ifm efector Project Book

Rev. 1 1-November-2019

Table of Contents 13.1 PROFINET/PROFIBUS, I/O LINK I/O MODULES, MULTI-PORT DEVICES. ............................... 3 23.1 FIBER OPTIC AND FORK SWITCHES ........................................................................................ 4 23.2 FLOW SWITCHES ....................................................................................................................... 5 23.5 LEVEL SWITCHES ....................................................................................................................... 7 23.6 LEVEL AND TEMPERATURE COMBINED SWITCHES .............................................................. 9 23.10 PHOTOELECTRIC SWITCHES, 18MM .................................................................................... 10 23.11 PHOTOELECTRIC SWITCHES, RECTANGULAR BODY ....................................................... 12 23.12 PRESSURE, AIR/COOLANT/HYDRAULIC/LUBRICATION .................................................... 14 23.13 PROXIMITY SWITCHES, SQUARE BODY .............................................................................. 16 23.14 PROXIMITY SWITCHES, RING & TUBE ................................................................................. 17 23.15 PROXIMITY, TUBULAR PLUS MOUNTING BRACKETS ........................................................ 18 23.18 TEMPERATURE SWITCHES, ELECTRONIC SENSOR .......................................................... 22 23.19 VACUUM SWITCHES .............................................................................................................. 23 23.21 PROXIMITY CAPACITIVE SWITCHES (NON-METAL DETECTION) ...................................... 23 23.22 NON-CONTACT INDUCTIVE (SAFETY RATED PROXIMITY) ................................................ 24 23.24 MINI INDUCTIVE AND PHOTOELECTRIC SWITCHES .......................................................... 25 23.25 ULTRASONIC SWITCHES ...................................................................................................... 27 23.26 CYLINDER SWITCHES ............................................................................................................ 27 SERVICE AND SUPPORT CONTACTS ............................................................................................. 28

13.1 Profinet/Profibus, I/O LINK I/O modules, multi-port devices. ifm# Description Picture

ALxxxx

IO Link PROFINET Masters IP 67 AL1100 4-port, A code M12, 4 pin power supply. 4 @ Class A Ports AL1102 8-port, A code M12, 4 pin power supply. 8 @ Class A Ports Standard Ethernet port for communication. Standard M12 “A” Code Port for power. Input / Output ports meet classification for Class 2 Power Supply circuit

ALxxxx

IO Link PROFINET Masters IP 67 & 69K AL1101 4-port, IP67. A code M12 4 pin power supply. 4 @ Class A Ports AL1103 8-port, IP67. A code M12 4 pin power supply. 8 @ Class A Ports Standard Ethernet port for communication. Standard M12 “A” Code Port for power. Input / Output ports meet classification for Class 2 Power Supply circuit

23.1 Fiber optic and fork switches ifm# Description Picture

OBF500 36mm x 15mm x 60mm rectangular plastic housing fiber optic amplifier for plastic fibers, 10 to 36 VDC, PNP, light or dark operate with micro DC 4-pin connector.

OBF504 36mm x 15mm x 60mm rectangular plastic housing fiber optic amplifier for metal fibers, 10 to 36 VDC, PNP, light or dark operate with micro DC 4-pin connector.

OO5000

Fiber-optic amplifier, Plastic housing, Sensing range 3.8 m, Range 300 mm, 5-wire, DC PNP, Operating voltage: 12...36 V DC, Current consumption: 50 (24 V DC) mA, light-on / dark-on programmable, Quick disconnect, M12 connector, 2 channels for 2 plastic fiber optics Types FE-11 / FT-11

OO5001

Fiber-optic amplifier, Plastic housing, Sensing range 3.8 m, Range 300 mm, 7-wire, DC PNP, Operating voltage: 12...36 V DC, Current consumption: 50 (24 V DC) mA, light-on / dark-on programmable, Quick disconnect, M12 connector, 4 channels for 4 plastic fiber optics Types FE-11 / FT-11

OO5002

Fiber-optic amplifier, Plastic housing, Sensing range 3.8 m, Range 300 mm, 9-wire, DC PNP, Operating voltage: 12...36 V DC, Current consumption: 50 (24 V DC) mA, light-on / dark-on programmable, Quick disconnect, M16 connector, 6 channels for 6 plastic fiber optics Types FE-11 / FT-11

OO5003

Fiber-optic amplifier, Plastic housing, Sensing range 3.8 m, Range 300 mm, 11-wire, DC PNP, Operating voltage: 12...36 V DC, Current consumption: 50 (24 V DC) mA, light-on / dark-on programmable, Quick disconnect, M16 connector, 8 channels for 8 plastic fiber optics Types FE-11 / FT-11

Fibers for OBF500 and OO Units

E20775, E20773, E20776, E20774, E20766, E20765, E20767, E20768, E20715, E20748, E20749, E21107, E20712, E21106, E20639, E20645, E20651, E20648, E20654, E20633, E21105, E20711, E20758, E20782, E20714, E20603, E21101, E21103, E20609, E20615, E20606, E21102, E20753, E21104, E20752, E20689, E20757

See Link

Fibers for OBF504 E20824, E20826, E20829, E20822, E20830, E20825, E20827, E20828, E20823 See Link

OPL200 Optical angle sensor, zinc diecast housing, DC PNP, light-on/dark-on mode selectable with 3 pin M8 connector. 50mm(x) x 50mm (y) x 60mm (z). .5mm smallest detectable object.

OPL201 Optical angle sensor, zinc diecast housing, DC PNP, light-on/dark-on mode selectable with 3 pin M8 connector. 80mm(x) x 80mm (y) x 100mm (z). .7mm smallest detectable object.

OPU20x

Optical fork sensor, zinc diecast housing, DC PNP, light-on/dark-on mode selectable with 3 pin M8 connector. Part # Width(mm) Depth(mm) Smallest detectable object(mm) OPU200 10 17 .3 OPU201 20 25 .4 OPU202 30 35 .5 OPU203 50 55 .5 OPU204 80 55 .5 OPU205 120 60 .8

OPU70x

Optical laser fork sensor, zinc diecast housing, DC PNP, light-on/dark-on mode selectable with 3 pin M8 connector. Part # Width(mm) Depth (mm) Smallest detectable object (mm) OPU700 30 35 .05 OPU701 50 55 .05 OPU702 80 35 .05

23.2 Flow Switches ifm# Description Picture

SI5010

10 LED display, solid state operation, PNP normally open or normally closed output, micro 4 pin connector, 20 to 36 VDC, 300 bar over-pressure rating, standard response unit, IP 67 with micro DC 4 pin M12 connector. Operating range 3…300cm/sec. Need mounting accessory.

SI0508

10 LED display, solid state operation, PNP normally open or normally closed output, micro 4 pin connector, 20 to 36 VDC, 300 bar over-pressure rating, standard response unit, manual setpoint programming, IP 67 with micro DC 4 pin M12 connector. Operating range 3…300cm/sec. Need mounting accessory.

SM4000

Magnetic Inductive Flow Meter, 5 to 3000 ml/min measuring range, 1 NO or NC PNP or NPN or output or pulse output, 1 programmable output as a second PNP or NPN output, 0-10V or 4-20 ma analog output for flow or temperature, 16 bar pressure rating -10° to 70°C media, 19 to 36 VDC, IP 67 with 4 pin micro M12 connector, G1/4 flat seal process connection. Conductive medias only

SM6000

Magnetic Inductive Flow Meter, 0.03 to 6.60 GPM measuring range, 1 NO or NC PNP or NPN or output or pulse output, 1 programmable output as a second PNP or NPN output, 0-10V or 4-20 ma analog output for flow or temperature, 16 bar pressure rating -10° to 70°C media, 19 to 36 VDC, IP 67 with 4 pin micro M12 connector, G1/2 flat seal process connection. Conductive medias only.

