Not for
Reprod
uctio
n
Illustrated Parts List
Portable Generator
This generator is rated in accordance with CSA (Canadian Standards Association) standard C22.2 No. 100-94 (motor and generators).
Questions? Help is just a moment away!Preguntas? La ayuda es justa un momento lejos!
Call: Portable Generator HelplineLlame: Línea Directa del Generador portátil - 1-800-732-2989 M-F 8-5 CST
Revision -Manual Part No. 1756394
Rev. Date: 1/8/2013
Mfg. No. Description / DescripciónModel / Modelo
030556-00 10,000 Watt Briggs & Stratton
Not for
Reprod
uctio
n
Not for
Reprod
uctio
n
Table Of Contents
Torque Specification Chart ..................................................................... Inside Back Cover
PRODUCT COMPONENTS PAGESMain Unit .............................................................................................................................................................. 4Alternator .............................................................................................................................................................. 7Control Panel ....................................................................................................................................................... 8Wheel Kit .............................................................................................................................................................. 9
Not for
Reprod
uctio
n
Main Unit317842NOTE: Unless noted otherwise,
use the standard hardware torque specification chart.
PART NO. DESCRIPTIONREF.
Footnotes
PART NO. DESCRIPTIONREF.CRADLE (Includes Ref. Nos. 20, 31 & 36) 1 317778BXGS
MOUNT, Vibration 2 38353GS
CRIMPTITE 3 56893GS
ADAPTER, Engine 4 190220GS
ALTERNATOR 5 -----
* NUT, Hex, M8-1.25 6 -----
GROMMET 7 62265GS
WASHER 8 96796GS
KIT, Hardware, Heat Shield 9 194208GS
SCREW 10 190274BGS
SCREW 11 187365DGS
WIRE 12 189302SGS
* CAPSCREW, Hex Head, M8 - 1.25 x 16 13 -----
* WASHER, Shakeproof, Ext. 5/16 14 -----
* WASHER, Shakeproof, Ext. M6 15 -----
SUPPORT, Engine 16 77304BXGS
SCREW 17 2830598SM
MOTOR, Stepper 18 195404GS
SUPPORT, Heat Shield 19 93074BRGS
DECAL 20 B4986GS
MOUNT, Vibration 21 194155GS
NUT 22 87680GS
* CAPSCREW, Hex Head, M6-1 x 40 23 -----
HEATSHIELD 24 194951GS
CAP 25 191190GS
TAPTITE 26 74908GS
* CAPSCREW, Hex Head, M8 - 1.25 x 20 27 -----
* WASHER, Lock, 5/16 M8 28 -----
* CAPSCREW, Hex Head, M8 - 1.25 x 25 29 -----
KIT, Hardware, Throttle Linkage 30 194543GS
DECAL 31 196830GS
* NUT, 1/4-20 32 -----
* WASHER, Lock, 1/4 33 -----
* Items without part numbers are common fasteners and are available at your local hardware store.
** Contact engine manufacturer for parts and service.
4
The above parts group applies to the following Mfg. Nos.:
Briggs & Stratton Power Products Group, LLCCopyright © by Briggs & Stratton CorporationMilwaukee, WI, USA. All rights reserved
20121756394
030556-00 - 10,000 Watt Briggs & Stratton
Not for
Reprod
uctio
n
Main Unit317842NOTE: Unless noted otherwise,
use the standard hardware torque specification chart.
PART NO. DESCRIPTIONREF.
