ACOUSTIC UNDERLAYMENTInstaLay 30 is a high performance acoustic underlay made from recycled rubbercrumb that significantly reduces impact sound at source
BENEFITS� Excellent acoustic and thermal insulation� Suitable for bonding to all types of structural floor� Suitable for single and double-stick applications� Significantly reduces impact sound at source� High quality and durable – will not deteriorate or collapse� Gives exceptional comfort, stability and performance� Can be used with under-floor heating systems� Guaranteed for 10 years
APPLICATIONS� Suitable for sheet vinyls, all types of carpet, carpet tiles,
laminates and wood floors� NBS Clauses available for K21 & M50
InstaLay 30Acoustic underlay manufacturedfrom recycled rubber.
Roll width: 1000mmRoll length: 15mRoll thickness: 3mm
(Also available in aPeel & Stick option)
Acoustic PerformanceWeighted reductionin impact sound: 21dB
PRODUCTSPECIFICATION
InstaLay 30
InstaLay 30
Screed
The InstaLay system has the benefit of being supported internally by recycled vulcanized rubbercrumb granules, unlike traditional foam and textile underlays.The advantages are that when InstaLayis compressed the rubber granules provide outstanding cushioning performance but, when thepressure is released, these granules immediately return to their original shape. In addition to beingnon-collapsing, they will not degrade over time and have excellent acoustic and thermal properties.
InstaLay is also available with an innovative Peel & Stick self-adhesive membrane. By significantlyreducing the need for adhesive, this InstaLay system revolutionises the way in which carpets, sheetflooring and wood floors are fitted by reducing labour times by over 50% to enable rapid, high quality,single and double-stick installations without mess and delays.
Insta House, Ivanhoe Road,Hogwood Business Park,
Finchampstead, Wokingham,Berkshire. RG40 4PZ. UK
Tel: +44 (0)118 973 9560Fax: +44 (0)118 973 9547
Email: [email protected]
www.instafloor.co.uk
PERIMETER DETAIL SECTIONS
ADHESIVE SPECIFICATION
� Wood floor installations – Install InstaLay 30 to the perimeter of the room andisolate the skirting from the wood floor to avoid flanking sound transmission.
Alternatively you can use the InstaLay Peel & Stick system which incorporates an adhesivemembrane to bond the floor finish to the underlay. Please see the applications below:
Note - The information in both tables is for general guidance. We would advise before eachinstallation to check with the adhesive manufacturer to ensure that the adhesive being used iscorrect for the specific floor finish and sub floor on your project. The adhesive specified aremanufactured by F. Ball and Co. Ltd.
ACOUSTIC PERFORMANCE
� Weighted reduction of impact sound pressure level (∆Lw) 21dB.Measured in accordance with BS EN ISO 140-8:1998 and calculated inaccordance with BS EN ISO 717-2:1997
NBS CLAUSES� K21 Wood strip / board fine flooring / linings
• 111 WOOD FLOATING FLOOR • 115 WOOD LAMINATE FLOORING
• 145 COMPOSITE LAMINATE FLOORING • 146 LAMINATE FLOORING
� M50 Rubber / plastic / cork / lino / carpet tiling / sheeting
• 110 TILING • 130 CARPET TILING • 138 NEEDLED CARPET TILING
• 146 NEEDLED PILE CARPET TILING • 150 SHEETING
• 155 PVC SHEET FLOORING IN SPECIAL WET AREAS • 170 CARPETING
• 178 NEEDLED CARPETING • 186 NEEDLED PILE CARPETING
ACOUSTIC UNDERLAYMENTInstaLay 30
Insta House, Ivanhoe Road, Hogwood Business Park, Finchampstead, Wokingham, Berkshire. RG40 4PZ. UKTel: +44 (0)118 973 9560 • Fax: +44 (0)118 973 9547Email: [email protected] • Website: www.instafloor.co.uk
Skirting
InstaLay 30
Hardwood Flooring
Skirting
InstaLay 30
Carpet / Sheet Flooring
Floor Finish Adhesive AdhesiveUnderlay to sub floor Floor finish to underlay
Wood DO NOT bond to sub floor To be floating floor layer
Sheet Vinyl F40 (Dual bond) or F3 F44
Carpet F40 (Dual bond) or F3 F3(Double stick applications)
Carpet No bond F3(Single stick applications)
Carpet Tiles F40 (Dual bond) or F3 F41
Floor Finish Adhesive AdhesiveUnderlay to sub floor Floor finish to underlay
Wood - solid/engineering DO NOT bond to sub floor InstaLay 30hg high grab Peel & Stick
Wood - click systems DO NOT bond to sub floor InstaLay 30lg low grab Peel & Stick
Sheet Vinyl F40 (Dual bond) or F3 InstaLay 30hg high grab Peel & Stick
Carpet F40 (Dual bond) or F3 InstaLay 30hg high grab Peel & Stick(Double stick applications)
Carpet No bond InstaLay 30hg high grab Peel & Stick(Single stick applications)
Carpet Tiles F40 (Dual bond) or F3 InstaLay 30lg low grab Peel & Stick