SM6004

Magnetic Inductive Flow Meter, 0.03 to 6.60 GPM measuring range, Output 1 with scalable 0-10V or 4-20 ma analog flow output, Output 2 with scalable 0-10V or 4-20 ma analog -20° to 80°C temperature output, media 16 bar pressure rating, -10° to 70°C media temperature, 19 to 36 VDC, IP 67 with 4 pin micro M12 connector, G1/2 flat seal process connection. Conductive medias only.

SM7000

Magnetic Inductive Flow Meter, 0.2 to 50.0 LPM measuring range, 1 NO or NC PNP or NPN or output or pulse output, 1 programmable output as a second PNP or NPN output, 0-10V or 4-20 ma analog output for flow or temperature, 16 bar pressure rating -10° to 70°C media, 19 to 36 VDC, IP 67 with 4 pin micro M12 connector, G3/4 flat seal process connection. Conductive medias only.

SM7004

Magnetic Inductive Flow Meter, 0.03 to 13.22 GPM measuring range, Output 1 with scalable 0-10V or 4-20 ma analog flow output, Output 2 with scalable 0-10V or 4-20 ma analog -20° to 80°C temperature output, media 16 bar pressure rating, -10° to 70°C media temperature, 19 to 36 VDC, IP 67 with 4 pin micro M12 connector, G3/4 flat seal process connection. Conductive medias only.

SM8000

Magnetic Inductive Flow Meter, .2 to 100. LPM measuring range, 1 NO or NC PNP or NPN or output or pulse output, 1 programmable output as a second PNP or NPN output, 0-10V or 4-20 ma analog output for flow or temperature, 16 bar pressure rating -10° to 70°C media, 19 to 36 VDC, IP 67 with 4 pin micro M12 connector, G1 flat seal process connection. Conductive medias only.

SM8004

Magnetic Inductive Flow Meter, 0.10 to 26.40 GPM measuring range, Output 1 with scalable 0-10V or 4-20 ma analog flow output, Output 2 with scalable 0-10V or 4-20 ma analog -20° to 80°C temperature output, media 16 bar pressure rating, -10° to 70°C media temperature, 19 to 36 VDC, IP 67 with 4 pin micro M12 connector, G1 flat seal process connection. Conductive medias only.

SM9000

Magnetic Inductive Flow Meter, 5 to 300 LPM GPM measuring range, 1 NO or NC PNP or NPN or output or pulse output, 1 programmable output as a second PNP or NPN output, 0-10V or 4-20 ma analog output for flow or temperature, 16 bar pressure rating -10° to 70°C media, 19 to 36 VDC, IP 67 with 4 pin micro M12 connector, G1 flat seal process connection. Conductive medias only.

SM9004 Magnetic Inductive Flow Meter, 1.3 to 79.3 GPM measuring range, Output 1 with scalable 0-10V or 4-20 ma analog flow output, Output 2 with scalable 0-10V or 4-20 ma analog -20° to 80°C temperature output, media 16 bar pressure rating, -10° to 70°C media temperature, 19 to 36 VDC, IP 67 with 4 pin micro M12 connector, G2 flat seal process connection. Conductive

medias only.

SM2000

Magnetic Inductive Flow Meter, 5 to 600 LPM GPM measuring range, 1 NO or NC PNP or NPN or output or pulse output, 1 programmable output as a second PNP or NPN output, 0-10V or 4-20 ma analog output for flow or temperature, 16 bar pressure rating -10° to 70°C media, 19 to 36 VDC, IP 67 with 4 pin micro M12 connector, G1 flat seal process connection. Conductive medias only.

SM2004

Magnetic Inductive Flow Meter, 1.3 to 158.5 GPM measuring range, Output 1 with scalable 0-10V or 4-20 ma analog flow output, Output 2 with scalable 0-10V or 4-20 ma analog -20° to 80°C temperature output, media 16 bar pressure rating, -10° to 70°C media temperature, 19 to 36 VDC, IP 67 with 4 pin micro M12 connector, G2 flat seal process connection. Conductive medias only.

SDx500

Air Flow Meter, Output 1: NO or NC PNP or NPN, pulse output or IO Link. Output 2: PNP or NPN output, 0-10V or 4-20 ma analog output for flow, pressure or temperature, -10° to 60°C, -1 – 16 bar pressure, 18 to 30 VDC, IP 67 with 4 pin micro M12 connector. SD5500 Connection: G ¼ .8 – 250 l/min range SD6500 Connection: R ½ 4 – 1250 l/min range SD8500 Connection: R 1 14 – 3750 l/min range SD9500 Connection: R 1 ½ 20 – 6830 l/min range SD2500 Connection: R 2 40 – 11,670 l/min range

SA****

Flow Meters with numerical display for water, coolants, oils or gas flow applications. Programmable (PNP) outputs, Output 1: Switching NO/NC, frequency or IO Link. Output 2: Switching NO/NC (flow or temperature), analog (flow or temperature), frequency or external teach. 4 pin M12 Connector. Measuring range .04 – 3 m/s H2O (2-10 m/s air). SA2000 Connection: Male G ½ 19.2mm long probe SA5000 Connection: M18 x 1.5 for adapter 45mm long probe SA4100 Connection: Compression fitting 100mm long probe SA4300 Connection: Compression fitting 200mm long probe

23.5 Level Switches ifm# Description Picture

LK1022 Numerical display, 264mm probe length, 195mm active zone, 1 NO or NC PNP output, 1 overflow protection NO or NC PNP output, 12 to 30 VDC IP 67 with 4 pin micro M12 connector.

LK1023 Numerical display, 472mm probe length, 390mm active zone, 1 NO or NC PNP outputs, 1 overflow protection NO or NC PNP output, 12 to 30 VDC, IP 67 with 4 pin micro M12 connector.

LK1024 Numerical display, 728mm probe length, 585mm active zone, 1 NO or NC PNP outputs, 1 overflow protection NO or NC PNP output, 12 to 30 VDC, IP 67 with 4 pin micro M12 connector.

LK8122 Numerical display, 264mm probe length, 195mm active zone, 3 NO or NC PNP outputs, 1 overflow protection NO or NC PNP output, 12 to 30 VDC, IP 67 with 8 pin micro M12 connector.

LK8123 Numerical display, 472mm probe length, 390mm active zone, 3 NO or NC PNP outputs, 1 overflow protection NO or NC PNP output, 12 to 30 VDC, IP 67 with 4 pin micro M12 connector.

LK8124 Numerical display, 728mm probe length, 585mm active zone, 3 NO or NC PNP outputs, 1 overflow protection NO or NC PNP output, 12 to 30 VDC, IP 67 with 8 pin micro M12 connector.

KI5085 30mm metal barrel, 90mm long, 15mm sensing range adjustable via pushbutton, non-flush mount, 10 to 36 VDC, PNP, IP 65, programmable normally open or closed operation with micro DC 4 pin M12 connector.

LR3000 Guided Wave Radar level Sensor, numerical display, 150mm to 1600mm probe length, 1 NO or NC PNP outputs, 1 @ 0-10V or 4-20 ma analog output, 12 to 30 VDC, IP 67 with 4 pin micro M12 connector

LR7000 Guided Wave Radar level Sensor, numerical display, 150mm to 1600mm probe length, 2 NO or NC PNP outputs, 12 to 30 VDC, IP 67 with 4 pin micro M12 connector

LR8000 Guided Wave Radar level Sensor, numerical display, 150mm to 1600mm probe length, 4 NO or NC PNP outputs, 12 to 30 VDC, IP 67 with 4 pin micro M12 connector

E432xx

Probes for LR switches E43203 240 mm long E43204 450 mm long E43205 700 mm long E43207 1000 mm long E43208 1200 mm long E43209 1400 mm long E43210 1600 mm long

E43201 Flange mounting plate for LR switches

E43202 Flange mounting plate for LR switches

E11627 T splitter, 8 pin female M12 to 2 @ 4 pin M12 male connectors.

