IFD Installation for GNS
Swap
IFD Models-Available via
Avidyne IFD
550\545-
GNS 530/530W
direct
replacement
Avidyne IFD 540-
GNS 530/530W
direct
replacement
Avidyne IFD 440-
GNS 430/430W
direct replacement
All IFD’s include Synthetic Vision, Wifi/Bluetooth, FLTA, and MK10 Keyboard included at no additional charge!
IFD Models Features
https://oasisnetworkusa.com/avidyne-support
ADS-B solutions extra charge
Foreflight and FltPlan are not included
IFD Models And Options
https://oasisnetworkusa.com/avidyne-support
IFD Models and Options• IFD100 App-IFD send all information to your IFD100 APP at no
charge-all connect to Foreflight and many more systems available
for IPAD only at the Apple ® Store
ALL IFD Models include Synthetic Vision
IFD Model Enablements-call for
options
• All IFD options can be enabled with a purchased software “unlock”
• Except Video (EVS) option which requires additional hardware
• Purchased unlocks will be associated with the aircraft tail number
• Options can be factory loaded when purchasing an IFD, but the
IFD must be ordered with the associated tail number
• Additionally, for cases where the tail number may be unknown
at the time of purchase, coupons may be ordered for the
options.
• Tail number will be required at the time the coupons are
redeemed
• Helicopter, 16W FMS, Radar Enablements can be field
installed-Video enablement is factory hardware installed
(order before shipping)
Radar Option with the RDR2000
IFD Models and Options
Oasis Aviation Network-Support
https://oasisnetworkusa.com/avidyne-support
1. Obtain List of Equipment Connected to GNS, antennas,
encoders, audio panel, traffic system, XM weather,
autopilot, etc.
2. Write down software versions of equipment connected to
GNS, configurations of GNS to transponders, traffic
system, XM weather, etc.
3. Call Oasis Aviation Network Tech support for step-by-step
guidance and install estimate based on info gathered
above
4. Log into Oasisnetworkusa.com and download installation
manual, pilot guide and RTS docs for IFD replacement
and sample 337.
5. Send IPAD IFD APP pilot training guide to customer
6. Order IFD online through the members page-shipped
directly to your shop
7. Use Coupon code AVPROMO1 to save another $300 on
all orders before July 31, 2020!
Installation Tips
The following slides have a few installation tips, please
consult Oasis Aviation Network Tech support if you have
any questions.
https://oasisnetworkusa.com/avidyne-support
You will find technical support, documents, F.A.Q.’s and
other resources for your installation.
Not an Oasis Aviation Network member? Contact
Membership at 404-309-0877
Compatible Traffic Systems
• Avidyne TAS6xx Series
• Avidyne Skytrax6xx-A Series (TAS-A)
• Bendix King KTA870/970 Series
• L3 Skywatch 497 and 899 Series
• Garmin GTS8xx Series
• Avidyne Skytrax 100B 978 UAT Receiver
• Freeflight RANGR FDL-978 UAT Receiver
• L-3 LYNX NGT9000/9000R
• Garmin GTX345, 335(TIS-A), 330(ES), and GDL88 (In Only)
IFD Installation Considerations
IFD Installation Considerations• Items that may require additional wiring
• IFD Aural Alerting
• FLTA (Forward Looking Terrain Alerting)
• TOD Chime (Top of descent)
• 500’ call out
• NOTE: Wiring is not necessary if the aircraft already has an
EGPWS or other ground proximity warning system that the owner
would like to continue using. FLTA must be disabled.
If the IFD is replacing a GNS unit that was previously TAWS
enabled, these wires are likely already present
ARS in the IFD550 must be calibrated
IFD Installation Considerations
IFD Installation Considerations• Items that may require additional wiring
• Standby Com Monitor
• Allows the Standby Com Frequency to be monitored in the
headsets when connected to a capable audio panel.
• N/A on IFD510/545/410
IFD Models and RADAR • RDR2000 Option on IFD5xx units
• RDR can display on 4xx units if IFD’s are cross-sync’d
IFD Installation Considerations
IFD Models and Options
IFD Installation Troubleshooting
Installation Troubleshooting• IFD5xx/4xx
• Mx Mode in 10.2.0 and later
• ARINC429 and RS-232 Input Data Monitors
IFD Installation Troubleshooting• Demo Mode
• The IFD can be put into demo mode at any time while on the
ground for familiarization purposes.
• Entry into demo mode is accessed via inserting a USB fob with a
dummy file called “DEMO” (no file type suffix and no quotes) prior
to power application.
• Power up the IFD with that fob inserted and the IFD will boot to the
following screen.
• While in demo mode, the IFD will “fly” the active flight plan in the
FMS including any altitude constraints that may be part of the flight
plan.
• The starting point of demo mode is whatever location is entered in
the flight plan origin and changing the origin location while in demo
mode will jump the location to the origin coordinates.
IFD Log Download Page
• System Log – This log provides an in-depth record of the navigation
state. From this log, you can re-create many aspects of the FMS output
and IFD state. It logs at a rate of approximately 1Hz;
• Flight Log – This log provides a detailed record of your aircraft state as
measured by the various IFD sensors. It logs at a rate of approximately
5Hz;
• Engine Log – This log provides details on fuel flow sensor data (if
configured). It logs at a rate of approximately ¼ Hz;
• Event Log – This log contains miscellaneous data such as all alerts,
keystrokes, system status and error messages, etc. It is designed to be
diagnostics log for Avidyne Service Center technicians and not expected
to be used by owners/operators. It logs at an on-condition rate;
• Voltage Log – This log contains internal diagnostic data such as the
voltages and currents on sub-system boards, temperatures and internal
fan status. It logs at a rate of approximately 1Hz.
• Download Configuration Info - This log contains the system
configuration for the unit.
https://oasisnetworkusa.com/avidyne-support
Oasis Aviation Network-Support
https://oasisnetworkusa.com/avidyne-support
Call tech support with any questions
404-309-0877