For well over a decade iKON AVS have been at the forefront of creating innovative audio visual and control solutions.

A selection of key benefits:

Innovative AV control and connectivity products

UK design and manufacture to highest standards for reliability

Pre- sales & technical support

Products fit standard UK socket boxes

Knowledgeable and friendly staff

Many products are available as cost effective bundled solutions

iKON engineers have over 100 years combined experience in the design and installation of audio and AV systems and

we are here to provide you with specialist help and advice.

Reliability through Quality and Simplicity

“Reliability through quality and simplicity” is our design principle:

only components of the highest quality are used throughout, design

is kept as simple as possible to increase reliability and reduce costs.

All iKON AVS products carry athree year RTB warranty, selectedranges carry a lifetime warranty.

Simple projector controllers.....Page 2 Simple control amplifier.....Page 3

Integrated contol system.....Page 4 Synergy controllers.....Page 5

Audio controller.....Page 6 Audio routing system.....Page 7

Amplifiers.....Page 8

Dado panels.....Page 9 Euro panels.....Page 10 Euro frames.....Page 11

Desk access.....12 Floor panels.....Page 13

Podule control system.....Page 14 Modular solutions.....Page 16

Critical system audio distribution.....Page 16 Adapters.....Page 16

PRO SolutionsConnectivity

Controllers Audio

SPCSimple projector controllers

The iKON AVS SPC series are cost effective, entry-level control interfaces

for display devices, including LCD and DLP Projectors as well as LCD and

Plasma displays.

All SPC controllers feature an orange backlit power button with two or three

green backlit input select buttons and a blue backlit picture blank button. On

the SPC 6 and 7 two additional backlit buttons are provided for volume raise

and lower.

The controllers feature a bi-directional RS-232 interface for control of the display

and two open collector outputs for the control of an electric screen via a SPC-PP1

or external relays. An input is provided for room occupancy detection, panel lockout

or remote system shutdown.

To program the unit it is only necessary to download a library module for complete

control over the display, although full control over input selection, warm up and cool

down times is provided. The installer can also set up a four-button sequence to lock

and unlock the panel's operation.

The SPC series are fabricated on a 50 mm Euro module allowing their use in a

wide range of wall panels in UK, European and NZ formats. This format also

allows the easy combining of control and input panels as well as use in the Ikon

range of desk modules.

Supplied complete with a UK white mounting frame.

2 For more details go to www.ikonavs.com/SPC

SC-AMPSimple Control Amplifier

The Simple Control Amplifier (SC-AMP) is the ideal audio video solution for small and

medium size rooms.

Cost effective and offering energy saving opportunities, it is also easy to specify and

simple to install.

The SC-AMP is a combined entry-level projector or display controller, a 20 watt stereo

amplifier and convenient laptop connection or laptop and USB connection. All on a

two-gang white metal panel that fits a standard 35mm UK back box.

Although it can be easily programmed, the SC-AMP can be supplied pre-programmed

for your choice of display.

Featuring automatic shut-down to save power and panel lock-out to prevent

unauthorised use, the amplifier can also be used on its own when the projector isn’t

required. Simply plug an audio source into the 3.5mm jack on the front and it will

automatically turn on the amplifier.

The internal stereo amplifier is an 86% efficient class D design with a RMS output of

10 watts per channel into 8 Ohms. It is fitted with screw terminals for power, speakers

and inputs on the rear for permanent connections and a 3.5mm stereo jack on the

front panel.

For more details go to www.ikonavs.com/SC-AMP 3

iCS-10Integrated control system

The iCS-10 incorporates a fully configurable control system along

with routers to handle XVGA, Component video, Composite video

and ten channels of audio. There is also a microphone input as

well as both front and rear expansion slots.

The iCS-10 provides:

4 into 1+1 XVGA & Component video switch

4 into 1+1 Composite video switch

10 into 1 stereo audio switch with a master volume control and balanced outputs

Microphone input with both local and remote mute

x Bi-directional RS232 serial ports

Motorised screen, projector lift and power control

Room occupancy support

Projector control

PodNet to communicate with other Ikon Podules

2

Designed for the installation market, the iCS-10 offers a versatile combination of facilities

and control options allowing its use as a stand alone switch / controller or use it with Octo,

Wall or Touch Podules. It can also be controlled by third party panels using one RS232

port whilst retaining the display control function via the second RS232 port.

The iCS-10 features bi-directional RS232 interfaces for control over the display and other

peripheral equipment, therefore it allows handshaking to ensure synchronisation of the

devices.

The two open collector outputs can be used for the control of electric screens, projector lifts

or projector power, whilst two contact inputs are provided for room occupancy shutdown,

volume control or remote system shutdown.