LMT1xx

Point level sensor, 316L stainless steel housing with PEEK tip, DC PNP, programmable NO or NC output with 4 pin M12 connector. Factory output setting complimentary normally open and closed output. Part # Insertion length(mm) Factory Media Setting

LMT100 12 Water based fluids

LMT110 12 Oil based fluids

LMC4xx

Point level sensor, 316L stainless steel housing with PEEK tip, DC PNP, programmable NO or NC output with 4 pin M12 connector. Factory output setting complimentary normally open and closed output. G ½ mounting at back of switch. Part # Factory Media Setting

LMC400 Water based fluids

LMC410 Oil based fluids

LMC1xx

Point level sensor, 316L stainless steel housing with PEEK tip, DC PNP, programmable NO or NC output with 4 pin M12 connector. Factory output setting complimentary normally open and closed output. G ½ mounting on front of switch. Part # Insertion length(mm) Factory Media Setting

LMC100 12 Water based fluids

LMC110 38 Oil based fluids

LMC5xx

Point level sensor, 316L stainless steel housing with PEEK tip, DC PNP, 2 programmable NO or NC outputs with 4 pin M12 connector. Factory output setting complimentary normally open and closed output. ½” NPT mounting on front of switch. Part # Insertion length(mm) Factory Media Setting

LMC502 40 Water based fluids

23.6 Level and Temperature Combined Switches ifm# Description Picture

LT8022 Level and temperature switch, numerical display, 264mm probe length, 195mm active zone, -10° to 60°C temperature monitoring, 4 @ PNP NO or NC outputs of type 2 @ level, 2 @ temperature, 12 to 30 VDC, IP 68 with 8 pin micro M12 connector.

LT8023 Level and temperature switch, numerical display, 472mm probe length, 390mm active zone, -10° to 60°C temperature monitoring, 4 @ PNP NO or NC outputs of type 2 @ level, 2 @ temperature, 12 to 30 VDC, IP 67 with 8 pin micro M12 connector..

LT8024 Level and temperature switch, 728mm probe length, 585mm active zone, -10° to 60°C temperature monitoring, 4 @ PNP NO or NC outputs of type 2 @ level, 2 @ temperature, 12 to 30 VDC, IP 67 with 8 pin micro M12 connector.

E11627 T splitter, 8 pin female M12 to 2 @ 4 pin M12 male connectors.

LT3xxx

Level and temperature switch, numerical display, -10° to 70°C temperature monitoring (65°C coolant), 1 digital and 1 analog output, 12 to 30 VDC, IP 67 with 4 pin micro M12 connector. IO Link capable with level and temperature values available. Part # Probe Length (mm)

LT3022 264

LT3023 472

LT3024 728

23.10 Photoelectric Switches, 18mm ifm# Description Picture

OGH500 18mm stainless steel barrel, 72mm long, background suppressed diffuse reflective sensor, 300mm sensing range, 10 to 36 VDC PNP light or dark operate, IP 67 with micro DC 4 pin M12 connector.

OGH200 18mm stainless steel barrel, 72mm long, background suppressed diffuse reflective sensor, 250mm sensing range, 10 to 36 VDC PNP light or dark operate, IP 67 with micro DC 4 pin M12 connector.

OGH580 18m m mounting, diecast zinc & PEI cube style (52mm x 36mm x 18mm) body, background suppressed diffuse reflective sensor, 200mm sensing range, 10 to 36 VDC PNP light or dark operate, IP 67 with micro DC 4 pin M12 connector.

OGH280 Cube sensor, 18mm stainless steel barrel mouting, 36mm long, background suppressed diffuse reflective sensor, up to 100 mm fixed sensing range, 10 to 30 VDC PNP light operate, IP 67 with micro DC 4 pin M12 connector.

OGH281 Cube sensor, 18mm stainless steel barrel mounting, 36mm long, background suppressed diffuse reflective sensor, up to 200 mm fixed sensing range, 10 to 30 VDC PNP light operate, IP 67 with micro DC 4 pin M12 connector.

OGS500 18mm stainless steel barrel, 72 mm visible red transmitter, up to 25m range, 10 to 36 VDC, PNP, light or dark operate, IP 67 with micro DC 4 pin M12 connector.

OGE500 18mm stainless steel barrel, 72 mm visible red receiver, up to 25m range, 10 to 36 VDC, PNP, light or dark operate, IP 67 with micro DC 4 pin M12 connector.

OGP500 18mm stainless steel barrel, 72 mm polarized retro-reflective visible red light, up to 15m range, 10 to 36 VDC, PNP, light or dark operate, IP 67 with micro DC 4 pin M12 connector. Need reflector.

OGT500 18mm stainless steel barrel, 72 mm diffuse reflective with visible red light, up to 800mm range, 10 to 36 VDC, PNP, light or dark operate, IP 67 with micro DC 4 pin M12 connector.

OGP200 18mm stainless steel barrel, 60mm long, polarized retro-reflective sensor, 4m sensing range, 10 to 36 VDC PNP , dark operate, IP 67 with micro DC 4 pin M12 connector. Need reflector.

OGP201 18mm stainless steel barrel, 60mm long, polarized retro-reflective sensor, 4m sensing range, 10 to 36 VDC PNP light operate, IP 67 with micro DC 4 pin M12 connector. Need reflector.

OGS200 18mm stainless steel barrel, 60mm long transmitter, 20m sensing range, 10 to 36 VDC, IP 67 with micro DC 4 pin M12 connector. Need receiver.

OGE200 18mm stainless steel barrel, 60mm long receiver, 20m sensing range, dark-on mode, 10 to 36 VDC, IP 67 with micro DC 4 pin M12 connector. Need transmitter.

OGE201 18mm stainless steel barrel, 60mm long receiver, 20m sensing range, light-on mode, 10 to 36 VDC, IP 67 with micro DC 4 pin M12 connector. Need transmitter.

OGH700 18mm stainless steel barrel, 72 mm background suppressed diffuse reflective CLASS 1 laser, 20mm – 200mm range, 10 to 36 VDC, PNP, light or dark operate, IP 67 with micro DC 4 pin M12 connector.

OG5124 18mm stainless steel barrel, 75mm long, diffuse reflective sensor, 200mm sensing range, 10 to 30 VDC PNP light operate, IP 68 with micro DC 4 pin M12 connector.

OG5123 18mm stainless steel barrel, 75mm long, diffuse reflective sensor, 100mm sensing range, 10 to 30 VDC PNP light operate, IP 68 with micro DC 4 pin M12 connector.

OGP700 18mm stainless steel barrel, 72 mm polarized retro-reflective CLASS 1 laser, up to 15m range, 10 to 36 VDC, PNP, light or dark operate, IP 67 with micro DC 4 pin M12 connector. Need reflector.

OGS700 18mm stainless steel barrel, 72 mm CLASS 1 laser transmitter, up to 60m range, 10 to 36 VDC, PNP, light or dark operate, IP 67 with micro DC 4 pin M12 connector. Need receiver.

OGE700 18mm stainless steel barrel, 72 mm CLASS 1 laser receiver, up to 60m range, 10 to 36 VDC, PNP, light or dark operate, IP 67 with micro DC 4 pin M12 connector. Need transmitter.