Footnotes
PART NO. DESCRIPTIONREF.COVER, Rear Bearing 34 195422GS
KIT, Fuel Hose (Cut to Fit) 35 791745
DECAL 36 208538GS
SCREW 37 B2153GS
SCREW 38 192376GS
BOLT 39 B4300GS
KIT, Hardware, Fuel Tank 40 198221GS
VALVE, Fuel 41 310574GS
SCREW 42 794821
CONTACTOR, Start 43 691656
TANK, Fuel (Includes Ref. 41) 44 202954GS
CAP, Fuel 45 314951GS
NUT 46 67989GS
NUT 47 77395GS
WIRE 48 14353621GS
LINK, Stepper Motor 49 95920GS
DECAL 50 202997GS
DECAL 51 194799GS
DECAL 52 94480GS
HOSE, Vapor 53 315017GS
PLATE, Adjustment 54 95349GS
DECAL 55 197797GS
DECAL 56 188333GS
KIT, Fuel Valve Repair 57 189759GS
PANEL, Control 58 318054GS
* WASHER, Shakeproof, Ext. #10 59 -----
SUPPORT, Battery Tray 60 193512GS
BRACKET 61 95348GS
LINK, Bell Crank 62 95921GS
SPRING 63 96717GS
CLAMP 64 690898
* CAPSCREW, Hex Head, M8 - 1.25 x 16 65 -----
BRACKET 66 200107GS
SPARK, Arrester 67 794945
* Items without part numbers are common fasteners and are available at your local hardware store.
** Contact engine manufacturer for parts and service.
5
The above parts group applies to the following Mfg. Nos.:
Briggs & Stratton Power Products Group, LLCCopyright © by Briggs & Stratton CorporationMilwaukee, WI, USA. All rights reserved
20121756394
030556-00 - 10,000 Watt Briggs & Stratton
Not for
Reprod
uctio
n
Main Unit317842NOTE: Unless noted otherwise,
use the standard hardware torque specification chart.
PART NO. DESCRIPTIONREF.
Footnotes
PART NO. DESCRIPTIONREF.TRAY, Battery 68 192985GS
BATTERY 69 193043GS
* CAPSCREW, Hex Head, M6-1 x 12 70 -----
* CAPSCREW, Hex Head, 3/8-16 x 3/4 71 -----
* WASHER, Lock, 3/8 72 -----
* NUT, 3/8-16 73 -----
KIT, Hardware, Battery 74 193347GS
MUFFLER 75 692099
WIRE 76 185939TGS
CANISTER 77 318304GS
WIRE 78 189302RGS
CLAMP 79 315831GS
JACK, Coaxial 80 201348GS
SWITCH, ON/OFF 81 87799GS
DECAL 82 198800GS
DECAL 83 197159GS
BRACKET 84 200816GS
WIRE 85 312236GS
WIRE 86 312239GS
TAPTITE 87 90388GS
LUG 88 192351GS
SCREW 89 690661
BRACKET 90 691513
** ENGINE 900 -----
MANUAL, Operator's (Not Illustrated) -- 317798GS
OIL (Not Illustrated) -- BB3061GS
OIL (Not Illustrated) -- BB3061BGS
CHARGER, Battery (Not Illustrated) -- B4177GS
PLUG (Not Illustrated) -- 43438GS
PLUG (Not Illustrated) -- 37806GS
CABLE, Battery Charger (Not Illustrated) -- 65787GS
* Items without part numbers are common fasteners and are available at your local hardware store.
** Contact engine manufacturer for parts and service.
6
The above parts group applies to the following Mfg. Nos.:
Briggs & Stratton Power Products Group, LLCCopyright © by Briggs & Stratton CorporationMilwaukee, WI, USA. All rights reserved
20121756394
030556-00 - 10,000 Watt Briggs & Stratton
Not for
Reprod
uctio
n
Alternator204848NOTE: Unless noted otherwise,
use the standard hardware torque specification chart.
PART NO. DESCRIPTIONREF.
Footnotes
PART NO. DESCRIPTIONREF.ADAPTER, Alternator 1 209599GS
ROTOR 2 191952GS
STATOR 3 205062GS
CARRIER, Bearing 4 186060GS
BOLT 5 66449LGS
BRUSH ASSEMBLY 6 66386GS
TAPTITE 7 66849GS
* LOCKWASHER, 1/4-M6 8 -----
PIN 9 81917GS
RECTIFIER, Battery Charge 10 65795GS
TAPTITE 11 66849CGS
BEARING 12 65791GS
REGULATOR, Voltage 13 205858GS
* Items without part numbers are common fasteners and are available at your local hardware store.
7
The above parts group applies to the following Mfg. Nos.:
Briggs & Stratton Power Products Group, LLCCopyright © by Briggs & Stratton CorporationMilwaukee, WI, USA. All rights reserved
20121756394
030556-00 - 10,000 Watt Briggs & Stratton
Not for
Reprod
uctio
n
Control Panel80005076NOTE: Unless noted otherwise,
use the standard hardware torque specification chart.