4 For more details go to www.ikonavs.com/iCS-10

SynergySynergy range of controllers

Extensive onboard facilities, quick and easy programming and simplicity

of expansion and linking, are key benefits of this innovative range of

controllers.

A bi-directional RS232 port provides control over displays and other RS232

devices whilst IR ports supporting either single or dual emitters are provided

for control of amplifiers, lighting and video players. RS232 and IR commands

can be loaded from embedded libraries or user created files.

Two outputs provide control of external relays and indicators and these can

use the built-in screen, protector lift and power control routines, or they

can be configured to operate other devices. Inputs are available for use

with external buttons; either operating in parallel with the panel or as extra

buttons. They can also be used for room occupancy detection with a PIR,

or used to remotely shut the system down.

The Syn-Link port provides linking of panels in multi-room systems,

connection to Synergy peripherals or RS232 port to control other

equipment. Using the Syn-Link port, panels can be linked as either

Master / Slave, Slave / Master or Dual Master configurations with

no software overheads or additional programming. This port is also

used to connect the AU4 series of audio controllers, again with simple

tick box programming. The Syn-Link port can also be used to connect

the Synergy panel to a PC enabling two way control.

Synergy panels all fit a standard depth UK back box and are provided with

detachable screw terminals for ease of installation.

For more details go to www.ikonavs.com/synergy 5

AU4Audio controller

The AU4 is a serial controlled four input audio switcher and volume control. It also provides

a microphone input, which is mixed with the program audio.

The AU4 audio controller is available in two versions:

AU4L

AU4P

provides line level outputs on RCA sockets.

as the AU4L but also incorporates a 20 watt per channel amplifier.

The microphone input has switchable phantom power and a selectable hi-pass filter.

It also has its own level control and EQ. The microphone is mixed with the program

audio after the remote volume facility and the microphone can be turned on and off

either remotely via the Synergy panel, or using a push button connected to terminals

on the audio controller.

When an input is selected the volume can be adjusted with any change stored against the

input. Dip switches on the rear of the unit allow either full range (+15 to –48dB ) or limited

range (+15dB to –15dB), The default level can also be set as fixed (0dB), or retaining the

last setting.

The AU4 is designed to operate in conjunction with either the Synergy or SPC controllers

but can also be used as a stand-alone RS232 controlled audio system.

6 For more details go to www.ikonavs.com/AU4

Matrix 2Audio routing system

Use as the heart of a distributed audio system, as the router for a multi room system or

as part of a complex boardroom system, the iKON Matrix 2 Podule offers an easily

controlled and configured central stereo audio processor with individual level control

of each output. It is also ideally suited for multiroom audio and headphone distribution

system when used with the remote panels.

Inputs are unbalanced via 3.5 mm stereo jacks; whilst all the outputs are balanced

and share individual RJ45 sockets with control and DC power, allowing a single

Cat5 cable between the Matrix 2 and its remote outlets and control panels.

M2-C M2-HC M2-BM M2-US50mm Euromodule providing

remote control and indication

of the Matrix 2 input and

volume. It is fitted with rear

panel balanced audio outputs

on screw terminals

Contains a local headphone

amplifier with remote control

of the Matrix 2 for input

source and volume all on a

50 mm Euro module

A series of mono, stereo,

balanced and unbalanced

audio Euromodule audio

panels are also available

for terminating to external

amplifiers

The current output assignments are shown on the front panel LCD and the Matrix 2 also

incorporates multiple selectable operating configurations, volume range setting and online

level trimming expanding its abilities beyond simple audio switching. The Matrix 2 can also

be controlled via RS-232 or connected via PodNet using a single Cat5 cable to allow remote

selection of input sources and volume control from individual rooms or centrally from our

Wall, Euro and Touch Podules.

For more details go to www.ikonavs.com/Matrix2Pod 7

M2-US

SGA-40 & DPA-40Amplifiers

The SGA-40 and DPA-40 are the ideal audio video solution for small and medium

size rooms, offering cost effective and energy saving opportunities, they are easy

to specify and simple to install.

Both amplifiers are 20 watt per channel stereo wall and dado mounting. They are

ideal for multi-room audio, classroom, hotel bedroom and small meeting room

applications. They use an 86% efficient class D design and have a RMS output of

20 watts per channel into 8 Ohms when powered from an 15V power supply or 10

watts when powered by the included 12V power supply, and as most quality

loudspeakers are 8 Ohms, maximum efficiency is assured. Additionally the

amplifiers adopt an ultra low power standby state when no signal is present.