OGS701 18mm stainless steel barrel, 72 mm CLASS 1 laser transmitter, up to 2m range, 10 to 36 VDC, PNP, light or dark operate, IP 67 with micro DC 4 pin M12 connector. Need receiver.

OGE701 18mm stainless steel barrel, 72 mm CLASS 1 laser receiver, up to 2m range, 10 to 36 VDC, PNP, light or dark operate, IP 67 with micro DC 4 pin M12 connector. Need transmitter.

OGD580 Long range laser switch, cube stainless steel body style, 18mm barrel mounting on face, 36mm long, 2 programmable outputs settable from 30mm to 1500 mm, 10 to 30 VDC PNP light operate, IP 67 with micro DC 4 pin M12 connector.

OGD592 High accuracy laser switch, cube stainless steel body style, 18mm barrel mounting on face, 36mm long, 2 programmable outputs settable from 30 mm to 300 mm, 10 to 30 VDC PNP light operate, IP 67 with micro DC 4 pin M12 connector.

23.11 Photoelectric Switches, Rectangular Body ifm# Description Picture

O5H500 Rectangular 46.8mm x 70.3mm x 18.2mm plastic barrel, diffuse-reflective background suppressed, 50mm - 1800mm sensing range, 10 to 36 VDC, PNP, light or dark operate, IP 67 with micro DC 4 pin M12 connector.

O5P200 Rectangular 46.8mm x 70.3mm x 18.2mm plastic body, polarized retro-reflective, 7m sensing range, dark operate, 10 to 36 VDC, PNP, IP 67 with micro DC 4 pin M12 connector. Need reflector.

O5P201 Rectangular 46.8mm x 70.3mm x 18.2mm plastic body, polarized retro-reflective, 7m sensing range, light operate, 10 to 36 VDC, PNP, IP 67 with micro DC 4 pin M12 connector. Need reflector.

O5S200 Rectangular 46.8mm x 70.3mm x 18.2mm plastic body transmitter, 20m sensing range, 10 to 36 VDC, PNP, IP 67 with micro DC 4 pin M12 connector. Need receiver.

O5E200 Rectangular 46.8mm x 70.3mm x 18.2mm plastic body receiver, 20m sensing range, 10 to 36 VDC, PNP, IP 67 with micro DC 4 pin M12 connector. Need transmitter.

O1Dxxx

Time of Flight, Class 2 laser (except O1D155), rectangular housing, diffuse-reflective, range dependent on part number, 18 to 30 VDC, output (s) dependent on individual part, IP 67 with micro DC 4 pin M12 connector. Part # Description

O1D100 Up to 10m range

O1D102 Up to 3.5m range, optimized for shiny black targets

O1D105 Up to 10m range, background suppression > 19m

O1D155 Up to 6m range, Class 1 laser

O5Dxxx

Time of Flight, Rectangular 46.8mm x 70.3mm x 18.2mm plastic body receiver, diffuse-reflective, range dependent on part number, 18 to 30 VDC, 1 @ PNP light operate and 1 @ PNP dark operate outputs, IP 67 with micro DC 4 pin M12 connector. Part # Description

O5D100 Up to 2m range, Class 2 laser

O5D150 Up to 6m range, Class 1 laser

OJ5056 Diffuse reflection sensor, Rectangular, plastics, Range 150 mm, 4-wire, DC PNP, Operating voltage: 10...30 V DC, Current consumption: 13 mA, light-on / dark-on programmable, Quick disconnect, M8 connector, Electronic lock, Visible laser light, LASER CLASS 1

O6x301

Small rectangular photoelectric sensor, 316 SS housing, PNP, light-on / dark-on programmable with 4 pin 0.3 m pigtail M12 connector.

Part # Type Range

O6E301 Thru Beam receiver 10 meters O6S301 Thru Beam transmitter 10 meters O6P301 Polarized retro-reflective 5 meters O6T301 Diffuse reflective 500mm O6H301 Diffuse background suppressed 200mm

O6x400

Small rectangular photoelectric sensor, 316 SS housing, PNP, light-on / dark-on programmable with 4 pin M8 connector. Designed for coolant applications.

Part # Type Range

O6E400 Thru Beam receiver 10 meters O6S400 Thru Beam transmitter 10 meters O6P400 Polarized retro-reflective 5 meters O6T400 Diffuse reflective 500mm O6H400 Diffuse background suppressed 200mm

O6x301

Small rectangular photoelectric sensor, plastic housing, PNP, light-on / dark-on programmable with 4 pin 0.3 m pigtail M12 connector.

Part # Type Range

O6E701 Thru Beam receiver 15 meters O6S701 Thru Beam transmitter 15 meters O6P701 Polarized retro-reflective 8 meters O6H701 Diffuse background suppressed 100mm

23.12 Pressure, air/coolant/hydraulic/lubrication ifm# Description Picture

PN7834

Numerical display with -.90 to 10 bar Set Point range, 2 NO or NC, PNP or NPN outputs, G1/8 Port, IP 65 with micro DC 4 pin M12 connector M12 connector with a 20 bar over-pressure limit. Pneumatic applications only.

PN7809

Numerical display with -.975 to 1 bar Set Point range, 2 NO or NC, PNP or NPN outputs, G1/8 Port, IP 65 with micro DC 4 pin M12 connector M12 connector with a 20 bar over-pressure limit. Vacuum switch for pneumatic applications only.

PN7xxx

2 color numerical rotatable display, 2 NO or NC, PNP or NPN outputs, female G1/4 BSPP Port, IP 67 with micro DC 4 pin M12 connector. PN7160 0 – 600 bar PN7070 0 – 400 bar PN7071 0 – 250 bar PN7092 0 – 100 bar PN7093 0 – 25 bar PN7094 -1 – 10 bar PN7096 0 – 2.5 bar PN7097 0 – 1 bar

PN7xxx

2 color numerical rotatable display, 2 NO or NC, PNP or NPN outputs, male G1/4 BSPP Port, IP 67 with micro DC 4 pin M12 connector. PN7560 0 – 600 bar PN7570 0 – 400 bar PN7571 0 – 250 bar PN7592 0 – 100 bar PN7593 0 – 25 bar PN7594 -1 – 10 bar PN7596 0 – 2.5 bar PN7097 0 – 1 bar

PK652x

No display, mechanical set and reset adjustment, 1 NO and 1 NC PNP output, G1/4 BSPP male Port, IP 67 with micro DC 4 pin M12 connector. PK6520: 20 – 400 bar PK6521: 12.5 – 250 bar PK6522: 5 – 100 bar PK6523: 0 – 25 bar PK6524: 0 – 10 bar

PN2xxx

2 color numerical rotatable display, 1 NO or NC, PNP or NPN outputs, 1 NO or NC, PNP or NPN outputs, second output programmable PNP or NPN or scalable analog 0 – 10 VDC or 4 – 20 ma output, G1/4 BSPP female port, IP 67 with micro DC 4 pin M12 connector. PN2160 0 – 600 bar PN2070 0 – 400 bar PN2071 0 – 250 bar PN2092 0 – 100 bar PN2093 0 – 25 bar PN2094 -1 – 10 bar PN2096 0 – 2.5 bar PN2097 0 – 1 bar PN2098 -.125 – .250 bar

PN2xxx

2 color numerical rotatable display, 1 NO or NC, PNP or NPN outputs, 1 NO or NC, PNP or NPN outputs, second output programmable PNP or NPN or scalable analog 0 – 10 VDC or 4 – 20 ma output, G1/4 BSPP male port, IP 67 with micro DC 4 pin M12 connector. PN2560 0 – 600 bar PN2570 0 – 400 bar PN2571 0 – 250 bar PN2592 0 – 100 bar PN2593 0 – 25 bar PN2594 -1 – 10 bar PN2596 0 – 2.5 bar PN2597 0 – 1 bar PN2598 -.125 – .250 bar

PNI024 Differential Pressure Switch. Numerical display with -2.46 to 10 bar Set Point range, 2 NO or NC, PNP or NPN outputs, G1/4 BSPP Port, IP 65 with micro DC 4 pin M12 connector with a 50 bar over-pressure limit. Use with PA / PX analog transmitter & E11566 splitter.

