iMICRO are synthetic microfibers for concrete produced with 100% virgin polypropylene in microfilaments. Used to drastically reduce the formation of cracks from plastic shrinkage in concrete.
iMICRO fibers were specifically designed for use in concrete and mortars, are resistant to alkali, have zero absorption and are totally non-corrosive.
iMICRO fibers can be used for all applications where it is important to reduce the formation of cracks to increase durability of the concrete.
iMICRO fibers are also appropriate for concrete with open finishes, since they are invisible in the finished work.
The use of iMICRO is not to be intended as a substitute for primary and secondary structural reinforcement of concrete.
The dosages can vary from 0.8 to 3 kg/m3.
They are available in three different sizes (6/12/18 mm) according to the type of application being used.
iMICRO fibers disperse evenly into the concrete mixture, do not create sediment, nesting or lumps, even in larger doses.
iMICRO is ideal for
• buildingrestorationandrecovery• printedfloors• precastproducts• mortarsandplasters
The advantages of iMICRO
• itreducesshrinkagecracks• itislightandsimpletouse• ithasananti-spallingeffect in case of fire• itdoesnotaltertheworkability of reinforced concrete• itdispersesevenly without forming lumps
iMICRO è ideale per
• restaurierecuperiedilizi• pavimentistampati• manufattiprefabbricati• malteedintonaci
I vantaggi di iMICRO
• riduzionedellefessuredaritiro• leggereesemplicidausare• contributoantispallingincaso diincendio• nonalteranolalavorabilitàdelcls• sidisperdonoinmodouniforme senzaformarenidi
Microfibers for fiber reinforced concrete. Le microfibre per calcestruzzi fibrorinforzati.
iMICRO sono microfibre sinteticheper calcestruzzo prodot te conpolipropilene vergine al 100% sottoforma di microfilamento. Servono aridurre drasticamente la formazionedi fessurazioni da ritiro plastico delcalcestruzzo.
LefibreiMICROsonostateconcepitespecif icatamente per ut i l izzi incalcestruzziemalte,sonoresistentiaglialcali,hannoassorbimentonulloesonoassolutamentenoncorrosive.
Le fibre iMICRO possono essereutilizzatepertuttequelleapplicazioniovesiaimportanteridurrelaformazionedifessurazionialfinediaumentareladurabilitàdelcalcestruzzo.
LefibreiMICROsonoindicateanchepercalcestruzziconfinituraavistainquantoaoperafinitarisultanoinvisibili.
L’utilizzodi iMICROnonpuòessereintesoqualesostituzionenel rinforzostruturale primario e secondario delcalcestruzzo.
I dosaggi possono variare da 0,8 a3kg/m3.
Sonodisponibili intrediversemisure(6/12/18mm) a seconda del tipo diapplicazione.
Possono essere inserite pressol’impiantodibetonaggioodirettamenteinbetonieragraziealloroconfezionamentoinsacchettiidrosolubili.
Le fibre iMICRO si disperdono inmodouniformeall’internodellamatricecementizia, non sedimentano e noncreanonidioappallottolamentiancheafortidosaggi.
Method of use
The fibers, even in elevated quantities, disperse evenly into the concrete mixture, do not create segregation phenomena or impede workability.Pour all of the necessary components to create the mixture into the concrete mixing plant or mixer, then pour in one bag of fibers every 30 seconds.Once loading is finished, set the mixer to maxi-mum rotation speed for five minutes to properly mix the components and fibers.Adjust the consistency to the desired values using super-fluidifying additives, do not add extra water to the mixture.If the mixture is prepared in a concrete mixing plant, the fibers must be inserted first, followed by the water, aggregates and finally the cement. Then mix.
The information contained herein reflects the most current knowledge that the company has acquired on the product as of the date of publishing.This information is provided for the sole purpose of permitting use of the product in the most proper and safe manner.The company denies any and all responsibilities, direct and indirect, for damages caused by impro-per or careless use, non-compliance with legal standards and non-adherence to procedures and dosages as indicated.
Modalità d’uso
Le fibre, anche in quantitativi elevati si disper-dono inmodoomogeneonel conglomerato ce-mentizio, nondanno luogoa segregazionee apenalizzazioniallalavorabilità.Versare nella autobetoniera o nella betonieratuttiicomponentinecessariaformarel’impasto,dopodichèversareunsaccodifibreogni30se-condi.Alterminedelcaricamento,impostareper5mi-nuti lamassimavelocitàdirotazionealloscopodiamalgamarealmeglioicomponentielefibre.Adeguare la consistenzaai valori desiderati at-traverso l’impiego di additivi superfluidificanti,nonaggiungereulterioreacquaall’impasto.Se lamiscelazioneavviene in centraledi beto-naggiodevonoessereinseriteperprimolefibre,poil’acqua,poigliaggregati,perultimoilcemen-toemiscelare.
Leinformazioniriportateinquestaschedacorri-spondonoallamiglioreconoscenzachel’aziendahamaturatosulprodottoalladatariportata.Taliinformazionivengonoforniteconl’unicosco-podiconsentire l’utilizzodelprodottonelmodopiùcorrettoesicuro.Sideclinaogniresponsabilità,direttaedindiretta,perdanniderivantidaunusoimproprioosconsi-derato,dallamancataapplicazionedellenormedileggeedalmancatorispettodelleprocedureedeidosaggiindicati.
Composition Composizione
polymer poliolefine
Appearance Aspetto
monofilaments / micro fibers monofilamenti/microfibre
Available lengths Lunghezzedisponibili
mm 6/12/18 (minimum tolerance ± 3%)mm6/12/18(tolleranzaminimaprevista±3%)
Equivalent diameter Diametroequivalente
µ 19.8 (minimum tolerance ± 3%)µ19,8(tolleranzaminimaprevista±3%)
Color Colore
white bianco
Specific weight Pesospecifico
approx. 0.91 g/dm3
ca0,91g/dm3
Ultimate strength Tensionearottura
approx. 400-500 MPa in trazione ca400-500MPaintrazione
Elastic module Moduloelastico
approx. 7-9 GPaca7-9GPa
Water absorption Assorbimentoacqua
absent assente
Resistance to acids Resistenzaagliacidi
excellent ottima
Fusion point Puntodifusione
> 160°C>160°C
Packaging
Imballaggio
water soluble transparent bags 900 g each or nylon bags 25 kg each sacchiidrosolubilitrasparentidag900cad.osacchettiinnylondakg25cad.
Dosages Dosaggi
from 0.8 to 3 kg/m3 according to desired performance da0,8a3kg/m3inrelazioneallaprestazionedesiderata
iSTRiCE® - Fili&Forme srl - via del Lavoro, 1041018 S. Cesario s/P. (MO) - ItalyTel. +39 059 951142 - Fax +39 059 [email protected] - www.fibreistrice.com