The SGA-40 is manufactured in the 50mm euro format and supplied complete with

a UK size white mounting frame. Alternative frames are available in a wide range

of finishes from iKON AVS as well as other reputable switch plate manufacturers.

The SGA-40 fits a standard UK single back box and requires only a 35mm depth.

It will also fit the single DIN back box. It is fitted with two rear inputs on screw

terminals for permanent connections and two 3.5mm stereo jacks on the front

panel for other sources.

The DPA-40 is manufactured on a twin gang steel plate where ultimate durability is

required. The DPA-40 fits a UK back box and requires only a 35mm depth. It is fitted

with screw terminals for speakers and inputs on the rear and a 3.5mm stereo jack on

the front panel for other sources. Additionally the amplifier has remote shutdown ability

adopting an ultra low power standby state.

8 For more details go to www.ikonavs.com/Amplifiers

Designed for use in Dado trunking or standard UK back boxes, this range of pre-engraved

panels is available with a wide variety of panel and internal connector configurations. The

panels utilise high quality Crabtree blanks and are machined on the back to recess the

connectors, achieving both the required mounting depth as well as greatly enhancing

the panels strength

Selection of singlegang plates

DADO-1G

DADO-1G-J

DADO-1G-P

DADO-1G-PC

DADO-USB

DADO-1G-AB

DADO-1G-STA

1 buffered

15 p

in

D

15 p

in

D

L+R

Phono

L+R

Phono

Video

Phono

Video

Phono

3.5m

m

jack

3.5m

m

jack

USB

USB

Plastic

Plastic

Stainless

Stee

Stainless

Stee

Selection of twingang plates

DADO-2G-P

DADO-2G-J

DADO-2G-PC

DADO-2G-USB

DADO-2G-AB

DADO-WB-BU

2+1 buffered

2+1 buffered

Our confidence in the quality

of our Dado Panels extends

to a lifetime warranty* against

breakage, this is in addition

to our usual 3 year warranty.

Can't see what you

want, see our web pages

for more options, or

contact us for our

custom plate service.

#Terms and conditions apply

For more options go to www.ikonavs.com/DADOplate 9

Dado PanelsConnection panels

white steel only

1

1

1

1

1 1

1

1

1

1

1 1

1

1

1

1

1

1 1

1

1

2

2

1

1

1

1

1

1

1

1

1

Euro PanelsConnection panels

A selection of 25mm panels 15

pin

D

15 p

in

D

L+R

Phono

L+R

Phono

Video

Phono

Video

Phono

Compo

nent

video

3 Pho

nos

Compo

nent

video

3 Pho

nos

3.5m

m

jack

3.5m

m

jack

USB

GC-F

F4m

m

spea

ker

Coa

x

aeria

lF'ty

pe

coax

S-video

HDM

I

DVI

Display

Port XLR

EP-A25EP-V25EP-CP25EP-PC25EP-GC25EP-USB25EP-SV25EP-JK25EP-SPK25EP-CA25EP-CS25EP-AB25

A selection of 50mmpanels

EP-PC50EP-PC50VEP-PC50JEP-DVI50-STEP-AB50-STEP-XLR50EP-HDMI50EP-HDMI50-90-AVEP-HDMI50-90-VVEP-HDMI50-90-CVEP-DPJEP-DPA

2 buffered

buffered

1

11 1

1

1

11

11

1

1

111

11 1

11

111111

1

1 111

11

Can't see what you

want, see our web pages

for more options, or

contact us for our custom

plate service.

10 For more details and options go to www.ikonavs.com/EuroPlates

A versatile range of Audio Visual 'snap in' modules to fit the 50mm Euro frame format.

Ideal for all installation requirements where a mix of connectivity is required.

Euro FramesConnection Panels

EP-12-GB

2 x 150mm aperture

Back box depth = 47mm

Overall size 164mm x 196mm

EP-400GW

2 x 200mm aperture

Back box depth = 45mm

Overall size 250mm x 215mm

EP-200GW

1 x 200mm aperture

Back box depth = 45mm

Overall size 250mm x 85mmEP-12-GW

2 x 150mm aperture

Back box depth = 47mm

Overall size 164mm x 196mm

Can't see what you

want, see our web

pages for more

options or contact

us for our custom

service.

White plastic Satin brushed stainless steel

EP-100FW

EP-50FW

EP-100FSB

EP-50FSBBlack plastic

EP-50FB

EP-100FB

Satin brushed brass

EP-100FBB

EP-50FBB

Chrome plated cast alloy Satin chrome

EP-100FC

EP-50FC

EP-100FSC

EP-50FSC

To see complete range go to www.ikonavs.com/EuroFramesMain 11

Desk AccessConnection panels

For use with the iKON AVS Euro Panels, Euro Podules, SPC controllers and SGA-40

amplifiers, this range of desk access modules enables their use in or on desks and cabinets.