PNI023 Differential Pressure Switch. Numerical display with -6.2 to 25 bar Set Point range, 2 NO or NC, PNP or NPN outputs, G1/4 BSPP Port, IP 65 with micro DC 4 pin M12 connector with a 100 bar over-pressure limit. Use with PA / PX analog transmitter & E11566 splitter.

PNI022 Differential Pressure Switch. Numerical display with -24.6 to 100 bar Set Point range, 2 NO or NC, PNP or NPN outputs, G1/4 BSPP Port, IP 65 with micro DC 4 pin M12 connector with a 300 bar over-pressure limit. Use with PA / PX analog transmitter & E11566 splitter.

PA302x

Analog Output, DC, G1/4 BSPP female Process Fitting, M12 Connector

PA3022 0 – 100 bar PA3023 0 – 25 bar PA3024 0 – 10 bar

PQ7834 Numerical display with -13 to 145 psi Set Point range, 2 NO or NC, PNP outputs, G1/8 BSPP Port, G1/4 BSPP Port, IP 65 with pico DC 4 pin M8 connector with a 290 psi over-pressure limit.

PS7570 Part Seated Pressure Switch. Numerical display, supply pressure 0.7 to 1.5 bar. 2 NO or NC, PNP or NPN outputs, IP 65 with micro DC 4 pin M12 connector.

23.13 Proximity Switches, Square Body ifm# Description Picture

IM5115 66mm x 40mm x 40mm rectangular plastic housing, 20mm sensing range, flush mount, 10 to 36 VDC, PNP, IP 67, normally open output with micro DC 4 pin M12 connector. Sensing direction selectable in 5 directions.

IM5117 66mm x 40mm x 40mm rectangular plastic housing, 40mm sensing range, non-flush mount, 10 to 36 VDC, PNP, IP 67, normally open output with micro DC 4 pin M12 connector. Sensing direction selectable in 5 directions.

IN5225 40mm x 26mm plastic cube switch, 40mm long, two Sensors with 4mm sensing range non-flush mount, 10 to 36 VDC, PNP, 2 normally open outputs, IP 67 with micro DC 4 pin M12 connector.

IN5327 40mm x 26mm plastic cube switch, 40mm long, two Sensors with 4mm sensing range non-flush mount, 10 to 36 VDC, PNP, 2 normally open outputs, IP 67 with micro DC 4 pin M12 connector.

23.14 Proximity Switches, Ring & Tube ifm# Description Picture

I7R2**

Ring Sensor, 10- 35 VDC, PNP, 10 to 35 VDC, IP67, Programmable normally open or closed output with micro DC 4 pin M12 connector. I7R201: Static operation, 10.1 mm ring diameter I7R205: Static operation, 15.1 mm ring diameter I7R209: Static operation, 20.1 mm ring diameter I7R213: Static operation, 25.1 mm ring diameter I7R217: Static operation, 51 mm ring diameter

I85002 Static operation tube Sensor, 10- 35 VDC, PNP, 10 to 35 VDC, IP67, Normally open output with micro DC 4 pin M12 connector.

23.15 Proximity, tubular plus mounting brackets ifm# Description Picture

IE5318 8mm metal barrel, 62mm long, 2mm sensing range flush mount, 10 to 36 VDC, PNP, IP 67, normally open with micro DC 4 pin M12 connector.

IE5331 8mm metal barrel, 62mm long, 2mm sensing range flush mount, 10 to 36 VDC, PNP, IP 67, normally open with micro DC 4 pin M12 connector.

IE5351 8mm metal barrel, 37mm long, 3mm sensing range flush mount, 10 to 30 VDC, PNP, IP 67, normally open .3m long PVC pigtail cable with micro DC 4 pin M12 connector.

IE5352 8mm metal barrel, 37mm long, 3mm sensing range flush mount, 10 to 30 VDC, PNP, IP 67, normally open .3m long PVC pigtail cable with micro DC 4 pin M12 connector.

IFC204 12mm metal barrel, 45mm long, 4mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector.

IFS240 12 mm metal barrel, 70mm long, 4mm sensing range flush mount, 10 to 36 VDC, PNP, IP 67,68 & 69K, normally open with micro DC 4 pin M12 connector.

IFC205 12mm metal barrel, 50mm long, 7mm sensing range non-flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector.

IFT245 12 mm metal barrel, 70mm long, 6mm sensing range non-flush mount, 10 to 36 VDC, PNP, IP 68 & 69K, normally open with micro DC 4 pin M12 connector. Stainless Steel sensing face.

IFC263 12mm metal barrel, Ferrous-only sensing, 60mm long, 2.5mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector. Stainless Steel sensing face

IFC259 12mm metal barrel 65mm long, 3mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector. K=1 correction factor

IGC204 18mm metal barrel, 46mm long, 8mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector.

IGC210 18mm metal barrel, 70mm long, 8mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector. Ceramic sensing face

IGC205 18mm metal barrel, 51mm long, 12mm sensing range non-flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector.

IGC213 18mm metal barrel, 70mm long, 12mm sensing range non-flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector.

IGT249 18 mm metal barrel, 70mm long, 12mm sensing range non-flush mount, 10 to 36 VDC, PNP, IP 68 & 69K, normally open with micro DC 4 pin M12 connector. Stainless Steel sensing face.

IGC249 18mm metal barrel, Ferrous-only sensing, 70mm long, 4.5mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector. Stainless Steel sensing face

IGC232 18mm metal barrel, 65mm long, 8mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector. K=1 correction factor

IIC200 30mm metal barrel, 50mm long, 15mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector.

IIC201 30mm metal barrel, 50mm long, 22mm sensing range non-flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector.

IIC218 30mm metal barrel, 65mm long, 8mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector. K=1 correction factor

IEC200 8mm metal barrel, 60mm long, 2mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector. Impact Resistant Stainless Steel sensing face

IFC258 12mm metal barrel, 60mm long, 3mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector. Impact Resistant Stainless Steel sensing face

IGC248 18mm metal barrel, 70mm long, 5mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector. Impact Resistant Stainless Steel sensing face

IIC224 30mm metal barrel, 70mm long, 10mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector. Impact Resistant Stainless Steel sensing face

IIT231 30 mm metal barrel, 70mm long, 25mm sensing range non-flush mount, 10 to 36 VDC, PNP, IP 68 & 69K, normally open with micro DC 4 pin M12 connector. Stainless Steel sensing face.

IFC207 12mm metal barrel, 45mm long, 4mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally closed with micro DC 4 pin M12 connector.

IFC208 12mm metal barrel, 50mm long, 7mm sensing range non-flush mount, 10 to 36 VDC, PNP, IP 68, normally open with micro DC 4 pin M12 connector.

IFC209 12mm metal barrel, 45mm long, 4mm sensing range flush mount, ceramic sensing face, 10 to 36 VDC, PNP, IP 68, normally closed with micro DC 4 pin M12 connector.

IFC261 12mm metal barrel, 60mm long, 3mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally closed with micro DC 4 pin M12 connector. Impact Resistant Stainless Steel sensing face

IFC264 12mm metal barrel, Ferrous-only sensing, 60mm long, 2.5mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally closed with micro DC 4 pin M12 connector. Stainless Steel sensing face

IGC207 18mm metal barrel, 46mm long, 8mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally closed with micro DC 4 pin M12 connector.

