electric motor drives for industrial system applications in a variety of roles including: scientist,

research engineer, university professor, and as IEEE volunteer and leader. The large majority of


10

these contributions are heavily oriented towards industrial applications that IEEE serves. Of

particular importance is his development of control technologies by way of intelligence; laying the

technological foundations for the production versions of high performance drives used in an

expansive array of industrial, commercial, and transportation applications today. His work covers a

broad range of manufacturing and product applications and exemplifies his ability to bridge between

academic research and the application to industrial applications. The bridges that Dr. RUBAII has

built between industry and academia represent a uniquely valuable contribution that can be matched

by very few others in the academic world today.

10:00-10:30 Coffee Break Location: Poster Hall


11


10:30-11:45: Oral Sessions 1

Location: Rooms A, B & C

Location: Room A: Kairouan Topic "Power Systems and Power Electronics"

Chairs: Prof. Tarek BOUKTIR & Dr. Mouloud AYAD

10.30-10.45

5

Bechouat Mohcene, Sedraoui Moussa, Feraga Chams-Eddine and Kahla Sami,

Faculté des Sciences et Technologie Université de

Ghardaia. Noumirat BP 455, route Ouargla

Ghardaia 47000

Traditional MPPT Algorithms Applied to

Different Models of Photovoltaic System

10.45-11.00

68

Mariem Tayari, Lema Gharsellaoui, Moez Ghariani and Abdessettar Guermazi

Enet'Com, University of Sfax, Tunisia

Active Power Filtering application for an electric

grid connected to a conversion wind system

11.00-11.15

13

Fouad Zaro, Odai Abbadi and Ahmad Abu Arrah

Electrical Engineering Department

Palestine Polytechnic University Hebron,

Palestine

Modeling a Grid Connected VSC for Improving the

Power Quality

11.15-11.30

45 Wasma Hanini, Moez Ayadi and Moez Ghariani

Enet'Com, University of Sfax, Tunisia

Efficiency improving of a static converter using a

cooling system for semiconductors

11.30-11.45

72

Raida Sellami, Rafik Neji and Tarek Bouktir University of Sfax, National School of Engineers of

Sfax, Tunisia

University Ferhat Abbas Sétif1, Algeria

Performance Improvement of Radial Distribution Network Following an

Optimal Reconfiguration and Integration of

Distributed Generation


12




Location: Room B: Sousse Topic "Control Systems Engineering and Automation"

Chairs: Prof. Chokri REKIK, Prof. Tahar BAHI

10.30-10.45

7

Toufik Amieur, Moussa Sedraoui and Chams-Eddine Feraga

Department of Electrical Engineering,

University of Kasdi Merbah, Ouargla,

Algeria’

Robust Fractional PID Controller with Fractional Weights Selection for Pneumatic Manipulator Using

Fminimax Optimization Technique

10.45-11.00

11

Faten Gouadria, L. Sbita

A Research Unit of Photovoltaic Wind

and Geothermal Systems National

Engineering School of Gabes,

University of Gabes

New Control Strategies for Greenhouse Ventilation Systems

11.00-11.15

15

Abdullah Al-Manfi

College of Electrical and Electronics

Technology-Benghazi

Benghazi, Libya

Implementation of Remote Self-Tuning Fuzzy PID Controller for

Induction Motor Through Ethernet

11.15-11.30

21

Sonia Hammami

University of Tunis El Manar

El Manar Preparatory Institute for

Engineering Studies, BP 244, Tunis 2092,

Tunisia

Vector norms approach and aggregation techniques to synchronize

discrete-time hyperchaotic maps


13




Location: Room C: Sidi Bou Said Topic "Electrical Machines and Drives "

Chairs: Prof. Ahmed RUBAII & Prof. Rafik NEJI

10.30-10.45

28

Mohamed Ali Zdiri, Badii Bouzidi and Hsan Hadj Abdallah

CEM Laboratory, National Engineering

School of Sfax, Tunisia

Open-circuit fault diagnosis in four-switch three-phase inverter fed

induction motor drive

10.45-11.00

41

Zaaraoui Lassaad and Mansouri Ali

CES Laboratory, Engineering School of

Sfax, University of Sfax

Design improvement of an in-Wheel machine for electric vehicle based on

multiobjective algorithms

11.00-11.15

44

Naila Ben Halima, Naourez Ben Hadj, Rihab Abdelmoula, Mohamed Chaieb

and Rafik Neji

University of Sfax, National School of

Engineers of Sfax, Tunisia

Sizing and Determination of Fuel Consumption and Gas Emissions in a

Series Hybrid Electric Vehicle

10.45-11.00

9

Mohamed Yaich and Moez Ghariani

Laboratory of Electronic Systems &

Sustainable

Energy (ESSE), Intelligent Transport

Systems &

Mobility Technology Group,


Engineers-

B.P 1173, 3038 Sfax, Tunisia

Intelligent Approach for Speed's Tracking In a Recreational Electrical

vehicle

12:00: LUNCH


14




Location: Room A: Kairouan Topic " Control Systems Engineering and Automation "