RDM-6HFlip top horizontal Desk Access Module supplied in a black and silver finish. Constructed

from an aluminium extrusion it has 150mm of available space for 6 x 25mm or 3 x 50mm

Euro Panels. Select your requirements from our extensive range of Euro Panels to suit

your application. It is supplied complete with a 13A socket* and a fixed 2m mains cable.

For mounting only a 324mm x 133mm cut out is required.

RDM-6VSlide out vertical tower that has 150mm of available space for 6 x 25mm or 3 x 50mm

Euro Panels. Select your requirements from our extensive range of Euro Panels to suit

your application. Constructed from an aluminium extrusion with a moulded top cover,

it is supplied complete with a 13A socket* and a fixed 2m mains cable. For mounting,

only a single 80mm diameter hole is required. Overall diameter is 104mm and the

RDM-6V extends 215mm above the desk. It is rated to IP54 when closed

SDM-6HDesk mounting horizontal module with 150mm of available space for 6 x 25mm or

3 x 50mm Euro Panels. Select your requirements from our extensive range of Euro

Panels to suit your application. Constructed from an aluminium extrusion with moulded

end covers, it is supplied complete with a 13A socket* and a fixed 2m mains cable. It is

only 110mm deep, 88 mm high and 364mm wide. Wider versions are available to order.

* Schuko, CEE7 and IEC alternatives available to order

12 For more details go to www.ikonavs.com/DeskModuleMain

Floor Box PanelsConnection panels

Quick and easy to install floor box panels in both flat and

angled versions and designed to fit most Crabtree, Britmac,

Powerplan and MK floor boxes. Other sizes are available.

The AFB range has been designed with a recess to make

connecting easier and have a flush finish when installed. The

PC versions all have screw terminals for both VGA and Audio

to eliminate the need for soldered connections on site whilst

the HDMi, Displayport and DVI versions utilise angled back

to back connections for use with pre-made cables.

The FBP range is designed to take our standard 25mm and

50mm Euro modules. Custom panel sizes are available on

a short lead time.

Size

101 x 17587 x 17375 x 17566 x 173AFB-66-P1

AFB-75-P1AFB-87-P1AFB-100-P1

Aperture Panel sizeEP-FBP50EP-FBP100

50mm100mm

175 x175mm

For more details go to www.ikonavs.com/FloorboxMain 13

Whilst hard to believe, not all system requirements can be met from

out standard range of products. For the more demanding and unusual

requirements we have a range of control and interface products

specifically engineered for these situations.

Our Pro Solutions range includes:-

ControllersBased upon our Podule system, specialised controllers are available

for use individually or networked together to create diverse control

applications. These are also suitable for mission critical systems

where status feedback and redundancy are required.

Installation AccessoriesThe little problem solvers that often make the difference in delivering

the system your client wants. From a range of din rail mounting audio

and interface adapters through to connection adapters for use in

custom panels, the iKON Pro range contains many useful devices all

designed to make the installer life easier.

PAVA and Fault MonitoringSpecialised products for the distribution and monitoring of critical path

audio using dual redundant fibre-optic or Cat5 networks.

For the complete iKON Pro range vist out specialised website at

www.ikonavs.com/ikonpro

14 For more details go to www.ikonavs.com/Podules

Octo

Euro 8

Wall 15

Wall 16

PNP 8

CIR-R

Chrono

XVGA

Relay 2

Bi-directionalRS232 port Buttons LED's

Infra-redoutputs

InputsOpen

collectoroutputs

8 bi-colourgreen/yellow

8green

10green

16green

8green

Other

user can label buttons

user can label buttons

A range of pre-engravedbuttons are available

A range of pre-engravedbuttons are available

user can label buttons,PodNet only

inputs analog capable+ 2 analog outputs

24 hour, 365 day event timer

4 x 1:2 XVGA and stereo audio switcher

4 inputs analog capable+ 4 x 240v relays

1

2

1

2

1

1

1

1

8

8

15

16

8

2

2

2

2

4+blaster

2

2

2

8

1

8

2

2

2

8

4

PodulesPodule controllers

A range of innovative control interfaces providing easily programmed control for

dedicated applications. Each Podule can be used as a separate intelligent controller

or as part of a more complex system, formed by connecting several Podules together

with low cost CAT5 cabling.