PART NO. DESCRIPTIONREF.
Footnotes
PART NO. DESCRIPTIONREF.PANEL, Control 1 318056GS
BOX, Control Panel 2 201864GS
* WASHER, Flat, #10-M5 3 -----
* LOCKWASHER, M5 4 -----
* SCREW, Phillips Head, M5 - 0.8 x 12 5 -----
* WASHER, Shakeproof, M6 - 1/4, INT. 6 -----
SWITCH, ON/OFF 7 78653GS
SWITCH, ON/OFF 8 82538GS
METER, Hour 9 202602GS
BREAKER, Circuit, 30A 10 202033GS
OUTLET, 125/250V 50A 11 B4262GS
OUTLET, 12VDC 12 90418GS
RELAY 13 77314GS
BREAKER, Circuit, 10A 14 87962GS
TRANSFORMER 15 84028GS
STANDOFF 16 64525GS
BOARD, Idle Control 17 195406GS
BOOT 18 77681GS
BLOCK, Terminal, 50A 19 92953GS
BOOT 20 188632GS
BREAKER, Circuit, 20A 21 202394GS
CONNECTOR 22 199528GS
TUBING, Fabric 23 201171GS
BRACKET 24 192931GS
GROMMET 25 62265GS
BREAKER, Circuit, 50A 26 192828FGS
OUTLET, 120V, TL30A 27 68868GS
OUTLET, 120/240V, TL30A 28 43437GS
OUTLET, 120V 20A 29 68759GS
STRIP, Dual Row 30 199532GS
BLOCK, Terminal 31 193597GS
* Items without part numbers are common fasteners and are available at your local hardware store.
8
The above parts group applies to the following Mfg. Nos.:
Briggs & Stratton Power Products Group, LLCCopyright © by Briggs & Stratton CorporationMilwaukee, WI, USA. All rights reserved
20121756394
030556-00 - 10,000 Watt Briggs & Stratton
Not for
Reprod
uctio
n
Wheel Kit204975NOTE: Unless noted otherwise,
use the standard hardware torque specification chart.
PART NO. DESCRIPTIONREF.
Footnotes
PART NO. DESCRIPTIONREF.WHEEL 1 203273GS
* WASHER, 5/8 2 -----
AXLE 3 191267TGS
E-RING 4 191265GS
BRAKE 5 205135GS
* SCREW-1/4-20 x 3/8 6 -----
HANDLE, With Grip 7 B193200GS
GRIP, Handle -- 198669GS
* WASHER, Flat, 5/16-M8 8 -----
* NUT, Nylock, M8 - 1-1/4 9 -----
* CAPSCREW, Hex Head, M8 - 1-1/4 x 45 10 -----
* WASHER, Nylon, 1.2 x 0.346 x 0.03 11 -----
PIN 12 B4135GS
KIT, Hardware, Wheel (Not Illustrated) -- 205183GS
* Items without part numbers are common fasteners and are available at your local hardware store.
9
The above parts group applies to the following Mfg. Nos.:
Briggs & Stratton Power Products Group, LLCCopyright © by Briggs & Stratton CorporationMilwaukee, WI, USA. All rights reserved
20121756394
030556-00 - 10,000 Watt Briggs & Stratton
Not for
Reprod
uctio
n
Not for
Reprod
uctio
n
in/lbsft/lbs
3
Torque Specification ChartFOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%)
PropertyClass
Class 8.8 Class 10.9 Class 12.9
Size OfHardware Nm. Nm. Nm. Nm.