IGC208 18mm metal barrel, 51mm long, 12mm sensing range non-flush mount, 10 to 36 VDC, PNP, IP 68, normally closed with micro DC 4 pin M12 connector.

IGC209 18mm metal barrel, 46mm long, 8mm sensing range flush mount, ceramic sensing face, 10 to 36 VDC, PNP, IP 68, normally closed with micro DC 4 pin M12 connector.

IGC250 18mm metal barrel, Ferrous-only sensing, 70mm long, 4.5mm sensing range flush mount, 10 to 36 VDC, PNP, IP 68, normally closed with micro DC 4 pin M12 connector. Stainless Steel sensing face

E10848 Mounting sleeve, M12 x 1 - Ø 8 mm, 32mm long. For 8mm switches.

E10849 Mounting sleeve, M12 x 1 - Ø 8 mm, 42mm long. For 8mm switches.

E10741 Mounting sleeve, M16 x 1 - Ø 12 mm, 45mm long. For 12mm switches.

E10742 Mounting sleeve, M24 x 1,5 – Ø 18 mm, 58mm long. For 18mm switches.

E10743 Mounting sleeve, M36 x 1 - Ø 30 mm, 58mm long. For 30mm switches.

E10806 Mounting sleeve, M16 x 1 - Ø 12 mm, 34mm long. For 12mm switches.

E10807 Mounting sleeve, M24 x 1,5 – Ø 18 mm, 36mm long. For 18mm switches.

E10808 Mounting sleeve, M36 x 1 - Ø 30 mm, 36mm long. For 30mm switches.

E11114 Mounting sleeve, M16 x 1 - Ø 12 mm, 31mm long. For 12mm switches.

E11115 Mounting sleeve, M22 x 1 – Ø 18 mm, 31mm long. For 18mm switches.

E11521 Mounting clamp, M8

E11047 Mounting clamp, M12

E11048 Mounting clamp, M18

E11049 Mounting clamp, M30

IFS297 12mm SS barrel 45mm long, 4mm sensing range flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor.

IFS298 12mm SS barrel 45mm long, 8mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor.

IFS299 12mm SS barrel 45mm long, 10mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor.

IFS304 12mm SS barrel 60mm long, 4mm sensing range flush mount, 10 to 30 VDC, PNP, IP 67, 68 &

69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor. Brass (brass white bronze coated) or SS (stainless steel).

IFS316 12mm SS barrel 60mm long, 4mm sensing range flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally closed with micro DC 4 pin M12 connector. K=1 correction factor. Brass (brass white bronze coated) or SS (stainless steel).

IFS305 12mm SS barrel 60mm long, 8mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor.

IFS318 12mm SS barrel 60mm long, 8mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally closed with micro DC 4 pin M12 connector. K=1 correction factor.

IFS306 12mm SS barrel 60mm long, 10mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor.

IFS317 12mm SS barrel 60mm long, 10mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally closed with micro DC 4 pin M12 connector. K=1 correction factor.

IGS287 18mm SS barrel 45mm long, 8mm sensing range flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor.

IGS288 18mm SS barrel 45mm long, 12mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor.

IGS289 18mm SS barrel 45mm long, 15mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor.

IGS290 18mm SS barrel 60mm long, 8mm sensing range flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor.

IGS306 18mm SS barrel 60mm long, 8mm sensing range flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally closed with micro DC 4 pin M12 connector. K=1 correction factor.

IGS291 18mm SS barrel 60mm long, 12mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor.

IGS308 18mm SS barrel 60mm long, 12mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally closed with micro DC 4 pin M12 connector. K=1 correction factor.

IGS292 18mm SS barrel 60mm long, 15mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor.

IGS307 18mm SS barrel 60mm long, 15mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally closed with micro DC 4 pin M12 connector. K=1 correction factor.

IIS281 30mm SS barrel 45mm long, 15mm sensing range flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor.

IIS282 30mm SS barrel 60mm long, 15mm sensing range flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor.

IIS301 30mm SS barrel 60mm long, 15mm sensing range flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally closed with micro DC 4 pin M12 connector. K=1 correction factor.

IIS283 30mm SS barrel 60mm long, 22mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor.

IIS303 30mm SS barrel 60mm long, 22mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally closed with micro DC 4 pin M12 connector. K=1 correction factor.

IIS284 30mm SS barrel 60mm long, 30mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. K=1 correction factor.

IIS302 30mm SS barrel 60mm long, 30mm sensing range non-flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally closed with micro DC 4 pin M12 connector. K=1 correction factor.

IFT257 12 mm metal barrel, 45mm long, 4mm sensing range flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. Stainless Steel sensing face.

IGT258 18 mm metal barrel, 45mm long, 8mm sensing range flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. Stainless Steel sensing face.

IIT243 30 mm metal barrel, 50mm long, 15mm sensing range flush mount, 10 to 30 VDC, PNP, IP 67, 68 & 69K, normally open with micro DC 4 pin M12 connector. Stainless Steel sensing face.

23.18 Temperature Switches, Electronic Sensor ifm# Description Picture

TR7439 2 color numerical display control monitor with -100° to 600°C deg C Set Point range, 2 NO or NC PNP or NPN outputs, 18 to 32 VDC, IP 67 with 4 pin micro M12 connector. Need RTD and mounting accessories.

TN7511 Self contained numerical display control monitor with -40° to 150°C deg F Set Point range, 2 NO or NC PNP or NPN outputs, 18 to 30 VDC, IP 67 with 4 pin micro M12 connector. Need mounting accessories.

TR2439

2 color numerical display control monitor with -100° to 600°C deg C Set Point range, 1 NO or NC PNP or NPN outputs, second output programmable PNP or NPN or scalable analog 0 – 10 VDC or 4 – 20 ma output, 18 to 30 VDC, IP 67 with 4 pin micro M12 connector. Need RTD and mounting accessories.

TTx081

RTD Probes for TR temperature monitors, PT100 with micro 4 pin M12 connector, 40° to 150°C temperature range, T05 / 09 temperature response 1 / 3 seconds, 10mm diameter. TT1081 160mm long TT2081 260mm long TT3081 360mm long TT5081 160mm long Other probes available on ifm.com website in accessories.

TW2100 Infrared numerical display temperature sensor, M30 barrel, 0...999.5 °C range, 1 NO or NC PNP output, second scalable analog 4 – 20 ma output, 18 to 32 VDC, IP 65 with 4 pin micro M12 connector.

23.19 Vacuum Switches ifm# Description Picture

PN7099

2 color rotatable numerical display with -1000 to 1000 mbar Set Point range, 2 NO or NC PNP or NPN outputs, G1/4 BSPP female port, IP 67 with micro DC 4 pin M12 connector with a 20000 mbar over-pressure limit. Vacuum switch.

PN2099

2 color rotatable numerical display with -970 to 1000 mbar Set Point range, 1 NO or NC, PNP or NPN outputs, 1 NO or NC, PNP or NPN outputs, second output programmable PNP or NPN or scalable analog 0 – 10 VDC or 4 – 20 ma output, G1/4 BSPP Port, G1/4 BSPP Port, IP 65 with micro DC 4 pin M12 connector with a 20000 mbar over-pressure limit. Vacuum switch.

PQ7809 Numerical display with -14.2 to 14.4 psi Set Point range, 2 NO or NC, PNP outputs, G1/8 BSPP Port, G1/4 BSPP Port, IP 65 with pico DC 4 pin M8 connector with a 290 psi over-pressure limit. Vacuum switch.