Chairs: Prof. Chokri REKIK, Prof. Tahar BAHI

14.00-14.15

29

Soltana Guesmi, Kais Jamoussi, Moez Ghariani and Larbi Chrifi-

Alaoui

Laboratory of Electronic Systems

& Sustainable Energy (ESSE),

National Engineering School of

Sfax, 3038 Sfax, Tunisa

Experimental validation of the robustness of super-twisting control for Induction

motor of Electric vehicle

14.15-14.30

34

Kamel Jemaï, Amna Elghoul and Lassaad Sbita

Wind and Geothermal Systems,

Research Unit of photovoltaic,

National Engineering School of

Gabes, University of Gabes, Tunisia

Fuzzy Control of a Power System Under Random Disturbances

14.30-14.45

36

Rtibi Waad, M'Barki Lotfi, Ayedi Moez and Ghariani Moez

Laboratory of Electronic Systems

& Sustainable Energy (ESSE),

University of Sfax, Tunisia

A comparative study of different multi-level inverters applied to the electric

vehicle system

14.45-15.00

60

Jihen Loukil, Ferdaous Masmoudi and Nabil Derbel

University of Sfax, Sfax Engineering

School, Sfax, Tunisia

Control & Energy Management

Laboratory (CEMLab), Digital

Research Center of Sfax (CRNS)

Tunisia

Elman Neural Network Control Strategy For a Photovoltaic System


15




Location: Room B: Sousse Topic "Smart Grid and Renewable Energy"

Chairs: Prof. Tarek Bouktir & Prof. Rafik NEJI

14.00-14.15

43

Dorra Abdeljalil, Mohamed Chaieb, Naourez Ben Hadj, Rafik Neji and Tarek

Bouktir

National School of Engineers of Sfax, Tunisia

University Ferhat Abbas Sétif1, Algeria

Comparison of different types of generators in wind turbines

14.15-14.30

48

Souhir Sallem, Salma Keskes and Mohamed Ben Ali Kamoun


Analysis and enhancement of unbalanced standalone DFIG

based WECS

14.30-14.45

55

Farhat Boukhili, Dami Mohamed Ali, Zaafouri Abderrahmen and Bahi Tahar

ISET, Jendouba, Tunisia

ENSIT, LISIER Laboratory,Tunis, Tunisia

Control of DFIG based wind turbine Connected to Grid

14.45-15.00

57

Lema Gharsellaoui and Moez Ghariani

Laboratory of the Advanced Electronic Systems

and the durable Energy ESSE, University of

Sfax, Tunisia

Starting of a wind system in isolated mode


16




Location: Room C: Sidi Bou Said Topic "Signal, Antenna, Microwave, Image Processing, Telecommunication, and Multimedia"

Chairs: Dr. Kaddour ARZAG & Dr. Mouloud AYAD

14.00-14.15

4

Kamel Ghanem Ghalem and Fatiha Hendel

Université des Sciences et de la Technologie d’Oran

Mohamed Boudiaf, USTO-MB, BP 1505, EL

M’Naouer, Algeria

How to extract the discriminant information

from eyes of an individual?