M3 1.282.905.75
9.916.5
244883
132200275390530375995
1350183023603050
13.44 1.804.108.10
14233467
117185285390550745960
14001900258033104290
19.2 22.92 2.15M4 30.72 43.44 52.56 4.95M5 60.96 5.97 7.15
16.59.7
M6 7.3 10.3 12.1M7 12.1 16.9 19.9 27M8 17.7 25 29 40M10 35 50 59 81M12 61 86.2 103 140M14 101 136 162 220M16 147 210 250 340M18 202 287 346 470M20 290 405 486 660M22 390 559 656 890M24 497 708 840 1140M27 733 1032 1239 1680M30 995 1401 1681 2280M33 1349 1902 2278 3090M36 1740 2441
37982935 3980
M39 2249 3163
Torque Specification ChartFOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
HardwareGrade
SAE Grade 2 SAE Grade 5 SAE Grade 8
Size Ofin/lbsft/lbs
in/lbsft/lbs
in/lbsft/lbs
in/lbs in/lbsHardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32 19 2.1 30 3.4 41 4.68-36 20 2.3 31 3.5 43 4.910-24 27 3.1 43 4.9 60 6.810-32 31 3.5 49 5.5 68 7.71/4-20 66 7.6 8 10.9 12 16.31/4-28 76 8.6 10 13.6 14 19.05/16-18 11 15.0 17 23.1 25 34.05/16-24 12 16.3 19 25.8 29 34.03/8-16 20 27.2 30 40.8 45 61.23/8-24 23 31.3 35 47.6 50 68.07/16-14 30 40.8 50 68.0 70 95.27/16-20 35 47.6 55 74.8 80 108.81/2-13 50 68.0 75 102.0 110 149.61/2-20 55 74.8 90 122.4 120 163.29/16-12 65 88.4 110 149.6 150 204.09/16-18 75 102.0 120 163.2 170 231.25/8-11 90 122.4 150 204.0 220 299.25/8-18 100 136 180 244.8 240 326.43/4-10 160 217.6 260 353.6 386 525.03/4-16 180 244.8 300 408.0 420 571.27/8-9 140 190.4 400 544.0 600 816.07/8-14 155 210.8 440 598.4 660 897.61-8 220 299.2 580 788.8 900 1,244.01-12 240 326.4 640 870.4 1,000 1,360.0
Hex Head Capscrew
Hex Nut
Lockwasher
Washer
Carriage Bolt
NOTES1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread formingscrews, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:a. for prevailing torque locknuts - use 65% of grade 5
torques.b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
Hardware Identification & Torque Specifications
Common Hardware Types
NoMarks
The guides and ruler furnished below are designed tohelp you select the appropriate hardware.
8.8 10.9 12.9
Class 5.6
5.6
5150
13.44 1.285.88
26.4 2.5044.64 4.3
5.2 7.17.7 10.515 21
988 1340759 1030590 800435 590320 435217 295169 230126 171
89 12164 8842 5826 36
.56
ThreadDiameter (mm)
Screw, 1/2- 16 x 2
BodyDiameter
Diameter
InsideDiameter (in)
Nut, 1/2-16
01/4 3/41/2 21
1/4 3/41/2 1/4 3/41/2 1/4 3/41/2 4
90 10070 8050 6030 400 10 20
ThreadDiameter (mm)
Nut, M8 Screw, M8- 1.25 x 25
Distance between threads (mm)
BodyLength (in)
BodyLength (mm)
3/8” Bolt or NutWrench—9/16”
5/16” Bolt or NutWrench—1/2”
1/4” Bolt or NutWrench—7/16”
1/2” Bolt or NutWrench—3/4”
7/16” Bolt or NutWrench (Bolt)—5/8”Wrench (Nut)—11/16”
in/lbs
Threads per inch
Threads per inch
Body Length
Body
When a washer or nut is identified as 1/2” (M8), this is the Nominal size, meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a second number is presentit represents the threads per inch (distance between threads).
When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50 ),this means the Nominal size, or body diameter is 1/2 inch (8mmmetric thread diameter), the second number,16, represents the threads per inch, (1.25 thread diameter). The final number is the body length of the bolt or screw, 2 inches (50mm).
Standard Hardware Sizing
M6 Bolt or NutWrench—10mm
M8 Bolt or NutWrench—13mm
M10 Bolt or NutWrench—17mm
M12 Bolt or NutWrench—19mm
M14 Bolt or NutWrench—22 mm
Wrench & Fastener Size Guide
Not for
Reprod
uctio
n
2012
Briggs & Stratton Power Products Group
Copyright© Briggs & Stratton Power Products Group. All rights reserved. No part of this page can bereproduced or transmitted in any form by any means without the express written permission of Briggs &Stratton Power Products Group.