23.21 Proximity Capacitive Switches (non-metal detection)

ifm# Description Picture

KF5001 12mm metal barrel, 60mm long, 4mm sensing range adjustable via potentiometer, flush mount, 10 to 36 VDC, PNP, IP 65, normally open with micro DC 4 pin M12 connector.

KF5002 12mm metal barrel, 60mm long, 8mm sensing range adjustable via potentiometer, non-flush mount, 10 to 36 VDC, PNP, IP 65, normally open with micro DC 4 pin M12 connector.

KI5085 30mm metal barrel, 90mm long, 8mm sensing range adjustable via pushbutton, flush mount, 10 to 30 VDC, PNP, IP 65, programmable normally open or closed operation with micro DC 4 pin M12 connector.

KI5087 30mm metal barrel, 90mm long, 15mm sensing range adjustable via pushbutton, non-flush mount, 10 to 30 VDC, PNP, IP 65, programmable normally open or closed operation with micro DC 4 pin M12 connector.

KG6000 18mm plastic barrel, 92mm long, up to 30mm sensing range adjustable via potentiometer, non-flush mount, 10 to 30 VDC, PNP, IP 67 & 69K, programmable normally open or closed operation with micro DC 4 pin M12 connector. 11 LED display for switch point setting.

KI6000 30mm plastic barrel, 92mm long, up to 40mm sensing range adjustable via potentiometer, non-flush mount, 10 to 30 VDC, PNP, IP 67 & 69K, programmable normally open or closed operation with micro DC 4 pin M12 connector. 11 LED display for switch point setting.

23.22 Non-contact inductive (safety rated proximity) ifm# Description Picture

GF711S

Fail-safe inductive sensor, M 12 x 1, metal thread, 4-wire, DC, operating voltage: 24 V DC (19.2...30 V DC), quick disconnect, M12 connector, complies with the requirements: SIL 2 (IEC 61508), SILcl 2 (IEC 62061) & PL d (ISO 13849-1).

0.5 – 4 mm enable zone, non-flush mount.

GG712S

Fail-safe inductive sensor, M 18 x 1, metal thread, 4-wire, DC, operating voltage: 24 V DC (19.2...30 V DC), quick disconnect, M12 connector, complies with the requirements: SIL 2 (IEC 61508), SILcl 2 (IEC 62061) & PL d (ISO 13849-1).

1 – 5 mm enable zone, flush mount.

GG711S

Fail-safe inductive sensor, M 18 x 1, metal thread, 4-wire, DC, operating voltage: 24 V DC (19.2...30 V DC), quick disconnect, M12 connector, complies with the requirements: SIL 2 (IEC 61508), SILcl 2 (IEC 62061) & PL d (ISO 13849-1).

1 – 8 mm enable zone, non-flush mount.

GI712S

Fail-safe inductive sensor, M30 x 1.5, metal thread, 4-wire, DC, operating voltage: 24 V DC (19.2...30 V DC), Quick disconnect, M12 connector, Complies with the requirements: SIL 2 (IEC 61508), SILcl 2 (IEC 62061) & PL d (ISO 13849-1).

1 – 10 mm enable zone, flush mount.

GI711S

Fail-safe inductive sensor, M 18 x 1, metal thread, 4-wire, DC, operating voltage: 24 V DC (19.2...30 V DC), quick disconnect, M12 connector, complies with the requirements: SIL 2 (IEC 61508), SILcl 2 (IEC 62061) & PL d (ISO 13849-1).

1 – 15 mm enable zone, non-flush mount.

GI701S

Fail-safe inductive sensor, M30 x 1.5, threaded type, 4-wire, DC, Operating voltage: 24 V DC (19.2...30 V DC), quick disconnect, M12 connector, complies with the requirements: SIL 3 (IEC 61508), SILcl 3 (IEC 62061), Category 4 (ISO 13849-1) & PL e (ISO 13849-1).

6 – 12 mm enable zone, non-flush mount.

GM701S

Fail-safe inductive sensor, rectangular, plastics, 4-wire, DC, operating voltage: 24 V DC (19.2...30), quick disconnect, M12 connector, complies with the requirements: SIL 3 (IEC 61508), SILcl 3 (IEC 62061), Category 4 (ISO 13849-1) 4 & PL e (ISO 13849-1).

10 – 15 mm enable zone, non-flush mount.

GM705S

Fail-safe inductive sensor, rectangular, plastics, 4-wire, DC, operating voltage: 24 V DC (19.2...30), quick disconnect, M12 connector, complies with the requirements: SIL 3 (IEC 61508), SILcl 3 (IEC 62061), Category 4 (ISO 13849-1) & PL e (ISO 13849-1).

4 – 20 mm enable zone, non-flush mount.

23.24 Mini inductive and photoelectric switches ifm# Description Picture

IZ5035 4mm metal barrel, 45mm long, .8mm sensing range flush mount, 10 to 36 VDC, PNP, normally open with 3 pin M8 connector.

IY5036 5mm metal barrel, 45mm long, .8mm sensing range flush mount, 10 to 36 VDC, PNP, normally open with 3 pin M8 connector.

IT5034 6.5mm metal barrel, 50mm long, 1.5mm sensing range flush mount, 10 to 36 VDC, PNP, normally open with 3 pin M8 connector.

IT5044 6.5mm metal barrel, 50mm long, 4mm sensing range non-flush mount, 10 to 36 VDC, PNP, normally open with 3 pin M8 connector.

IT5040 6.5mm metal barrel, 30.5mm long, 2mm sensing range flush mount, 10 to 36 VDC, PNP, normally open with 3 pin M8 connector

IL5004 5mm x 5mm rectangular metal barrel, 52mm long, 2mm sensing range flush mount, 10 to 36 VDC, PNP, normally open with 3 pin M8 connector.

IL5005 5mm x 5mm rectangular metal barrel, 52mm long, 2mm sensing range flush mount, 10 to 36 VDC, PNP, normally open with 3 pin M8 connector.

OJ5130 Rectangular plastic body, thru-beam transmitter, 10m sensing range, 10 to 30 VDC with 4 pin M8 connector. Side sensing.

OJ5131 Rectangular plastic body, thru-beam receiver, 10m sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Side sensing.

OJ5126 Rectangular plastic body, polarized retro-reflective, 2m sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Side sensing.

OJ5122 Rectangular plastic body, diffuse reflective, 600mm sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Side sensing.

OJ5148 Rectangular plastic body, background suppressed diffuse reflective, 400mm sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Side sensing.

OJ5108 Rectangular plastic body, thru-beam transmitter, 10m sensing range, 10 to 30 VDC with 4 pin M8 connector. Face sensing.

OJ5109 Rectangular plastic body, thru-beam receiver, 10m sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Face sensing.

OJ5104 Rectangular plastic body, polarized retro-reflective, 2m sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Face sensing.

OJ5100 Rectangular plastic body, diffuse reflective, 600mm sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Face sensing.

OJ5144 Rectangular plastic body, background suppressed diffuse reflective, 400mm sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Face sensing.

OJ5141 Rectangular plastic body Class 1 Laser, thru-beam transmitter, 1m sensing range, 10 to 30 VDC with 4 pin M8 connector. Side sensing.

OJ5142 Rectangular plastic body Class 1 Laser, thru-beam receiver, 1m sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Side sensing.

OJ5138 Rectangular plastic body Class 1 Laser, thru-beam transmitter, 15m sensing range, 10 to 30 VDC with 4 pin M8 connector. Side sensing.

OJ5139 Rectangular plastic body Class 1 Laser, thru-beam receiver, 15m sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Side sensing.

OJ5136 Rectangular plastic body Class 1 Laser, polarized retro-reflective, 8m sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Side sensing.