14.15-14.30

8

Ines Frigui, Mohamed Salah Karoui, Hamadi Gharinai and Mongi Lahiani

LETI Laboratory, MEEM Team, National School of

Engineering of Sfax, Tunisia

Design of a Miniaturized Meandered Dipole

Antenna with Defected Ground Structure for

Passive UHF RFID Tags

14.30-14.45

10

Mouloud Ayad, Mohamed Rezki, Mourad Benziane, Kamel Saoudi and Abderrazak Arabi

LPM3E Laboratory, Faculty of applied technology,

University of Bouira, Algeria

Fault diagnosis of rotating machines using Wavelet

Packets Packets Transform

14.45-15.00

18 Kaddour Arzag, Zin-Eddine Azzouz and Boualem

Ghemri Dept. of Electrotechnics, University of Saida, Algeria

Influence of the Ground Stratification on the

Electric Fields Waveforms Calculated by the 3D-

FDTD Method in the Case of Lightning Strikes to a

Tower Placed on a Mountain



17


16:00-16:30: Poster Session 1


Chairs: Prof. Ali SERIDI & Dr. Mouloud AYAD

50

Azzeddine Menasria, Abdelhak Bennia, Boualleg Abdelhalim and Moussa Sadraoui

LAIG laboratory Université 8 Mai 1945 Guelma,

Algeria

Recognition of Handwritten Arabic literal amounts Using Neural

Networks

51

Bourouba Hocine, Doghmane Hakim, Messaoudi Kamel and Bourennane El-Bay

PI: MIS Laboratory of Guelma University,

Algeria

Ear recognition using textural structure descriptor representation

52

Boualleg Abdelhalim, Deriche Mohamed, Bourouba Hocine, Sedraoui Moussa,

Doghmane Hakim and Menasria Azeddine

Laboratoire d’automatique et informatique de

Guelma (LAIG) Université 8 Mai 1945 Guelma,

BP 401 Guelma Algeria

Enhanced face recognition under varying conditions using a Weber-

Face combined with local phase quantization

54

Mohamed Benhaddad, Fouad Kerrour, Ounessa Benabbes and Abdeali Saouli

Laboratoire de Modélisation des dispositifs a

énergies renouvelables et nanométrique,

Université Frères Mentouri de Constantine1,

Constantine, Algeria

Analysis of Effective Mode Area and Nonlinear Characteristics of a

Photonic Crystal Fiber with Finite Element Method

56

Aicha Mallem and Omar Boudebbouz

Electrotechnic Department, Faculty of

Technology,University of August 20th, 1955 –

Skikda, Algeria

Economic-Emission Load Dispatch Using Particle Swarm Optimization

58

Amer Abdeslam Aimer, Fouad Kerrourand Khalifa Aguir

MoDERNa Laboratory, University Mentouri

brothers Constantine, Constantine, Algeria

Design and Optimization of Platinum Micro-Heaters for Gas Sensor

Applications

65 Henchiri Abdelhamid, Bahi Tahar and Lekhchine Salima

Performance analysis of a network connected photovoltaic system


18

20 August 1955-Skikda University, Laboratory of

Mechanical Engineering and Materials, Skikda,

Algeria

69

Hanene Hleli, Souhir Tounsi and Flah Aymen

National School of Electronics and

Telecommunications of Sfax, Sfax University, ESSE

Laboratory, Sfax, Tunisia

Modeling of the Variable Reluctance Synchronous Machines by finite

elements (two-phase model)

70

Ghania Harzallah and Amina Merzougui

Department of Petrochemical

August 20, 1955 University

Skikda, Algeria

Ultrat-Violet MSM photodetector based ZnO study and simulation

67

Kaouthar Melizi, Karim Sebaa and Abdelhalim Tlemçani

Department of Electrical Engineering

Medea University, Algeria

Power Loss Minimization and Optimal Placement of Distributed

Generation Units for Voltage Profile Improvement Using PSO Algorithm

62

Soraya Gouder, Ramdane Mahamdi, Luc Favre, Antoine Ronda and Isabelle Berbezier

Larbi Tébessi University

Tébessa, Algeria

Vibrational properties and luminescence of Ge layers grown on

porous silicon

26

Ali Seridi, Lynda Dib, Bourbia Riad and Yamina Bordjiba

Department of Computer

Science, Labstic Laboratory,

8 May 1945 University,

Guelma, Algeria

A Web Service-Based Tutoring Tool for eLearning Platform


19

TUESDAY, Dec 25, 2018




Location: Rooms A,B & C

Location: Room A: Kairouan Topic "Electrical Machines and Drives"