As each Podule is “intelligent” a system can start with a single Podule and then extra units

can be added to create a system using this distributed processing to create diverse control

applications making the Podule ideal for mission critical systems.

Systems can be installer programmed using the supplied software or, using our low-cost

programming service, they can be shipped pre-programmed for your application.

PodulesPodule controllers

Euro 8

Octo

PNP-8

Relay 2

Wall 16

Chrono

Wall 15

XVGA CIR-R

For more details go to www.ikonavs.com/Podules 15

PRO SolutionsModules, adapters, audio

iKONS range of Din-Rail interfaces cover both audio, video and control options

all engineered for quality, reliability and ease on integration.

Just a small selection are shown here, please refer to the website for the complete

range along with technical specifications and application diagrams.

1 into 2 RS232 active splitter

BiDirectional RS232 to RS485 converter

Four SPCO relays with screw terminals

2 x line level audio isolating and balancing

transformers

8 x RS232 controlled open collector outputs.

Ideal for use with the DM-Relay

Twin Hi-Quality microphone pre-amplifier with

phantom power and adjustable gain

Dual balanced line level audio mixing and

distribution amplifier

Unbalanced to balanced line sending amplifier

Four channel, four output CVBS distribution amplifier

DM-232

DM-485

DM-Relay

DM-Balance

DM-Serial

DM-MIC

DM-MIX

DM-Line

DM-VDA4

The iKON AVS DAI mk4 is a fibre-optic audio distribution system for critical systems. It uses dual, continuously monitored redundant fibre rings. If a fault is discovered the signal

path is automatically rerouted through the remaining operation fibres. Inputs and outputs are balanced line level. The control port supports selective paging and channel routing as

well as allowing the connection of a single RS232/RS422/RS485 data channel with a maximum baud rate of 38,400 carried transparently over the same network as the audio.

16 For more options and details go to www.ikonavs.com/ikonpro

No one offers a more comprehensive range of high quality, British made

adapters than iKON AVS. With options covering most analogue and

digital signals, both passive and active formats are available.

A selection of our

adapters

Main

connector

Secondary

connectorComment

DADO-90P

FBA-1

DADO-ST

DADO-STA

HDMI-BB

HDMI-90BB

HDMI-ST

DVI-ST

USB-ST

RJ45-ST

X3-ST

HD15-90

D9-90

SAB-BNC

DAB-BNC

DAB-15D

DAB-ST

AB-25

15 pin D

15 pin D

15 pin D

15 pin D + 3.5 Jack

HDMI

HDMI

HDMI

DVI

USB

RJ45

XLR

15 pin D

9 pin D

15 pin D

15 pin D x 2

15 pin D x 2

15 Pin D x 2

L+R phono

15 pin D

5 BNC

ST

ST

HDMI

HDMI

ST

ST

ST

ST

ST

15 pin D

9 pin D

5 BNC

5 BNC

15 pin D

ST

ST

90 deg

in-line

90 deg

90 deg

90 deg

active buffer

2 x active buffer

2 x active buffer

active buffer

active balanced

ST = Screw terminal

UK Manufacturer

Advice and Technical Services

Stock Items & Delivery

Extensive warranties

CE conformity

Energy Saving

Technical SupportCommitted to providing the very best support IKON AVS can be contacted on

+44 (0)1299 250991

e-mail support@ikonavs.com

web www.ikonavs.com

IKON AVS is an electronic engineering and manufacturing company based near Kidderminster in the heart of England. Our

products are available direct or through distributors and dealers throughout the world. For dealer and OEM enquiries please

contact us directly at sales@ ikonavs.com

Getting it right for our customer and the end user is paramount. We provide help in the form of advice in specifying systems

all the way to application diagrams. What's more our highly qualified engineers are available to speak to you direct.

Standard products are available from stock here in the UK making delivery fast and efficient. Non-stock items and custom

variants are available.

Our ethos is 'Reliability Through Quality and Simplicity' therefore we aim to make the need for warranty unnecessary however

for your peace of mind extensive warranties are included with our products. All iKON AVS products are backed by a3-year

parts and labour warranty. With selected products carry a lifetime warranty against breakage.

For your peace of mind all our products carry the CE mark. This ensures that products meet the essential requirements of

all relevant EU directives for electrical safety, emissions and immunity to external interference.

Most products have energy saving features such as automatic shutdown and links to PIR sensors.

iKON AVS Ltd,

Unit 238, Ikon Trading Estate,

Droitwich Rd, Hartlebury,

Worcestershire, DY10 4EU

United Kingdom.

Tel: +44 (0) 1299 250991 Fax: +44 (0) 1299 250983email: sales@ikonavs.com web: www.ikonavs.com