OJ5158 Rectangular plastic body Class 1 Laser, background suppressed diffuse reflective, 150mm sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Side sensing.

OJ5154 Rectangular plastic body Class 1 Laser, background suppressed diffuse reflective, 200mm sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Side sensing.

OJ5116 Rectangular plastic body Class 1 Laser, thru-beam transmitter, 15m sensing range, 10 to 30 VDC with 4 pin M8 connector. Face sensing.

OJ5117 Rectangular plastic body Class 1 Laser, thru-beam receiver, 15m sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Face sensing.

OJ5114 Rectangular plastic body Class 1 Laser, polarized retro-reflective, 8m sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Face sensing.

OJ5152 Rectangular plastic body Class 1 Laser, background suppressed diffuse reflective, 200mm sensing range, 10 to 30 VDC, PNP, light or dark operate programmable with 4 pin M8 connector. Face sensing.

23.25 Ultrasonic switches ifm# Description Picture

UGTxxx

18mm metal barrel, diffuse reflective, 10 to 30 VDC, 1 @ PNP, light or dark operate programmable or IO Link output with micro DC 4 pin M12 connector. Part # Sensing Range (mm)

UGT524 40 - 300

UGT525 60 - 800

UGT526 80 - 1200

UGTxxx

18mm metal barrel, diffuse reflective, 10 to 30 VDC, 1 @ PNP, light or dark operate programmable or IO Link output with micro DC 4 pin M12 connector. Part # Sensing Range (mm)

UGT592 40 - 300

UGT593 60 - 800

UGT594 80 - 1200

23.26 Cylinder switches

ifm# Description Picture

MK5107

Magnetic cylinder sensor, GMR cell T-slot mounting, plastic housing, 3-wire DC PNP, normally open output, 0.3m pigtail, IP 67 with micro DC 4 pin M12 connector.

MK5139

Magnetic cylinder sensor, AMR cell T-slot mounting, plastic housing, 3-wire DC PNP, normally open output, 0.3m pigtail, IP 67 with micro DC 4 pin M12 connector.

MK5304

Magnetic cylinder sensor GMR cell, C-slot mounting, plastic housing, 3-wire DC PNP, normally open output, 0.3m pigtail, IP 67 with micro DC 4 pin M12 connector.

MK5314

Magnetic cylinder sensor AMR cell, C-slot mounting, plastic housing, 3-wire DC PNP, normally open output, 0.3m pigtail, IP 67 with micro DC 4 pin M12 connector.

Service and Support Contacts USA & Canada (Global Ford Leader) Europe

Name Mike Sutherland Klaus-Peter Prause

Company ifm efector, inc. ifm electronic gmbh

Address 28001 Cabot Drive Suite 120 Novi, MI 48377 U.S.A

Friedrichstr. 1 45128 Essen Germany

Phone +1 248-669-7453 +49 201 2422 – 1213

Cell +1 248-766-1466 +49 151 - 1481 7604

e-mail mailto:mike.sutherland@ifm.com mailto:klaus-peter.prause@ifm.com

Fax +1 800-329-0436 +49 201 24 22 - 16 54

Website www.ifmefector.com www.ifm-electronic.com

Asia (except others listed) Japan

Name Ching Fum Ywee Tadataka Une

Company ifm electronic pte ltd efector co., ltd.

Address 25 International Business Park #03-26/29 German Centre Singapore 609916

Tozan Building 10F 4-4-2 Nihonbashi-Honcho, Chuo-ku Tokyo, 103-0023, Japan

Phone +65 6562 8661/2/3 +81-3-5255-5508

Cell +81-90-2314-3983

e-mail fumywee.ching@ifm.com tadataka.une@ifm.com

Fax +65 6562 8660

Website https://www.ifm.com/ https://www.ifm.com/jp/ja

Australia China

Name David Delany Wan Hui

Company Ifm efector, Pty Ltd. ifm electronic (shanghai), Lmt

Address Suite 3, 745 Springvale Road Mulgrave 3170 Melbourne Victoria

Building 15, No. 912, Bibo Road Pudong, Shanghai 201210 China

Phone +61 3 8561 0500 +86 21 5027 8559

Cell +61 422 447 945 +86 138 1783 9540

e-mail mailto:dave.delany@ifm.com hui.wan@ifm.com

Fax +61 3 9562 2653 +86 21 5027 8669

Website www.ifm.com/au www.ifm.cn

France Mexico

Name Michel Astier Martín Mánuel

Company Ifm electronic ifm efector, S. de R.L. de C. V.

Address Immeuble Uranus 1-3 rue Jean Richepin 93192 NOISY LE GRAND CEDEX FRANCE

Ave. Arq. Pedro Ramírez Vázquez # 200 Edificio 4, Planta Baja (Banco Base) Col. Valle Oriente San Pedro Garza García, N.L. C.P. 66269

Phone +33 1 41 67 80 92 (+81) 8040.3535 ext. 1135

Cell +33 6 07 06 99 18 +52 81 1759 3890

e-mail michel.astier@ifm.com Martin.Manuel@ifm.com

Fax 0820 22 22 04

Website www.ifm.com/fr www.ifm.com/mx

South Korea Italy

Name Andreas Kim Alberto Cicognini

Company Ifm electronic, Ltd. ifm electronic s.r.l.

Address Hyundai Liberty House, 2F, #201 Hannam-Dong 258, Yongsan-Gu, Seoul South Korea

Via Paracelso, 18 20864 Agrate Brianza (MB) Italy

Phone +82 2 790-5610 +39 039 6 89 99 82

Cell +82 10-8544-0299 +39 348 829 20 04

e-mail andreas.kim@ifm.com alberto.cicognini@ifm.com

Fax +82 2 790-5613 +39 039 6 89 99 95

Website www.ifm.com/kr www.ifm-electronic.com

United Kingdom India

Name Paul Stansfield Mr. Sudhagar M

Company Ifm electronic, Ltd. ifm electronic India Private Limited

Address Unit 3 Crompton Court Burntwood Business Park Burntwood, WS7 3GJ

Ground Floor,Nostalgia Complex , New No-4 ,Soundrapandian street , Ashoknagar, Chennai- 600083

Phone +44 208 213 2222 +91 044 – 42077047

Cell +44 7977 288607 +91 9840038714

e-mail paul.stansfield@ifm.com sudhagar_m@ifm-electronic.in

Website www.ifm.com www.ifm.com

South Africa Thailand

Name Brent Tucker Prinya Palm Sermsukulchai

Company Ifm electronic pty ltd. Sang Chai Meter Co., Ltd.

Address Unit 7, 2nd Floor Eden Office Park 83 Second Avenue Newton Park 6056 Port Elizabeth

694/16-19 Phalholyothin Road Samsen Nai, Phayatha, Thailand

Phone +27 41 365 5972 +66 (02) 616 8051 Ext#7272, 8200

Cell +27 83 632 7667 +66 (081) 838 6080

e-mail brent.tucker@ifm.com palm@sangchaimeter.com

Website www.ifm.com www.ifm.com

Argentina Brazil

Name Gustavo Yangosian Maurício Penha

Company Ifm electronic s.r.l. ifm electronic Ltda

Address Manuela Sáenz 323 5º piso, oficina 3º Puerto Madero, C1107BPA, Bs.As. Argentina

Rua Eleonora Cintra 140 Jardim Anália Franco – São Paulo Brasil

Phone +54 11 5353 3436 +55 11 2672-1772

Cell +54 9 11 3219 0101 +55 11 9-8193-0681

e-mail mailto:Gustavo.Yangosian@ifm.com mauricio.penha@ifm.com

Website www.ifm.com/ar www.ifm.com/br