Chairs: Prof. Moez GHARIANI & Prof. Abdessattar GUERMAZI

8.30-8.45

46

Hela Kolsi, Mohamed Chaieb, Naourez Ben Hadj, Manel Krichen and Rafik Neji


Finite Element Studies on the Permanent Magnet Machine with and Without Inserted

Tooth- Electric Vehicles Application

8.45-9.00

47

Aziz Boukadoum, Tahar Bahi and Abla Bouguerne

LABGET laboratory, Department of Electrical

Engineering, University of Tebessa, Algeria

Fuzzy Logic Based Direct Matrix Converter Controlled Induction Motor Drive under

Distorted Input Voltage Conditions

9.00-9.15

63

Youssef Dhieb, Mohamed Yaich, Moez Ghariani and Abdessatar Guermazi

National School of Engineers of Sfax Laboratory of

advanced electronic system and sustaimble energy,

University of Sfax, 3038 Sfax, Tunisia

PID Parameter Optimization by using Ant Colony

Algorithm on FEM of Induction Motor

9.15-9.30

64

Hajer Mel, Ali Mansouri and Hafedh Trabelsi

CES laboratory

National Engineering School of Sfax

Sfax, Tunisia

Metaheuristic algorithms based-design optimization of a

permanent magnet motor

9.30-9.45

73

Abdelkrim Rechach, Djalel Dib, Sihem Ghoudelbourk and Zoubir Aoulmi

University Larbi Tebessi Tebessa, Algeria

Finite Element Magnetic Method, DTC and FLC

Regulation For 8/6 Switched Reluctance Motor used For

Electrical Vehicles


20




Location: Room B: Sousse Topic "Power Systems and Power Electronics"

Chairs: Prof. Tahar BAHI & Prof. Djelel DIB

8.30-8.45

32

Boudjella Houari, Ayad Ahmed Nour El Islam and Laouer Mohamed

Dept of Electrical Engineering

Kasdi Merbah University

30 000 Ouargla, Algeria

Improved Dynamic Harmony Search optimization for

Economic Dispatch problems with Cubic Cost Function

8.45-9.00

59

Rabeb Abid, Ferdaous Masmoudi and Nabil Derbel

Control & Energy Management Laboratory

(CEMLab), Digital Research Center of Sfax

(CRNS), Tunisia

Sliding mode control for step-up DC/DC Converters for Photovoltaic Applications

9.00-9.15

61

Hamed Belloumi, Aymen Ammouri and Ferid Kourda

Université de Tunis El Manar, Ecole Nationale

d'Ingénieurs de Tunis,

LR11ES15 Laboratoire de Systèmes Electriques,

1002, Tunis, Tunisia

Optimizing Design and Simulation of Planar

Transformers Based on Litz Wire Structure

9.15-9.30

66

Mohamed Rezki, Mouloud Ayad and Latifa Abed

Department of Electrical Engineering, ,Bouira

University, ALGERIA

Study of Thermal Distribution in Human Tissue across

Analytical Solution


21




Location: Room C: Sidi Bou Said Topic "Smart Grid and Renewable Energy"

Chairs: Prof. Tarek BOUKTIR & Prof. Chokri REKIK

8.30-8.45

6

Achwak Alazrag, Kamel Jemaï and Lassaad Sbita

Research Unit of photovoltaic Wind and

Geothermal Systems National Engineering

School of Gabes, University of Gabes

Control of Grid Connected Photovoltaic System

8.45-9.00

20

Mehenni Abdeslam, Zaia Alimazighi, Tarek Bouktir, Mohamed Ahmed-Nacer

Université Sciences Technologies

Houari Boumediene (USTHB)

Algiers, Algeria

Université Ferhat Abbas Sétif 1, Algeria

Faster Identification for Unplanned Outages from Huge

Unstructured Smart-Grid Messages taking Leveraging

UIMA-AS in Spark

9.00-9.15

25

Mohsen Ben Ammar, Majed Ben Ammar and Hsan Hadj Abdallah

CEM-Lab, University of Sfax, National

Engineering School of Sfax (ENIS), Sfax-

Tunisia

Contribution to the study and economic energy sizing of

photovoltaic systems

9.15-9.30

42

Imene Khenissi, Mohamed Amine Fakhfakh and Rafik Neji


Engineers of Sfax, Tunisia

Comparative study of three MPPT techniques for PV system



22


10:30-11:30: Poster Sessions 2


Chairs: Prof. Linda SLIMANI & Prof. Tahar BAHI

19

Mohamed Sélmene Ben Yahia, Hatem Allagui and Abdelkader Mami

LAPER,Tunis El Manar, Faculty of

Sciences of Tunisia

Electrochemical Impedance model of PEM Fuel Cell using EIS Spectrum Analyser

23

Yamina Bordjiba

Labstic Laboratory,

8 May 1945 Guelma University

A genetic algorithm for characteristic points matching of two different faces

24

Mounir Bekaik Laboratory of automatic and Signals Annaba

(LASA), Annaba, Algeria.

