+ All Categories
Home > Documents > III 16 05 2017 IS 13620:1993 - bis.org.in · केंद्री हु वि ाग –iii...

III 16 05 2017 IS 13620:1993 - bis.org.in · केंद्री हु वि ाग –iii...

Date post: 03-Nov-2018
Category:
Upload: dinhkhanh
View: 215 times
Download: 0 times
Share this document with a friend
8
कीय मुहर विभाग –III हमारा संदभ : सी एम डी –III /16 :13620 16 05 2017 विषय : IS 13620:1993 के अनुसार उपाद के माणन हेतु एस टी आई उपरोत विषय के संदभ म IS 13620:1993 के अनुसार उपाद के माणन हेतु एस टी आई संलन है। उपरोत एस टी आई, जो कक पहले से चलत है , सी संबधित पकार के तकाल संदभ के लए बी आई एस इंानेट पर अपलोड ककया जा रहा है। अलमत क मार, ि. सी (सी एम डी –III) मुख(सी एम डी –III) सी संबधित पकार को परचाललत आई टी एस विाग बीआईएस इंानेट पर डालने हेतू CENTRAL MARKS DEPARTMENT-III Our Ref: CMD-III/16:13620 16 05 2017 Subject: STI for certification of Fusion Bonded Epoxy Coated as per IS 13620:1993 With reference to the subject mentioned above, please find enclosed the STI for certification of Fusion Bonded Epoxy Coated as per IS 13620:1993. The above STI which is already implemented, is being hosted in BIS intranet for ready reference of all concerned. Amit Kumar Sc E (CMD-III) Head (CMD-III) Circulated to: All Concerned Copy to: ITS for hosting in BIS intranet
Transcript

कें द्रीय महुर विभाग –III

हमारा सदंर्भ : सी एम डी –III /16 :13620 16 05 2017

विषय : IS 13620:1993 के अनसुार उत्पाद के प्रमाणन हेत ुएस टी आई

उपरोक्त विषय के सदंर्भ में IS 13620:1993 के अनसुार उत्पाद के प्रमाणन हेत ुएस टी आई सलंग्न है।

उपरोक्त एस टी आई, जो कक पहले से प्रचललत है, सर्ी सबंधित पक्षकारों के तत्काल सदंर्भ के ललए बी आई एस इंट्रानेट पर अपलोड ककया जा रहा है।

अलमत कुमार, ि.ै सी (सी एम डी –III)

प्रमखु(सी एम डी –III)

सर्ी सबंधित पक्षकारों को पररचाललत

आई टी एस विर्ाग — बीआईएस इंट्रानेट पर डालने हेत ू

CENTRAL MARKS DEPARTMENT-III

Our Ref: CMD-III/16:13620 16 05 2017

Subject: STI for certification of Fusion Bonded Epoxy Coated as per IS 13620:1993

With reference to the subject mentioned above, please find enclosed the STI for certification

of Fusion Bonded Epoxy Coated as per IS 13620:1993.

The above STI which is already implemented, is being hosted in BIS intranet for ready

reference of all concerned.

Amit Kumar

Sc E (CMD-III)

Head (CMD-III)

Circulated to: All Concerned

Copy to: ITS for hosting in BIS intranet

PROFORMA FOR OBTAINING PRODUCTION DETAILS

Period covered

Name of Licensee

CM/L No.

Name of Articles (s) IS No.

Grade/Type/Size/Variety/Class/Rating

Brand/Trade/Name(s) of Product covered under BIS Certification Mark

Total production of the articles(s) licensed for certification marking

Total production of the article(s) conforming to Indian Standard

Production covered with BIS Certification Mark and its Value :

a) Quantity

b) Value (Rs.)

Brand Name used on production covered under BIS Certification Mark

Calculation of marking fee on unit-rate basis; Marking Fee per unit

a) Unit

b) Quantity covered with BIS Certification Mark

c) Marking fee rounded off in whole rupees as obtained by applying unit rates given in (a)

on quantity given in (b)

NOTE: In case a clause is not applicable, suitable remarks may be given against it

Quantity not covered with BIS Certification Mark, if any.

Reasons for such non-coverage

Brand Name under which non-ISI goods were sold

Quantity exported with BIS Standard Mark and its value

Brand Name under which BIS Certified goods are exported

Authentication by Chartered Accountant


Recommended