Robust control design for a class of nonlinear distributed time delay systems

35

Sofiane Mendaci, Ahcene Lemzadmi and Messaoud Boulouh

Universié 8 Mai 1945 Guelma,

LAIG Laboratory, Algeria

Optimal Design of Permanent Magnet Generator for Wind Turbine Application

31

Badreddine Boudjehem

Advanced Control Laboratory,

Department of Electrotechnics and

Automatic,

Université 8 Mai 1945 Guelma, BP 401,

Guelma

Optimal Tuning Method of decentralised Fractional PI Controller for TITO Process

using Diffusive Approach

33

Salima Lekhchine, Tahar Bahi and Abdelhamid Henchiri

20August 1955-Skikda University Skikda

21000, Algeria

DC-Bus Voltage Control of PWM rectifier and Performances Analysis

38

Linda djouablia and Mohamed Lashab

University 20 Aout 1955,

Skikda, Algeria

CRLH Resonator Loaded on Electromagnetic Sensor For Liquid

Mixture Application

39

Youssouf Bibi, Omar Bouhali and Tarek Bouktir

Mechatronics laboratory (LMT), University

Intelligent Petri Type 2 Fuzzy Direct Adaptive Control for Uncertain Nonlinear

Systems


23

of Mohamed Seddik Ben Yahia, Jijel, Algeria

74

Dib Djalel, Ghoudelbourk Sihem and Djeddi Abedlaghani

Department of electrical engineering,

University Larbi Tebessi of Tebessa, Algeria

2Department of electrotechnic,University

Badji Mokhtar of Annaba, Algeria

Contribution to the Power Quality Improvement by Statcom Device

75

Sihem Ghoudelbourk, Djalel Dib and Abdelkrim Rechach

University of Badji Mokhtar Annaba, Algeria

University Larbi Tebessi Tebessa, Algeria

Comparison between FLC and Fractional Order Controller for Switched Reluctance

Motor 8/6

49

Aziz Boukadoum & Abla Bouguerne


University of Tebessa, Algeria


University of Skikda, Algeria

Induction Motor Bearing fault diagnosis Based on Wavelet transform and Gaussian

Mixture Models

11:30-12:00: Closing Ceremony

Location Room: Sidi Bou Said

12:00: LUNCH


24

Journal of Electrical Systems

ISSN 1112-5209

http://journal.esrgroups.org/jes

JES is indexed by SCOPUS and ISI Thomson Reuters

Editor-in-Chief



University of Ferhat Abbas, Setif 1, Algeria

Email: [email protected]

Description

The journal publishes original papers of permanent reference value in all fields of electrical systems.

The coverage embraces: Power Electronics and Electric Drives; Photovoltaic conversion; generation

and network planning; optimal power flow; reliability; expert systems; neural networks; object

oriented systems; database and information systems; network theory, modelling and computation;

protection; distribution systems; energy economics; FACTS; electrical machines; Artificial

intelligence in power systems. As well as original research papers, the journal publishes short

contributions, book reviews and conference reports. All papers are blind peer-reviewed by at least

three referees. The journal has a policy of screening for plagiarism. The journal publishes 4 issues

per year with at least 15 papers per issue.

Journal of Electrical Systems has recently been indeed in the Emerging Sources Citation Index,

which is the New Edition of the Web of Science that was launched in November 2015. Beginning

with content published in 2015. This means that any articles published in the journal will be indexed

in the Web of Science at the time of publication.


25

Journal of Automation & Systems Engineering

ISSN 1112-8542

http://jase.esrgroups.org

JASE is indexed by EBSCO

Editor-in-Chief



University of Ferhat Abbas, Setif 1, Algeria

Email: [email protected]

Description

The journal publishes original papers of permanent reference value in all fields of automation and

Control systems. As well as original research papers, the journal publishes short contributions, book

reviews and conference reports. All papers are peer-reviewed by at least two referees. The journal

have a policy of screening for plagiarism. The journal publishes 4 issues per year with at least 10

papers per issue.

Articles published in JASE are subject to CC BY license. This license lets others distribute, remix,

tweak, and build upon your work, even commercially, as long as they credit you for the original

creation. Journal of Automation & Systems Engineering has recently been indeed in EBSCO. The

current volume is 11, 2018.


26

SEE YOU IN ICRAES’19


27

Date post:	22-Jul-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

ICRAES program 2018 version1journal.esrgroups.org/jes/icraes/ICRAES_program_2018_version1.pdf ·...

Documents